Commit Graph

198 Commits

Author SHA1 Message Date
Mimi Zohar 9c69898783 encrypted-keys: module build fixes
Encrypted keys are encrypted/decrypted using either a trusted or
user-defined key type, which is referred to as the 'master' key.
The master key may be of type trusted iff the trusted key is
builtin or both the trusted key and encrypted keys are built as
modules.  This patch resolves the build dependency problem.

- Use "masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS)" construct
to encapsulate the above logic. (Suggested by Dimtry Kasatkin.)
- Fixing the encrypted-keys Makefile, results in a module name change
from encrypted.ko to encrypted-keys.ko.
- Add module dependency for request_trusted_key() definition

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16 14:23:14 -05:00
Mimi Zohar f4a0d5abef encrypted-keys: fix error return code
Fix request_master_key() error return code.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16 14:23:13 -05:00
David Howells 9f35a33b8d KEYS: Fix a NULL pointer deref in the user-defined key type
Fix a NULL pointer deref in the user-defined key type whereby updating a
negative key into a fully instantiated key will cause an oops to occur
when the code attempts to free the non-existent old payload.

This results in an oops that looks something like the following:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff81085fa1>] __call_rcu+0x11/0x13e
  PGD 3391d067 PUD 3894a067 PMD 0
  Oops: 0002 [#1] SMP
  CPU 1
  Pid: 4354, comm: keyctl Not tainted 3.1.0-fsdevel+ #1140                  /DG965RY
  RIP: 0010:[<ffffffff81085fa1>]  [<ffffffff81085fa1>] __call_rcu+0x11/0x13e
  RSP: 0018:ffff88003d591df8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000006e
  RDX: ffffffff8161d0c0 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff88003d591e18 R08: 0000000000000000 R09: ffffffff8152fa6c
  R10: 0000000000000000 R11: 0000000000000300 R12: ffff88003b8f9538
  R13: ffffffff8161d0c0 R14: ffff88003b8f9d50 R15: ffff88003c69f908
  FS:  00007f97eb18c720(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000008 CR3: 000000003d47a000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process keyctl (pid: 4354, threadinfo ffff88003d590000, task ffff88003c78a040)
  Stack:
   ffff88003e0ffde0 ffff88003b8f9538 0000000000000001 ffff88003b8f9d50
   ffff88003d591e28 ffffffff810860f0 ffff88003d591e68 ffffffff8117bfea
   ffff88003d591e68 ffffffff00000000 ffff88003e0ffde1 ffff88003e0ffde0
  Call Trace:
   [<ffffffff810860f0>] call_rcu_sched+0x10/0x12
   [<ffffffff8117bfea>] user_update+0x8d/0xa2
   [<ffffffff8117723a>] key_create_or_update+0x236/0x270
   [<ffffffff811789b1>] sys_add_key+0x123/0x17e
   [<ffffffff813b84bb>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-15 22:32:38 -02:00
Andy Shevchenko 02473119bc security: follow rename pack_hex_byte() to hex_byte_pack()
There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:56 -07:00
Christopher Yeoh fcf634098c Cross Memory Attach
The basic idea behind cross memory attach is to allow MPI programs doing
intra-node communication to do a single copy of the message rather than a
double copy of the message via shared memory.

The following patch attempts to achieve this by allowing a destination
process, given an address and size from a source process, to copy memory
directly from the source process into its own address space via a system
call.  There is also a symmetrical ability to copy from the current
process's address space into a destination process's address space.

- Use of /proc/pid/mem has been considered, but there are issues with
  using it:
  - Does not allow for specifying iovecs for both src and dest, assuming
    preadv or pwritev was implemented either the area read from or
  written to would need to be contiguous.
  - Currently mem_read allows only processes who are currently
  ptrace'ing the target and are still able to ptrace the target to read
  from the target. This check could possibly be moved to the open call,
  but its not clear exactly what race this restriction is stopping
  (reason  appears to have been lost)
  - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix
  domain socket is a bit ugly from a userspace point of view,
  especially when you may have hundreds if not (eventually) thousands
  of processes  that all need to do this with each other
  - Doesn't allow for some future use of the interface we would like to
  consider adding in the future (see below)
  - Interestingly reading from /proc/pid/mem currently actually
  involves two copies! (But this could be fixed pretty easily)

As mentioned previously use of vmsplice instead was considered, but has
problems.  Since you need the reader and writer working co-operatively if
the pipe is not drained then you block.  Which requires some wrapping to
do non blocking on the send side or polling on the receive.  In all to all
communication it requires ordering otherwise you can deadlock.  And in the
example of many MPI tasks writing to one MPI task vmsplice serialises the
copying.

