Commit Graph

654 Commits

Author SHA1 Message Date
Rafael J. Wysocki 10e8b11eb3 cpuidle: Rearrange s2idle-specific idle state entry code
Implement call_cpuidle_s2idle() in analogy with call_cpuidle()
for the s2idle-specific idle state entry and invoke it from
cpuidle_idle_call() to make the s2idle-specific idle entry code
path look more similar to the "regular" idle entry one.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
2020-06-25 13:52:53 +02:00
Chen Yu 81e6737518 PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle
Suspend to idle was found to not work on Goldmont CPU recently.

The issue happens due to:

 1. On Goldmont the CPU in idle can only be woken up via IPIs,
    not POLLING mode, due to commit 08e237fa56 ("x86/cpu: Add
    workaround for MONITOR instruction erratum on Goldmont based
    CPUs")

 2. When the CPU is entering suspend to idle process, the
    _TIF_POLLING_NRFLAG remains on, because cpuidle_enter_s2idle()
    doesn't match call_cpuidle() exactly.

 3. Commit b2a02fc43a ("smp: Optimize send_call_function_single_ipi()")
    makes use of _TIF_POLLING_NRFLAG to avoid sending IPIs to idle
    CPUs.

 4. As a result, some IPIs related functions might not work
    well during suspend to idle on Goldmont. For example, one
    suspected victim:

    tick_unfreeze() -> timekeeping_resume() -> hrtimers_resume()
    -> clock_was_set() -> on_each_cpu() might wait forever,
    because the IPIs will not be sent to the CPUs which are
    sleeping with _TIF_POLLING_NRFLAG set, and Goldmont CPU
    could not be woken up by only setting _TIF_NEED_RESCHED
    on the monitor address.

To avoid that, clear the _TIF_POLLING_NRFLAG flag before invoking
enter_s2idle_proper() in cpuidle_enter_s2idle() in analogy with the
call_cpuidle() code flow.

Fixes: b2a02fc43a ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject / changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-23 17:06:55 +02:00
Linus Torvalds df2fbf5bfa - Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)
 
 - Use the PM QoS frequency changes for the devfreq cooling device (Matthias
   Kaehlcke)
 
 - Remove duplicate error messages from platform_get_irq() error handling
   (Markus Elfring)
 
 - Add support for the bandgap sensors (Keerthy)
 
 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
 
 - Add Renesas R-Car maintainer entry (Niklas Söderlund)
 
 - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC
   thermal (Sudip Mukherjee)
 
 - Add latency constraint for the idle injection, the DT binding and the change
   the registering function (Daniel Lezcano)
 
 - Convert the thermal framework binding to the Yaml schema (Amit Kucheria)
 
 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva)
 
 - Thermal framework cleanups (alphabetic order for heads, replace module.h by
   export.h, make file naming consistent) (Amit Kucheria)
 
 - Merge tsens-common into the tsens driver (Amit Kucheria)
 
 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
 
 - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver
   (Niklas Söderlund)
 
 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang)
 
 - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x
   thermal driver - trivial conflicts fixed (Matthew Garrett)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP
 6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M
 D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv
 M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr
 O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF
 zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG
 dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw==
 =T+RI
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...
2020-06-12 14:10:21 -07:00
Linus Torvalds 7ae77150d9 powerpc updates for 5.8
- Support for userspace to send requests directly to the on-chip GZIP
    accelerator on Power9.
 
  - Rework of our lockless page table walking (__find_linux_pte()) to make it
    safe against parallel page table manipulations without relying on an IPI for
    serialisation.
 
  - A series of fixes & enhancements to make our machine check handling more
    robust.
 
  - Lots of plumbing to add support for "prefixed" (64-bit) instructions on
    Power10.
 
  - Support for using huge pages for the linear mapping on 8xx (32-bit).
 
  - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
 
  - Removal of some obsolete 40x platforms and associated cruft.
 
  - Initial support for booting on Power10.
 
