Commit Graph

829 Commits

Author SHA1 Message Date
Takashi Iwai 68538bf2bc ASoC: Updates for v3.12
- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
   regressions in the special cases for non-DAPM CODECs and make it
   easier to integrate with other components on boards.  All existing
   drivers have had some level of DAPM support added.
 - A lot of cleanups in DAPM plus support for maintaining controls in a
   specific state while a DAPM widget all contributed by Lars-Peter Clausen.
 - Core helpers for bitbanged AC'97 reset from Markus Pargmann.
 - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
   Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
   machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
   Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
   Microelectronics WM8997.
 - Support for building drivers that can support it cross-platform for
   compile test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSF0rqAAoJELSic+t+oim9YK0P/0CwP7lAjL87EF+dUKW51raB
 7K8xtOgObec1+Fnc1FEbN6us1hXRkjZJMJyRqa3DO5EaNM5TUoxUa/+MNsKmyGXs
 UhoW7J2TUizxgStxszXdxLEZG5oErxwCtJR3xlIkAq4kcnUI0LwRtGctmguZH74a
 UFxd34tcq8LxytvBp1HaNgaG1OQqIqYUNHYXKCwZZMJRxk8TQU9NfAzlCOtWfPWp
 jjdsBkX6bypWzSV/0P8rdSvjhHlJ1vBw3XTD9jD1/EuC5J7qqKQvwo5Oid98QHiv
 /guV0zx6EPdW5IgyGVvlyc4e5zLrtrckj05Kjyy426mZUpLmGoQCPj+ZAZA+jdqo
 qX3M9lXdisx4FI1Ke+y00G64q9fOuNEyjHKnoMPbZXC7zBTLPC8znncM6Xk5MOx/
 Y+fSChecYzkCrBJqHZGUcMdl0/xL1cRrH6BP2I5ISn5ruEjmTuj3dD0JTUVRi1HM
 KGrLP6TnuY+yBMhoqbGsH7YtNN5NDbqnJrUXQy82GGHH++LlHs/0ljDdOCuwX774
 qu1PsyTwrBvCU9erJS4yTG1KIiFFLTn+exPvUOyjaTFVbs8PoX2NOC4/Ihqj+dvU
 UDj/Lh+/zF2BzrkxN65BwuXULElxjtoFvleWLzt7V8qOCb5LOzBVW8a7f5HQzfU6
 LsEXDtB4VkjGjOGAAsII
 =qzif
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.
2013-08-23 14:12:22 +02:00
Maksim A. Boyko 140d37de62 ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
Add the volume control quirk for avoiding the kernel warning
for the Logitech HD Webcam C525
as in the similar commit 36691e1be6
for the Logitech HD Webcam C310.

Reported-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Tested-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10.5+
Signed-off-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 14:55:20 +02:00
Clemens Ladisch aa773bfe8f ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
Commit aafe77cc45 (ALSA: usb-audio: add support for many Roland/Yamaha
devices) had several logic errors that prevented create_auto_midi_quirk
from enumerating any MIDI ports.

Reported-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 4c2aee0032 ALSA: 6fire: make buffers DMA-able (midi)
Patch makes midi output buffer DMA-able by allocating it separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 5ece263f1d ALSA: 6fire: make buffers DMA-able (pcm)
Patch makes pcm buffers DMA-able by allocating each one separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Andy Shevchenko 663819fb7d ALSA: don't push static constants on stack for %*ph
There is no need to pass constants via stack. The width may be explicitly
specified in the format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 12:04:18 +02:00
Clemens Ladisch 57e6dae108 ALSA: usb-audio: do not trust too-big wMaxPacketSize values
The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.

Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.35+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 11:37:34 +02:00
Jussi Kivilinna ddb6b5a964 ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
Patch fixes 6fire not to use stack as URB transfer_buffer. URB buffers need to
be DMA-able, which stack is not. Furthermore, transfer_buffer should not be
allocated as part of larger device structure because DMA coherency issues and
patch fixes this issue too.

Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-07 16:04:27 +02:00
Eldad Zack e7e58df8ef ALSA: usb-audio: WARN_ON when alts is passed as NULL
Prevent NULL dereference in snd_usb_add_endpoints(), when
alts is passed as NULL. In this case, WARN (since this is
a non-fatal bug) and return NULL ep. Call sites treat a NULL
return value as an error.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:27 +02:00
Eldad Zack 88abb8eff4 ALSA: usb-audio: remove implicit_fb from quirk
Since the quirks all apply to implicit feedback (the source endpoint
is always a data endpoint), there's no need to set and check
a flag for it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:14 +02:00
Eldad Zack 914273c714 ALSA: usb-audio: remove is_playback from implicit feedback quirks
An implicit feedback endpoint can only be a capture source. The
consumer (sink) of the implicit feedback endpoint is therefore limited
to playback EPs.
Check if the target endpoint is a playback first and remove redundant
checks.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:48 +02:00
Eldad Zack 95fec88332 ALSA: usb-audio: do not initialize and check implicit_fb
Since implicit_fb is not changed, !implicit_fb will always
be true - it is set only after these checks.
Similarly, there's also no need to set it at the top of the function.

