Commit Graph

22200 Commits

Author SHA1 Message Date
Alexander Potapenko be7635e728 arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections
KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>.  Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko 36324a990c oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space
When oom_reaper manages to unmap all the eligible vmas there shouldn't
be much of the freable memory held by the oom victim left anymore so it
makes sense to clear the TIF_MEMDIE flag for the victim and allow the
OOM killer to select another task.

The lack of TIF_MEMDIE also means that the victim cannot access memory
reserves anymore but that shouldn't be a problem because it would get
the access again if it needs to allocate and hits the OOM killer again
due to the fatal_signal_pending resp.  PF_EXITING check.  We can safely
hide the task from the OOM killer because it is clearly not a good
candidate anymore as everyhing reclaimable has been torn down already.

This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE
and thus hold off further global OOM killer actions granted the oom
reaper is able to take mmap_sem for the associated mm struct.  This is
not guaranteed now but further steps should make sure that mmap_sem for
write should be blocked killable which will help to reduce such a lock
contention.  This is not done by this patch.

Note that exit_oom_victim might be called on a remote task from
__oom_reap_task now so we have to check and clear the flag atomically
otherwise we might race and underflow oom_victims or wake up waiters too
early.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Andrew Morton 69b27baf00 sched: add schedule_timeout_idle()
This will be needed in the patch "mm, oom: introduce oom reaper".

Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Linus Torvalds 3d66c6ba3f Power management and ACPI material for v4.6-rc1, part 2
- Fix for an intel_pstate driver issue related to the handling of
    MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki).
 
  - cpufreq core cleanups related to starting governors and frequency
    synchronization during resume from system suspend and a locking
    fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).
 
  - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
    Michael Neuling, Richard Cochran, Shilpasri Bhat).
 
  - intel_idle driver update preventing some Skylake-H systems
    from hanging during initialization by disabling deep C-states
    mishandled by the platform in the problematic configurations (Len
    Brown).
 
  - Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman
    Chandramouli).
 
  - cpuidle menu governor updates to make it always honor PM QoS
    latency constraints (and prevent C1 from being used as the
    fallback C-state on x86 when they are set below its exit latency)
    and to restore the previous behavior to fall back to C1 if the next
    timer event is set far enough in the future that was changed in 4.4
    which led to an energy consumption regression (Rik van Riel, Rafael
    Wysocki).
 
  - New device ID for a future AMD UART controller in the ACPI driver
    for AMD SoCs (Wang Hongcheng).
 
  - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
    scaling (AVS) driver (David Wu).
 
  - ACPI PCI resources management fix for the handling of IO space
    resources on architectures where the IO space is memory mapped
    (IA64 and ARM64) broken by the introduction of common ACPI
    resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).
 
  - Fix for the ACPI backend of the generic device properties API
    to make it parse non-device (data node only) children of an
    ACPI device correctly (Irina Tirdea).
 
  - Fixes for the handling of global suspend flags (introduced in 4.4)
    during hibernation and resume from it (Lukas Wunner).
 
  - Support for obtaining configuration information from Device Trees
    in the PM clocks framework (Jon Hunter).
 
  - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
    King, Geert Uytterhoeven).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJW9JaRAAoJEILEb/54YlRx/GAQAJujANWilWHZYm24a9JDcIE9
 rsNZIC/FdeBVilPtRTZQnig/Pj32Z4Jm7IZ/DLOq0Deu1YK/9uv3y59M3BcX6WyL
 H5VR80L8geUJZ7RRk0WfM5D4X82ovzwpE/kWt2Z7HDuvJSCBmFBZOvNrXbaRncKD
 jIvat/p6uCuxt5c08+ebnBLQ6tOs8wLTWiCx3fO128GIrGRGN2xFV6hzRWVGnJ4g
 WXGAR+AdLxRMZz4PPmqdTfRj4TNSR071GjKyaeKfZUjQGAsf5O9A77JFjeNVomDx
 g1K37Byid2bTByzVavlEXPJZ7eKb5dAhlo7IJ9HAcOAXChLqH2Czjrpd+1XjR9MF
 SV/78rCnF8eet83QYLbGV/Mzf7gbJP2Xp6wiaM22VAPpGe+sYfphJoQka9XRTfId
 OgAjyYMYdWAKo5DhxVNI8WyN0W5dsoBFPxnaUFhHSGDCIJH7Ksy20m6y3plG2Bxf
 ahoiQhmd9ohjtB5JbRnf4MY0hjekp8Srdf+DoNKsk/+JscIyROpYY3msQ3smUKo+
 f628MC/wAosMpSV+l+KOYkbjCbtB49IabWtZ//NVD9hYB3E1f6aTN59yFbWB+1rp
 L7Y8iaxzSkyJy/yYVuBal3rSk356+BvvoXBlLXmBsyu1TMlcDjALIYztSiTVT5MB
 RZBhgNwdkxNCYJfU3ex+
 =hUVj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "The second batch of power management and ACPI updates for v4.6.

  Included are fixups on top of the previous PM/ACPI pull request and
  other material that didn't make into it but still should go into 4.6.

  Among other things, there's a fix for an intel_pstate driver issue
  uncovered by recent cpufreq changes, a workaround for a boot hang on
  Skylake-H related to the handling of deep C-states by the platform and
  a PCI/ACPI fix for the handling of IO port resources on non-x86
  architectures plus some new device IDs and similar.

  Specifics:

   - Fix for an intel_pstate driver issue related to the handling of MSR
     updates uncovered by the recent cpufreq rework (Rafael Wysocki).

   - cpufreq core cleanups related to starting governors and frequency
     synchronization during resume from system suspend and a locking fix
     for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).

   - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
     Michael Neuling, Richard Cochran, Shilpasri Bhat).

   - intel_idle driver update preventing some Skylake-H systems from
     hanging during initialization by disabling deep C-states mishandled
     by the platform in the problematic configurations (Len Brown).

   - Intel Xeon Phi Processor x200 support for intel_idle
     (Dasaratharaman Chandramouli).

