Commit Graph

208 Commits

Author SHA1 Message Date
Linus Torvalds 03b883840c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
  dlm: common max length definitions
  dlm: move plock code from gfs2
  dlm: recover nodes that are removed and re-added
  dlm: save master info after failed no-queue request
  dlm: make dlm_print_rsb() static
  dlm: match signedness between dlm_config_info and cluster_set
2008-04-22 13:44:23 -07:00
David Teigland 3d564fa347 dlm: common max length definitions
Add central definitions for max lockspace name length and max resource
name length.  The lack of central definitions has resulted in scattered
private definitions which we can now clean up, including an unused one
in dlm_device.h.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:22:29 -05:00
David Teigland 2402211a83 dlm: move plock code from gfs2
Move the code that handles cluster posix locks from gfs2 into the dlm
so that it can be used by both gfs2 and ocfs2.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:22:28 -05:00
David Teigland d44e0fc704 dlm: recover nodes that are removed and re-added
If a node is removed from a lockspace, and then added back before the
dlm is notified of the removal, the dlm will not detect the removal
and won't clear the old state from the node.  This is fixed by using a
list of added nodes so the membership recovery can detect when a newly
added node is already in the member list.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:18:01 -05:00
David Teigland 761b9d3ffc dlm: save master info after failed no-queue request
When a NOQUEUE request fails, the rsb res_master field is unnecessarily
reset to -1, instead of leaving the valid master setting in place.  We
want to save the looked-up master values while the rsb is on the "toss
list" so that another lookup can be avoided if the rsb is soon reused.
The fix is to simply leave res_master value alone.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:18:01 -05:00
Adrian Bunk 170e19ab29 dlm: make dlm_print_rsb() static
dlm_print_rsb() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:18:01 -05:00
Harvey Harrison 5416b704ae dlm: match signedness between dlm_config_info and cluster_set
cluster_set is only called from the macro CLUSTER_ATTR which defines read/write
access functions.  Make the signedness match to avoid sparse warnings every time
CLUSTER_ATTR is used (lines 149-159) all of the form:

fs/dlm/config.c:149:1: warning: incorrect type in argument 3 (different signedness)
fs/dlm/config.c:149:1:    expected unsigned int *info_field
fs/dlm/config.c:149:1:    got int extern [toplevel] *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:18:01 -05:00
Matthew Wilcox cb688371e2 fs: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:44 -04:00
David Teigland 599e0f584d dlm: fix rcom_names message to self
The recent patch to validate data lengths in rcom_names messages
failed to account for fake messages a node directs to itself before
ever sending it.  In this case we need to fill in the message length
in the header for the validation code to use.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-21 15:19:54 -06:00
Denis Cheng 30727174b6 dlm: add __init and __exit marks to init and exit functions
it moves 365 bytes from .text to .init.text, and 30 bytes from .text to
.exit.text, saves memory.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06 23:41:22 -06:00
David Teigland d292c0cc48 dlm: eliminate astparam type casting
Put lkb_astparam in a union with a dlm_user_args pointer to
eliminate a lot of type casting.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06 23:27:04 -06:00
David Teigland e5dae548b0 dlm: proper types for asts and basts
Use proper types for ast and bast functions, and use
consistent type for ast param.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06 00:35:45 -06:00
Al Viro cb79f1998d dlm: dlm/user.c input validation fixes
a) in device_write(): add sentinel NUL byte, making sure that lspace.name will
be NUL-terminated
b) in compat_input() be keep it simple about the amounts of data we are copying.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:30:19 -06:00
Al Viro 043b19cdc0 dlm: fix dlm_dir_lookup() handling of too long names
... those can happen and BUG() from DLM_ASSERT() in allocate_direntry() is
not a good way to handle them.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:30:19 -06:00
Al Viro a9cc915928 dlm: fix overflows when copying from ->m_extra to lvb
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:29:13 -06:00
Al Viro ef58bccab7 dlm: make find_rsb() fail gracefully when namelen is too large
We *can* get there from receive_request() and dlm_recover_master_copy()
with namelen too large if incoming request is invalid; BUG() from
DLM_ASSERT() in allocate_rsb() is a bit excessive reaction to that
and in case of dlm_recover_master_copy() we would actually oops before
that while calculating hash of up to 64Kb worth of data - with data
actually being 64 _bytes_ in kmalloc()'ed struct.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:26:31 -06:00
Al Viro a5dd06313d dlm: receive_rcom_lock_args() overflow check
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:25:58 -06:00
Al Viro ae773d0b74 dlm: verify that places expecting rcom_lock have packet long enough
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:25:09 -06:00
Al Viro cd9df1aac3 dlm: validate data in dlm_recover_directory()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:24:52 -06:00
Al Viro 02ed16b64d dlm: missing length check in check_config()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:24:20 -06:00
Al Viro 4007685c6e dlm: use proper type for ->ls_recover_buf
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:24:07 -06:00
Al Viro 93ff2971e9 dlm: do not byteswap rcom_config
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:23:43 -06:00
Al Viro 163a1859ec dlm: do not byteswap rcom_lock
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:23:14 -06:00
Al Viro eef7d739c2 dlm: dlm_process_incoming_buffer() fixes
* check that length is large enough to cover the non-variable part of message or
  rcom resp. (after checking that it's large enough to cover the header, of
  course).