Change the type of implicit_fb to bool (more appropriate).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:11 +02:00
Eldad Zack f34d065013 ALSA: usb-audio: reverse condition logic in set_sync_endpoint
Reverse logic on the conditions required to qualify for a sync endpoint
and remove one level of indendation.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:50:15 +02:00
Eldad Zack a60945fd08 ALSA: usb-audio: move implicit fb quirks to separate function
Separate setting implicit feedback quirks from setting
a sync endpoint (which may also be explicit feedback or async).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:49:21 +02:00
Eldad Zack 71bb64c56d ALSA: usb-audio: separate sync endpoint setting from set_format
Setting the sync endpoint currently takes up about half of set_format().
Move it to a dedicated function.
No functional change.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:34 +02:00
Eldad Zack d133f2c22e ALSA: usb-audio: remove assignment from if condition
Following general kernel style.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:22 +02:00
Eldad Zack d833cdb10c ALSA: usb-audio: remove disabled debug code in set_format
Code block does not compile when enabled.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:12 +02:00
Dan Carpenter 85054b2153 ALSA: usx2y: remove an unneeded check
The test here is always true because S[i].urb is an array not a pointer.
Also it's bogus because the intent was to test:
	if (S->urb[i]) {
instead of:
	if (S[i].urb) {

Anyway, usb_kill_urb() and usb_free_urb() accept NULL pointers so we can
just remove this.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-29 13:59:47 +02:00
Eldad Zack fee4b700a4 ALSA: hiface: return correct XRUN indication
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of
SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer
function of hiface, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

Cc: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-24 10:51:37 +02:00
Eldad Zack be2f93a4c4 ALSA: usb-audio: 6fire: return correct XRUN indication
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of
SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer
function of 6fire, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-21 11:55:22 +02:00
Takashi Iwai 5be1efb4c2 ALSA: usx2y: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 21:25:13 +02:00
Takashi Iwai 9538aa46c2 ALSA: ua101: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 21:24:57 +02:00
Takashi Iwai 5b9ab3f732 ALSA: 6fire: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 18:12:50 +02:00
Eldad Zack 42d4ab832d ALSA: usb-audio: fix regression for fixed stream quirk
Commit 8f898e92ae removed the redundant
reads of bInterfaceProtocol from the descriptors, but introduced a
regression to devices with quirks of type QUIRK_AUDIO_FIXED_ENDPOINT,
since fp->protocol is not set in setup process.

As a consequence, audio streams would not get initialized, as the
following logs show:

[   48.923043] setting usb interface 3:1
[   48.923056] Creating new capture data endpoint #81
[   48.923484] 4:3:1: cannot set freq 48000 to ep 0x81

This patch sets fp->protocol in create_fixed_stream_quirk() and
resolves the regression.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-10 17:52:14 +02:00
Przemek Rudy 066624c6a1 ALSA: usb-audio: Add Audio Advantage Micro II
This patch is adding extensive support (beside standard usb audio class)
for Audio Advantage Micro II usb sound card.
Features included:
- Access to AES bits (so now sending the IEC61937 compliant stream is
possible).
- Mixer SPDIF control added to turn on/off the optical transmitter.

Signed-off-by: Przemek Rudy <prudy1@o2.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-28 13:37:12 +02:00
Takashi Iwai ea70ee057c Merge branch 'full-roland-support' of git://git.alsa-project.org/alsa-kprivate into for-next
For adding support for many Roland and Yamaha devices:
* 'full-roland-support' of git://git.alsa-project.org/alsa-kprivate:
  ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE
  ALSA: usb-audio: claim autodetected PCM interfaces all at once
  ALSA: usb-audio: remove superfluous Roland quirks
  ALSA: usb-audio: add MIDI port names for some Roland devices
  ALSA: usb-audio: add support for many Roland/Yamaha devices
  ALSA: usb-audio: detect implicit feedback on Roland devices
  ALSA: usb-audio: store protocol version in struct audioformat
2013-06-28 12:13:26 +02:00
Clemens Ladisch b7f33917bc ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE
The Roland Quad/Octo-Capture devices use some unknown vendor-specific
mechanism to switch sample rates (and to manage other controls).  To
prevent the driver from attempting to use any other than the default
44.1 kHz sample rate, use quirks to hide the other alternate settings.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:50 +02:00
Clemens Ladisch b1ce7ba619 ALSA: usb-audio: claim autodetected PCM interfaces all at once
snd_card_register() registers all devices newly added since the last
call.  However, the playback/capture streams are handled as one ALSA
device, so the second /dev device will not be registered if the PCM
streams are added in two steps.