There are some cases of MPI collectives where even a single copy interface
does not get us the performance gain we could.  For example in an
MPI_Reduce rather than copy the data from the source we would like to
instead use it directly in a mathops (say the reduce is doing a sum) as
this would save us doing a copy.  We don't need to keep a copy of the data
from the source.  I haven't implemented this, but I think this interface
could in the future do all this through the use of the flags - eg could
specify the math operation and type and the kernel rather than just
copying the data would apply the specified operation between the source
and destination and store it in the destination.

Although we don't have a "second user" of the interface (though I've had
some nibbles from people who may be interested in using it for intra
process messaging which is not MPI).  This interface is something which
hardware vendors are already doing for their custom drivers to implement
fast local communication.  And so in addition to this being useful for
OpenMPI it would mean the driver maintainers don't have to fix things up
when the mm changes.

There was some discussion about how much faster a true zero copy would
go. Here's a link back to the email with some testing I did on that:

http://marc.info/?l=linux-mm&m=130105930902915&w=2

There is a basic man page for the proposed interface here:

http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt

This has been implemented for x86 and powerpc, other architecture should
mainly (I think) just need to add syscall numbers for the process_vm_readv
and process_vm_writev. There are 32 bit compatibility versions for
64-bit kernels.

For arch maintainers there are some simple tests to be able to quickly
verify that the syscalls are working correctly here:

http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz

Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <linux-man@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00
Mimi Zohar 2b3ff6319e encrypted-keys: check hex2bin result
For each hex2bin call in encrypted keys, check that the ascii hex string
is valid.  On failure, return -EINVAL.

Changelog v1:
- hex2bin now returns an int

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2011-09-20 23:26:44 -04:00
Mimi Zohar 2684bf7f29 trusted-keys: check hex2bin result
For each hex2bin call in trusted keys, check that the ascii hex string is
valid.  On failure, return -EINVAL.

Changelog v1:
- hex2bin now returns an int

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2011-09-20 23:26:05 -04:00
Stephen Rothwell cc100551b4 encrypted-keys: IS_ERR need include/err.h
Fixes this build error:

security/keys/encrypted-keys/masterkey_trusted.c: In function 'request_trusted_key':
security/keys/encrypted-keys/masterkey_trusted.c:35:2: error: implicit declaration of function 'IS_ERR'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-09-15 17:37:24 -04:00
Mimi Zohar 982e617a31 encrypted-keys: remove trusted-keys dependency
Encrypted keys are decrypted/encrypted using either a trusted-key or,
for those systems without a TPM, a user-defined key.  This patch
removes the trusted-keys and TCG_TPM dependencies.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-09-14 15:23:49 -04:00
Mimi Zohar 61cf45d019 encrypted-keys: create encrypted-keys directory
Move all files associated with encrypted keys to keys/encrypted-keys.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-09-14 15:22:26 -04:00
David Howells 0c061b5707 KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.

Fix this by the following means:

 (1) The key code has two garbage collectors: one deletes unreferenced keys and
     the other alters keyrings to delete links to old dead, revoked and expired
     keys.  They can end up holding each other up as both want to scan the key
     serial tree under spinlock.  Combine these into a single routine.

 (2) Move the dead key marking, dead link removal and dead key removal into the
     garbage collector as a three phase process running over the three cycles
     of the normal garbage collection procedure.  This is tracked by the
     KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.

     unregister_key_type() then just unlinks the key type from the list, wakes
     up the garbage collector and waits for the third phase to complete.

 (3) Downgrade the key types sem in unregister_key_type() once it has deleted
     the key type from the list so that it doesn't block the keyctl() syscall.

