Commit Graph

659 Commits

Author SHA1 Message Date
Ilya Dryomov 2bd93d4d7e libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpers
pg_to_raw_osds() helper for computing a raw (crush) set, which can
contain non-existant and down osds.

raw_to_up_osds() helper for pruning non-existant and down osds from the
raw set, therefore transforming it into an up set, and determining up
primary.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:10 -07:00
Ilya Dryomov 63a6993f52 libceph: primary_affinity decode bits
Add two helpers to decode primary_affinity (full map, vector<u32>) and
new_primary_affinity (inc map, map<u32, u32>) and switch to them.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:04 -07:00
Ilya Dryomov 2cfa34f2d6 libceph: primary_affinity infrastructure
Add primary_affinity infrastructure.  primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.

Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:02 -07:00
Ilya Dryomov d286de796a libceph: primary_temp decode bits
Add a common helper to decode both primary_temp (full map, map<pg_t,
u32>) and new_primary_temp (inc map, same) and switch to it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:00 -07:00
Ilya Dryomov 9686f94c8c libceph: primary_temp infrastructure
Add primary_temp mappings infrastructure.  struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.

Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:

    primary_temp 2.6 4

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:58 -07:00
Ilya Dryomov 35a935d75d libceph: generalize ceph_pg_mapping
In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:57 -07:00
Ilya Dryomov ec7af97258 libceph: introduce get_osdmap_client_data_v()
Full and incremental osdmaps are structured identically and have
identical headers.  Add a helper to decode both "old" (16-bit version,
v6) and "new" (8-bit struct_v+struct_compat+struct_len, v7) osdmap
enconding headers and switch to it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:55 -07:00
Ilya Dryomov 10db634e20 libceph: introduce decode{,_new}_pg_temp() and switch to them
Consolidate pg_temp (full map, map<pg_t, vector<u32>>) and new_pg_temp
(inc map, same) decoding logic into a common helper and switch to it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:53 -07:00
Ilya Dryomov 4d60351f90 libceph: switch osdmap_set_max_osd() to krealloc()
Use krealloc() instead of rolling our own.  (krealloc() with a NULL
first argument acts as a kmalloc()).  Properly initalize the new array
elements.  This is needed to make future additions to osdmap easier.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:52 -07:00
Ilya Dryomov 433fbdd31d libceph: introduce decode{,_new}_pools() and switch to them
Consolidate pools (full map, map<u64, pg_pool_t>) and new_pools (inc
map, same) decoding logic into a common helper and switch to it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:50 -07:00
Ilya Dryomov 0f70c7eedb libceph: rename __decode_pool{,_names}() to decode_pool{,_names}()
To be in line with all the other osdmap decode helpers.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:49 -07:00
Ilya Dryomov 53bbaba9d8 libceph: fix and clarify ceph_decode_need() sizes
Sum up sizeof(...) results instead of (incorrectly) hard-coding the
number of bytes, expressed in ints and longs.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:47 -07:00
Ilya Dryomov 9464d00862 libceph: nuke bogus encoding version check in osdmap_apply_incremental()
Only version 6 of osdmap encoding is supported, anything other than
version 6 results in an error and halts the decoding process.  Checking
if version is >= 5 is therefore bogus.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:46 -07:00
Ilya Dryomov 86f1742b94 libceph: fixup error handling in osdmap_apply_incremental()
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro.  This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset.  Follow osdmap_decode() and fix this by adding
a special e_inval label to be used by all ceph_decode_* macros.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:44 -07:00
Ilya Dryomov 9902e682c7 libceph: fix crush_decode() call site in osdmap_decode()
The size of the memory area feeded to crush_decode() should be limited
not only by osdmap end, but also by the crush map length.  Also, drop
unnecessary dout() (dout() in crush_decode() conveys the same info) and
step past crush map only if it is decoded successfully.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:43 -07:00
Ilya Dryomov 2d88b2e081 libceph: check length of osdmap osd arrays
Check length of osd_state, osd_weight and osd_addr arrays.  They
should all have exactly max_osd elements after the call to
osdmap_set_max_osd().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:41 -07:00
Ilya Dryomov 3977058c46 libceph: safely decode max_osd value in osdmap_decode()
max_osd value is not covered by any ceph_decode_need().  Use a safe
version of ceph_decode_* macro to decode it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:40 -07:00
Ilya Dryomov 597b52f6ca libceph: fixup error handling in osdmap_decode()
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro.  This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset.  Fix this by adding a special e_inval label to
be used by all ceph_decode_* macros.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:38 -07:00
Ilya Dryomov a2505d63ee libceph: split osdmap allocation and decode steps
Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:37 -07:00
Ilya Dryomov 38a8d56023 libceph: dump osdmap and enhance output on decode errors
Dump osdmap in hex on both full and incremental decode errors, to make
it easier to match the contents with error offset.  dout() map epoch
and max_osd value on success.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:35 -07:00
Ilya Dryomov 1c00240e00 libceph: dump pg_temp mappings to debugfs
Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g:

    pg_temp 2.6 [2,3,4]

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:34 -07:00
Ilya Dryomov 0a2800d728 libceph: do not prefix osd lines with \t in debugfs output
To save screen space in anticipation of more fields (e.g. primary
affinity).

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:32 -07:00
Ilya Dryomov 35fea3a18a libceph: refer to osdmap directly in osdmap_show()
To make it more readable and save screen space.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:31 -07:00
Ilya Dryomov d83ed858f1 crush: add SET_CHOOSELEAF_VARY_R step
This lets you adjust the vary_r tunable on a per-rule basis.

Reflects ceph.git commit f944ccc20aee60a7d8da7e405ec75ad1cd449fac.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04 21:07:28 -07:00
Ilya Dryomov e2b149cc4b crush: add chooseleaf_vary_r tunable
The current crush_choose_firstn code will re-use the same 'r' value for
the recursive call.  That means that if we are hitting a collision or
rejection for some reason (say, an OSD that is marked out) and need to
retry, we will keep making the same (bad) choice in that recursive
selection.

Introduce a tunable that fixes that behavior by incorporating the parent
'r' value into the recursive starting point, so that a different path
will be taken in subsequent placement attempts.

Note that this was done from the get-go for the new crush_choose_indep
algorithm.

This was exposed by a user who was seeing PGs stuck in active+remapped
after reweight-by-utilization because the up set mapped to a single OSD.

Reflects ceph.git commit a8e6c9fbf88bad056dd05d3eb790e98a5e43451a.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04 21:07:26 -07:00
Ilya Dryomov 6ed1002f36 crush: allow crush rules to set (re)tries counts to 0
These two fields are misnomers; they are *retry* counts.

Reflects ceph.git commit f17caba8ae0cad7b6f8f35e53e5f73b444696835.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04 21:07:25 -07:00
Ilya Dryomov 48a163dbb5 crush: fix off-by-one errors in total_tries refactor
Back in 27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH
code to allow adjustment of the retry counts on a per-pool basis.  That
commit had an off-by-one bug: the previous "tries" counter was a *retry*
count, not a *try* count, but the new code was passing in 1 meaning
there should be no retries.

Fix the ftotal vs tries comparison to use < instead of <= to fix the
problem.  Note that the original code used <= here, which means the
global "choose_total_tries" tunable is actually counting retries.
Compensate for that by adding 1 in crush_do_rule when we pull the tunable
into the local variable.