QUIRK_AUTODETECT caused the probe callback to be called once for each
interface, which triggered this problem.  Work around this by handling
this like the composite quirk, i.e., autodetecting all other interfaces
that might be used for PCM or MIDI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:49 +02:00
Clemens Ladisch 8e5ced83dd ALSA: usb-audio: remove superfluous Roland quirks
Remove all quirks that are no longer needed now that the generic Roland
quirks can handle the vendor-specific descriptors correctly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:49 +02:00
Clemens Ladisch a968782e27 ALSA: usb-audio: add MIDI port names for some Roland devices
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:48 +02:00
Clemens Ladisch aafe77cc45 ALSA: usb-audio: add support for many Roland/Yamaha devices
Add quirks to detect the various vendor-specific descriptors used by
Roland and Yamaha in most of their recent USB audio and MIDI devices.

Together with the previous patch, this should add audio/MIDI support for
the following USB devices:
- Edirol motion dive .tokyo performance package
- Roland MC-808 Synthesizer
- Roland BK-7m Synthesizer
- Roland VIMA JM-5/8 Synthesizer
- Roland SP-555 Sequencer
- Roland V-Synth GT Synthesizer
- Roland Music Atelier AT-75/100/300/350C/500/800/900/900C Organ
- Edirol V-Mixer M-200i/300/380/400/480/R-1000
- BOSS GT-10B Effects Processor
- Roland Fantom G6/G7/G8 Keyboard
- Cakewalk Sonar V-Studio 20/100/700 Audio Interface
- Roland GW-8 Keyboard
- Roland AX-Synth Keyboard
- Roland JUNO-Di/STAGE/Gi Keyboard
- Roland VB-99 Effects Processor
- Cakewalk UM-2G MIDI Interface
- Roland A-500S Keyboard
- Roland SD-50 Synthesizer
- Roland OCTAPAD SPD-30 Controller
- Roland Lucina AX-09 Synthesizer
- BOSS BR-800 Digital Recorder
- Roland DUO/TRI-CAPTURE (EX) Audio Interface
- BOSS RC-300 Loop Station
- Roland JUPITER-50/80 Keyboard
- Roland R-26 Recorder
- Roland SPD-SX Controller
- BOSS JS-10 Audio Player
- Roland TD-11/15/30 Drum Module
- Roland A-49/88 Keyboard
- Roland INTEGRA-7 Synthesizer
- Roland R-88 Recorder

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:48 +02:00
Clemens Ladisch ba7c2be114 ALSA: usb-audio: detect implicit feedback on Roland devices
All the Roland/Edirol/BOSS USB audio devices that need implicit feedback
show this unambiguously in their descriptors, so it might be a good idea
to let the driver detect this.

This should make playback work correctly (at least with Jack) with the
following devices:
- BOSS GT-100
- BOSS JS-8 Jam Station
- Edirol M-16DX
- Roland GAIA SH-01

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:47 +02:00
Clemens Ladisch 8f898e92ae ALSA: usb-audio: store protocol version in struct audioformat
Instead of reading bInterfaceProtocol from the descriptor whenever it's
needed, store this value in the audioformat structure.  Besides
simplifying some code, this will allow us to correctly handle vendor-
specific devices where the descriptors are marked with other values.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:47 +02:00
Antonio Ospite a91c3fb2f8 Add M2Tech hiFace USB-SPDIF driver
Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.

M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output
Interface, see http://www.m2tech.biz/hiface.html

The supported products are:

  * M2Tech Young
  * M2Tech hiFace
  * M2Tech North Star
  * M2Tech W4S Young
  * M2Tech Corrson
  * M2Tech AUDIA
  * M2Tech SL Audio
  * M2Tech Empirical
  * M2Tech Rockna
  * M2Tech Pathos
  * M2Tech Metronome
  * M2Tech CAD
  * M2Tech Audio Esclusive
  * M2Tech Rotel
  * M2Tech Eeaudio
  * The Chord Company CHORD
  * AVA Group A/S Vitus

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-24 09:26:08 +02:00
Antonio Ospite 0af49ffe3c ALSA: usb: uniform style used in MODULE_SUPPORTED_DEVICE()
In sound/usb/card.c and sound/usb/misc/ua101.c there are no spaces
between the vendor and the device names, use this style in the other
drivers too.