 (4) Dead keys that cannot be simply removed in the third phase have their
     payloads destroyed with the key's semaphore write-locked to prevent
     interference by the keyctl() syscall.  There should be no in-kernel users
     of dead keys of that type by the point of unregistration, though keyctl()
     may be holding a reference.

 (5) Only perform timer recalculation in the GC if the timer actually expired.
     If it didn't, we'll get another cycle when it goes off - and if the key
     that actually triggered it has been removed, it's not a problem.

 (6) Only garbage collect link if the timer expired or if we're doing dead key
     clean up phase 2.

 (7) As only key_garbage_collector() is permitted to use rb_erase() on the key
     serial tree, it doesn't need to revalidate its cursor after dropping the
     spinlock as the node the cursor points to must still exist in the tree.

 (8) Drop the spinlock in the GC if there is contention on it or if we need to
     reschedule.  After dealing with that, get the spinlock again and resume
     scanning.

This has been tested in the following ways:

 (1) Run the keyutils testsuite against it.

 (2) Using the AF_RXRPC and RxKAD modules to test keytype removal:

     Load the rxrpc_s key type:

	# insmod /tmp/af-rxrpc.ko
	# insmod /tmp/rxkad.ko

     Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):

	# /tmp/listen &
	[1] 8173

     Find the key:

	# grep rxrpc_s /proc/keys
	091086e1 I--Q--     1 perm 39390000     0     0 rxrpc_s   52:2

     Link it to a session keyring, preferably one with a higher serial number:

	# keyctl link 0x20e36251 @s

     Kill the process (the key should remain as it's linked to another place):

	# fg
	/tmp/listen
	^C

     Remove the key type:

	rmmod rxkad
	rmmod af-rxrpc

     This can be made a more effective test by altering the following part of
     the patch:

	if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
		/* Make sure everyone revalidates their keys if we marked a
		 * bunch as being dead and make sure all keyring ex-payloads
		 * are destroyed.
		 */
		kdebug("dead sync");
		synchronize_rcu();

     To call synchronize_rcu() in GC phase 1 instead.  That causes that the
     keyring's old payload content to hang around longer until it's RCU
     destroyed - which usually happens after GC phase 3 is complete.  This
     allows the destroy_dead_key branch to be tested.

Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:37 +10:00
David Howells d199798bdf KEYS: The dead key link reaper should be non-reentrant
The dead key link reaper should be non-reentrant as it relies on global state
to keep track of where it's got to when it returns to the work queue manager to
give it some air.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:36 +10:00
David Howells b072e9bc2f KEYS: Make the key reaper non-reentrant
Make the key reaper non-reentrant by sticking it on the appropriate system work
queue when we queue it.  This will allow it to have global state and drop
locks.  It should probably be non-reentrant already as it may spend a long time
holding the key serial spinlock, and so multiple entrants can spend long
periods of time just sitting there spinning, waiting to get the lock.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:36 +10:00
David Howells 8bc16deabc KEYS: Move the unreferenced key reaper to the keys garbage collector file
Move the unreferenced key reaper function to the keys garbage collector file
as that's a more appropriate place with the dead key link reaper.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:36 +10:00
David Howells 6d528b0822 KEYS: __key_link() should use the RCU deref wrapper for keyring payloads
__key_link() should use the RCU deref wrapper rcu_dereference_locked_keyring()
for accessing keyring payloads rather than calling rcu_dereference_protected()
directly.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:34 +10:00
David Howells 3ecf1b4f34 KEYS: keyctl_get_keyring_ID() should create a session keyring if create flag set
The keyctl call:

	keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 1)

should create a session keyring if the process doesn't have one of its own
because the create flag argument is set - rather than subscribing to and
returning the user-session keyring as:

	keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 0)

will do.

