Commit Graph

81 Commits

Author SHA1 Message Date
Eryu Guan f2a44523b2 jbd2: Unify log messages in jbd2 code
Some jbd2 code prints out kernel messages with "JBD2: " prefix, at the
same time other jbd2 code prints with "JBD: " prefix. Unify the prefix
to "JBD2: ".

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 19:09:18 -04:00
Jan Kara de1b794130 jbd2: Fix oops in jbd2_journal_remove_journal_head()
jbd2_journal_remove_journal_head() can oops when trying to access
journal_head returned by bh2jh(). This is caused for example by the
following race:

	TASK1					TASK2
  jbd2_journal_commit_transaction()
    ...
    processing t_forget list
      __jbd2_journal_refile_buffer(jh);
      if (!jh->b_transaction) {
        jbd_unlock_bh_state(bh);
					jbd2_journal_try_to_free_buffers()
					  jbd2_journal_grab_journal_head(bh)
					  jbd_lock_bh_state(bh)
					  __journal_try_to_free_buffer()
					  jbd2_journal_put_journal_head(jh)
        jbd2_journal_remove_journal_head(bh);

jbd2_journal_put_journal_head() in TASK2 sees that b_jcount == 0 and
buffer is not part of any transaction and thus frees journal_head
before TASK1 gets to doing so. Note that even buffer_head can be
released by try_to_free_buffers() after
jbd2_journal_put_journal_head() which adds even larger opportunity for
oops (but I didn't see this happen in reality).

Fix the problem by making transactions hold their own journal_head
reference (in b_jcount). That way we don't have to remove journal_head
explicitely via jbd2_journal_remove_journal_head() and instead just
remove journal_head when b_jcount drops to zero. The result of this is
that [__]jbd2_journal_refile_buffer(),
[__]jbd2_journal_unfile_buffer(), and
__jdb2_journal_remove_checkpoint() can free journal_head which needs
modification of a few callers. Also we have to be careful because once
journal_head is removed, buffer_head might be freed as well. So we
have to get our own buffer_head reference where it matters.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-13 15:38:22 -04:00
Linus Torvalds 35806b4f7c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
  jbd2: Add MAINTAINERS entry
  jbd2: fix a potential leak of a journal_head on an error path
  ext4: teach ext4_ext_split to calculate extents efficiently
  ext4: Convert ext4 to new truncate calling convention
  ext4: do not normalize block requests from fallocate()
  ext4: enable "punch hole" functionality
  ext4: add "punch hole" flag to ext4_map_blocks()
  ext4: punch out extents
  ext4: add new function ext4_block_zero_page_range()
  ext4: add flag to ext4_has_free_blocks
  ext4: reserve inodes and feature code for 'quota' feature
  ext4: add support for multiple mount protection
  ext4: ensure f_bfree returned by ext4_statfs() is non-negative
  ext4: protect bb_first_free in ext4_trim_all_free() with group lock
  ext4: only load buddy bitmap in ext4_trim_fs() when it is needed
  jbd2: Fix comment to match the code in jbd2__journal_start()
  ext4: fix waiting and sending of a barrier in ext4_sync_file()
  jbd2: Add function jbd2_trans_will_send_data_barrier()
  jbd2: fix sending of data flush on journal commit
  ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly
  ...
2011-05-26 09:53:20 -07:00
Jan Kara bbd2be3691 jbd2: Add function jbd2_trans_will_send_data_barrier()
Provide a function which returns whether a transaction with given tid
will send a flush to the filesystem device.  The function will be used
by ext4 to detect whether fsync needs to send a separate flush or not.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 11:59:18 -04:00
Jan Kara 81be12c817 jbd2: fix sending of data flush on journal commit
In data=ordered mode, it's theoretically possible (however rare) that
an inode is filed to transaction's t_inode_list and a flusher thread
writes all the data and inode is reclaimed before the transaction
starts to commit.  In such a case, we could erroneously omit sending a
flush to file system device when it is different from the journal
device (because data can still be in disk cache only).

