Commit Graph

608 Commits

Author SHA1 Message Date
Dave Airlie a682169891 imx-drm: cleanups and YUV 4:2:0 memory read/write reduction support
- Remove counter load enable form PRE, which has no effect.
 - Add support for setting the double read/write reduction flag in channel
   parameter memory. This can be used to save some memory bandwidth when
   capturing in YUV 4:2:0 chroma subsampled formats.
 - Allocate DMA channel structures as needed, most of the 64 channels are
   unused or even reserved.
 - Remove unused interrupt busy waiting routine.
 - Set VDIC field order for both AUTO and MAN inputs simultaneously as
   both can't be active at the same time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlk49zAXHHAuemFiZWxA
 cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOtX+g/+M5DPkGhcP8fN9m47MOAEa+nP
 oDciYC76VrQev/Qys/zLM3/6sWF9h82USJ52H+zw41RuKKkYlcOzVWnSPQd2yN6Y
 hIl0fCsFzGxOMnIAhmi6BHFnvJKP1jsfeBdXSHyxI0y5kGoufG7BEHiJ7TTSgy/I
 JhccDKTRV9NzAfwpD37EI3a/Nc53DRpw3jrnHPnAaBJ6hYVPZ9YCSrBYbQQbIrDr
 x6NB8E1Ga3KRGZMTw45bTBiOs4AbZKSunzrqWQFnTRjbE+aTDs9W5n5wcdr7AoWi
 gqnx+b6TkiarNK3taHffjYioYvvn2nbGhuoAtg7hpS0CeUup0gitQquKM0kqsWnk
 yBykkP+Z7udASRgXdK6Gtzo6hzdhPeFPmmMbKmSBdIvT26t0ikf9RN1UlEhE6nY3
 A68jKC4+gNTu8kF6imzWCfwM9KB4pWn0N0qTY5U9Y7/gWFky6IEDn3V5OM3XXqUa
 c/iglYyzO+B7vVu6ZajlH+shemO1mVaxGjVFrfX29syVooZrmo0NVJPdoKwiYx0r
 E08FCOdUIEhzFS6h1/FII+mZ6YzAmNkXVz+l+MWaoOW2tIWWX4xSsFTKBka2hDfq
 daU3CDcKcg8LuSybHg6lzj8Hw+/CWkqgtv6ESVnvHEUYCHoZsvArJTNoQrx/zJbE
 EwgZIM4daufEuv6I5zo=
 =m3BY
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2017-06-08' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm: cleanups and YUV 4:2:0 memory read/write reduction support

- Remove counter load enable form PRE, which has no effect.
- Add support for setting the double read/write reduction flag in channel
  parameter memory. This can be used to save some memory bandwidth when
  capturing in YUV 4:2:0 chroma subsampled formats.
- Allocate DMA channel structures as needed, most of the 64 channels are
  unused or even reserved.
- Remove unused interrupt busy waiting routine.
- Set VDIC field order for both AUTO and MAN inputs simultaneously as
  both can't be active at the same time.

