Commit Graph

72 Commits

Author SHA1 Message Date
Rafael J. Wysocki 78d090b0be PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
The result returned by acpi_dev_run_wake() is always either -EINVAL
or -ENODEV, while obviously it should return 0 on success.  The
problem is that the leftover error variable, that's not really used
in the function, is initialized with -ENODEV and then returned
without modification.

To fix this issue remove the error variable from acpi_dev_run_wake()
and make the function return 0 on success as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14 09:05:32 -07:00
Rafael J. Wysocki 379021d5c0 PCI / PM: Extend PME polling to all PCI devices
The land of PCI power management is a land of sorrow and ugliness,
especially in the area of signaling events by devices.  There are
devices that set their PME Status bits, but don't really bother
to send a PME message or assert PME#.  There are hardware vendors
who don't connect PME# lines to the system core logic (they know
who they are).  There are PCI Express Root Ports that don't bother
to trigger interrupts when they receive PME messages from the devices
below.  There are ACPI BIOSes that forget to provide _PRW methods for
devices capable of signaling wakeup.  Finally, there are BIOSes that
do provide _PRW methods for such devices, but then don't bother to
call Notify() for those devices from the corresponding _Lxx/_Exx
GPE-handling methods.  In all of these cases the kernel doesn't have
a chance to receive a proper notification that it should wake up a
device, so devices stay in low-power states forever.  Worse yet, in
some cases they continuously send PME Messages that are silently
ignored, because the kernel simply doesn't know that it should clear
the device's PME Status bit.

This problem was first observed for "parallel" (non-Express) PCI
devices on add-on cards and Matthew Garrett addressed it by adding
code that polls PME Status bits of such devices, if they are enabled
to signal PME, to the kernel.  Recently, however, it has turned out
that PCI Express devices are also affected by this issue and that it
is not limited to add-on devices, so it seems necessary to extend
the PME polling to all PCI devices, including PCI Express and planar
ones.  Still, it would be wasteful to poll the PME Status bits of
devices that are known to receive proper PME notifications, so make
the kernel (1) poll the PME Status bits of all PCI and PCIe devices
enabled to signal PME and (2) disable the PME Status polling for
devices for which correct PME notifications are received.

Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14 09:05:31 -07:00
Lin Ming 28c2103dad ACPI: Add D3 cold state
_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3.  If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.

Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-29 02:21:08 -04:00
Rafael J. Wysocki 5190726765 ACPI: Remove the wakeup.run_wake_count device field
The wakeup.run_wake_count ACPI device field is only used by the PCI
runtime PM code to "protect" devices from being prepared for
generating wakeup signals more than once in a row.  However, it
really doesn't provide any protection, because (1) all of the
functions it is supposed to protect use their own reference counters
effectively ensuring that the device will be set up for generating
wakeup signals just once and (2) the PCI runtime PM code uses
wakeup.run_wake_count in a racy way, since nothing prevents
acpi_dev_run_wake() from being called concurrently from two different
threads for the same device.

Remove the wakeup.run_wake_count ACPI device field which is
unnecessary, confusing and used in a wrong way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:53 +01:00
Rafael J. Wysocki 0f953bf6b4 PCI/PM: Report wakeup events before resuming devices
Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Matthew Garrett 2f671e2dbf PCI: Disable ASPM if BIOS asks us to
We currently refuse to touch the ASPM registers if the BIOS tells us that
ASPM isn't supported. This can cause problems if the BIOS has (for any
reason) enabled ASPM on some devices anyway. Change the code such that we
explicitly clear ASPM if the FADT indicates that ASPM isn't supported,
and make sure we tidy up appropriately on device removal in order to deal
with the hotplug case. If ASPM is disabled because the BIOS doesn't hand
over control then we won't touch the registers.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:08 -08:00
Linus Torvalds 9e50ab91d0 Merge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block()
  ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset
  ACPI / ACPICA: Do not execute _PRW methods during initialization
  ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()
  ACPICA: Update version to 20100702
  ACPICA: Fix for Alias references within Package objects
  ACPICA: Fix lint warning for 64-bit constant
  ACPICA: Remove obsolete GPE function
  ACPICA: Update debug output components
  ACPICA: Add support for WDDT - Watchdog Descriptor Table
  ACPICA: Drop acpi_set_gpe
  ACPICA: Use low-level GPE enable during GPE block initialization
  ACPI / EC: Do not use acpi_set_gpe
  ACPI / EC: Drop suspend and resume routines
  ACPICA: Remove wakeup GPE reference counting which is not used
  ACPICA: Introduce acpi_gpe_wakeup()
  ACPICA: Rename acpi_hw_gpe_register_bit
  ACPICA: Update version to 20100528
  ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT
  ACPICA: Optimization: Reduce the number of namespace walks
  ...
2010-08-07 17:08:30 -07:00
Rafael J. Wysocki c125e96f04 PM: Make it possible to avoid races between wakeup and system sleep
One of the arguments during the suspend blockers discussion was that
the mainline kernel didn't contain any mechanisms making it possible
to avoid races between wakeup and system suspend.

