Commit Graph

54 Commits

Author SHA1 Message Date
Al Viro c4d30967f3 9p: turn fid->dlist into hlist
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27 22:51:08 -05:00
Eric W. Biederman b464255699 9p: Modify struct 9p_fid to use a kuid_t not a uid_t
Change struct 9p_fid and it's associated functions to
use kuid_t's instead of uid_t.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-12 03:19:32 -08:00
Eric W. Biederman f791f7c5e3 9p: Transmit kuid and kgid values
Modify the p9_client_rpc format specifiers of every function that
directly transmits a uid or a gid from 'd' to 'u' or 'g' as
appropriate.

Modify those same functions to take kuid_t and kgid_t parameters
instead of uid_t and gid_t parameters.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2013-02-12 03:19:30 -08:00
Aneesh Kumar K.V 348b59012e net/9p: Convert net/9p protocol dumps to tracepoints
This helps in more control over debugging.
root@qemu-img-64:~# ls /pass/123
ls: cannot access /pass/123: No such file or directory
root@qemu-img-64:~# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
#              | |       |          |         |
              ls-1536  [001]    70.928584: 9p_protocol_dump: clnt 18446612132784021504 P9_TWALK(tag = 1)
000: 16 00 00 00 6e 01 00 01 00 00 00 02 00 00 00 01
010: 00 03 00 31 32 33 00 00 00 ff ff ff ff 00 00 00

              ls-1536  [001]    70.928587: <stack trace>
 => trace_9p_protocol_dump
 => p9pdu_finalize
 => p9_client_rpc
 => p9_client_walk
 => v9fs_vfs_lookup
 => d_alloc_and_lookup
 => walk_component
 => path_lookupat
              ls-1536  [000]    70.929696: 9p_protocol_dump: clnt 18446612132784021504 P9_RLERROR(tag = 1)
000: 0b 00 00 00 07 01 00 02 00 00 00 4e 03 00 02 00
010: 00 00 00 00 03 00 02 00 00 00 00 00 ff 43 00 00

              ls-1536  [000]    70.929697: <stack trace>
 => trace_9p_protocol_dump
 => p9_client_rpc
 => p9_client_walk
 => v9fs_vfs_lookup
 => d_alloc_and_lookup
 => walk_component
 => path_lookupat
 => do_path_lookup

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:12 -05:00
Dan Carpenter ef6b0807e2 fs/9p: change an int to unsigned int
Without this msize=4294967295 will result in a crash

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:12 -05:00
Aneesh Kumar K.V 48e370ff93 fs/9p: add 9P2000.L unlinkat operation
unlinkat - Remove a directory entry

size[4] Tunlinkat tag[2] dirfid[4] name[s] flag[4]
size[4] Runlinkat tag[2]

older Tremove have the below request format

size[4] Tremove tag[2] fid[4]

The remove message is used to remove a directory entry either file or directory
The remove opreation is actually a directory opertation and should ideally have
dirfid, if not we cannot represent the fid on server with anything other than
name. We will have to derive the directory name from fid in the Tremove request.

NOTE: The operation doesn't clunk the unlink fid.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-07-23 09:32:52 -05:00
Aneesh Kumar K.V 9e8fb38e7d fs/9p: add 9P2000.L renameat operation
renameat - change name of file or directory

size[4] Trenameat tag[2] olddirfid[4] oldname[s] newdirfid[4] newname[s]
size[4] Rrenameat tag[2]

older Trename have the below request format

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]

The rename message is used to change the name of a file, possibly moving it
to a new directory. The rename opreation is actually a directory opertation
and should ideally have olddirfid, if not we cannot represent the fid on server
with anything other than name. We will have to derive the old directory name
from fid in the Trename request.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-07-23 09:32:51 -05:00
Prem Karat 4d63055fa9 fs/9p: Clean-up get_protocol_version() to use strcmp
Signed-off-by: Prem Karat <prem.karat@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-07-23 09:32:49 -05:00
Rob Landley aca0076336 9p: typo fixes and minor cleanups
Typo fixes and minor cleanups for v9fs

