Commit Graph

109 Commits

Author SHA1 Message Date
Shawn Guo 35e2916f70 ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier
Commit 4631960d26da ("ARM: imx6: set initial power mode in pm function")
moves imx6_set_lpm() from clock init function into
imx6_pm_common_init().  This causes a hang when cpuidle support is
enabled.  The reason for that is ARM core clock is shut down
unexpectedly by WAIT mode.  It happens with the following call stack:

    cpuidle_register_governor()
        cpuidle_switch_governor()
            cpuidle_uninstall_idle_handler()
                synchronize_sched()
                    wait_rcu_gp()
                        wait_for_completion()

When wait_for_completion() is called as above, all cores are idle/WFI.
Hence, the reset value of CCM_CLPCR_LPM - WAIT mode, will trigger a
hardware shutdown of the ARM core clock.

To fix the regression, we need to ensure that CCM_CLPCR_LPM is
initialized into RUN mode earlier than cpuidle governor registration,
which is a postcore_initcall.  This patch creates function
imx6_pm_ccm_init() to map CCM block and initialize CCM_CLPCR_LPM into
RUN mode, and have the function called from machine .init_irq hook,
which should be early enough.

Reported-by: Kevin Hilman <khilman@kernel.org>
Fixes: 8fb76a07e2 ("ARM: imx6: set initial power mode in pm function")
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:18 +08:00
Linus Torvalds 8b3c8ba3d8 ARM: SoC late changes for v4.1
We were expecting to sit on this branch through most of the merge window since
 the contents was merged into our tree late, but we ended up sitting on all of
 our contents so it can go in with the rest.
 
 The contents here is:
 
 - A large branch of cleanups of the CM/PRM blocks on OMAP.
 - A couple of patches plumbing up CM/PRM on OMAP5 and DRA7.
 - A branch with DT updates for Freescale i.MX. including some shuffling from
   .dts to .dtsi (include) files that causes a little churn.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNy2KAAoJEIwa5zzehBx3mE4P/A+Wk2ElKl0FH6Kz4Wmt5MOY
 GPbIyd6jXTN/zbyAQxdPEQM7VvBh6GfgGTmNmcmfv2kacGJveAc7+UV0GSfW0XEO
 haOIwSRvfCIW1d2pyphrFlRqzQsDDzJkVuiRo1DkFwICyKEabXNqGu1zjNaLmN3j
 zw1DiAhe9ymywxayT5GBMevKU2a16Jgbzie6UfKKI5YO8Nqug13YI1as7n9SKrU4
 wdi5b7kecgcfVlmYUrN9iqKg3oKTqRNSZDk/WsGvO/L5Mks0Xoc9v/K6rifNUMdd
 CoigEznE1xgDvwPbAeXn4JiF/+JLVnDTZorsINQFIIAzHa2cZM1fMjT3x56IT0Y0
 iIU3uWh8B/L2/qTPsqEBDFd/lBX/E3cND7lCIWCU0vwGWRzAh/Q+vRwdFfLoMOXh
 npcw0hGS4KEWJ0sEX0xU9EvBUa5fb/CXT2xWBPVMV1Wb1QZLcquBRxFFNgh+GK2X
 nmoZFiqfJDQWrMoNySo+MGyBzIYLtwxkRF0rsUvJ47cW2/+KXSHflTgllvEpQ/38
 Ew3QmzCPlFuP7G1xiim9zSGvKIYhWV1fRUix1+FIE+on2d0TmdhqISHzCVU6ePxB
 MZC8GwUww57i0hXXgirgrlN6moKaUC1DN7AwNrHQsJIi8aFXuFWbZAufRrV36Kwg
 zsADWvSeOSWwea04MtkL
 =ssbK
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...
2015-04-22 09:24:55 -07:00
Marc Zyngier 1451756479 ARM: imx6: Warn when an old DT is detected
Now that the GPC has been converted to be a full blown irqchip
(and not a mole on the side of the GIC), booting a new kernel
with an old DT is likely to result in a rough ride for the user.