  - Lots of other small features, cleanups & fixes.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
   Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
   Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
   Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
   George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
   Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
   Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
   Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
   Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
   Sang, Xiongfeng Wang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
 GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
 v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
 kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
 yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
 2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
 CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
 rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
 FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
 65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
 rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
 G3PXIBOI0jRgRw==
 =o0WU
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...
2020-06-05 12:39:30 -07:00
Linus Torvalds 828f3e18e1 ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
2020-06-04 19:56:20 -07:00
Qiushi Wu c343bf1ba5 cpuidle: Fix three reference count leaks
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-29 18:07:18 +02:00
Stephan Gerhold a871be6b8e cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.

Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:

  - We can parse the CPUidle states in the device tree directly
    with dt_idle_states (and don't need to duplicate that
    functionality into the spm driver).

  - Each "saw" device managed by the SPM driver now directly
    registers its own cpuidle driver, removing the need for
    any global (per cpu) state.

The device tree binding is the same, so the driver stays
compatible with all old device trees.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-26 10:46:01 +02:00
Hanjun Guo cce55cc902 cpuidle: sysfs: Remove sysfs_switch and switch attributes
Since the cpuidle governor can be switched via sysfs in default,
remove sysfs_switch and cpuidle_switch_attrs.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo b52e93e4e8 cpuidle: Make cpuidle governor switchable to be the default behaviour
For now cpuidle governor can be switched via sysfs only when the
boot option "cpuidle_sysfs_switch" is passed, but it's important
to switch the governor to adapt to different workloads, especially
after TEO and haltpoll governor were introduced.

Add available_governors and current_governor into the default
attributes, but reserve the current_governor_ro for compatiblity.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo ef7e7d65eb cpuidle: sysfs: Accept governor name with 15 characters
CPUIDLE_NAME_LEN is 16, so it's possible to accept governor name
with 15 characters, but now store_current_governor() rejects
governor name with 15 characters as it returns -EINVAL if count
equals CPUIDLE_NAME_LEN.

Refactor the code to accept such case and simplify the code.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo 3f9f8daad3 cpuidle: sysfs: Fix the overlap for showing available governors
When showing the available governors, it's "%s " in scnprintf(),
not "%s", so if the governor name has 15 characters, it will
overlap with the later one, fix it by adding one more for the
size.

While we are at it, fix the minor coding style issue and remove
the "/sizeof(char)" since sizeof(char) always equals 1.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Daniel Lezcano fc7a3d9e9c thermal: cpuidle: Register cpuidle cooling device
The cpuidle driver can be used as a cooling device by injecting idle
cycles.

When the property is set, register the cpuidle driver with the idle
state node pointer as a cooling device. The thermal framework will do
the association automatically with the thermal zone via the
cooling-device defined in the device tree cooling-maps section.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200429103644.5492-4-daniel.lezcano@linaro.org
2020-05-19 12:58:07 +02:00
Ulf Hansson 8b7ce5e490 cpuidle: psci: Fixup execution order when entering a domain idle state
Moving forward, platforms are going to need to execute specific "last-man"
operations before a domain idle state can be entered. In one way or the
other, these operations needs to be triggered while walking the
hierarchical topology via runtime PM and genpd, as it's at that point the
last-man becomes known.

Moreover, executing last-man operations needs to be done after the CPU PM
notifications are sent through cpu_pm_enter(), as otherwise it's likely
that some notifications would fail. Therefore, let's re-order the sequence
in psci_enter_domain_idle_state(), so cpu_pm_enter() gets called prior
pm_runtime_put_sync().

Fixes: ce85aef570 ("cpuidle: psci: Manage runtime PM in the idle path")
Reported-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-15 18:37:36 +02:00
Dmitry Osipenko fafd62e768 cpuidle: tegra: Support CPU cluster power-down state on Tegra30
The new Tegra CPU Idle driver now has a unified code path for the coupled
CC6 (LP2) state, this allows to enable the deepest idling state on Tegra30
SoC where the whole CPU cluster is power-gated.

Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06 18:42:55 +02:00
Gautham R. Shenoy c4019198cf powerpc/idle: Store PURR snapshot in a per-cpu global variable
Currently when CPU goes idle, we take a snapshot of PURR via
pseries_idle_prolog() which is used at the CPU idle exit to compute
the idle PURR cycles via the function pseries_idle_epilog().  Thus,
the value of idle PURR cycle thus read before pseries_idle_prolog() and
after pseries_idle_epilog() is always correct.

However, if we were to read the idle PURR cycles from an interrupt
context between pseries_idle_prolog() and pseries_idle_epilog() (this
will be done in a future patch), then, the value of the idle PURR thus
read will not include the cycles spent in the most recent idle period.
Thus, in that interrupt context, we will need access to the snapshot
of the PURR before going idle, in order to compute the idle PURR
cycles for the latest idle duration.

In this patch, we save the snapshot of PURR in pseries_idle_prolog()
in a per-cpu variable, instead of on the stack, so that it can be
accessed from an interrupt context.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-3-git-send-email-ego@linux.vnet.ibm.com
2020-04-30 12:35:26 +10:00
Gautham R. Shenoy e4a884cc28 powerpc: Move idle_loop_prolog()/epilog() functions to header file
Currently prior to entering an idle state on a Linux Guest, the
pseries cpuidle driver implement an idle_loop_prolog() and
idle_loop_epilog() functions which ensure that idle_purr is correctly
computed, and the hypervisor is informed that the CPU cycles have been
donated.

These prolog and epilog functions are also required in the default
idle call, i.e pseries_lpar_idle(). Hence move these accessor
functions to a common header file and call them from
pseries_lpar_idle(). Since the existing header files such as
asm/processor.h have enough clutter, create a new header file
asm/idle.h. Finally rename idle_loop_prolog() and idle_loop_epilog()
to pseries_idle_prolog() and pseries_idle_epilog() as they are only
relavent for on pseries guests.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-2-git-send-email-ego@linux.vnet.ibm.com
2020-04-30 12:35:26 +10:00
Hanjun Guo eba933ceeb cpuidle: sysfs: Minor coding style corrections
Fix two minor coding style issues.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-29 13:33:24 +02:00
Hanjun Guo 2f516e7cbe cpuidle: sysfs: Remove the unused define_one_r(o/w) macros
The define_one_ro and define_one_rw macros are not used,
remove it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-29 13:33:24 +02:00
Rafael J. Wysocki a31434bcd4 Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle-haltpoll: Fix small typo
2020-04-10 11:32:22 +02:00
Yihao Wu 4902f7fcb3 cpuidle-haltpoll: Fix small typo
Fix a spelling typo in cpuidle-haltpoll.c.

Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 14:35:45 +02:00
Linus Torvalds 0e8fb69f28 ARM: SoC updates
The code changes are mostly for 32-bit platforms and include:
 
 - Lots of updates for the Nvidia Tegra platform, including
   cpuidle, pmc, and dt-binding changes
 