* tag 'imx-drm-next-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: vdic: include AUTO field order bit in ipu_vdi_set_field_order
  gpu: ipu-v3: remove interrupt busy waiting routine
  gpu: ipu-v3: allocate ipuv3_channels as needed
  gpu: ipu-v3: Add support for double read/write reduction
  gpu: ipu-v3: prg: remove counter load enable
2017-06-16 10:05:38 +10:00
Philipp Zabel e1e9733cd3 gpu: ipu-v3: Add support for double read/write reduction
Allow to skip writing odd chroma rows by setting the RDRW bit for
4:2:0 chroma subsampled formats for any IDMAC write channel. This
also allows to skip reading odd rows for the VDIC read channel.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-08 08:57:18 +02:00
Andrzej Hajda b2adc53075 drm/exynos/decon5433: simplify shadow protect code
There is no point in protecting only particular windows during update.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01 16:21:36 +09:00
Nicolas Dichtel fcc8487d47 uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-11 00:21:54 +09:00
Linus Torvalds 2f34c1231b main drm pull request for 4.12 kernel
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZCTzvAAoJEAx081l5xIa+9kcQAJsQiija4/7QGx6IzakOMqjx
 WulJ3zYG/cU/HLwCBcuWRDF6wAj+7iWNeLCPmolHwEazcI8tQVdgMlWtbdMbDh8U
 ckzD3FBXsEVfIfab+u6tyoUkm3l/VDhMXbjkUK7NTo/+dkRqe5LuFfZPCGN09jft
 Y+5salkRXzDhXPSFsqmjfzhx1v7PTgf0a5HUenKWEWOv+sJQaW4/iPvcDSIcg5qR
 l9WjAqro1NpFYhUodnh6DkLeledL1U5whdtp/yvrUAck8y+WP/jwGYmQ7pZ0UkQm
 f0M3kV6K67ox9eqN++jsGX5o8sB1qF01Uh95kBAnyzYzsw4ZlMCx6pV7PDX+J88M
 UBNMEqX10hrLkNJA9lGjPWx+/6fudcwg9anKvTRO3Uyx7MbYoJAgjzAM+yBqqtV0
 8Otxa4Bw0V2pmUD+0lqJDERRvE77VCXkLb8SaI5lQo0MHpQqT2cZA+GD+B+rZHO6
 Ie5LDFY87vM2GG1IECufG+xOa3v6sn2FfQ1ouu1KNGKOAMBKcQCQyQx3kGVuNW2i
 HDACVXALJgXdRlVLm4jydOCZdRoguX7AWmRjtdwxgaO+lBcGfLhkXdjLQ7Ho+29p
 32ArJfkZPfA53vMB6lHxAfbtrs1q2RzyVnPHj/KqeJnGZbABKTsF2HQ5BQc4Xq/J
 mqXoz6Oubdvk4Pwyx7Ne
 =UxFF
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux

Pull drm u pdates from Dave Airlie:
 "This is the main drm pull request for v4.12. Apart from two fixes
  pulls, everything should have been in drm-next for at least 2 weeks.

  The biggest thing in here is AMD released the public headers for their
  upcoming VEGA GPUs. These as always are quite a sizeable chunk of
  header files. They've also added initial non-display support for those
  GPUs, though they aren't available in production yet.

  Otherwise it's pretty much normal.

  New bridge drivers:
   - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
   - generic LVDS bridge support.

  Core:
   - Displayport link train failure reporting to userspace
   - debugfs interface cleaned up
   - subsystem TODO in kerneldoc now
   - Extended fbdev support (flipping and vblank wait)
   - drm_platform removed
   - EDP CRC support in helper
   - HF-VSDB SCDC support in EDID parser
   - Lots of code cleanups and header extraction
   - Thunderbolt external GPU awareness
   - Atomic helper improvements
   - Documentation improvements

  panel:
   - Sitronix and Samsung new panel support

  amdgpu:
   - Preliminary vega10 support
   - Multi-level page table support
   - GPU sensor support for userspace
   - PRT support for sparse buffers
   - SR-IOV improvements
   - Non-contig VRAM CPU mapping

  i915:
   - Atomic modesetting enabled by default on Gen5+
   - LSPCON improvements
   - Atomic state handling for cdclk
   - GPU reset improvements
   - In-kernel unit tests
   - Geminilake improvements and color manager support
   - Designware i2c fixes
   - vblank evasion improvements
   - Hotplug safe connector iterators
   - GVT scheduler QoS support
   - GVT Kabylake support

  nouveau:
   - Acceleration support for Pascal (GP10x).
   - Rearchitecture of code handling proprietary signed firmware
   - Fix GTX 970 with odd MMU configuration
   - GP10B support
   - GP107 acceleration support

  vmwgfx:
   - Atomic modesetting support for vmwgfx

  omapdrm:
   - Support for render nodes
   - Refactor omapdss code
   - Fix some probe ordering issues
   - Fix too dark RGB565 rendering

  sunxi:
   - prelim rework for multiple pipes.

