Commit Graph

11669 Commits

Author SHA1 Message Date
Steven Rostedt a1cd617359 ftrace: Have ftrace_startup() return failure code
The register_ftrace_function() returns an error code on failure
except if the call to ftrace_startup() fails. Add a error return to
ftrace_startup() if it fails to start, allowing register_ftrace_funtion()
to return a proper error value.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 22:13:37 -04:00
Jiri Olsa 7cbc5b8d4a jump_label: Check entries limit in __jump_label_update
When iterating the jump_label entries array (core or modules),
the __jump_label_update function peeks over the last entry.

The reason is that the end of the for loop depends on the key
value of the processed entry. Thus when going through the
last array entry, we will touch the memory behind the array
limit.

This bug probably will never be triggered, since most likely the
memory behind the jump_label entries will be accesable and the
entry->key will be different than the expected value.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/20110510104346.GC1899@jolsa.brq.redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 19:56:36 -04:00
Ingo Molnar 6e9101aeec watchdog: Fix non-standard prototype of get_softlockup_thresh()
This build warning slipped through:

  kernel/watchdog.c:102: warning: function declaration isn't a prototype

As reported by Stephen Rothwell.

Also address an unused variable warning that GCC 4.6.0 reports:
we cannot do anything about failed watchdog ops during CPU hotplug
(it's not serious enough to return an error from the notifier),
so ignore them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110524134129.8da27016.sfr@canb.auug.org.au
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-24 05:53:39 +02:00
Ingo Molnar 8ce2616955 Merge commit '559fa6e76b27' into perf/urgent
Merge reason: this commit was queued up quite some time ago but was
              forgotten about.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23 16:15:58 +02:00
Mandeep Singh Baines 4eec42f392 watchdog: Change the default timeout and configure nmi watchdog period based on watchdog_thresh
Before the conversion of the NMI watchdog to perf event, the
watchdog timeout was 5 seconds. Now it is 60 seconds. For my
particular application, netbooks, 5 seconds was a better
timeout. With a short timeout, we catch faults earlier and are
able to send back a panic. With a 60 second timeout, the user is
unlikely to wait and will instead hit the power button, causing
us to lose the panic info.

This change configures the NMI period to watchdog_thresh and
sets the softlockup_thresh to watchdog_thresh * 2. In addition,
watchdog_thresh was reduced to 10 seconds as suggested by Ingo
Molnar.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-23 11:58:59 +02:00
Mandeep Singh Baines 586692a5a5 watchdog: Disable watchdog when thresh is zero
This restores the previous behavior of softlock_thresh.

Currently, setting watchdog_thresh to zero causes the watchdog
kthreads to consume a lot of CPU.

In addition, the logic of proc_dowatchdog_thresh and
proc_dowatchdog_enabled has been factored into proc_dowatchdog.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-3-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071018.GE22305@elte.hu>
2011-05-23 11:58:59 +02:00
Mandeep Singh Baines e04ab2bc41 watchdog: Only disable/enable watchdog if neccessary
Don't take any action on an unsuccessful write to /proc.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-2-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23 11:58:58 +02:00
Mandeep Singh Baines 824c6b7f62 watchdog: Fix rounding bug in get_sample_period()
In get_sample_period(), softlockup_thresh is integer divided by
5 before the multiplication by NSEC_PER_SEC. This results in
softlockup_thresh being rounded down to the nearest integer
multiple of 5.

For example, a softlockup_thresh of 4 rounds down to 0.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-1-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23 11:58:58 +02:00
Steven Rostedt a2d063ac21 extable, core_kernel_data(): Make sure all archs define _sdata
A new utility function (core_kernel_data()) is used to determine if a
passed in address is part of core kernel data or not. It may or may not
return true for RO data, but this utility must work for RW data.

Thus both _sdata and _edata must be defined and continuous,
without .init sections that may later be freed and replaced by
volatile memory (memory that can be freed).

This utility function is used to determine if data is safe from
ever being freed. Thus it should return true for all RW global
data that is not in a module or has been allocated, or false
otherwise.

