Commit Graph

2594 Commits

Author SHA1 Message Date
Linus Torvalds 561a8eb3e1 RTC for 4.14
Subsystem:
  - Remove .open() and .release() RTC ops
  - constify i2c_device_id
 
 New driver:
  - Realtek RTD1295
  - Android emulator (goldfish) RTC
 
 Drivers:
  - ds1307: Beginning of a huge cleanup
  - s35390a: handle invalid RTC time
  - sun6i: external oscillator gate support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlm5YTcACgkQAyWl4gNJ
 NJKetg//Xz4zK3O1uhfz1/yWOSqbBwYxUvHzSDFuD3FtAskFPPFACgJENkj98DMF
 w6nCqq/TXOY+BpqPTebzc68vvHGCvZ/AEKPzvCV1KciQ+ACMFGxH8xHCLox9AdyL
 VtcWftPPwu3W6oNN1azV++XgVtComzfEi4pTcTXdw9EDA5yBK/Xyg3xWZ1QV/Xs5
 /DFCcY69nhaJxmD/To0csmI1KbMbiprvN0vJHtF589Y4KhBfnlZnq3bAx2Coo1kv
 PpPy0e0kLzzlWMtMsiM6I3w5iwuf5o1Vajcg5ylAK0Wjvfgh7DqYX0ZQySw/5eZT
 f1OCqP0GVSugmJ8SFMVxYbXPGgpUETtT6ztB9fsAYdUye3I/xfqmip3A7vcFlrAb
 /R1gTZOyx/uwv3qVRsx0LJVxJQJ7vq/3dJYFiQo80AbPyY+GQT3xPr3z33DcJYJt
 2CL0pd6NfEzgesuVCnpZxF+wNJ+449Jzmxge5klqH1rYQ/IjOXS0qAg5pQRUaRjC
 CGNkjBWT82HN1Y8G++4FpdmHLUjkO07QyAAZiYvHNXX3aMcyl8Az/2kcrl+yq7tl
 03CxveLD8kP1bVsRMEIbx24l4lB93U5HyFTeli9xjBMbxDrBK2NZXCD7g/yI/sbs
 ryUe5W33Xgxm0DJ9CXts0qOf/ommiBoogYk+oxe+AGWdLR1weRo=
 =Xkx1
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - remove .open() and .release() RTC ops
   - constify i2c_device_id

  New driver:
   - Realtek RTD1295
   - Android emulator (goldfish) RTC

  Drivers:
   - ds1307: Beginning of a huge cleanup
   - s35390a: handle invalid RTC time
   - sun6i: external oscillator gate support"

* tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
  rtc: ds1307: use octal permissions
  rtc: ds1307: fix braces
  rtc: ds1307: fix alignments and blank lines
  rtc: ds1307: use BIT
  rtc: ds1307: use u32
  rtc: ds1307: use sizeof
  rtc: ds1307: remove regs member
  rtc: Add Realtek RTD1295
  dt-bindings: rtc: Add Realtek RTD1295
  rtc: sun6i: Add support for the external oscillator gate
  rtc: goldfish: Add RTC driver for Android emulator
  dt-bindings: Add device tree binding for Goldfish RTC driver
  rtc: ds1307: add basic support for ds1341 chip
  rtc: ds1307: remove member nvram_offset from struct ds1307
  rtc: ds1307: factor out offset to struct chip_desc
  rtc: ds1307: factor out rtc_ops to struct chip_desc
  rtc: ds1307: factor out irq_handler to struct chip_desc
  rtc: ds1307: improve irq setup
  rtc: ds1307: constify struct chip_desc variables
  rtc: ds1307: improve trickle charger initialization
  ...
2017-09-13 10:56:00 -07:00
Alexandre Belloni b4be271ceb rtc: ds1307: use octal permissions
Octal permissions are preferred over symbolic permissions.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:05 +02:00
Alexandre Belloni e69c056714 rtc: ds1307: fix braces
Fix unnecessary or unbalanced braces.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:05 +02:00
Alexandre Belloni 4057a66e53 rtc: ds1307: fix alignments and blank lines
Alignment should always match open parenthesis.
Also remove two unnecessary blank lines

