This commit enables ftrace in the rcuperf TREE kernel build and adds
an ftrace_dump() at the end of rcuperf processing. This data will be
used to measure the actual durations of the expedited grace periods
without the added delays inherent in the kernel-module measurements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit forces more deterministic update-side behavior by setting
rcuperf's rcu_perf_writer() kthreads to real-time priority.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit forces more deterministic behavior by binding rcuperf's
rcu_perf_reader() and rcu_perf_writer() kthreads to their respective
CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a new rcuperf module that carries out simple performance
tests of RCU grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit provides rcu_exp_batches_completed() and
rcu_exp_batches_completed_sched() functions to allow torture-test modules
to check how many expedited grace period batches have completed.
These are analogous to the existing rcu_batches_completed(),
rcu_batches_completed_bh(), and rcu_batches_completed_sched() functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcu_torture_writer() checks only for rcu_gp_is_expedited()
when deciding whether or not to do dynamic control of RCU expediting.
This means that if rcupdate.rcu_normal is specified, rcu_torture_writer()
will attempt to dynamically control RCU expediting, but will nonetheless
only test normal RCU grace periods. This commit therefore adds a check
for !rcu_gp_is_normal(), and prints a message and desists from testing
dynamic control of RCU expediting when doing so is futile.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If it is necessary to kick the grace-period kthread, that is a good
time to dump the trace buffer in order to learn why kicking was needed.
This commit therefore does the dump.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, we have four versions of rcu_read_lock_sched_held(), depending
on the combined choices on PREEMPT_COUNT and DEBUG_LOCK_ALLOC. However,
there is an existing function preemptible() that already distinguishes
between the PREEMPT_COUNT=y and PREEMPT_COUNT=n cases, and allows these
four implementations to be consolidated down to two.
This commit therefore uses preemptible() to achieve this consolidation.
Note that there could be a small performance regression in the case
of CONFIG_DEBUG_LOCK_ALLOC=y && PREEMPT_COUNT=n. However, given the
overhead associated with CONFIG_DEBUG_LOCK_ALLOC=y, this should be
down in the noise.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Recent kernels can fail to awaken the grace-period kthread for
quiescent-state forcing. This commit is a crude hack that does
a wakeup if a scheduling-clock interrupt sees that it has been
too long since force-quiescent-state (FQS) processing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the force-quiescent-state (FQS) code in rcu_gp_kthread() can
advance the next FQS even if one was not executed last time. This can
happen due timeout-duration uncertainty. This commit therefore avoids
advancing the FQS schedule unless an FQS was just executed. In the
corner case where an FQS was not executed, but is due now, the code does
a one-jiffy wait.
This change prepares for kthread kicking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Recent kernels can fail to awaken the grace-period kthread for
quiescent-state forcing. This commit is a crude hack that does
a wakeup any time a stall is detected.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current expedited grace-period implementation makes subsequent grace
periods wait on wakeups for the prior grace period. This does not fit
the dictionary definition of "expedited", so this commit allows these two
phases to overlap. Doing this requires four waitqueues rather than two
because tasks can now be waiting on the previous, current, and next grace
periods. The fourth waitqueue makes the bit masking work out nicely.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit pulls the grace-period-start counter adjustment and tracing
from synchronize_rcu_expedited() and synchronize_sched_expedited()
into exp_funnel_lock(), thus eliminating some code duplication.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves some duplicate code from synchronize_rcu_expedited()
and synchronize_sched_expedited() into rcu_exp_gp_seq_snap(). This
doesn't save lines of code, but does eliminate a "tell me twice" issue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, synchronize_rcu_expedited() and rcu_sched_expedited() have
significant duplicate code. This commit therefore consolidates some of
this code into rcu_exp_wake(), which is now renamed to rcu_exp_wait_wake()
in recognition of its added responsibilities.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit speeds up the low-contention case, especially for systems
with large rcu_node trees, by attempting to directly acquire the
->exp_mutex. This fastpath checks the leaves and root first in
order to avoid excessive memory contention on the mutex itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current mutex-based funnel-locking approach used by expedited grace
periods is subject to severe unfairness. The problem arises when a
few tasks, making a path from leaves to root, all wake up before other
tasks do. A new task can then follow this path all the way to the root,
which needlessly delays tasks whose grace period is done, but who do
not happen to acquire the lock quickly enough.
This commit avoids this problem by maintaining per-rcu_node wait queues,
along with a per-rcu_node counter that tracks the latest grace period
sought by an earlier task to visit this node. If that grace period
would satisfy the current task, instead of proceeding up the tree,
it waits on the current rcu_node structure using a pair of wait queues
provided for that purpose. This decouples awakening of old tasks from
the arrival of new tasks.
If the wakeups prove to be a bottleneck, additional kthreads can be
brought to bear for that purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The cpu_online() function can return values other than 0 and 1, which
can result in subscript overflow when applied to a two-element array.
This commit allows for this behavior by using "!!" on the return value
from cpu_online() when used as a subscript.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit #cdacbe1f91264 ("rcu: Add fastpath bypassing funnel locking")
turns out to be a pessimization at high load because it forces a tree
full of tasks to wait for an expedited grace period that they probably
do not need. This commit therefore removes this optimization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit brings the synchronize_rcu_expedited() function's header
comment into line with the new implementation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although cond_resched_rcu_qs() supplies quiescent states to all flavors
of normal RCU grace periods, it does nothing for expedited RCU-sched
grace periods. This commit therefore adds a check for a need for a
quiescent state from the current CPU by an expedited RCU-sched grace
period, and invokes rcu_sched_qs() to supply that quiescent state if so.
Note that the check is racy in that we might be migrated to some other
CPU just after checking the per-CPU variable. This is OK because the
act of migration will do a context switch, which will supply the needed
quiescent state. The only downside is that we might do an unnecessary
call to rcu_sched_qs(), but the probability is low and the overhead
is small.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, synchronize_sched_expedited_wait() simply sets the ndetected
variable to the rcu_print_task_exp_stall() return value. This means
that if the last rcu_node structure has no stalled tasks, record of
any stalled tasks in previous rcu_node structures is lost, which can
in turn result in failure to dump out the blocking rcu_node structures.
Or could, had the test been correct.
This commit therefore adds the return value of rcu_print_task_exp_stall()
to ndetected and corrects the later test for ndetected.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, sync_sched_exp_handler() will force a reschedule unless
this CPU has already checked in or unless a reschedule has already
been called for. This is clearly wasteful if sync_sched_exp_handler()
interrupted an idle CPU, so this commit immediately reports the
quiescent state in that case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit consolidates a couple definitions and several calls for
single-shot ftrace-buffer dumping.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing). Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system. A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/). However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.
kcov does not aim to collect as much coverage as possible. It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g. scheduler, locking).
Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes. Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch). I've
dropped the second mode for simplicity.
This patch adds the necessary support on kernel side. The complimentary
compiler support was added in gcc revision 231296.
We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:
https://github.com/google/syzkaller/wiki/Found-Bugs
We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation". For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.
Why not gcov. Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat. A
typical coverage can be just a dozen of basic blocks (e.g. an invalid
input). In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M). Cost of
kcov depends only on number of executed basic blocks/edges. On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.
kcov exposes kernel PCs and control flow to user-space which is
insecure. But debugfs should not be mapped as user accessible.
Based on a patch by Quentin Casasnovas.
[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge first patch-bomb from Andrew Morton:
- some misc things
- ofs2 updates
- about half of MM
- checkpatch updates
- autofs4 update
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
autofs4: fix string.h include in auto_dev-ioctl.h
autofs4: use pr_xxx() macros directly for logging
autofs4: change log print macros to not insert newline
autofs4: make autofs log prints consistent
autofs4: fix some white space errors
autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
autofs4: fix coding style line length in autofs4_wait()
autofs4: fix coding style problem in autofs4_get_set_timeout()
autofs4: coding style fixes
autofs: show pipe inode in mount options
kallsyms: add support for relative offsets in kallsyms address table
kallsyms: don't overload absolute symbol type for percpu symbols
x86: kallsyms: disable absolute percpu symbols on !SMP
checkpatch: fix another left brace warning
checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
checkpatch: warn on bare unsigned or signed declarations without int
checkpatch: exclude asm volatile from complex macro check
mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
mm: migrate: consolidate mem_cgroup_migrate() calls
mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
...
$ make tags
GEN tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"
Which are all the result of the DEFINE_PER_CPU pattern:
scripts/tags.sh:200: '/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
scripts/tags.sh:201: '/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'
The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cpu hotplug updates from Thomas Gleixner:
"This is the first part of the ongoing cpu hotplug rework:
- Initial implementation of the state machine
- Runs all online and prepare down callbacks on the plugged cpu and
not on some random processor
- Replaces busy loop waiting with completions
- Adds tracepoints so the states can be followed"
More detailed commentary on this work from an earlier email:
"What's wrong with the current cpu hotplug infrastructure?
- Asymmetry
The hotplug notifier mechanism is asymmetric versus the bringup and
teardown. This is mostly caused by the notifier mechanism.
- Largely undocumented dependencies
While some notifiers use explicitely defined notifier priorities,
we have quite some notifiers which use numerical priorities to
express dependencies without any documentation why.
- Control processor driven
Most of the bringup/teardown of a cpu is driven by a control
processor. While it is understandable, that preperatory steps,
like idle thread creation, memory allocation for and initialization
of essential facilities needs to be done before a cpu can boot,
there is no reason why everything else must run on a control
processor. Before this patch series, bringup looks like this:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
bring the rest up
- All or nothing approach
There is no way to do partial bringups. That's something which is
really desired because we waste e.g. at boot substantial amount of
time just busy waiting that the cpu comes to life. That's stupid
as we could very well do preparatory steps and the initial IPI for
other cpus and then go back and do the necessary low level
synchronization with the freshly booted cpu.
- Minimal debuggability
Due to the notifier based design, it's impossible to switch between
two stages of the bringup/teardown back and forth in order to test
the correctness. So in many hotplug notifiers the cancel
mechanisms are either not existant or completely untested.
- Notifier [un]registering is tedious
To [un]register notifiers we need to protect against hotplug at
every callsite. There is no mechanism that bringup/teardown
callbacks are issued on the online cpus, so every caller needs to
do it itself. That also includes error rollback.
What's the new design?
The base of the new design is a symmetric state machine, where both
the control processor and the booting/dying cpu execute a well
defined set of states. Each state is symmetric in the end, except
for some well defined exceptions, and the bringup/teardown can be
stopped and reversed at almost all states.
So the bringup of a cpu will look like this in the future:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
bring itself up
The synchronization step does not require the control cpu to wait.
That mechanism can be done asynchronously via a worker or some
other mechanism.
The teardown can be made very similar, so that the dying cpu cleans
up and brings itself down. Cleanups which need to be done after
the cpu is gone, can be scheduled asynchronously as well.
There is a long way to this, as we need to refactor the notion when a
cpu is available. Today we set the cpu online right after it comes
out of the low level bringup, which is not really correct.
The proper mechanism is to set it to available, i.e. cpu local
threads, like softirqd, hotplug thread etc. can be scheduled on that
cpu, and once it finished all booting steps, it's set to online, so
general workloads can be scheduled on it. The reverse happens on
teardown. First thing to do is to forbid scheduling of general
workloads, then teardown all the per cpu resources and finally shut it
off completely.
This patch series implements the basic infrastructure for this at the
core level. This includes the following:
- Basic state machine implementation with well defined states, so
ordering and prioritization can be expressed.
- Interfaces to [un]register state callbacks
This invokes the bringup/teardown callback on all online cpus with
the proper protection in place and [un]installs the callbacks in
the state machine array.
For callbacks which have no particular ordering requirement we have
a dynamic state space, so that drivers don't have to register an
explicit hotplug state.
If a callback fails, the code automatically does a rollback to the
previous state.
- Sysfs interface to drive the state machine to a particular step.