This can be tested by commenting out pam_keyinit in the /etc/pam.d files and
running the following program a couple of times in a row:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>
	int main(int argc, char *argv[])
	{
		key_serial_t uk, usk, sk, nsk;
		uk  = keyctl_get_keyring_ID(KEY_SPEC_USER_KEYRING, 0);
		usk = keyctl_get_keyring_ID(KEY_SPEC_USER_SESSION_KEYRING, 0);
		sk  = keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 0);
		nsk = keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 1);
		printf("keys: %08x %08x %08x %08x\n", uk, usk, sk, nsk);
		return 0;
	}

Without this patch, I see:

	keys: 3975ddc7 119c0c66 119c0c66 119c0c66
	keys: 3975ddc7 119c0c66 119c0c66 119c0c66

With this patch, I see:

	keys: 2cb4997b 34112878 34112878 17db2ce3
	keys: 2cb4997b 34112878 34112878 39f3c73e

As can be seen, the session keyring starts off the same as the user-session
keyring each time, but with the patch a new session keyring is created when
the create flag is set.

Reported-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:34 +10:00
David Howells 995995378f KEYS: If install_session_keyring() is given a keyring, it should install it
If install_session_keyring() is given a keyring, it should install it rather
than just creating a new one anyway.  This was accidentally broken in:

	commit d84f4f992c
	Author: David Howells <dhowells@redhat.com>
	Date:   Fri Nov 14 10:39:23 2008 +1100
	Subject: CRED: Inaugurate COW credentials

The impact of that commit is that pam_keyinit no longer works correctly if
'force' isn't specified against a login process. This is because:

	keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 0)

now always creates a new session keyring and thus the check whether the session
keyring and the user-session keyring are the same is always false.  This leads
pam_keyinit to conclude that a session keyring is installed and it shouldn't be
revoked by pam_keyinit here if 'revoke' is specified.

Any system that specifies 'force' against pam_keyinit in the PAM configuration
files for login methods (login, ssh, su -l, kdm, etc.) is not affected since
that bypasses the broken check and forces the creation of a new session keyring
anyway (for which the revoke flag is not cleared) - and any subsequent call to
pam_keyinit really does have a session keyring already installed, and so the
check works correctly there.

Reverting to the previous behaviour will cause the kernel to subscribe the
process to the user-session keyring as its session keyring if it doesn't have a
session keyring of its own.  pam_keyinit will detect this and install a new
session keyring anyway (and won't clear the revert flag).

This can be tested by commenting out pam_keyinit in the /etc/pam.d files and
running the following program a couple of times in a row:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>
	int main(int argc, char *argv[])
	{
		key_serial_t uk, usk, sk;
		uk = keyctl_get_keyring_ID(KEY_SPEC_USER_KEYRING, 0);
		usk = keyctl_get_keyring_ID(KEY_SPEC_USER_SESSION_KEYRING, 0);
		sk = keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 0);
		printf("keys: %08x %08x %08x\n", uk, usk, sk);
		return 0;
	}

Without the patch, I see:

	keys: 3884e281 24c4dfcf 22825f8e
	keys: 3884e281 24c4dfcf 068772be

With the patch, I see:

	keys: 26be9c83 0e755ce0 0e755ce0
	keys: 26be9c83 0e755ce0 0e755ce0

As can be seen, with the patch, the session keyring is the same as the
user-session keyring each time; without the patch a new session keyring is
generated each time.

Reported-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-23 09:57:33 +10:00
Linus Torvalds 95b6886526 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
  tpm_nsc: Fix bug when loading multiple TPM drivers
  tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
  tpm: Fix compilation warning when CONFIG_PNP is not defined
  TOMOYO: Update kernel-doc.
  tpm: Fix a typo
  tpm_tis: Probing function for Intel iTPM bug
  tpm_tis: Fix the probing for interrupts
  tpm_tis: Delay ACPI S3 suspend while the TPM is busy
  tpm_tis: Re-enable interrupts upon (S3) resume
  tpm: Fix display of data in pubek sysfs entry
  tpm_tis: Add timeouts sysfs entry
  tpm: Adjust interface timeouts if they are too small
  tpm: Use interface timeouts returned from the TPM
  tpm_tis: Introduce durations sysfs entry
  tpm: Adjust the durations if they are too small
  tpm: Use durations returned from TPM
  TOMOYO: Enable conditional ACL.
  TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
  TOMOYO: Allow using executable's realpath and symlink's target as conditions.
  TOMOYO: Allow using owner/group etc. of file objects as conditions.
  ...