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:05 +02:00
Alexandre Belloni eb4fd19005 rtc: ds1307: use BIT
Use the BIT macro were possbiel.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:04 +02:00
Alexandre Belloni 57ec2d9580 rtc: ds1307: use u32
u32 should be used instead of uint32_t

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:04 +02:00
Alexandre Belloni f2b4801201 rtc: ds1307: use sizeof
Use sizeof where possible to ensure we don't read/write more than the
allocated buffer.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:03 +02:00
Alexandre Belloni 042fa8c7c0 rtc: ds1307: remove regs member
ds1307->regs is never used before being read or initialized locally. There
is no point in keeping a copy in memory.

Also limit the size of the read buffer to what is really used, rename buf
to regs for consistency and use sizeof() where possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:03 +02:00
Andreas Färber ae930c912b rtc: Add Realtek RTD1295
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and
mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.

The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and
Beelink Lake I.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:02 +02:00
Lee Jones 3f979bf8f5 Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged 2017-09-05 08:45:36 +01:00
Wolfram Sang a205425658 mfd: twl: Move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-04 14:41:02 +01:00
Maxime Ripard 17ecd24641 rtc: sun6i: Add support for the external oscillator gate
The RTC can output its 32kHz clock outside of the SoC, for example to clock
a WiFi chip.

Create a new clock that other devices will be able to retrieve, while
maintaining the DT stability by providing a default name for that clock if
clock-output-names doesn't list one.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:19 +02:00
Miodrag Dinic f22d9cdcb5 rtc: goldfish: Add RTC driver for Android emulator
Add device driver for a virtual RTC device in Android emulator.

The compatible string used by OS for binding the driver is defined
as "google,goldfish-rtc".

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:18 +02:00
Nikita Yushchenko 0759c886f4 rtc: ds1307: add basic support for ds1341 chip
This adds support for reading and writing date/time from/to ds1341 chip.

ds1341 chip has other features - alarms, input clock (can be used instead
of intercal oscillator for better accuracy), output clock ("square wave
generation"). However, not all of that is available at the same time.
Same chip pins, CLKIN/nINTA and SQW/nINTB, can be used either for
input/output clocks, or for alarm interrupts. Role of these pins on
particular board depends on hardware wiring.

We can add device tree properties that describe if each of pins is wired
as clock, or as interrupt, or left unconnected, and enable support for
corresponding functionality based on that. But that is cumbersome, requires
hardware for testing, and has to deal with bit enabling/disabling output
clock also affects which pins alarm interrupts are routed to.

Another factor is that there are hardware setups (i.e. ZII RDU2) that
power DS1341 from SuperCap, which makes power saving critical. For such
setups, kernel driver should leave register bits that control mentioned
pins in the state configured by bootloader.

