Commit Graph

103 Commits

Author SHA1 Message Date
Jeff Layton 0b8f18e358 cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget

Rather than allocating an inode and filling it out, have
cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means
a pretty hefty reorganization of cifs_get_inode_info.

For the readdir codepath, add a couple of new functions for filling out
cifs_fattr's from different FindFile response infolevels.

Finally, remove cifs_new_inode since there are no more callers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-09 23:05:48 +00:00
Jeff Layton 3bbeeb3c93 cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls

When there's an open filehandle, SET_FILE_INFO is apparently preferred
over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC
infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the
new call when there's an open filehandle available.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-09 21:15:10 +00:00
Jeff Layton 01ea95e3b6 cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo

...in preparation of adding a SET_FILE_INFO variant.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-09 21:15:02 +00:00
Jeff Layton cc0bad7552 cifs: add new cifs_iget function and convert unix codepath to use it
cifs: add new cifs_iget function and convert unix codepath to use it

In order to unify some codepaths, introduce a common cifs_fattr struct
for storing inode attributes. The different codepaths (unix, legacy,
normal, etc...) can fill out this struct with inode info. It can then be
passed as an arg to a common set of routines to get and update inodes.

Add a new cifs_iget function that uses iget5_locked to identify inodes.
This will compare inodes based on the uniqueid value in a cifs_fattr
struct.

Rather than filling out an already-created inode, have
cifs_get_inode_info_unix instead fill out cifs_fattr and hand that off
to cifs_iget. cifs_iget can then properly look for hardlinked inodes.

On the readdir side, add a new cifs_readdir_lookup function that spawns
populated dentries. Redefine FILE_UNIX_INFO so that it's basically a
FILE_UNIX_BASIC_INFO that has a few fields wrapped around it. This
allows us to more easily use the same function for filling out the fattr
as the non-readdir codepath.

With this, we should then have proper hardlink detection and can
eventually get rid of some nasty CIFS-specific hacks for handing them.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-01 21:26:42 +00:00
Jeff Layton 1e68b2b275 cifs: add new routine for converting AF_INET and AF_INET6 addrs
...to consolidate some logic used in more than one place.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-13 08:17:30 +00:00
Christoph Hellwig 1bf4072da6 cifs: reorganize get_cifs_acl
Thus spake Christoph:

"But this whole set_cifs_acl function is a real mess anyway and needs
some splitting up."

With this change too, it's possible to call acl_to_uid_mode() with a
NULL inode pointer. That (or something close to it) will eventually be
necessary when cifs_get_inode_info is reorganized.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-28 17:08:02 +00:00
Jeff Layton c4a2c08db7 cifs: make cnvrtDosUnixTm take a little-endian args and an offset
The callers primarily end up converting the args from le anyway. Also,
most of the callers end up needing to add an offset to the result. The
exception to these rules is cnvrtDosCifsTm, but there are no callers of
that function, so we might as well remove it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-28 14:57:20 +00:00
Jeff Layton 07119a4df8 cifs: have cifs_NTtimeToUnix take a little-endian arg
...and just have the function call le64_to_cpu.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-28 14:32:31 +00:00
Jeff Layton f58841666b cifs: change cifs_get_name_from_search_buf to use new unicode helper
...and remove cifs_convertUCSpath. There are no more callers. Also add a
#define for the buffer used in the readdir path so that we don't have so
many magic numbers floating around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 15:45:01 +00:00
Jeff Layton 460b96960d cifs: change CIFSSMBUnixQuerySymLink to use new helpers
Change CIFSSMBUnixQuerySymLink to use the new unicode helper functions.
Also change the calling conventions so that the allocation of the target
name buffer is done in CIFSSMBUnixQuerySymLink rather than by the caller.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-30 15:45:00 +00:00
Steve French c6c00919ab [CIFS] Rename compose_mount_options to cifs_compose_mount_options.
Make it available to others for reuse.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-18 05:50:07 +00:00
Steve French 7fc8f4e95b [CIFS] reopen file via newer posix open protocol operation if available
If the network connection crashes, and we have to reopen files, preferentially
use the newer cifs posix open protocol operation if the server supports it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French b298f22355 [CIFS] Send SMB flush in cifs_fsync
In contrast to the now-obsolete smbfs, cifs does not send SMB_COM_FLUSH
in response to an explicit fsync(2) to guarantee that all volatile data
is written to stable storage on the server side, provided the server
honors the request (which, to my knowledge, is true for Windows and
Samba with 'strict sync' enabled).
This patch modifies the cifs_fsync implementation to restore the
fsync-behavior of smbfs by triggering SMB_COM_FLUSH after sending
outstanding data on the client side to the server.