  mali-dp:
   - Color management support
   - Plane scaling
   - Power management improvements

  imx-drm:
   - Prefetch Resolve Engine/Gasket on i.MX6QP
   - Deferred plane disabling
   - Separate alpha support

  mediatek:
   - Mediatek SoC MT2701 support

  rcar-du:
   - Gen3 HDMI support

  msm:
   - 4k support for newer chips
   - OPP bindings for gpu
   - prep work for per-process pagetables

  vc4:
   - HDMI audio support
   - fixes

  qxl:
   - minor fixes.

  dw-hdmi:
   - PHY improvements
   - CSC fixes
   - Amlogic GX SoC support"

* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
  drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
  drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
  drm/nouveau/kms: Increase max retries in scanout position queries.
  drm/nouveau/bios/bitP: check that table is long enough for optional pointers
  drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
  drm: mali-dp: use div_u64 for expensive 64-bit divisions
  drm/i915: Confirm the request is still active before adding it to the await
  drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
  drm/i915/selftests: Allocate inode/file dynamically
  drm/i915: Fix system hang with EI UP masked on Haswell
  drm/i915: checking for NULL instead of IS_ERR() in mock selftests
  drm/i915: Perform link quality check unconditionally during long pulse
  drm/i915: Fix use after free in lpe_audio_platdev_destroy()
  drm/i915: Use the right mapping_gfp_mask for final shmem allocation
  drm/i915: Make legacy cursor updates more unsynced
  drm/i915: Apply a cond_resched() to the saturated signaler
  drm/i915: Park the signaler before sleeping
  drm: mali-dp: Check the mclk rate and allow up/down scaling
  drm: mali-dp: Enable image enhancement when scaling
  drm: mali-dp: Add plane upscaling support
  ...
2017-05-03 11:44:24 -07:00
Linus Torvalds 5a0387a8a8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.12:

  API:
   - Add batch registration for acomp/scomp
   - Change acomp testing to non-unique compressed result
   - Extend algorithm name limit to 128 bytes
   - Require setkey before accept(2) in algif_aead

  Algorithms:
   - Add support for deflate rfc1950 (zlib)

  Drivers:
   - Add accelerated crct10dif for powerpc
   - Add crc32 in stm32
   - Add sha384/sha512 in ccp
   - Add 3des/gcm(aes) for v5 devices in ccp
   - Add Queue Interface (QI) backend support in caam
   - Add new Exynos RNG driver
   - Add ThunderX ZIP driver
   - Add driver for hardware random generator on MT7623 SoC"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
  crypto: stm32 - Fix OF module alias information
  crypto: algif_aead - Require setkey before accept(2)
  crypto: scomp - add support for deflate rfc1950 (zlib)
  crypto: scomp - allow registration of multiple scomps
  crypto: ccp - Change ISR handler method for a v5 CCP
  crypto: ccp - Change ISR handler method for a v3 CCP
  crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
  crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
  Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
  crypto: ccp - Disable interrupts early on unload
  crypto: ccp - Use only the relevant interrupt bits
  hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  crypto: crct10dif-vpmsum - Fix missing preempt_disable()
  crypto: testmgr - replace compression known answer test
  crypto: acomp - allow registration of multiple acomps
  hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
  crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
  padata: get_next is never NULL
  crypto: exynos - Add new Exynos RNG driver
  ...
2017-05-02 15:53:46 -07:00
Krzysztof Kozlowski ed067d4a85 linux/kernel.h: Add ALIGN_DOWN macro
Few parts of kernel define their own macro for aligning down so provide
a common define for this, with the same usage and assumptions as existing
ALIGN.

Convert also three existing implementations to this one.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-21 20:30:44 +08:00
Dave Airlie e5c1ff1475 Linux 4.11-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJY2C9qAAoJEHm+PkMAQRiGaBQIAIGzdlZ6ImiP6zoukrRv7qUr
 44ITm0lsBiL85QGedhQQL+Y9UqwUmlqgFqnH0Gr8YHNbLJWXzdjGbl5aVo4KjASq
 104NLUDXtPww/xZdH4wJMzhuwucYwZOUyDOjOr0ak3cGxOE2xjNjHMZXxWUf20GO
 EpRr6WhV1DUAvAdjdNa9KlcOjMluNpMLLyL1CFLjrkkArrWAyqOURKHAb6ZLghfv
 iZV1qJTVPyYGpnlI3kuEgu2GuDjxqpoNLSr3wHyEHm/pBPEl7MX6zPbzcegBV8TY
 cRRlXo4notdsuknmSNcj0hHuTQvw1kl7BhieLKVsnCyCIM6jjX4TSQZFutmbzwM=
 =5iRl
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.11-rc4' into drm-next

