Commit Graph

284 Commits

Author SHA1 Message Date
Yinghai Lu 497f16f21a pci: Fix hotplug of Express Module with pci bridges
I noticed that hotplug of one setup does not work with recent change in
pci tree.

After checking the bridge conf setup, I noticed that the bridges get
assigned but do not get enabled.

The reason is the following commit, while simply ignores bridge
resources when enabling a pci device:

| commit bbef98ab0f
| Author: Ram Pai <linuxram@us.ibm.com>
| Date:   Sun Nov 6 10:33:10 2011 +0800
|
|    PCI: defer enablement of SRIOV BARS
|...
|    NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
|    driver that depends on SRIOV BARS to be enabled in pci_enable_device()
|    can fail.

Put back bridge resource and ROM resource checking to fix the problem.

That should fix regression like BIOS does not assign correct resource to
bridge.

Discussion can be found at:
	http://www.spinics.net/lists/linux-pci/msg12874.html

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-18 14:10:16 -08:00
Ajaykumar Hotchandani b51306c634 PCI: Set device power state to PCI_D0 for device without native PM support
During test of one IB card with guest VM, found that, msi is not
initialized properly.

It turns out __write_msi_msg will do nothing if device current_state is
not PCI_D0.  And, that pci device does not have pm_cap in guest VM.

There is an error in setting of power state to PCI_D0 in
pci_enable_device(), but error is not returned for this.  Following is
code flow:

pci_enable_device() -->   __pci_enable_device_flags() -->
do_pci_enable_device() -->   pci_set_power_state() -->
__pci_start_power_transition()

We have following condition inside __pci_start_power_transition():
         if (platform_pci_power_manageable(dev)) {
                 error = platform_pci_set_power_state(dev, state);
                 if (!error)
                         pci_update_current_state(dev, state);
         } else {
                 error = -ENODEV;
                 /* Fall back to PCI_D0 if native PM is not supported */
                 if (!dev->pm_cap)
                         dev->current_state = PCI_D0;
         }

Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is
getting called and that is failing with ENODEV because of following
condition:

         if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp)))
                 return -ENODEV;

Because of that, pci_update_current_state() is not getting called.

With this patch, if device power state can not be set via
platform_pci_set_power_state and that device does not have native pm
support, then PCI device power state will be set to PCI_D0.

-v2: This also reverts 47e9037ac1, as it's
     not needed after this change.

Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ajaykumar Hotchandani<ajaykumar.hotchandani@oracle.com>
Signed-off-by: Yinghai Lu<yinghai.lu@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-14 08:26:42 -08:00
Ram Pai bbef98ab0f PCI: defer enablement of SRIOV BARS
All the PCI BARs of a device are enabled when the device is enabled
using pci_enable_device().  This unnecessarily enables SRIOV BARs of the
device.

On some platforms, which do not support SRIOV as yet, the
pci_enable_device() fails to enable the device if its SRIOV BARs are not
allocated resources correctly.

The following patch fixes the above problem. The SRIOV BARs are now
enabled when IOV capability of the device is enabled in sriov_enable().

NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
driver that depends on SRIOV BARS to be enabled in pci_enable_device()
can fail.

The patch has been touch tested on power and x86 platform.

Tested-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05 10:30:22 -08:00
Benjamin Herrenschmidt a1c473aa11 pci: Clamp pcie_set_readrq() when using "performance" settings
When configuring the PCIe settings for "performance", we allow parents
to have a larger Max Payload Size than children and rely on children
Max Read Request Size to not be larger than their own MPS to avoid
having the host bridge generate responses they can't cope with.

However, various drivers in Linux call pci_set_readrq() with arbitrary
values, assuming this to be a simple performance tweak. This breaks
under our "performance" configuration.

Fix that by making sure the value programmed by pcie_set_readrq() is
never larger than the configured MPS for that device.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jon Mason <mason@myri.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-27 12:45:44 -07:00
Rafael J. Wysocki 379021d5c0 PCI / PM: Extend PME polling to all PCI devices
The land of PCI power management is a land of sorrow and ugliness,
especially in the area of signaling events by devices.  There are
devices that set their PME Status bits, but don't really bother
to send a PME message or assert PME#.  There are hardware vendors
who don't connect PME# lines to the system core logic (they know
who they are).  There are PCI Express Root Ports that don't bother
to trigger interrupts when they receive PME messages from the devices
below.  There are ACPI BIOSes that forget to provide _PRW methods for
devices capable of signaling wakeup.  Finally, there are BIOSes that
do provide _PRW methods for such devices, but then don't bother to
call Notify() for those devices from the corresponding _Lxx/_Exx
GPE-handling methods.  In all of these cases the kernel doesn't have
a chance to receive a proper notification that it should wake up a
device, so devices stay in low-power states forever.  Worse yet, in
some cases they continuously send PME Messages that are silently
ignored, because the kernel simply doesn't know that it should clear
the device's PME Status bit.

This problem was first observed for "parallel" (non-Express) PCI
devices on add-on cards and Matthew Garrett addressed it by adding
code that polls PME Status bits of such devices, if they are enabled
to signal PME, to the kernel.  Recently, however, it has turned out
that PCI Express devices are also affected by this issue and that it
is not limited to add-on devices, so it seems necessary to extend
the PME polling to all PCI devices, including PCI Express and planar
ones.  Still, it would be wasteful to poll the PME Status bits of
devices that are known to receive proper PME notifications, so make
the kernel (1) poll the PME Status bits of all PCI and PCIe devices
enabled to signal PME and (2) disable the PME Status polling for
devices for which correct PME notifications are received.

Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14 09:05:31 -07:00
Jon Mason 5f39e6705f PCI: Disable MPS configuration by default
Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults.  Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.

Also, add the option for peer to peer DMA MPS configuration.  Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another.  To work around this, simply make the system
wide MPS the smallest possible value (128B).

Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-04 09:52:28 -07:00
Jon Mason ed2888e906 PCI: Remove MRRS modification from MPS setting code
Modifying the Maximum Read Request Size to 0 (value of 128Bytes) has
massive negative ramifications on some devices.  Without knowing which
devices have this issue, do not modify from the default value when
walking the PCI-E bus in pcie_bus_safe mode.  Also, make pcie_bus_safe
the default procedure.

Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Simon Kirby <sim@hostway.ca>
Tested-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-and-tested-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
References: https://bugzilla.kernel.org/show_bug.cgi?id=42162
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-09 19:49:58 -07:00
Randy Dunlap 47c08f3107 pci: fix new kernel-doc warning in pci.c
Fix new kernel-doc warning in pci.c:

  Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps'
  Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-20 18:02:32 -07:00
Jon Mason b03e7495a8 PCI: Set PCI-E Max Payload Size on fabric
On a given PCI-E fabric, each device, bridge, and root port can have a
different PCI-E maximum payload size.  There is a sizable performance
boost for having the largest possible maximum payload size on each PCI-E
device.  However, if improperly configured, fatal bus errors can occur.
Thus, it is important to ensure that PCI-E payloads sends by a device
are never larger than the MPS setting of all devices on the way to the
destination.

This can be achieved two ways:

- A conservative approach is to use the smallest common denominator of
  the entire tree below a root complex for every device on that fabric.

This means for example that having a 128 bytes MPS USB controller on one
leg of a switch will dramatically reduce performances of a video card or
10GE adapter on another leg of that same switch.

It also means that any hierarchy supporting hotplug slots (including
expresscard or thunderbolt I suppose, dbl check that) will have to be
entirely clamped to 128 bytes since we cannot predict what will be
plugged into those slots, and we cannot change the MPS on a "live"
system.

- A more optimal way is possible, if it falls within a couple of
  constraints:
* The top-level host bridge will never generate packets larger than the
  smallest TLP (or if it can be controlled independently from its MPS at
  least)
* The device will never generate packets larger than MPS (which can be
  configured via MRRS)
* No support of direct PCI-E <-> PCI-E transfers between devices without
  some additional code to specifically deal with that case

Then we can use an approach that basically ignores downstream requests
and focuses exclusively on upstream requests. In that case, all we need
to care about is that a device MPS is no larger than its parent MPS,
which allows us to keep all switches/bridges to the max MPS supported by
their parent and eventually the PHB.

In this case, your USB controller would no longer "starve" your 10GE
Ethernet and your hotplug slots won't affect your global MPS.
Additionally, the hotplugged devices themselves can be configured to a
larger MPS up to the value configured in the hotplug bridge.