This was noticed looking at output from a user provided osdmap.
Unfortunately the map doesn't illustrate the change in mapping behavior
and I haven't managed to construct one yet that does.  Inspection of the
crush debug output now aligns with prior versions, though.

Reflects ceph.git commit 795704fd615f0b008dcc81aa088a859b2d075138.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04 21:07:23 -07:00
Yan, Zheng d90deda69c libceph: fix oops in ceph_msg_data_{pages,pagelist}_advance()
When there is no more data, ceph_msg_data_{pages,pagelist}_advance()
should not move on to the next page.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:15 -07:00
Ilya Dryomov c647b8a8c6 libceph: add support for CEPH_OSD_OP_SETALLOCHINT osd op
This is primarily for rbd's benefit and is supposed to combat
fragmentation:

"... knowing that rbd images have a 4m size, librbd can pass a hint
that will let the osd do the xfs allocation size ioctl on new files so
that they are allocated in 1m or 4m chunks.  We've seen cases where
users with rbd workloads have very high levels of fragmentation in xfs
and this would mitigate that and probably have a pretty nice
performance benefit."

SETALLOCHINT is considered advisory, so our backwards compatibility
mechanism here is to set FAILOK flag for all SETALLOCHINT ops.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:51 +08:00
Ilya Dryomov 7b25bf5f02 libceph: encode CEPH_OSD_OP_FLAG_* op flags
Encode ceph_osd_op::flags field so that it gets sent over the wire.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:51 +08:00
Ilya Dryomov 9d521470a4 libceph: a per-osdc crush scratch buffer
With the addition of erasure coding support in the future, scratch
variable-length array in crush_do_rule_ary() is going to grow to at
least 200 bytes on average, on top of another 128 bytes consumed by
rawosd/osd arrays in the call chain.  Replace it with a buffer inside
struct osdmap and a mutex.  This shouldn't result in any contention,
because all osd requests were already serialized by request_mutex at
that point; the only unlocked caller was ceph_ioctl_get_dataloc().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:50 +08:00
stephen hemminger 2045ceaed4 net: remove unnecessary return's
One of my pet coding style peeves is the practice of
adding extra return; at the end of function.
Kill several instances of this in network code.

I suppose some coccinelle wizardy could do this automatically.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13 18:33:38 -05:00
Ilya Dryomov 0ec1d15ec6 libceph: do not dereference a NULL bio pointer
Commit f38a5181d9 ("ceph: Convert to immutable biovecs") introduced
a NULL pointer dereference, which broke rbd in -rc1.  Fix it.

Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 11:37:07 -08:00
Ilya Dryomov ff513ace9b libceph: take map_sem for read in handle_reply()
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case.  (Lock ordering is:
map_sem, request_mutex, crush_mutex.)

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:53 -08:00
Ilya Dryomov 0bbfdfe8d2 libceph: factor out logic from ceph_osdc_start_request()
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request().  ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:42 -08:00
Ilya Dryomov c172ec5c8d libceph: fix error handling in ceph_osdc_init()
msgpool_op_reply message pool isn't destroyed if workqueue construction
fails.  Fix it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-03 19:20:59 +02:00
Linus Torvalds f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Ilya Dryomov 205ee1187a libceph: follow redirect replies from osds
Follow redirect replies from osds, for details see ceph.git commit
fbbe3ad1220799b7bb00ea30fce581c5eadaf034.

v1 (current) version of redirect reply consists of oloc and oid, which
expands to pool, key, nspace, hash and oid.  However, server-side code
that would populate anything other than pool doesn't exist yet, and
hence this commit adds support for pool redirects only.  To make sure
that future server-side updates don't break us, we decode all fields
and, if any of key, nspace, hash or oid have a non-default value, error
out with "corrupt osd_op_reply ..." message.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:53 +02:00
Ilya Dryomov 3c972c95c6 libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}
Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:49 +02:00
Ilya Dryomov 17a13e4028 libceph: follow {read,write}_tier fields on osd request submission
Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and
write_tier for write and read+write ops (aka basic tiering support).
{read,write}_tier are part of pg_pool_t since v9.  This commit bumps
our pg_pool_t decode compat version from v7 to v9, all new fields
except for {read,write}_tier are ignored.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:45 +02:00
Ilya Dryomov ce7f6a2790 libceph: add ceph_pg_pool_by_id()
"Lookup pool info by ID" function is hidden in osdmap.c.  Expose it to
the rest of libceph.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:40 +02:00
Ilya Dryomov 7c13cb6435 libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:32 +02:00
Ilya Dryomov 4295f2217a libceph: introduce and start using oid abstraction
In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:28 +02:00
Ilya Dryomov 2d0ebc5d59 libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN
In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to
CEPH_MAX_OID_NAME_LEN.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:24 +02:00
Ilya Dryomov 22116525ba libceph: start using oloc abstraction
Instead of relying on pool fields in ceph_file_layout (for mapping) and
ceph_pg (for enconding), start using ceph_object_locator (oloc)
abstraction.  Note that userspace oloc currently consists of pool, key,
nspace and hash fields, while this one contains only a pool.  This is
OK, because at this point we only send (i.e. encode) olocs and never
have to receive (i.e. decode) them.

This makes keeping a copy of ceph_file_layout in every osd request
unnecessary, so ceph_osd_request::r_file_layout field is nuked.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:03 +02:00
Ilya Dryomov 0b4af2e8c9 libceph: dout() is missing a newline
Add a missing newline to a dout() in __reset_osd().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-01-26 12:35:54 +02:00
Ilya Dryomov eeb0bed557 libceph: add ceph_kv{malloc,free}() and switch to them
Encapsulate kmalloc vs vmalloc memory allocation and freeing logic into
two helpers, ceph_kvmalloc() and ceph_kvfree(), and switch to them.

ceph_kvmalloc() kmalloc()'s a maximum of 8 pages, anything bigger is
vmalloc()'ed with __GFP_HIGHMEM set.  This changes the existing
behaviour:

- for buffers (ceph_buffer_new()), from trying to kmalloc() everything
  and using vmalloc() just as a fallback

- for messages (ceph_msg_new()), from going to vmalloc() for anything
  bigger than a page

- for messages (ceph_msg_new()), from disallowing vmalloc() to use high
  memory

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-26 12:34:23 +02:00
Ilya Dryomov f2be82b005 libceph: fix preallocation check in get_reply()
The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer.  Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to

[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)

and, through another bug, leads to forever hung tasks and forced
reboots.  Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.

Fixes: http://tracker.ceph.com/issues/5425

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14 11:27:47 +02:00
Ilya Dryomov 3f0a4ac55f libceph: rename front to front_len in get_reply()
Rename front local variable to front_len in get_reply() to make its
purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14 11:27:42 +02:00
Ilya Dryomov 3cea4c3071 libceph: rename ceph_msg::front_max to front_alloc_len
Rename front_max field of struct ceph_msg to front_alloc_len to make
its purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14 11:27:26 +02:00
Ilya Dryomov f48db1e9ac libceph: use CEPH_MON_PORT when the specified port is 0
Similar to userspace, don't bail with "parse_ips bad ip ..." if the
specified port is port 0, instead use port CEPH_MON_PORT (6789, the
default monitor port).