Linux 4.11-rc4

The i915 GVT team need the rc4 code to base some more code on.
2017-03-28 17:34:19 +10:00
Andrzej Hajda f3cce673e1 drm/exynos/decon5433: signal frame done interrupt at front porch
DECON in case of video mode generates interrupt by default at start
of vertical back porch. As this interrupt is used to generate VBLANK
events more optimal point is start of vertical front porch.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21 13:17:22 +09:00
Andrzej Hajda 73488331eb drm/exynos/decon5433: fix vblank event handling
Current implementation of event handling assumes that vblank interrupt is
always called at the right time. It is not true, it can be delayed due to
various reasons. As a result different races can happen. The patch fixes
the issue by using hardware frame counter present in DECON to serialize
vblank and commit completion events.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21 13:17:21 +09:00
Lucas Stach ea9c260514 gpu: ipu-v3: add driver for Prefetch Resolve Gasket
This adds support for the i.MX6 QUadPlus PRG unit. It glues together the
IPU and the PRE units.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
v4: add missing ipu_soc->prg_priv
2017-03-16 10:14:02 +01:00
Philipp Zabel e72db3b1e5 gpu: ipu-v3: add support for separate alpha channels
The IPUv3 can read 8-bit alpha values from a separate IDMAC channel driven
by the Alpha Transparency Controller (ATC) for the graphics IDMAC channels.
This allows to reduce memory bandwidth via a conditional read mechanism or
to support planar YUV formats with alpha transparency.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15 15:42:31 +01:00
Philipp Zabel f9bb7acb9b gpu: ipu-v3: add unsynchronised DP channel disabling
When disabling the foreground DP channel during a modeset, the DC is
already disabled without waiting for end of frame. There is no reason
to wait for a frame boundary before updating the DP registers in that
case.
Add support to apply updates immediately. No functional changes, yet.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-15 15:28:27 +01:00
Andrzej Hajda 1514d50b7a drm/exynos/decon5433: signal vblank only on odd fields
In case of interlace mode irq is generated for odd and even fields, but
vblank should be signaled only for the last emitted field.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07 13:52:52 +09:00
Andrzej Hajda 5aa6c9ace5 drm/exynos/decon5433: add support for interlace modes
Some registers should be programmed differently in interlace mode.
Additionally IP does not signal stop state properly in interlaced
mode, so warning has been removed.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07 13:52:51 +09:00
Dave Airlie 1a3865d64a Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-next
rcar-du -next branch.

* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
  drm: rcar-du: Fix LVDS start sequence on Gen3
  drm: rcar-du: Fix H/V sync signal polarity configuration
  drm: rcar-du: Fix display timing controller parameter
  drm: rcar-du: Fix dot clock routing configuration
  drm: rcar-du: Add R8A7796 support
  drm: rcar-du: Add R8A7792 support
  drm: rcar-du: Simplify and fix probe error handling
  drm: rcar-du: Fix crash in encoder failure error path
  drm: rcar-du: Remove memory allocation error message
  drm: rcar-du: Remove test for impossible error condition
  drm: rcar-du: Bring HDMI encoder comments in line with the driver
  drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init()
  video: of: Constify node argument to display timing functions
2016-11-16 09:39:21 +10:00
Laurent Pinchart f5a000c9f8 video: of: Constify node argument to display timing functions
The node pointer passed to the display timing functions is never
modified, make it const.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-14 03:35:00 +02:00
Dave Airlie 628d16555e imx-drm plane update cleanup, YUV formats
- request modeset if plane offsets changed, only the plane base
   address can be changed without disabling the plane IDMAC channel.
 - cleanup of plane atomic_update
 - remove unused ipu_cpmem_set_yuv_planar function
 - support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats
 - not only mask interrupts during irq init, also clear them
 - remove a legacy check from imx-ldb
 - add support to set the CSI downsizing bits
 - silence an obnoxious warning during modeset
 -----BEGIN PGP SIGNATURE-----
 