* kill more pointless casts

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:22:42 -06:00
Al Viro 8b0d8e03f8 dlm: use proper C for dlm/requestqueue stuff (and fix alignment bug)
a) don't cast the pointer to dlm_header *, we use it as dlm_message *
   anyway.
b) we copy the message into a queue element, then pass the pointer to
   copy to dlm_receive_message_saved(); declare it properly to make sure
   that we have the right alignment.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04 01:21:32 -06:00
Denis Cheng 0fe410d3f3 dlm: static initialization improvements
also change name_prefix from char pointer to char array.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland dbcfc34733 dlm: clean ups
A couple small clean-ups.  Remove unnecessary wrapper-functions in
rcom.c, and remove unnecessary casting and an unnecessary ASSERT in
util.c.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
Patrick Caulfeld 2a79289e87 dlm: Sanity check namelen before copying it
The 32/64 compatibility code in the DLM does not check the validity of
the lock name length passed into it, so it can easily overwrite memory
if the value is rubbish (as early versions of libdlm can cause with
unlock calls, it doesn't zero the field).

This patch restricts the length of the name to the amount of data
actually passed into the call.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland 85f0379aa0 dlm: keep cached master rsbs during recovery
To prevent the master of an rsb from changing rapidly, an unused rsb is kept
on the "toss list" for a period of time to be reused.  The toss list was
being cleared completely for each recovery, which is unnecessary.  Much of
the benefit of the toss list can be maintained if nodes keep rsb's in their
toss list that they are the master of.  These rsb's need to be included
when the resource directory is rebuilt during recovery.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland 594199ebaa dlm: change error message to debug
The invalid lockspace messages are normal and can appear relatively
often.  They should be suppressed without debugging enabled.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland ce5246b972 dlm: fix possible use-after-free
The dlm_put_lkb() can free the lkb and its associated ua structure,
so we can't depend on using the ua struct after the put.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 755b5eb8ba dlm: limit dir lookup loop
In a rare case we may need to repeat a local resource directory lookup
due to a race with removing the rsb and removing the resdir record.
We'll never need to do more than a single additional lookup, though,
so the infinite loop around the lookup can be removed.  In addition
to being unnecessary, the infinite loop is dangerous since some other
unknown condition may appear causing the loop to never break.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 42dc1601a9 dlm: reject normal unlock when lock is waiting for lookup
Non-forced unlocks should be rejected if the lock is waiting on the
rsb_lookup list for another lock to establish the master node.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland c54e04b00f dlm: validate messages before processing
There was some hit and miss validation of messages that has now been
cleaned up and unified.  Before processing a message, the new
validate_message() function checks that the lkb is the appropriate type,
process-copy or master-copy, and that the message is from the correct
nodeid for the the given lkb.  Other checks and assertions on the
lkb type and nodeid have been removed.  The assertions were particularly
bad since they would panic the machine instead of just ignoring the bad
message.