This is only partially functional today. Full functionality and
therefor testability will be achieved once we converted all
existing hotplug notifiers over to the new scheme.
- Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying
processor:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
wait for boot
bring itself up
Signal completion to control cpu
In a previous step of this work we've done a full tree mechanical
conversion of all hotplug notifiers to the new scheme. The balance
is a net removal of about 4000 lines of code.
This is not included in this series, as we decided to take a
different approach. Instead of mechanically converting everything
over, we will do a proper overhaul of the usage sites one by one so
they nicely fit into the symmetric callback scheme.
I decided to do that after I looked at the ugliness of some of the
converted sites and figured out that their hotplug mechanism is
completely buggered anyway. So there is no point to do a
mechanical conversion first as we need to go through the usage
sites one by one again in order to achieve a full symmetric and
testable behaviour"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
cpu/hotplug: Document states better
cpu/hotplug: Fix smpboot thread ordering
cpu/hotplug: Remove redundant state check
cpu/hotplug: Plug death reporting race
rcu: Make CPU_DYING_IDLE an explicit call
cpu/hotplug: Make wait for dead cpu completion based
cpu/hotplug: Let upcoming cpu bring itself fully up
arch/hotplug: Call into idle with a proper state
cpu/hotplug: Move online calls to hotplugged cpu
cpu/hotplug: Create hotplug threads
cpu/hotplug: Split out the state walk into functions
cpu/hotplug: Unpark smpboot threads from the state machine
cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
cpu/hotplug: Implement setup/removal interface
cpu/hotplug: Make target state writeable
cpu/hotplug: Add sysfs state interface
cpu/hotplug: Hand in target state to _cpu_up/down
cpu/hotplug: Convert the hotplugged cpu work to a state machine
cpu/hotplug: Convert to a state machine for the control processor
cpu/hotplug: Add tracepoints
...
Make the RCU CPU_DYING_IDLE callback an explicit function call, so it gets
invoked at the proper place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.870167933@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As of commit dae6e64d2b ("rcu: Introduce proper blocking to no-CBs kthreads
GP waits") the RCU subsystem started making use of wait queues.
Here we convert all additions of RCU wait queues to use simple wait queues,
since they don't need the extra overhead of the full wait queue features.
Originally this was done for RT kernels[1], since we would get things like...
BUG: sleeping function called from invalid context at kernel/rtmutex.c:659
in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt
Pid: 8, comm: rcu_preempt Not tainted
Call Trace:
[<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0
[<ffffffff817d77b4>] rt_spin_lock+0x24/0x50
[<ffffffff8106fcf6>] __wake_up+0x36/0x70
[<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680
[<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50
[<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80
[<ffffffff8105eabb>] kthread+0xdb/0xe0
[<ffffffff8106b912>] ? finish_task_switch+0x52/0x100
[<ffffffff817e0754>] kernel_thread_helper+0x4/0x10
[<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60
[<ffffffff817e0750>] ? gs_change+0xb/0xb
...and hence simple wait queues were deployed on RT out of necessity
(as simple wait uses a raw lock), but mainline might as well take
advantage of the more streamline support as well.
[1] This is a carry forward of work from v3.10-rt; the original conversion
was by Thomas on an earlier -rt version, and Sebastian extended it to
additional post-3.10 added RCU waiters; here I've added a commit log and
unified the RCU changes into one, and uprev'd it to match mainline RCU.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-rt-users@vger.kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently,
this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will
not enable the IRQs. lockdep is happy.
By switching over using swait this is not true anymore. swake_up_all()
enables the IRQs while processing the waiters. __do_softirq() can now
run and will eventually call rcu_process_callbacks() which wants to
grap nrp->lock.
Let's move the rcu_nocb_gp_cleanup() call outside the lock before we
switch over to swait.
If we would hold the rnp->lock and use swait, lockdep reports
following:
=================================
[ INFO: inconsistent lock state ]
4.2.0-rc5-00025-g9a73ba0 #136 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes:
(rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0
{IN-SOFTIRQ-W} state was registered at:
[<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0
[<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0
[<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0
[<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0
[<ffffffff810b1a9d>] __do_softirq+0x14d/0x670
[<ffffffff810b2214>] irq_exit+0x104/0x110
[<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60
[<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80
[<ffffffff810dba66>] rq_attach_root+0xa6/0x100
[<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650
[<ffffffff810e4b42>] build_sched_domains+0x942/0xb00
[<ffffffff821777c2>] sched_init_smp+0x509/0x5c1
[<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f
[<ffffffff8182cdce>] kernel_init+0xe/0xe0
[<ffffffff8184231f>] ret_from_fork+0x3f/0x70
irq event stamp: 76
hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60
hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90
softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0
softirqs last disabled at (0): [< (null)>] (null)
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rcu_node_1);
<Interrupt>
lock(rcu_node_1);
*** DEADLOCK ***
1 lock held by rcu_preempt/8:
#0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0
stack backtrace:
CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 #136
Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014
0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0
0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b
0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f
Call Trace:
[<ffffffff818379e0>] dump_stack+0x4f/0x7b
[<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0
[<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50
[<ffffffff811087ad>] mark_lock+0x66d/0x6e0
[<ffffffff81107790>] ? check_usage_forwards+0x150/0x150
[<ffffffff81108898>] mark_held_locks+0x78/0xa0
[<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60
[<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220
[<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10
[<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60
[<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0
[<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0
[<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220
[<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60
[<ffffffff81137c30>] ? rcu_barrier+0x20/0x20
[<ffffffff810d2014>] kthread+0x104/0x120
[<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60
[<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260
[<ffffffff8184231f>] ret_from_fork+0x3f/0x70
[<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-rt-users@vger.kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit exports rcu_gp_is_normal() in order to allow it to be used
by rcutorture and rcuperf.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The Kconfig currently controlling compilation of this code is:
init/Kconfig:config TINY_RCU
init/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the code there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit. We could
consider moving this to an earlier initcall (subsys?) if desired.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In patch:
"rcu: Add transitivity to remaining rcu_node ->lock acquisitions"
All locking operations on rcu_node::lock are replaced with the wrappers
because of the need of transitivity, which indicates we should never
write code using LOCK primitives alone(i.e. without a proper barrier
following) on rcu_node::lock outside those wrappers. We could detect
this kind of misuses on rcu_node::lock in the future by adding __private
modifier on rcu_node::lock.
To privatize rcu_node::lock, unlock wrappers are also needed. Replacing
spinlock unlocks with these wrappers not only privatizes rcu_node::lock
but also makes it easier to figure out critical sections of rcu_node.
This patch adds __private modifier to rcu_node::lock and makes every
access to it wrapped by ACCESS_PRIVATE(). Besides, unlock wrappers are
added and raw_spin_unlock(&rnp->lock) and its friends are replaced with
those wrappers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The related warning from gcc 6.0:
In file included from kernel/rcu/tree.c:4630:0:
kernel/rcu/tree_plugin.h:810:40: warning: ‘rcu_data_p’ defined but not used [-Wunused-const-variable]
static struct rcu_data __percpu *const rcu_data_p = &rcu_sched_data;
^~~~~~~~~~
Also remove always redundant rcu_data_p in tree.c.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "Disabled dynamic grace-period expediting" console message is
currently printed unconditionally. This commit causes it to be
output only when it is impossible to switch between normal and
expedited grace periods, which was the original intent.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit #e3663b1024d1 ("rcu: Handle gpnum/completed wrap while dyntick
idle") sets rdp->gpwrap on the wrong side of the "if" statement in
dyntick_save_progress_counter(), that is, it sets it when the CPU is
not idle instead of when it is idle. Of course, if the CPU is not idle,
its rdp->gpnum won't be lagging beind the global rsp->gpnum, which means
that rdp->gpwrap will never be set.
This commit therefore moves this code to the proper leg of that "if"
statement. This change means that the "else" cause is just "return 0"
and the "then" clause ends with "return 1", so also move the "return 0"
to follow the "if", dropping the "else" clause.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 4a81e8328d ("Reduce overhead of cond_resched() checks for RCU")
handles the error case where a nohz_full loops indefinitely in the kernel
with the scheduling-clock interrupt disabled. However, this handling
includes IPIing the CPU running the offending loop, which is not what
we want for real-time workloads. And there are starting to be real-time
CPU-bound in-kernel workloads, and these must be handled without IPIing
the CPU, at least not in the common case. Therefore, this situation can
no longer be dismissed as an error case.
This commit therefore splits the handling out, so that the setting of
bits in the per-CPU rcu_sched_qs_mask variable is done relatively early,
but if the problem persists, resched_cpu() is eventually used to IPI the
CPU containing the offending loop. Assuming that in-kernel CPU-bound
loops used by real-time tasks contain frequent calls cond_resched_rcu_qs()
(as in more than once per few tens of milliseconds), the real-time tasks
will never be IPIed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
The header comment for rcu_report_qs_rsp() was obsolete, dating well
before the advent of RCU grace-period kthreads. This commit therefore
brings this comment back into alignment with current reality.
Reported-by: Lihao Liang <lihao.liang@cs.ox.ac.uk>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A zero seems to have escaped earlier true/false substitution efforts,
so this commit changes 0 to false for the ->core_needs_qs boolean field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The return value from rcu_gp_init() is always used as a bool, so
this commit makes it be a bool.
Reported-by: Iftekhar Ahmed <ahmedi@oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch removes a potential deadlock hazard by moving the
wake_up_process() in rcu_spawn_gp_kthread() out from under rnp->lock.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit replaces a local_irq_save()/local_irq_restore() pair with
a lockdep assertion that interrupts are already disabled. This should
remove the corresponding overhead from the interrupt entry/exit fastpaths.
This change was inspired by the fact that Iftekhar Ahmed's mutation
testing showed that removing rcu_irq_enter()'s call to local_ird_restore()
had no effect, which might indicate that interrupts were always enabled
anyway.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The cpu_needs_another_gp() function is currently of type int, but only
returns zero or one. Bow to reality and make it be of type bool.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the rcu_state structure's ->rda field is compile-time initialized,
there is no need to pass the per-CPU rcu_data structure into rcu_init_one().
This commit therefore eliminates this now-unused parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_expedited, rcu_normal, and rcu_normal_after_boot kernel boot
parameters are pointless in the case of TINY_RCU because in that case
synchronous grace periods, both expedited and normal, are no-ops.
However, these three symbols contribute several hundred bytes of bloat.
This commit therefore uses CPP directives to avoid compiling this code
in TINY_RCU kernels.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, ->gp_state is printed as an integer, which slows debugging.
This commit therefore prints a symbolic name in addition to the integer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to fix relational operator called out by Dan Carpenter. ]
[ paulmck: More "const", as suggested by Josh Triplett. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, rcu_torture_writer_state is printed as an integer, which slows
debugging. This commit therefore prints a symbolic name in addition to
the integer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: More "const", as suggested by Josh Triplett. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit increases debug information in the case where the grace-period
kthread is being prevented from running by dumping that kthread's stack.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Split into prior commit and this commit, as suggested by
Josh Triplett. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, if the RCU grace-period kthread has not yet been created,
in which case the starvation-check code will print zero for the state,
which maps to TASK_RUNNING. This could clearly be quite confusing, so
this commit prints ~0, which does not map to any legal ->state value.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
We need the scheduler's fastpaths to be, well, fast, and unnecessarily
disabling and re-enabling interrupts is not necessarily consistent with
this goal. Especially given that there are regions of the scheduler that
already have interrupts disabled.
This commit therefore moves the call to rcu_note_context_switch()
to one of the interrupts-disabled regions of the scheduler, and
removes the now-redundant disabling and re-enabling of interrupts from
rcu_note_context_switch() and the functions it calls.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Shift rcu_note_context_switch() to avoid deadlock, as suggested
by Peter Zijlstra. ]
Currently, rcu_prepare_for_idle() checks for tick_nohz_active, even on
individual NOCBs CPUs, unless all CPUs are marked as NOCBs CPUs at build
time. This check is pointless on NOCBs CPUs because they never have any
callbacks posted, given that all of their callbacks are handed off to the
corresponding rcuo kthread. There is a check for individually designated
NOCBs CPUs, but it pointelessly follows the check for tick_nohz_active.