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:30 +02:00
Ilya Dryomov 0e32d7126c crush: fix crush_choose_firstn comment
Reflects ceph.git commit 8b38f10bc2ee3643a33ea5f9545ad5c00e4ac5b4.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:28 +02:00
Ilya Dryomov 2d8be0bc8b crush: attempts -> tries
Reflects ceph.git commit ea3a0bb8b773360d73b8b77fa32115ef091c9857.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:27 +02:00
Ilya Dryomov f046bf9208 crush: add set_choose_local_[fallback_]tries steps
This allows all of the tunables to be overridden by a specific rule.

Reflects ceph.git commits d129e09e57fbc61cfd4f492e3ee77d0750c9d292,
                          0497db49e5973b50df26251ed0e3f4ac7578e66e.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:26 +02:00
Ilya Dryomov d390bb2a83 crush: generalize descend_once
The legacy behavior is to make the normal number of tries for the
recursive chooseleaf call.  The descend_once tunable changed this to
making a single try and bail if we get a reject (note that it is
impossible to collide in the recursive case).

The new set_chooseleaf_tries lets you select the number of recursive
chooseleaf attempts for indep mode, or default to 1.  Use the same
behavior for firstn, except default to total_tries when the legacy
tunables are set (for compatibility).  This makes the rule step
override the (new) default of 1 recursive attempt, keeping behavior
consistent with indep mode.

Reflects ceph.git commit 685c6950ef3df325ef04ce7c986e36ca2514c5f1.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:25 +02:00
Ilya Dryomov 917edad5d1 crush: CHOOSE_LEAF -> CHOOSELEAF throughout
This aligns the internal identifier names with the user-visible names in
the decompiled crush map language.

Reflects ceph.git commit caa0e22e15e4226c3671318ba1f61314bf6da2a6.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:24 +02:00
Ilya Dryomov cc10df4a3a crush: add SET_CHOOSE_TRIES rule step
Since we can specify the recursive retries in a rule, we may as well also
specify the non-recursive tries too for completeness.

Reflects ceph.git commit d1b97462cffccc871914859eaee562f2786abfd1.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:23 +02:00
Ilya Dryomov f18650ace3 crush: apply chooseleaf_tries to firstn mode too
Parameterize the attempts for the _firstn choose method, and apply the
rule-specified tries count to firstn mode as well.  Note that we have
slightly different behavior here than with indep:

 If the firstn value is not specified for firstn, we pass through the
 normal attempt count.  This maintains compatibility with legacy behavior.
 Note that this is usually *not* actually N^2 work, though, because of the
 descend_once tunable.  However, descend_once is unfortunately *not* the
 same thing as 1 chooseleaf try because it is only checked on a reject but
 not on a collision.  Sigh.

 In contrast, for indep, if tries is not specified we default to 1
 recursive attempt, because that is simply more sane, and we have the
 option to do so.  The descend_once tunable has no effect for indep.

Reflects ceph.git commit 64aeded50d80942d66a5ec7b604ff2fcbf5d7b63.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:22 +02:00
Ilya Dryomov be3226acc5 crush: new SET_CHOOSE_LEAF_TRIES command
Explicitly control the number of sample attempts, and allow the number of
tries in the recursive call to be explicitly controlled via the rule. This
is important because the amount of time we want to spend looking for a
solution may be rule dependent (e.g., higher for the wide indep pool than
the rep pools).

(We should do the same for the other tunables, by the way!)

Reflects ceph.git commit c43c893be872f709c787bc57f46c0e97876ff681.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:21 +02:00
Ilya Dryomov 4158608139 crush: pass parent r value for indep call
Pass down the parent's 'r' value so that we will sample different values in
the recursive call when the parent tries multiple times.  This avoids doing
useless work (calling multiple times and trying the same values).

Reflects ceph.git commit 2731d3030d7a3e80922b7f1b7756f9a4a124bac5.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:20 +02:00
Ilya Dryomov ab4ce2b5bd crush: clarify numrep vs endpos
Pass numrep (the width of the result) separately from the number of results
we want *this* iteration.  This makes things less awkward when we do a
recursive call (for chooseleaf) and want only one item.

Reflects ceph.git commit 1b567ee08972f268c11b43fc881e57b5984dd08b.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:19 +02:00
Ilya Dryomov 9fe0718282 crush: strip firstn conditionals out of crush_choose, rename
Now that indep is handled by crush_choose_indep, rename crush_choose to
crush_choose_firstn and remove all the conditionals.  This ends up
stripping out *lots* of code.

Note that it *also* makes it obvious that the shenanigans we were playing
with r' for uniform buckets were broken for firstn mode.  This appears to
have happened waaaay back in commit dae8bec9 (or earlier)... 2007.

Reflects ceph.git commit 94350996cb2035850bcbece6a77a9b0394177ec9.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:18 +02:00
Ilya Dryomov 3102b0a5b4 crush: add note about r in recursive choose
Reflects ceph.git commit 4551fee9ad89d0427ed865d766d0d44004d3e3e1.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:17 +02:00
Ilya Dryomov 9a3b490a20 crush: use breadth-first search for indep mode
Reflects ceph.git commit 86e978036a4ecbac4c875e7c00f6c5bbe37282d3.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:16 +02:00
Ilya Dryomov c6d98a603a crush: return CRUSH_ITEM_UNDEF for failed placements with indep
For firstn mode, if we fail to make a valid placement choice, we just
continue and return a short result to the caller.  For indep mode, however,
we need to make the position stable, and return an undefined value on
failed placements to avoid shifting later results to the left.

Reflects ceph.git commit b1d4dd4eb044875874a1d01c01c7d766db5d0a80.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:15 +02:00
Ilya Dryomov e8ef19c4ad crush: eliminate CRUSH_MAX_SET result size limitation
This is only present to size the temporary scratch arrays that we put on
the stack.  Let the caller allocate them as they wish and remove the
limitation.

Reflects ceph.git commit 1cfe140bf2dab99517589a82a916f4c75b9492d1.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:14 +02:00
Ilya Dryomov 2a4ba74ef6 crush: fix some comments
Reflects ceph.git commit 3cef755428761f2481b1dd0e0fbd0464ac483fc5.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:13 +02:00
Ilya Dryomov 8f99c85b7a crush: reduce scope of some local variables
Reflects ceph.git commit e7d47827f0333c96ad43d257607fb92ed4176550.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:12 +02:00
Ilya Dryomov bfb16d7d69 crush: factor out (trivial) crush_destroy_rule()
Reflects ceph.git commit 43a01c9973c4b83f2eaa98be87429941a227ddde.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:11 +02:00
Ilya Dryomov b3b33b0e43 crush: pass weight vector size to map function
Pass the size of the weight vector into crush_do_rule() to ensure that we
don't access values past the end.  This can happen if the caller misbehaves
and passes a weight vector that is smaller than max_devices.

Currently the monitor tries to prevent that from happening, but this will
gracefully tolerate previous bad osdmaps that got into this state.  It's
also a bit more defensive.

Reflects ceph.git commit 5922e2c2b8335b5e46c9504349c3a55b7434c01a.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:10 +02:00
Ilya Dryomov 2b3e0c905a libceph: update ceph_features.h
This updates ceph_features.h so that it has all feature bits defined in
ceph.git.  In the interim since the last update, ceph.git crossed the
"32 feature bits" point, and, the addition of the 33rd bit wasn't
handled correctly.  The work-around is squashed into this commit and
reflects ceph.git commit 053659d05e0349053ef703b414f44965f368b9f0.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:09 +02:00
Ilya Dryomov 12b4629a9f libceph: all features fields must be u64
In preparation for ceph_features.h update, change all features fields
from unsigned int/u32 to u64.  (ceph.git has ~40 feature bits at this
point.)