Although other recent patches have made processing old message unlikely,
it still may be possible for an old message to be processed and caught
by these checks.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 46b43eed70 dlm: reject messages from non-members
Messages from nodes that are no longer members of the lockspace should be
ignored.  When nodes are removed from the lockspace, recovery can
sometimes complete quickly enough that messages arrive from a removed node
after recovery has completed.  When processed, these messages would often
cause an error message, and could in some cases change some state, causing
problems.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland aec64e1be2 dlm: another call to confirm_master in receive_request_reply
When a failed request (EBADR or ENOTBLK) is unlocked/canceled instead of
retried, there may be other lkb's waiting on the rsb_lookup list for it
to complete.  A call to confirm_master() is needed to move on to the next
waiting lkb since the current one won't be retried.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 601342ce02 dlm: recover locks waiting for overlap replies
When recovery looks at locks waiting for replies, it fails to consider
locks that have already received a reply for their first remote operation,
but not received a reply for secondary, overlapping unlock/cancel.  The
appropriate stub reply needs to be called for these waiters.

Appears when we start doing recovery in the presence of a many overlapping
unlock/cancel ops.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 8a358ca8e7 dlm: clear ast_type when removing from astqueue
The lkb_ast_type field indicates whether the lkb is on the astqueue list.
When clearing locks for a process, lkb's were being removed from the astqueue
list without clearing the field.  If release_lockspace then happened
immediately afterward, it could try to remove the lkb from the list a second
time.

Appears when process calls libdlm dlm_release_lockspace() which first
closes the ls dev triggering clear_proc_locks, and then removes the ls
(a write to control dev) causing release_lockspace().

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland 861e2369e9 dlm: use fixed errno values in messages
Some errno values differ across platforms. So if we return things like
-EINPROGRESS from one node it can get misinterpreted or rejected on
another one.

This patch fixes up the errno values passed on the wire so that they
match the x86 ones (so as not to break the protocol), and re-instates
the platform-specific ones at the other end.

Many thanks to Fabio for testing this patch.
Initial patch from Patrick.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
Fabio M. Di Nitto 550283e30c dlm: swap bytes for rcom lock reply
DLM_RCOM_LOCK_REPLY messages need byte swapping.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:41 -06:00
Fabio M. Di Nitto e7847d35ac dlm: align midcomms message buffer
gcc does not guarantee that an auto buffer is 64bit aligned.
This change allows sparc64 to work.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:25 -06:00
Patrick Caulfeld 39bd4177dd dlm: close othercons
This patch addresses a problem introduced with the last round of
lowcomms patches where the 'othercon' connections do not get freed when
the DLM shuts down.

This results in the error message
"slab error in kmem_cache_destroy(): cache `dlm_conn': Can't free all
objects"

and the DLM cannot be restarted without a system reboot.

See bz#428119

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:32 -06:00
David Teigland 52bda2b5ba dlm: use dlm prefix on alloc and free functions
The dlm functions in memory.c should use the dlm_ prefix.  Also, use
kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:19 -06:00
David Teigland 11b2498ba7 dlm: don't print common non-errors
Change log_error() to log_debug() for conditions that can occur in
large number in normal operation.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:08 -06:00
Adrian Bunk e028398da7 dlm: proper prototypes
This patch adds a proper prototype for some functions in
fs/dlm/dlm_internal.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:16:52 -06:00
Lon Hohberger 6bd8fedaa1 dlm: bind connections from known local address when using TCP
A common problem occurs when multiple IP addresses within the same
subnet are assigned to the same NIC.  If we make a connection attempt to
another address on the same subnet as one of those addresses, the
connection attempt will not necessarily be routed from the address we
want.

In the case of the DLM, the other nodes will quickly drop the connection
attempt, causing problems.

This patch makes the DLM bind to the local address it acquired from the
cluster manager when using TCP prior to making a connection, obviating
the need for administrators to "fix" their systems or use clever routing
tricks.

Signed-off-by: Lon Hohberger <lhh@redhat.com>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 16:44:25 -06:00
Greg Kroah-Hartman 197b12d679 Kobject: convert fs/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman 901195ed7f Kobject: change GFS2 to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:26 -08:00
Greg Kroah-Hartman 0ff21e4663 kobject: convert kernel_kset to be a kobject
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.

We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman bd35b93d80 kset: convert kernel_subsys to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename kernel_subsys to kernel_kset to catch all users of this symbol
with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00