 iQI1BAABCAAfBQJYJKqnGBxwaGlsaXBwLnphYmVsQGdtYWlsLmNvbQAKCRBQwogc
 cJ5g644rD/0cVFsbTLhXY3wLbntZXeDrWEaR+PCoEcibsscBaomv1wietpkFMTKx
 41S0HP8ygc912ptZ1JdgDIrDyDD6lsubpj3wUwOWz5zlbLtEOnF1S+C+kAbdJdyg
 8wKNpTz8fxvb7tN+iYwtlDyzrEEHr0OFWtqDruuLi6Ti/bMl5QUVs1j7LBEQksgn
 SmlU99xt84NyLYVm3B+BKAOW5LR1Kx1Qq50IBM9bH1dU8vLclAnsElTpeKppDcSL
 dvvkYfFQIUNVMn8/9CBrLLaiI76j45YAnvhMPZ+g9g9IMyHqVh4Rsato7Y+u7Z2R
 kKbwWmhyPMgTsrnpdvesg+9veJpv4/EDE1JEmpTzet0mmKEoUX6cfZUwF9vjvzGX
 LED7fmVXm5gMTMPt4Tw2j5ZzVzflw+zW2g5/8e2otVVhpxC5DHKlnsUJ1fddRzu2
 C4bD3CC0zmfN6EZZQT+n2kZSu4wZhd93WhffOSTShvypio1XZQlA2NiWIwSkNQe/
 vGGTtWTT1NnV4CxrX4d3SS9IN5JhYlXQAJHNRdutLNyRKJLo6Wa3ilt+wy5jDmh4
 uYHkdumGz+modtYv2b4OR9xdmLGt/ylkodlcXvpqmvBoL4RY6oPNRIeFMEOsUwlU
 FWajcHZw7MINlKubTZGP/eWxKgfsB7fk0lcqz03nOm2f+IwMGzUy2g==
 =uKg2
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm plane update cleanup, YUV formats

- request modeset if plane offsets changed, only the plane base
  address can be changed without disabling the plane IDMAC channel.
- cleanup of plane atomic_update
- remove unused ipu_cpmem_set_yuv_planar function
- support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats
- not only mask interrupts during irq init, also clear them
- remove a legacy check from imx-ldb
- add support to set the CSI downsizing bits
- silence an obnoxious warning during modeset

* tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-di: silence videomode logspam
  gpu: ipu-v3: add ipu_csi_set_downsize
  drm/imx: imx-ldb: remove unnecessary double disable check
  gpu: ipu-v3: initially clear all interrupts
  drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats
  gpu: ipu-v3: add YUV 4:4:4 support
  gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function
  drm/imx: ipuv3-plane: let drm_plane_state_to_ubo/vbo handle chroma subsampling other than 4:2:0
  drm/imx: ipuv3-plane: merge ipu_plane_atomic_set_base into atomic_update
  drm/imx: ipuv3-plane: request modeset if plane offsets changed
2016-11-11 09:31:27 +10:00
Philipp Zabel 867341b958 gpu: ipu-v3: add ipu_csi_set_downsize
Support downsizing to 1/2 width and/or height in the CSI.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-11-07 15:17:47 +01:00
Peter Ujfalusi e886fecbe7 video: display_timing: Add flags to select the edge when the sync is driven
The sync can be - and for some panels it must be - driven on different edge
then the data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02 10:48:18 +02:00
Philipp Zabel 9c24d680de gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function
ipu_cpmem_set_yuv_planar_full is only used directly, remove the wrapper.