This commit therefore moves the check for individually designated NOCBs
CPUs up with the check for CONFIG_RCU_NOCB_CPU_ALL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This function no longer has #ifdefs, so this commit removes the
header comment calling them out.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Several releases have come and gone without the warning triggering,
so remove the lock-acquisition loop. Retain the WARN_ON_ONCE()
out of sheer paranoia.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit applies an early-exit approach to rcu_sched_qs(), reducing
the nesting level and saving a line of code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The Kconfig currently controlling compilation of this code is:
init/Kconfig:config TREE_RCU_TRACE
init/Kconfig: def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the file there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit. We could
consider moving this to an earlier initcall if desired.
We don't replace module.h with init.h since the file already has that.
We also delete the moduleparam.h include that is left over from
commit 64db4cfff9 (""Tree RCU": scalable
classic RCU implementation") since it is not needed here either.
We morph some tags like MODULE_AUTHOR into the comments at the top of
the file for documentation purposes.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the rcu_node_class[], rcu_fqs_class[], and rcu_exp_class[]
arrays needlessly pollute the global namespace within tree.c. This
commit therefore converts them to static local variables within
rcu_init_one().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Expedited grace periods can speed up boot, but are undesirable in
aggressive real-time systems. This commit therefore introduces a
kernel parameter rcupdate.rcu_normal_after_boot that disables
expedited grace periods just before init is spawned.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although expedited grace periods can be quite useful, and although their
OS jitter has been greatly reduced, they can still pose problems for
extreme real-time workloads. This commit therefore adds a rcu_normal
kernel boot parameter (which can also be manipulated via sysfs)
to suppress expedited grace periods, that is, to treat requests for
expedited grace periods as if they were requests for normal grace periods.
If both rcu_expedited and rcu_normal are specified, rcu_normal wins.
This means that if you are relying on expedited grace periods to speed up
boot, you will want to specify rcu_expedited on the kernel command line,
and then specify rcu_normal via sysfs once boot completes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds print statements that check the rcu_node structure to
find which ->expmask bits and which ->exp_tasks structures are blocking
the current expedited grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, if a grace period ends just as the stall-warning timeout
fires, an empty stall warning will be printed. This is not helpful,
so this commit avoids these useless warnings by rechecking completion
after awakening in synchronize_sched_expedited_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the piggybacked-work checks carried out by sync_exp_work_done()
atomically increment a small set of variables (the ->expedited_workdone0,
->expedited_workdone1, ->expedited_workdone2, ->expedited_workdone3
fields in the rcu_state structure), which will form a memory-contention
bottleneck given a sufficiently large number of CPUs concurrently invoking
either synchronize_rcu_expedited() or synchronize_sched_expedited().
This commit therefore moves these for fields to the per-CPU rcu_data
structure, eliminating the memory contention. The show_rcuexp() function
also changes to sum up each field in the rcu_data structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a couple lines of code and reduces indentation
by inverting the sense of an "if" statement in the function
sync_rcu_exp_select_cpus().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The memory barrier in rcu_seq_snap() is needed only for grace periods,
so this commit moves it to the grace-period-oriented wrapper
rcu_exp_gp_seq_snap().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Analogy with the ->qsmaskinitnext field might lead one to believe that
->expmaskinitnext tracks online CPUs. This belief is incorrect: Any CPU
that has ever been online will have its bit set in the ->expmaskinitnext
field. This commit therefore adds a comment to make this clear, at
least to people who read comments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If there is only one CPU, then invoking synchronize_sched_expedited()
is by definition a grace period. This commit checks for this condition
and does a short-circuit return in that case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rule is that all acquisitions of the rcu_node structure's ->lock
must provide transitivity: The lock is not acquired that frequently,
and sorting out exactly which required it and which did not would be
a maintenance nightmare. This commit therefore supplies the needed
transitivity to the remaining ->lock acquisitions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Providing RCU's memory-ordering guarantees requires that the rcu_node
tree's locking provide transitive memory ordering, which the Linux kernel's
spinlocks currently do not provide unless smp_mb__after_unlock_lock()
is used. Having a separate smp_mb__after_unlock_lock() after each and
every lock acquisition is error-prone, hard to read, and a bit annoying,
so this commit provides wrapper functions that pull in the
smp_mb__after_unlock_lock() invocations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Earlier versions of synchronize_sched_expedited() can prematurely end
grace periods due to the fact that a CPU marked as cpu_is_offline()
can still be using RCU read-side critical sections during the time that
CPU makes its last pass through the scheduler and into the idle loop
and during the time that a given CPU is in the process of coming online.
This commit therefore eliminates this window by adding additional
interaction with the CPU-hotplug operations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit redirects synchronize_rcu_expedited()'s wait to
synchronize_sched_expedited_wait(), thus enabling RCU CPU
stall warnings.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds task-print ability to the expedited RCU CPU stall
warning messages in preparation for adding stall warnings to
synchornize_rcu_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the RCU CPU stall warning message print online/offline
indications immediately after the CPU number. A "O" indicates global
offline, a "." global online, and a "o" indicates RCU believes that the
CPU is offline for the current grace period and "." otherwise, and an
"N" indicates that RCU believes that the CPU will be offline for the
next grace period, and "." otherwise, all right after the CPU number.
So for CPU 10, you would normally see "10-...:" indicating that everything
believes that the CPU is online.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that sync_sched_exp_select_cpus() and sync_rcu_exp_select_cpus()
are identical aside from the the argument to smp_call_function_single(),
this commit consolidates them with a functional argument.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit brings sync_sched_exp_select_cpus() into alignment with
sync_rcu_exp_select_cpus(), as a first step towards consolidating them
into one function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that synchronize_sched_expedited() uses IPIs, a hook in
rcu_sched_qs(), and the ->expmask field in the rcu_node combining
tree, it is no longer necessary to exclude CPU hotplug. Any
races with CPU hotplug will be detected when attempting to send
the IPI. This commit therefore removes the code excluding
CPU hotplug operations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This reverts commit af859beaab (rcu: Silence lockdep false positive
for expedited grace periods). Because synchronize_rcu_expedited()
no longer invokes synchronize_sched_expedited(), ->exp_funnel_mutex
acquisition is no longer nested, so the false positive no longer happens.
This commit therefore removes the extra lockdep data structures, as they
are no longer needed.
This commit switches synchronize_sched_expedited() from stop_one_cpu_nowait()
to smp_call_function_single(), thus moving from an IPI and a pair of
context switches to an IPI and a single pass through the scheduler.
Of course, if the scheduler actually does decide to switch to a different
task, there will still be a pair of context switches, but there would
likely have been a pair of context switches anyway, just a bit later.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The torturing_tasks() function is used only in kernels built with
CONFIG_PROVE_RCU=y, so the second definition can result in unused-function
compiler warnings. This commit adds __maybe_unused to suppress these
warnings.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcutorture module has a list of torture types, and specifying a
type not on this list is supposed to cleanly fail the module load.
Unfortunately, the "fail" happens without the "cleanly". This commit
therefore adds the needed clean-up after an incorrect torture_type.
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
1. Rename __rcu_sync_is_idle() to rcu_sync_lockdep_assert() and
change it to use rcu_lockdep_assert().
2. Change rcu_sync_is_idle() to return rsp->gp_state == GP_IDLE
unconditonally, this way we can remove the same check from
rcu_sync_lockdep_assert() and clearly isolate the debugging
code.
Note: rcu_sync_enter()->wait_event(gp_state == GP_PASSED) needs
another CONFIG_PROVE_RCU check, the same as is done in ->sync(); but
this needs some simple preparations in the core RCU code to avoid the
code duplication.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit allows rcu_sync structures to be safely deallocated,
The trick is to add a new ->wait field to the gp_ops array.
This field is a pointer to the rcu_barrier() function corresponding
to the flavor of RCU in question. This allows a new rcu_sync_dtor()
to wait for any outstanding callbacks before freeing the rcu_sync
structure.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit validates that the caller of rcu_sync_is_idle() holds the
corresponding type of RCU read-side lock, but only in kernels built
with CONFIG_PROVE_RCU=y. This validation is carried out via a new
rcu_sync_ops->held() method that is checked within rcu_sync_is_idle().
Note that although this does add code to the fast path, it only does so
in kernels built with CONFIG_PROVE_RCU=y.
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds the new struct rcu_sync_ops which holds sync/call
methods, and turns the function pointers in rcu_sync_struct into an array
of struct rcu_sync_ops. This simplifies the "init" helpers by collapsing
a switch statement and explicit multiple definitions into a simple
assignment and a helper macro, respectively.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_sync infrastructure can be thought of as infrastructure to be
used to implement reader-writer primitives having extremely lightweight
readers during times when there are no writers. The first use is in
the percpu_rwsem used by the VFS subsystem.
This infrastructure is functionally equivalent to
struct rcu_sync_struct {
atomic_t counter;
};
/* Check possibility of fast-path read-side operations. */
static inline bool rcu_sync_is_idle(struct rcu_sync_struct *rss)
{
return atomic_read(&rss->counter) == 0;
}
/* Tell readers to use slowpaths. */
static inline void rcu_sync_enter(struct rcu_sync_struct *rss)
{
atomic_inc(&rss->counter);
synchronize_sched();
}
/* Allow readers to once again use fastpaths. */
static inline void rcu_sync_exit(struct rcu_sync_struct *rss)
{
synchronize_sched();
atomic_dec(&rss->counter);
}
The main difference is that it records the state and only calls
synchronize_sched() if required. At least some of the calls to
synchronize_sched() will be optimized away when rcu_sync_enter() and
rcu_sync_exit() are invoked repeatedly in quick succession.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit moves cond_resched_rcu_qs() into stutter_wait(), saving
a line and also avoiding RCU CPU stall warnings from all torture
loops containing a stutter_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit corrects the comment for the values of the ->gp_state field,
which previously incorrectly said that these were for the ->gp_flags
field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit commit 4cdfc175c2 ("rcu: Move quiescent-state forcing
into kthread") started the process of folding the old ->fqs_state into
->gp_state, but did not complete it. This situation does not cause
any malfunction, but can result in extremely confusing trace output.
This commit completes this task of eliminating ->fqs_state in favor
of ->gp_state.
The old ->fqs_state was also used to decide when to collect dyntick-idle
snapshots. For this purpose, we add a boolean variable into the kthread,
which is set on the first call to rcu_gp_fqs() for a given grace period
and clear otherwise.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, __srcu_read_lock() cannot be invoked from restricted
environments because it contains calls to preempt_disable() and
preempt_enable(), both of which can invoke lockdep, which is a bad
idea in some restricted execution modes. This commit therefore moves
the preempt_disable() and preempt_enable() from __srcu_read_lock()
to srcu_read_lock(). It also inserts the preempt_disable() and
preempt_enable() around the call to __srcu_read_lock() in do_exit().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the RCU CPU stall warning message print online/offline
indications immediately after a hyphen following the CPU number. A "O"
indicates that the global CPU-hotplug system believes that the CPU is
online, a "o" that RCU perceived the CPU to be online at the beginning
of the current expedited grace period, and an "N" that RCU currently
believes that it will perceive the CPU as being online at the beginning
of the next expedited grace period, with "." otherwise for all three
indications. So for CPU 10, you would normally see "10-OoN:" indicating
that everything believes that the CPU is online.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit loosens rcutree.rcu_fanout_leaf range checks
and replaces a panic() with a fallback to compile-time values.