To choose between the two available options, two PCI kernel boot args
have been added to the PCI calls.  "pcie_bus_safe" will provide the
former behavior, while "pcie_bus_perf" will perform the latter behavior.
By default, the latter behavior is used.

NOTE: due to the location of the enablement, each arch will need to add
calls to this function.  This patch only enables x86.

This patch includes a number of changes recommended by Benjamin
Herrenschmidt.

Tested-by: Jordan_Hargrave@dell.com
Signed-off-by: Jon Mason <mason@myri.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01 11:49:16 -07:00
Jon Mason c9b378c7cb PCI: correct pcie_set_readrq write size
When setting the PCI-E MRRS, pcie_set_readrq queries the current
settings via a pci_read_config_word call but writes the modified result
via a pci_write_config_dword.  This results in writing 16 more bits than
were queried.

Also, the function description comment is slightly incorrect.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 09:06:51 -07:00
Chris Wright 864d296cf9 PCI: ARI is a PCIe v2 feature
The function pci_enable_ari() may mistakenly set the downstream port
of a v1 PCIe switch in ARI Forwarding mode.  This is a PCIe v2 feature,
and with an SR-IOV device on that switch port believing the switch above
is ARI capable it may attempt to use functions 8-255, translating into
invalid (non-zero) device numbers for that bus.  This has been seen
to cause Completion Timeouts and general misbehaviour including hangs
and panics.

Cc: stable@kernel.org
Acked-by: Don Dutile <ddutile@redhat.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:41:51 -07:00
Ram Pai f483d3923d PCI: conditional resource-reallocation through kernel parameter pci=realloc
Multiple attempts to dynamically reallocate pci resources have
unfortunately lead to regressions. Though we continue to fix the
regressions and fine tune the dynamic-reallocation behavior, we have not
reached a acceptable state yet.
    
This patch provides a interim solution. It disables dynamic reallocation
by default, but adds the ability to enable it through pci=realloc kernel
command line parameter.
    
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-08 15:49:20 -07:00
Linus Torvalds 12f1ba5a7d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI/ACPI: fix type mismatch
  PCI: fix new kernel-doc warning
  PCI: Fix warning in drivers/pci/probe.c on sparc64
2011-06-24 08:36:16 -07:00
Dave Airlie 7ad35cf288 x86/uv/x2apic: update for change in pci bridge handling.
When I added 3448a19da4
I forgot about the special uv handling code for this, so this
patch fixes it up.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ingo Molnar
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 09:50:12 +10:00
Randy Dunlap 3f37d6229c PCI: fix new kernel-doc warning
Fix pci.c kernel-doc warnings:

Warning(drivers/pci/pci.c:3292): No description found for parameter 'flags'
Warning(drivers/pci/pci.c:3292): Excess function parameter 'change_bridge_flags' description in 'pci_set_vga_state'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-01 11:43:29 -07:00
Linus Torvalds 98b98d3163 Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
  drivers/gpu/drm/radeon/atom.c: fix warning
  drm/radeon/kms: bump kms version number
  drm/radeon/kms: properly set num banks for fusion asics
  drm/radeon/kms/atom: move dig phy init out of modesetting
  drm/radeon/kms/cayman: fix typo in register mask
  drm/radeon/kms: fix typo in spread spectrum code
  drm/radeon/kms: fix tile_config value reported to userspace on cayman.
  drm/radeon/kms: fix incorrect comparison in cayman setup code.
  drm/radeon/kms: add wait idle ioctl for eg->cayman
  drm/radeon/cayman: setup hdp to invalidate and flush when asked
  drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
  agp/uninorth: Fix lockups with radeon KMS and >1x.
  drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
  drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
  drm/radeon/kms: fixup eDP connector handling
  drm/radeon/kms: bail early for eDP in hotplug callback
  drm/radeon/kms: simplify hotplug handler logic
  drm/radeon/kms: rewrite DP handling
  drm/radeon/kms/atom: add support for setting DP panel mode
  drm/radeon/kms: atombios.h updates for DP panel mode
  ...
2011-05-24 12:06:40 -07:00
Alex Williamson ffbdd3f793 PCI: Add interfaces to store and load the device saved state
For KVM device assignment, we'd like to save off the state of a device
prior to passing it to the guest and restore it later.  We also want
to allow pci_reset_funciton() to be called while the device is owned
by the guest.  This however overwrites and invalidates the struct pci_dev
buffers, so we can't just manually call save and restore.  Add generic
interfaces for the saved state to be stored and reloaded back into
struct pci_dev at a later time.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-21 12:17:09 -07:00
Alex Williamson 24a4742f0b PCI: Track the size of each saved capability data area
This will allow us to store and load it later.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-21 12:17:08 -07:00
Jesse Barnes 51c2e0a7e5 PCI: add latency tolerance reporting enable/disable support
Latency tolerance reporting allows devices to send messages to the root
complex indicating their latency tolerance for snooped & unsnooped
memory transactions.  Add support for enabling & disabling this
feature, along with a routine to set the max latencies a device should
send upstream.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11 15:18:53 -07:00
Jesse Barnes 48a92a8179 PCI: add OBFF enable/disable support
OBFF (optimized buffer flush/fill), where supported, can help improve
energy efficiency by giving devices information about when interrupts
and other activity will have a reduced power impact.  It requires
support from both the device and system (i.e. not only does the device
need to respond to OBFF messages, but the platform must be capable of
generating and routing them to the end point).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11 15:18:48 -07:00
Jesse Barnes b48d4425b6 PCI: add ID-based ordering enable/disable support
Add support to allow drivers to enable/disable ID-based ordering.  Where
supported, ID-based ordering can significantly improve the latency of
individual requests by preventing them from queueing up behind unrelated
traffic.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11 15:18:40 -07:00
Rafael J. Wysocki 83d74e036b PCI/PM: Add kerneldoc description of pci_pm_reset()
The pci_pm_reset() function is not a very nice interface due to its
limitations and conditional behavior (e.g. it doesn't affect devices
in low-power states), but it cannot be simply dropped, because
existing device drivers may depend on it.  However, its behavior and
limitations should be well documented, so add an appropriate
kerneldoc comment to it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-10 15:43:29 -07:00
Dave Airlie 3448a19da4 vgaarb: use bridges to control VGA routing where possible.
So in a lot of modern systems, a GPU will always be below a parent bridge that won't share with any other GPUs. This means VGA arbitration on those GPUs can be controlled by using the bridge routing instead of io/mem decodes.

The problem is locating which GPUs share which upstream bridges. This patch attempts to identify all the GPUs which can be controlled via bridges, and ones that can't. This patch endeavours to work out the bridge sharing semantics.

When disabling GPUs via a bridge, it doesn't do irq callbacks or touch the io/mem decodes for the gpu.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-04 13:38:46 +10:00
Naga Chumbalkar 1a680b7c32 PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
v3 -> v2: Moved ASPM enabling logic to pci_set_power_state()
v2 -> v1: Preserved the logic in pci_raw_set_power_state()
	: Added ASPM enabling logic after scanning Root Bridge
	: http://marc.info/?l=linux-pci&m=130046996216391&w=2
v1	: http://marc.info/?l=linux-pci&m=130013164703283&w=2

The assumption made in commit 41cd766b06
(PCI: Don't enable aspm before drivers have had a chance to veto it) that
pci_enable_device() will result in re-configuring ASPM when aspm_policy is
POWERSAVE is no longer valid.  This is due to commit
97c145f7c8 (PCI: read current power state
at enable time) which resets dev->current_state to D0. Due to this the
call to pcie_aspm_pm_state_change() is never made. Note the equality check
(below) that returns early:
./drivers/pci/pci.c: pci_raw_set_pci_power_state()
546         /* Check if we're already there */
547         if (dev->current_state == state)
548                 return 0;

Therefore OSPM never configures the PCIe links for ASPM to turn them "on".

Fix it by configuring ASPM from the pci_enable_device() code path. This
also allows a driver such as the e1000e networking driver a chance to
disable ASPM (L0s, L1), if need be, prior to enabling the device. A
driver may perform this action if the device is known to mis-behave
wrt ASPM.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 09:40:43 -07:00
Rafael J. Wysocki 0f953bf6b4 PCI/PM: Report wakeup events before resuming devices
Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Rafael J. Wysocki b6e335aeeb PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Jon Mason 1d3c16a818 PCI: make pci_restore_state return void
pci_restore_state only ever returns 0, thus there is no benefit in
having it return any value.  Also, a large majority of the callers do
not check the return code of pci_restore_state.  Make the
pci_restore_state a void return and avoid the overhead.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:09 -08:00
Jesse Barnes 97c145f7c8 PCI: read current power state at enable time
When we enable a PCI device, we avoid doing a lot of the initial setup
work if the device's enable count is non-zero.  If we don't fetch the
power state though, we may later fail to set up MSI due to the unknown
status.  So pick it up before we short circuit the rest due to a
pre-existing enable or mismatched enable/disable pair (as happens with
VGA devices, which are special in a special way).

Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Reported-by: Dave Airlie <airlied@linux.ie>
Tested-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11 09:38:14 -08:00
Matthew Garrett df17e62e5b PCI: Add support for polling PME state on suspended legacy PCI devices
Not all hardware vendors hook up the PME line for legacy PCI devices,
meaning that wakeup events get lost. The only way around this is to poll
the devices to see if their state has changed, so add support for doing
that on legacy PCI devices that aren't part of the core chipset.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17 20:03:06 -07:00
Julia Lawall 93e75faba3 PCI: Adjust confusing if indentation in pcie_get_readrq
Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15 13:09:46 -07:00
Linus Torvalds 1cfd2bda8c Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits)
  PCI: update for owner removal from struct device_attribute
  PCI: Fix warnings when CONFIG_DMI unset
  PCI: Do not run NVidia quirks related to MSI with MSI disabled
  x86/PCI: use for_each_pci_dev()
  PCI: use for_each_pci_dev()
  PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()
  PCI: export SMBIOS provided firmware instance and label to sysfs
  PCI: Allow read/write access to sysfs I/O port resources
  x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN
  PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}
  PCI: disable mmio during bar sizing
  PCI: MSI: Remove unsafe and unnecessary hardware access
  PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable
  PCI: kernel oops on access to pci proc file while hot-removal
  PCI: pci-sysfs: remove casts from void*
  ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe
  PCI hotplug: make sure child bridges are enabled at hotplug time
  PCI hotplug: shpchp: Removed check for hotplug of display devices
  PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device
  PCI: Don't enable aspm before drivers have had a chance to veto it
  ...
2010-08-06 11:44:36 -07:00
FUJITA Tomonori bfb51cd016 PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}
In 2.6.34, we transformed the PCI DMA API into the generic device
mode. The PCI DMA API is just the wrapper of the DMA API.

So we don't need HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE or
HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY (which enable architectures to
have the own implementations). Both haven't been used anyway.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30 09:29:36 -07:00
Rafael J. Wysocki c125e96f04 PM: Make it possible to avoid races between wakeup and system sleep
One of the arguments during the suspend blockers discussion was that
the mainline kernel didn't contain any mechanisms making it possible
to avoid races between wakeup and system suspend.

Generally, there are two problems in that area.  First, if a wakeup
event occurs exactly when /sys/power/state is being written to, it
may be delivered to user space right before the freezer kicks in, so
the user space consumer of the event may not be able to process it
before the system is suspended.  Second, if a wakeup event occurs
after user space has been frozen, it is not generally guaranteed that
the ongoing transition of the system into a sleep state will be
aborted.

To address these issues introduce a new global sysfs attribute,
/sys/power/wakeup_count, associated with a running counter of wakeup
events and three helper functions, pm_stay_awake(), pm_relax(), and
pm_wakeup_event(), that may be used by kernel subsystems to control
the behavior of this attribute and to request the PM core to abort
system transitions into a sleep state already in progress.

The /sys/power/wakeup_count file may be read from or written to by
user space.  Reads will always succeed (unless interrupted by a
signal) and return the current value of the wakeup events counter.
Writes, however, will only succeed if the written number is equal to
the current value of the wakeup events counter.  If a write is
successful, it will cause the kernel to save the current value of the
wakeup events counter and to abort the subsequent system transition
into a sleep state if any wakeup events are reported after the write
has returned.

[The assumption is that before writing to /sys/power/state user space
will first read from /sys/power/wakeup_count.  Next, user space
consumers of wakeup events will have a chance to acknowledge or
veto the upcoming system transition to a sleep state.  Finally, if
the transition is allowed to proceed, /sys/power/wakeup_count will
be written to and if that succeeds, /sys/power/state will be written
to as well.  Still, if any wakeup events are reported to the PM core
by kernel subsystems after that point, the transition will be
aborted.]