   - cpuidle menu governor updates to make it always honor PM QoS
     latency constraints (and prevent C1 from being used as the fallback
     C-state on x86 when they are set below its exit latency) and to
     restore the previous behavior to fall back to C1 if the next timer
     event is set far enough in the future that was changed in 4.4 which
     led to an energy consumption regression (Rik van Riel, Rafael
     Wysocki).

   - New device ID for a future AMD UART controller in the ACPI driver
     for AMD SoCs (Wang Hongcheng).

   - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
     scaling (AVS) driver (David Wu).

   - ACPI PCI resources management fix for the handling of IO space
     resources on architectures where the IO space is memory mapped
     (IA64 and ARM64) broken by the introduction of common ACPI
     resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).

   - Fix for the ACPI backend of the generic device properties API to
     make it parse non-device (data node only) children of an ACPI
     device correctly (Irina Tirdea).

   - Fixes for the handling of global suspend flags (introduced in 4.4)
     during hibernation and resume from it (Lukas Wunner).

   - Support for obtaining configuration information from Device Trees
     in the PM clocks framework (Jon Hunter).

   - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
     King, Geert Uytterhoeven)"

* tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399
  intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
  intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate
  cpufreq: governor: Always schedule work on the CPU running update
  cpufreq: Always update current frequency before startig governor
  cpufreq: Introduce cpufreq_update_current_freq()
  cpufreq: Introduce cpufreq_start_governor()
  cpufreq: powernv: Add sysfs attributes to show throttle stats
  cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
  PCI: ACPI: IA64: fix IO port generic range check
  ACPI / util: cast data to u64 before shifting to fix sign extension
  cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
  cpuidle: menu: Fall back to polling if next timer event is near
  cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
  intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
  cpufreq: Make cpufreq_quick_get() safe to call
  ACPI / property: fix data node parsing in acpi_get_next_subnode()
  ACPI / APD: Add device HID for future AMD UART controller
  ...
2016-03-24 22:59:58 -07:00
Rafael J. Wysocki 3513ac743d Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep'
* pm-avs:
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399

* pm-clk:
  PM / clk: Add support for obtaining clocks from device-tree

* pm-devfreq:
  PM / devfreq: Spelling s/frequnecy/frequency/

* pm-sleep:
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate
2016-03-25 00:58:18 +01:00
Linus Torvalds e46b4e2b46 Nothing major this round. Mostly small clean ups and fixes.
Some visible changes:
 
  A new flag was added to distinguish traces done in NMI context.
 
  Preempt tracer now shows functions where preemption is disabled but
  interrupts are still enabled.
 
 Other notes:
 
  Updates were done to function tracing to allow better performance
  with perf.
 
  Infrastructure code has been added to allow for a new histogram
  feature for recording live trace event histograms that can be
  configured by simple user commands. The feature itself was just
  finished, but needs a round in linux-next before being pulled.
  This only includes some infrastructure changes that will be needed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW8/WPAAoJEKKk/i67LK/8wrAH/j2gU9ZfjVxTu8068TBGWRJP
 yvvzq0cK5evB3dsVuUmKKRfU52nSv4J1WcFF569X0RulSLylR0dHlcxFJMn4kkgR
 bm0AHRrqOf87ub3VimcpG146iVQij37l5A0SRoFbvSPLQx1KUW18v99x41Ji8dv6
 oWXRc6/YhdzEE7l0nUsVjmScQ4b2emsems3cxZzXOY+nRJsiim6i+VaDeatdyey1
 csLVqtRCs+x62TVtxG3+GhcLdRoPRbnHAGzrKDFIn1SrQaRXCc54wN5d2hWxjgNI
 1laOwaj070lnJiWfBLIP/K+lx+VKRx5/O0rKZX35foLUTqJJKSyjAbKXuMCcSAM=
 =2h2K
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Nothing major this round.  Mostly small clean ups and fixes.

  Some visible changes:

   - A new flag was added to distinguish traces done in NMI context.

   - Preempt tracer now shows functions where preemption is disabled but
     interrupts are still enabled.

  Other notes:

   - Updates were done to function tracing to allow better performance
     with perf.

   - Infrastructure code has been added to allow for a new histogram
     feature for recording live trace event histograms that can be
     configured by simple user commands.  The feature itself was just
     finished, but needs a round in linux-next before being pulled.

     This only includes some infrastructure changes that will be needed"

* tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (22 commits)
  tracing: Record and show NMI state
  tracing: Fix trace_printk() to print when not using bprintk()
  tracing: Remove redundant reset per-CPU buff in irqsoff tracer
  x86: ftrace: Fix the misleading comment for arch/x86/kernel/ftrace.c
  tracing: Fix crash from reading trace_pipe with sendfile
  tracing: Have preempt(irqs)off trace preempt disabled functions
  tracing: Fix return while holding a lock in register_tracer()
  ftrace: Use kasprintf() in ftrace_profile_tracefs()
  ftrace: Update dynamic ftrace calls only if necessary
  ftrace: Make ftrace_hash_rec_enable return update bool
  tracing: Fix typoes in code comment and printk in trace_nop.c
  tracing, writeback: Replace cgroup path to cgroup ino
  tracing: Use flags instead of bool in trigger structure
  tracing: Add an unreg_all() callback to trigger commands
  tracing: Add needs_rec flag to event triggers
  tracing: Add a per-event-trigger 'paused' field
  tracing: Add get_syscall_name()
  tracing: Add event record param to trigger_ops.func()
  tracing: Make event trigger functions available
  tracing: Make ftrace_event_field checking functions available
  ...
2016-03-24 10:52:25 -07:00
Linus Torvalds 3fa2fe2ce0 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "This tree contains various perf fixes on the kernel side, plus three
  hw/event-enablement late additions:

   - Intel Memory Bandwidth Monitoring events and handling
   - the AMD Accumulated Power Mechanism reporting facility
   - more IOMMU events