This fallback is accompanied by a WARN_ON(), and both occur when the
rcutree.rcu_fanout_leaf value is too small to accommodate the number of
CPUs. For example, given the current four-level limit for the rcu_node
tree, a system with more than 16 CPUs built with CONFIG_FANOUT=2 must
have rcutree.rcu_fanout_leaf larger than 2.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Because preempt_disable() maps to barrier() for non-debug builds,
it forces the compiler to spill and reload registers. Because Tree
RCU and Tiny RCU now only appear in CONFIG_PREEMPT=n builds, these
barrier() instances generate needless extra code for each instance of
rcu_read_lock() and rcu_read_unlock(). This extra code slows down Tree
RCU and bloats Tiny RCU.
This commit therefore removes the preempt_disable() and preempt_enable()
from the non-preemptible implementations of __rcu_read_lock() and
__rcu_read_unlock(), respectively. However, for debug purposes,
preempt_disable() and preempt_enable() are still invoked if
CONFIG_PREEMPT_COUNT=y, because this allows detection of sleeping inside
atomic sections in non-preemptible kernels.
However, Tiny and Tree RCU operates by coalescing all RCU read-side
critical sections on a given CPU that lie between successive quiescent
states. It is therefore necessary to compensate for removing barriers
from __rcu_read_lock() and __rcu_read_unlock() by adding them to a
couple of the RCU functions invoked during quiescent states, namely to
rcu_all_qs() and rcu_note_context_switch(). However, note that the latter
is more paranoia than necessity, at least until link-time optimizations
become more aggressive.
This is based on an earlier patch by Paul E. McKenney, fixing
a bug encountered in kernels built with CONFIG_PREEMPT=n and
CONFIG_PREEMPT_COUNT=y.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
We have had the call_rcu_func_t typedef for a quite awhile, but we still
use explicit function pointer types in some places. These types can
confuse cscope and can be hard to read. This patch therefore replaces
these types with the call_rcu_func_t typedef.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
As we now have rcu_callback_t typedefs as the type of rcu callbacks, we
should use it in call_rcu*() and friends as the type of parameters. This
could save us a few lines of code and make it clear which function
requires an rcu callbacks rather than other callbacks as its argument.
Besides, this can also help cscope to generate a better database for
code reading.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit converts the rcu_data structure's ->cpu_no_qs field
to a union. The bytewise side of this union allows individual access
to indications as to whether this CPU needs to find a quiescent state
for a normal (.norm) and/or expedited (.exp) grace period. The setwise
side of the union allows testing whether or not a quiescent state is
needed at all, for either type of grace period.
For now, only .norm is used. A later commit will introduce the expedited
usage.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit inverts the sense of the rcu_data structure's ->passed_quiesce
field and renames it to ->cpu_no_qs. This will allow a later commit to
use an "aggregate OR" operation to test expedited as well as normal grace
periods without added overhead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
An upcoming commit needs to invert the sense of the ->passed_quiesce
rcu_data structure field, so this commit is taking this opportunity
to clarify things a bit by renaming ->qs_pending to ->core_needs_qs.
So if !rdp->core_needs_qs, then this CPU need not concern itself with
quiescent states, in particular, it need not acquire its leaf rcu_node
structure's ->lock to check. Otherwise, it needs to report the next
quiescent state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, synchronize_sched_expedited() uses a single global counter
to track the number of remaining context switches that the current
expedited grace period must wait on. This is problematic on large
systems, where the resulting memory contention can be pathological.
This commit therefore makes synchronize_sched_expedited() instead use
the combining tree in the same manner as synchronize_rcu_expedited(),
keeping memory contention down to a dull roar.
This commit creates a temporary function sync_sched_exp_select_cpus()
that is very similar to sync_rcu_exp_select_cpus(). A later commit
will consolidate these two functions, which becomes possible when
synchronize_sched_expedited() switches from stop_one_cpu_nowait() to
smp_call_function_single().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current preemptible-RCU expedited grace-period algorithm invokes
synchronize_sched_expedited() to enqueue all tasks currently running
in a preemptible-RCU read-side critical section, then waits for all the
->blkd_tasks lists to drain. This works, but results in both an IPI and
a double context switch even on CPUs that do not happen to be running
in a preemptible RCU read-side critical section.
This commit implements a new algorithm that causes less OS jitter.
This new algorithm IPIs all online CPUs that are not idle (from an
RCU perspective), but refrains from self-IPIs. If a CPU receiving
this IPI is not in a preemptible RCU read-side critical section (or
is just now exiting one), it pushes quiescence up the rcu_node tree,
otherwise, it sets a flag that will be handled by the upcoming outermost
rcu_read_unlock(), which will then push quiescence up the tree.
The expedited grace period must of course wait on any pre-existing blocked
readers, and newly blocked readers must be queued carefully based on
the state of both the normal and the expedited grace periods. This
new queueing approach also avoids the need to update boost state,
courtesy of the fact that blocked tasks are no longer ever migrated to
the root rcu_node structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit replaces sync_rcu_preempt_exp_init1(() and
sync_rcu_preempt_exp_init2() with sync_exp_reset_tree_hotplug()
and sync_exp_reset_tree(), which will also be used by
synchronize_sched_expedited(), and sync_rcu_exp_select_nodes(), which
contains code specific to synchronize_rcu_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This is a nearly pure code-movement commit, moving rcu_report_exp_rnp(),
sync_rcu_preempt_exp_done(), and rcu_preempted_readers_exp() so
that later commits can make synchronize_sched_expedited() use them.
The non-code-movement portion of this commit tags rcu_report_exp_rnp()
as __maybe_unused to avoid build errors when CONFIG_PREEMPT=n.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is an ->expedited_wq waitqueue in each rcu_state structure,
there is no need for the sync_rcu_preempt_exp_wq global variable. This
commit therefore substitutes ->expedited_wq for sync_rcu_preempt_exp_wq.
It also initializes ->expedited_wq only once at boot instead of at the
start of each expedited grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In kernels built with CONFIG_PREEMPT=y, synchronize_rcu_expedited()
invokes synchronize_sched_expedited() while holding RCU-preempt's
root rcu_node structure's ->exp_funnel_mutex, which is acquired after
the rcu_data structure's ->exp_funnel_mutex. The first thing that
synchronize_sched_expedited() will do is acquire RCU-sched's rcu_data
structure's ->exp_funnel_mutex. There is no danger of an actual deadlock
because the locking order is always from RCU-preempt's expedited mutexes
to those of RCU-sched. Unfortunately, lockdep considers both rcu_data
structures' ->exp_funnel_mutex to be in the same lock class and therefore
reports a deadlock cycle.
This commit silences this false positive by placing RCU-sched's rcu_data
structures' ->exp_funnel_mutex locks into their own lock class.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU is the only thing that uses smp_mb__after_unlock_lock(), and is
likely the only thing that ever will use it, so this commit makes this
macro private to RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
In a CONFIG_PREEMPT=y kernel, synchronize_rcu_expedited()
acquires the ->exp_funnel_mutex in rcu_preempt_state, then invokes
synchronize_sched_expedited, which acquires the ->exp_funnel_mutex in
rcu_sched_state. There can be no deadlock because rcu_preempt_state
->exp_funnel_mutex acquisition always precedes that of rcu_sched_state.
But lockdep does not know that, so it gives false-positive splats.
This commit therefore associates a separate lock_class_key structure
with the rcu_sched_state structure's ->exp_funnel_mutex, allowing
lockdep to see the lock ordering, avoiding the false positives.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's rcu_oom_notify() disables CPU hotplug in order to stabilize the
list of online CPUs, which it traverses. However, this is completely
pointless because smp_call_function_single() will quietly fail if invoked
on an offline CPU. Because the count of requests is incremented in the
rcu_oom_notify_cpu() function that is remotely invoked, everything works
nicely even in the face of concurrent CPU-hotplug operations.
Furthermore, in recent kernels, invoking get_online_cpus() from an OOM
notifier can result in deadlock. This commit therefore removes the
call to get_online_cpus() and put_online_cpus() from rcu_oom_notify().
Reported-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
The RCU_LOCKDEP_WARN() in synchronize_rcu_tasks() triggers if the
scheduler is active, which is backwards. This commit therefore
negates the test.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros. This also requires
inverting the sense of the conditional, which this commit also does.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Although rcu_is_watching() is marked notrace, it invokes preempt_disable()
and preempt_enable(), both of which can be traced. This defeats the
purpose of the notrace on rcu_is_watching(), so this commit substitutes
preempt_disable_notrace() and preempt_enable_notrace().
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
There have been several requests for a primitive that waits for
grace periods for several RCU flavors concurrently, so this
commit creates it. This is a variadic macro, and you pass in
the call_rcu() functions of the flavors of RCU that you wish to
wait for.
Note that you cannot pass in call_srcu() for two reasons: (1) This
would result in a type mismatch and (2) You need to specify which
srcu_struct you want to use. Handle this by creating a wrapper
function for your SRCU domain, for example:
void call_srcu_mine(struct rcu_head *head, rcu_callback_t func)
{
call_srcu(&ss_mine, head, func);
}
You can then do something like this:
synchronize_rcu_mult(call_srcu_mine, call_rcu, call_rcu_sched);
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tasks are no longer migrated to the root rcu_node, so there is no
longer any need for a boost kthread for the root rcu_node, and there no
longer is such a kthread. This commit therefore fixes the comment in
rcu_boost_kthread()'s header to reflect this new reality.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The get_state_synchronize_rcu() and cond_synchronize_rcu() functions
allow polling for grace-period completion, with an actual wait for a
grace period occurring only when cond_synchronize_rcu() is called too
soon after the corresponding get_state_synchronize_rcu(). However,
these functions work only for vanilla RCU. This commit adds the
get_state_synchronize_sched() and cond_synchronize_sched(), which provide
the same capability for RCU-sched.
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the common case, there will be only one expedited grace period in
the system at a given time, in which case it is not helpful to use
funnel locking. This commit therefore adds a fastpath that bypasses
funnel locking when the root ->exp_funnel_mutex is not held.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The grace-period kthread sleeps waiting to do a force-quiescent-state
scan, and when awakened sets rsp->gp_state to RCU_GP_DONE_FQS.
However, this is confusing because the kthread has not done the
force-quiescent-state, but is instead just starting to do it. This commit
therefore renames RCU_GP_DONE_FQS to RCU_GP_DOING_FQS in order to make
things a bit easier on reviewers.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The condition for the wait_event_interruptible_timeout() that waits
to do the next force-quiescent-state scan is a bit ornate:
((gf = READ_ONCE(rsp->gp_flags)) &
RCU_GP_FLAG_FQS) ||
(!READ_ONCE(rnp->qsmask) &&
!rcu_preempt_blocked_readers_cgp(rnp))
This commit therefore pulls this condition out into a helper function
and comments its component conditions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although synchronize_sched_expedited() historically has no RCU CPU stall
warnings, the availability of the rcupdate.rcu_expedited boot parameter
invalidates the old assumption that synchronize_sched()'s stall warnings
would suffice. This commit therefore adds RCU CPU stall warnings to
synchronize_sched_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The strictly rcu_node based funnel-locking scheme works well in many
cases, but systems with CONFIG_RCU_FANOUT_LEAF=64 won't necessarily get
all that much concurrency. This commit therefore extends the funnel
locking into the per-CPU rcu_data structure, providing concurrency equal
to the number of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One of the requirements on RCU grace periods is that if there is a
causal chain of operations that starts after one grace period and
ends before another grace period, then the two grace periods must
be serialized. There has been (and might still be) code that relies
on this, for example, certain types of reference-counting code that
does a call_rcu() within an RCU callback function.
This requirement is why there is an smp_mb() at the end of both
synchronize_sched_expedited() and synchronize_rcu_expedited().