Suggested-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
2016-10-20 14:40:02 +02:00
Linus Torvalds 084165a3f8 fbdev changes for 4.9
Main changes:
 
 - amba-cldc: DT backlight support, Nomadik support, Versatile improvements, fixes
 - efifb: fix fbcon RGB565 palette
 - exynos: remove unused DSI driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/f2zAAoJEPo9qoy8lh71a4sP/2lEHhzzqBri63FOrLaIGxUh
 lBZLSC9mMMzlsJtZhalaKBPe7dQ4EwPPqb7QiIuY71Q7Ap+j6oqaY7m4hgxsH4Zm
 jSgWNwVy+LhQ/r4eI355opvvHpGLZaIl6ZN8tFmvcm9bTE4iIkNkxq5Bhk6Bjwkc
 8jV8vwYRDfJA4NZgSuGIzRzLkscryy/QApaH536jDx4xoc+un6a759B6FQLAFVkS
 GwcjHbr3SSf5aj+0eEaJ59I3rgdPJy8YkFO7PpwKhgqTuCskOXKBvVtmlgfOh2vI
 76W2l3SELXCY7VmFkN0sp6xbPWYKIygdT849oF2grAPh/7ykOb0IsT4i4iVSzL29
 Nhl/G2s93NGFb3HtO0gAlBq9M0FSLQEywXPbN8GmiGVI5yHVYlFwKOL0H0uQANNl
 pCVCHuBkEkY2mX1QoCRhRl1ps9d+VfZzNo8I1JR6A8M52WtYjGiomISYz0dUmSFR
 3X5V6TLYFya+1sf3Gkvpl5yLkFB8NkCkdn6kcT1cpU2SyxzmQX5J/EwMlOXL1qSE
 d+pZZlMQ2Kli6LeMoAyzfdYgDWldP1CqU06Zcu3aFrAKmIZmLZGgJPq72TApK4L7
 o5R795aS6a/0CbihEuJt1LhR3QIQfYXlXJq860YT5he6yBO1wGC+JN2qMEFdU+SH
 phnxFjO2n/kI0JjQsewF
 =FN42
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 "Main changes:

   - amba-cldc: DT backlight support, Nomadik support, Versatile
     improvements, fixes

   - efifb: fix fbcon RGB565 palette

   - exynos: remove unused DSI driver"

* tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: smscufx: remove unused variable
  matroxfb: fix size of memcpy
  fbdev: ssd1307fb: fix a possible NULL dereference
  fbdev: ssd1307fb: constify the device_info pointer
  simplefb: Disable and release clocks and regulators in destroy callback
  video: fbdev: constify fb_fix_screeninfo and fb_var_screeninfo structures
  matroxfb: constify local structures
  video: fbdev: i810: add in missing white space in error message text
  video: fbdev: add missing \n at end of printk error message
  ARM: exynos_defconfig: Remove old non-working MIPI driver
  video: fbdev: exynos: Remove old non-working MIPI driver
  omapfb: fix return value check in dsi_bind()
  MAINTAINERS: update fbdev entries
  video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device
  fbdev: vfb: simplify memory management
  fbdev: vfb: add option for video mode
  fbdev: vfb: add description to module parameters
  video: fbdev: intelfb: remove impossible condition
  fb: adv7393: off by one in probe function
  video: fbdev: pxafb: add missing of_node_put() in of_get_pxafb_mode_info()
  ...
2016-10-12 11:01:37 -07:00
Krzysztof Kozlowski a38719b3dc video: fbdev: exynos: Remove old non-working MIPI driver
The old non-DRM Exynos MIPI driver does not support DeviceTree and
requires board files.  Our platforms do not provide such so the driver
is not usable since a long time ago.  All features provided by the
driver (and associated s6e8ax0 panel driver) are already supported by
newer DRM version so the old code can be removed.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27 11:05:29 +03:00
Steve Longerbeam cd98e85a6b gpu: ipu-v3: Add queued image conversion support
This patch implements image conversion support using the IC tasks, with
tiling to support scaling to and from images up to 4096x4096. Image
rotation is also supported. Image conversion requests are added to
a run queue under the IC tasks.

The internal API is subsystem agnostic (no V4L2 dependency except
for the use of V4L2 fourcc pixel formats).