Also change core_kernel_data() back to the more precise _sdata condition
and document the function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: JamesE.J.Bottomley <jejb@parisc-linux.org>
Link: http://lkml.kernel.org/r/1305855298.1465.19.camel@gandalf.stny.rr.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
----
 arch/alpha/kernel/vmlinux.lds.S   |    1 +
 arch/m32r/kernel/vmlinux.lds.S    |    1 +
 arch/m68k/kernel/vmlinux-std.lds  |    2 ++
 arch/m68k/kernel/vmlinux-sun3.lds |    1 +
 arch/mips/kernel/vmlinux.lds.S    |    1 +
 arch/parisc/kernel/vmlinux.lds.S  |    3 +++
 kernel/extable.c                  |   12 +++++++++++-
 7 files changed, 20 insertions(+), 1 deletion(-)
2011-05-20 08:56:56 +02:00
Ingo Molnar c16dbd54a3 Merge branch 'perf/core' into perf/urgent
Merge reason: One pending commit was left in perf/core after Linus merged
              perf/core - continue v2.6.40 work in the perf/urgent reason.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20 08:54:08 +02:00
Linus Torvalds 39ab05c8e0 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits)
  debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
  sysfs: remove "last sysfs file:" line from the oops messages
  drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"
  memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION
  SYSFS: Fix erroneous comments for sysfs_update_group().
  driver core: remove the driver-model structures from the documentation
  driver core: Add the device driver-model structures to kerneldoc
  Translated Documentation/email-clients.txt
  RAW driver: Remove call to kobject_put().
  reboot: disable usermodehelper to prevent fs access
  efivars: prevent oops on unload when efi is not enabled
  Allow setting of number of raw devices as a module parameter
  Introduce CONFIG_GOOGLE_FIRMWARE
  driver: Google Memory Console
  driver: Google EFI SMI
  x86: Better comments for get_bios_ebda()
  x86: get_bios_ebda_length()
  misc: fix ti-st build issues
  params.c: Use new strtobool function to process boolean inputs
  debugfs: move to new strtobool
  ...

Fix up trivial conflicts in fs/debugfs/file.c due to the same patch
being applied twice, and an unrelated cleanup nearby.
2011-05-19 18:24:11 -07:00
Linus Torvalds eb04f2f04e Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (78 commits)
  Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
  net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfree
  batman,rcu: convert call_rcu(softif_neigh_free_rcu) to kfree_rcu
  batman,rcu: convert call_rcu(neigh_node_free_rcu) to kfree()
  batman,rcu: convert call_rcu(gw_node_free_rcu) to kfree_rcu
  net,rcu: convert call_rcu(kfree_tid_tx) to kfree_rcu()
  net,rcu: convert call_rcu(xt_osf_finger_free_rcu) to kfree_rcu()
  net/mac80211,rcu: convert call_rcu(work_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(wq_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(phonet_device_rcu_free) to kfree_rcu()
  perf,rcu: convert call_rcu(swevent_hlist_release_rcu) to kfree_rcu()
  perf,rcu: convert call_rcu(free_ctx) to kfree_rcu()
  net,rcu: convert call_rcu(__nf_ct_ext_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(net_generic_release) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr6) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr4) to kfree_rcu()
  security,rcu: convert call_rcu(sel_netif_free) to kfree_rcu()
  net,rcu: convert call_rcu(xps_dev_maps_release) to kfree_rcu()
  net,rcu: convert call_rcu(xps_map_release) to kfree_rcu()
  net,rcu: convert call_rcu(rps_map_release) to kfree_rcu()
  ...
2011-05-19 18:14:34 -07:00
Linus Torvalds 78c4def67e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Make lookup table const
  RTC: Disable CONFIG_RTC_CLASS from being built as a module
  timers: Fix alarmtimer build issues when CONFIG_RTC_CLASS=n
  timers: Remove delayed irqwork from alarmtimers implementation
  timers: Improve alarmtimer comments and minor fixes
  timers: Posix interface for alarm-timers
  timers: Introduce in-kernel alarm-timer interface
  timers: Add rb_init_node() to allow for stack allocated rb nodes
  time: Add timekeeping_inject_sleeptime
2011-05-19 17:45:08 -07:00
Linus Torvalds 7e6628e4bc Merge branch 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Cleanup the clockevents init and register code
  x86: Convert PIT to clockevents_config_and_register()
  clockevents: Provide interface to reconfigure an active clock event device
  clockevents: Provide combined configure and register function
  clockevents: Restructure clock_event_device members
  clocksource: Get rid of the hardcoded 5 seconds sleep time limit
  clocksource: Restructure clocksource struct members
2011-05-19 17:44:40 -07:00
Linus Torvalds 80fe02b5da Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  sched: Fix and optimise calculation of the weight-inverse
  sched: Avoid going ahead if ->cpus_allowed is not changed
  sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
  sched: Remove unused parameters from sched_fork() and wake_up_new_task()
  sched: Shorten the construction of the span cpu mask of sched domain
  sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
  sched: Remove unused 'this_best_prio arg' from balance_tasks()
  sched: Remove noop in alloc_rt_sched_group()
  sched: Get rid of lock_depth
  sched: Remove obsolete comment from scheduler_tick()
  sched: Fix sched_domain iterations vs. RCU
  sched: Next buddy hint on sleep and preempt path
  sched: Make set_*_buddy() work on non-task entities
  sched: Remove need_migrate_task()
  sched: Move the second half of ttwu() to the remote cpu
  sched: Restructure ttwu() some more
  sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
  sched: Remove rq argument from ttwu_stat()
  sched: Remove rq->lock from the first half of ttwu()
  sched: Drop rq->lock from sched_exec()
  ...