Generally, there are two problems in that area.  First, if a wakeup
event occurs exactly when /sys/power/state is being written to, it
may be delivered to user space right before the freezer kicks in, so
the user space consumer of the event may not be able to process it
before the system is suspended.  Second, if a wakeup event occurs
after user space has been frozen, it is not generally guaranteed that
the ongoing transition of the system into a sleep state will be
aborted.

To address these issues introduce a new global sysfs attribute,
/sys/power/wakeup_count, associated with a running counter of wakeup
events and three helper functions, pm_stay_awake(), pm_relax(), and
pm_wakeup_event(), that may be used by kernel subsystems to control
the behavior of this attribute and to request the PM core to abort
system transitions into a sleep state already in progress.

The /sys/power/wakeup_count file may be read from or written to by
user space.  Reads will always succeed (unless interrupted by a
signal) and return the current value of the wakeup events counter.
Writes, however, will only succeed if the written number is equal to
the current value of the wakeup events counter.  If a write is
successful, it will cause the kernel to save the current value of the
wakeup events counter and to abort the subsequent system transition
into a sleep state if any wakeup events are reported after the write
has returned.

[The assumption is that before writing to /sys/power/state user space
will first read from /sys/power/wakeup_count.  Next, user space
consumers of wakeup events will have a chance to acknowledge or
veto the upcoming system transition to a sleep state.  Finally, if
the transition is allowed to proceed, /sys/power/wakeup_count will
be written to and if that succeeds, /sys/power/state will be written
to as well.  Still, if any wakeup events are reported to the PM core
by kernel subsystems after that point, the transition will be
aborted.]

Additionally, put a wakeup events counter into struct dev_pm_info and
make these per-device wakeup event counters available via sysfs,
so that it's possible to check the activity of various wakeup event
sources within the kernel.

To illustrate how subsystems can use pm_wakeup_event(), make the
low-level PCI runtime PM wakeup-handling code use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-19 01:58:48 +02:00
Rafael J. Wysocki a44061aa8b ACPICA: Remove wakeup GPE reference counting which is not used
After the previous patch that introduced acpi_gpe_wakeup() and
modified the ACPI suspend and wakeup code to use it, the third
argument of acpi_{enable|disable}_gpe() and the GPE wakeup
reference counter are not necessary any more.  Remove them and
modify all of the users of acpi_{enable|disable}_gpe()
accordingly.  Also drop GPE type constants that aren't used
any more.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-06 22:34:26 -04:00
Linus Torvalds bc53515413 Merge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: replace acpi_integer by u64
  ACPICA: Update version to 20100121.
  ACPICA: Remove unused uint32_struct type
  ACPICA: Disassembler: Remove obsolete "Integer64" field in parse object
  ACPICA: Remove obsolete ACPI_INTEGER (acpi_integer) type
  ACPICA: Predefined name repair: fix NULL package elements
  ACPICA: AcpiGetDevices: Eliminate unnecessary _STA calls
  ACPICA: Update all ACPICA copyrights and signons to 2010
  ACPICA: Update for new gcc-4 warning options
2010-03-01 10:36:22 -08:00
Rafael J. Wysocki b67ea76172 PCI / ACPI / PM: Platform support for PCI PME wake-up
Although the majority of PCI devices can generate PMEs that in
principle may be used to wake up devices suspended at run time,
platform support is generally necessary to convert PMEs into wake-up
events that can be delivered to the kernel.  If ACPI is used for this
purpose, PME signals generated by a PCI device will trigger the ACPI
GPE associated with the device to generate an ACPI wake-up event that
we can set up a handler for, provided that everything is configured
correctly.