Signed-off-by: Rob Landley <rob@landley.net>
Reviewed-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-05-25 08:46:37 -05:00
Harsh Prateek Bora b76225e22a net/9p: nwname should be an unsigned int
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric VAn Hensbergen <ericvh@gmail.com>
2011-04-15 15:26:15 -05:00
Aneesh Kumar K.V df5d8c80f1 9p: revert tsyncfs related changes
Now that we use write_inode to flush server
cache related to fid, we don't need tsyncfs either fort dotl or dotu
protocols. For dotu this helps to do a more efficient server flush.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-04-15 15:26:14 -05:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Aneesh Kumar K.V c0aa4caf4c net/9p: Implement syncfs 9P operation
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-03-15 09:57:38 -05:00
Venkateswararao Jujjuri (JV) b165d60145 9p: Add datasync to client side TFSYNC/RFSYNC for dotl
SYNOPSIS
    size[4] Tfsync tag[2] fid[4] datasync[4]

    size[4] Rfsync tag[2]

DESCRIPTION

    The Tfsync transaction transfers ("flushes") all modified in-core data of
    file identified by fid to the disk device (or other  permanent  storage
    device)  where that  file  resides.

    If datasync flag is specified data will be fleshed but does not flush
    modified metadata unless  that  metadata  is  needed  in order to allow a
    subsequent data retrieval to be correctly handled.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:49 -05:00
M. Mohan Kumar 329176cc2c 9p: Implement TREADLINK operation for 9p2000.L
Synopsis

	size[4] TReadlink tag[2] fid[4]
	size[4] RReadlink tag[2] target[s]

Description
	Readlink is used to return the contents of the symoblic link
        referred by fid. Contents of symboic link is returned as a
        response.

	target[s] - Contents of the symbolic link referred by fid.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:48 -05:00
M. Mohan Kumar 1d769cd192 9p: Implement TGETLOCK
Synopsis

    size[4] TGetlock tag[2] fid[4] getlock[n]
    size[4] RGetlock tag[2] getlock[n]

Description

TGetlock is used to test for the existence of byte range posix locks on a file
identified by given fid. The reply contains getlock structure. If the lock could
be placed it returns F_UNLCK in type field of getlock structure.  Otherwise it
returns the details of the conflicting locks in the getlock structure

    getlock structure:
      type[1] - Type of lock: F_RDLCK, F_WRLCK
      start[8] - Starting offset for lock
      length[8] - Number of bytes to check for the lock
             If length is 0, check for lock in all bytes starting at the location
            'start' through to the end of file
      pid[4] - PID of the process that wants to take lock/owns the task
               in case of reply
      client[4] - Client id of the system that owns the process which
                  has the conflicting lock

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
M. Mohan Kumar a099027c77 9p: Implement TLOCK
Synopsis

    size[4] TLock tag[2] fid[4] flock[n]
    size[4] RLock tag[2] status[1]

Description

Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request

    flock structure:
        type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
        flags[4] - Flags could be either of
          P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a
            conflicting lock exists, wait for that lock to be released.
          P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is
            trying to reclaim a lock after a server restrart (due to crash)
        start[8] - Starting offset for lock
        length[8] - Number of bytes to lock
          If length is 0, lock all bytes starting at the location 'start'
          through to the end of file
        pid[4] - PID of the process that wants to take lock
        client_id[4] - Unique client id

        status[1] - Status of the lock request, can be
          P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
          P9_LOCK_GRACE(3)
          P9_LOCK_SUCCESS - Request was successful
          P9_LOCK_BLOCKED - A conflicting lock is held by another process
          P9_LOCK_ERROR - Error while processing the lock request
          P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
            requests in this period (except locks with
            P9_LOCK_FLAGS_RECLAIM flag set)

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
Venkateswararao Jujjuri (JV) 920e65dc69 [9p] Introduce client side TFSYNC/RFSYNC for dotl.
SYNOPSIS
    size[4] Tfsync tag[2] fid[4]

    size[4] Rfsync tag[2]

DESCRIPTION

The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other  permanent  storage
device)  where that  file  resides.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
stephen hemminger 32a875adcd 9p: client code cleanup
Make p9_client_version static since only used in one file.
Remove p9_client_auth because it is defined but never used.
Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:39 -07:00
Aneesh Kumar K.V eda25e4616 net/9p: Implement TXATTRCREATE 9p call
TXATTRCREATE:  Prepare a fid for setting xattr value on a file system object.

 size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
 size[4] RXATTRCREATE tag[2]

txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.

flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."