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-31 20:32:08 +02:00
Josh Durgin 9a1ea2dbff libceph: resend all writes after the osdmap loses the full flag
With the current full handling, there is a race between osds and
clients getting the first map marked full. If the osd wins, it will
return -ENOSPC to any writes, but the client may already have writes
in flight. This results in the client getting the error and
propagating it up the stack. For rbd, the block layer turns this into
EIO, which can cause corruption in filesystems above it.

To avoid this race, osds are being changed to drop writes that came
from clients with an osdmap older than the last osdmap marked full.
In order for this to work, clients must resend all writes after they
encounter a full -> not full transition in the osdmap. osds will wait
for an updated map instead of processing a request from a client with
a newer map, so resent writes will not be dropped by the osd unless
there is another not full -> full transition.

This approach requires both osds and clients to be fixed to avoid the
race. Old clients talking to osds with this fix may hang instead of
returning EIO and potentially corrupting an fs. New clients talking to
old osds have the same behavior as before if they encounter this race.

Fixes: http://tracker.ceph.com/issues/6938

Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 23:04:28 +02:00
Josh Durgin d29adb34a9 libceph: block I/O when PAUSE or FULL osd map flags are set
The PAUSEWR and PAUSERD flags are meant to stop the cluster from
processing writes and reads, respectively. The FULL flag is set when
the cluster determines that it is out of space, and will no longer
process writes.  PAUSEWR and PAUSERD are purely client-side settings
already implemented in userspace clients. The osd does nothing special
with these flags.

When the FULL flag is set, however, the osd responds to all writes
with -ENOSPC. For cephfs, this makes sense, but for rbd the block
layer translates this into EIO.  If a cluster goes from full to
non-full quickly, a filesystem on top of rbd will not behave well,
since some writes succeed while others get EIO.

Fix this by blocking any writes when the FULL flag is set in the osd
client. This is the same strategy used by userspace, so apply it by
default.  A follow-on patch makes this configurable.

__map_request() is called to re-target osd requests in case the
available osds changed.  Add a paused field to a ceph_osd_request, and
set it whenever an appropriate osd map flag is set.  Avoid queueing
paused requests in __map_request(), but force them to be resent if
they become unpaused.

Also subscribe to the next osd map from the monitor if any of these
flags are set, so paused requests can be unblocked as soon as
possible.

Fixes: http://tracker.ceph.com/issues/6079

Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 09:13:29 -08:00
Li Wang 37c89bde5d ceph: Add necessary clean up if invalid reply received in handle_reply()
Wake up possible waiters, invoke the call back if any, unregister the request

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2013-12-13 09:13:29 -08:00
Kent Overstreet f38a5181d9 ceph: Convert to immutable biovecs
Now that we've got a mechanism for immutable biovecs -
bi_iter.bi_bvec_done - we need to convert drivers to use primitives that
respect it instead of using the bvec array directly.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sage Weil <sage@inktank.com>
Cc: ceph-devel@vger.kernel.org
2013-11-23 22:33:52 -08:00
Joe Perches 348662a142 net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Linus Torvalds e9ff04dd94 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph fixes from Sage Weil:
 "These fix several bugs with RBD from 3.11 that didn't get tested in
  time for the merge window: some error handling, a use-after-free, and
  a sequencing issue when unmapping and image races with a notify
  operation.

  There is also a patch fixing a problem with the new ceph + fscache
  code that just went in"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  fscache: check consistency does not decrement refcount
  rbd: fix error handling from rbd_snap_name()
  rbd: ignore unmapped snapshots that no longer exist
  rbd: fix use-after free of rbd_dev->disk
  rbd: make rbd_obj_notify_ack() synchronous
  rbd: complete notifies before cleaning up osd_client and rbd_dev
  libceph: add function to ensure notifies are complete
2013-09-19 12:50:37 -05:00
Josh Durgin dd935f44a4 libceph: add function to ensure notifies are complete
Without a way to flush the osd client's notify workqueue, a watch
event that is unregistered could continue receiving callbacks
indefinitely.

Unregistering the event simply means no new notifies are added to the
queue, but there may still be events in the queue that will call the
watch callback for the event. If the queue is flushed after the event
is unregistered, the caller can be sure no more watch callbacks will
occur for the canceled watch.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2013-09-09 11:15:49 -07:00
Linus Torvalds 6cccc7d301 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
 "This includes both the first pile of Ceph patches (which I sent to
  torvalds@vger, sigh) and a few new patches that add support for
  fscache for Ceph.  That includes a few fscache core fixes that David
  Howells asked go through the Ceph tree.  (Thanks go to Milosz Tanski
  for putting this feature together)

  This first batch of patches (included here) had (has) several
  important RBD bug fixes, hole punch support, several different
  cleanups in the page cache interactions, improvements in the truncate
  code (new truncate mutex to avoid shenanigans with i_mutex), and a
  series of fixes in the synchronous striping read/write code.

  On top of that is a random collection of small fixes all across the
  tree (error code checks and error path cleanup, obsolete wq flags,
  etc)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits)
  ceph: use d_invalidate() to invalidate aliases
  ceph: remove ceph_lookup_inode()
  ceph: trivial buildbot warnings fix
  ceph: Do not do invalidate if the filesystem is mounted nofsc
  ceph: page still marked private_2
  ceph: ceph_readpage_to_fscache didn't check if marked
  ceph: clean PgPrivate2 on returning from readpages
  ceph: use fscache as a local presisent cache
  fscache: Netfs function for cleanup post readpages
  FS-Cache: Fix heading in documentation
  CacheFiles: Implement interface to check cache consistency
  FS-Cache: Add interface to check consistency of a cached object
  rbd: fix null dereference in dout
  rbd: fix buffer size for writes to images with snapshots
  libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc
  rbd: fix I/O error propagation for reads
  ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem
  ceph: allow sync_read/write return partial successed size of read/write.
  ceph: fix bugs about handling short-read for sync read mode.
  ceph: remove useless variable revoked_rdcache
  ...
2013-09-09 09:13:22 -07:00
Sage Weil 9542cf0bf9 libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc
Fix a typo that used the wrong bitmask for the pg.seed calculation.  This
is normally unnoticed because in most cases pg_num == pgp_num.  It is, however,
a bug that is easily corrected.

CC: stable@vger.kernel.org
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <alex.elder@linary.org>
2013-09-03 22:08:10 -07:00
Dan Carpenter dbcae088fa libceph: create_singlethread_workqueue() doesn't return ERR_PTRs
create_singlethread_workqueue() returns NULL on error, and it doesn't
return ERR_PTRs.

I tweaked the error handling a little to be consistent with earlier in
the function.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:31 -07:00
Dan Carpenter b72e19b922 libceph: potential NULL dereference in ceph_osdc_handle_map()
There are two places where we read "nr_maps" if both of them are set to
zero then we would hit a NULL dereference here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:30 -07:00
Dan Carpenter 1874119664 libceph: fix error handling in handle_reply()
We've tried to fix the error paths in this function before, but there
is still a hidden goto in the ceph_decode_need() macro which goes to the
wrong place.  We need to release the "req" and unlock a mutex before
returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:30 -07:00
Li Wang ad7a60de88 ceph: punch hole support
This patch implements fallocate and punch hole support for Ceph kernel client.