 - Microchip at91 power management updates for the recently added
   sam9x60 SoC
 
 - Treewide setup_irq deprecation by afzal mohammed
 
 - STMicroelectronics stm32 gains earlycon support
 
 - Renesas platforms with Cortex-A9 can now use the global timer
 
 - Some TI OMAP2+ platforms gain cpuidle support
 
 - Various cleanups for the i.MX6 and Orion platforms, as well as
   Kconfig files across all platforms
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaLsACgkQmmx57+YA
 GNkg/Q/9EmLGT/bznqi6P/8V75qPY6j4swife5HlI43EdCEyN+iME1w1rFfrNilf
 A/QyXzxhYgUZoyIt7K4qjWc8fPNlJZ8X10UqeEftQFxi82cmX2+OaT2fy6OdHVRJ
 SAGb1pw7463TQ6LKA7LC7rztFjahsjnE/9szlgXQT4v5OzayGyxd3OKy2Q1zASEi
 rwN+85Lh+xJvWhhenPKVvs2Dei+up8Y9uyPfJkj2QudCB+zx5k5stkk4EiQLBd1W
 SHzhijbSU3MrAUz2Cnp9Qa+86DdGPvFPfpzQy3pSYU9nNrC0aKpS8YmHT99SIWVN
 6R1YJF7Htmui5I9+O0baejJMEqvzGUysqe+rQdCofD7ooVKWU7WKYj5HxZxyBCEN
 dvlN3KRmS6l5KLsZARSxuBUw2MPTgjsxczZ84NKMLj8czw6yXyrePZ1RWiEZ4HIu
 4GiFNLYSMmAynD/dLuC9USDsjlPsQKnQ3e8hDf3a6oK5OHUIkr3uvguhqWa5WJsi
 cy2DUeWJkXgJDhlxcfr8MiPpPJRo3N/8O8PYci8dkdDFRs32j/5Qf22vywDdUHaZ
 I9Pl+VOGOSGiqRc9gmay6DNXpJusfuv72omrz4rL4kGMahpk0LeV5w+a9TdrkreY
 sLM67wtshOjOVMc/ebQ5Q8RR17Go+MFK+Co9Yc1ybbQ6lkSzeuY=
 =UTk1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...
2020-04-03 15:02:35 -07:00
Rafael J. Wysocki ada0629bd3 Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'
* pm-core:
  PM: runtime: Add pm_runtime_get_if_active()

* pm-sleep:
  PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
  PM / hibernate: Remove unnecessary compat ioctl overrides
  PM: hibernate: fix docs for ioctls that return loff_t via pointer
  PM: sleep: wakeup: Use built-in RCU list checking
  PM: sleep: core: Use built-in RCU list checking

* pm-acpi:
  ACPI: PM: s2idle: Refine active GPEs check
  ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
  ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()

* pm-domains:
  cpuidle: psci: Split psci_dt_cpu_init_idle()
  PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30 14:46:58 +02:00
Rafael J. Wysocki be4f65405a Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
  intel_idle: Update copyright notice, known limitations and version
  intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16)
  intel_idle: Clean up kerneldoc comments for multiple functions
  intel_idle: Reorder declarations of static variables
  intel_idle: Annotate init time data structures
  intel_idle: Add __initdata annotations to init time variables
  intel_idle: Relocate definitions of cpuidle callbacks
  intel_idle: Clean up definitions of cpuidle callbacks
  intel_idle: Simplify LAPIC timer reliability checks
2020-03-30 14:46:17 +02:00
Ulf Hansson 7fbee48ea0 cpuidle: psci: Split psci_dt_cpu_init_idle()
To make the code a bit more readable, let's move the OSI specific
initialization out of the psci_dt_cpu_init_idle() and into a separate
function.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 12:03:05 +01:00
Maciej S. Szmigiero dd52551fb7 cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
Before commit 1328edca4a ("cpuidle-haltpoll: Enable kvm guest polling
when dedicated physical CPUs are available") the cpuidle-haltpoll driver
could also be used in scenarios when the host does not advertise the
KVM_HINTS_REALTIME hint.

While the behavior introduced by the aforementioned commit makes sense as
the default there are cases where the old behavior is desired, for example,
when other kernel changes triggered by presence by this hint are unwanted,
for some workloads where the latency benefit from polling overweights the
loss from idle CPU capacity that otherwise would be available, or just when
running under older Qemu versions that lack this hint.