Fix the problem by setting a flag in a transaction when some inode is added
to it and then send disk flush in the commit code when the flag is set.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 11:52:40 -04:00
Tao Ma 9199e66528 jbd/jbd2: remove obsolete summarise_journal_usage.
summarise_journal_usage seems to be obsolete for a long time,
so remove it.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17 13:47:42 +02:00
Jan Kara 229309caeb jbd2: Fix forever sleeping process in do_get_write_access()
In do_get_write_access() we wait on BH_Unshadow bit for buffer to get
from shadow state. The waking code in journal_commit_transaction() has
a bug because it does not issue a memory barrier after the buffer is
moved from the shadow state and before wake_up_bit() is called. Thus a
waitqueue check can happen before the buffer is actually moved from
the shadow state and waiting process may never be woken. Fix the
problem by issuing proper barrier.

Reported-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-08 19:09:53 -04:00
Linus Torvalds a97b52022a Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix data corruption regression by reverting commit 6de9843dab
  ext4: Allow indirect-block file to grow the file size to max file size
  ext4: allow an active handle to be started when freezing
  ext4: sync the directory inode in ext4_sync_parent()
  ext4: init timer earlier to avoid a kernel panic in __save_error_info
  jbd2: fix potential memory leak on transaction commit
  ext4: fix a double free in ext4_register_li_request
  ext4: fix credits computing for indirect mapped files
  ext4: remove unnecessary [cm]time update of quota file
  jbd2: move bdget out of critical section
2011-04-11 15:45:47 -07:00
Zhang Huan 6cba611e60 jbd2: fix potential memory leak on transaction commit
There is potential memory leak of journal head in function
jbd2_journal_commit_transaction. The problem is that JBD2 will not
reclaim the journal head of commit record if error occurs or journal
is abotred.

I use the following script to reproduce this issue, on a RHEL6
system. I found it very easy to reproduce with async commit enabled.

mount /dev/sdb /mnt -o journal_checksum,journal_async_commit
touch /mnt/xxx
echo offline > /sys/block/sdb/device/state
sync
umount /mnt
rmmod ext4
rmmod jbd2

Removal of the jbd2 module will make slab complaining that
"cache `jbd2_journal_head': can't free all objects".

Signed-off-by: Zhang Huan <zhhuan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-05 19:16:20 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jens Axboe 82f04ab47e jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
'write_op' was still used, even though it was always WRITE_SYNC now.
Add plugging around the cases where it submits IO, and flush them
before we end up waiting for that IO.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 11:01:52 +01:00
Jens Axboe 721a9602e6 block: kill off REQ_UNPLUG
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00
Theodore Ts'o a107e5a3a4 Merge branch 'next' into upstream-merge
Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h
2010-10-27 23:44:47 -04:00
Brian King 39e3ac2599 jbd2: Fix I/O hang in jbd2_journal_release_jbd_inode
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:25:12 -04:00
Linus Torvalds a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Corrado Zoccolo 749ef9f842 cfq: improve fsync performance for small files
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.

Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.

This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
  flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
  tree.

Having the queue associated to the fsync-ing process and the one associated
 to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
  after the noidle tree expires its slice.

Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-20 15:24:50 +02:00
Christoph Hellwig dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Christoph Hellwig 9c35575bbe jbd2: replace barriers with explicit flush / FUA usage
Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the
EOPNOTSUPP detection for barriers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:39 +02:00
Jan Kara f73bee4985 jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
Currently JBD2 relies blkdev_issue_flush() draining the queue when ASYNC_COMMIT
feature is set. This property is going away so make JBD2 wait for buffers it
needs on its own before submitting the cache flush.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:39 +02:00
Christoph Hellwig 87e99511ea kill BH_Ordered flag
Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 01:09:00 -04:00
Theodore Ts'o 8dd420466c jbd2: Remove t_handle_lock from start_this_handle()
This should remove the last exclusive lock from start_this_handle(),
so that we should now be able to start multiple transactions at the
same time on large SMP systems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-03 21:38:29 -04:00
Theodore Ts'o a931da6ac9 jbd2: Change j_state_lock to be a rwlock_t
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores.  So
change it to be a read/write spinlock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-03 21:35:12 -04:00
Theodore Ts'o a51dca9cd3 jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
By using an atomic_t for t_updates and t_outstanding credits, this
should allow us to not need to take transaction t_handle_lock in
jbd2_journal_stop().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-02 08:43:25 -04:00
Eric Sandeen cc937db74b jbd2: Make barrier messages less scary
Saying things like "sync failed" when a device does
not support barriers makes users slightly more worried than
they need to be; rather than talking about sync failures,
let's just state the barrier-based facts.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27 11:56:08 -04:00
Dmitry Monakhov fbd9b09a17 blkdev: generalize flags for blkdev_issue_fn functions
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
dingdinghua 23e2af3518 jbd2: clean up an assertion in jbd2_journal_commit_transaction()
commit_transaction has the same value as journal->j_running_transaction,
so we can simplify the assert statement.

Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-24 12:11:20 -05:00
dingdinghua ba869023ea jbd2: delay discarding buffers in journal_unmap_buffer
Delay discarding buffers in journal_unmap_buffer until
we know that "add to orphan" operation has definitely been
committed, otherwise the log space of committing transation
may be freed and reused before truncate get committed, updates
may get lost if crash happens.

Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-15 16:35:42 -05:00
Theodore Ts'o cc3e1bea5d ext4, jbd2: Add barriers for file systems with exernal journals
This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk.  We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.

We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk.  Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.

Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23 06:52:08 -05:00
Linus Torvalds 3126c136bc Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
  ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
  ext3: Fix data / filesystem corruption when write fails to copy data
  ext4: Support for 64-bit quota format
  ext3: Support for vfsv1 quota format
  quota: Implement quota format with 64-bit space and inode limits
  quota: Move definition of QFMT_OCFS2 to linux/quota.h
  ext2: fix comment in ext2_find_entry about return values
  ext3: Unify log messages in ext3
  ext2: clear uptodate flag on super block I/O error
  ext2: Unify log messages in ext2
  ext3: make "norecovery" an alias for "noload"
  ext3: Don't update the superblock in ext3_statfs()
  ext3: journal all modifications in ext3_xattr_set_handle
  ext2: Explicitly assign values to on-disk enum of filetypes
  quota: Fix WARN_ON in lookup_one_len
  const: struct quota_format_ops
  ubifs: remove manual O_SYNC handling
  afs: remove manual O_SYNC handling
  kill wait_on_page_writeback_range
  vfs: Implement proper O_SYNC semantics
  ...
2009-12-11 15:31:13 -08:00
Christoph Hellwig 94004ed726 kill wait_on_page_writeback_range
All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:50 +01:00
Theodore Ts'o e6ec116b67 jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
OOM happens.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-01 09:04:42 -05:00
Theodore Ts'o bf6993276f jbd2: Use tracepoints for history file
The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure.  We
save memory as a bonus.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-30 00:32:06 -04:00
Theodore Ts'o 0e3d2a6313 ext4: Fix async commit mode to be safe by using a barrier
Previously the journal_async_commit mount option was equivalent to
using barrier=0 (and just as unsafe).  This patch fixes it so that we
eliminate the barrier before the commit block (by not using ordered
mode), and explicitly issuing an empty barrier bio after writing the
commit block.  Because of the journal checksum, it is safe to do this;
if the journal blocks are not all written before a power failure, the
checksum in the commit block will prevent the last transaction from
being replayed.

Using the fs_mark benchmark, using journal_async_commit shows a 50%
improvement:

FSUse%        Count         Size    Files/sec     App Overhead
     8         1000        10240         30.5            28242

vs.

FSUse%        Count         Size    Files/sec     App Overhead
     8         1000        10240         45.8            28620


Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-11 09:30:12 -04:00
Jens Axboe 1fe06ad892 writeback: get rid of wbc->for_writepages
It's only set, it's never checked. Kill it.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:16:18 +02:00
Theodore Ts'o 879c5e6b7c jbd2: convert instrumentation from markers to tracepoints
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 11:47:48 -04:00
Theodore Ts'o 67c457a8c3 jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-04-14 07:50:56 -04:00
Jens Axboe 4194b1eaf1 jbd2: use WRITE_SYNC_PLUG instead of WRITE_SYNC
When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Theodore Ts'o 7058548cd5 ext4: Use WRITE_SYNC for commits which are caused by fsync()
If a commit is triggered by fsync(), set a flag indicating the journal
blocks associated with the transaction should be flushed out using
WRITE_SYNC.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-25 23:35:46 -04:00
Linus Torvalds 2150edc6c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...
2009-01-08 17:14:59 -08:00
Joel Becker e06c8227fd jbd2: Add buffer triggers
Filesystems often to do compute intensive operation on some
metadata.  If this operation is repeated many times, it can be very
expensive.  It would be much nicer if the operation could be performed
once before a buffer goes to disk.

This adds triggers to jbd2 buffer heads.  Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer.  If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.

ocfs2 will use this feature.

Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion.  It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t).  So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.

There is only one trigger set allowed per buffer.  I can't think of any
reason to attach more than one set.  Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.

The trigger sets are considered static allocation from the jbd2
perspective.  ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:30 -08:00
Theodore Ts'o 40a1984d22 jbd2: Submit writes to the journal using WRITE_SYNC
Since we will be waiting the write of the commit record to the journal
to complete in journal_submit_commit_record(), submit it using
WRITE_SYNC.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-04 19:55:57 -05:00
Aneesh Kumar K.V fb68407b0d jbd2: Call journal commit callback without holding j_list_lock
Avoid freeing the transaction in __jbd2_journal_drop_transaction() so
the journal commit callback can run without holding j_list_lock, to
avoid lock contention on this spinlock.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-06 17:50:21 -05:00
Josef Bacik e07f7183a4 jbd2: improve jbd2 fsync batching
This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running.  If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage.  With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time.  This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-26 01:14:26 -05:00
Theodore Ts'o fd98496f46 jbd2: Add barrier not supported test to journal_wait_on_commit_record
Xen doesn't report that barriers are not supported until buffer I/O is
reported as completed, instead of when the buffer I/O is submitted.
Add a check and a fallback codepath to journal_wait_on_commit_record()
to detect this case, so that attempts to mount ext4 filesystems on
LVM/devicemapper devices on Xen guests don't blow up with an "Aborting
journal on device XXX"; "Remounting filesystem read-only" error.

Thanks to Andreas Sundstrom for reporting this issue.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-01-05 21:34:13 -05:00
Theodore Ts'o 6c20ec8503 jbd2: Call the commit callback before the transaction could get dropped
The transaction can potentially get dropped if there are no buffers
that need to be written.  Make sure we call the commit callback before
potentially deciding to drop the transaction.  Also avoid
dereferencing the commit_transaction pointer in the marker for the
same reason.

This patch fixes the bug reported by Eric Paris at:
http://bugzilla.kernel.org/show_bug.cgi?id=11838

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Eric Paris <eparis@redhat.com>
2008-10-28 21:08:20 -04:00
Theodore Ts'o 3e624fc72f ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback
The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed.  Previously this was done via a polling mechanism
when blocks are allocated or freed.  A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16 20:00:24 -04:00
Hidehiro Kawai 5bf5683a33 ext4: add an option to control error handling on file data
If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently.  Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error.  It's scary for mission critical
systems.  On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable.  So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.

If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error.  If you mount it with data_err=ignore, it doesn't
abort, just call printk().  data_err=ignore is the default.

Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 22:12:43 -04:00
Hidehiro Kawai 7ad7445f60 jbd2: don't dirty original metadata buffer on abort
Currently, original metadata buffers are dirtied when they are
unfiled whether the journal has aborted or not.  Eventually these
buffers will be written-back to the filesystem by pdflush.  This
means some metadata buffers are written to the filesystem without
journaling if the journal aborts.  So if both journal abort and
system crash happen at the same time, the filesystem would become
inconsistent state.  Additionally, replaying journaled metadata
can overwrite the latest metadata on the filesystem partly.
Because, if the journal gets aborted, journaled metadata are
preserved and replayed during the next mount not to lose
uncheckpointed metadata.  This would also break the consistency
of the filesystem.

This patch prevents original metadata buffers from being dirtied
on abort by clearing BH_JBDDirty flag from those buffers.  Thus,
no metadata buffers are written to the filesystem without journaling.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 20:29:31 -04:00
Hidehiro Kawai 77e841de8a jbd2: abort when failed to log metadata buffers
If we failed to write metadata buffers to the journal space and
succeeded to write the commit record, stale data can be written
back to the filesystem as metadata in the recovery phase.

To avoid this, when we failed to write out metadata buffers,
abort the journal before writing the commit record.

We can also avoid this kind of corruption by using the journal
checksum feature because it can detect invalid metadata blocks in the
journal and avoid them from being replayed.  So we don't need to care
about asynchronous commit record writeout with a checksum.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-12 16:39:16 -04:00
Theodore Ts'o 45a90bfd90 jbd2: Fix buffer head leak when writing the commit block
Also make sure the buffer heads are marked clean before submitting bh
for writing.  The previous code was marking the buffer head dirty,
which would have forced an unneeded write (and seek) to the journal
for no good reason.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-06 12:04:02 -04:00