However, this is the only smp_mb() in these functions, so it would
be nicer to consolidate it into rcu_exp_gp_seq_end(). This commit
does just that.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_seq operations were open-coded in _rcu_barrier(), so this commit
replaces the open-coding with the shiny new rcu_seq operations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit gets rid of synchronize_rcu_expedited()'s mutex_trylock()
polling loop in favor of the funnel-locking scheme that was abstracted
from synchronize_sched_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The type of "s" has been "long" rather than the correct "unsigned long"
for quite some time. This commit fixes this type error.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit abstracts funnel locking from synchronize_sched_expedited()
so that it may be used by synchronize_rcu_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although synchronize_rcu_expedited() uses a sequence-counter scheme, it
is based on a single increment per grace period, which means that tasks
piggybacking off of concurrent grace periods may be forced to wait longer
than necessary. This commit therefore applies the new sequence-count
functions developed for synchronize_sched_expedited() to speed things
up a bit and to consolidate the sequence-counter implementation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit creates rcu_exp_gp_seq_start() and rcu_exp_gp_seq_end() to
bracket an expedited grace period, rcu_exp_gp_seq_snap() to snapshot the
sequence counter, and rcu_exp_gp_seq_done() to check to see if a full
expedited grace period has elapsed since the snapshot. These will be
applied to synchronize_rcu_expedited(). These are defined in terms of
underlying rcu_seq_start(), rcu_seq_end(), rcu_seq_snap(), rcu_seq_done(),
which will be applied to _rcu_barrier().
One reason that this commit doesn't use the seqcount primitives themselves
is that the smp_wmb() in those primitive is insufficient due to the fact
that expedited grace periods do reads as well as writes. In addition,
the read-side seqcount primitives detect a potentially partial change,
where the expedited primitives instead need a guaranteed full change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Sequentially stopping the CPUs slows down expedited grace periods by
at least a factor of two, based on rcutorture's grace-period-per-second
rate. This is a conservative measure because rcutorture uses unusually
long RCU read-side critical sections and because rcutorture periodically
quiesces the system in order to test RCU's ability to ramp down to and
up from the idle state. This commit therefore replaces the stop_one_cpu()
with stop_one_cpu_nowait(), using an atomic-counter scheme to determine
when all CPUs have passed through the stopped state.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit gets rid of synchronize_sched_expedited()'s mutex_trylock()
polling loop in favor of a funnel-locking scheme based on the rcu_node
tree. The work-done check is done at each level of the tree, allowing
high-contention situations to be resolved quickly with reasonable levels
of mutex contention.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that synchronize_sched_expedited() have a mutex, it can use simpler
work-already-done detection scheme. This commit simplifies this scheme
by using something similar to the sequence-locking counter scheme.
A counter is incremented before and after each grace period, so that
the counter is odd in the midst of the grace period and even otherwise.
So if the counter has advanced to the second even number that is
greater than or equal to the snapshot, the required grace period has
already happened.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The synchronize_sched_expedited() currently invokes try_stop_cpus(),
which schedules the stopper kthreads on each online non-idle CPU,
and waits until all those kthreads are running before letting any
of them stop. This is disastrous for real-time workloads, which
get hit with a preemption that is as long as the longest scheduling
latency on any CPU, including any non-realtime housekeeping CPUs.
This commit therefore switches to using stop_one_cpu() on each CPU
in turn. This avoids inflicting the worst-case scheduling latency
on the worst-case CPU onto all other CPUs, and also simplifies the
code a little bit.
Follow-up commits will simplify the counter-snapshotting algorithm
and convert a number of the counters that are now protected by the
new ->expedited_mutex to non-atomic.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ paulmck: Kept stop_one_cpu(), dropped disabling of "guardrails". ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_CPU_STALL_INFO has been default-y for a couple of
releases with no complaints, so it is time to eliminate this Kconfig
option entirely, so that the long-form RCU CPU stall warnings cannot
be disabled. This commit does just that.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The fact that tasks could be migrated from leaf to root rcu_node
structures meant that synchronize_rcu_expedited() had to disable
CPU hotplug. However, tasks now stay put, so this commit removes the
CPU-hotplug disabling from synchronize_rcu_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently if the rcu_fanout_leaf boot parameter is out of bounds (that
is, less than RCU_FANOUT_LEAF or greater than the number of bits in an
unsigned long), a warning is issued and execution continues with the
out-of-bounds value. This can result in all manner of failures, so this
patch resets rcu_fanout_leaf to RCU_FANOUT_LEAF when an out-of-bounds
condition is detected.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because gcc does not realize a loop would not be entered ever
(i.e. in case of rcu_num_lvls == 1):
for (i = 1; i < rcu_num_lvls; i++)
rsp->level[i] = rsp->level[i - 1] + levelcnt[i - 1];
some compiler (pre- 5.x?) versions give a bogus warning:
kernel/rcu/tree.c: In function ‘rcu_init_one.isra.55’:
kernel/rcu/tree.c:4108:13: warning: array subscript is above array bounds [-Warray-bounds]
rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1];
^
Fix that warning by adding an extra item to rcu_state::level[]
array. Once the bogus warning is fixed in gcc and kernel drops
support of older versions, the dummy item may be removed from
the array.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although RCU-tasks isn't really designed to support rcu_dereference()
and list manipulation, that is how rcutorture tests it. Which means
that lockdep-RCU complains about the rcu_dereference_check() invocations
because RCU-tasks doesn't have read-side markers. This commit therefore
creates a torturing_tasks() to silence the lockdep-RCU complaints from
rcu_dereference_check() when RCU-tasks is being tortured.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_torture_cbflood() function correctly checks for flavors of
RCU that lack analogs to call_rcu() and rcu_barrier(), but in that
case it fails to terminate correctly. In fact, it terminates so
incorrectly that segfaults can result. This commit therefore causes
rcu_torture_cbflood() to do the proper wait-for-stop procedure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Specifying a negative rcutorture.shuffle_interval value will cause a
negative value to be used as a sleep time. This commit therefore
refuses to start shuffling unless the rcutorture.shuffle_interval
value is greater than zero.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, a negative value for rcutorture.nfakewriters= can cause
rcutorture to pass a negative size to the memory allocator, which
is not really a particularly good thing to do. This commit therefore
adds bounds checking to this parameter, so that values that are less
than or equal to zero disable fake writing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A negative value for rcutorture.n_barrier_cbs can pass a negative value
to the memory allocator, so this commit instead causes rcu_barrier()
testing to be disabled in this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This update makes arithmetic to calculate number of RCU nodes
more straight and easy to read.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although a number of RCU levels may be less than the current
maximum of four, some static data associated with each level
are allocated for all four levels. As result, the extra data
never get accessed and just wast memory. This update limits
count of allocated items to the number of used RCU levels.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Members rcu_state::levelcnt[] and rcu_state::levelspread[]
are only used at init. There is no reason to keep them
afterwards.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Number of items in rcu_capacity[] array is defined by macro
MAX_RCU_LVLS. However, that array is never accessed beyond
RCU_NUM_LVLS index. Therefore, we can limit the array to
RCU_NUM_LVLS items and eliminate MAX_RCU_LVLS. As result,
in most cases the memory is conserved.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Variable rcu_num_lvls is limited by RCU_NUM_LVLS macro.
In turn, rcu_state::levelcnt[] array is never accessed
beyond rcu_num_lvls. Thus, rcu_state::levelcnt[] is safe
to limit to RCU_NUM_LVLS items.
Since rcu_num_lvls could be changed during boot (as result
of rcutree.rcu_fanout_leaf kernel parameter update) one might
assume a new value could overflow the value of RCU_NUM_LVLS.
However, that is not the case, since leaf-level fanout is only
permitted to increase, resulting in rcu_num_lvls possibly to
decrease.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Current code suggests that introducing the extra level to
rcu_capacity[] array makes some of the arithmetic easier.
Well, in fact it appears rather confusing and unnecessary.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This update simplifies rcu_init_geometry() code flow
and makes calculation of the total number of rcu_node
structures more easy to read.
The update relies on the fact num_rcu_lvl[] is never
accessed beyond rcu_num_lvls index by the rest of the
code. Therefore, there is no need initialize the whole
num_rcu_lvl[].
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Local variable 'n' mimics 'nr_cpu_ids' while the both are
used within one function. There is no reason for 'n' to
exist whatsoever.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently a condition when RCU tree is unable to accommodate
the configured number of CPUs is not permitted and causes
a fall back to compile-time values. However, the code has no
means to exceed the RCU tree capacity neither at compile-time
nor in run-time. Therefore, if the condition is met in run-
time then it indicates a serios problem elsewhere and should
be handled with a panic.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Type-checking coccinelle spatches are being used to locate type mismatches
between function signatures and return values in this case this produced:
./kernel/rcu/srcu.c:271 WARNING: return of wrong type
int != unsigned long,
srcu_readers_active() returns an int that is the sum of per_cpu unsigned
long but the only user is cleanup_srcu_struct() which is using it as a
boolean (condition) to see if there is any readers rather than actually
using the approximate number of readers. The theoretically possible
unsigned long overflow case does not need to be handled explicitly - if
we had 4G++ readers then something else went wrong a long time ago.
proposal: change the return type to boolean. The function name is left
unchanged as it fits the naming expectation for a boolean.
patch was compile tested for x86_64_defconfig (implies CONFIG_SRCU=y)
patch is against 4.1-rc5 (localversion-next is -next-20150525)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
DEBUG_LOCK_ALLOC=y is not a production setting, but it is
not very unusual either. Many developers routinely
use kernels built with it enabled.
Apart from being selected by hand, it is also auto-selected by
PROVE_LOCKING "Lock debugging: prove locking correctness" and
LOCK_STAT "Lock usage statistics" config options.
LOCK STAT is necessary for "perf lock" to work.
I wouldn't spend too much time optimizing it, but this particular
function has a very large cost in code size: when it is deinlined,
code size decreases by 830,000 bytes:
text data bss dec hex filename
85674192 22294776 20627456 128596424 7aa39c8 vmlinux.before
84837612 22294424 20627456 127759492 79d7484 vmlinux
(with this config: http://busybox.net/~vda/kernel_config)
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU_USER_QS Kconfig parameter is now just a synonym for NO_HZ_FULL,
so this commit eliminates RCU_USER_QS, replacing all uses with NO_HZ_FULL.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
"monitonic raw". Also some enhancements to make the ring buffer even
faster. But the biggest and most noticeable change is the renaming of
the ftrace* files, structures and variables that have to deal with
trace events.
Over the years I've had several developers tell me about their confusion
with what ftrace is compared to events. Technically, "ftrace" is the
infrastructure to do the function hooks, which include tracing and also
helps with live kernel patching. But the trace events are a separate
entity altogether, and the files that affect the trace events should
not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled()-> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not heard
a single complaint about this rename breaking anything. Mostly because
these functions, variables and structures are mostly internal to the
tracing system and are seldom (if ever) used by anything external to that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
=hkdz
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This patch series contains several clean ups and even a new trace
clock "monitonic raw". Also some enhancements to make the ring buffer
even faster. But the biggest and most noticeable change is the
renaming of the ftrace* files, structures and variables that have to
deal with trace events.
Over the years I've had several developers tell me about their
confusion with what ftrace is compared to events. Technically,
"ftrace" is the infrastructure to do the function hooks, which include
tracing and also helps with live kernel patching. But the trace
events are a separate entity altogether, and the files that affect the
trace events should not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not
heard a single complaint about this rename breaking anything. Mostly
because these functions, variables and structures are mostly internal
to the tracing system and are seldom (if ever) used by anything
external to that"
* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
ring_buffer: Allow to exit the ring buffer benchmark immediately
ring-buffer-benchmark: Fix the wrong type
ring-buffer-benchmark: Fix the wrong param in module_param
ring-buffer: Add enum names for the context levels
ring-buffer: Remove useless unused tracing_off_permanent()
ring-buffer: Give NMIs a chance to lock the reader_lock
ring-buffer: Add trace_recursive checks to ring_buffer_write()
ring-buffer: Allways do the trace_recursive checks
ring-buffer: Move recursive check to per_cpu descriptor
ring-buffer: Add unlikelys to make fast path the default
tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
tracing: Rename ftrace_event_name() to trace_event_name()
tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
...