  ... and a final round of perf tooling updates/fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  perf llvm: Use strerror_r instead of the thread unsafe strerror one
  perf llvm: Use realpath to canonicalize paths
  perf tools: Unexport some methods unused outside strbuf.c
  perf probe: No need to use formatting strbuf method
  perf help: Use asprintf instead of adhoc equivalents
  perf tools: Remove unused perf_pathdup, xstrdup functions
  perf tools: Do not include stringify.h from the kernel sources
  tools include: Copy linux/stringify.h from the kernel
  tools lib traceevent: Remove redundant CPU output
  perf tools: Remove needless 'extern' from function prototypes
  perf tools: Simplify die() mechanism
  perf tools: Remove unused DIE_IF macro
  perf script: Remove lots of unused arguments
  perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve
  perf machine: Rename perf_event__preprocess_sample to machine__resolve
  perf tools: Add cpumode to struct perf_sample
  perf tests: Forward the perf_sample in the dwarf unwind test
  perf tools: Remove misplaced __maybe_unused
  perf list: Fix documentation of :ppp
  perf bench numa: Fix assertion for nodes bitfield
  ...
2016-03-24 10:02:14 -07:00
Linus Torvalds be53f58fa0 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a
  cputime fix and two cpuacct cleanups"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cpuacct: Simplify the cpuacct code
  sched/cpuacct: Rename parameter in cpuusage_write() for readability
  sched/fair: Add comments to explain select_idle_sibling()
  sched/fair: Fix fairness issue on migration
  sched/cgroup: Fix/cleanup cgroup teardown/init
  sched/cputime: Fix steal time accounting vs. CPU hotplug
2016-03-24 09:42:50 -07:00
Lukas Wunner 276142730c PM / sleep: Clear pm_suspend_global_flags upon hibernate
When suspending to RAM, waking up and later suspending to disk,
we gratuitously runtime resume devices after the thaw phase.
This does not occur if we always suspend to RAM or always to disk.

pm_complete_with_resume_check(), which gets called from
pci_pm_complete() among others, schedules a runtime resume
if PM_SUSPEND_FLAG_FW_RESUME is set. The flag is set during
a suspend-to-RAM cycle. It is cleared at the beginning of
the suspend-to-RAM cycle but not afterwards and it is not
cleared during a suspend-to-disk cycle at all. Fix it.

Fixes: ef25ba0476 (PM / sleep: Add flags to indicate platform firmware involvement)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-23 02:43:11 +01:00
Joe Perches a395d6a7e3 kernel/...: convert pr_warning to pr_warn
Use the more common logging method with the eventual goal of removing
pr_warning altogether.

Miscellanea:

 - Realign arguments
 - Coalesce formats
 - Add missing space between a few coalesced formats

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Brian Starkey c907e0eb43 memremap: add MEMREMAP_WC flag
Add a flag to memremap() for writecombine mappings.  Mappings satisfied
by this flag will not be cached, however writes may be delayed or
combined into more efficient bursts.  This is most suitable for buffers
written sequentially by the CPU for use by other DMA devices.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Brian Starkey cf61e2a148 memremap: don't modify flags
These patches implement a MEMREMAP_WC flag for memremap(), which can be
used to obtain writecombine mappings.  This is then used for setting up
dma_coherent_mem regions which use the DMA_MEMORY_MAP flag.

The motivation is to fix an alignment fault on arm64, and the suggestion
to implement MEMREMAP_WC for this case was made at [1].  That particular
issue is handled in patch 4, which makes sure that the appropriate
memset function is used when zeroing allocations mapped as IO memory.

This patch (of 4):

Don't modify the flags input argument to memremap(). MEMREMAP_WB is
already a special case so we can check for it directly instead of
clearing flag bits in each mapper.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Helge Deller 41b2715487 kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE
The value of __ARCH_SI_PREAMBLE_SIZE defines the size (including
padding) of the part of the struct siginfo that is before the union, and
it is then used to calculate the needed padding (SI_PAD_SIZE) to make
the size of struct siginfo equal to 128 (SI_MAX_SIZE) bytes.

Depending on the target architecture and word width it equals to either
3 or 4 times sizeof int.

Since the very beginning we had __ARCH_SI_PREAMBLE_SIZE wrong on the
parisc architecture for the 64bit kernel build.  It's even more
frustrating, because it can easily be checked at compile time if the
value was defined correctly.

This patch adds such a check for the correctness of
__ARCH_SI_PREAMBLE_SIZE in the hope that it will prevent existing and
future architectures from running into the same problem.

I refrained from replacing __ARCH_SI_PREAMBLE_SIZE by offsetof() in
copy_siginfo() in include/asm-generic/siginfo.h, because a) it doesn't
make any difference and b) it's used in the Documentation/kmemcheck.txt
example.

I ran this patch through the 0-DAY kernel test infrastructure and only
the parisc architecture triggered as expected.  That means that this
patch should be OK for all major architectures.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Dmitry Vyukov 5c9a8750a6 kernel: add kcov code coverage
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing).  Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system.  A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/).  However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.

kcov does not aim to collect as much coverage as possible.  It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g.  scheduler, locking).

Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes.  Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch).  I've
dropped the second mode for simplicity.

This patch adds the necessary support on kernel side.  The complimentary
compiler support was added in gcc revision 231296.

We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:

  https://github.com/google/syzkaller/wiki/Found-Bugs

We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation".  For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.

Why not gcov.  Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat.  A
typical coverage can be just a dozen of basic blocks (e.g.  an invalid
input).  In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M).  Cost of
kcov depends only on number of executed basic blocks/edges.  On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.

kcov exposes kernel PCs and control flow to user-space which is
insecure.  But debugfs should not be mapped as user accessible.

Based on a patch by Quentin Casasnovas.