This patch makes sure such a situation is promptly detected and
the user made aware that a DT update is in order.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:51 +08:00
Marc Zyngier b923ff6af0 ARM: imx6: convert GPC to stacked domains
IMX6 has been (ab)using the gic_arch_extn to provide
wakeup from suspend, and it makes a lot of sense to convert
this code to use stacked domains instead.

This patch does just this, updating the DT files to actually
reflect what the HW provides.

BIG FAT WARNING: because the DTs were so far lying by not
exposing the fact that the GPC block is actually the first
interrupt controller in the chain, kernels with this patch
applied wont have any suspend-resume facility when booted
with old DTs, and old kernels with updated DTs won't even boot.

Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:42:15 +08:00
Shawn Guo a51139fdbc ARM: imx: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:20 -07:00
Sebastian Andrzej Siewior 23bec17275 ARM i.MX6q: unmap memory mapped at imx6q_opp_check_speed_grading()
imx6q_opp_check_speed_grading() remaps memory to the base variable and
never unmaps it. I can't see how this can be of any use later so here I
unmap it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-20 14:26:45 +08:00
Jingchang Lu 08ae964646 ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
System restart mechanism has been changed with the introduction
of "kernel restart handler call chain support". The imx2 watchdog
based restart handler has been moved to the driver, and these
restart can be removed from the machine layer.

This patch cleans up the device tree version machine reset init with
mxc_arch_reset_init_dt and removes corresponding .restart handler,
for the .init_machine that can be handled by system default after
removing the mxc_arch_reset_init_dt, the .init_machine is also removed.

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-22 07:39:36 +08:00
Shawn Guo 8756dd924d ARM: imx: mark .dt_compat as const
Otherwise GCC will mark the .init.rodata section R/W, which causes
a compile error once we add other real R/O data.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:11:33 +08:00
Fabio Estevam a49fb63c87 ARM: mx6: Only check for 1.2GHz for mx6quad
It is only the mx6quad variant that can run up to 1.2GHz, so add the check
accordingly.

This avoids getting the following warning on a mx6solo:

failed to disable 1.2 GHz OPP

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:11:33 +08:00
Philipp Zabel 7ea653efa9 ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05 10:40:48 +08:00
Anson Huang c962a09963 ARM: imx: add speed grading check for i.mx6 soc
The fuse map of speed_grading[1:0] defines the max speed
of ARM, see below the definition:

2b'11: 1200000000Hz;
2b'10: 996000000Hz;
2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
2b'00: 792000000Hz;

Need to remove all illegal setpoints according to fuse
map.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05 10:35:22 +08:00
Shawn Guo 810c0ca879 ARM: imx6q: support ptp and rmii clock from pad
On imx6qdl, the ENET RMII and PTP clock can come from either internal
ANATOP/CCM or external clock source through pad GPIO_16.  But in case
of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared.

The patch adds the support for systems that use an external clock source
and distinguishes above two cases by checking if the PTP clock specified
in device tree is the one coming from the internal ANATOP/CCM.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05 10:35:20 +08:00
Anson Huang df595746fa ARM: imx: add suspend in ocram support for i.mx6q
When system enter suspend, we can set the DDR IO to
high-Z state to save DDR IOs' power consumption, this
operation can save many power(from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6Q SabreSD board, R25) of DDR IOs. To
achieve that, we need to copy the suspend code to ocram
and run the low level hardware related code(set DDR IOs
to high-Z state) in ocram.

If there is no ocram space available, then system will
still do suspend in external DDR, hence no DDR IOs will
be set to high-Z.