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Eric reported that the timer_migration sysctl is not really nice
performance wise as it needs to check at every timer insertion whether
the feature is enabled or not. Further the check does not live in the
timer code, so we have an extra function call which checks an extra
cache line to figure out that it is disabled.
We can do better and store that information in the per cpu (hr)timer
bases. I pondered to use a static key, but that's a nightmare to
update from the nohz code and the timer base cache line is hot anyway
when we select a timer base.
The old logic enabled the timer migration unconditionally if
CONFIG_NO_HZ was set even if nohz was disabled on the kernel command
line.
With this modification, we start off with migration disabled. The user
visible sysctl is still set to enabled. If the kernel switches to NOHZ
migration is enabled, if the user did not disable it via the sysctl
prior to the switch. If nohz=off is on the kernel command line,
migration stays disabled no matter what.
Before:
47.76% hog [.] main
14.84% [kernel] [k] _raw_spin_lock_irqsave
9.55% [kernel] [k] _raw_spin_unlock_irqrestore
6.71% [kernel] [k] mod_timer
6.24% [kernel] [k] lock_timer_base.isra.38
3.76% [kernel] [k] detach_if_pending
3.71% [kernel] [k] del_timer
2.50% [kernel] [k] internal_add_timer
1.51% [kernel] [k] get_nohz_timer_target
1.28% [kernel] [k] __internal_add_timer
0.78% [kernel] [k] timerfn
0.48% [kernel] [k] wake_up_nohz_cpu
After:
48.10% hog [.] main
15.25% [kernel] [k] _raw_spin_lock_irqsave
9.76% [kernel] [k] _raw_spin_unlock_irqrestore
6.50% [kernel] [k] mod_timer
6.44% [kernel] [k] lock_timer_base.isra.38
3.87% [kernel] [k] detach_if_pending
3.80% [kernel] [k] del_timer
2.67% [kernel] [k] internal_add_timer
1.33% [kernel] [k] __internal_add_timer
0.73% [kernel] [k] timerfn
0.54% [kernel] [k] wake_up_nohz_cpu
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables. However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct(). Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables. This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers(). This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud. Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcutorture.c file uses several explicit memory barriers that can
easily be converted to smp_store_release() and smp_load_acquire(), which
improves maintainability and also improves performance a bit.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
By default, with rcutorture.nreaders equal to -1, rcutorture provisions
N-1 reader kthreads, where N is the number of CPUs. This avoids
rcutorture-induced stalls, but also avoids heavier levels of torture.
This commit therefore allows negative values of rcutorture.nreaders
to specify larger numbers of reader kthreads, so that for example
rcutorture.nreaders=-2 provisions N kthreads and rcutorture.nreaders=-5
provisions N+3 kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Update documentation, as suggested by Josh Triplett. ]
If, at the time __rcu_process_callbacks() is invoked, there are callbacks
in Tiny RCU's callback list, but none of them are ready to be invoked,
the current list-management code will knit the non-ready callbacks out
of the list. This can result in hangs and possibly worse. This commit
therefore inserts a check for there being no callbacks that can be
invoked immediately.
This bug is unlikely to occur -- you have to get a new callback between
the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to
__rcu_process_callbacks(). It was detected by the addition of RCU-bh
testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's
mutation testing. Although this bug was made much more likely by
915e8a4fe4 (rcu: Remove fastpath from __rcu_process_callbacks()), this
did not cause the bug, but rather made it much more probable. That
said, it takes more than 40 hours of rcutorture testing, on average,
for this bug to appear, so this fix cannot be considered an emergency.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The Tiny RCU counterparts to rcu_idle_enter(), rcu_idle_exit(),
rcu_irq_enter(), and rcu_irq_exit() are empty functions, but each has
EXPORT_SYMBOL_GPL(), which needlessly consumes extra memory, especially
in kernels built with module support. This commit therefore moves these
functions to static inlines in rcutiny.h, removing the need for exports.
This won't affect the size of the tiniest kernels, which are likely
built without module support, but might help semi-tiny kernels that
might include module support.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies some warning-omission micro-optimizations to RCU's
various extended-quiescent-state functions, which are on the kernel/user
hotpath for CONFIG_NO_HZ_FULL=y.
Reported-by: Rik van Riel <riel@redhat.com>
Reported by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the initialization of the kthread_prio boot parameter
so that RCU will build even when CONFIG_RCU_KTHREAD_PRIO is undefined.
The kthread_prio boot parameter is set to CONFIG_RCU_KTHREAD_PRIO if
that is defined, otherwise to 1 if CONFIG_RCU_BOOST is defined and
to zero otherwise. This commit then makes CONFIG_RCU_KTHREAD_PRIO
depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_KTHREAD_PRIO unless they want to be.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so
that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined.
The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF
when defined, otherwise it is set to 32 for 32-bit systems and 64 for
64-bit systems. This commit then makes CONFIG_RCU_FANOUT_LEAF depend
on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_FANOUT_LEAF unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit introduces an RCU_FANOUT C-preprocessor macro so that RCU will
build even when CONFIG_RCU_FANOUT is undefined. The RCU_FANOUT macro is
set to the value of CONFIG_RCU_FANOUT when defined, otherwise it is set
to 32 for 32-bit systems and 64 for 64-bit systems. This commit then
makes CONFIG_RCU_FANOUT depend on CONFIG_RCU_EXPERT, so that Kconfig
users won't be asked about CONFIG_RCU_FANOUT unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The purpose of this commit is to make it easier to verify that RCU's
combining tree is set up correctly, which is useful to have when making
changes in how that tree is initialized.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[ paulmck: Fold fix found by Fengguang's 0-day test robot. ]
The CONFIG_RCU_FANOUT_EXACT Kconfig parameter is used primarily (and
perhaps only) by rcutorture to verify that RCU works correctly in specific
rcu_node combining-tree configurations. It therefore does not make
much sense have this as a question to people attempting to configure
their kernels. So this commit creates an rcutree.rcu_fanout_exact=
boot parameter that rcutorture can use, and eliminates the original
CONFIG_RCU_FANOUT_EXACT Kconfig parameter.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them. This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability. A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies. Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because gcc doesn't realize that rcu_num_lvls must be strictly greater
than zero, some versions give a spurious warning about levelcnt[0] being
uninitialized in rcu_init_one(). This commit updates the condition on
the pre-existing panic() in order to educate gcc on this point.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the larger the gp_init_delay boot parameter, the slower
rcutorture will sequence through grace periods. This commit avoids this
issue by decreasing the probability of slowing initialization of a given
grace period as the degree of slowness increases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_data structure's ->rcu_qs_ctr_snap field is initialized at
CPU-online time from the current CPU's element of the per-CPU rcu_qs_ctr
variable. Unfortunately, this is at CPU_UP_PREPARE time, so has nothing
to do with the CPU being onlined. This commit therefore initializes
this variable from the incoming CPU's element of rcu_qs_ctr.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because offline CPUs are propagated up the rcu_node tree's ->qsmaskinit
bits just before each grace period starts, the ->qsmaskinit bit cannot
be clear when the corresponding ->qsmask bit is set. Furthermore, this
condition used to correspond to a CPU that was on its way offline, and
making RCU's notion of an offline CPU more precise has eliminated this
situation. This commit therefore removes the now-redundant offline
check from force_qs_rnp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because force_qs_rnp() is invoked only from the force-quiescent-state
code which runs only in the context of the grace-period kthread, a grace
period must always be in progress throughout force_qs_rnp()'s execution.
This commit therefore removes the rcu_gp_in_progress() check and the
associated dead code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tasks are no longer migrated away from a given rcu_node structure
when all CPUs corresponding to that rcu_node structure have gone offline.
This means that rcu_read_unlock_special() no longer needs to loop
retrying rcu_node ->lock acquisition because the current task is
guaranteed to stay put.
This commit takes a small and paranoid step towards relying on this
guarantee by placing a WARN_ON_ONCE() just after the early exit from
the lock-acquisition loop.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes a HOTPLUG_CPU #ifdef, replacing it with
IS_ENABLED()-protected return statements. This relies on the
optimizer to remove any resulting dead code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_cpu_has_callbacks() is declared int. The current declaration was introduced
in commit c0f4dfd4f9 (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks). But it is actually returning bool and as the function description
states " * Return true if the specified CPU has any callback....", this probably
should be a bool as all (3) call-sites currently treat it as bool.
Type-checking coccinelle spatches are being used to locate type mismatches
between function signatures and return values in this case this produced:
./kernel/rcu/tree.c:3538 WARNING: return of wrong type
int != bool,
Patch was compile tested with x86_64_defconfig (implies CONFIG_TREE_RCU=y)
Patch is against 4.1-rc3 (localversion-next is -next-20150511) and fixes
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_bh_data, rcu_sched_data and rcu_preempt_data are never used outside
kernel/rcu/tree.c and thus can be made static.
Doing so fixes a section mismatch warning reported by clang when
building LLVMLinux with -Wsection, because these variables were declared
in .data..percpu and defined in .data..percpu..shared_aligned since
commit 11bbb235c2 ("rcu: Use DEFINE_PER_CPU_SHARED_ALIGNED for
rcu_data").
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, synchronize_sched_expedited() will call synchronize_sched()
if there is danger of counter wrap. But if configuration says to
always do expedited grace periods, synchronize_sched() will just
call synchronize_sched_expedited() right back again. In theory,
the old expedited operations will complete, the counters will
get back in synch, and the recursion will end. But we could
easily run out of stack long before that time. This commit
therefore makes synchronize_sched_expedited() invoke the underlying
wait_rcu_gp(call_rcu_sched) instead of synchronize_sched(), the same as
all the other calls out from synchronize_sched_expedited().
This bug was introduced by commit 1924bcb025 (Avoid counter wrap in
synchronize_sched_expedited()).
Reported-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds grace number and command-flags information to the
"kthread starved" message that is sometimes printed out as part of
RCU CPU stall warnings. This message is caused by the corresponding
RCU grace-period kthread not having run for at least two seconds, and
this added information can be helpful when debugging.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The first item list_for_each_entry_continue(alist) iterates over is
alist->next, rather than alist itself. Consequently,
rcu_print_detail_task_stall_rnp() skips the task referenced by gp_tasks.
Use gp_tasks->prev as the argument to list_for_each_entry_continue()
instead.
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Use the normal return values for bool functions
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_kthread_wake() refuses to do a wakeup unless at least
one of the ->gp_flags bits are set, which normally will not be the
case when the last quiescent state is reported. This results in
up to a 3-jiffy delay given default Kconfig settings. This commit
therefore has rcu_report_qs_rsp() set RCU_GP_FLAG_FQS before invoking
rcu_gp_kthread_wake() in order to force a more immediate wakeup at
grace-period end, thus reducing grace-period latencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit converts several CONFIG_RCU_NOCB_CPU_ALL #ifdefs to
instead use IS_ENABLED(). This change should help avoid hiding
code from compiler diagnostics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit creates an immutable rcu_data_p pointer that references
rcu_preempt_data for TREE_PREEMPT_RCU builds and that references
rcu_sched_data for TREE_RCU builds. This rcu_data_p pointer will enable
more code to move from #ifdef to IS_ENABLED().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a "const" tag to the declarations of rcu_state_p,
which should allow the compiler to generate better code and also to
catch erroneous assignments to this variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes a few RCU_BOOST #ifdefs, replacing them with
IS_ENABLED()-protected return statements. This relies on the
optimizer to remove any resulting dead code. There are several other
RCU_BOOST #ifdefs, however these rely on some per-CPU variables that
are available only under RCU_BOOST. These might be converted later,
if the simplification proves to outweigh the increase in memory footprint.