[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Arnd Bergmann ade356b99a profile: hide unused functions when !CONFIG_PROC_FS
A couple of functions and variables in the profile implementation are
used only on SMP systems by the procfs code, but are unused if either
procfs is disabled or in uniprocessor kernels.  gcc prints a harmless
warning about the unused symbols:

  kernel/profile.c:243:13: error: 'profile_flip_buffers' defined but not used [-Werror=unused-function]
   static void profile_flip_buffers(void)
               ^
  kernel/profile.c:266:13: error: 'profile_discard_flip_buffers' defined but not used [-Werror=unused-function]
   static void profile_discard_flip_buffers(void)
               ^
  kernel/profile.c:330:12: error: 'profile_cpu_callback' defined but not used [-Werror=unused-function]
   static int profile_cpu_callback(struct notifier_block *info,
              ^

This adds further #ifdef to the file, to annotate exactly in which cases
they are used.  I have done several thousand ARM randconfig kernels with
this patch applied and no longer get any warnings in this file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Hidehiro Kawai ebc41f20d7 panic: change nmi_panic from macro to function
Commit 1717f2096b ("panic, x86: Fix re-entrance problem due to panic
on NMI") and commit 58c5661f21 ("panic, x86: Allow CPUs to save
registers even if looping in NMI context") introduced nmi_panic() which
prevents concurrent/recursive execution of panic().  It also saves
registers for the crash dump on x86.

However, there are some cases where NMI handlers still use panic().
This patch set partially replaces them with nmi_panic() in those cases.

Even this patchset is applied, some NMI or similar handlers (e.g.  MCE
handler) continue to use panic().  This is because I can't test them
well and actual problems won't happen.  For example, the possibility
that normal panic and panic on MCE happen simultaneously is very low.

This patch (of 3):

Convert nmi_panic() to a proper function and export it instead of
exporting internal implementation details to modules, for obvious
reasons.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Jann Horn 378c6520e7 fs/coredump: prevent fsuid=0 dumps into user-controlled directories
This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

 - The fs.suid_dumpable sysctl is set to 2.
 - The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
 - Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Oleg Nesterov 1333ab0315 ptrace: change __ptrace_unlink() to clear ->ptrace under ->siglock
This test-case (simplified version of generated by syzkaller)

	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>

	void test(void)
	{
		for (;;) {
			if (fork()) {
				wait(NULL);
				continue;
			}

			ptrace(PTRACE_SEIZE, getppid(), 0, 0);
			ptrace(PTRACE_INTERRUPT, getppid(), 0, 0);
			_exit(0);
		}
	}

	int main(void)
	{
		int np;

		for (np = 0; np < 8; ++np)
			if (!fork())
				test();

		while (wait(NULL) > 0)
			;
		return 0;
	}

triggers the 2nd WARN_ON_ONCE(!signr) warning in do_jobctl_trap().  The
problem is that __ptrace_unlink() clears task->jobctl under siglock but
task->ptrace is cleared without this lock held; this fools the "else"
branch which assumes that !PT_SEIZED means PT_PTRACED.

Note also that most of other PTRACE_SEIZE checks can race with detach
from the exiting tracer too.  Say, the callers of ptrace_trap_notify()
assume that SEIZED can't go away after it was checked.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Andy Lutomirski efbc0fbf34 auditsc: for seccomp events, log syscall compat state using in_compat_syscall
Except on SPARC, this is what the code always did.  SPARC compat seccomp
was buggy, although the impact of the bug was limited because SPARC
32-bit and 64-bit syscall numbers are the same.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Andy Lutomirski 5c465217a9 ptrace: in PEEK_SIGINFO, check syscall bitness, not task bitness
Users of the 32-bit ptrace() ABI expect the full 32-bit ABI.  siginfo
translation should check ptrace() ABI, not caller task ABI.

This is an ABI change on SPARC.  Let's hope that no one relied on the
old buggy ABI.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Andy Lutomirski 5c38065e02 seccomp: check in_compat_syscall, not is_compat_task, in strict mode
Seccomp wants to know the syscall bitness, not the caller task bitness,
when it selects the syscall whitelist.

As far as I know, this makes no difference on any architecture, so it's
not a security problem.  (It generates identical code everywhere except
sparc, and, on sparc, the syscall numbering is the same for both ABIs.)

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Tetsuo Handa b4aa14a63c kernel/hung_task.c: use timeout diff when timeout is updated
When new timeout is written to /proc/sys/kernel/hung_task_timeout_secs,
khungtaskd is interrupted and again sleeps for full timeout duration.

This means that hang task will not be checked if new timeout is written
periodically within old timeout duration and/or checking of hang task
will be delayed for up to previous timeout duration.  Fix this by
remembering last time khungtaskd checked hang task.

This change will allow other watchdog tasks (if any) to share khungtaskd
by sleeping for minimal timeout diff of all watchdog tasks.  Doing more
watchdog tasks from khungtaskd will reduce the possibility of printk()
collisions by multiple watchdog threads.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Peter Zijlstra 7e6867bf83 tracing: Record and show NMI state
The latency tracer format has a nice column to indicate IRQ state, but
this is not able to tell us about NMI state.

When tracing perf interrupt handlers (which often run in NMI context)
it is very useful to see how the events nest.

Link: http://lkml.kernel.org/r/20160318153022.105068893@infradead.org

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-22 18:04:10 -04:00
Steven Rostedt (Red Hat) 3debb0a9dd tracing: Fix trace_printk() to print when not using bprintk()
The trace_printk() code will allocate extra buffers if the compile detects
that a trace_printk() is used. To do this, the format of the trace_printk()
is saved to the __trace_printk_fmt section, and if that section is bigger
than zero, the buffers are allocated (along with a message that this has
happened).

If trace_printk() uses a format that is not a constant, and thus something
not guaranteed to be around when the print happens, the compiler optimizes
the fmt out, as it is not used, and the __trace_printk_fmt section is not
filled. This means the kernel will not allocate the special buffers needed
for the trace_printk() and the trace_printk() will not write anything to the
tracing buffer.

Adding a "__used" to the variable in the __trace_printk_fmt section will
keep it around, even though it is set to NULL. This will keep the string
from being printed in the debugfs/tracing/printk_formats section as it is
not needed.

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 07d777fe8c "tracing: Add percpu buffers for trace_printk()"
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-22 18:02:40 -04:00
Linus Torvalds 5518f66b5a Merge branch 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup namespace support from Tejun Heo:
 "These are changes to implement namespace support for cgroup which has
  been pending for quite some time now.  It is very straight-forward and
  only affects what part of cgroup hierarchies are visible.