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix rt_rq runtime leakage bug
2011-05-19 17:41:22 -07:00
Linus Torvalds df48d8716e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
  perf stat: Add more cache-miss percentage printouts
  perf stat: Add -d -d and -d -d -d options to show more CPU events
  ftrace/kbuild: Add recordmcount files to force full build
  ftrace: Add self-tests for multiple function trace users
  ftrace: Modify ftrace_set_filter/notrace to take ops
  ftrace: Allow dynamically allocated function tracers
  ftrace: Implement separate user function filtering
  ftrace: Free hash with call_rcu_sched()
  ftrace: Have global_ops store the functions that are to be traced
  ftrace: Add ops parameter to ftrace_startup/shutdown functions
  ftrace: Add enabled_functions file
  ftrace: Use counters to enable functions to trace
  ftrace: Separate hash allocation and assignment
  ftrace: Create a global_ops to hold the filter and notrace hashes
  ftrace: Use hash instead for FTRACE_FL_FILTER
  ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
  perf bench, x86: Add alternatives-asm.h wrapper
  x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
  x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
  x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
  ...
2011-05-19 17:36:08 -07:00
Linus Torvalds acd30250d7 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Export functions to allow modular irq drivers
  genirq: Uninline and sanity check generic_handle_irq()
  genirq: Remove pointless ifdefs
  genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP
  genirq: Add chip suspend and resume callbacks
  genirq: Implement a generic interrupt chip
  genirq: Support per-IRQ thread disabling.
  genirq: irq_desc: Document preflow_handler and affinity_hint
  genirq: Update DocBook comments
  genirq: Forgotten updates/deletions after removal of compat code
2011-05-19 17:30:15 -07:00
Linus Torvalds 6595b4a940 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  seqlock: Don't smp_rmb in seqlock reader spin loop
  watchdog, hung_task_timeout: Add Kconfig configurable default
  lockdep: Remove cmpxchg to update nr_chain_hlocks
  lockdep: Print a nicer description for simple irq lock inversions
  lockdep: Replace "Bad BFS generated tree" message with something less cryptic
  lockdep: Print a nicer description for irq inversion bugs
  lockdep: Print a nicer description for simple deadlocks
  lockdep: Print a nicer description for normal deadlocks
  lockdep: Print a nicer description for irq lock inversions
2011-05-19 17:29:29 -07:00
Linus Torvalds 51509a283a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits)
  PM: Introduce generic prepare and complete callbacks for subsystems
  PM: Allow drivers to allocate memory from .prepare() callbacks safely
  PM: Remove CONFIG_PM_VERBOSE
  Revert "PM / Hibernate: Reduce autotuned default image size"
  PM / Hibernate: Add sysfs knob to control size of memory for drivers
  PM / Wakeup: Remove useless synchronize_rcu() call
  kmod: always provide usermodehelper_disable()
  PM / ACPI: Remove acpi_sleep=s4_nonvs
  PM / Wakeup: Fix build warning related to the "wakeup" sysfs file
  PM: Print a warning if firmware is requested when tasks are frozen
  PM / Runtime: Rework runtime PM handling during driver removal
  Freezer: Use SMP barriers
  PM / Suspend: Do not ignore error codes returned by suspend_enter()
  PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
  PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
  OMAP1 / PM: Use generic clock manipulation routines for runtime PM
  PM: Remove sysdev suspend, resume and shutdown operations
  PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
  PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
  PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  ...
2011-05-19 16:46:07 -07:00
Ingo Molnar c5fc472171 core_kernel_data(): Fix architectures that do not define _sdata
Some architectures such as Alpha do not define _sdata but _data:

  kernel/built-in.o: In function `core_kernel_data':
  kernel/extable.c:77: undefined reference to `_sdata'

So expand the scope of the data range to the text addresses too,
this might be more correct anyway because this way we can
cover readonly variables as well.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-i878c8a0e0g0ep4v7i6vxnhz@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20 01:27:16 +02:00
Paul E. McKenney 80d02085d9 Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
This reverts commit e59fb3120b.

