The translations guide need Noto CJK fonts. So, add a logic that
would suggest its install for distros.
It also fix a few other issues while testing the script
with several distributions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
On Gentoo, the portage changes for ImageMagick to work are
always suggested, even if already applied. While the two
extra commands should be harmless, add a check to avoid
reporting it without need.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The name of the package with carries latexmk is different
on two distros:
- On OpenSUSE, latexmk is packaged as "texlive-latexmk-bin"
- On Mageia, latexmk is packaged at "texlive-collection-basic"
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There aren't enough texlive packages for LaTeX-based builds
to work on CentOS/RHEL <= 7.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There's a missing parenthesis at the script, with causes it to
fail to detect non-Fedora releases (e. g. RHEL/CentOS).
Tested with Centos 7.6.1810.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Build of htmldocs fails for out-of-tree builds:
$ make V=1 O=~/build/kernel/ htmldocs
make -C /home/rppt/build/kernel -f /home/rppt/git/linux-docs/Makefile htmldocs
make[1]: Entering directory '/home/rppt/build/kernel'
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=Documentation htmldocs
Can't open Documentation/conf.py at /home/rppt/git/linux-docs/scripts/sphinx-pre-install line 230.
/home/rppt/git/linux-docs/Documentation/Makefile:80: recipe for target 'htmldocs' failed
make[2]: *** [htmldocs] Error 2
The scripts/sphinx-pre-install is trying to open files in the current
directory which is $KBUILD_OUTPUT rather than in $srctree.
Fix it.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into mauro
We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review and
analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPCHLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxyACgql6ktH+Tv8Ho1747kKPiFca1Jq0AoK5HORXI
yB0DSTXYNjMtH41ypnsZ
=x2f8
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call the script every time a make docs target is selected, on
a simplified check mode.
With this change, the script will set two vars:
$min_version - obtained from `needs_sphinx` var inside
conf.py (currently, '1.3')
$rec_version - obtained from sphinx/requirements.txt.
With those changes, a target like "make htmldocs" will do:
1) If no sphinx-build/sphinx-build3 is found, it will run
the script on normal mode as before, checking for all
system dependencies and providing install hints for the
needed programs and will abort the build;
2) If no sphinx-build/sphinx-build3 is found, but there is
a sphinx_${VER}/bin/activate file, and if
${VER} >= $min_version (string comparation), it will
run in full mode, and will recommend to activate the
virtualenv. If there are multiple virtualenvs, it
will string sort the versions, recommending the
highest version and will abort the build;
3) If Sphinx is detected but has a version lower than
$min_version, it will run in full mode - with will
recommend creating a virtual env using sphinx/requirements.txt,
and will abort the build.
4) If Sphinx is detected and version is lower than
$rec_version, it will run in full mode and will
recommend creating a virtual env using sphinx/requirements.txt.
In this case, it **won't** abort the build.
5) If Sphinx is detected and version is equal or righer than
$rec_version it will return just after detecting the
version ("quick mode"), not checking if are there any
missing dependencies.
Just like before, if one wants to install Sphinx from the
distro, it has to call the script manually and use `--no-virtualenv`
argument to get the hints for his OS:
You should run:
sudo dnf install -y python3-sphinx python3-sphinx_rtd_theme
While here, add a small help for the three optional arguments
for the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RHEL8 was already launched. This test won't get it, and will
do the wrong thing. Ok, we could fix it, but now we check
Sphinx version to ensure that it matches the minimal (1.3),
so there's no need for an explicit check there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It is possible that multiple Sphinx virtualenvs are installed
on a given kernel tree. Change the logic to get the latest
version of those, as this is probably what the user wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As we want to switch to a newer Sphinx version in the future,
add some version detected logic, checking if the current
version meets the requirement and suggesting upgrade it the
version is supported but too old.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The usage of latexmk improves the PDF output, as it re-run
xelatex when it detects the need, in order to properly generate
indexes and cross-references.
As this is not a mandatory requirement, only suggest its
addition.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Only the media PDF book was requiring adjustbox, in order to
scale big tables. That worked pretty good with Sphinx versions
1.4 and 1.5, but Spinx 1.6 changed the way tables are produced,
by introducing some weird macros before tabulary.
That causes adjustbox to fail. So, it can't be used anymore,
and its usage was removed from the media book.
So, let's remove it from conf.py and sphinx-pre-install.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RHEL 7.x and clone distros are shipped with Sphinx 1.1.x,
with is incompatible with Kernel ReST markups.
So, on those systems, the only alternative is to install
it via a Python virtual environment.
While seeking for "pip" on CentOS 7.3, I noticed that it
is not really needed, as python-virtualenv has its version
packaged there already. So, remove this from the list of
requirements for all distributions.
With regards to PDF, we need at least texlive-tabulary
extension, but that is not shipped there (at least on
CentOS). So, disable PDF packages as a whole.
Please notice, however, that texlive + amsmath is needed for
ReST to properly handle ReST ".. math::" tags. Yet, Sphinx
fall back to display the LaTeX math expressions as-is, if
such extension is not available.
So, let's just disable all texlive packages as a whole.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for detecting and installing missing packages
on Mageia. I opted to use "urpmi" at the install instructions,
as this is present on Mageia since ever. Yet, if I were using
Mageia 6, I would likely be using "dnf", as it is, IMHO,
easier to use.
Tested with Mageia 6.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Gentoo need some USE for GraphViz and ImageMagick to have
the features required by kfigure.py.
Output that when providing instructions for Gentoo.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
ImageMagick actually uses librsvg for conversions when converiting
from SVG (actually, it uses rsvg-convert). That causes the build to
fail with:
WARNING: Error #1 when calling: /usr/bin/convert /home/mchehab/docs/Documentation/media/uapi/v4l/selection.svg /home/mchehab/docs/Documentation/output/latex/selection.pdf
convert: delegate failed `'rsvg-convert' -o '%o' '%i'' @ error/delegate.c/InvokeDelegate/1919.
convert: unable to open file `/tmp/magick-8883oOQfHzrA5trM': No such file or directory @ error/constitute.c/ReadImage/544.
Add the corresponding dependencies.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On newer versions of graphviz packaging on Fedora, it is needed to
install a separate package for PDF support.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of using 3 commands to install a virtualenv, use
a single one, reading the requirements from this file:
Documentation/sphinx/requirements.txt
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Detect if the script runs after creating the virtualenv,
printing the command line commands to enable the virtualenv.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Solving Sphinx dependencies can be painful. Add a script to
check if everything is ok.
Tested on:
- Fedora 25 and 26;
- Ubuntu 17.04;
- OpenSuse Tumbleweed;
- Arch Linux;
- Gentoo.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab