Commit Graph

390 Commits

Author SHA1 Message Date
Linus Torvalds 63e30271b0 PCI changes for the v4.6 merge window:
Enumeration
     Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
 
   Resource management
     Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     Don't assign or reassign immutable resources (Bjorn Helgaas)
     Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
     Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
     Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
     ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
     ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
     Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
     rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
     designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
 
   Virtualization
     Wait for up to 1000ms after FLR reset (Alex Williamson)
     Support SR-IOV on any function type (Kelly Zytaruk)
     Add ACS quirk for all Cavium devices (Manish Jaggi)
 
   AER
     Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
     Restore pci_ops pointer while calling original pci_ops (David Daney)
     Fix aer_inject error codes (Jean Delvare)
     Use dev_warn() in aer_inject (Jean Delvare)
     Log actual error causes in aer_inject (Jean Delvare)
     Log aer_inject error injections (Jean Delvare)
 
   VPD
     Prevent VPD access for buggy devices (Babu Moger)
     Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
     Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
     Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
     Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
     Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
     Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
     Update VPD definitions (Hannes Reinecke)
     Allow access to VPD attributes with size 0 (Hannes Reinecke)
     Determine actual VPD size on first access (Hannes Reinecke)
 
   Generic host bridge driver
     Move structure definitions to separate header file (David Daney)
     Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
     Expose pci_host_common_probe() for use by other drivers (David Daney)
 
   Altera host bridge driver
     Fix altera_pcie_link_is_up() (Ley Foon Tan)
 
   Cavium ThunderX host bridge driver
     Add PCIe host driver for ThunderX processors (David Daney)
     Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
 
   Freescale i.MX6 host bridge driver
     Add DT bindings to configure PHY Tx driver settings (Justin Waters)
     Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
     Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
     Remove broken Gen2 workaround (Lucas Stach)
     Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
 
   Freescale Layerscape host bridge driver
     Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
 
   Intel VMD host bridge driver
     Attach VMD resources to parent domain's resource tree (Jon Derrick)
     Set bus resource start to 0 (Keith Busch)
 
   Microsoft Hyper-V host bridge driver
     Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
     Look up IRQ domain by fwnode_handle (Jake Oshins)
     Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
 
   NVIDIA Tegra host bridge driver
     Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
     Implement ->{add,remove}_bus() callbacks (Thierry Reding)
     Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
     Track bus -> CPU mapping (Thierry Reding)
     Remove misleading PHYS_OFFSET (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     ARC: Add PCI support (Joao Pinto)
     Add generic dw_pcie_wait_for_link() (Joao Pinto)
     Add default link up check if sub-driver doesn't override (Joao Pinto)
     Add driver for prototyping kits based on ARC SDP (Joao Pinto)
 
   TI Keystone host bridge driver
     Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
 
   Xilinx AXI host bridge driver
     Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
     Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
     Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
     Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
     microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
 
   Xilinx NWL host bridge driver
     Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
 
   Miscellaneous
     Check device_attach() return value always (Bjorn Helgaas)
     Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
     Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
     Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
     unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
     Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
     Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
     Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
     frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
     Move pci_dma_* helpers to common code (Christoph Hellwig)
     Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
     Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
     Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6
 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z
 j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO
 n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0
 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB
 XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY
 rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB
 p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz
 lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA
 YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D
 R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU
 c8zT9dJgyJVE3Z7cnPJ4
 =otsF
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
2016-03-16 14:45:55 -07:00
Bjorn Helgaas 18e5e6913b Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next
* pci/aer:
  PCI/AER: Log aer_inject error injections
  PCI/AER: Log actual error causes in aer_inject
  PCI/AER: Use dev_warn() in aer_inject
  PCI/AER: Fix aer_inject error codes

* pci/enumeration:
  PCI: Fix broken URL for Dell biosdevname

* pci/kconfig:
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
  PCI: Include pci/pcie/Kconfig directly from pci/Kconfig

* pci/misc:
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: Add QEMU top-level IDs for (sub)vendor & device
  unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition
  PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
  PCI: Move pci_dma_* helpers to common code
  frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration

* pci/virtualization:
  PCI: Wait for up to 1000ms after FLR reset
  PCI: Support SR-IOV on any function type

* pci/vpd:
  PCI: Prevent VPD access for buggy devices
  PCI: Sleep rather than busy-wait for VPD access completion
  PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
  PCI: Rename VPD symbols to remove unnecessary "pci22"
  PCI: Remove struct pci_vpd_ops.release function pointer
  PCI: Move pci_vpd_release() from header file to pci/access.c
  PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code
  PCI: Determine actual VPD size on first access
  PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy
  PCI: Allow access to VPD attributes with size 0
  PCI: Update VPD definitions
2016-03-15 08:55:02 -05:00
Andreas Ziegler cc73176cc9 PCI: Cleanup pci/pcie/Kconfig whitespace
Clean up style issues in drivers/pci/pcie/Kconfig, in particular all
indentation is now done using tabs, not spaces, and the definition of
PCIEASPM_DEBUG is now separated from the definition of PCIEASPM with a
newline.

Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-15 08:46:57 -05:00
Jean Delvare 8e47e15e91 PCI/AER: Log aer_inject error injections
Log successful error injections so that injected errors can be
differentiated from real errors.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
2016-03-08 15:52:13 -06:00
Jean Delvare 96b45ea5dc PCI/AER: Log actual error causes in aer_inject
The aer_inject driver is very quiet.  In most cases, it merely returns an
error code to user-space, leaving the user with little clue about the
actual reason for the failure.

So, log error messages for 4 of the most frequent causes of failure:
* Can't find the root port of the specified device.
* Device doesn't support AER.
* Root port doesn't support AER.
* AER device not found.

This gives the user a chance to understand why aer-inject failed.

Based on a preliminary patch by Thomas Renninger.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Thomas Renninger <trenn@suse.de>
2016-03-08 15:51:25 -06:00
Jean Delvare 3bc1185141 PCI/AER: Use dev_warn() in aer_inject
dev_warn() is better than printk(LOG_WARNING...) as it records which device
the message relates to.  Also add a prefix "aer_inject:" to help
differentiate real errors from injected errors.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
2016-03-08 15:50:42 -06:00
Jean Delvare 20ac75e563 PCI/AER: Fix aer_inject error codes
EPERM means "Operation not permitted", which doesn't reflect the lack of
support for AER.  EPROTONOSUPPORT (Protocol not supported) is a better
choice of error code if the device or its root port lack support for AER.

Likewise, EINVAL means "Invalid argument", which is not suitable for cases
where the AER error device is missing or unusable.  ENODEV and
EPROTONOSUPPORT, respectively, fit better.

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Prarit Bhargava <prarit@redhat.com>
2016-03-08 15:48:56 -06:00
Bjorn Helgaas 129aaabc84 Merge branches 'pci/aer', 'pci/misc' and 'pci/virtualization' into next
* pci/aer:
  PCI/AER: Use list_first_entry_or_null() to simplify code
  PCI/AER: Restore pci_ops pointer while calling original pci_ops
  PCI/AER: Rename pci_ops_aer to aer_inj_pci_ops

* pci/misc:
  PCI: Remove includes of asm/pci-bridge.h
  PCI: Remove empty asm-generic/pci-bridge.h
  ARM64: PCI: Remove generated include of asm-generic/pci-bridge.h
  PCI: Remove includes of empty asm-generic/pci-bridge.h
  PCI: Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h
  PCI/PME: Restructure pcie_pme_suspend() to prevent compiler warning
  PCI/PME: Remove redundant port lookup
  PCI: Check device_attach() return value always

* pci/virtualization:
  PCI: Add ACS quirk for all Cavium devices
2016-02-09 12:45:58 -06:00
Bjorn Helgaas 41ccebaece PCI/PME: Restructure pcie_pme_suspend() to prevent compiler warning
Previously we had this:

  if (wakeup)
    ret = enable_irq_wake(...);
  if (!wakeup || ret)
    ...

"ret" is only evaluated when "wakeup" is true, and it is always initialized
in that case, but gcc isn't smart enough to figure that out and warns:

  drivers/pci/pcie/pme.c:414:14: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]

Restructure the code slightly to make it easier for gcc (and maybe for
humans as well).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com
2016-02-05 16:28:03 -06:00
Bjorn Helgaas 4e48fe4148 PCI/PME: Remove redundant port lookup
We've already looked up srv->port a few lines earlier, and there's no need
to do it again.  Remove the redundant lookup.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com
2016-02-05 16:27:56 -06:00
Geliang Tang 0e6053dc6e PCI/AER: Use list_first_entry_or_null() to simplify code
Use list_first_entry_or_null() instead of list_empty() + list_entry() to
simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-04 16:03:53 -06:00
David Daney 7e8fbdc628 PCI/AER: Restore pci_ops pointer while calling original pci_ops
The aer_inject module intercepts config space accesses by replacing the
bus->ops pointer.  If it forwards accesses to the original pci_ops, and
those original ops use bus->ops, they see the aer_pci_ops instead of their
own pci_ops, which can cause a crash.

For example, pci_generic_config_read() uses the bus->ops->map_bus pointer.
If bus->ops is set to aer_pci_ops, which doesn't supply .map_bus,
pci_generic_config_read() will dereference an invalid pointer and cause a
crash.

Temporarily restore the original bus->ops pointer while calling ops->read()
or ops->write().  Callers of these functions already hold pci_lock, which
prevents other users of bus->ops until we're finished.

[bhelgaas: changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-04 14:26:27 -06:00
Bjorn Helgaas 3b0a6d1a1b PCI/AER: Rename pci_ops_aer to aer_inj_pci_ops
Rename

  pci_ops_aer     to aer_inj_pci_ops
  pci_read_aer()  to aer_inj_read_config()
  pci_write_aer() to aer_inj_write_config()

This is more conventional and more informative.  No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-04 14:02:45 -06:00
Sebastian Andrzej Siewior 4ae2182b1e PCI/AER: Flush workqueue on device remove to avoid use-after-free
A Root Port's AER structure (rpc) contains a queue of events.  aer_irq()
enqueues AER status information and schedules aer_isr() to dequeue and
process it.  When we remove a device, aer_remove() waits for the queue to
be empty, then frees the rpc struct.

But aer_isr() references the rpc struct after dequeueing and possibly
emptying the queue, which can cause a use-after-free error as in the
following scenario with two threads, aer_isr() on the left and a
concurrent aer_remove() on the right:

  Thread A                      Thread B
  --------                      --------
  aer_irq():
    rpc->prod_idx++
                                aer_remove():
                                  wait_event(rpc->prod_idx == rpc->cons_idx)
                                  # now blocked until queue becomes empty
  aer_isr():                      # ...
    rpc->cons_idx++               # unblocked because queue is now empty
    ...                           kfree(rpc)
    mutex_unlock(&rpc->rpc_mutex)

To prevent this problem, use flush_work() to wait until the last scheduled
instance of aer_isr() has completed before freeing the rpc struct in
aer_remove().

I reproduced this use-after-free by flashing a device FPGA and
re-enumerating the bus to find the new device.  With SLUB debug, this
crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in
GPR25:

  pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000
  Unable to handle kernel paging request for data at address 0x27ef9e3e
  Workqueue: events aer_isr
  GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0
  NIP [602f5328] pci_walk_bus+0xd4/0x104

[bhelgaas: changelog, stable tag]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
2016-01-25 10:08:00 -06:00
Bjorn Helgaas 3a6384ba10 Merge branch 'pci/host-vmd' into next
* pci/host-vmd:
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
2016-01-15 16:14:39 -06:00
Keith Busch 28ef241f05 PCI/AER: Use 32 bit PCI domain numbers
The Intel Volume Management Device (VMD) supports 32-bit domain numbers.
To accommodate this, use u32 instead of u16 to store domain numbers.

[bhelgaas: changelog]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-15 13:54:55 -06:00
Bjorn Helgaas 800e07b609 Merge branches 'pci/aspm', 'pci/hotplug', 'pci/misc' and 'pci/msi' into next
* pci/aspm:
  PCI/ASPM: Make sysfs link_state_store() consistent with link_state_show()

* pci/hotplug:
  PCI: pciehp: Always protect pciehp_disable_slot() with hotplug mutex

* pci/misc:
  x86/PCI: Simplify pci_bios_{read,write}
  PCI: Simplify config space size computation
  PCI: Limit config space size for Netronome NFP6000 family
  PCI: Add Netronome vendor and device IDs
  PCI: Support PCIe devices with short cfg_size
  x86/PCI: Clarify AMD Fam10h config access restrictions comment
  PCI: Print warnings for all invalid expansion ROM headers
  PCI: Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask

* pci/msi:
  PCI/MSI: Remove empty pci_msi_init_pci_dev()
  PCI/MSI: Initialize MSI capability for all architectures
2015-12-10 19:40:14 -06:00
Bjorn Helgaas 93de690176 PCI: Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask
Bit 7 of the "Header Type" register indicates a multi-function device when
set.  Bits 0-6 contain encoded values, where 0x1 indicates a PCI-PCI
bridge.  It is incorrect to test this as though it were a mask.

For example, while the PCI 3.0 spec only defines values 0x0, 0x1, and 0x2,
it's conceivable that a future spec could define 0x3 to mean something
else; then tests for "(hdr_type & 0x7f) & PCI_HEADER_TYPE_BRIDGE" would
incorrectly succeed for this new 0x3 header type.

Test bits 0-6 of the Header Type for equality with PCI_HEADER_TYPE_BRIDGE.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-10 19:38:06 -06:00
Andy Lutomirski 57d86a0485 PCI/ASPM: Make sysfs link_state_store() consistent with link_state_show()
If CONFIG_PCIEASPM_DEBUG is set, then PCI devices have a link_state
attribute.  Reading that attribute shows the state as a bit mask: 1
means L0S upstream, 2 means L0S downstream, and 4 means L1.

Oddly, writing to link_state is inconsistent and gets translated, leading
to mysterious results in which the value you store isn't comparable the
value you load back out.

Fix it by making link_state_store() match link_state_show().

[bhelgaas: Check "aspm_disabled" *before* validating input.  When
"aspm_disabled" is set, this changes the error for invalid input from
-EINVAL to -EPERM.]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-03 10:42:59 -06:00
Taku Izumi b07461a8e4 PCI/AER: Clear error status registers during enumeration and restore
AER errors might be recorded when powering-on devices.  These errors can be
ignored, so firmware usually clears them before the OS enumerates devices.
However, firmware is not involved when devices are added via hotplug, so
the OS may discover power-up errors that should be ignored.  The same may
happen when powering up devices when resuming after suspend.

Clear the AER error status registers during enumeration and resume.

[bhelgaas: changelog, remove repetitive comments]
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-17 10:09:37 -05:00
Bjorn Helgaas e7f6c6d02c PCI: Fix pcie_port_device_resume() comment
The function comment claimed this was pcie_port_device_suspend(), but it's
really pcie_port_device_resume().  Perils of cut and paste.

Use the correct function name in the comment.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-14 13:41:04 -05:00
Bjorn Helgaas 0c0cbb6c5a PCI/ASPM: Simplify Clock Power Management setting
Update the Link Control Enable Clock Power Management bit the same
way we update the ASPM Control bits, with a single call of
pcie_capability_clear_and_set_word().

No functional change; this just makes both paths use the same style.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-10 14:00:21 -05:00
Yijing Wang 777e61ea40 PCI: Use dev->has_secondary_link to find downstream PCIe links
Previously we assumed that PCIe Root Ports and Downstream Ports had Links
on their secondary side.  That is true in most systems, but it is possible
to connect a switch with either an Upstream or a Downstream Port leading
downstream.

Instead of relying on the component type to identify devices that have
links leading downstream, use the "dev->has_secondary_link" field.

[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-29 15:35:26 -05:00
Yijing Wang c8fc933940 PCI/ASPM: Use dev->has_secondary_link to find downstream links
We allocate pcie_link_state for the component at the upstream end of a
Link.  Previously we did this by allocating pcie_link_state for Root Ports
and Downstream Ports.  This works fine for the typical topology:

  00:1c.0 Root Port       [bridge to bus 02]
  02:00.0 Upstream Port   [bridge to bus 03]
  03:00.0 Downstream Port [bridge to bus 04]
  04:00.0 Endpoint or Switch Port

However, it is possible to have a Root Port connected to a Downstream Port
instead of an Upstream Port, as in Robert White's ATCA system:

  00:1c.0 Root Port       [bridge to bus 02]
  02:00.0 Downstream Port [bridge to bus 03]
  03:01.0 Downstream Port [bridge to bus 04]
  04:00.0 Endpoint or Switch Port

In this topology, we wrongly allocated pcie_link_state for the 02:00.0
Downstream Port, which is actually the *downstream* end of a link.  This
led to the following NULL pointer dereference when we tried to connect this
link into the tree of links starting at the 00:1c.0 Root Port:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
  IP: [<ffffffff81550324>] pcie_aspm_init_link_state+0x744/0x850
  Hardware name: Kontron B3001/B3001, BIOS 4.6.3 08/07/2012
  Call Trace:
   [<ffffffff8153b865>] pci_scan_slot+0xd5/0x120
   [<ffffffff8153ca1d>] pci_scan_child_bus+0x2d/0xd0
   ...

Instead of relying on the component type to identify the upstream end of a
link, use the "dev->has_secondary_link" field.

This means it's now possible for an Upstream Port to have a link on its
secondary side, so alloc_pcie_link_state() needs to connect links
originating from both Upstream and Downstream Ports into the tree.

[bhelgaas: changelog, add comment]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94361
Link: http://lkml.kernel.org/r/54EB81B2.4050904@pobox.com
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-26 12:56:47 -05:00
Yijing Wang f9b8cd7c27 PCI/ASPM: Remove redundant PCIe port type checking
We decide in alloc_pcie_link_state() whether to allocate a pcie_link_state
for a device.  After that, it's sufficient to check pdev->link_state.  We
don't need to check the PCIe port type again.

Remove the redundant PCIe port type checking.

[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-20 12:28:11 -05:00
Bjorn Helgaas e127a04f22 PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter
After 387d37577f ("PCI: Don't clear ASPM bits when the FADT declares it's
unsupported"), the "force" parameter to __pci_disable_link_state() is
always "false".

Remove the "force" parameter and assume it's always false.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-20 12:13:05 -05:00
Linus Torvalds 3be1b98e07 PCI changes for the v4.1 merge window:
Enumeration
     - Read capability list as dwords, not bytes (Sean O. Stalley)
 
   Resource management
     - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
     - Mark invalid BARs as unassigned (Bjorn Helgaas)
     - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
     - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
     - Assign resources before drivers claim devices (Yijing Wang)
     - Claim bus resources before pci_bus_add_devices() (Yijing Wang)
 
   Power management
     - Optimize device state transition delays (Aaron Lu)
     - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)
 
   Virtualization
     - Add ACS quirks for Intel 1G NICs (Alex Williamson)
 
   IOMMU
     - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
     - Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
     - Fix size when dma-range is not used (Murali Karicheri)
     - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
     - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
     - Update DMA configuration from DT (Murali Karicheri)
     - dma-mapping: limit IOMMU mapping size (Murali Karicheri)
     - Calculate device DMA masks based on DT dma-range size (Murali Karicheri)
 
   ARM Versatile host bridge driver
     - Check for devm_ioremap_resource() failures (Jisheng Zhang)
 
   Broadcom iProc host bridge driver
     - Add Broadcom iProc PCIe driver (Ray Jui)
 
   Marvell MVEBU host bridge driver
     - Add suspend/resume support (Thomas Petazzoni)
 
   Renesas R-Car host bridge driver
     - Fix position of MSI enable bit (Nobuhiro Iwamatsu)
     - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
     - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
     - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)
 
   Samsung Exynos host bridge driver
     - Fix INTx enablement statement termination error (Jaehoon Chung)
 
   Miscellaneous
     - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
     - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVK/X+AAoJEFmIoMA60/r8hlkP/0e1GhAWA3DGR/+O2OPIkJ2w
 dQVgv5IN5KXGExT9RHiDL/Ib2PhDvdVI26sinjtkw/FcjyzoWVsPDUzCYudQaPSr
 zwzZto7dBzfv+exDN2LOqoSscCORAehApmTgYVg29cofJmKlO2ctDtpem1OT0MQ9
 CMRMoBHhRe4FF3VJPOBPDXYpS89TObrY600aMDGk4S2uBboZI3aeYiTNLXJyh6fX
 vRg3TWnTfQHoZINW/YOqao/WbrRixZbO6q4n2IqhI6i/uaAc1IEALk9im8/2ri/s
 mgb/K5Elq+j4yUGnbFRz62pj/YxwnQKwVO4Nc7P66zENgoOXtv+OGRhlS4+d00/n
 ux0+BkoxJdaL8HQ/b7+uPydiD85lbERM+B2+LQQ7JN+HI+UEcQ0PsK2hSQKb3njD
 uEkktlKZViiqALijpL+vKRFe8U4GRE4KUfVsKHhhPPvY5sQTAZ3DrR36e1zKz2pA
 YJjtaHYW0S/tfoEzi3EnPistbJw5sT0/Waj31QTKb/P0Fr7pHnJfcwV7+unXbKla
 Osz8m6ELIqxhnuzhjlbayh4MKn49n1ZlwkwCnBdjgLQy0KZtxsWZoBg8LeGU077c
 TJXukRfl3H8LvpqGMYaxOyw7yUeKobEWy+Ylo5asFnfFw9h6zvW+Sc97jtBCrm4/
 OZa7rKdPQGGMbQFMvDc2
 =vEVs
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Read capability list as dwords, not bytes (Sean O. Stalley)

  Resource management
    - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
    - Mark invalid BARs as unassigned (Bjorn Helgaas)
    - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
    - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
    - Assign resources before drivers claim devices (Yijing Wang)
    - Claim bus resources before pci_bus_add_devices() (Yijing Wang)

  Power management
    - Optimize device state transition delays (Aaron Lu)
    - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)

  Virtualization
    - Add ACS quirks for Intel 1G NICs (Alex Williamson)

  IOMMU
    - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
    - Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
    - Fix size when dma-range is not used (Murali Karicheri)
    - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
    - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
    - Update DMA configuration from DT (Murali Karicheri)
    - dma-mapping: limit IOMMU mapping size (Murali Karicheri)
    - Calculate device DMA masks based on DT dma-range size (Murali Karicheri)

  ARM Versatile host bridge driver
    - Check for devm_ioremap_resource() failures (Jisheng Zhang)

  Broadcom iProc host bridge driver
    - Add Broadcom iProc PCIe driver (Ray Jui)

  Marvell MVEBU host bridge driver
    - Add suspend/resume support (Thomas Petazzoni)

  Renesas R-Car host bridge driver
    - Fix position of MSI enable bit (Nobuhiro Iwamatsu)
    - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
    - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
    - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)

  Samsung Exynos host bridge driver
    - Fix INTx enablement statement termination error (Jaehoon Chung)

  Miscellaneous
    - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
    - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)"

* tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits)
  PCI: Read capability list as dwords, not bytes
  PCI: layerscape: Simplify platform_get_resource_byname() failure checking
  PCI: keystone: Don't dereference possible NULL pointer
  PCI: versatile: Check for devm_ioremap_resource() failures
  PCI: Don't clear ASPM bits when the FADT declares it's unsupported
  PCI: Clarify policy for vendor IDs in pci.txt
  PCI/ACPI: Optimize device state transition delays
  PCI: Export pci_find_host_bridge() for use inside PCI core
  PCI: Make a shareable UUID for PCI firmware ACPI _DSM
  PCI: Fix typo in Thunderbolt kernel message
  PCI: exynos: Fix INTx enablement statement termination error
  PCI: iproc: Add Broadcom iProc PCIe support
  PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
  PCI: Export symbols required for loadable host driver modules
  PCI: Add ACS quirks for Intel 1G NICs
  PCI: mvebu: Add suspend/resume support
  PCI: Cleanup control flow
  sparc/PCI: Claim bus resources before pci_bus_add_devices()
  PCI: Assign resources before drivers claim devices (pci_scan_root_bus())
  PCI: Fail pci_ioremap_bar() on unassigned resources
  ...
2015-04-13 15:45:47 -07:00
Matthew Garrett 387d37577f PCI: Don't clear ASPM bits when the FADT declares it's unsupported
Communications with a hardware vendor confirm that the expected behaviour
on systems that set the FADT ASPM disable bit but which still grant full
PCIe control is for the OS to leave any BIOS configuration intact and
refuse to touch the ASPM bits.  This mimics the behaviour of Windows.

Signed-off-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09 14:20:11 -05:00
Rasmus Villemoes a1b7f2f636 PCI/AER: Avoid info leak in __print_tlp_header()
Commit fab4c256a5 ("PCI/AER: Add a TLP header print helper") introduced
the helper function __print_tlp_header(), but contrary to the intention,
the behaviour did change: Since we're taking the address of the parameter
t, the first 4 or 8 bytes printed will be the value of the pointer t
itself, and the remaining 12 or 8 bytes will be who-knows-what (something
from the stack).

We want to show the values of the four members of the struct
aer_header_log_regs; that can be done without ugly and error-prone casts.
On little-endian this should produce the same output as originally
intended, and since no-one has complained about getting garbage output so
far, I think big-endian should be ok too.

Fixes: fab4c256a5 ("PCI/AER: Add a TLP header print helper")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
CC: stable@vger.kernel.org	# v3.14+
2015-03-06 12:30:23 -06:00
Linus Torvalds b11a278397 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes
2015-02-19 10:36:45 -08:00
Chris J Arges 94a90312e4 PCI/ASPM: Use standard parsing functions for sysfs setters
The functions link_state_store() and clk_ctl_store() had just subtracted
ASCII '0' from input which could lead to undesired results.  Instead, use
Linux string functions to safely parse input.

[bhelgaas: check kstrtouint() return value]
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-01-09 10:55:16 -07:00
Christoph Jaeger 6341e62b21 kconfig: use bool instead of boolean for type definition attributes
Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-07 13:08:04 +01:00
Rafael J. Wysocki fbb988be7f PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PCI core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:50:33 +01:00
Lucas Stach 5dfd7f9f88 PCI / PM: handle failure to enable wakeup on PCIe PME
If the irqchip handling the PCIe PME interrupt is not able
to enable interrupt wakeup we should properly reflect this
in the PME suspend status.

This fixes a kernel warning on resume, where it would try
to disable the irq wakeup that failed to be activated while
suspending, for example:

WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8()
Unbalanced IRQ 384 wake disable

Fixes: 76cde7e495 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23 22:47:28 +02:00
Linus Torvalds b528392669 ACPI and power management updates for 3.18-rc1
- Rework the handling of wakeup IRQs by the IRQ core such that
    all of them will be switched over to "wakeup" mode in
    suspend_device_irqs() and in that mode the first interrupt
    will abort system suspend in progress or wake up the system
    if already in suspend-to-idle (or equivalent) without executing
    any interrupt handlers.  Among other things that eliminates the
    wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt
    flag with interrupts which don't really need it and should not
    use it (Thomas Gleixner and Rafael J Wysocki).
 
  - Switch over ACPI to handling wakeup interrupts with the help
    of the new mechanism introduced by the above IRQ core rework
    (Rafael J Wysocki).
 
  - Rework the core generic PM domains code to eliminate code that's
    not used, add DT support and add a generic mechanism by which
    devices can be added to PM domains automatically during
    enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
 
  - Add debugfs-based mechanics for debugging generic PM domains
    (Maciej Matraszek).
 
  - ACPICA update to upstream version 20140828.  Included are updates
    related to the SRAT and GTDT tables and the _PSx methods are in
    the METHOD_NAME list now (Bob Moore and Hanjun Guo).
 
  - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
    can't really be done in a straightforward way) to prevent
    Thunderbolt from being turned off on Apple systems after boot
    (or after resume from system suspend) and rework the ACPI Smart
    Battery Subsystem (SBS) driver to work correctly with Apple
    platforms (Matthew Garrett and Andreas Noever).
 
  - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the
    code, adding support for 133MHz I2C source clock on Intel Baytrail
    to it and making it avoid using UART RTS override with Auto Flow
    Control (Heikki Krogerus).
 
  - ACPI backlight updates removing the video_set_use_native_backlight
    quirk which is not necessary any more, making the code check the
    list of output devices returned by the _DOD method to avoid
    creating acpi_video interfaces that won't work and adding a quirk
    for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak).
 
  - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin).
 
  - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
    Sudip Mukherjee, Yijing Wang, and Zhang Rui).
 
  - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
    Rasmus Villemoes).
 
  - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name
    change among other things), ppc-corenet, powernv (Viresh Kumar,
    Preeti U Murthy, Shilpasri G Bhat, Lucas Stach).
 
  - cpuidle support for DT-based idle states infrastructure, new
    ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi,
    Rasmus Villemoes).
 
  - ARM big.LITTLE cpuidle driver updates: support for DT-based
    initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
    Kevin Hilman).
 
  - Rework of the test_suspend kernel command line argument and
    a new trace event for console resume (Srinivas Pandruvada,
    Todd E Brandt).
 
  - Second attempt to optimize swsusp_free() (hibernation core) to
    make it avoid going through all PFNs which may be way too slow on
    some systems (Joerg Roedel).
 
  - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
 
  - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS
    entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman).
 
  - PM core fix related to clock management (Geert Uytterhoeven).
 
  - PM core's sysfs code cleanup (Johannes Berg).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUNbJoAAoJEILEb/54YlRxRp8QAJyGIPdx+f03oBir+7vvEwhY
 svxd+V9xXK0UgWNGkCvlMk/1RIVy0qqtXliUrDaE+9tcHACA9+iAxMmNmDsjLOiO
 gpazuz5kgeznrmp1eNwQnYTt+OCReQIcyCsj4q4fNo9bbETTyr2bRz226LEuZekC
 TAiKdphYoOszFBgTVg5gfu+lqjHyXjgXPnwMTlRYn1y4YL2adDIgxj9cFedykTTW
 Eu593TY2dH6ovERJ6q3qxZbRuWuxtww95J07b3t2/2Eb3e/R/zlX0/XJ/C88f/m2
 DkqngbOYqCdw+zJeN6k8631foyfUwAcTd0sJ1+5nsm5H4NE5NqObjbxOk5/yNht6
 HgvgISGHWLerEw+A/Dk6o0oZOtR1G/TAQ5qQk5nUfKT/sSoU+9/USsXtWhXwZCia
 XccnJgW6ZtPrJJP3zDnkrxe3gndmLic11QXArw2IhWTsq0sZlAyMgtauBXLdDiQa
 H/AMiYrUNmIABef1cirBLTtgXN4Zbsai9vIrxMmV7OgBrclrh52NTjzr05P5Hnl2
 fRK56mb6mP59LymI7n8fyXL8tHnbNwFvTaxuvrZmzcYbzL0l9DuPocJrrTHRSfhm
 GFfzfvLj0R66ZM4PthRSwz4H2v1FnlRcCkj5k/QjtBPlyzxtOnJveqve5umbrnb9
 T5mRmlAs4iYwLuKCVVNT
 =sIv/
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Features-wise, to me the most important this time is a rework of
  wakeup interrupts handling in the core that makes them work
  consistently across all of the available sleep states, including
  suspend-to-idle.  Many thanks to Thomas Gleixner for his help with
  this work.

  Second is an update of the generic PM domains code that has been in
  need of some care for quite a while.  Unused code is being removed, DT
  support is being added and domains are now going to be attached to
  devices in bus type code in analogy with the ACPI PM domain.  The
  majority of work here was done by Ulf Hansson who also has been the
  most active developer this time.

  Apart from this we have a traditional ACPICA update, this time to
  upstream version 20140828 and a few ACPI wakeup interrupts handling
  patches on top of the general rework mentioned above.  There also are
  several cpufreq commits including renaming the cpufreq-cpu0 driver to
  cpufreq-dt, as this is what implements generic DT-based cpufreq
  support, and a new DT-based idle states infrastructure for cpuidle.

  In addition to that, the ACPI LPSS driver is updated, ACPI support for
  Apple machines is improved, a few bugs are fixed and a few cleanups
  are made all over.

  Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
  maintained by Kevin Hilman that will be merged through the PM tree.

  Numbers-wise, the generic PM domains update takes the lead this time
  with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
  place goes to the wakeup interrupts handling rework (13 commits).

  Specifics:

   - Rework the handling of wakeup IRQs by the IRQ core such that all of
     them will be switched over to "wakeup" mode in suspend_device_irqs()
     and in that mode the first interrupt will abort system suspend in
     progress or wake up the system if already in suspend-to-idle (or
     equivalent) without executing any interrupt handlers.  Among other
     things that eliminates the wakeup-related motivation to use the
     IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
     need it and should not use it (Thomas Gleixner and Rafael Wysocki)

   - Switch over ACPI to handling wakeup interrupts with the help of the
     new mechanism introduced by the above IRQ core rework (Rafael Wysocki)

   - Rework the core generic PM domains code to eliminate code that's
     not used, add DT support and add a generic mechanism by which
     devices can be added to PM domains automatically during enumeration
     (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).

   - Add debugfs-based mechanics for debugging generic PM domains
     (Maciej Matraszek).

   - ACPICA update to upstream version 20140828.  Included are updates
     related to the SRAT and GTDT tables and the _PSx methods are in the
     METHOD_NAME list now (Bob Moore and Hanjun Guo).

   - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
     can't really be done in a straightforward way) to prevent
     Thunderbolt from being turned off on Apple systems after boot (or
     after resume from system suspend) and rework the ACPI Smart Battery
     Subsystem (SBS) driver to work correctly with Apple platforms
     (Matthew Garrett and Andreas Noever).

   - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
     adding support for 133MHz I2C source clock on Intel Baytrail to it
     and making it avoid using UART RTS override with Auto Flow Control
     (Heikki Krogerus).

   - ACPI backlight updates removing the video_set_use_native_backlight
     quirk which is not necessary any more, making the code check the
     list of output devices returned by the _DOD method to avoid
     creating acpi_video interfaces that won't work and adding a quirk
     for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)

   - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)

   - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
     Sudip Mukherjee, Yijing Wang, and Zhang Rui)

   - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
     Rasmus Villemoes)

   - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
     among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
     Murthy, Shilpasri G Bhat, Lucas Stach)

   - cpuidle support for DT-based idle states infrastructure, new ARM64
     cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
     Villemoes)

   - ARM big.LITTLE cpuidle driver updates: support for DT-based
     initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
     Kevin Hilman)

   - Rework of the test_suspend kernel command line argument and a new
     trace event for console resume (Srinivas Pandruvada, Todd E Brandt)

   - Second attempt to optimize swsusp_free() (hibernation core) to make
     it avoid going through all PFNs which may be way too slow on some
     systems (Joerg Roedel)

   - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).

   - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
     update in MAINTAINERS (Heiko Stübner, Kevin Hilman)

   - PM core fix related to clock management (Geert Uytterhoeven)

   - PM core's sysfs code cleanup (Johannes Berg)"

* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
  ACPI / fan: printk replacement
  PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
  PM / Domains: Rename cpu_data to cpuidle_data
  cpufreq: cpufreq-dt: fix potential double put of cpu OF node
  cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
  PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
  cpufreq: ppc-corenet: remove duplicate update of cpu_data
  ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
  PM / sleep: Rename platform suspend/resume functions in suspend.c
  PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
  ACPICA: Introduce acpi_enable_all_wakeup_gpes()
  ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
  ACPI / video: check _DOD list when creating backlight devices
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  cpufreq: Replace strnicmp with strncasecmp
  cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
  cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
  cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
  PM / devfreq: exynos: Enable building exynos PPMU as module
  PM / devfreq: Export helper functions for drivers
  ...
2014-10-09 16:07:43 -04:00
Bjorn Helgaas cc0cb67adb Merge branches 'pci/aer' and 'pci/virtualization' into next
* pci/aer:
  PCI/AER: Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND
  PCI/AER: Add additional PCIe AER error strings
  trace, RAS: Add additional PCIe AER error strings
  trace, RAS: Replace bare numbers with #defines for PCIe AER error strings

* pci/virtualization:
  PCI: Add ACS quirk for Intel 10G NICs
2014-10-01 12:30:58 -06:00
Chen, Gong d179111767 PCI/AER: Add additional PCIe AER error strings
Add strings for all AER error bits defined in PCIe r3.0.

[bhelgaas: changelog, drop designated initializer change]
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-25 09:42:40 -06:00
Rafael J. Wysocki fe9a743a26 PCI/PM: Drop unused runtime PM support code for PCIe ports
Since commit de7d5f729c ("PCI/PM: Disable runtime PM of PCIe ports") the
runtime PM support code for PCIe ports in portdrv_pci.c has never been
used, so drop it entirely.

If we are to support runtime PM of PCIe ports, it will have to be done in a
different way most likely anyway.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-02 17:12:15 -06:00
Rafael J. Wysocki 76cde7e495 PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle
To make PCIe PME interrupts wake up the system from suspend to idle,
make the PME driver use enable_irq_wake() on the IRQ during system
suspend (if there are any wakeup devices below the given PCIe port)
without disabling PME interrupts.  This way, an interrupt will still
trigger if a wakeup event happens and the system will be woken up (or
system suspend in progress will be aborted) by means of the new
mechanics introduced previously.

This change allows Wake-on-LAN to be used for wakeup from
suspend-to-idle on my MSI Wind tesbed netbook.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-01 13:49:16 +02:00
Linus Torvalds d782cebd6b Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle are:

   - RAS tracing/events infrastructure, by Gong Chen.

   - Various generalizations of the APEI code to make it available to
     non-x86 architectures, by Tomasz Nowicki"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ras: Fix build warnings in <linux/aer.h>
  acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
  acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
  apei, mce: Factor out APEI architecture specific MCE calls.
  RAS, extlog: Adjust init flow
  trace, eMCA: Add a knob to adjust where to save event log
  trace, RAS: Add eMCA trace event interface
  RAS, debugfs: Add debugfs interface for RAS subsystem
  CPER: Adjust code flow of some functions
  x86, MCE: Robustify mcheck_init_device
  trace, AER: Move trace into unified interface
  trace, RAS: Add basic RAS trace event
  x86, MCE: Kill CPU_POST_DEAD
2014-08-04 17:21:59 -07:00
Jiang Liu 7f105d3118 PCI/portdrv: Remove warning about invalid IRQ for hot-added PCIe ports
For hot-added PCIe ports on x86 platforms, we always warned about an
invalid IRQ, e.g.,

  pci 0000:00:00.0: device [8086:0e0b] has invalid IRQ; check vendor BIOS

This was because we check pci_dev->irq before actually allocating the IRQ
for the device, which happens in this path:

  pcie_port_device_register
    pci_enable_device
      pci_enable_device_flags
        do_pci_enable_device
          pcibios_enable_device    (on x86)
            pcibios_enable_irq

This warning message isn't generated for PCIe ports present at boot time
because x86 arch code has called acpi_pci_irq_enable() in pci_acpi_init()
for each PCI device for safety.

[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-02 15:14:34 -06:00
Chen, Gong 0a2409aad3 trace, AER: Move trace into unified interface
AER uses a separate trace interface by now. To make it
consistent, move it into unified RAS trace interface.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-23 10:12:29 -07:00
Ryan Desfosses 227f064705 PCI: Merge multi-line quoted strings
Merge quoted strings that are broken across lines into a single entity.
The compiler merges them anyway, but checkpatch complains about it, and
merging them makes it easier to grep for strings.

No functional change.

[bhelgaas: changelog, do the same for everything under drivers/pci]
Signed-off-by: Ryan Desfosses <ryan@desfo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-10 20:20:42 -06:00
Ryan Desfosses 3c78bc61f5 PCI: Whitespace cleanup
Fix various whitespace errors.

No functional change.

[bhelgaas: fix other similar problems]
Signed-off-by: Ryan Desfosses <ryan@desfo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-10 20:20:19 -06:00
Bjorn Helgaas 518a6a34f6 Merge branches 'pci/hotplug', 'pci/msi', 'pci/virtualization' and 'pci/misc' into next
* pci/hotplug:
  PCI: rphahp: Fix endianess issues
  PCI: Allow hotplug service drivers to operate in polling mode
  PCI: pciehp: Acknowledge spurious "cmd completed" event
  PCI: pciehp: Use PCI_EXP_SLTCAP_PSN define
  PCI: hotplug: Remove unnecessary "dev->bus" test

* pci/msi:
  GenWQE: Use pci_enable_msi_exact() instead of pci_enable_msi_block()
  PCI/MSI: Simplify populate_msi_sysfs()
  PCI/portdrv: Use pci_enable_msix_exact() instead of pci_enable_msix()

* pci/virtualization:
  PCI: Add Patsburg (X79) to Intel PCH root port ACS quirk

* pci/misc:
  PCI: Fix use of uninitialized MPS value
  PCI: Remove dead code
  MAINTAINERS: Add arch/x86/kernel/quirks.c to PCI file patterns
  PCI: Remove unnecessary __ref annotations
  PCI: Fail new_id for vendor/device values already built into driver
  PCI: Add new ID for Intel GPU "spurious interrupt" quirk
  PCI: Update my email address
  PCI: Fix incorrect vgaarb conditional in WARN_ON()
  PCI: Use designated initialization in PCI_VDEVICE
  PCI: Remove old serial device IDs
  PCI: Remove unnecessary includes of <linux/init.h>
  powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal
2014-04-29 17:43:58 -06:00
Rajat Jain 374a914043 PCI: Allow hotplug service drivers to operate in polling mode
Today the PCIe port bus driver disables the Hot-plug service if the port
device does not have the capability to generate interrupts.  However, a
user must be able to use the "pciehp_poll_mode" parameter to use the pciehp
in polling method in such a case.  Today it is not possible.

This patch allows a hotplug service driver to decide whether or not it
would like to continue in the absence of interrupts.

Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
Signed-off-by: Rajat Jain <rajatjain@juniper.net>
Signed-off-by: Guenter Roeck <groeck@juniper.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-24 16:47:46 -06:00
Alexander Gordeev 9ada07b110 PCI/portdrv: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers using these two
interfaces need to be updated to use the new pci_enable_msi_range()  or
pci_enable_msi_exact() and pci_enable_msix_range() or
pci_enable_msix_exact() interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-14 15:15:34 -06:00
Bjorn Helgaas 597db6f38c Merge branch 'pci/dead-code' into next
* pci/dead-code:
  PCI: Make local functions static
  PCI: Remove unused alloc_pci_dev()
  PCI: Remove unused pci_renumber_slot()
  PCI: Remove unused pcie_aspm_enabled()
  PCI: Remove unused pci_vpd_truncate()
  PCI: Remove unused ID-Based Ordering support
  PCI: Remove unused Optimized Buffer Flush/Fill support
  PCI: Remove unused Latency Tolerance Reporting support
  PCI: Removed unused parts of Page Request Interface support

Conflicts:
	drivers/pci/pci.c
	include/linux/pci.h
2014-01-13 16:47:08 -07:00
Bjorn Helgaas 6b9bd1e3ee Merge branch 'pci/aer' into next
* pci/aer:
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
2014-01-13 16:46:15 -07:00
Betty Dall 339c0fc586 PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
In the discussion for this set of patches [link below], Bjorn Helgaas
pointed out that the ACPI HEST AER error sources do not have the PCIe
segment number associated with the bus.  I worked with the ACPI spec and
got this change to definition of the "Bus" field into the recently released
ACPI Spec 5.0a section 18.3.2.3-5:

  Identifies the PCI Bus and Segment of the device.  The Bus is encoded in
  bits 0-7.  For systems that expose multiple PCI segment groups, the
  segment number is encoded in bits 8-23 and bits 24-31 must be zero.  For
  systems that do not expose multiple PCI segment groups, bits 8-31 must be
  zero.  If the GLOBAL flag is specified, this field is ignored.

This patch makes use of the new definition in the only place in the kernel
that uses the acpi_hest_aer_common's bus field.

This depends on 36f3615152 ("ACPICA: Add helper macros to extract
bus/segment numbers from HEST table.")

Link: http://lkml.kernel.org/r/1370542251-27387-1-git-send-email-betty.dall@hp.com
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13 12:18:55 -07:00