Let's provide a typical "force" module parameter that allows restoring the
old behavior.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:39:07 +01:00
Dmitry Osipenko 382ac8e22b cpuidle: tegra: Disable CC6 state if LP2 unavailable
LP2 suspending could be unavailable, for example if it is disabled in a
device-tree. CC6 cpuidle state won't work in that case.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:32:01 +01:00
Dmitry Osipenko 14e086baca cpuidle: tegra: Squash Tegra114 driver into the common driver
Tegra20/30/114/124 SoCs have common idling states, thus there is no much
point in having separate drivers for a similar hardware. This patch moves
Tegra114/124 arch/ drivers into the common driver without any functional
changes. The CC6 state is kept disabled on Tegra114/124 because the core
Tegra PM code needs some more work in order to support that state.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:32:01 +01:00
Dmitry Osipenko 19461a499c cpuidle: tegra: Squash Tegra30 driver into the common driver
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus
share the same code paths, there is no point in having separate drivers
for a similar hardware. This patch merely moves functionality of the old
driver into the new, although the CC6 state is kept disabled for now since
old driver had a rudimentary support for this state (allowing to enter
into CC6 only when secondary CPUs are put offline), while new driver can
provide a full-featured support. The new feature will be enabled by
another patch.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:32:01 +01:00
Dmitry Osipenko 860fbde438 cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:31:58 +01:00
Rafael J. Wysocki f60ccc3558 cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request()
Call cpu_latency_qos_limit() instead of pm_qos_request(), because the
latter is going to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2020-02-13 11:26:57 +01:00
Rafael J. Wysocki 3a4a004222 PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY notifier chain
Notice that pm_qos_remove_notifier() is not used at all and the only
caller of pm_qos_add_notifier() is the cpuidle core, which only needs
the PM_QOS_CPU_DMA_LATENCY notifier to invoke wake_up_all_idle_cpus()
upon changes of the PM_QOS_CPU_DMA_LATENCY target value.

First, to ensure that wake_up_all_idle_cpus() will be called
whenever the PM_QOS_CPU_DMA_LATENCY target value changes, modify the
pm_qos_add/update/remove_request() family of functions to check if
the effective constraint for the PM_QOS_CPU_DMA_LATENCY has changed
and call wake_up_all_idle_cpus() directly in that case.

Next, drop the PM_QOS_CPU_DMA_LATENCY notifier from cpuidle as it is
not necessary any more.

Finally, drop both pm_qos_add_notifier() and pm_qos_remove_notifier(),
as they have no callers now, along with cpu_dma_lat_notifier which is
only used by them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2020-02-13 11:26:27 +01:00
Linus Torvalds eab3540562 ARM: SoC-related driver updates
Various driver updates for platforms:
 
  - Nvidia: Fuse support for Tegra194, continued memory controller pieces
    for Tegra30
 
  - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
 
  - NXP/FSL: i.MX8MP SoC driver pieces
 
  - TI Keystone: ring accelerator driver
 
  - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
 
  - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
    communication for power management
 
  - Overall support patch set for cpuidle on more complex hierarchies
    (PSCI-based)
 
 + Misc cleanups, refactorings of Marvell, TI, other platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4+lTYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nQcQAJm91+6hZbmMjlBySGS7ISjYvOcrI/hMgiOl
 uhhEP0Dcylvf9A9x3wcIbLwixe+2pvie9DQh2u5F80ShYimidtFi/2xCfuTb9fKu
 sxxKjrXWyVKhkpW0z+tedY08ftVhkwwcyD4m2C7uVl6AwTP7c367vFeU7XjF2APn
 drfgmgbjm8U3XbSyAqv+k6z6tyqaCnFM7vbPupSKHgHJ3mfByxOa+XyBN2RdgBbs
 0KrVfbXGv80zFIFrMPwaWG7G52bu7K68nVdgy44MpKdRZ6QTjhnR+kerFxHsYgV4
 bM55Fya52nTCSTGdKaQakDtKwbAUdCDTSkxgOHGcQoyFi0R/VaEUJtcysnvLbI6c
 +n/yFIzGyEdXcvIzfv2SoDYhogw19I6RR/M9K5Ni29eazkDVYx2z3rI+2QYeqCiF
 u7cq52gW6JLP0SI/9kuUrRFiR8v19Ixap7qokAxgqQwYB3NzT8a7WsYPkzdpDZGQ
 ETSDFMyBWT6UvBe/HWkQluBabbet53rG8BF0OHFrQuMK0u/ieKgSGuTB9XN2djEW
 PHMOMz2vhi+8XTfpkskhF2tTxlA/k4R6QwCdIMpIkMRVnVQCh1XdPr3Fi2NrgB+S
 kIXHD4vV6zLYh04zHyKewSPHAXWgraFpg2qKnvL5+KWMTnW6QH+RNjOt9xKDNXOd
 +iDXpOad
 =ONtb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...
2020-02-08 14:04:19 -08:00
Rafael J. Wysocki e6cf623ba3 Merge branch 'intel_idle+acpi'
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.