Signed-off-by: Horst Reiterer <horst.reiterer@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Jeff Layton 44f68fadd8 cifs: posix fill in inode needed by posix open
function needed to prepare for posix open

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:08 +00:00
Jeff Layton 950ec52880 cifs: properly handle case where CIFSGetSrvInodeNumber fails
...if it does then we pass a pointer to an unintialized variable for
the inode number to cifs_new_inode. Have it pass a NULL pointer instead.

Also tweak the function prototypes to reduce the amount of casting.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:08 +00:00
Jeff Layton 132ac7b77c cifs: refactor new_inode() calls and inode initialization
Move new inode creation into a separate routine and refactor the
callers to take advantage of it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:07 +00:00
Igor Mammedov e4cce94c9c [CIFS] Prevent OOPs when mounting with remote prefixpath.
Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'.
Checks if the prefixpath in an accesible while we are still in cifs_mount
and fails with reporting a error if we can't access the prefixpath

Should fix Samba bugs 6086 and 5861 and kernel bug 12192

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:36:21 +00:00
Jeff Layton 0496e02d87 cifs: turn smb_send into a wrapper around smb_sendv
cifs: turn smb_send into a wrapper around smb_sendv

Rename smb_send2 to smb_sendv to make it consistent with kernel naming
conventions for functions that take a vector.

There's no need to have 2 functions to handle sending SMB calls. Turn
smb_send into a wrapper around smb_sendv. This also allows us to
properly mark the socket as needing to be reconnected when there's a
partial send from smb_send.

Also, in practice we always use the address and noblocksnd flag
that's attached to the TCP_Server_Info. There's no need to pass
them in as separate args to smb_sendv.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:12 +00:00
Linus Torvalds 54a696bd07 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
  [CIFS] Remove redundant test
  [CIFS] make sure that DFS pathnames are properly formed
  Remove an already-checked error condition in SendReceiveBlockingLock
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  [CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
  Slightly streamline SendReceive[2]
  Check the return value of cifs_sign_smb[2]
  [CIFS] Cleanup: Move the check for too large R/W requests
  [CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
  Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
  [CIFS] In SendReceive, move consistency check out of the mutexed region
  cifs: store password in tcon
  cifs: have calc_lanman_hash take more granular args
  cifs: zero out session password before freeing it
  cifs: fix wait_for_response to time out sleeping processes correctly
  [CIFS] Can not mount with prefixpath if root directory of share is inaccessible
  [CIFS] various minor cleanups pointed out by checkpatch script
  [CIFS] fix typo
  [CIFS] remove sparse warning
  ...

Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.
2008-12-28 12:37:14 -08:00
Jeff Layton 4e53a3fb98 cifs: have calc_lanman_hash take more granular args
cifs: have calc_lanman_hash take more granular args

We need to use this routine to encrypt passwords associated with the
tcon too. Don't assume that the password will be attached to the
smb_session.