The OCRAM usage layout is as below,

ocram suspend region(4K currently):
======================== high address ======================
                              .
                              .
                              .
                              ^
                              ^
                              ^
                      imx6_suspend code
             PM_INFO structure(imx6_cpu_pm_info)
======================== low address =======================

Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05 10:35:10 +08:00
Russell King 5efa906486 Merge branch 'cubox-i-init' into for-linus 2014-01-28 21:38:58 +00:00
Russell King 208d7baf80 ARM: imx: initial SolidRun HummingBoard support
Add support for the SolidRun HummingBoard.  This commit adds support for
the following interfaces on this board:

- Consumer Ir receiver
- S/PDIF output
- Both USB interfaces
- Gigabit Ethernet using AR8035
- UART port

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-27 14:18:09 +00:00
Shawn Guo df79bc9c27 ARM: imx: use __initconst for const init definition
0-DAY kernel build testing backend reports the following.

 scripts/checkpatch.pl 0001-ARM-imx-add-support-code-for-IMX50-based-machines.patch
 # many are suggestions rather than must-fix

 ERROR: Use of const init definition must use __initconst
 #80: arch/arm/mach-imx/mach-imx50.c:26:
 +static const char *imx50_dt_board_compat[] __initdata = {

While at it, fix the error globally for IMX platform.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-31 09:36:33 +08:00
Tim Harvey 4bb1d09fe4 ARM: imx: add PCI fixup for PEX860X on Gateworks board
The PEX860X has GPIO's which are used for PCI Reset lines on the
Gateworks Ventana boards.  The GPIO's need to be set as output
level high so as to allow the PCIe devices to come out of reset.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-09 13:18:16 +08:00
Linus Torvalds f9300eaaac ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
    Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
 
  - Addition of the in-kernel switching feature to the arm_big_little
    cpufreq driver from Viresh Kumar and Nicolas Pitre.
 
  - cpufreq support for iMac G5 from Aaro Koskinen.
 
  - Baytrail processors support for intel_pstate from Dirk Brandewie.
 
  - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
 
  - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
 
  - ACPI power management support for the I2C and SPI bus types from
    Mika Westerberg and Lv Zheng.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
    Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
 
  - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
    Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
    Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
 
  - intel_pstate updates from Dirk Brandewie and Adrian Huang.
 
  - ACPICA update to version 20130927 includig fixes and cleanups and
    some reduction of divergences between the ACPICA code in the kernel
    and ACPICA upstream in order to improve the automatic ACPICA patch
    generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki,
    Naresh Bhat, Bjorn Helgaas, David E Box.
 
  - ACPI IPMI driver fixes and cleanups from Lv Zheng.
 
  - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
    Zhang Yanfei, Rafael J Wysocki.
 
  - Conversion of the ACPI AC driver to the platform bus type and
    multiple driver fixes and cleanups related to ACPI from Zhang Rui.
 
  - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
    Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
 
  - Fixes and cleanups and new blacklist entries related to the ACPI
    video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
    Kirill Tkhai.
 
  - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
 
  - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
    Bartlomiej Zolnierkiewicz, Prarit Bhargava.
 
  - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
 
  - Operation Performance Points (OPP) core updates from Nishanth Menon.
 
  - Runtime power management core fix from Rafael J Wysocki and update
    from Ulf Hansson.
 
  - Hibernation fixes from Aaron Lu and Rafael J Wysocki.
 
  - Device suspend/resume lockup detection mechanism from Benoit Goby.
 
  - Removal of unused proc directories created for various ACPI drivers
    from Lan Tianyu.
 
  - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
    handler from Heikki Krogerus and Jarkko Nikula.
 
  - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
 
  - Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
    Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
    Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
    Liu Chuansheng.
 
  - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
    Jean-Christophe Plagniol-Villard.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSfPKLAAoJEILEb/54YlRxH6YQAJwDKi25RCZziFSIenXuqzC/
 c6JxoH/tSnDHJHhcTgqh7H7Raa+zmatMDf0m2oEv2Wjfx4Lt4BQK4iefhe/zY4lX
 yJ8uXDg+U8DYhDX2XwbwnFpd1M1k/A+s2gIHDTHHGnE0kDngXdd8RAFFktBmooTZ
 l5LBQvOrTlgX/ZfqI/MNmQ6lfY6kbCABGSHV1tUUsDA6Kkvk/LAUTOMSmptv1q22
 hcs6k55vR34qADPkUX5GghjmcYJv+gNtvbDEJUjcmCwVoPWouF415m7R5lJ8w3/M
 49Q8Tbu5HELWLwca64OorS8qh/P7sgUOf1BX5IDzHnJT+TGeDfvcYbMv2Z275/WZ
 /bqhuLuKBpsHQ2wvEeT+lYV3FlifKeTf1FBxER3ApjzI3GfpmVVQ+dpEu8e9hcTh
 ZTPGzziGtoIsHQ0unxb+zQOyt1PmIk+cU4IsKazs5U20zsVDMcKzPrb19Od49vMX
 gCHvRzNyOTqKWpE83Ss4NGOVPAG02AXiXi/BpuYBHKDy6fTH/liKiCw5xlCDEtmt
 lQrEbupKpc/dhCLo5ws6w7MZzjWJs2eSEQcNR4DlR++pxIpYOOeoPTXXrghgZt2X
 mmxZI2qsJ7GAvPzII8OBeF3CRO3fabZ6Nez+M+oEZjGe05ZtpB3ccw410HwieqBn
 dYpJFt/BHK189odhV9CM
 =JCxk
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c
2013-11-14 13:41:48 +09:00
Nishanth Menon e4db1c7439 PM / OPP: rename header to linux/pm_opp.h
Since Operating Performance Points (OPP) functions are specific
to device specific power management, be specific and rename opp.h
to pm_opp.h

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00
Nishanth Menon 5d4879cda6 PM / OPP: rename functions to dev_pm_opp*
Since Operating Performance Points (OPP) functions are specific to
device specific power management, be specific and rename opp_*
accessors in OPP library with dev_pm_opp_* equivalent.

Affected functions are:
 opp_get_voltage
 opp_get_freq
 opp_get_opp_count
 opp_find_freq_exact
 opp_find_freq_floor
 opp_find_freq_ceil
 opp_add
 opp_enable
 opp_disable
 opp_get_notifier
 opp_init_cpufreq_table
 opp_free_cpufreq_table

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00
Shawn Guo 87a84b6982 ARM: imx: replace imx6q_restart() with mxc_restart()
The imx6q_restart() works fine with normal reboot but will run into
problem with emergency reboot like sysrq-b.  In that case, of_iomap()
gets called from interrupt context and hence triggers the BUG_ON in
__get_vm_area_node().

Actually, since commit c1e31d1 (ARM: imx: create
mxc_arch_reset_init_dt() for DT boot), imx6q/dl should try to use
mxc_restart() by calling mxc_arch_reset_init_dt() beforehand, where
things like of_iomap() can be done.

The patch updates mxc_restart() a little bit to get it work for imx6q/dl
and kill imx6q_restart() completely.

Reported-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21 09:36:53 +08:00
Shawn Guo a28875462b ARM: imx6: report soc info via soc device
The patch enables soc bus infrastructure and adds a function
imx_soc_device_init() to report soc info via soc device interface for
imx6qdl and imx6sl.  With the support, user space can get soc related
info by looking at sysfs like below.

  $ cat /sys/devices/soc0/machine
  Freescale i.MX6 Quad SABRE Smart Device Board
  $ cat /sys/devices/soc0/family
  Freescale i.MX
  $ cat /sys/devices/soc0/soc_id
  i.MX6Q
  $ cat /sys/devices/soc0/revision
  1.2