Unfortunately, the subset of PCI devices that have GPEs associated
with them is quite limited.  The devices without dedicated GPEs have
to rely on the GPEs associated with other devices (in the majority of
cases their upstream bridges and, possibly, the root bridge) to
generate ACPI wake-up events in response to PME signals from them.

Add ACPI platform support for PCI PME wake-up:
o Add a framework making is possible to use ACPI system notify
  handlers for run-time PM.
o Add new PCI platform callback ->run_wake() to struct
  pci_platform_pm_ops allowing us to enable/disable the platform to
  generate wake-up events for given device.  Implemet this callback
  for the ACPI platform.
o Define ACPI wake-up handlers for PCI devices and PCI root buses and
  make the PCI-ACPI binding code register wake-up notifiers for all
  PCI devices present in the ACPI tables.
o Add function pci_dev_run_wake() which can be used by PCI drivers to
  check if given device is capable of generating wake-up events at
  run time.

Developed in cooperation with Matthew Garrett <mjg@redhat.com>.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:21:02 -08:00
Lin Ming 439913fffd ACPI: replace acpi_integer by u64
acpi_integer is now obsolete and removed from the ACPICA code base,
replaced by u64.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-28 01:47:33 -05:00
Rafael J. Wysocki dc1a94ae17 PCI/PM: Propagate wake-up enable for PCIe devices too
Having read the PM part of the PCIe 2.0 specification more carefully
I think that it was a mistake to restrict the wake-up enable
propagation to non-PCIe devices, because if we do not request
control of the root ports' PME registers via OSC, PCIe PME is
supposed to be handled by the platform, just like the non-PCIe PME.
Even if we do that, the wake-up propagation is done to allow the
devices to wake up the system from sleep states which involves the
platform anyway, so it won't hurt.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16 13:37:49 -08:00
Kenji Kaneshige 5f4d91a122 PCI: use pci_is_pcie() in pci core
Change for PCI core to use pci_is_pcie() instead of checking
pci_dev->is_pcie.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:16 -08:00
Rafael J. Wysocki 0baed8da1e PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
Some PCI devices (not PCI Express), like PCI add-on cards, can
generate PME#, but they don't have any special platform wake-up
support.  For this reason, even if they generate PME# to wake up the
system from a sleep state, wake-up events are not generated by the
platform.

It turns out that, at least on some systems, PCI bridges and the PCI
host bridge have ACPI GPEs associated with them that, if enabled to
generate wake-up events, allow the system to wake up if one of the
add-on devices asserts PME# while the system is in a sleep state.
Following this observation, if a PCI device without direct ACPI
wake-up support is prepared to wake up the system during a transition
into a sleep state (eg. suspend to RAM), try to configure the bridges
on the path from the device to the root bridge to wake-up the system.

Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:19:24 -07:00
Rafael J. Wysocki df8db91fc3 PCI / ACPI PM: Rework some debug messages
Move a debug message from acpi_pci_sleep_wake() to
acpi_pm_device_sleep_wake() and use the standard dev_*() macros
in there.

Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:19:06 -07:00
Rafael J. Wysocki 5bcc2fb4e8 PCI PM: Simplify PCI wake-up code
Rework the PCI wake-up code so that it's easier to read without
changing the functionality.

Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:19:00 -07:00
Len Brown 478c6a43fc Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:14:15 -04:00
Bob Moore 993958feca ACPICA: Update FADT flag definitions
Add new flags in the Boot Architecture flags field. Update comments
for all FADT flags. Add FADT version when each flag was defined.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-26 16:38:21 -04:00
Kenji Kaneshige 63f10f0f6d PCI/ACPI: move _OSC code to pci_root.c
Move PCI _OSC management code from drivers/pci/pci-acpi.c to
drivers/acpi/pci_root.c. The benefits are

- We no longer need struct osc_data and its management code (contents
  are moved to struct acpi_pci_root). This simplify the code, and we
  no longer care about kmalloc() failure.

- We can make pci_acpi_osc_support() be a static function, which is
  called only from drivers/acpi/pci_root.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:32 -07:00
Len Brown b2576e1d44 Merge branch 'linus' into release 2009-01-09 03:39:43 -05:00
Taku Izumi 86d8698027 pci-acpi: Cleanup _OSC evaluation code
Cleanup _OSC evaluation code.  Some whitespace changes and a few other
minor cleanups.

Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:35 -08:00
Taku Izumi e0fa3b43df PCI/ACPI: Remove unnecessary _OSC evaluation for control request
If a control had already been granted, we don't need to re-evaluate
_OSC for it because firmware may not reject control of any feature it
has previously granted control to.

Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:35 -08:00
Taku Izumi 753e3aca73 PCI: revert additional _OSC evaluation
Reverts adf411b819.

The commit adf411b819 was based on the
improper assumption that queried result was not updated when _OSC
support field was changed. But, in fact, queried result is updated
whenever _OSC support field was changed through __acpi_query_osc().
As a result, the commit adf411b819 only
introduced unnecessary additional _OSC evaluation...

Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:34 -08:00
Andrew Patterson 2361694191 ACPI/PCI: remove obsolete _OSC capability support functions
The acpi_query_osc, __pci_osc_support_set, pci_osc_support_set, and
pcie_osc_support_set functions have been obsoleted in favor of setting
these capabilities during root bridge discovery with
pci_acpi_osc_support.  There are no longer any callers of these
functions, so remove them.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:32 -08:00
Andrew Patterson 990a7ac564 ACPI/PCI: call _OSC support during root bridge discovery
Add pci_acpi_osc_support() and call it when a PCI bridge is added.  This
allows us to avoid having every individual PCI root bridge driver call
_OSC support for every root bridge in their probe functions, a
significant savings in boot time.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:27 -08:00
Kay Sievers 1a9271331a PCI: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:23 -08:00
Lin Ming ea7e96e0f2 ACPI: remove private acpica headers from driver files
External driver files should not include any private acpica headers.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31 01:15:22 -05:00
Kenji Kaneshige 2485b8674b PCI: ignore bit0 of _OSC return code
Currently acpi_run_osc() checks all the bits in _OSC result code (the
first DWORD in the capabilities buffer) to see error condition. But the
bit 0, which doesn't indicate any error, must be ignored.

The bit 0 is used as the query flag at _OSC invocation time. Some
platforms clear it during _OSC evaluation, but the others don't. On
latter platforms, current acpi_run_osc() mis-detects error when _OSC is
evaluated with query flag set because it doesn't ignore the bit 0.
Because of this, the __acpi_query_osc() always fails on such platforms.

And this is the cause of the problem that pci_osc_control_set() doesn't
work since the commit 4e39432f4d which
changed pci_osc_control_set() to use __acpi_query_osc().

Tested-by:"Tomasz Czernecki <czernecki@gmail.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-11 13:33:05 -08:00
Rafael J. Wysocki f8123381ba ACPI: Oops in ACPI with git latest
ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926]
ACPI Warning (nspredef-0252): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, expected 4 [20080926]
ACPI Error (nspredef-0163): \_SB_.PCI0._OSC: Missing expected return value [20080926]
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<c0237671>] acpi_run_osc+0xa1/0x170