Also, make some of the values in the lower encryption functions
const since they aren't changed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-26 02:29:11 +00:00
David Howells a001e5b558 CRED: Wrap task credential accesses in the CIFS filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs-client@lists.samba.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:47 +11:00
Steve French edf1ae4038 [CIFS] Reduce number of socket retries in large write path
CIFS in some heavy stress conditions cifs could get EAGAIN
repeatedly in smb_send2 which led to repeated retries and eventually
failure of large writes which could lead to data corruption.

There are three changes that were suggested by various network
developers:

1) convert cifs from non-blocking to blocking tcp sendmsg
(we left in the retry on failure)
2) change cifs to not set sendbuf and rcvbuf size for the socket
(let tcp autotune the buffer sizes since that works much better
in the TCP stack now)
3) if we have a partial frame sent in smb_send2, mark the tcp
session as invalid (close the socket and reconnect) so we do
not corrupt the remaining part of the SMB with the beginning
of the next SMB.

This does not appear to hurt performance measurably and has
been run in various scenarios, but it definately removes
a corruption that we were seeing in some high stress
test cases.

Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-29 00:47:57 +00:00
Jeff Layton 391e575556 cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle
cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle

The rename destination isn't supposed to be null terminated. Also,
change the name string arg to be const.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24 19:07:36 +00:00
Jeff Layton 6d22f09896 cifs: add function to set file disposition
cifs: add function to set file disposition

The proper way to set the delete on close bit on an already existing
file is to use SET_FILE_INFO with an infolevel of
SMB_FILE_DISPOSITION_INFO. Add a function to do that and have the
silly-rename code use it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23 17:39:28 +00:00
Jeff Layton 2dd2dfa060 Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg
The new name is more clear since this is also used to set file
attributes. We'll need the pid_of_opener arg so that we can
pass in filehandles of other pids and spare ourselves an open
call.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06 04:24:50 +00:00
Jeff Layton 6fc000e519 change CIFSSMBSetTimes to CIFSSMBSetPathInfo
CIFSSMBSetTimes is a deceptive name. This function does more that just
set file times. Change it to CIFSSMBSetPathInfo, which is closer to its
real purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06 04:24:01 +00:00
Jeff Layton 4e1e7fb9e8 bundle up Unix SET_PATH_INFO args into a struct and change name
We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set
file times as well, but that makes the argument list rather long. Bundle
up the args for unix SET_PATH_INFO call into a struct. For now, we don't
actually use the times fields anywhere. That will be done in a follow-on
patch.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06 04:17:20 +00:00
Steve French c2cf07d591 [CIFS] Finishup DFS code
Fixup GetDFSRefer to prepare for cleanup of SMB response processing
Fix build warning in link.c

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15 06:20:02 +00:00
Steve French 646dd53987 [CIFS] Fix paths when share is in DFS to include proper prefix
Some versions of Samba (3.2-pre e.g.) are stricter about checking to make sure that
paths in DFS name spaces are sent in the form \\server\share\dir\subdir ...
instead of \dir\subdir

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15 01:50:56 +00:00
Steve French 582d21e5e3 [CIFS] cleanup old checkpatch warnings
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-13 04:54:12 +00:00
Igor Mammedov 7c5e628f95 [CIFS] Fixed build warning in is_ip
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-08 20:48:42 +00:00
Steve French 4b18f2a9c3 [CIFS] convert usage of implicit booleans to bool
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-04-29 00:06:05 +00:00
Igor Mammedov 78d31a3a87 cifs: timeout dfs automounts +little fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-25 09:15:26 -04:00
Steve French 5d941ca628 [CIFS] Fix oops when slow oplock process races with unmount
If a tcon is being freed in call tconInfoFree, clean up any entries that may
exist in global oplock queue as the tcon structure hanging off of those entries
will be invalid and can cause oops while accesing any elements in the
tcon structure.