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21 09:14:54 +08:00
Shawn Guo f1c6f31472 ARM: imx: add a common function to initialize revision from anatop
The patch creates a common function imx_init_revision_from_anatop() by
merging imx6q_init_revision() and imx_anatop_get_digprog(), so that any
SoC that encodes revision info in anatop can use it to initialize
revision.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21 09:13:12 +08:00
Shawn Guo 3f75978b37 ARM: imx6q: use common soc revision helpers
It calls imx_set_soc_revision() to set up soc revision in
imx6q_init_revision(), and replaces all the occurrences of
imx6q_revision() with common helper imx_get_soc_revision().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21 09:12:51 +08:00
Shawn Guo 6886530bab Merge remote-tracking branch 'shesselba/clk-of-init-v2_for-3.13' into imx/soc 2013-10-21 09:10:56 +08:00
Sebastian Hesselbarth 4d9d18a560 ARM: imx: remove custom .init_time hook
With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-29 21:09:30 +02:00
Sudeep KarkadaNagesha b494b48dac cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device
Commit cdc58d602d "cpufreq: imx6q-cpufreq:
remove device tree parsing for cpu nodes" assumed the pdev->dev is set to
cpu0 device in the platform code. But it actually points to the virtual
cpufreq-cpu0 platform device which is not present in the device tree.
Most of the information needed by cpufreq is stored in cpu0 DT node.
So cpu_dev must point to cpu0 device.

This patch fixes the wrong assignment to cpu_dev.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-19 03:53:43 +02:00
Linus Torvalds b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Shawn Guo a94f8ecb2f ARM: imx6q: remove board specific CLKO setup
The CLKO is widely used by imx6q board designs to clock audio codec.
Since most codecs accept 24 MHz frequency, let's initially set up CLKO
with OSC24M (cko <-- cko2 <-- osc).  Then those board specific CLKO
setup for audio codec can be removed.

The board dts files also need an update on cko reference in codec node.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:34 +08:00
Dinh Nguyen dc76a1adfa phy: micrel: Add definitions for common Micrel PHY registers
Add defines for common Micrel PHY setups so that other platforms
can use them. Update imx61 and sama5 hardware to use the micrel_phy.h
PHY defines.

Also add support for the KSZ9021RLRN PHY.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: David S. Miller <davem@davemloft.net>
CC: Andrew Victor <linux@maxim.org.za>
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:54 +08:00
Peter Chen ddcb9aa65a ARM: imx: Move anatop related from board file to anatop driver
Move anatop related (For USB) from board file to anatop driver

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:51 +08:00
Sudeep KarkadaNagesha cdc58d602d cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes
Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-08-21 10:29:53 +01:00
Shawn Guo e6a0756961 ARM: imx: let L2 initialization be a common function
Move imx6q L2 initialization function imx6q_init_l2cache() into
system.c, and rename it imx_init_l2cache(), so that other platforms
other than imx6q can also use the function.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2013-08-16 13:11:22 +08:00
Philipp Zabel 6d6fc5012a ARM i.MX6Q: Use ENET_CLK_SEL defines in imx6q_1588_init
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:21 +08:00
Sascha Hauer dbf6719a4a ARM: i.MX6: add ethernet phy fixup for KSZ9031
The KSZ9031 is used on the i.MX6 based Data Modul eDM-QMX6
board. It needs the same fixup to the rx/tx delays as other
i.MX6 boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:20 +08:00
Sascha Hauer 12da484485 ARM: i.MX6: add ethernet phy fixup for AR8031
The AR8031 is used on the i.MX6 based sabreSD, sabreauto and wandboard.
All need the same fixup, so add it for all i.MX6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:19 +08:00
Sascha Hauer 14078291d8 ARM: i.MX6: call ksz9021 phy fixup for all i.MX6 boards
In current U-Boot the sabrelite, nitrogen6x and titanium all need
the same fixup for the ksz9021 phy. Instead of limiting the fixup
to a single board apply them for all.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:19 +08:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Nicolin Chen e7eccc7e16 ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
WM8962 needs 24MHz clock for its MCLK, so choose PLL4 as the parent of clko1.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:45:16 +08:00
Shawn Guo 53bb71da1c ARM: imx6: use common of_clk_init() call to initialize clocks
Instead of explicitly calling clock initialization functions, we can
declare the functions with CLK_OF_DECLARE() and then call common
of_clk_init() to have them invoked properly.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:45:14 +08:00
Dirk Behme b3a9c31537 ARM: i.MX6: add i.MX6 specific L2 cache configuration
To improve the performance and power consumption add an i.MX6
specific L2 cache initialization.