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-25 04:07:14 -04:00
Taku Izumi ab20440c37 ACPI/PCI: Fix return value of acpi_cuery_osc()
If acpi_query_osc() returns other than AE_OK, __pci_osc_support_set()
stops scanning ACPI objects to evaluate _OSC. This prevents subsequent
_OSCs from being evaluated if some of root bridge doesn't have _OSC, for
example. So acpi_query_osc() should return always AE_OK to evaluate all
_OSC.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:34 -07:00
Taku Izumi adf411b819 ACPI/PCI: Always query _OSC control field in pci_osc_control_set()
In current pci_osc_control_set() implementation, once the _OSC control
field is queried, it is never queried again. But the query result can
change depending on the _OSC support field. For example, if PCI Express
Native Hot Plug control depends on ASPM support on a certain platform, a
PCI Express Native Hot Plug Control query would fail before the ASPM
driver was loaded, but it would succeed if the ASPM driver was loaded
first.  Therefore, pci_osc_control_set() should query the _OSC control
field every time.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:34 -07:00
Taku Izumi 4e39432f4d ACPI/PCI: Change pci_osc_control_set() to query control bits first
Current pci_osc_control_set() evaluates _OSC without query for control
bits, unless __pci_osc_support_set() is called beforehand. But as
strongly recommended in PCI firmware specification, it should query
control bits first.

This patch changes pci_osc_control_set() to query control bits first
even if __pci_osc_support_set() is not called beforehand.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:33 -07:00
Taku Izumi 9778c14b4c ACPI/PCI: Fix possible race condition on _OSC evaluation
Fix possible race condition on _OSC evaluation.

Current _OSC evaluation code has possible race condition because it
maniputes osc_data linked list or its contents without any lock
mechanism.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:33 -07:00
Shaohua Li 5fde244d39 PCI: disable ASPM per ACPI FADT setting
The ACPI FADT table includes an ASPM control bit. If the bit is set, do
not enable ASPM since it may indicate that the platform doesn't actually
support the feature.

Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 14:56:09 -07:00
Rafael J. Wysocki eb9d0fe40e PCI ACPI: Rework PCI handling of wake-up
* Introduce function acpi_pm_device_sleep_wake() for enabling and
  disabling the system wake-up capability of devices that are power
  manageable by ACPI.

* Introduce function acpi_bus_can_wakeup() allowing other (dependent)
  subsystems to check if ACPI is able to enable the system wake-up
  capability of given device.

* Introduce callback .sleep_wake() in struct pci_platform_pm_ops and
  for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake().

* Introduce callback .can_wakeup() in struct pci_platform_pm_ops and
  for the ACPI 'driver' make it use acpi_bus_can_wakeup().

* Move the PME# handlig code out of pci_enable_wake() and split it
  into two functions, pci_pme_capable() and pci_pme_active(),
  allowing the caller to check if given device is capable of
  generating PME# from given power state and to enable/disable the
  device's PME# functionality, respectively.

* Modify pci_enable_wake() to use the new ACPI callbacks and the new
  PME#-related functions.

* Drop the generic .platform_enable_wakeup() callback that is not
  used any more.

* Introduce device_set_wakeup_capable() that will set the
  power.can_wakeup flag of given device.

* Rework PCI device PM initialization so that, if given device is
  capable of generating wake-up events, either natively through the
  PME# mechanism, or with the help of the platform, its
  power.can_wakeup flag is set and its power.should_wakeup flag is
  unset as appropriate.

* Make ACPI set the power.can_wakeup flag for devices found to be
  wake-up capable by it.

* Make the ACPI wake-up code enable/disable GPEs for devices that
  have the wakeup.flags.prepared flag set (which means that their
  wake-up power has been enabled).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:26:28 -07:00
Rafael J. Wysocki 44e4e66eea PCI: rework pci_set_power_state function to call platform first
Rework pci_set_power_state() so that the platform callback is
invoked before the native mechanism, if necessary.  Also, make
the function check if the device is power manageable by the
platform before invoking the platform callback.

This may matter if the device dependent on additional power
resources controlled by the platform is being put into D0, in which
case those power resources must be turned on before we attempt to
handle the device itself.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:25:43 -07:00
Rafael J. Wysocki 961d9120fa PCI: Introduce platform_pci_power_manageable function
Introduce function pointer platform_pci_power_manageable to be used
by the platform-related code to point to a function allowing us to
check if given device is power manageable by the platform.