Callers prepare for image conversion by calling
ipu_image_convert_prepare(), which initializes the parameters of
the conversion. The caller passes in the ipu and IC task to use for
the conversion, the input and output image formats, a rotation mode,
and a completion callback and completion context pointer:

struct ipu_image_converter_ctx *
ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
                          struct ipu_image *in, struct ipu_image *out,
                          enum ipu_rotate_mode rot_mode,
                          ipu_image_converter_cb_t complete,
                          void *complete_context);

A new conversion context is created that is added to an IC task
context queue. The caller is given the new conversion context,
which can then be passed to the further APIs:

int ipu_image_convert_queue(struct ipu_image_converter_run *run);

This queues the given image conversion request run to a run queue,
and starts the conversion immediately if the run queue is empty. Only
the physaddr's of the input and output image buffers are needed,
since the conversion context was created previously with
ipu_image_convert_prepare(). When the conversion completes, the run
pointer is returned to the completion callback.

void ipu_image_convert_abort(struct ipu_image_converter_ctx *ctx);

This will abort any active or pending conversions for this context.
Any currently active or pending runs belonging to this context are
returned via the completion callback with an error status.

void ipu_image_convert_unprepare(struct ipu_image_converter_ctx *ctx);

Unprepares the conversion context. Any active or pending runs will
be aborted by calling ipu_image_convert_abort().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-09-19 08:30:27 +02:00
Steve Longerbeam 8b9c3d5099 gpu: ipu-v3: Add ipu_rot_mode_is_irt()
Add a macro that returns boolean true if the given ipu_rotate_mode
requires the use of the Image Rotator.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-09-19 08:30:14 +02:00
Steve Longerbeam ac4708fab1 gpu: ipu-v3: Add FSU channel linking support
Adds functions to link and unlink source channels to sink
channels in the FSU:

int ipu_fsu_link(struct ipu_soc *ipu, int src_ch, int sink_ch);
int ipu_fsu_unlink(struct ipu_soc *ipu, int src_ch, int sink_ch);

The channels numbers are usually IDMAC channels, but they can also be
channels that do not transfer data to or from memory. The following
convenience functions can be used in place of ipu_fsu_link/unlink()
when both source and sink channels are IDMAC channels:

int ipu_idmac_link(struct ipuv3_channel *src, struct ipuv3_channel *sink);
int ipu_idmac_unlink(struct ipuv3_channel *src, struct ipuv3_channel *sink);

So far the following links are supported:

IPUV3_CHANNEL_IC_PRP_ENC_MEM -> IPUV3_CHANNEL_MEM_ROT_ENC
PUV3_CHANNEL_IC_PRP_VF_MEM   -> IPUV3_CHANNEL_MEM_ROT_VF
IPUV3_CHANNEL_IC_PP_MEM      -> IPUV3_CHANNEL_MEM_ROT_PP
IPUV3_CHANNEL_CSI_DIRECT     -> IPUV3_CHANNEL_CSI_VDI_PREV

More links can be added to the fsu_link_info[] array.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29 16:30:23 +02:00
Steve Longerbeam 2d2ead4530 gpu: ipu-v3: Add Video Deinterlacer unit
Adds the Video Deinterlacer (VDIC) unit.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29 16:30:11 +02:00
Philipp Zabel bc0a338750 gpu: ipu-v3: Add missing IDMAC channel names
This patch adds the remaining missing IDMAC channel names: VDIC channels
for combining, the separate alpha channels for the MEM->IC and MEM->DC
ASYNC channels, and the DC read, command, and output mask channels.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08 11:44:20 +02:00
Steve Longerbeam 97afc25c43 gpu: ipu-v3: Add VDI input IDMAC channels
Adds the VDIC field input IDMAC channels. These channels
transfer fields F(n-1), F(n), and F(N+1) from memory to
the VDIC (channels 8, 9, 10 respectively).

