Commit Graph

15 Commits

Author SHA1 Message Date
Thomas Gleixner 24c9d96ddb treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 265
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this driver is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this software if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 8 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.861653206@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:30:28 +02:00
Sean Young 183e19f5b9 media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macros
This can be done with c99 initializers, which makes the code cleaner
and more transparent. It does require gcc 4.6, because of this bug
in earlier versions:

	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676

Since commit cafa0010cd ("Raise the minimum required gcc version to
4.6"), this is the case.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 14:22:27 -04:00
Sean Young 6d741bfed5 media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*
RC_TYPE is confusing and it's just the protocol. So rename it.

Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 10:02:48 -04:00
Sean Young 518f4b26be media: rc-core: rename input_name to device_name
When an ir-spi is registered, you get this message.

rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

"Unspecified device" refers to input_name, which makes no sense for IR
TX only devices. So, rename to device_name.

Also make driver_name const char* so that no casts are needed anywhere.

Now ir-spi reports:

rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 09:43:52 -04:00
Andi Shyti 0f7499fddb [media] rc-main: assign driver type during allocation
The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:59:57 -02:00
Sean Young 8c34b5c4c8 [media] rc: raw IR drivers cannot handle cec, unknown or other
unknown and other are for IR protocols for which we have no decoder,
so the raw IR drivers have no chance of generating them. cec is not
an IR protocol.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 12:40:50 -02:00
Markus Elfring 4b8a826208 HID: picoLCD: Deletion of unnecessary checks before three function calls
The functions backlight_device_unregister(), lcd_device_unregister() and
rc_unregister_device() test whether their argument is NULL and then
return immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-06-29 14:51:12 +02:00
David Härdeman c5540fbb9d [media] rc-core: remove protocol arrays
The basic API of rc-core used to be:

	dev = rc_allocate_device();
	dev->x = a;
	dev->y = b;
	dev->z = c;
	rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

	dev = rc_allocate_device();
	dev->x = a;
	rc_set_allowed_protocols(dev, RC_BIT_X);
	dev->z = c;
	rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:10:43 -03:00
James Hogan 1a1934fab0 [media] rc: abstract access to allowed/enabled protocols
The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11 13:24:39 -03:00
Bruno Prémont 1cde501bb4 HID: picolcd: Prevent NULL pointer dereference on _remove()
When picolcd is switched into bootloader mode (for FW flashing) make
sure not to try to dereference NULL-pointers of feature-devices during
unplug/unbind.

This fixes following BUG:
  BUG: unable to handle kernel NULL pointer dereference at 00000298
  IP: [<f811f56b>] picolcd_exit_framebuffer+0x1b/0x80 [hid_picolcd]
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in: hid_picolcd syscopyarea sysfillrect sysimgblt fb_sys_fops
  CPU: 0 PID: 15 Comm: khubd Not tainted 3.11.0-rc7-00002-g50d62d4 #2
  EIP: 0060:[<f811f56b>] EFLAGS: 00010292 CPU: 0
  EIP is at picolcd_exit_framebuffer+0x1b/0x80 [hid_picolcd]
  Call Trace:
   [<f811d1ab>] picolcd_remove+0xcb/0x120 [hid_picolcd]
   [<c1469b09>] hid_device_remove+0x59/0xc0
   [<c13464ca>] __device_release_driver+0x5a/0xb0
   [<c134653f>] device_release_driver+0x1f/0x30
   [<c134603d>] bus_remove_device+0x9d/0xd0
   [<c13439a5>] device_del+0xd5/0x150
   [<c14696a4>] hid_destroy_device+0x24/0x60
   [<c1474cbb>] usbhid_disconnect+0x1b/0x40
   ...

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-02 13:36:50 +02:00
Benjamin Tissoires d881427253 HID: use hid_hw_request() instead of direct call to usbhid
This allows the hid drivers to be independent from the transport layer.

The patch was constructed by replacing all occurences of
usbhid_submit_report() by its hid_hw_request() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.

Finally, few drivers still depends on USB_HID. Many of them
are requiring the io wait callback. They are found in the next patch.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For the sensor-hub part:
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25 13:26:41 +01:00
David Härdeman c28eb66292 [media] hid-picolcd_cir: fix compilation
Commit c003ab1bed ("[media] rc-core: add separate defines for
protocol bitmaps and numbers") overlooked hid-picolcd.
This patch (against git.linuxtv.org/media_tree.git, branch
staging/for_v3.8) fixes the compilation breakage.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-31 17:52:15 -02:00
Dan Carpenter 02d9be1aa6 HID: picoLCD: fix a NULL test in picolcd_raw_cir()
Smatch complains that the NULL checking in this function is not
consistent and could lead to a NULL dereference.  The comments say that
we should return here if rc_dev is NULL so I've changed the test to
match the comment.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-08 21:19:07 +02:00
Bruno Prémont ae08e32414 HID: picoLCD: Add support for CIR
Implement support for picoLCD's CIR header using RC_CORE for decoding
the IR event stream.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-05 11:48:07 +02:00
Bruno Prémont fabdbf2fd2 HID: picoLCD: split driver code
In order to make code maintenance easier, split the vairous
functions into individial files (this removes a bunch of #ifdefs).

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-15 10:08:57 +02:00