Introduce acpi_pci_power_manageable() playing that role for ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:25:10 -07:00
Jesse Barnes 53eb2fbeb9 Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next 2008-06-12 12:06:58 -07:00
Rafael J. Wysocki 8d2bdf4948 PCI ACPI: Drop the second argument of platform_pci_choose_state
Since the second argument of acpi_pci_choose_state() and
platform_pci_choose_state() is never used, remove it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11 19:33:19 -04:00
David Brownell 06166780eb ACPI PM: acpi_pm_device_sleep_state() cleanup
Get rid of a superfluous acpi_pm_device_sleep_state() parameter.  The
only legitimate value of that parameter must be derived from the first
parameter, which is what all the callers already do.  (However, this
does not address the fact that ACPI still doesn't set up those flags.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11 19:33:19 -04:00
Kenji Kaneshige 90a57dab6a pci-acpi: formatting cleanups for _OSC
Minor cleanup in pci-acpi.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:49 -07:00
Kenji Kaneshige c155062d6e pci-acpi: remove unused variable in __pci_osc_support_set
The 'retval' variable in __pci_osc_support_set() is no longer
used. Remove this unused variable.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:48 -07:00
Kenji Kaneshige 681f7d9db5 pci-acpi: add flag to indicate query had been done
Current pci-acpi implementation checks osc_data->support_stat to see
if control bits had been already queried. It is not good from the
viewpoint of easy understanding. So this patch adds new 'is_queried'
flag to indicate query had been done.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:48 -07:00
Kenji Kaneshige 5e0b994745 pci-acpi: use local buffer for _OSC
Current pci-acpi implementation uses array in osc_data directly to
evaluate _OSC. It needs to save the old data and restore it if _OSC
evaluation fails. To make it more robust, we should use local array to
evaluate _OSC.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:48 -07:00
Kenji Kaneshige 8a7a4faf96 pci-acpi: remove duplicate code for _OSC
Remove the duplicated code in acpi_query_osc() and acpi_run_osc().
It simplifies the code very much.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:47 -07:00
Kenji Kaneshige c4e5fadd2a ACPI/PCI: another multiple _OSC memory leak fix
The acpi_query_osc() function can be called for the ACPI object that
doesn't have _OSC method. In this case, acpi_get_osc_data() would
allocate a useless memory region. To avoid this, we need to check the
existence of _OSC before calling acpi_get_osc_data() in acpi_query_osc().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13 09:51:54 -07:00
Kenji Kaneshige 34a65055e5 ACPI/PCI: handle multiple _OSC
The pci_osc_control_set() function can be called for the ACPI object
that doesn't have _OSC method. In this case, acpi_get_osc_data() would
allocate a useless memory region. To avoid this, we need to check the
existence of _OSC before calling acpi_get_osc_data(). Here is a patch
to fix this problem in pci_osc_control_set.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13 09:51:54 -07:00
Shaohua Li a5d1c87983 ACPI/PCI: handle multiple _OSC
There is an IA64 system here which have two pci root bridges with _OSC.
One _OSC disables SHPC control bit but the other not. Below patch makes
_OSC data per-device instead of one global, otherwise linux takes both
root bridges don't support SHPC.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13 09:51:53 -07:00
Kenji Kaneshige 21e2b0a5ef PCI ACPI: fix uninitialized variable in __pci_osc_support_set
Fix uninitialized variable in __pci_osc_support_set().

If the ACPI namespace doesn't have any device object corresponding to
the specified hid, 'retval' in __pci_osc_support_set() is not changed
by the acpi_query_osc() callback. Since 'retval' is not initizlized in
the current implementation, the contents of 'retval' is undefined in
this case. This causes a mis-handling of ctrlset_buf[OSC_SUPPORT_TYPE]
and will cause an unexpected result in the subsequent
pci_osc_control_set() call as a result.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13 09:51:53 -07:00