Given all that, it was decided to limit support to "only date/time" for
now. That is enough for common use case. Full (and cumbersome)
implementation can be added later if ever needed.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:18 +02:00
Heiner Kallweit 969fa07b94 rtc: ds1307: remove member nvram_offset from struct ds1307
Remove member nvram_offset from struct ds1307 and use the value stored
in struct chip_desc directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:17 +02:00
Heiner Kallweit e553170a59 rtc: ds1307: factor out offset to struct chip_desc
Factor out offset to struct chip_desc and remove it from struct ds1307.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:17 +02:00
Heiner Kallweit 1efb98ba5e rtc: ds1307: factor out rtc_ops to struct chip_desc
Factor out rtc_ops to struct chip_desc and use ds13xx_rtc_ops as default.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:16 +02:00
Heiner Kallweit 4594712705 rtc: ds1307: factor out irq_handler to struct chip_desc
Factor out irq_handler to struct chip_desc and use ds1307_irq as default.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:16 +02:00
Heiner Kallweit 82e2d43f63 rtc: ds1307: improve irq setup
Change the usage of variable want_irq to reflect its name. Don't set
it to true in case wakeup is enabled but no interrupt number is given.
In addition set variable ds1307_can_wakeup_device if chip->alarm
is set only.
This allows to simplify the code and make it better understandable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:15 +02:00
Heiner Kallweit 7624df482d rtc: ds1307: constify struct chip_desc variables
Constify struct chip_desc variables.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:14 +02:00
Heiner Kallweit d8490fd55a rtc: ds1307: improve trickle charger initialization
Instead of storing the trickle_charger_setup value in struct chip_desc
we can let function ds1307_trickle_init return it because it's used
in the probe function only.
This allows us to constify struct chip_desc variables in a next step.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:13 +02:00
Heiner Kallweit 0b6ee80594 rtc: ds1307: factor out bbsqi bit to struct chip_desc
Factor out the bbsqi bit to struct chip_desc.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:13 +02:00
Heiner Kallweit 340fd7bce0 rtc: ds1307: remove member irq from struct ds1307
The irq number is used in the probe function only, so we don't have
to store it in struct ds1307.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:12 +02:00
Elaine Zhang 79c676c4e3 rtc: rk808: Name RK805 in Kconfig for RTC_DRV_RK808
The RK808 and RK805 PMICs are using a similar register map.
We can reuse the rtc driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:12 +02:00
Arvind Yadav 45a6351849 rtc: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:11 +02:00
Alexandre Belloni ea369ea6d8 rtc: remove .open() and .release()
There are no driver left using .open and .release. There is no good use
case for them as there is nothing the character device interface does that
should not be done in the sysfs interface or in-kernel interface.

Remove those callbacks now to avoid future confusion.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 16:34:51 +02:00
Alexandre Belloni 604c78235a rtc: mxc: avoid disabling interrupts on device close
Currently, the IRQs are disabled when the rtc character device is closed.
This means that the device needs to stay open to get alarms while the usual
use case will open the device, set the alarm and close the device as is
done in rtcwake.

Keep the alarm functional on character device release so the platform can
actually wakeup.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 16:23:16 +02:00
Alexandre Belloni 0a53a16722 rtc: vr41xx: make alarms useful
Currently, the IRQs are disabled when the rtc character device is closed.
This means that the device needs to stay open to get alarms while the usual
use case will open the device, set the alarm and close the device.

Keep the alarms functional on character device release. Note that the PIE
are never enabled and would anyway be disabled by the core.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:36 +02:00
Alexandre Belloni 512053a43d rtc: sa1100: make alarms useful
Currently, the driver unregisters the IRQs when the rtc character device is
closed. This means that the device needs to stay open to get alarms while
the usual use case will open the device, set the alarm and close the
device.

Move the IRQ requests to sa1100_rtc_probe() and use the devm managed
versions so we don't need to free them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:35 +02:00
Alexandre Belloni 1cf85b2327 rtc: sa1100: fix unbalanced clk_prepare_enable/clk_disable_unprepare
In the error path of sa1100_rtc_open(), info->clk is disabled which will
happen again in sa1100_rtc_remove() when the module is removed whereas it
is only enabled once in sa1100_rtc_init().

Fixes: 0cc0c38e91 ("drivers/rtc/rtc-sa1100.c: move clock enable/disable to probe/remove")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:35 +02:00
Alexandre Belloni 56c0c52984 rtc: pxa: fix possible race condition
pxa_rtc_open() registers the interrupt handler which will access the RTC
registers. However, pxa_rtc_open() is called before the register range is
ioremapped. Instead, call it after devm_ioremap().

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:34 +02:00
Alexandre Belloni be8e274646 rtc: m41t80: remove debug sysfs attribute
The last remaining sysfs attribute is undocumented and useless as it can
only be used to debug the driver. Remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:34 +02:00
Eric Cooper d4473b9b77 rtc: m41t80: enable wakealarm when "wakeup-source" is specified
Don't require an IRQ if the wakeup-source device-tree property is present.