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-04-15 18:40:48 +00:00
Steve French 8b1327f6ed [CIFS] file create with acl support enabled is slow
Shirish Pargaonkar noted:
With cifsacl mount option, when a file is created on the Windows server,
exclusive oplock is broken right away because the get cifs acl code
again opens the file to obtain security descriptor.
The client does not have the newly created file handle or inode in any
of its lists yet so it does not respond to oplock break and server waits for
its duration and then responds to the second open. This slows down file
creation signficantly.  The fix is to pass the file descriptor to the get
cifsacl code wherever available so that get cifs acl code does not send
second open (NT Create ANDX) and oplock is not broken.

CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-03-14 22:37:16 +00:00
Harvey Harrison 55f78e1771 [CIFS] cifs: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-03-10 17:14:34 +00:00
Steve French c1ce264470 [CIFS] fix typo
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-13 02:59:36 +00:00
Steve French 90c81e0b0e [CIFS] clean up some hard to read ifdefs
Christoph had noticed too many ifdefs in the CIFS code making it
hard to read.  This patch removes about a quarter of them from
the C files in cifs by improving a few key ifdefs in the .h files.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-12 20:32:36 +00:00
Steve French ad7a2926b9 [CIFS] reduce checkpatch warnings
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-07 23:25:02 +00:00
Steve French 366781c196 [CIFS] DFS build fixes
Also includes a few minor changes suggested by Christoph

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-01-25 10:12:41 +00:00
Igor Mammedov 6d5ae0deb1 [CIFS] DFS support: provide shrinkable mounts
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-01-25 03:28:31 +00:00
Steve French 97837582bc [CIFS] Allow setting mode via cifs acl
Requires cifsacl mount flag to be on and CIFS_EXPERIMENTAL enabled

CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-12-31 07:47:21 +00:00
Steve French f7a44eadd5 [CIFS] remove build warning
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-17 00:01:51 +00:00
Steve French 8840dee9dc [CIFS] minor checkpatch cleanup
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 23:05:52 +00:00
Jeff Layton d6c2e4d02b [CIFS] have cifs_get_spnego_key get the hostname from TCP_Server_Info
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 22:23:17 +00:00
Steve French 133672efbc [CIFS] Fix buffer overflow if server sends corrupt response to small
request

In SendReceive() function in transport.c - it memcpy's
message payload into a buffer passed via out_buf param. The function
assumes that all buffers are of size (CIFSMaxBufSize +
MAX_CIFS_HDR_SIZE) , unfortunately it is also called with smaller
(MAX_CIFS_SMALL_BUFFER_SIZE) buffers.  There are eight callers
(SMB worker functions) which are primarily affected by this change:

TreeDisconnect, uLogoff, Close, findClose, SetFileSize, SetFileTimes,
Lock and PosixLock

CC: Dave Kleikamp <shaggy@austin.ibm.com>
CC: Przemyslaw Wegrzyn <czajnik@czajsoft.pl>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-13 22:41:37 +00:00
Jeff Layton 09fe7ba78d [CIFS] implement upcalls for SPNEGO blob via keyctl API
Add routines to handle upcalls to userspace via keyctl for the purpose
of getting a SPNEGO blob for a particular uid and server combination.

Clean up the Makefile a bit and set it up to only compile cifs_spnego
if CONFIG_CIFS_UPCALL is set. Also change CONFIG_CIFS_UPCALL to depend
on CONFIG_KEYS rather than CONFIG_CONNECTOR.

cifs_spnego.h defines the communications between kernel and userspace
and is intended to be shared with userspace programs.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-03 04:48:29 +00:00
Steve French 953f868138 [CIFS] Don't request too much permission when reading an ACL
We were requesting GENERIC_READ but that fails when  we do not have
read permission on the file (even if we could read the ACL).

Also move the dump access control entry code into debug ifdef.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-31 04:54:42 +00:00
Steve French 630f3f0c45 [CIFS] acl support part 6
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-25 21:17:17 +00:00
Steve French 4879b44829 [CIFS] ACL support part 5
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-19 21:57:39 +00:00