The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:34 -05:00
Aneesh Kumar K.V 0ef63f345c net/9p: Implement attrwalk 9p call
TXATTRWALK: Descend a ATTR namespace

 size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
 size[4] RXATTRWALK tag[2] size[8]

txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:33 -05:00
Venkateswararao Jujjuri (JV) 5643135a28 fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:32 -05:00
M. Mohan Kumar 01a622bd74 9p: Implement TMKDIR
Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:31 -05:00
M. Mohan Kumar 4b43516ab1 9p: Implement TMKNOD
Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:30 -05:00
Venkateswararao Jujjuri (JV) 50cc42ff3d 9p: Define and implement TSYMLINK for 9P2000.L
Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:29 -05:00
Venkateswararao Jujjuri (JV) 652df9a7fd 9p: Define and implement TLINK for 9P2000.L
This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:25 -05:00
Sripathi Kodi 87d7845aa0 9p: Implement client side of setattr for 9P2000.L protocol.
SYNOPSIS

      size[4] Tsetattr tag[2] attr[n]

      size[4] Rsetattr tag[2]

    DESCRIPTION

      The setattr command changes some of the file status information.
      attr resembles the iattr structure used in Linux kernel. It
      specifies which status parameter is to be changed and to what
      value. It is laid out as follows:

         valid[4]
            specifies which status information is to be changed. Possible
            values are:
            ATTR_MODE       (1 << 0)
            ATTR_UID        (1 << 1)
            ATTR_GID        (1 << 2)
            ATTR_SIZE       (1 << 3)
            ATTR_ATIME      (1 << 4)
            ATTR_MTIME      (1 << 5)
            ATTR_ATIME_SET  (1 << 7)
            ATTR_MTIME_SET  (1 << 8)

            The last two bits represent whether the time information
            is being sent by the client's user space. In the absense
            of these bits the server always uses server's time.

         mode[4]
            File permission bits

         uid[4]
            Owner id of file

         gid[4]
            Group id of the file

         size[8]
            File size

         atime_sec[8]
            Time of last file access, seconds

         atime_nsec[8]
            Time of last file access, nanoseconds

         mtime_sec[8]
            Time of last file modification, seconds

         mtime_nsec[8]
            Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to
   p9_iattr_dotl structure and passes it down to the client. The
   only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
   parameters because I don't think these are needed in our case.
   The client user space can request updating just ctime by calling
   chown(fd, -1, -1). This is handled on server side without a need
   for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
   size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
   none of them does: if the request succeeds, all changes were made;
   if it fails, none were."
   I have not done anything to implement this specifically because I
   don't see a reason.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:10 -05:00
Sripathi Kodi f085312204 9p: getattr client implementation for 9P2000.L protocol.
SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for
        9P2000.L. It introduces a new structure p9_stat_dotl for getting
        Linux stat information along with QID. The data layout is similar to
        stat structure in Linux user space with the following major
        differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense
        on the client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02 14:25:09 -05:00
Sripathi Kodi 7751bdb3a0 9p: readdir implementation for 9p2000.L
This patch implements the kernel part of readdir() implementation for 9p2000.L

    Change from V3: Instead of inode, server now sends qids for each dirent

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.

    This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
    This function sends P9_TREADDIR command to the server. In response the server
    sends a buffer filled with dirent structures. This is different from the
    existing v9fs_dir_readdir() call which receives stat structures from the server.
    This results in significant speedup of readdir() on large directories.
    For example, doing 'ls >/dev/null' on a directory with 10000 files on my
    laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
    with the new readdir.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:07 -05:00
Sripathi Kodi 4681dbdacb 9p: add 9P2000.L rename operation
I made a V2 of this patch on top of my patches for VFS switches.
All the changes were due to change in some offsets.

rename - change name of file or directory

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]
size[4] Rrename tag[2]

The rename message is used to change the name of a file, possibly moving it
to a new directory.  The 9P wstat message can only rename a file within the
same directory.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:34 -05:00
Sripathi Kodi bda8e77520 9p: add 9P2000.L statfs operation
I made a V2 of this patch on top of my patches for VFS switches. The
change was adding v9fs_statfs pointer to v9fs_super_ops_dotl
instead of v9fs_super_ops.

statfs - get file system statistics

size[4] Tstatfs tag[2] fid[4]
size[4] Rstatfs tag[2] type[4] bsize[4] blocks[8] bfree[8] bavail[8]
                files[8] ffree[8] fsid[8] namelen[4]

The statfs message is used to request file system information returned
by the statfs(2) system call, which is used by df(1) to report file
system and disk space usage.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:33 -05:00
Aneesh Kumar K.V 6d96d3ab7a 9p: Make sure we are able to clunk the cached fid on umount
dcache prune happen on umount. So we cannot mark the client
satus disconnect. That will prevent a 9p call to the server