  After unsharing, mounting a cgroup fs will be scoped to the cgroups
  the task belonged to at the time of unsharing and the cgroup paths
  exposed to userland would be adjusted accordingly"

* 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix and restructure error handling in copy_cgroup_ns()
  cgroup: fix alloc_cgroup_ns() error handling in copy_cgroup_ns()
  Add FS_USERNS_FLAG to cgroup fs
  cgroup: Add documentation for cgroup namespaces
  cgroup: mount cgroupns-root when inside non-init cgroupns
  kernfs: define kernfs_node_dentry
  cgroup: cgroup namespace setns support
  cgroup: introduce cgroup namespaces
  sched: new clone flag CLONE_NEWCGROUP for cgroup namespace
  kernfs: Add API to generate relative kernfs path
2016-03-21 10:05:13 -07:00
Zhao Lei 73e6aafd9e sched/cpuacct: Simplify the cpuacct code
- Use for() instead of while() loop in some functions
   to make the code simpler.

 - Use this_cpu_ptr() instead of per_cpu_ptr() to make the code
   cleaner and a bit faster.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d8a7ef9592f55224630cb26dea239f05b6398a4e.1458187654.git.zhaolei@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 11:00:28 +01:00
Dongsheng Yang 1a736b77a3 sched/cpuacct: Rename parameter in cpuusage_write() for readability
The name of the 'reset' parameter to cpuusage_write() is quite confusing,
because the only valid value we allow is '0', so !reset is actually the
case that resets ...

Rename it to 'val' and explain it in a comment that we only allow 0.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cgroups@vger.kernel.org
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1450696483-2864-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 10:59:29 +01:00
Matt Fleming d4335581dc sched/fair: Add comments to explain select_idle_sibling()
It's not entirely obvious how the main loop in select_idle_sibling()
works on first glance. Sprinkle a few comments to explain the design
and intention behind the loop based on some conversations with Mike
and Peter.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Mike Galbraith <mgalbraith@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457535548-15329-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 10:52:51 +01:00
Peter Zijlstra 3a47d5124a sched/fair: Fix fairness issue on migration
Pavan reported that in the presence of very light tasks (or cgroups)
the placement of migrated tasks can cause severe fairness issues.

The problem is that enqueue_entity() places the task before it updates
time, thereby it can place the task far in the past (remember that
light tasks will shoot virtual time forward at a high speed, so in
relation to the pre-existing light task, we can land far in the past).

This is done because update_curr() needs the current task, and we
might be placing the current task.

The obvious solution is to differentiate between the current and any
other task; placing the current before we update time, and placing any
other task after, such that !curr tasks end up at the current moment
in time, and not in the past.

Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Tested-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Link: http://lkml.kernel.org/r/20160309120403.GK6344@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 10:49:23 +01:00
Peter Zijlstra 2f5177f0fd sched/cgroup: Fix/cleanup cgroup teardown/init
The CPU controller hasn't kept up with the various changes in the whole
cgroup initialization / destruction sequence, and commit:

  2e91fa7f6d ("cgroup: keep zombies associated with their original cgroups")

caused it to explode.

The reason for this is that zombies do not inhibit css_offline() from
being called, but do stall css_released(). Now we tear down the cfs_rq
structures on css_offline() but zombies can run after that, leading to
use-after-free issues.

The solution is to move the tear-down to css_released(), which
guarantees nobody (including no zombies) is still using our cgroup.

Furthermore, a few simple cleanups are possible too. There doesn't
appear to be any point to us using css_online() (anymore?) so fold that
in css_alloc().

And since cgroup code guarantees an RCU grace period between
css_released() and css_free() we can forgo using call_rcu() and free the
stuff immediately.

Suggested-by: Tejun Heo <tj@kernel.org>
Reported-by: Kazuki Yamaguchi <k@rhe.jp>
Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2e91fa7f6d ("cgroup: keep zombies associated with their original cgroups")
Link: http://lkml.kernel.org/r/20160316152245.GY6344@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 10:49:23 +01:00
Ingo Molnar 42e405f7b1 Merge branch 'linus' into sched/urgent, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 10:47:40 +01:00
Peter Zijlstra 1dcaac1ce0 perf/core: Document some hotplug bits
Document some of the hotplug notifier usage.

Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 09:35:29 +01:00
Peter Zijlstra 8184059e93 perf/core: Fix Undefined behaviour in rb_alloc()
Sasha reported:

 [ 3494.030114] UBSAN: Undefined behaviour in kernel/events/ring_buffer.c:685:22
 [ 3494.030647] shift exponent -1 is negative

Andrey spotted that this is because:

  It happens if nr_pages = 0:
     rb->page_order = ilog2(nr_pages);

Fix it by making both assignments conditional on nr_pages; since
otherwise they should both be 0 anyway, and will be because of the
kzalloc() used to allocate the structure.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160129141751.GA407@worktop
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 09:08:18 +01:00
Peter Zijlstra 91a612eea9 perf/core: Fix dynamic interrupt throttle
There were two problems with the dynamic interrupt throttle mechanism,
both triggered by the same action.

When you (or perf_fuzzer) write a huge value into
/proc/sys/kernel/perf_event_max_sample_rate the computed
perf_sample_allowed_ns becomes 0. This effectively disables the whole
dynamic throttle.

This is fixed by ensuring update_perf_cpu_limits() never sets the
value to 0. However, we allow disabling of the dynamic throttle by
writing 100 to /proc/sys/kernel/perf_cpu_time_max_percent. This will
generate a warning in dmesg.

The second problem is that by setting the max_sample_rate to a huge
number, the adaptive process can take a few tries, since it halfs the
limit each time. Change that to directly compute a new value based on
the observed duration.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 09:08:17 +01:00
Peter Zijlstra 1e02cd40f1 perf/core: Fix the unthrottle logic
Its possible to IOC_PERIOD while the event is throttled, this would
re-start the event and the next tick would then try to unthrottle it,
and find the event wasn't actually stopped anymore.

This would tickle a WARN in the x86-pmu code which isn't expecting to
start a !stopped event.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dvyukov@google.com
Cc: oleg@redhat.com
Cc: panand@redhat.com
Cc: sasha.levin@oracle.com
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160310143924.GR6356@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-21 09:08:14 +01:00
Linus Torvalds 643ad15d47 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
 "This tree adds support for a new memory protection hardware feature
  that is available in upcoming Intel CPUs: 'protection keys' (pkeys).