Fix up trivial conflict in security/tomoyo/realpath.c
2011-07-27 19:26:38 -07:00
Jiri Kosina b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Michal Hocko d8bf4ca9ca rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Since ca5ecddf (rcu: define __rcu address space modifier for sparse)
rcu_dereference_check use rcu_read_lock_held as a part of condition
automatically so callers do not have to do that as well.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-08 22:21:58 +02:00
James Morris 5b944a71a1 Merge branch 'linus' into next 2011-06-30 18:43:56 +10:00
Roberto Sassu 79a73d1887 encrypted-keys: add ecryptfs format support
The 'encrypted' key type defines its own payload format which contains a
symmetric key randomly generated that cannot be used directly to mount
an eCryptfs filesystem, because it expects an authentication token
structure.

This patch introduces the new format 'ecryptfs' that allows to store an
authentication token structure inside the encrypted key payload containing
a randomly generated symmetric key, as the same for the format 'default'.

More details about the usage of encrypted keys with the eCryptfs
filesystem can be found in the file 'Documentation/keys-ecryptfs.txt'.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Acked-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-06-27 09:11:17 -04:00
Roberto Sassu 4e561d388f encrypted-keys: add key format support
This patch introduces a new parameter, called 'format', that defines the
format of data stored by encrypted keys. The 'default' format identifies
encrypted keys containing only the symmetric key, while other formats can
be defined to support additional information. The 'format' parameter is
written in the datablob produced by commands 'keyctl print' or
'keyctl pipe' and is integrity protected by the HMAC.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-06-27 09:10:45 -04:00
Roberto Sassu 7103dff0e5 encrypted-keys: added additional debug messages
Some debug messages have been added in the function datablob_parse() in
order to better identify errors returned when dealing with 'encrypted'
keys.

Changelog from version v4:
- made the debug messages more understandable 

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-06-27 09:10:34 -04:00
Roberto Sassu 08fa2aa54e encrypted-keys: fixed valid_master_desc() function description
Valid key type prefixes for the parameter 'key-type' are: 'trusted' and
'user'.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-06-27 09:08:52 -04:00
Roberto Sassu f91c2c5cfa encrypted_keys: avoid dumping the master key if the request fails
Do not dump the master key if an error is encountered during the request.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-06-27 09:08:39 -04:00
David Howells b1d7dd80aa KEYS: Fix error handling in construct_key_and_link()
Fix error handling in construct_key_and_link().

If construct_alloc_key() returns an error, it shouldn't pass out through
the normal path as the key_serial() called by the kleave() statement
will oops when it gets an error code in the pointer:

  BUG: unable to handle kernel paging request at ffffffffffffff84
  IP: [<ffffffff8120b401>] request_key_and_link+0x4d7/0x52f
  ..
  Call Trace:
   [<ffffffff8120b52c>] request_key+0x41/0x75
   [<ffffffffa00ed6e8>] cifs_get_spnego_key+0x206/0x226 [cifs]
   [<ffffffffa00eb0c9>] CIFS_SessSetup+0x511/0x1234 [cifs]
   [<ffffffffa00d9799>] cifs_setup_session+0x90/0x1ae [cifs]
   [<ffffffffa00d9c02>] cifs_get_smb_ses+0x34b/0x40f [cifs]
   [<ffffffffa00d9e05>] cifs_mount+0x13f/0x504 [cifs]
   [<ffffffffa00caabb>] cifs_do_mount+0xc4/0x672 [cifs]
   [<ffffffff8113ae8c>] mount_fs+0x69/0x155
   [<ffffffff8114ff0e>] vfs_kern_mount+0x63/0xa0
   [<ffffffff81150be2>] do_kern_mount+0x4d/0xdf
   [<ffffffff81152278>] do_mount+0x63c/0x69f
   [<ffffffff8115255c>] sys_mount+0x88/0xc2
   [<ffffffff814fbdc2>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-21 18:31:45 -07:00
David Howells 879669961b KEYS/DNS: Fix ____call_usermodehelper() to not lose the session keyring
____call_usermodehelper() now erases any credentials set by the
subprocess_inf::init() function.  The problem is that commit
17f60a7da1 ("capabilites: allow the application of capability limits
to usermode helpers") creates and commits new credentials with
prepare_kernel_cred() after the call to the init() function.  This wipes
all keyrings after umh_keys_init() is called.