* intel_idle+acpi:
  Documentation: admin-guide: PM: Add intel_idle document
  intel_idle: Use ACPI _CST on server systems
  intel_idle: Add module parameter to prevent ACPI _CST from being used
  intel_idle: Allow ACPI _CST to be used for selected known processors
  cpuidle: Allow idle states to be disabled by default
  intel_idle: Use ACPI _CST for processor models without C-state tables
  intel_idle: Refactor intel_idle_cpuidle_driver_init()
  ACPI: processor: Export acpi_processor_evaluate_cst()
  ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
  ACPI: processor: Clean up acpi_processor_evaluate_cst()
  ACPI: processor: Introduce acpi_processor_evaluate_cst()
  ACPI: processor: Export function to claim _CST control
2020-01-23 00:35:50 +01:00
Benjamin Gaignard cefb9409ff cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
Fix cpuidle_find_deepest_state() kernel documentation to avoid
warnings when compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-23 00:33:31 +01:00
Benjamin Gaignard a09da3fbc1 cpuidle: sysfs: fix warnings when compiling with W=1
Fix kernel documentation comments to remove warnings when
compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-23 00:31:31 +01:00
Benjamin Gaignard 32014c86d4 cpuidle: coupled: fix warnings when compiling with W=1
Fix warnings that show up when compiling with W=1

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-23 00:30:28 +01:00
Rafael J. Wysocki f7d50a1534 Merge back cpuidle material for v5.6. 2020-01-17 00:18:31 +01:00
Krzysztof Kozlowski 53eb82b097 cpuidle: arm: Enable compile testing for some of drivers
Some of cpuidle drivers for ARMv7 can be compile tested on this
architecture because they do not depend on mach-specific bits.  Enable
compile testing for big.LITTLE, Kirkwood, Zynq, AT91, Exynos and mvebu
cpuidle drivers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-14 23:48:46 +01:00
Ikjoon Jang 57388a2ccb cpuidle: teo: Fix intervals[] array indexing bug
Fix a simple bug in rotating array index.

Fixes: b26bf6ab71 ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13 11:14:58 +01:00
Rafael J. Wysocki 577a2f41f4 cpuidle: Drop unused cpuidle_driver_ref/unref() functions
The cpuidle_driver_ref() and cpuidle_driver_unref() functions are not
used and the refcnt field in struct cpuidle_driver operated by them
is not updated anywhere else (so it is permanently equal to 0), so
drop both of them along with refcnt.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2020-01-09 16:47:22 +01:00
Ulf Hansson a65a397f24 cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.

To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.

The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.

Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:52:57 +01:00
Ulf Hansson 9c6ceecb65 cpuidle: psci: Support CPU hotplug for the hierarchical model
When the hierarchical CPU topology is used and when a CPU is put offline,
that CPU prevents its PM domain from being powered off, which is because
genpd observes the corresponding attached device as being active from a
runtime PM point of view. Furthermore, any potential master PM domains are
also prevented from being powered off.