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:12:17 -07:00
Tejun Heo 4d1829a59d ceph: WQ_NON_REENTRANT is meaningless and going away
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away.  Remove its usages.

This patch doesn't introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sage Weil <sage@inktank.com>
Cc: ceph-devel@vger.kernel.org
2013-08-09 17:55:29 -07:00
majianpeng 73d9f7eef3 libceph: unregister request in __map_request failed and nofail == false
For nofail == false request, if __map_request failed, the caller does
cleanup work, like releasing the relative pages.  It doesn't make any sense
to retry this request.

CC: stable@vger.kernel.org
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-09 17:52:06 -07:00
Eric Dumazet 64dc61306c net: add sk_stream_is_writeable() helper
Several call sites use the hardcoded following condition :

sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)

Lets use a helper because TCP_NOTSENT_LOWAT support will change this
condition for TCP sockets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24 17:54:48 -07:00
Yan, Zheng 61c5d6bf70 libceph: call r_unsafe_callback when unsafe reply is received
We can't use !req->r_sent to check if OSD request is sent for the
first time, this is because __cancel_request() zeros req->r_sent
when OSD map changes. Rather than adding a new variable to struct
ceph_osd_request to indicate if it's sent for the first time, We
can call the unsafe callback only when unsafe OSD reply is received.
If OSD's first reply is safe, just skip calling the unsafe callback.

The purpose of unsafe callback is adding unsafe request to a list,
so that fsync(2) can wait for the safe reply. fsync(2) doesn't need
to wait for a write(2) that hasn't returned yet. So it's OK to add
request to the unsafe list when the first OSD reply is received.
(ceph_sync_write() returns after receiving the first OSD reply)

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:58 -07:00
Tyler Hicks 2cb33cac62 libceph: Fix NULL pointer dereference in auth client code
A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Cc: stable@vger.kernel.org
2013-07-03 15:32:55 -07:00
Yan, Zheng ccca4e37b1 libceph: fix truncate size calculation
check the "not truncated yet" case

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:45 -07:00
Yan, Zheng eb845ff13a libceph: fix safe completion
handle_reply() calls complete_request() only if the first OSD reply
has ONDISK flag.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:44 -07:00
Alex Elder 4974341eb9 libceph: print more info for short message header
If an osd client response message arrives that has a front section
that's too big for the buffer set aside to receive it, a warning
gets reported and a new buffer is allocated.

The warning says nothing about which connection had the problem.
Add the peer type and number to what gets reported, to be a bit more
informative.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-07-03 15:32:40 -07:00
Alex Elder 96e4dac66f libceph: add lingering request reference when registered
When an osd request is set to linger, the osd client holds onto the
request so it can be re-submitted following certain osd map changes.
The osd client holds a reference to the request until it is
unregistered.  This is used by rbd for watch requests.

Currently, the reference is taken when the request is marked with
the linger flag.  This means that if an error occurs after that
time but before the the request completes successfully, that
reference is leaked.

There's really no reason to take the reference until the request is
registered in the the osd client's list of lingering requests, and
that only happens when the lingering (watch) request completes
successfully.

So take that reference only when it gets registered following
succesful completion, and drop it (as before) when the request
gets unregistered.  This avoids the reference problem on error
in rbd.

Rearrange ceph_osdc_unregister_linger_request() to avoid using
the request pointer after it may have been freed.

And hold an extra reference in kick_requests() while handling
a linger request that has not yet been registered, to ensure
it doesn't go away.

This resolves:
    http://tracker.ceph.com/issues/3859

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-07-03 15:32:37 -07:00
Alex Elder 14d2f38df6 libceph: must hold mutex for reset_changed_osds()
An osd client has a red-black tree describing its osds, and
occasionally we would get crashes due to one of these trees tree
becoming corrupt somehow.

The problem turned out to be that reset_changed_osds() was being
called without protection of the osd client request mutex.  That
function would call __reset_osd() for any osd that had changed, and
__reset_osd() would call __remove_osd() for any osd with no
outstanding requests, and finally __remove_osd() would remove the
corresponding entry from the red-black tree.  Thus, the tree was
getting modified without having any lock protection, and was
vulnerable to problems due to concurrent updates.

This appears to be the only osd tree updating path that has this
problem.  It can be fairly easily fixed by moving the call up
a few lines, to just before the request mutex gets dropped
in kick_requests().

This resolves:
    http://tracker.ceph.com/issues/5043

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-17 12:45:40 -05:00
Alex Elder c10ebbf55b libceph: init sent and completed when starting
The rbd code has a need to be able to restart an osd request that
has already been started and completed once before.  This currently
wouldn't work right because the osd client code assumes an osd
request will be started exactly once  Certain fields in a request
are never cleared and this leads to trouble if you try to reuse it.

Specifically, the r_sent, r_got_reply, and r_completed fields are
never cleared.  The r_sent field records the osd incarnation at the
time the request was sent to that osd.  If that's non-zero, the
message won't get re-mapped to a target osd properly, and won't be
put on the unsafe requests list the first time it's sent as it
should.  The r_got_reply field is used in handle_reply() to ensure
the reply to a request is processed only once.  And the r_completed
field is used for lingering requests to avoid calling the callback
function every time the osd client re-sends the request on behalf of
its initiator.

Each osd request passes through ceph_osdc_start_request() when
responsibility for the request is handed over to the osd client for
completion.  We can safely zero these three fields there each time a
request gets started.

One last related change--clear the r_linger flag when a request
is no longer registered as a linger request.

This resolves:
    http://tracker.ceph.com/issues/5026

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-13 12:52:23 -05:00
Alex Elder 5522ae0b68 libceph: use slab cache for osd client requests
Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:41 -05:00
Alex Elder 81b36be4c5 libceph: allocate ceph message data with a slab allocator
Create a slab cache to manage ceph_msg_data structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:36 -05:00
Alex Elder e3d5d63804 libceph: allocate ceph messages with a slab allocator
Create a slab cache to manage ceph_msg structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:31 -05:00
Alex Elder 4f0dcb10cf libceph: create source file "net/ceph/snapshot.c"
This creates a new source file "net/ceph/snapshot.c" to contain
utility routines related to ceph snapshot contexts.  The main
motivation was to define ceph_create_snap_context() as a common way
to create these structures, but I've moved the definitions of
ceph_get_snap_context() and ceph_put_snap_context() there too.
(The benefit of inlining those is very small, and I'd rather
keep this collection of functions together.)

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:20:08 -07:00
Alex Elder 9ef1ee5a1b libceph: fix byte order mismatch
A WATCH op includes an object version.  The version that's supplied
is incorrectly byte-swapped osd_req_op_watch_init() where it's first
assigned (it's been this way since that code was first added).

The result is that the version sent to the osd is wrong, because
that value gets byte-swapped again in osd_req_encode_op().  This
is the source of a sparse warning related to improper byte order in
the assignment.

The approach of using the version to avoid a race is deprecated
(see http://tracker.ceph.com/issues/3871), and the watch parameter
is no longer even examined by the osd.  So fix the assignment in
osd_req_op_watch_init() so it no longer does the byte swap.

This resolves:
    http://tracker.ceph.com/issues/3847

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:24 -07:00
Alex Elder 6c57b5545d libceph: support pages for class request data
Add the ability to provide an array of pages as outbound request
data for object class method calls.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:06 -07:00
Alex Elder a51b272e9e libceph: fix two messenger bugs
This patch makes four small changes in the ceph messenger.