Signed-off-by: Eric Cooper <ecc@cmu.edu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24 11:03:34 +02:00
Alexandre Belloni 60d3455211 rtc: puv3: make alarms useful
Currently, the driver unregisters the IRQs when the rtc character device is
closed. This means that the device needs to stay open to get alarms while
the usual use case will open the device, set the alarm and close the
device.

Move the IRQ requests to puv3_rtc_probe() and use the devm managed versions
so we don't need to free them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-22 12:05:21 +02:00
Alexandre Belloni 5539ba54b3 rtc: puv3: switch to devm_rtc_allocate_device()/rtc_register_device()
Use managed RTC device allocation as this allows for further cleanup.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-22 12:05:20 +02:00
Heiner Kallweit 03619844d8 rtc: ds1307: fix regmap config
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b53 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-21 11:08:03 +02:00
Wolfram Sang 0335a9554b mfd: dm355evm_msp: Move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-15 08:06:14 +01:00
Colin Ian King 2f7f1b780d rtc: max8925: remove redundant check on ret
The check on ret < 0 is redundant as the goto destination is the
next statment.  Remove this redudant check and goto.

Detected by CoverityScan, CID#1268785 ("Identical code for different
branches")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:48 +02:00
Colin Ian King 1a37c34811 rtc: sun6i: ensure clk_data is kfree'd on error
There are two error return paths that do not kfree clk_data and
we end up with a memory leak. Fix these with a kfree error exit
path.

Detected by CoverityScan, CID#1402959 ("Resource Leak")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:46 +02:00
Alexey Klimov 319ff835d6 rtc: sun6i: Remove double init of spinlock in sun6i_rtc_clk_init()
Remove double init of spinlock in sun6i_rtc_clk_init()

Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator")
Signed-off-by: Alexey Klimov <alexey.klimov@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:46 +02:00
Heiner Kallweit 11909f0be7 rtc: ds1307: remove legacy check for "isil, irq2-can-wakeup-machine" property
Commit 8b44f5be20 ("ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property")
removed the last usage of "isil,irq2-can-wakeup-machine" almost
two years ago. So I think we can get rid of supporting this
legacy binding.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:45 +02:00
Fabien Lahoudere 7a1fe407fc rtc: s35390a: implement ioctls
Implements RTC_VL_READ and RTC_VL_CLR ioctls.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:44 +02:00
Fabien Lahoudere 16486d0c1c rtc: s35390a: handle invalid RTC time
If RTC time have been altered by low voltage, we notify users
that RTC time is invalid by returning -EINVAL.
The RTC time needs to be set correctly to clear the invalid flag.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31 00:17:39 +02:00
Linus Torvalds 3a00be1923 RTC for 4.13
Subsystem:
  - expose non volatile RAM using nvmem instead of open coding in many
  drivers. Unfortunately, this option has to be enabled by default to not
  break existing users.
  - rtctest can now test for cutoff dates, showing when an RTC will start
  failing to properly save time and date.
  - new RTC registration functions to remove race conditions in drivers
 
 Newly supported RTCs:
  - Broadcom STB wake-timer
  - Epson RX8130CE
  - Maxim IC DS1308
  - STMicroelectronics STM32H7
 