The best way to deal with this is to put the init() call just prior to
the commit_creds() call, and pass the cred pointer to init().  That
means that umh_keys_init() and suchlike can modify the credentials
_before_ they are published and potentially in use by the rest of the
system.

This prevents request_key() from working as it is prevented from passing
the session keyring it set up with the authorisation token to
/sbin/request-key, and so the latter can't assume the authority to
instantiate the key.  This causes the in-kernel DNS resolver to fail
with ENOKEY unconditionally.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-17 09:40:48 -07:00
David Howells 4d67431f80 KEYS: Don't return EAGAIN to keyctl_assume_authority()
Don't return EAGAIN to keyctl_assume_authority() to indicate that a key could
not be found (ENOKEY is only returned if a negative key is found).  Instead
return ENOKEY in both cases.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-06-14 15:03:29 +10:00
Linus Torvalds e52e713ec3 Merge branch 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  Create Documentation/security/, move LSM-, credentials-, and keys-related files from Documentation/   to Documentation/security/, add Documentation/security/00-INDEX, and update all occurrences of Documentation/<moved_file>   to Documentation/security/<moved_file>.
2011-05-27 10:25:02 -07:00
Serge E. Hallyn f7285b5d63 Set cred->user_ns in key_replace_session_keyring
Since this cred was not created with copy_creds(), it needs to get
initialized.  Otherwise use of syscall(__NR_keyctl, KEYCTL_SESSION_TO_PARENT);
can lead to a NULL deref.  Thanks to Robert for finding this.

But introduced by commit 47a150edc2 ("Cache user_ns in struct cred").

Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Reported-by: Robert Święcki <robert@swiecki.net>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org (2.6.39)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 13:49:19 -07:00
James Morris 434d42cfd0 Merge branch 'next' into for-linus 2011-05-24 22:55:24 +10:00
Randy Dunlap d410fa4ef9 Create Documentation/security/,
move LSM-, credentials-, and keys-related files from Documentation/
  to Documentation/security/,
add Documentation/security/00-INDEX, and
update all occurrences of Documentation/<moved_file>
  to Documentation/security/<moved_file>.
2011-05-19 15:59:38 -07:00
Lai Jiangshan 3acb458c32 security,rcu: convert call_rcu(user_update_rcu_disposal) to kfree_rcu()
The rcu callback user_update_rcu_disposal() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(user_update_rcu_disposal).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07 22:50:54 -07:00
David Howells 4aab1e896a KEYS: Make request_key() and co. return an error for a negative key
Make request_key() and co. return an error for a negative or rejected key.  If
the key was simply negated, then return ENOKEY, otherwise return the error
with which it was rejected.

Without this patch, the following command returns a key number (with the latest
keyutils):

	[root@andromeda ~]# keyctl request2 user debug:foo rejected @s
	586569904

Trying to print the key merely gets you a permission denied error:

	[root@andromeda ~]# keyctl print 586569904
	keyctl_read_alloc: Permission denied

Doing another request_key() call does get you the error, as long as it hasn't
expired yet:

	[root@andromeda ~]# keyctl request user debug:foo
	request_key: Key was rejected by service

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-17 11:59:49 +11:00
David Howells 78b7280cce KEYS: Improve /proc/keys
Improve /proc/keys by:

 (1) Don't attempt to summarise the payload of a negated key.  It won't have
     one.  To this end, a helper function - key_is_instantiated() has been
     added that allows the caller to find out whether the key is positively
     instantiated (as opposed to being uninstantiated or negatively
     instantiated).

 (2) Do show keys that are negative, expired or revoked rather than hiding
     them.  This requires an override flag (no_state_check) to be passed to
     search_my_process_keyrings() and keyring_search_aux() to suppress this
     check.

     Without this, keys that are possessed by the caller, but only grant
     permissions to the caller if possessed are skipped as the possession check
     fails.