While getting copyup functionality working I found two bugs in the
messenger.  Existing paths through the code did not trigger these
problems, but they're fixed here:
    - In ceph_msg_data_pagelist_cursor_init(), the cursor's
      last_piece field was being checked against the length
      supplied.  This was OK until this commit: ccba6d98 libceph:
      implement multiple data items in a message That commit changed
      the cursor init routines to allow lengths to be supplied that
      exceeded the size of the current data item. Because of this,
      we have to use the assigned cursor resid field rather than the
      provided length in determining whether the cursor points to
      the last piece of a data item.
    - In ceph_msg_data_add_pages(), a BUG_ON() was erroneously
      catching attempts to add page data to a message if the message
      already had data assigned to it. That was OK until that same
      commit, at which point it was fine for messages to have
      multiple data items. It slipped through because that BUG_ON()
      call was present twice in that function. (You can never be too
      careful.)

In addition two other minor things are changed:
    - In ceph_msg_data_cursor_init(), the local variable "data" was
      getting assigned twice.
    - In ceph_msg_data_advance(), it was assumed that the
      type-specific advance routine would set new_piece to true
      after it advanced past the last piece. That may have been
      fine, but since we check for that case we might as well set it
      explicitly in ceph_msg_data_advance().

This resolves:
    http://tracker.ceph.com/issues/4762

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:05 -07:00
Alex Elder 49719778bf libceph: support raw data requests
Allow osd request ops that aren't otherwise structured (not class,
extent, or watch ops) to specify "raw" data to be used to hold
incoming data for the op.  Make use of this capability for the osd
STAT op.

Prefix the name of the private function osd_req_op_init() with "_",
and expose a new function by that (earlier) name whose purpose is to
initialize osd ops with (only) implied data.

For now we'll just support the use of a page array for an osd op
with incoming raw data.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:00 -07:00
Alex Elder 863c7eb590 libceph: clean up osd data field access functions
There are a bunch of functions defined to encapsulate getting the
address of a data field for a particular op in an osd request.
They're all defined the same way, so create a macro to take the
place of all of them.

Two of these are used outside the osd client code, so preserve them
(but convert them to use the new macro internally).  Stop exporting
the ones that aren't used elsewhere.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:59 -07:00
Alex Elder 406e2c9f92 libceph: kill off osd data write_request parameters
In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:58 -07:00
Alex Elder 26be88087a libceph: change how "safe" callback is used
An osd request currently has two callbacks.  They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.

The only time the second callback is used is in the ceph file system
for a synchronous write.  There's a race that makes some handling of
this case unsafe.  This patch addresses this problem.  The error
handling for this callback is also kind of gross, and this patch
changes that as well.

In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list.  Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns.  The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.

To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*.  So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe).  The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time.  That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.

We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe.  This
will avoid the race because this call will be made under protection
of the osd client's request mutex.  It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.

The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose.  It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.

This resolves the original problem reportedin:
    http://tracker.ceph.com/issues/4706

Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:18:52 -07:00
Alex Elder 04017e29bb libceph: make method call data be a separate data item
Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd.  Instead, encode the
data in a data item separate from the class and method names.

This will allow large amounts of data to be supplied to methods
without copying.  Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list.  But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.

This resolves:
    http://tracker.ceph.com/issues/4104

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:35 -07:00
Alex Elder 90af36022a libceph: add, don't set data for a message
Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:34 -07:00
Alex Elder ca8b3a6917 libceph: implement multiple data items in a message
This patch adds support to the messenger for more than one data item
in its data list.

A message data cursor has two more fields to support this:
    - a count of the number of bytes left to be consumed across
      all data items in the list, "total_resid"
    - a pointer to the head of the list (for validation only)

The cursor initialization routine has been split into two parts: the
outer one, which initializes the cursor for traversing the entire
list of data items; and the inner one, which initializes the cursor
to start processing a single data item.

When a message cursor is first initialized, the outer initialization
routine sets total_resid to the length provided.  The data pointer
is initialized to the first data item on the list.  From there, the
inner initialization routine finishes by setting up to process the
data item the cursor points to.

Advancing the cursor consumes bytes in total_resid.  If the resid
field reaches zero, it means the current data item is fully
consumed.  If total_resid indicates there is more data, the cursor
is advanced to point to the next data item, and then the inner
initialization routine prepares for using that.  (A check is made at
this point to make sure we don't wrap around the front of the list.)

The type-specific init routines are modified so they can be given a
length that's larger than what the data item can support.  The resid
field is initialized to the smaller of the provided length and the
length of the entire data item.

When total_resid reaches zero, we're done.

This resolves:
    http://tracker.ceph.com/issues/3761

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:33 -07:00
Alex Elder 5240d9f95d libceph: replace message data pointer with list
In place of the message data pointer, use a list head which links
through message data items.  For now we only support a single entry
on that list.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:32 -07:00
Alex Elder 8ae4f4f5c0 libceph: have cursor point to data
Rather than having a ceph message data item point to the cursor it's
associated with, have the cursor point to a data item.  This will
allow a message cursor to be used for more than one data item.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:30 -07:00
Alex Elder 36153ec9dd libceph: move cursor into message
A message will only be processing a single data item at a time, so
there's no need for each data item to have its own cursor.

Move the cursor embedded in the message data structure into the
message itself.  To minimize the impact, keep the data->cursor
field, but make it be a pointer to the cursor in the message.

Move the definition of ceph_msg_data above ceph_msg_data_cursor so
the cursor can point to the data without a forward definition rather
than vice-versa.

This and the upcoming patches are part of:
    http://tracker.ceph.com/issues/3761

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:29 -07:00
Alex Elder c851c49591 libceph: record bio length
The bio is the only data item type that doesn't record its full
length.  Fix that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:28 -07:00
Alex Elder f759ebb968 libceph: skip message if too big to receive
We know the length of our message buffers.  If we get a message
that's too long, just dump it and ignore it.  If skip was set
then con->in_msg won't be valid, so be careful not to dereference
a null pointer in the process.

This resolves:
    http://tracker.ceph.com/issues/4664

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:27 -07:00
Alex Elder ea96571f7b libceph: fix possible CONFIG_BLOCK build problem
This patch:
    15a0d7b libceph: record message data length
did not enclose some bio-specific code inside CONFIG_BLOCK as
it should have.  Fix that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:26 -07:00
Alex Elder 5476492fba libceph: kill off osd request r_data_in and r_data_out
Finally!  Convert the osd op data pointers into real structures, and
make the switch over to using them instead of having all ops share
the in and/or out data structures in the osd request.

Set up a new function to traverse the set of ops and release any
data associated with them (pages).

This and the patches leading up to it resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:25 -07:00
Alex Elder ec9123c567 libceph: set the data pointers when encoding ops
Still using the osd request r_data_in and r_data_out pointer, but
we're basically only referring to it via the data pointers in the
osd ops.  And we're transferring that information to the request
or reply message only when the op indicates it's needed, in
osd_req_encode_op().

To avoid a forward reference, ceph_osdc_msg_data_set() was moved up
in the file.

Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(),
because the ops array will already be zeroed anyway.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:24 -07:00
Alex Elder a4ce40a9a7 libceph: combine initializing and setting osd data
This ends up being a rather large patch but what it's doing is
somewhat straightforward.

Basically, this is replacing two calls with one.  The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters.  In place of those two will be a single function that
initializes the op directly.