This configuration is taken from Freescale's kernel patch

"ENGR00153601 [MX6]Adjust L2 cache parameter" [1]

with two additional improvements:

a) The L2X0_POWER_CTRL has only the two bits we set. So no need
   to read the register before. Remove the register read done
   in Freescale's patch.

b) In the L2X0_PREFETCH_CTRL register, besides the double linefill (bit[30]),
   additionally enable the instruction and data prefetch (bit[29-28]).

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

[1] http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_12.09.01&id=814656410b40c67a10b25300e51b0477b2bb96d1
2013-06-17 15:45:09 +08:00
Linus Torvalds fcba914542 ARM: arm-soc platform updates for 3.10, part 3
This is the third and smallest of the SoC specific updates.
 Changes include:
 
 * SMP support for the Xilinx zynq platform
 * Smaller imx changes
 * LPAE support for mvebu
 * Moving the orion5x, kirkwood, dove and mvebu platforms
   to a common "mbus" driver for their internal devices.
 
 It would be good to get feedback on the location of the "mbus"
 driver. Since this is used on multiple platforms may potentially
 get shared with other architectures (powerpc and arm64), it
 was moved to drivers/bus/. We expect other similar drivers to
 get moved to the same place in order to avoid creating more
 top-level directories under drivers/ or cluttering up the
 messy drivers/misc/ even more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgifmCrR//JCVInAQLZ6A//VD38ocUx9RPC8rOgrkzQxcMTh3wFghoA
 BVvS8fcAmhZYA5+GpTYBm+5XH2Jvu6Pv0hrba8TOeEhyZJxiWA6vg0cWWmnvZLDC
 Q0uubhqIhv32I2Oq4uJb/VyzcCrQFrnjhw9HHphy7YlGKKBUFWrbgTaOypwbgXr9
 DnB7u04DvaKcUjZb4Y0HaUDM7qWMFDPbKKF5WMZPqjocnjsiBQ2JMw+2KByliWR3
 mCI+FdickpDYSVp9V9iRM6F73cItknjZIzQs1RYg/GSuPSWkWTdfzE1Blk/561Fo
 QDrNDhnXHlt+bmQRKGWel2gDWBZW47Wj+XkjGpWDFh+e/l3vNJq0hrzXizuRCLSw
 /2VefXyd3jNj8UWL3+GCA4dnw8fx14dgfNJ2iu7kg6l4ggwpJ05ToxabkLFlTRwy
 LloDFjswiTBi75YdQRQCV/95NIxvIQIkbytPrk5zQWVwg8ZXoicgzRRUL5gifLh+
 WE+zaY/A5e1fXN/XS70hvbp2ROZtfGOdunUR9XFR8KNqDoJDlqtrlV3Pjh75YY8G
 JUmCKQjzfubr5WHskPBGCtsSb1455MEIFVANEtlJyOEKp6ytXfpVvrrZtAvmD6Ep
 07dOqOgflnuZPk7H0JOf7mTf9L+fmNp4ubjRqcs9ZfPsEGoQFqBtpLF6JQbxUYGd
 j69lW3jEM3o=
 =rQsu
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
 "This is the third and smallest of the SoC specific updates.  Changes
  include:

   - SMP support for the Xilinx zynq platform
   - Smaller imx changes
   - LPAE support for mvebu
   - Moving the orion5x, kirkwood, dove and mvebu platforms to a common
     "mbus" driver for their internal devices.

  It would be good to get feedback on the location of the "mbus" driver.
  Since this is used on multiple platforms may potentially get shared
  with other architectures (powerpc and arm64), it was moved to
  drivers/bus/.  We expect other similar drivers to get moved to the
  same place in order to avoid creating more top-level directories under
  drivers/ or cluttering up the messy drivers/misc/ even more."

* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: imx: reset_controller may be disabled
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ...
2013-05-07 11:02:18 -07:00
Linus Torvalds a7726350e0 ARM: arm-soc cleanup for 3.10
Here is a collection of cleanup patches. Among the pieces that stand out are:
 
 - The deletion of h720x platforms
 - Split of at91 non-dt platforms to their own Kconfig file to keep them separate
 - General cleanups and refactoring of i.MX and MXS platforms
 - Some restructuring of clock tables for OMAP
 - Convertion of PMC driver for Tegra to dt-only
 - Some renames of sunxi -> sun4i (Allwinner A10)
 - ... plus a bunch of other stuff that I haven't mentioned
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggUqAAoJEIwa5zzehBx3HjEQAJwp7heRs/HwTDzmzcyHkRMV
 usbaa9dHBuAZ0DzsWjLK99xEn8VWD9TvbeP6hN5gNhxko06UVza3o8PI2iV1ztMB
 9K3u2+LS5on/5cOxnsU1va16h5hBZ0ZIgNx5NY+PZ5mBY6v1U3qTjljPP62iXp63
 w+sdXeZDe/c5JvuoDRbY0OBR++3Jp8cQg7KbU78jWz3r5D2rC1zwhkf2audcRY6b
 jIWTj9M8CHynh/D6OzKqDcOYorBHNSRj0YbiWS2nnMfm+0V8nya00EPRpCPRiBUb
 sobSy1CI9Qxiih3bOf6QCfzCRzJ5hbtE0zlI8g3bqtEZ1yOsE949HrKapWHJJdIU
 JNTXrxXORAnaRhbzvSPNpp/iJBSDQRsfEETgv5BuHg/4lzTQfzElySbcgb4EeoHr
 7Zt8ZR2/Du+u76qIPqs19ES3Wx+nOEOfSDAgZmlfPvlwmlGDYvqAXoeJ006VXnhG
 JacLuD/cFnJ1w00Bcl48ZXMIsVkoRqjvsCG5q688HGXMM1lU8DfgUpQY6OCWAbdu
 kFnBinJZk+HbE8FGS8O0BoQ+oiC0YIr2XhATL66PGHq7bLHb5ycwvZ7mrfC0AN9j
 M9hqTFednwfo9wF8vSj5nMsxXwP8/mky4ECGoFvLsMYDosunrNVnAHtTgDSE+ZgO
 6kQJ1P8jBBXn2LyjF88W
 =xCAx
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup from Olof Johansson:
 "Here is a collection of cleanup patches.  Among the pieces that stand
  out are:

   - The deletion of h720x platforms
   - Split of at91 non-dt platforms to their own Kconfig file to keep
     them separate
   - General cleanups and refactoring of i.MX and MXS platforms
   - Some restructuring of clock tables for OMAP
   - Convertion of PMC driver for Tegra to dt-only
   - Some renames of sunxi -> sun4i (Allwinner A10)
   - ... plus a bunch of other stuff that I haven't mentioned"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: sunxi: Rework the restart code
  irqchip: sunxi: Rename sunxi to sun4i
  irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
  clocksource: sunxi: Rename sunxi to sun4i
  clocksource: sunxi: make use of CLKSRC_OF
  clocksource: sunxi: Cleanup the timer code
  ARM: at91: remove trailing semicolon from macros
  ARM: at91/setup: fix trivial typos
  ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
  ARM: EXYNOS: change the name of USB ohci header
  ARM: SAMSUNG: Remove unnecessary code for dma
  ARM: S3C24XX: Remove unused GPIO drive strength register definitions
  ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
  ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
  ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
  ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
  ...
2013-05-02 09:03:55 -07:00
Olof Johansson 567b1b0839 The imx soc changes for 3.10:
* Enable anatop, well bisa and RBC for suspend to optimize the power
   consumption a little bit
 * Clock changes for TVE, LDB, PATA, SRTC support
 * Add System Reset Controller (SRC) support for imx5 and imx6
 * Add initial imx6dl support based on imx6q code
 * Kconfig for cpufreq-cpu0, defconfig updates and few other changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZ/viAAoJEFBXWFqHsHzOyqUH/2t7CCwlfTVUJYDCeo6PaE9x
 41cV5zG6RvX1OfkRUmJ2N2klGn4zhwg6GHsCDQmvs+IODs4E7JeB9M92FAaPng71
 NnuuwCQ01iIoaTtkz8z/n3tSet3fYB+xfNCMJoWIyS0edFFkCjOgnqRsA0pHRIOp
 G6ey1kU80D0f4+DjAUg1mkIvJrZxbRKDwmwqfDGJzQ4VU7cv70n027YuMKbeMyCC
 zdeKmpKSEl9AY+O/zeMrf03zEW+kdZ4eB6cTUFlpzYwPYY9o+XHx0U0535F7/x4+
 KObUZ9Qg7liP5WO3ZzkVff5HJqPs6s/q99eOsU4/okF1x0fpq2mSgIHlSw4HpK8=
 =TuTx
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2