  There's a background article at LWN.net:

      https://lwn.net/Articles/643797/

  The gist is that protection keys allow the encoding of
  user-controllable permission masks in the pte.  So instead of having a
  fixed protection mask in the pte (which needs a system call to change
  and works on a per page basis), the user can map a (handful of)
  protection mask variants and can change the masks runtime relatively
  cheaply, without having to change every single page in the affected
  virtual memory range.

  This allows the dynamic switching of the protection bits of large
  amounts of virtual memory, via user-space instructions.  It also
  allows more precise control of MMU permission bits: for example the
  executable bit is separate from the read bit (see more about that
  below).

  This tree adds the MM infrastructure and low level x86 glue needed for
  that, plus it adds a high level API to make use of protection keys -
  if a user-space application calls:

        mmap(..., PROT_EXEC);

  or

        mprotect(ptr, sz, PROT_EXEC);

  (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
  this special case, and will set a special protection key on this
  memory range.  It also sets the appropriate bits in the Protection
  Keys User Rights (PKRU) register so that the memory becomes unreadable
  and unwritable.

  So using protection keys the kernel is able to implement 'true'
  PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
  PROT_READ as well.  Unreadable executable mappings have security
  advantages: they cannot be read via information leaks to figure out
  ASLR details, nor can they be scanned for ROP gadgets - and they
  cannot be used by exploits for data purposes either.

  We know about no user-space code that relies on pure PROT_EXEC
  mappings today, but binary loaders could start making use of this new
  feature to map binaries and libraries in a more secure fashion.

  There is other pending pkeys work that offers more high level system
  call APIs to manage protection keys - but those are not part of this
  pull request.

  Right now there's a Kconfig that controls this feature
  (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
  (like most x86 CPU feature enablement code that has no runtime
  overhead), but it's not user-configurable at the moment.  If there's
  any serious problem with this then we can make it configurable and/or
  flip the default"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
  mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
  x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
  mm/core, x86/mm/pkeys: Add execute-only protection keys support
  x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
  x86/mm/pkeys: Allow kernel to modify user pkey rights register
  x86/fpu: Allow setting of XSAVE state
  x86/mm: Factor out LDT init from context init
  mm/core, x86/mm/pkeys: Add arch_validate_pkey()
  mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
  x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
  x86/mm/pkeys: Add Kconfig prompt to existing config option
  x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
  x86/mm/pkeys: Dump PKRU with other kernel registers
  mm/core, x86/mm/pkeys: Differentiate instruction fetches
  x86/mm/pkeys: Optimize fault handling in access_error()
  mm/core: Do not enforce PKEY permissions on remote mm access
  um, pkeys: Add UML arch_*_access_permitted() methods
  mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
  x86/mm/gup: Simplify get_user_pages() PTE bit handling
  ...
2016-03-20 19:08:56 -07:00
Linus Torvalds 26660a4046 Merge branch 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'objtool' stack frame validation from Ingo Molnar:
 "This tree adds a new kernel build-time object file validation feature
  (ONFIG_STACK_VALIDATION=y): kernel stack frame correctness validation.
  It was written by and is maintained by Josh Poimboeuf.

  The motivation: there's a category of hard to find kernel bugs, most
  of them in assembly code (but also occasionally in C code), that
  degrades the quality of kernel stack dumps/backtraces.  These bugs are
  hard to detect at the source code level.  Such bugs result in
  incorrect/incomplete backtraces most of time - but can also in some
  rare cases result in crashes or other undefined behavior.

  The build time correctness checking is done via the new 'objtool'
  user-space utility that was written for this purpose and which is
  hosted in the kernel repository in tools/objtool/.  The tool's (very
  simple) UI and source code design is shaped after Git and perf and
  shares quite a bit of infrastructure with tools/perf (which tooling
  infrastructure sharing effort got merged via perf and is already
  upstream).  Objtool follows the well-known kernel coding style.

  Objtool does not try to check .c or .S files, it instead analyzes the
  resulting .o generated machine code from first principles: it decodes
  the instruction stream and interprets it.  (Right now objtool supports
  the x86-64 architecture.)

  From tools/objtool/Documentation/stack-validation.txt:

   "The kernel CONFIG_STACK_VALIDATION option enables a host tool named
    objtool which runs at compile time.  It has a "check" subcommand
    which analyzes every .o file and ensures the validity of its stack
    metadata.  It enforces a set of rules on asm code and C inline
    assembly code so that stack traces can be reliable.

    Currently it only checks frame pointer usage, but there are plans to
    add CFI validation for C files and CFI generation for asm files.

    For each function, it recursively follows all possible code paths
    and validates the correct frame pointer state at each instruction.

    It also follows code paths involving special sections, like
    .altinstructions, __jump_table, and __ex_table, which can add
    alternative execution paths to a given instruction (or set of
    instructions).  Similarly, it knows how to follow switch statements,
    for which gcc sometimes uses jump tables."

  When this new kernel option is enabled (it's disabled by default), the
  tool, if it finds any suspicious assembly code pattern, outputs
  warnings in compiler warning format:

    warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch
    warning: objtool: cik_tiling_mode_table_init()+0x6ce: call without frame pointer save/setup
    warning: objtool:__schedule()+0x3c0: duplicate frame pointer save
    warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer

  ... so that scripts that pick up compiler warnings will notice them.
  All known warnings triggered by the tool are fixed by the tree, most
  of the commits in fact prepare the kernel to be warning-free.  Most of
  them are bugfixes or cleanups that stand on their own, but there are
  also some annotations of 'special' stack frames for justified cases
  such entries to JIT-ed code (BPF) or really special boot time code.

  There are two other long-term motivations behind this tool as well:

   - To improve the quality and reliability of kernel stack frames, so
     that they can be used for optimized live patching.

   - To create independent infrastructure to check the correctness of
     CFI stack frames at build time.  CFI debuginfo is notoriously
     unreliable and we cannot use it in the kernel as-is without extra
     checking done both on the kernel side and on the build side.