One hoped-for advantage is more easily locating compiler errors in
obscure combinations of Kconfig parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-rt-users@vger.kernel.org>
It would be good to move more code from #ifdef to IS_ENABLED(), but
that does not work if the body of the IS_ENABLED() "if" statement
references a variable (such as rcu_preempt_state) that does not
exist if the IS_ENABLED() Kconfig variable is not set. This commit
therefore substitutes *rcu_state_p for all uses of rcu_preempt_state
in kernel/rcu/tree_preempt.h, which should enable elimination of
a few #ifdefs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves from the old ACCESS_ONCE() API to the new READ_ONCE()
and WRITE_ONCE() APIs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to include kernel/torture.c as suggested by Jason Low. ]
The term "ftrace" is really the infrastructure of the function hooks,
and not the trace events. Rename ftrace_event.h to trace_events.h to
represent the trace_event infrastructure and decouple the term ftrace
from it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The evaluation of the next timer in the nohz code is based on jiffies
while all the tick internals are nano seconds based. We have also to
convert hrtimer nanoseconds to jiffies in the !highres case. That's
just wrong and introduces interesting corner cases.
Turn it around and convert the next timer wheel timer expiry and the
rcu event to clock monotonic and base all calculations on
nanoseconds. That identifies the case where no timer is pending
clearly with an absolute expiry value of KTIME_MAX.
Makes the code more readable and gets rid of the jiffies magic in the
nohz code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.184198593@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In a misguided attempt to avoid an #ifdef, the use of the
gp_init_delay module parameter was conditioned on the corresponding
RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at
the point of use in the code. This meant that the compiler always saw
the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be
unconditionally defined. This in turn caused "make oldconfig" to ask
pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY
in cases where it was not even used.
This commit avoids these pointless questions by defining gp_init_delay
under #ifdef. In one branch, gp_init_delay is initialized to
RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus
allowing boot-time modification), and in the other branch gp_init_delay
is a const variable initialized by default to zero.
This approach also simplifies the code at the delay point by eliminating
the IS_DEFINED(). Because gp_init_delay is constant zero in the no-delay
case intended for production use, the "gp_init_delay > 0" check causes
the delay to become dead code, as desired in this case. In addition,
this commit replaces magic constant "10" with the preprocessor variable
PER_RCU_NODE_PERIOD, which controls the number of grace periods that
are allowed to elapse at full speed before a delay is inserted.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As noted in earlier commit logs, CPU hotplug operations running
concurrently with grace-period initialization can result in a given
leaf rcu_node structure having all CPUs offline and no blocked readers,
but with this rcu_node structure nevertheless blocking the current
grace period. Therefore, the quiescent-state forcing code now checks
for this situation and repairs it.
Unfortunately, this checking can result in false positives, for example,
when the last task has just removed itself from this leaf rcu_node
structure, but has not yet started clearing the ->qsmask bits further
up the structure. This means that the grace-period kthread (which
forces quiescent states) and some other task might be attempting to
concurrently clear these ->qsmask bits. This is usually not a problem:
One of these tasks will be the first to acquire the upper-level rcu_node
structure's lock and with therefore clear the bit, and the other task,
seeing the bit already cleared, will stop trying to clear bits.
Sadly, this means that the following unusual sequence of events -can-
result in a problem:
1. The grace-period kthread wins, and clears the ->qsmask bits.
2. This is the last thing blocking the current grace period, so
that the grace-period kthread clears ->qsmask bits all the way
to the root and finds that the root ->qsmask field is now zero.
3. Another grace period is required, so that the grace period kthread
initializes it, including setting all the needed qsmask bits.
4. The leaf rcu_node structure (the one that started this whole
mess) is blocking this new grace period, either because it
has at least one online CPU or because there is at least one
task that had blocked within an RCU read-side critical section
while running on one of this leaf rcu_node structure's CPUs.
(And yes, that CPU might well have gone offline before the
grace period in step (3) above started, which can mean that
there is a task on the leaf rcu_node structure's ->blkd_tasks
list, but ->qsmask equal to zero.)
5. The other kthread didn't get around to trying to clear the upper
level ->qsmask bits until all the above had happened. This means
that it now sees bits set in the upper-level ->qsmask field, so it
proceeds to clear them. Too bad that it is doing so on behalf of
a quiescent state that does not apply to the current grace period!
This sequence of events can result in the new grace period being too
short. It can also result in the new grace period ending before the
leaf rcu_node structure's ->qsmask bits have been cleared, which will
result in splats during initialization of the next grace period. In
addition, it can result in tasks blocking the new grace period still
being queued at the start of the next grace period, which will result
in other splats. Sasha's testing turned up another of these splats,
as did rcutorture testing. (And yes, rcutorture is being adjusted to
make these splats show up more quickly. Which probably is having the
undesirable side effect of making other problems show up less quickly.
Can't have everything!)
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 4.0.x
Tested-by: Sasha Levin <sasha.levin@oracle.com>
As noted earlier, the following sequence of events can occur when
running PREEMPT_RCU and HOTPLUG_CPU on a system with a multi-level
rcu_node combining tree:
1. A group of tasks block on CPUs corresponding to a given leaf
rcu_node structure while within RCU read-side critical sections.
2. All CPUs corrsponding to that rcu_node structure go offline.
3. The next grace period starts, but because there are still tasks
blocked, the upper-level bits corresponding to this leaf rcu_node
structure remain set.
4. All the tasks exit their RCU read-side critical sections and
remove themselves from the leaf rcu_node structure's list,
leaving it empty.
5. But because there now is code to check for this condition at
force-quiescent-state time, the upper bits are cleared and the
grace period completes.
However, there is another complication that can occur following step 4 above:
4a. The grace period starts, and the leaf rcu_node structure's
gp_tasks pointer is set to NULL because there are no tasks
blocked on this structure.
4b. One of the CPUs corresponding to the leaf rcu_node structure
comes back online.
4b. An endless stream of tasks are preempted within RCU read-side
critical sections on this CPU, such that the ->blkd_tasks
list is always non-empty.
The grace period will never end.
This commit therefore makes the force-quiescent-state processing check only
for absence of tasks blocking the current grace period rather than absence
of tasks altogether. This will cause a quiescent state to be reported if
the current leaf rcu_node structure is not blocking the current grace period
and its parent thinks that it is, regardless of how RCU managed to get
itself into this state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 4.0.x
Tested-by: Sasha Levin <sasha.levin@oracle.com>
At grace-period initialization time, RCU checks that all quiescent
states were really reported for the previous grace period. Now that
grace-period cleanup has been split out of grace-period initialization,
this commit also performs those checks at grace-period cleanup time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit informs RCU of an outgoing CPU just before that CPU invokes
arch_cpu_idle_dead() during its last pass through the idle loop (via a
new CPU_DYING_IDLE notifier value). This change means that RCU need not
deal with outgoing CPUs passing through the scheduler after informing
RCU that they are no longer online. Note that removing the CPU from
the rcu_node ->qsmaskinit bit masks is done at CPU_DYING_IDLE time,
and orphaning callbacks is still done at CPU_DEAD time, the reason being
that at CPU_DEAD time we have another CPU that can adopt them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because that RCU grace-period initialization need no longer exclude
CPU-hotplug operations, this commit eliminates the ->onoff_mutex and
its uses.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Races between CPU hotplug and grace periods can be difficult to resolve,
so the ->onoff_mutex is used to exclude the two events. Unfortunately,
this means that it is impossible for an outgoing CPU to perform the
last bits of its offlining from its last pass through the idle loop,
because sleeplocks cannot be acquired in that context.
This commit avoids these problems by buffering online and offline events
in a new ->qsmaskinitnext field in the leaf rcu_node structures. When a
grace period starts, the events accumulated in this mask are applied to
the ->qsmaskinit field, and, if needed, up the rcu_node tree. The special
case of all CPUs corresponding to a given leaf rcu_node structure being
offline while there are still elements in that structure's ->blkd_tasks
list is handled using a new ->wait_blkd_tasks field. In this case,
propagating the offline bits up the tree is deferred until the beginning
of the grace period after all of the tasks have exited their RCU read-side
critical sections and removed themselves from the list, at which point
the ->wait_blkd_tasks flag is cleared. If one of that leaf rcu_node
structure's CPUs comes back online before the list empties, then the
->wait_blkd_tasks flag is simply cleared.
This of course means that RCU's notion of which CPUs are offline can be
out of date. This is OK because RCU need only wait on CPUs that were
online at the time that the grace period started. In addition, RCU's
force-quiescent-state actions will handle the case where a CPU goes
offline after the grace period starts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_report_unblock_qs_rnp() function is invoked when the
last task blocking the current grace period exits its outermost
RCU read-side critical section. Previously, this was called only
from rcu_read_unlock_special(), and was therefore defined only when
CONFIG_RCU_PREEMPT=y. However, this function will be invoked even when
CONFIG_RCU_PREEMPT=n once CPU-hotplug operations are processed only at
the beginnings of RCU grace periods. The reason for this change is that
the last task on a given leaf rcu_node structure's ->blkd_tasks list
might well exit its RCU read-side critical section between the time that
recent CPU-hotplug operations were applied and when the new grace period
was initialized. This situation could result in RCU waiting forever on
that leaf rcu_node structure, because if all that structure's CPUs were
already offline, there would be no quiescent-state events to drive that
structure's part of the grace period.
This commit therefore moves rcu_report_unblock_qs_rnp() to common code
that is built unconditionally so that the quiescent-state-forcing code
can clean up after this situation, avoiding the grace-period stall.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the rcu_node tree ->expmask bitmasks are initially set to
reflect the online CPUs. This is pointless, because only the CPUs
preempted within RCU read-side critical sections by the preceding
synchronize_sched_expedited() need to be tracked. This commit therefore
instead sets up these bitmasks based on the state of the ->blkd_tasks
lists.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Offline CPUs cannot safely invoke trace events, but such CPUs do execute
within rcu_cpu_notify(). Therefore, this commit removes the trace events
from rcu_cpu_notify(). These trace events are for utilization, against
which rcu_cpu_notify() execution time should be negligible.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Grace-period initialization normally proceeds quite quickly, so
that it is very difficult to reproduce races against grace-period
initialization. This commit therefore allows grace-period
initialization to be artificially slowed down, increasing
race-reproduction probability. A pair of new Kconfig parameters are
provided, CONFIG_RCU_TORTURE_TEST_SLOW_INIT to enable the slowdowns, and
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY to specify the number of jiffies
of slowdown to apply. A boot-time parameter named rcutree.gp_init_delay
allows boot-time delay to be specified. By default, no delay will be
applied even if CONFIG_RCU_TORTURE_TEST_SLOW_INIT is set.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If all CPUs have passed through quiescent states, then stalls might be
due to starvation of the grace-period kthread or to failure to propagate
the quiescent states up the rcu_node combining tree. The current stall
warning messages do not differentiate, so this commit adds a printout
of the root rcu_node structure's ->qsmask field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, both rcu_cleanup_dead_cpu() and rcu_send_cbs_to_orphanage()
initialize the outgoing CPU's callback list. However, only
rcu_cleanup_dead_cpu() invokes rcu_send_cbs_to_orphanage(), and
it does so unconditionally, which means that only one of these
initializations is required. This commit therefore consolidates the
callback-list initialization with the rest of the callback handling in
rcu_send_cbs_to_orphanage().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because invoke_cpu_core() checks whether the current CPU is online,
there is no need for __call_rcu_core() to redundantly check it.
There should not be any performance degradation because the called
function is visible to the compiler. This commit therefore removes
the redundant check.