To address this limitation, let's add add a new CPU hotplug state
(CPUHP_AP_CPU_PM_STARTING) and register up/down callbacks for it, which
allows us to deal with runtime PM accordingly.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:52:18 +01:00
Ulf Hansson ce85aef570 cpuidle: psci: Manage runtime PM in the idle path
In case we have succeeded to attach a CPU to its PM domain, let's deploy
runtime PM support for the corresponding attached device, to allow the CPU
to be powered-managed accordingly.

The triggering point for when runtime PM reference counting should be done,
has been selected to the deepest idle state for the CPU. However, from the
hierarchical point view, there may be good reasons to do runtime PM
reference counting even on shallower idle states, but at this point this
isn't supported, mainly due to limitations set by the generic PM domain.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:52:06 +01:00
Ulf Hansson a0cf319460 cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
The per CPU variable psci_power_state, contains an array of fixed values,
which reflects the corresponding arm,psci-suspend-param parsed from DT, for
each of the available CPU idle states.

This isn't sufficient when using the hierarchical CPU topology in DT, in
combination with having PSCI OS initiated (OSI) mode enabled. More
precisely, in OSI mode, Linux is responsible of telling the PSCI FW what
idle state the cluster (a group of CPUs) should enter, while in PSCI
Platform Coordinated (PC) mode, each CPU independently votes for an idle
state of the cluster.

For this reason, introduce a per CPU variable called domain_state and
implement two helper functions to read/write its value. Then let the
domain_state take precedence over the regular selected state, when entering
and idle state.

To avoid executing the above OSI specific code in the ->enter() callback,
while operating in the default PSCI Platform Coordinated mode, let's also
add a new enter-function and use it for OSI.

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:34 +01:00
Ulf Hansson 8554951a4d cpuidle: psci: Attach CPU devices to their PM domains
In order to enable a CPU to be power managed through its PM domain, let's
try to attach it by calling psci_dt_attach_cpu() during the cpuidle
initialization.

psci_dt_attach_cpu() returns a pointer to the attached struct device, which
later should be used for runtime PM, hence we need to store it somewhere.
Rather than adding yet another per CPU variable, let's create a per CPU
struct to collect the relevant per CPU variables.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:28 +01:00
Ulf Hansson a5e0454cf3 cpuidle: psci: Add a helper to attach a CPU to its PM domain
Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a
CPU number as an in-parameter and tries to attach the CPU's struct device
to its corresponding PM domain.

Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to
specify "psci" as the "name" of the PM domain to attach to. Additionally,
let's also prepare the attached device to be power managed via runtime PM.

Note that, the implementation of the new helper function is in a new
separate c-file, which may seems a bit too much at this point. However,
subsequent changes that implements the remaining part of the PM domain
support for cpuidle-psci, helps to justify this split.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:24 +01:00
Ulf Hansson f08cfbfa4f cpuidle: psci: Support hierarchical CPU idle states
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:19 +01:00
Ulf Hansson 1595e4b09b cpuidle: psci: Simplify OF parsing of CPU idle state nodes
Iterating through the idle state nodes in DT, to find out the number of
states that needs to be allocated is unnecessary, as it has already been
done from dt_init_idle_driver(). Therefore, drop the iteration and use the
number we already have at hand.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:15 +01:00
Lina Iyer 778f173eb4 cpuidle: dt: Support hierarchical CPU idle states
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().

Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:50:08 +01:00
Sudeep Holla 4386aa866d cpuidle: psci: Align psci_power_state count with idle state count
Instead of allocating 'n-1' states in psci_power_state to manage 'n'
idle states which include "ARM WFI" state, it would be simpler to have
1:1 mapping between psci_power_state and cpuidle driver states.

ARM WFI state(i.e. idx == 0) is handled specially in the generic macro
CPU_PM_CPU_IDLE_ENTER_PARAM and hence state[-1] is not possible. However
for sake of code readability, it is better to have 1:1 mapping and not
use [idx - 1] to access psci_power_state corresponding to driver cpuidle
state for idx.

psci_power_state[0] is default initialised to 0 and is never accessed
while entering WFI state.

Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:42:13 +01:00