That means we sort of fan out a set of the needed functions:
    - extent ops with pages data
    - extent ops with pagelist data
    - extent ops with bio list data
and
    - class ops with page data for receiving a response

We also have define another one, but it's only used internally:
    - class ops with pagelist data for request parameters

Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields.  All the osd ops refer to them for
their data.  For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:23 -07:00
Alex Elder 39b44cbe86 libceph: set message data when building osd request
All calls of ceph_osdc_start_request() are preceded (in the case of
rbd, almost) immediately by a call to ceph_osdc_build_request().

Move the build calls at the top of ceph_osdc_start_request() out of
there and into the ceph_osdc_build_request().  Nothing prevents
moving these calls to the top of ceph_osdc_build_request(), either
(and we're going to want them there in the next patch) so put them
at the top.

This and the next patch are related to:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:22 -07:00
Alex Elder e65550fd94 libceph: move ceph_osdc_build_request()
This simply moves ceph_osdc_build_request() later in its source
file without any change.  Done as a separate patch to facilitate
review of the change in the next patch.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:21 -07:00
Alex Elder 5f562df5f5 libceph: format class info at init time
An object class method is formatted using a pagelist which contains
the class name, the method name, and the data concatenated into an
osd request's outbound data.

Currently when a class op is initialized in osd_req_op_cls_init(),
the lengths of and pointers to these three items are recorded.
Later, when the op is getting formatted into the request message, a
new pagelist is created and that is when these items get copied into
the pagelist.

This patch makes it so the pagelist to hold these items is created
when the op is initialized instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:19 -07:00
Alex Elder c99d2d4abb libceph: specify osd op by index in request
An osd request now holds all of its source op structures, and every
place that initializes one of these is in fact initializing one
of the entries in the the osd request's array.

So rather than supplying the address of the op to initialize, have
caller specify the osd request and an indication of which op it
would like to initialize.  This better hides the details the
op structure (and faciltates moving the data pointers they use).

Since osd_req_op_init() is a common routine, and it's not used
outside the osd client code, give it static scope.  Also make
it return the address of the specified op (so all the other
init routines don't have to repeat that code).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:15 -07:00
Alex Elder 8c042b0df9 libceph: add data pointers in osd op structures
An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message.  Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.

Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message.  The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.

Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient.  Add some assertions to verify
pointers are always set the way they're expected to be.

This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.

This is the first in a series of patches that resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:14 -07:00
Alex Elder 54d5064912 libceph: rename data out field in osd request op
There are fields "indata" and "indata_len" defined the ceph osd
request op structure.  The "in" part is with from the point of view
of the osd server, but is a little confusing here on the client
side.  Change their names to use "request" instead of "in" to
indicate that it defines data provided with the request (as opposed
the data returned in the response).

Rename the local variable in osd_req_encode_op() to match.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:13 -07:00
Alex Elder 79528734f3 libceph: keep source rather than message osd op array
An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:12 -07:00
Alex Elder 23c08a9cb2 libceph: define ceph_osd_data_length()
One more osd data helper, which returns the length of the
data item, regardless of its type.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:09 -07:00
Alex Elder c54d47bfad libceph: define a few more helpers
Define ceph_osd_data_init() and ceph_osd_data_release() to clean up
a little code.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:08 -07:00
Alex Elder 43bfe5de9f libceph: define osd data initialization helpers
Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:06 -07:00
Alex Elder 9fc6e06471 libceph: compute incoming bytes once
This is a simple change, extracting the number of incoming data
bytes just once in handle_reply().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:05 -07:00
Alex Elder 98fa5dd883 libceph: provide data length when preparing message
In prepare_message_data(), the length used to initialize the cursor
is taken from the header of the message provided.  I'm working
toward not using the header data length field to determine length in
outbound messages, and this is a step in that direction.  For
inbound messages this will be set to be the actual number of bytes
that are arriving (which may be less than the total size of the data
buffer available).

This resolves:
    http://tracker.ceph.com/issues/4589

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:03 -07:00
Alex Elder e5975c7c8e ceph: build osd request message later for writepages
Hold off building the osd request message in ceph_writepages_start()
until just before it will be submitted to the osd client for
execution.

We'll still create the request and allocate the page pointer array
after we learn we have at least one page to write.  A local variable
will be used to keep track of the allocated array of pages.  Wait
until just before submitting the request for assigning that page
array pointer to the request message.

Create ands use a new function osd_req_op_extent_update() whose
purpose is to serve this one spot where the length value supplied
when an osd request's op was initially formatted might need to get
changed (reduced, never increased) before submitting the request.

Previously, ceph_writepages_start() assigned the message header's
data length because of this update.  That's no longer necessary,
because ceph_osdc_build_request() will recalculate the right
value to use based on the content of the ops in the request.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:02 -07:00
Alex Elder 02ee07d300 libceph: hold off building osd request
Defer building the osd request until just before submitting it in
all callers except ceph_writepages_start().  (That caller will be
handed in the next patch.)

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:01 -07:00
Alex Elder acead002b2 libceph: don't build request in ceph_osdc_new_request()
This patch moves the call to ceph_osdc_build_request() out of
ceph_osdc_new_request() and into its caller.

This is in order to defer formatting osd operation information into
the request message until just before request is started.

The only unusual (ab)user of ceph_osdc_build_request() is
ceph_writepages_start(), where the final length of write request may
change (downward) based on the current inode size or the oldest
snapshot context with dirty data for the inode.

The remaining callers don't change anything in the request after has
been built.

This means the ops array is now supplied by the caller.  It also
means there is no need to pass the mtime to ceph_osdc_new_request()
(it gets provided to ceph_osdc_build_request()).  And rather than
passing a do_sync flag, have the number of ops in the ops array
supplied imply adding a second STARTSYNC operation after the READ or
WRITE requested.

This and some of the patches that follow are related to having the
messenger (only) be responsible for filling the content of the
message header, as described here:
    http://tracker.ceph.com/issues/4589

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:58 -07:00
Alex Elder a193080481 libceph: record message data length
Keep track of the length of the data portion for a message in a
separate field in the ceph_msg structure.  This information has
been maintained in wire byte order in the message header, but
that's going to change soon.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:57 -07:00
Alex Elder ace6d3a96f libceph: drop ceph_osd_request->r_con_filling_msg
A field in an osd request keeps track of whether a connection is
currently filling the request's reply message.  This patch gets rid
of that field.

An osd request includes two messages--a request and a reply--and
they're both associated with the connection that existed to its
the target osd at the time the request was created.

An osd request can be dropped early, even when it's in flight.
And at that time both messages are released.  It's possible the
reply message has been supplied to its connection to receive
an incoming response message at the time the osd request gets
dropped.  So ceph_osdc_release_request() revokes that message
from the connection before releasing it so things get cleaned up
properly.

Previously this may have caused a problem, because the connection
that a message was associated with might have gone away before the
revoke request.  And to avoid any problems using that connection,
the osd client held a reference to it when it supplies its response
message.

However since this commit:
    38941f80 libceph: have messages point to their connection
all messages hold a reference to the connection they are associated
with whenever the connection is actively operating on the message
(i.e. while the message is queued to send or sending, and when it
data is being received into it).  And if a message has no connection
associated with it, ceph_msg_revoke_incoming() won't do anything
when asked to revoke it.

As a result, there is no need to keep an additional reference to the
connection associated with a message when we hand the message to the
messenger when it calls our alloc_msg() method to receive something.
If the connection *were* operating on it, it would have its own
reference, and if not, there's no work to be done when we need to
revoke it.