This reversion was due to (extreme) boot-time slowdowns on SPARC seen by
Yinghai Lu and on x86 by Ingo
.
This is a non-trivial reversion due to intervening commits.

Conflicts:

	Documentation/RCU/trace.txt
	kernel/rcutree.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-19 23:25:29 +02:00
Thomas Gleixner 80b816b736 clockevents: Provide interface to reconfigure an active clock event device
Some ARM SoCs have clock event devices which have their frequency
modified due to frequency scaling. Provide an interface which allows
to reconfigure an active device. After reconfiguration reprogram the
current pending event.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.437459958%40linutronix.de%3E
2011-05-19 14:24:16 +02:00
Thomas Gleixner 57f0fcbe1d clockevents: Provide combined configure and register function
All clockevent devices have the same open coded initialization
functions. Provide an interface which does all necessary
initialization in the core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.331975870%40linutronix.de%3E
2011-05-19 14:24:15 +02:00
Thomas Gleixner 724ed53e8a clocksource: Get rid of the hardcoded 5 seconds sleep time limit
Slow clocksources can have a way longer sleep time than 5 seconds and
even fast ones can easily cope with 600 seconds and still maintain
proper accuracy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.109811585%40linutronix.de%3E
2011-05-19 14:24:15 +02:00
Jonathan Cameron f721a465cd params.c: Use new strtobool function to process boolean inputs
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:28 +09:30
Alessio Igor Bogani 9d63487f86 module: Use binary search in lookup_symbol()
The function is_exported() with its helper function lookup_symbol() are used to
verify if a provided symbol is effectively exported by the kernel or by the
modules. Now that both have their symbols sorted we can replace a linear search
with a binary search which provide a considerably speed-up.

This work was supported by a hardware donation from the CE Linux Forum.

Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:27 +09:30
Alessio Igor Bogani 403ed27846 module: Use the binary search for symbols resolution
Takes advantage of the order and locates symbols using binary search.

This work was supported by a hardware donation from the CE Linux Forum.

Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dirk Behme <dirk.behme@googlemail.com>
2011-05-19 16:55:27 +09:30
Rusty Russell de4d8d5346 module: each_symbol_section instead of each_symbol
Instead of having a callback function for each symbol in the kernel,
have a callback for each array of symbols.

This eases the logic when we move to sorted symbols and binary search.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Alessio Igor Bogani <abogani@kernel.org>
2011-05-19 16:55:26 +09:30
Jan Glauber 01526ed083 module: split unset_section_ro_nx function.
Split the unprotect function into a function per section to make
the code more readable and add the missing static declaration.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:26 +09:30
Jan Glauber 448694a1d5 module: undo module RONX protection correctly.
While debugging I stumbled over two problems in the code that protects module
pages.

First issue is that disabling the protection before freeing init or unload of
a module is not symmetric with the enablement. For instance, if pages are set
to RO the page range from module_core to module_core + core_ro_size is
protected. If a module is unloaded the page range from module_core to
module_core + core_size is set back to RW.
So pages that were not set to RO are also changed to RW.
This is not critical but IMHO it should be symmetric.

Second issue is that while set_memory_rw & set_memory_ro are used for
RO/RW changes only set_memory_nx is involved for NX/X. One would await that
the inverse function is called when the NX protection should be removed,
which is not the case here, unless I'm missing something.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:26 +09:30
Jan Glauber 4d10380e72 module: zero mod->init_ro_size after init is freed.
Reset mod->init_ro_size to zero after the init part of a module is unloaded.
Otherwise we need to check if module->init is NULL in the unprotect functions
in the next patch.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:26 +09:30
Daniel J Blueman 5d05c70849 minor ANSI prototype sparse fix
Fix function prototype to be ANSI-C compliant, consistent with other
function prototypes, addressing a sparse warning.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:25 +09:30
Dmitry Torokhov b4bc842802 module: deal with alignment issues in built-in module versions
On m68k natural alignment is 2-byte boundary but we are trying to
align structures in __modver section on sizeof(void *) boundary.
This causes trouble when we try to access elements in this section
in array-like fashion when create "version" attributes for built-in
modules.