Additionally, put a wakeup events counter into struct dev_pm_info and
make these per-device wakeup event counters available via sysfs,
so that it's possible to check the activity of various wakeup event
sources within the kernel.

To illustrate how subsystems can use pm_wakeup_event(), make the
low-level PCI runtime PM wakeup-handling code use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-19 01:58:48 +02:00
Michael S. Tsirkin b03214d559 virtio-pci: disable msi at startup
virtio-pci resets the device at startup by writing to the status
register, but this does not clear the pci config space,
specifically msi enable status which affects register
layout.

This breaks things like kdump when they try to use e.g. virtio-blk.

Fix by forcing msi off at startup. Since pci.c already has
a routine to do this, we export and use it instead of duplicating code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2010-06-23 22:49:07 +09:30
Linus Torvalds 6109e2ce26 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits)
  PCI: hotplug: pciehp: Removed check for hotplug of display devices
  PCI: read memory ranges out of Broadcom CNB20LE host bridge
  PCI: Allow manual resource allocation for PCI hotplug bridges
  x86/PCI: make ACPI MCFG reserved error messages ACPI specific
  PCI hotplug: Use kmemdup
  PM/PCI: Update PCI power management documentation
  PCI: output FW warning in pci_read/write_vpd
  PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
  PCI quirks: disable msi on AMD rs4xx internal gfx bridges
  PCI: Disable MSI for MCP55 on P5N32-E SLI
  x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs
  PCI: aerdrv: trivial cleanup for aerdrv_core.c
  PCI: aerdrv: trivial cleanup for aerdrv.c
  PCI: aerdrv: introduce default_downstream_reset_link
  PCI: aerdrv: rework find_aer_service
  PCI: aerdrv: remove is_downstream
  PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS
  PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC
  PCI: aerdrv: rework do_recovery
  PCI: aerdrv: rework get_e_source()
  ...
2010-05-21 18:58:52 -07:00
Linus Torvalds f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Roman Fietze ee6583f6e8 PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
This fixes all occurrences of pci_enable_device and pci_disable_device
in all comments. There are no code changes involved.

Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 14:59:08 -07:00
Alan Stern 52b265a127 PCI: clearing wakeup flags not needed
This patch (as1353) removes a couple of unnecessary assignments from
the PCI core.  The should_wakeup flag is naturally initialized to 0;
there's no need to clear it.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:08 -07:00
Jiri Kosina 6c9468e9eb Merge branch 'master' into for-next 2010-04-23 02:08:44 +02:00
Matthew Garrett cc2893b6af PCI: Ensure we re-enable devices on resume
If the firmware puts a device back into D0 state at resume time, we'll
update its state in resume_noirq and thus skip the platform resume code.
Calling that code twice should be safe and we ought to avoid getting to
that point anyway, so remove the check and also allow the platform pci
code to be called for D0.

Fixes USB not being powered after resume on recent Lenovo machines.

Acked-by: Alex Chiang <achiang@canonical.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-22 16:13:47 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dean Nelson 7c9e2b1c47 PCI: cleanup error return for pcix get and set mmrbc functions
pcix_get_mmrbc() returns the maximum memory read byte count (mmrbc), if
successful, or an appropriate error value, if not.

Distinguishing errors from correct values and understanding the meaning of an
error can be somewhat confusing in that:

	correct values: 512, 1024, 2048, 4096
	errors: -EINVAL  			-22
 		PCIBIOS_FUNC_NOT_SUPPORTED	0x81
		PCIBIOS_BAD_VENDOR_ID		0x83
		PCIBIOS_DEVICE_NOT_FOUND	0x86
		PCIBIOS_BAD_REGISTER_NUMBER	0x87
		PCIBIOS_SET_FAILED		0x88
		PCIBIOS_BUFFER_TOO_SMALL	0x89

The PCIBIOS_ errors are returned from the PCI functions generated by the
PCI_OP_READ() and PCI_OP_WRITE() macros.

In a similar manner, pcix_set_mmrbc() also returns the PCIBIOS_ error values
returned from pci_read_config_[word|dword]() and pci_write_config_word().

Following pcix_get_max_mmrbc()'s example, the following patch simply returns
-EINVAL for all PCIBIOS_ errors encountered by pcix_get_mmrbc(), and -EINVAL
or -EIO for those encountered by pcix_set_mmrbc().