Signed-off-by: Yao Dongdong <yaodongdong@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The very similar functions rcu_force_quiescent_state(),
rcu_bh_force_quiescent_state(), and rcu_sched_force_quiescent_state()
are supposed to be together, but have drifted apart. This commit
restores rcu_sched_force_quiescent_state() to its rightful place.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If an RCU read-side critical section occurs within an interrupt handler
or a softirq handler, it cannot have been preempted. Therefore, there is
a check in rcu_read_unlock_special() checking for this error. However,
when this check triggers, it lacks diagnostic information. This commit
therefore moves rcu_read_unlock()'s lockdep annotation to follow the
call to __rcu_read_unlock() and changes rcu_read_unlock_special()'s
WARN_ON_ONCE() to an lockdep_rcu_suspicious() in order to locate where
the offending RCU read-side critical section began. In addition, the
value of the ->rcu_read_unlock_special field is printed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit uses IS_ENABLED() to remove the #ifdef from the
rcu_init_levelspread() functions. No effect on executable code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because callbacks can now be posted quite early in boot, move the
early boot callback tests to precede RCU initialization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When a CPU is first determined to be a no-CBs CPUs, this commit causes
any early boot callbacks to be moved to the no-CBs callback list,
allowing them to be invoked.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If the RCU grace-period kthread invoking rcu_sysidle_check_cpu()
happens to be running on the tick_do_timer_cpu initially,
then rcu_bind_gp_kthread() won't bind it. This kthread might
then migrate before invoking rcu_gp_fqs(), which will trigger the
WARN_ON_ONCE() in rcu_sysidle_check_cpu(). This commit therefore makes
rcu_bind_gp_kthread() do the binding even if the kthread is currently
on the same CPU. Because this incurs added overhead, this commit also
causes each RCU grace-period kthread to invoke rcu_bind_gp_kthread()
once at boot rather than at the beginning of each grace period.
And as long as rcu_bind_gp_kthread() is being modified, this commit
eliminates its #ifdef.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The standard code path accommodates a condition when no
RCU callbacks are ready to invoke. Since size of the code
is a priority for tiny RCU, remove the fast path.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When the ->curtail and ->donetail pointers differ, ->rcucblist
always points to the beginning of the current list and thus
cannot be NULL. Therefore, the check ->rcucblist != NULL is
redundant and this commit removes it.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On second and subsequent passes through quiescent-state forcing, the
isidle variable was initialized to false, which would prevent full sysidle
state from being reached if a grace period needed more than one round
of quiescent-state forcing (which most should not). However, the check
for offline CPUs in the quiescent-state forcing main loop had the wrong
sense, which could prevent CPUs from ever entering full sysidle state.
This commit fixes both of these bugs. Given that sysidle is not yet
wired up, this has no effect in old kernels, but might have proven
frustrating had anyone attempted to wire it up.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "if" statement at the beginning of rcu_torture_writer() should
use the same set of variables. In theory, this does not matter because
the corresponding variables (gp_sync and gp_sync1) have the same value
at this point in the code, but in practice such puzzles should be
removed. This commit therefore makes the use of variables consistent.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a CONFIG_RCU_EXPEDITE_BOOT Kconfig parameter
that emulates a very early boot rcu_expedite_gp(). A late-boot
call to rcu_end_inkernel_boot() will provide the corresponding
rcu_unexpedite_gp(). The late-boot call to rcu_end_inkernel_boot()
should be made just before init is spawned.
According to Arjan:
> To show the boot time, I'm using the timestamp of the "Write protecting"
> line, that's pretty much the last thing we print prior to ring 3 execution.
>
> A kernel with default RCU behavior (inside KVM, only virtual devices)
> looks like this:
>
> [ 0.038724] Write protecting the kernel read-only data: 10240k
>
> a kernel with expedited RCU (using the command line option, so that I
> don't have to recompile between measurements and thus am completely
> oranges-to-oranges)
>
> [ 0.031768] Write protecting the kernel read-only data: 10240k
>
> which, in percentage, is an 18% improvement.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Arjan van de Ven <arjan@linux.intel.com>
This commit updates open-coded tests of the rcu_expedited variable
to instead use rcu_gp_is_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, expediting of normal synchronous grace-period primitives
(synchronize_rcu() and friends) is controlled by the rcu_expedited()
boot/sysfs parameter. This works well, but does not handle nesting.
This commit therefore provides rcu_expedite_gp() to enable expediting
and rcu_unexpedite_gp() to cancel a prior rcu_expedite_gp(), both of
which support nesting.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When a CPU comes online, it initializes its callback list. This
is a bad thing if this is the first time that the CPU has come
online and if that CPU has early boot callbacks. This commit therefore
avoid initializing the callback list if there are callbacks present,
in which case the initial call_rcu() did the initialization for us.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some diagnostics under CONFIG_PROVE_RCU in rcu_nocb_cpu_needs_barrier()
assume that there can be no early-boot callbacks. This commit therefore
qualifies the diagnostic with rcu_scheduler_fully_active to permit
early boot callbacks to avoid this splat.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, a call_rcu() that precedes rcu_init() will splat due to the
callback lists not having yet been initialized. This commit causes the
first such callback to initialize the boot CPU's RCU callback list.
Note that this commit does not change rcu_init()-time initialization,
which means that the callback will be discarded at rcu_init() time.
Fixing this is the job of later commits.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit wires up the rcu_state structures' ->rda pointers to the
per-CPU rcu_data structures at compile time, thus ensuring that this
linkage is present at early boot, in turn allowing posting of callbacks
before rcu_init() is executed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In preparation for early-boot posting of callbacks, this commit abstracts
initialization of the default (non-no-CB) callbacks list from the
init_callback_list() function into a new init_default_callback_list()
function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In rcu_gp_init(), rnp->completed equals to rsp->completed in THEORY,
we don't need to touch it normally. If something goes wrong,
it will complain and fixup rnp->completed and avoid oops.
This commit thus avoids the normal needless store to rnp->completed.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There are currently duplicate identical definitions of the
rcu_synchronize() structure and the wakeme_after_rcu() function.
Thie commit therefore consolidates them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull rcu fix and x86 irq fix from Ingo Molnar:
- Fix a bug that caused an RCU warning splat.
- Two x86 irq related fixes: a hotplug crash fix and an ACPI IRQ
registry fix.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Clear need_qs flag to prevent splat
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Check for valid irq descriptor in check_irq_vectors_for_cpu_disable()
x86/irq: Fix regression caused by commit b568b8601f
printk and friends can now format bitmaps using '%*pb[l]'. cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the scheduling-clock interrupt sets the current tasks need_qs flag,
but if the current CPU passes through a quiescent state in the meantime,
then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool
RCU into thinking that additional rcu_read_unlock_special() processing
is needed. This commit therefore clears the need_qs flag before checking
for additional processing.
For this problem to occur, we need rcu_preempt_data.passed_quiesce equal
to true and current->rcu_read_unlock_special.b.need_qs also equal to true.
This condition can occur as follows:
1. CPU 0 is aware of the current preemptible RCU grace period,
but has not yet passed through a quiescent state. Among other
things, this means that rcu_preempt_data.passed_quiesce is false.
2. Task A running on CPU 0 enters a preemptible RCU read-side
critical section.
3. CPU 0 takes a scheduling-clock interrupt, which notices the
RCU read-side critical section and the need for a quiescent state,
and thus sets current->rcu_read_unlock_special.b.need_qs to true.
4. Task A is preempted, enters the scheduler, eventually invoking
rcu_preempt_note_context_switch() which in turn invokes
rcu_preempt_qs().
Because rcu_preempt_data.passed_quiesce is false,
control enters the body of the "if" statement, which sets
rcu_preempt_data.passed_quiesce to true.
5. At this point, CPU 0 takes an interrupt. The interrupt
handler contains an RCU read-side critical section, and
the rcu_read_unlock() notes that current->rcu_read_unlock_special
is nonzero, and thus invokes rcu_read_unlock_special().
6. Once in rcu_read_unlock_special(), the fact that
current->rcu_read_unlock_special.b.need_qs is true becomes
apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs().
Recursively, given that we interrupted out of that same
function in the preceding step.
7. Because rcu_preempt_data.passed_quiesce is now true,
rcu_preempt_qs() does nothing, and simply returns.
8. Upon return to rcu_read_unlock_special(), it is noted that
current->rcu_read_unlock_special is still nonzero (because
the interrupted rcu_preempt_qs() had not yet gotten around
to clearing current->rcu_read_unlock_special.b.need_qs).
9. Execution proceeds to the WARN_ON_ONCE(), which notes that
we are in an interrupt handler and thus duly splats.
The solution, as noted above, is to make rcu_read_unlock_special()
clear out current->rcu_read_unlock_special.b.need_qs after calling
rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again,
but this is harmless. The worst that happens is that we clobber another
attempt to set this field, but this is not a problem because we just
got done reporting a quiescent state.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix embarrassing build bug noted by Sasha Levin. ]
Tested-by: Sasha Levin <sasha.levin@oracle.com>
The current tiny RCU stall-warning code assumes that the jiffies counter
starts at zero, however, it is sometimes initialized to other values,
for example, -30,000. This commit therefore changes rcu_init() to
invoke reset_cpu_stall_ticks() for both flavors of RCU to initialize
the stall-warning times properly at boot.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The tiny RCU CPU stall detection depends on *rcp->curtail not being
NULL. It is however a tail pointer and thus NULL by definition. Instead we
should check rcp->rcucblist for the presence of pending callbacks which
need to be processed. With this fix INFO about the stall is printed and
jiffies_stall (jiffies at next stall) correctly updated.
Note that the check for pending callback is necessary to avoid spurious
warnings if there are no pendings callbacks.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
[ paulmck: Fused identical "if" statements, ported to -rcu. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a message that is printed if the relevant grace-period
kthread has not been able to run for the two seconds preceding the
stall warning. (The two seconds is double the maximum interval between
successive bouts of quiescent-state forcing.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although cond_resched_rcu_qs() only applies to TASKS_RCU, it is used
in places where it would be useful for it to apply to the normal RCU
flavors, rcu_preempt, rcu_sched, and rcu_bh. This is especially the
case for workloads that aggressively overload the system, particularly
those that generate large numbers of RCU updates on systems running
NO_HZ_FULL CPUs. This commit therefore communicates quiescent states
from cond_resched_rcu_qs() to the normal RCU flavors.
Note that it is unfortunately necessary to leave the old ->passed_quiesce
mechanism in place to allow quiescent states that apply to only one
flavor to be recorded. (Yes, we could decrement ->rcu_qs_ctr_snap in
that case, but that is not so good for debugging of RCU internals.)
In addition, if one of the RCU flavor's grace period has stalled, this
will invoke rcu_momentary_dyntick_idle(), resulting in a heavy-weight
quiescent state visible from other CPUs.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Merge commit from Sasha Levin fixing a bug where __this_cpu()
was used in preemptible code. ]
Recent testing has shown that under heavy load, running RCU's grace-period
kthreads at real-time priority can improve performance (according to 0day
test robot) and reduce the incidence of RCU CPU stall warnings. However,
most systems do just fine with the default non-realtime priorities for
these kthreads, and it does not make sense to expose the entire user
base to any risk stemming from this change, given that this change is
of use only to a few users running extremely heavy workloads.
Therefore, this commit allows users to specify realtime priorities
for the grace-period kthreads, but leaves them running SCHED_OTHER
by default. The realtime priority may be specified at build time
via the RCU_KTHREAD_PRIO Kconfig parameter, or at boot time via the
rcutree.kthread_prio parameter. Either way, 0 says to continue the
default SCHED_OTHER behavior and values from 1-99 specify that priority
of SCHED_FIFO behavior. Note that a value of 0 is not permitted when
the RCU_BOOST Kconfig parameter is specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney
Boqun Feng
Dmitry Vyukov
Linus Torvalds
Peter Zijlstra
Ingo Molnar
Thomas Gleixner
Paul Gortmaker
Daniel Wagner
Chen Gang
Oleg Nesterov
Petr Mladek
Alexei Starovoitov
Alexander Gordeev
Nicholas Mc Guire
Denys Vlasenko
Nicolas Iooss
Patrick Daly
Joe Perches
Steven Rostedt (Red Hat)
Yao Dongdong
Lai Jiangshan
Tejun Heo
Miroslav Benes