Moreover, as DaveM said, we can't reliably put structures into
independent objects, put them into a special section, and then expect
array access over them (via the section boundaries) after linking the
objects together to just "work" due to variable alignment choices in
different situations. The only solution that seems to work reliably
is to make an array of plain pointers to the objects in question and
put those pointers in the special section.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-19 16:55:24 +09:30
Steven Rostedt 95950c2ecb ftrace: Add self-tests for multiple function trace users
Add some basic sanity tests for multiple users of the function
tracer at startup.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 19:24:51 -04:00
Steven Rostedt 936e074b28 ftrace: Modify ftrace_set_filter/notrace to take ops
Since users of the function tracer can now pick and choose which
functions they want to trace agnostically from other users of the
function tracer, we need to pass the ops struct to the ftrace_set_filter()
functions.

The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
is added to keep the old filter functions which are used to modify
the generic function tracers.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 19:22:52 -04:00
Steven Rostedt cdbe61bfe7 ftrace: Allow dynamically allocated function tracers
Now that functions may be selected individually, it only makes sense
that we should allow dynamically allocated trace structures to
be traced. This will allow perf to allocate a ftrace_ops structure
at runtime and use it to pick and choose which functions that
structure will trace.

Note, a dynamically allocated ftrace_ops will always be called
indirectly instead of being called directly from the mcount in
entry.S. This is because there's no safe way to prevent mcount
from being preempted before calling the function, unless we
modify every entry.S to do so (not likely). Thus, dynamically allocated
functions will now be called by the ftrace_ops_list_func() that
loops through the ops that are allocated if there are more than
one op allocated at a time. This loop is protected with a
preempt_disable.

To determine if an ftrace_ops structure is allocated or not, a new
util function was added to the kernel/extable.c called
core_kernel_data(), which returns 1 if the address is between
_sdata and _edata.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:51 -04:00
Steven Rostedt b848914ce3 ftrace: Implement separate user function filtering
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Steven Rostedt 07fd5515f3 ftrace: Free hash with call_rcu_sched()
When a hash is modified and might be in use, we need to perform
a schedule RCU operation on it, as the hashes will soon be used
directly in the function tracer callback.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Steven Rostedt 2b499381bc ftrace: Have global_ops store the functions that are to be traced
This is a step towards each ops structure defining its own set
of functions to trace. As the current code with pid's and such
are specific to the global_ops, it is restructured to be used
with the global ops.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:49 -04:00
Steven Rostedt bd69c30b1d ftrace: Add ops parameter to ftrace_startup/shutdown functions
In order to allow different ops to enable different functions,
the ftrace_startup() and ftrace_shutdown() functions need the
ops parameter passed to them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:48 -04:00
Steven Rostedt 647bcd03d5 ftrace: Add enabled_functions file
Add the enabled_functions file that is used to show all the
functions that have been enabled for tracing as well as their
ref counts. This helps seeing if any function has been registered
and what functions are being traced.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:47 -04:00
Steven Rostedt ed926f9b35 ftrace: Use counters to enable functions to trace
Every function has its own record that stores the instruction
pointer and flags for the function to be traced. There are only
two flags: enabled and free. The enabled flag states that tracing
for the function has been enabled (actively traced), and the free
flag states that the record no longer points to a function and can
be used by new functions (loaded modules).

These flags are now moved to the MSB of the flags (actually just
the top 32bits). The rest of the bits (30 bits) are now used as
a ref counter. Everytime a tracer register functions to trace,
those functions will have its counter incremented.

When tracing is enabled, to determine if a function should be traced,
the counter is examined, and if it is non-zero it is set to trace.

When a ftrace_ops is registered to trace functions, its hashes
are examined. If the ftrace_ops filter_hash count is zero, then
all functions are set to be traced, otherwise only the functions
in the hash are to be traced. The exception to this is if a function
is also in the ftrace_ops notrace_hash. Then that function's counter
is not incremented for this ftrace_ops.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:47 -04:00
Steven Rostedt 33dc9b1267 ftrace: Separate hash allocation and assignment
When filtering, allocate a hash to insert the function records.
After the filtering is complete, assign it to the ftrace_ops structure.

This allows the ftrace_ops structure to have a much smaller array of
hash buckets instead of wasting a lot of memory.

A read only empty_hash is created to be the minimum size that any ftrace_ops
can point to.

When a new hash is created, it has the following steps:

o Allocate a default hash.
o Walk the function records assigning the filtered records to the hash
o Allocate a new hash with the appropriate size buckets
o Move the entries from the default hash to the new hash.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:46 -04:00
Steven Rostedt f45948e898 ftrace: Create a global_ops to hold the filter and notrace hashes
Combine the filter and notrace hashes to be accessed by a single entity,
the global_ops. The global_ops is a ftrace_ops structure that is passed
to different functions that can read or modify the filtering of the
function tracer.

The ftrace_ops structure was modified to hold a filter and notrace
hashes so that later patches may allow each ftrace_ops to have its own
set of rules to what functions may be filtered.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:45 -04:00
Steven Rostedt 1cf41dd799 ftrace: Use hash instead for FTRACE_FL_FILTER
When multiple users are allowed to have their own set of functions
to trace, having the FTRACE_FL_FILTER flag will not be enough to
handle the accounting of those users. Each user will need their own
set of functions.

Replace the FTRACE_FL_FILTER with a filter_hash instead. This is
temporary until the rest of the function filtering accounting
gets in.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:44 -04:00
Steven Rostedt b448c4e3ae ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
To prepare for the accounting system that will allow multiple users of
the function tracer, having the FTRACE_FL_NOTRACE as a flag in the
dyn_trace record does not make sense.

All ftrace_ops will soon have a hash of functions they should trace
and not trace. By making a global hash of functions not to trace makes
this easier for the transition.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:44 -04:00
Jonathan Cameron edf76f8307 irq: Export functions to allow modular irq drivers
Export handle_simple_irq, irq_modify_status, irq_alloc_descs,
irq_free_descs and generic_handle_irq to allow their usage in
modules. First user is IIO, which wants to be built modular, but needs
to be able to create irq chips, allocate and configure interrupt
descriptors and handle demultiplexing interrupts.

[ tglx: Moved the uninlinig of generic_handle_irq to a separate patch ]

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Link: http://lkml.kernel.org/r/%3C1305711544-505-1-git-send-email-jic23%40cam.ac.uk%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-18 14:59:08 +02:00
Thomas Gleixner fe12bc2c99 genirq: Uninline and sanity check generic_handle_irq()
generic_handle_irq() is missing a NULL pointer check for the result of
irq_to_desc. This was a not a big problem, but we want to expose it to
drivers, so we better have sanity checks in place. Add a return value
as well, which indicates that the irq number was valid and the handler
was invoked.

Based on the pure code move from Jonathan Cameron.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
2011-05-18 14:59:08 +02:00
Thomas Gleixner fe05143484 genirq: Remove pointless ifdefs
kernel/irq/ is only built when CONFIG_GENERIC_HARDIRQS=y. So making
code inside of kernel/irq/ conditional on CONFIG_GENERIC_HARDIRQS is
pointless.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-18 14:59:07 +02:00
Rafael J. Wysocki 91e7c75ba9 PM: Allow drivers to allocate memory from .prepare() callbacks safely
If device drivers allocate substantial amounts of memory (above 1 MB)
in their hibernate .freeze() callbacks (or in their legacy suspend
callbcks during hibernation), the subsequent creation of hibernate
image may fail due to the lack of memory.  This is the case, because
the drivers' .freeze() callbacks are executed after the hibernate
memory preallocation has been carried out and the preallocated amount
of memory may be too small to cover the new driver allocations.
Unfortunately, the drivers' .prepare() callbacks also are executed
after the hibernate memory preallocation has completed, so they are
not suitable for allocating additional memory either.  Thus the only
way a driver can safely allocate memory during hibernation is to use
a hibernate/suspend notifier.  However, the notifiers are called
before the freezing of user space and the drivers wanting to use them
for allocating additional memory may not know how much memory needs
to be allocated at that point.

To let device drivers overcome this difficulty rework the hibernation
sequence so that the memory preallocation is carried out after the
drivers' .prepare() callbacks have been executed, so that the
.prepare() callbacks can be used for allocating additional memory
to be used by the drivers' .freeze() callbacks.  Update documentation
to match the new behavior of the code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:26:00 +02:00