  The quality of kernel stack frames matters to debuggability as well,
  so IMO we can merge this without having to consider the live patching
  or CFI debuginfo angle"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  objtool: Only print one warning per function
  objtool: Add several performance improvements
  tools: Copy hashtable.h into tools directory
  objtool: Fix false positive warnings for functions with multiple switch statements
  objtool: Rename some variables and functions
  objtool: Remove superflous INIT_LIST_HEAD
  objtool: Add helper macros for traversing instructions
  objtool: Fix false positive warnings related to sibling calls
  objtool: Compile with debugging symbols
  objtool: Detect infinite recursion
  objtool: Prevent infinite recursion in noreturn detection
  objtool: Detect and warn if libelf is missing and don't break the build
  tools: Support relative directory path for 'O='
  objtool: Support CROSS_COMPILE
  x86/asm/decoder: Use explicitly signed chars
  objtool: Enable stack metadata validation on 64-bit x86
  objtool: Add CONFIG_STACK_VALIDATION option
  objtool: Add tool to perform compile-time stack metadata validation
  x86/kprobes: Mark kretprobe_trampoline() stack frame as non-standard
  sched: Always inline context_switch()
  ...
2016-03-20 18:23:21 -07:00
Linus Torvalds 51b3eae8db Merge branch 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "A small set of patches for audit this time; just three in total and
  one is a spelling fix.

  The two patches with actual content are designed to help prevent new
  instances of auditd from displacing an existing, functioning auditd
  and to generate a log of the attempt.  Not to worry, dead/stuck auditd
  instances can still be replaced by a new instance without problem.

  Nothing controversial, and everything passes our regression suite"

* 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit:
  audit: Fix typo in comment
  audit: log failed attempts to change audit_pid configuration
  audit: stop an old auditd being starved out by a new auditd
2016-03-19 17:52:49 -07:00
Linus Torvalds 1200b6809d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...
2016-03-19 10:05:34 -07:00
Linus Torvalds 6b5f04b6cf Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "cgroup changes for v4.6-rc1.  No userland visible behavior changes in
  this pull request.  I'll send out a separate pull request for the
  addition of cgroup namespace support.

   - The biggest change is the revamping of cgroup core task migration
     and controller handling logic.  There are quite a few places where
     controllers and tasks are manipulated.  Previously, many of those
     places implemented custom operations for each specific use case
     assuming specific starting conditions.  While this worked, it makes
     the code fragile and difficult to follow.

     The bulk of this pull request restructures these operations so that
     most related operations are performed through common helpers which
     implement recursive (subtrees are always processed consistently)
     and idempotent (they make cgroup hierarchy converge to the target
     state rather than performing operations assuming specific starting
     conditions).  This makes the code a lot easier to understand,
     verify and extend.

   - Implicit controller support is added.  This is primarily for using
     perf_event on the v2 hierarchy so that perf can match cgroup v2
     path without requiring the user to do anything special.  The kernel
     portion of perf_event changes is acked but userland changes are
     still pending review.

   - cgroup_no_v1= boot parameter added to ease testing cgroup v2 in
     certain environments.

   - There is a regression introduced during v4.4 devel cycle where
     attempts to migrate zombie tasks can mess up internal object
     management.  This was fixed earlier this week and included in this
     pull request w/ stable cc'd.

   - Misc non-critical fixes and improvements"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (44 commits)
  cgroup: avoid false positive gcc-6 warning
  cgroup: ignore css_sets associated with dead cgroups during migration
  Documentation: cgroup v2: Trivial heading correction.
  cgroup: implement cgroup_subsys->implicit_on_dfl
  cgroup: use css_set->mg_dst_cgrp for the migration target cgroup
  cgroup: make cgroup[_taskset]_migrate() take cgroup_root instead of cgroup
  cgroup: move migration destination verification out of cgroup_migrate_prepare_dst()
  cgroup: fix incorrect destination cgroup in cgroup_update_dfl_csses()
  cgroup: Trivial correction to reflect controller.
  cgroup: remove stale item in cgroup-v1 document INDEX file.
  cgroup: update css iteration in cgroup_update_dfl_csses()
  cgroup: allocate 2x cgrp_cset_links when setting up a new root
  cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask
  cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends
  cgroup: use cgroup_apply_enable_control() in cgroup creation path
  cgroup: combine cgroup_mutex locking and offline css draining
  cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()
  cgroup: introduce cgroup_{save|propagate|restore}_control()
  cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive
  cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write()
  ...
2016-03-18 20:25:49 -07:00
Linus Torvalds ef504fa591 Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
 "Three trivial workqueue changes"

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for work_on_cpu()
  sched/core: Get rid of 'cpu' argument in wq_worker_sleeping()
  workqueue: Replace usage of init_name with dev_set_name()
2016-03-18 20:05:39 -07:00
Linus Torvalds 814a2bf957 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...
2016-03-18 19:26:54 -07:00
Dmitry Safonov 741f3a69f1 tracing: Remove redundant reset per-CPU buff in irqsoff tracer
There is no reason to do it twice: from commit b6f11df26f
("trace: Call tracing_reset_online_cpus before tracer->init()")
resetting of per-CPU buffers done before tracer->init() call.

tracer->init() calls {irqs,preempt,preemptirqs}off_tracer_init() and it
calls __irqsoff_tracer_init(), which resets per-CPU ringbuffer second
time.
It's slowpath, but anyway.

Link: http://lkml.kernel.org/r/1445278226-16187-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 16:39:11 -04:00
Steven Rostedt (Red Hat) a29054d947 tracing: Fix crash from reading trace_pipe with sendfile
If tracing contains data and the trace_pipe file is read with sendfile(),
then it can trigger a NULL pointer dereference and various BUG_ON within the
VM code.

There's a patch to fix this in the splice_to_pipe() code, but it's also a
good idea to not let that happen from trace_pipe either.

Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in

Cc: stable@vger.kernel.org # 2.6.30+
Reported-by: Rabin Vincent <rabin.vincent@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 15:51:42 -04:00
Steven Rostedt (Red Hat) cb86e05390 tracing: Have preempt(irqs)off trace preempt disabled functions
Joel Fernandes reported that the function tracing of preempt disabled
sections was not being reported when running either the preemptirqsoff or
preemptoff tracers. This was due to the fact that the function tracer
callback for those tracers checked if irqs were disabled before tracing. But
this fails when we want to trace preempt off locations as well.

Joel explained that he wanted to see funcitons where interrupts are enabled
but preemption was disabled. The expected output he wanted:

   <...>-2265    1d.h1 3419us : preempt_count_sub <-irq_exit
   <...>-2265    1d..1 3419us : __do_softirq <-irq_exit
   <...>-2265    1d..1 3419us : msecs_to_jiffies <-__do_softirq
   <...>-2265    1d..1 3420us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d..1 3420us : __local_bh_disable_ip <-__do_softirq
   <...>-2265    1..s1 3421us : run_timer_softirq <-__do_softirq
   <...>-2265    1..s1 3421us : hrtimer_run_pending <-run_timer_softirq
   <...>-2265    1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq
   <...>-2265    1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq
   <...>-2265    1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq
   <...>-2265    1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq
   <...>-2265    1..s1 3423us : rcu_bh_qs <-__do_softirq
   <...>-2265    1d.s1 3423us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d.s1 3423us : __local_bh_enable <-__do_softirq

There's a comment saying that the irq disabled check is because there's a
possible race that tracing_cpu may be set when the function is executed. But
I don't remember that race. For now, I added a check for preemption being
enabled too to not record the function, as there would be no race if that
was the case. I need to re-investigate this, as I'm now thinking that the
tracing_cpu will always be correct. But no harm in keeping the check for
now, except for the slight performance hit.

Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com

Fixes: 5e6d2b9cfa "tracing: Use one prologue for the preempt irqs off tracer function tracers"
Cc: stable@vget.kernel.org # 2.6.37+
Reported-by: Joel Fernandes <agnel.joel@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 12:47:38 -04:00
Chunyu Hu c8ca003b2f tracing: Fix return while holding a lock in register_tracer()
commit d39cdd2036 ("tracing: Make tracer_flags use the right set_flag
callback")  introduces a potential mutex deadlock issue, as it forgets to
free the mutex when allocaing the tracer_flags gets fail.

The issue was found by Dan Carpenter through Smatch static code check tool.

Link: http://lkml.kernel.org/r/1457958941-30265-1-git-send-email-chuhu@redhat.com

Fixes: d39cdd2036 ("tracing: Make tracer_flags use the right set_flag callback")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 10:36:21 -04:00
Geliang Tang 6363c6b599 ftrace: Use kasprintf() in ftrace_profile_tracefs()
Use kasprintf() instead of kmalloc() and snprintf().

Link: http://lkml.kernel.org/r/135a7bc36e51fd9eaa57124dd2140285b771f738.1458050835.git.geliangtang@163.com

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 10:31:34 -04:00
Jiri Olsa 7f50d06bb6 ftrace: Update dynamic ftrace calls only if necessary
Currently dynamic ftrace calls are updated any time
the ftrace_ops is un/registered. If we do  this update
only when it's needed, we save lot of time for perf
system wide ftrace function sampling/counting.

The reason is that for system wide sampling/counting,
perf creates event for each cpu in the system.

Each event then registers separate copy of ftrace_ops,
which ends up in FTRACE_UPDATE_CALLS updates. On servers
with many cpus that means serious stall (240 cpus server):

Counting:
  # time ./perf stat -e ftrace:function -a sleep 1

   Performance counter stats for 'system wide':

              370,663      ftrace:function

          1.401427505 seconds time elapsed

  real    3m51.743s
  user    0m0.023s
  sys     3m48.569s

Sampling:
  # time ./perf record -e ftrace:function -a sleep 1
  [ perf record: Woken up 0 times to write data ]
  Warning:
  Processed 141200 events and lost 5 chunks!

  [ perf record: Captured and wrote 10.703 MB perf.data (135950 samples) ]

  real    2m31.429s
  user    0m0.213s
  sys     2m29.494s

There's no reason to do the FTRACE_UPDATE_CALLS update
for each event in perf case, because all the ftrace_ops
always share the same filter, so the updated calls are
always the same.

It's required that only first ftrace_ops registration
does the FTRACE_UPDATE_CALLS update (also sometimes
the second if the first one used the trampoline), but
the rest can be only cheaply linked into the ftrace_ops
list.

Counting:
  # time ./perf stat -e ftrace:function -a sleep 1

   Performance counter stats for 'system wide':

             398,571      ftrace:function

         1.377503733 seconds time elapsed

  real    0m2.787s
  user    0m0.005s
  sys     0m1.883s

Sampling:
  # time ./perf record -e ftrace:function -a sleep 1
  [ perf record: Woken up 0 times to write data ]
  Warning:
  Processed 261730 events and lost 9 chunks!

  [ perf record: Captured and wrote 19.907 MB perf.data (256293 samples) ]

  real    1m31.948s
  user    0m0.309s
  sys     1m32.051s

Link: http://lkml.kernel.org/r/1458138873-1553-6-git-send-email-jolsa@kernel.org

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 10:30:34 -04:00
Jiri Olsa 84b6d3e614 ftrace: Make ftrace_hash_rec_enable return update bool
Change __ftrace_hash_rec_update to return true in case
we need to update dynamic ftrace call records. It return
false in case no update is needed.

Link: http://lkml.kernel.org/r/1458138873-1553-5-git-send-email-jolsa@kernel.org

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-18 10:30:15 -04:00
Linus Torvalds 0f49fc95b8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching update from Jiri Kosina:

 - cleanup of module notifiers; this depends on a module.c cleanup which
   has been acked by Rusty; from Jessica Yu

 - small assorted fixes and MAINTAINERS update

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch/module: remove livepatch module notifier
  modules: split part of complete_formation() into prepare_coming_module()
  livepatch: Update maintainers
  livepatch: Fix the error message about unresolvable ambiguity
  klp: remove CONFIG_LIVEPATCH dependency from klp headers
  klp: remove superfluous errors in asm/livepatch.h
2016-03-17 21:46:32 -07:00