This simplification was chosen in light of the fact that none of the current
callers of these functions are interested in the specific type of error
encountered. In the future, should this change, one could simply create a
function that maps each PCIBIOS_ error to a corresponding unique errno value,
which could be called by pcix_get_max_mmrbc(), pcix_get_mmrbc(), and
pcix_set_mmrbc().

Additionally, this patch eliminates some unnecessary variables.

Cc: stable@kernel.org
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-19 12:41:48 -07:00
Dean Nelson bdc2bda7c4 PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions
An e1000 driver on a system with a PCI-X bus was always being returned
a value of 135 from both pcix_get_mmrbc() and pcix_set_mmrbc(). This
value reflects an error return of PCIBIOS_BAD_REGISTER_NUMBER from
pci_bus_read_config_dword(,, cap + PCI_X_CMD,).

This is because for a dword, the following portion of the PCI_OP_READ()
macro:

	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;

expands to:

	if (pos & 3) return PCIBIOS_BAD_REGISTER_NUMBER;

And is always true for 'cap + PCI_X_CMD', which is 0xe4 + 2 = 0xe6. ('cap' is
the result of calling pci_find_capability(, PCI_CAP_ID_PCIX).)

The same problem exists for pci_bus_write_config_dword(,, cap + PCI_X_CMD,).
In both cases, instead of calling _dword(), _word() should be called.

Cc: stable@kernel.org
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-19 12:40:22 -07:00
Paul Mundt ded1d8f29b PCI: kill off pci_register_set_vga_state() symbol export.
When pci_register_set_vga_state() was made __init, the EXPORT_SYMBOL() was
retained, which now leaves us with a section mismatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-19 12:38:18 -07:00
Dean Nelson 25daeb550b PCI: fix return value from pcix_get_max_mmrbc()
For the PCI_X_STATUS register, pcix_get_max_mmrbc() is returning an incorrect
value, which is based on:

	(stat & PCI_X_STATUS_MAX_READ) >> 12

Valid return values are 512, 1024, 2048, 4096, which correspond to a 'stat'
(masked and right shifted by 21) of 0, 1, 2, 3, respectively.

A right shift by 11 would generate the correct return value when 'stat' (masked
and right shifted by 21) has a value of 1 or 2. But for a value of 0 or 3 it's
not possible to generate the correct return value by only right shifting.

Fix is based on pcix_get_mmrbc()'s similar dealings with the PCI_X_CMD register.

Cc: stable@kernel.org
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-19 12:36:51 -07:00
Thomas Weber 8839316121 Fix typos in comments
[Ss]ytem => [Ss]ystem
udpate => update
paramters => parameters
orginal => original

Signed-off-by: Thomas Weber <swirl@gmx.li>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 11:47:56 +01:00
FUJITA Tomonori 5f3cd1e0bb dma-mapping: pci: move pci_set_dma_mask and pci_set_consistent_dma_mask to pci-dma-compat.h
We can use pci-dma-compat.h to implement pci_set_dma_mask and
pci_set_consistent_dma_mask as we do with the other PCI DMA API.

We can remove HAVE_ARCH_PCI_SET_DMA_MASK too.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
FUJITA Tomonori 6a1961f49e dma-mapping: dma-mapping.h: add dma_set_coherent_mask
dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask.  This is
necessary to move to the generic device model DMA API from the PCI bus
specific API in the long term.

dma_set_coherent_mask works in the exact same way that
pci_set_consistent_dma_mask does.  So this patch also changes
pci_set_consistent_dma_mask to call dma_set_coherent_mask.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
FUJITA Tomonori e3c4bccaba dma-mapping: pci: convert pci_set_dma_mask to call dma_set_mask
This changes pci_set_dma_mask to call the generic DMA API, dma_set_mask.

pci_set_dma_mask (in drivers/pci/pci.c) does the same things that
dma_set_mask does on all the architectures that use pci_set_dma_mask;
calls dma_supprted and sets dev->dma_mask.  So we safely change
pci_set_dma_mask to simply call dma_set_mask.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
Linus Torvalds 522dba7134 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM Runtime: Make runtime PM of PCI devices inactive by default
2010-03-08 16:10:29 -08:00