From Shawn Guo:
The imx soc changes for 3.10:

* Enable anatop, well bisa and RBC for suspend to optimize the power
  consumption a little bit
* Clock changes for TVE, LDB, PATA, SRTC support
* Add System Reset Controller (SRC) support for imx5 and imx6
* Add initial imx6dl support based on imx6q code
* Kconfig for cpufreq-cpu0, defconfig updates and few other changes

* tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (275 commits)
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ARM: i.MX53 Add the cko1, cko2 clock outputs.
  staging: drm/imx: Use SRC to reset IPU
  ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
  ARM: imx: do not use regmap_read for ANADIG_DIGPROG
  ARM i.MX6q: set the LDB serial clock parent to the video PLL
  ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
  ARM i.MX6q: fix ldb di divider and selector clocks
  ARM i.MX53: fix ldb di divider and selector clocks
  ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Trivial change/change conflict in arch/arm/mach-imx/mach-imx6q.c resolved.
2013-04-12 23:55:05 -07:00
Shawn Guo 3c03a2fed6 ARM: imx: add initial imx6dl support
The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly
compatible with i.MX6 Quad/Dual.  And that's why we choose to support
it using imx6q code with cpu_is_imx6dl() check when necessary.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:28:15 +08:00
Shawn Guo 7006ba24c2 ARM: imx: do not use regmap_read for ANADIG_DIGPROG
Function imx_anatop_get_digprog() that reads register ANADIG_DIGPROG is
called to identify silicon version.  Users might query silicon version
earlier than regmap subsystem is ready.  For example, imx6q clock driver
query revision in mx6q_clocks_init(), where regmap is not initialized
yet.

Change imx_anatop_get_digprog() to map anatop block and read
ANADIG_DIGPROG in the native way, so that the function can work at very
early stage.

While at it, let's move imx_print_silicon_rev() back to
imx6q_timer_init() to have the message show up a little earlier.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:28:13 +08:00
Philipp Zabel b1a3582dc6 ARM i.MX6q: export imx6q_revision
So it can be used in clk-imx6q.c for revision dependent clock tree setup.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:01:44 +08:00
Anson Huang e95dddb34c ARM: imx: enable anatop suspend/resume
Anatop module have sereval configurations for user
to reduce the power consumption in suspend, provide
suspend/resume interface for further use and enable
fet_odrive to reduce CORE LDO leakage during suspend.

As we have a common anatop file, remove all the operations
of anatop module in other files, use anatop interfaces to
do that.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:01:42 +08:00
Fabio Estevam f8c11b2b36 ARM: mach-imx: mach-imx6q: Fix sparse warnings
Fix the following sparse warnings:

arch/arm/mach-imx/mach-imx6q.c:60:6: warning: symbol 'imx6q_restart' was not declared. Should it be static?
arch/arm/mach-imx/mach-imx6q.c:223:24: warning: symbol 'imx6q_cpufreq_pdev' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 16:17:52 +08:00
Rob Herring da4a686a2c ARM: smp_twd: convert to use CLKSRC_OF init
Now that we have OF based init with CLKSRC_OF, convert smp_twd init
function to use it and covert all callers of
twd_local_timer_of_register.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-omap@vger.kernel.org
Cc: spear-devel@list.st.com
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-11 08:42:08 -05:00