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08 11:44:20 +02:00
Steve Longerbeam 572a7615ae gpu: ipu-v3: Add ipu_get_num()
Adds of-alias id to ipu_soc and retrieve with ipu_get_num().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08 11:44:20 +02:00
Steve Longerbeam 03085911d7 gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize()
Adds ipu_cpmem_get_burstsize().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08 11:44:20 +02:00
Steve Longerbeam e5e8690ff0 gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset()
Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08 11:44:20 +02:00
Liu Ying d7868cb7ac gpu: ipu-v3: ipu-dmfc: Use static DMFC FIFO allocation mechanism
For all video modes we support currently, we always get 2 slots for
a plane by using the current existing dynamic DMFC FIFO allocation
mechanism.  So, let's change to use the static one to simplify the
code.  This also makes it easier to implement the atomic mode setting
as we don't need to handle allocation failure cases then.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12 18:23:43 +02:00
Tomi Valkeinen a1dec226a6 Merge omapdss header refactoring
Merge omapdss public header refactoring, which separates the public
header into omapdrm and omapfb parts.
2016-06-07 12:42:58 +03:00
Tomi Valkeinen ecf140dfc3 Merge branch '4.8/omapdrm-pll' (omapdrm PLL work)
Merge omapdrm PLL work, which makes it possible to use the DSS PLLs in a
versatile manner, for example, HDMI PLL can be used for LCDs.
2016-06-06 10:16:51 +03:00
Peter Ujfalusi 26038aad25 drm/omap: Remove the video/omapdss.h and move it's content to local header file
Move the contents of the video/omapdss.h header file to omapdrm/dss local
header file and remove the original global header. The omapfb stach is
using video/omapfb_dss.h so this change will complete the separation of the
two driver implementation.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:40 +03:00
Peter Ujfalusi 62d9e44ee2 omapfb: Create new header file for omapfb DSS implementation
Copy the content of video/omapdss.h to a new (video/omapfb_dss.h) header
file and convert the omapfb drivers to use this new file.

The new header file is needed to complete the separation of omapdrm and
omapfb implementation of DSS.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:38 +03:00
Peter Ujfalusi 5fd7447a21 omapdss: hdmi audio: Make header file independent of video/omapdss.h
Clean up the header files regarding to hdmi audio so the omap-hdmi-audio.h
file will only need to include the platform_data/omapdss.h file.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Mark Brown <broonie@kernel.org>
CC: Jyri Sarha <jsarha@ti.com>
CC: Liam Girdwood <liam.r.girdwood@linux.intel.com>
2016-06-03 16:06:36 +03:00
Peter Ujfalusi 85e882379d omapdss: omap-panel-data.h: Remove connector_type from atv pdata
The driver only supports composite connection when booted in legacy mode
so the omap_dss_venc_type can be dropped from the pdata.
At the same time the video/omapdss.h include can be removed as it is no
longer needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:32 +03:00
Peter Ujfalusi 66da14f75b omapdss: omap-panel-data.h: Remove struct omap_dss_device declaration
The omap_dss_device is not needed by anything in the header file.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:29 +03:00
Peter Ujfalusi b55753bed5 omapfb: encoder-tfp410: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:26 +03:00
Peter Ujfalusi 5996a5ae48 omapfb: connector-dvi: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:25 +03:00
Peter Ujfalusi b0417013d8 omapfb: connector-hdmi: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:24 +03:00
Peter Ujfalusi 0984097c03 omapfb: panel-dsi-cm: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:23 +03:00
Peter Ujfalusi f048e8c1d1 omapfb: panel-lgphilips-lb035q02: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:22 +03:00
Peter Ujfalusi d8647f9e1e omapfb: panel-sharp-ls037v7dw01: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:21 +03:00
Peter Ujfalusi 97177bdd49 omapfb: panel-tpo-td043mtea1: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:20 +03:00
Peter Ujfalusi 5daf2514fd omapfb: panel-nec-nl8048hl11: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:19 +03:00
Peter Ujfalusi 84d9140ddf omapfb: panel-tpo-td028ttec1: Remove legacy boot support
The panel is not used by any legacy board files so the legacy (pdata) boot
support can be dropped.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:06:18 +03:00
Peter Ujfalusi 60fc4bab91 video/platform_data: omapdss: Create new header file for platform data
Create a new header file for platform data used by omapdss.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03 16:00:45 +03:00