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:36 -05:00
Sripathi Kodi 45bc21edb5 9p: Change the name of new protocol from 9p2010.L to 9p2000.L
This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 08:57:29 -06:00
Sripathi Kodi 342fee1d5c 9P2010.L handshake: Remove "dotu" variable
Removes 'dotu' variable and make everything dependent
on 'proto_version' field.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:42 -06:00
Sripathi Kodi 0fb80abd91 9P2010.L handshake: Add mount option
Add new mount V9FS mount option to specify protocol version

This patch adds a new mount option to specify protocol version.
With this option it is possible to use "-o version=" switch to
specify 9P protocol version to use. Valid options for version
are:
9p2000
9p2000.u
9p2010.L

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:42 -06:00
Eric Van Hensbergen 3e2796a90c 9p: fix readdir corner cases
The patch below also addresses a couple of other corner cases in readdir
seen with a large (e.g. 64k) msize.  I'm not sure what people think of
my co-opting of fid->aux here.  I'd be happy to rework if there's a better
way.

When the size of the user supplied buffer passed to readdir is smaller
than the data returned in one go by the 9P read request, v9fs_dir_readdir()
currently discards extra data so that, on the next call, a 9P read
request will be issued with offset < previous offset + bytes returned,
which voilates the constraint described in paragraph 3 of read(5) description.
This patch preseves the leftover data in fid->aux for use in the next call.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-11-02 08:43:45 -06:00
Latchesar Ionkov 1bab88b231 net/9p: handle correctly interrupted 9P requests
Currently the 9p code crashes when a operation is interrupted, i.e. for
example when the user presses ^C while reading from a file.

This patch fixes the code that is responsible for interruption and flushing
of 9P operations.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2009-04-05 16:54:53 -05:00
Eric Van Hensbergen e45c5405e1 9p: fix sparse warnings
Several sparse warnings were introduced by patches accepted during the merge
window which weren't caught.  This patch fixes those warnings.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-22 18:54:47 -05:00
Tom Tucker fc79d4b104 9p: rdma: RDMA Transport Support for 9P
This patch implements the RDMA transport provider for 9P. It allows
mounts to be performed over iWARP and IB capable network interfaces.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Latchesar Ionkov <lionkov@lanl.gov>
2008-10-22 18:47:39 -05:00
Eric Van Hensbergen 02da398b95 9p: eliminate depricated conv functions
Remove depricated conv functions which have been replaced with new 
protocol routines.

This patch also reworks the one instance of the file-system code which
directly calls conversion routines (to accomplish unpacking dirreads).

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:06:57 -05:00
Eric Van Hensbergen 51a87c552d 9p: rework client code to use new protocol support functions
Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:45 -05:00
Eric Van Hensbergen cb198131b0 9p: remove unnecessary tag field from p9_req_t structure
This removes the vestigial tag field from the p9_req_t structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:45 -05:00
Eric Van Hensbergen 06b55b464e 9p: move dirread to fs layer
Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation 
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a 
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Eric Van Hensbergen fbedadc16e 9p: move readn meta-function from client to fs layer
There are a couple of methods in the client code which aren't actually
wire operations.  To keep things organized cleaner, these operations are
being moved to the fs layer.

This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Eric Van Hensbergen 0fc9655ec6 9p: consolidate read/write functions
Currently there are two separate versions of read and write.  One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions.  This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen 91b8534fa8 9p: make rpc code common and rework flush code
This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.

This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen 673d62cdaa 9p: apply common request code to trans_fd
Apply the now common p9_req_t structure to the fd transport.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen fea511a644 9p: move request management to client code
The virtio transport uses a simplified request management system
that I want to use for all transports.  This patch adapts and moves the
exisiting code for managing requests to the client common code.
Later patches will apply these mechanisms to the other transports.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen 8b81ef589a 9p: consolidate transport structure
Right now there is a transport module structure which provides per-transport
type functions and data and a transport structure which contains per-instance
public data as well as function pointers to instance specific functions.

This patch moves public transport visible instance data to the client
structure (which in some cases had duplicate data) and consolidates the
functions into the transport module structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Eric Van Hensbergen ee443996a3 9p: Documentation updates
The kernel-doc comments of much of the 9p system have been in disarray since
reorganization.  This patch fixes those problems, adds additional documentation
and a template book which collects the 9p information.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-05-14 19:23:25 -05:00