This also helps keeping consistency when new drivers copies from the
ones already in the mainline tree.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:37:08 +02:00
Antonio Ospite 4a9f911861 ALSA: snd-usb-6fire: use vmalloc buffers
For USB devices it's not necessary to allocate physically contiguous
buffers.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:36:41 +02:00
Antonio Ospite fc76f86376 ALSA: snd-usb-caiaq: use vmalloc buffers
For USB devices it's not necessary to allocate physically contiguous
buffers.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:35:52 +02:00
Antonio Ospite 3dd446a7e5 ALSA: snd-usb-caiaq: remove the unused snd_card_used variable
The snd_card_used variable is only read but never written, remove it.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:33:05 +02:00
Dave Jones cd1199edc7 ALSA: sound/usb/misc/ua101.c: convert __list_for_each usage to list_for_each
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-18 07:47:32 +02:00
Dan Carpenter da177dd025 ALSA: usx2y: remove some old dead code
USB_QUEUE_BULK isn't defined any more.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 10:45:42 +02:00
Takashi Iwai 36691e1be6 ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f35, c310 model also requires the
same workaround for avoiding the kernel warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 10:25:02 +02:00
Clemens Ladisch 342cda2934 ALSA: usb-audio: work around Android accessory firmware bug
When the Android firmware enables the audio interfaces in accessory
mode, it always declares in the control interface's baInterfaceNr array
that interfaces 0 and 1 belong to the audio function.  However, the
accessory interface itself, if also enabled, already is at index 0 and
shifts the actual audio interface numbers to 1 and 2, which prevents the
PCM streaming interface from being seen by the host driver.

To get the PCM interface interface to work, detect when the descriptors
point to the (for this driver useless) accessory interface, and redirect
to the correct one.

Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Tested-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 09:56:52 +02:00
Takashi Iwai 11e7064f35 ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270
USB audio driver spews an error message when probing Logitech HD
webcam c270:
  ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
  ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1

Obviously the device needs a fixed volume resolution (cval->res = 384)
like other Logitech devices.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735

Reported-and-tested-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-05 08:35:26 +02:00
Takashi Iwai 8eafc0a161 ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-04 16:07:48 +02:00
Clemens Ladisch a0c6d309c6 ALSA: usb-audio: fix Roland/Cakewalk UM-3G support
Commit 927c9423dd (ALSA: usb-audio: add
Edirol UM-3G support) used a wrong quirk type, which would make the
driver refuse to attach with the error message "MIDIStreaming interface
descriptor not found".

Cc: <stable@vger.kernel.org> # 3.3 and later
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-03 09:42:21 +02:00
Torsten Schenk d47333ddb2 ALSA: usb-6fire: Modify firmware version check
Check only the uppermost 16 bits instead of the whole 32 bits of
the version information. Do this because all firmware version tested
with this version information worked correctly and the strict check
causes problems for several users.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23 14:30:26 +02:00
Torstein Hegge e6135fe960 ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format
freqshift is only set for the data endpoint and syncmaxsize is only set
for the sync endpoint. This results in a syncmaxsize of zero used in the
proc output feedback format calculation, which gives a feedback format
incorrectly shown as 8.16 for UAC2 devices.

As neither the data nor the sync endpoint gives all the relevant
content, output the two combined.

Also remove the sync_endpoint "packet size" which is always zero
and the sync_endpoint "momentary freq" which is constant.

Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async.

Reported-by: B. Zhang <bb.zhang@free.fr>
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-17 08:05:34 +02:00
Eldad Zack 4ca231b2e6 ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
Current code does this:

  be16_to_cpu(buf[i * 2] << 8 | buf[(i * 2) + 1])

Which is effectively (neglecting the index):

  be16_to_cpu(be16_to_cpu(*((u16 *) buf)))

This means the int16 in the buffer is not converted at all.

Daniel Mack confirmed that the driver works on little endian
CPUs, leading to the conclusion that the device-side structure
is actually little endian.
This changes the code to use le16_to_cpu().

Caught by sparse.

Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-30 09:19:02 +02:00
Eldad Zack 74c34ca1cc ALSA: pcm_format_to_bits strong-typed conversion
Add a function to handle conversion from snd_pcm_format_t
to bitwise with proper typing.

Change such conversions to use this function and silence sparse
warnings.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 13:36:15 +02:00
Clemens Ladisch c75c5ab575 ALSA: USB: adjust for changed 3.8 USB API
The recent changes in the USB API ("implement new semantics for
URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the
default, and changed this flag to mean that URBs can be delayed.
This is not the behaviour wanted by any of the audio drivers because
it leads to discontinuous playback with very small period sizes.
Therefore, our URBs need to be submitted without this flag.

Reported-by: Joe Rayhawk <jrayhawk@fairlystable.org>
Cc: <stable@vger.kernel.org> # 3.8 only
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 10:57:35 +02:00