 Drivers:
  - ds1307: use regmap, use nvmem, more cleanups
  - ds3232: temperature reading support
  - gemini: renamed to ftrtc010
  - m41t80: use CCF to expose the clock
  - rv8803: use nvmem
  - s3c: many cleanups
  - st-lpc: fix y2106 bug
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAllnMUIACgkQAyWl4gNJ
 NJJGNxAAqMTrggkF6KTvFCVAoMHdkeAxuoyigwCH8BCm2gOm5Qj8ZodZxndcl3Gb
 dWG+c1pHf4KXrz59h6ZGI4qFgIpCyJpjGpyJs0Pvt6gY7YIqHrEa1nvcrPO7DaWw
 fPPcszyiymDOsb6d+wJzriA2ISJUHy7Kf6FUb0fjQLoYNl7ezgzdV6+dvePOPcW1
 kaAfRX8XqrkECrDFFHlX1Szb78qGhcUB1TmWFW+hadICTguBLX/fro0DKWRw2POQ
 y3cHKqMzFhTD1+jkp26o535x/D9CWDXzLmLvRF5tBQ0X7V2UIGchj4aNEHT0Ruwx
 YlGzB3WDwfj/Jl+VALmY27mplf71z5ppJRhaFn84OWrJmvjS/2EF9TCCBc4XvzzX
 dH/5nvPyNrUYnayTTCXiPhN3p4ivywHXqA9gkHcWb3BagNIpuvwNVnJT/Sxz3Y5R
 Gt2zGl07NKQ1EtEThQEIBOMXy9nJ2PVJdQFmLehj1PfxX+Gbs42tWBILzl4n1rgT
 yUFLMGw1Y0/h39jw7t+uKM7v0aXPHOXLrwaDKIj+c4ffVXD8IALhgG7BL4dOQPSF
 rRPKi5QNYJMnuBeKHJrFlq7xWqHRVUfTFh16eyYvwGLGWiUuGe9akhlabl6bE8jG
 fm3TlHPNieGMObXijwEVePkY6z7E0CLE+d1iQsDK6ZgO/z3pdOo=
 =QDxE
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Here is the pull-request for the RTC subsystem for 4.13.

  Subsystem:

   - expose non volatile RAM using nvmem instead of open coding in many
     drivers. Unfortunately, this option has to be enabled by default to
     not break existing users.

   - rtctest can now test for cutoff dates, showing when an RTC will
     start failing to properly save time and date.

   - new RTC registration functions to remove race conditions in drivers

  Newly supported RTCs:

   - Broadcom STB wake-timer

   - Epson RX8130CE

   - Maxim IC DS1308

   - STMicroelectronics STM32H7

  Drivers:

   - ds1307: use regmap, use nvmem, more cleanups

   - ds3232: temperature reading support

   - gemini: renamed to ftrtc010

   - m41t80: use CCF to expose the clock

   - rv8803: use nvmem

   - s3c: many cleanups

   - st-lpc: fix y2106 bug"

* tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
  rtc: Remove wrong deprecation comment
  nvmem: include linux/err.h from header
  rtc: st-lpc: make it robust against y2038/2106 bug
  rtc: rtctest: add check for problematic dates
  tools: timer: add rtctest_setdate
  rtc: ds1307: remove ds1307_remove
  rtc: ds1307: use generic nvmem
  rtc: ds1307: switch to rtc_register_device
  rtc: rv8803: remove rv8803_remove
  rtc: rv8803: use generic nvmem support
  rtc: rv8803: switch to rtc_register_device
  rtc: add generic nvmem support
  rtc: at91rm9200: remove race condition
  rtc: introduce new registration method
  rtc: class separate id allocation from registration
  rtc: class separate device allocation from registration
  rtc: stm32: add STM32H7 RTC support
  dt-bindings: rtc: stm32: add support for STM32H7
  rtc: ds1307: add ds1308 variant
  rtc: ds3232: add temperature support
  ...
2017-07-13 12:15:06 -07:00
Benjamin Gaignard f4b82d39e4 rtc: st-lpc: make it robust against y2038/2106 bug
Make driver use u64 variables and functions to be sure that
it will support dates after year 2038.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-09 22:32:18 +02:00
Alexandre Belloni bed8e28047 rtc: ds1307: remove ds1307_remove
ds1307_remove() is now empty, remove it

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:25 +02:00
Alexandre Belloni abc925f72c rtc: ds1307: use generic nvmem
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:23 +02:00
Alexandre Belloni 69b119a642 rtc: ds1307: switch to rtc_register_device
This removes a possible race condition and crash and allows for further
improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:21 +02:00
Alexandre Belloni 2a52482ffb rtc: rv8803: remove rv8803_remove
rv8803_remove() is now empty, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:19 +02:00
Alexandre Belloni 16d70a78b4 rtc: rv8803: use generic nvmem support
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:18 +02:00