So get rid of the osd request's r_con_filling_msg field.

This resolves:
    http://tracker.ceph.com/issues/4647

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:54 -07:00
Alex Elder ef4859d647 libceph: define ceph_decode_pgid() only once
There are two basically identical definitions of __decode_pgid()
in libceph, one in "net/ceph/osdmap.c" and the other in
"net/ceph/osd_client.c".  Get rid of both, and instead define
a single inline version in "include/linux/ceph/osdmap.h".

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:52 -07:00
Alex Elder 8058fd4503 libceph: drop mutex on error in handle_reply()
The osd client mutex is acquired just before getting a reference to
a request in handle_reply().  However the error paths after that
don't drop the mutex before returning as they should.

Drop the mutex after dropping the request reference.  Also add a
bad_mutex label at that point and use it so the failed request
lookup case can be handled with the rest.

This resolves:
    http://tracker.ceph.com/issues/4615

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:17:51 -07:00
Alex Elder b0270324c5 libceph: use osd_req_op_extent_init()
Use osd_req_op_extent_init() in ceph_osdc_new_request() to
initialize the one or two ops built in that function.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:49 -07:00
Alex Elder d18d1e2807 libceph: clean up ceph_osd_new_request()
All callers of ceph_osd_new_request() pass either CEPH_OSD_OP_READ
or CEPH_OSD_OP_WRITE as the opcode value.  The function assumes it
by filling in the extent fields in the ops array it builds.  So just
assert that is the case, and don't bother calling op_has_extent()
before filling in the first osd operation in the array.

Define some local variables to gather the information to fill into
the first op, and then fill in the op array all in one place.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:48 -07:00
Alex Elder a19dadfba9 libceph: don't update op in calc_layout()
The ceph_osdc_new_request() an array of osd operations is built up
and filled in partially within that function and partially in the
called function calc_layout().  Move the latter part back out to
ceph_osdc_new_request() so it's all done in one place.  This makes
it unnecessary to pass the op pointer to calc_layout(), so get rid
of that parameter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:47 -07:00
Alex Elder 75d1c941e5 libceph: pass offset and length out of calc_layout()
The purpose of calc_layout() is to determine, given a file offset
and length and a layout describing the placement of file data across
objects, where in "object space" that data resides.

Specifically, it determines which object should hold the first part
of the specified range of file data, and the offset and length of
data within that object.  The length will not exceed the bounds
of the object, and the caller is informed of that maximum length.

Add two parameters to calc_layout() to allow the object-relative
offset and length to be passed back to the caller.

This is the first steps toward having ceph_osdc_new_request() build
its osd op structure using osd_req_op_extent_init().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:46 -07:00
Alex Elder 33803f3300 libceph: define source request op functions
The rbd code has a function that allocates and populates a
ceph_osd_req_op structure (the in-core version of an osd request
operation).  When reviewed, Josh suggested two things: that the
big varargs function might be better split into type-specific
functions; and that this functionality really belongs in the osd
client rather than rbd.

This patch implements both of Josh's suggestions.  It breaks
up the rbd function into separate functions and defines them
in the osd client module as exported interfaces.  Unlike the
rbd version, however, the functions don't allocate an osd_req_op
structure; they are provided the address of one and that is
initialized instead.

The rbd function has been eliminated and calls to it have been
replaced by calls to the new routines.  The rbd code now now use a
stack (struct) variable to hold the op rather than allocating and
freeing it each time.

For now only the capabilities used by rbd are implemented.
Implementing all the other osd op types, and making the rest of the
code use it will be done separately, in the next few patches.

Note that only the extent, cls, and watch portions of the
ceph_osd_req_op structure are currently used.  Delete the others
(xattr, pgls, and snap) from its definition so nobody thinks it's
actually implemented or needed.  We can add it back again later
if needed, when we know it's been tested.

This (and a few follow-on patches) resolves:
    http://tracker.ceph.com/issues/3861

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:45 -07:00
Alex Elder a8dd0a37bc libceph: define osd_req_opcode_valid()
Define a separate function to determine the validity of an opcode,
and use it inside osd_req_encode_op() in order to unclutter that
function.

Don't update the destination op at all--and return zero--if an
unsupported or unrecognized opcode is seen in osd_req_encode_op().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:44 -07:00
Alex Elder 0baa1bd9b6 libceph: be explicit in masking bottom 16 bits
In ceph_osdc_build_request() there is a call to cpu_to_le16() which
provides a 64-bit value as its argument.  Because of the implied
byte swapping going on it looked pretty suspect to me.

At the moment it turns out the behavior is well defined, but masking
off those bottom bits explicitly eliminates this distraction, and is
in fact more directly related to the purpose of the message header's
data_off field.

This resolves:
    http://tracker.ceph.com/issues/4125

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:41 -07:00
Alex Elder 56fc565916 libceph: account for alignment in pages cursor
When a cursor for a page array data message is initialized it needs
to determine the initial value for cursor->last_piece.  Currently it
just checks if length is less than a page, but that's not correct.
The data in the first page in the array will be offset by a page
offset based on the alignment recorded for the data.  (All pages
thereafter will be aligned at the base of the page, so there's
no need to account for this except for the first page.)

Because this was wrong, there was a case where the length of a piece
would be calculated as all of the residual bytes in the message and
that plus the page offset could exceed the length of a page.

So fix this case.  Make sure the sum won't wrap.

This resolves a third issue described in:
    http://tracker.ceph.com/issues/4598

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:17:40 -07:00
Alex Elder 5df521b1ee libceph: page offset must be less than page size
Currently ceph_msg_data_pages_advance() allows the page offset value
to be PAGE_SIZE, apparently assuming ceph_msg_data_pages_next() will
treat it as 0.  But that doesn't happen, and the result led to a
helpful assertion failure.

Change ceph_msg_data_pages_advance() to truncate the offset to 0
before returning if it reaches PAGE_SIZE.

Make a few other minor adjustments in this area (comments and a
better assertion) while modifying it.

This resolves a second issue described in:
    http://tracker.ceph.com/issues/4598

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:17:39 -07:00
Alex Elder 1190bf06a6 libceph: fix broken data length assertions
It's OK for the result of a read to come back with fewer bytes than
were requested.  So don't trigger a BUG() in that case when
initializing the data cursor.

This resolves the first problem described in:
    http://tracker.ceph.com/issues/4598

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:17:38 -07:00
Alex Elder 6644ed7b7e libceph: make message data be a pointer
Begin the transition from a single message data item to a list of
them by replacing the "data" structure in a message with a pointer
to a ceph_msg_data structure.

A null pointer will indicate the message has no data; replace the
use of ceph_msg_has_data() with a simple check for a null pointer.

Create functions ceph_msg_data_create() and ceph_msg_data_destroy()
to dynamically allocate and free a data item structure of a given type.

When a message has its data item "set," allocate one of these to
hold the data description, and free it when the last reference to
the message is dropped.

This partially resolves:
    http://tracker.ceph.com/issues/4429

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:37 -07:00
Alex Elder 8ea299bcbc libceph: use only ceph_msg_data_advance()
The *_msg_pos_next() functions do little more than call
ceph_msg_data_advance().  Replace those wrapper functions with
a simple call to ceph_msg_data_advance().

This cleanup is related to:
    http://tracker.ceph.com/issues/4428

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:36 -07:00