     Keys that are visible due to user, group or other checks are visible with
     or without this patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-17 11:59:32 +11:00
David Howells ee009e4a0d KEYS: Add an iovec version of KEYCTL_INSTANTIATE
Add a keyctl op (KEYCTL_INSTANTIATE_IOV) that is like KEYCTL_INSTANTIATE, but
takes an iovec array and concatenates the data in-kernel into one buffer.
Since the KEYCTL_INSTANTIATE copies the data anyway, this isn't too much of a
problem.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-08 11:17:22 +11:00
David Howells fdd1b94581 KEYS: Add a new keyctl op to reject a key with a specified error code
Add a new keyctl op to reject a key with a specified error code.  This works
much the same as negating a key, and so keyctl_negate_key() is made a special
case of keyctl_reject_key().  The difference is that keyctl_negate_key()
selects ENOKEY as the error to be reported.

Typically the key would be rejected with EKEYEXPIRED, EKEYREVOKED or
EKEYREJECTED, but this is not mandatory.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-08 11:17:18 +11:00
David Howells b9fffa3877 KEYS: Add a key type op to permit the key description to be vetted
Add a key type operation to permit the key type to vet the description of a new
key that key_alloc() is about to allocate.  The operation may reject the
description if it wishes with an error of its choosing.  If it does this, the
key will not be allocated.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-08 11:17:15 +11:00
David Howells 633e804e89 KEYS: Add an RCU payload dereference macro
Add an RCU payload dereference macro as this seems to be a common piece of code
amongst key types that use RCU referenced payloads.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-08 11:17:11 +11:00
David Howells ceb73c1204 KEYS: Fix __key_link_end() quota fixup on error
Fix __key_link_end()'s attempt to fix up the quota if an error occurs.

There are two erroneous cases: Firstly, we always decrease the quota if
the preallocated replacement keyring needs cleaning up, irrespective of
whether or not we should (we may have replaced a pointer rather than
adding another pointer).

Secondly, we never clean up the quota if we added a pointer without the
keyring storage being extended (we allocate multiple pointers at a time,
even if we're not going to use them all immediately).

We handle this by setting the bottom bit of the preallocation pointer in
__key_link_begin() to indicate that the quota needs fixing up, which is
then passed to __key_link() (which clears the whole thing) and
__key_link_end().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 08:58:20 +10:00
Jesper Juhl 5403110943 trusted keys: Fix a memory leak in trusted_update().
One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24 10:59:58 +11:00
Mimi Zohar b970344934 encrypted-keys: rename encrypted_defined files to encrypted
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24 10:27:57 +11:00
Mimi Zohar 4b174b6d28 trusted-keys: rename trusted_defined files to trusted
Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24 10:14:22 +11:00
David Howells 973c9f4f49 KEYS: Fix up comments in key management code
Fix up comments in the key management code.  No functional changes.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 14:59:30 -08:00
David Howells a8b17ed019 KEYS: Do some style cleanup in the key management code.
Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 14:59:29 -08:00
Tetsuo Handa 154a96bfcd trusted-keys: avoid scattring va_end()
We can avoid scattering va_end() within the

  va_start();
  for (;;) {

  }
  va_end();

loop, assuming that crypto_shash_init()/crypto_shash_update() return 0 on
success and negative value otherwise.

Make TSS_authhmac()/TSS_checkhmac1()/TSS_checkhmac2() similar to TSS_rawhmac()
by removing "va_end()/goto" from the loop.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-19 09:53:59 +11:00
Tetsuo Handa 0e7491f685 trusted-keys: check for NULL before using it
TSS_rawhmac() checks for data != NULL before using it.
We should do the same thing for TSS_authhmac().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-19 09:53:56 +11:00
Tetsuo Handa 35576eab39 trusted-keys: another free memory bugfix
TSS_rawhmac() forgot to call va_end()/kfree() when data == NULL and
forgot to call va_end() when crypto_shash_update() < 0.
Fix these bugs by escaping from the loop using "break"
(rather than "return"/"goto") in order to make sure that
va_end()/kfree() are always called.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-19 09:53:53 +11:00
Mimi Zohar 40c1001792 trusted-keys: free memory bugfix
Add missing kfree(td) in tpm_seal() before the return, freeing
td on error paths as well.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Safford <safford@watson.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-14 10:27:46 +11:00