Commit Graph

164 Commits

Author SHA1 Message Date
Takashi Iwai 4e83998f5a Merge branch 'fix/misc' into topic/misc 2010-10-11 13:45:22 +02:00
Takashi Iwai dd1d3a49db ALSA: oxygen - Add a SSID for CMI8787-HG2PCI
This board has a strange PCI SSID 13f6:ffff.  Works as compabile as
MODEL_CMEDIA_REF.

Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 17:28:56 +02:00
Clemens Ladisch ebebeece4b ALSA: oxygen: add PEX8111 initialization
Configure the PEX8111 bridge on the PCI Express cards so that the audio
DMA controller can do proper burst reads and is less likely to lose
data.  This is usually done automatically, but is required on older
cards where the user has not applied the PLX firmware update.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:18 +02:00
Clemens Ladisch 7cb4ced5aa ALSA: oxygen: rewrite PCIe bridge initialization
Change the PCIe/PCI bridge initialization code to configure only the
bridge that is actually connected to the sound chip, instead of any
bridge found in the system.  The new code also makes it easier to add
other bridges.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:12 +02:00
Clemens Ladisch 93943beb29 ALSA: oxygen: reduce minimum period count
The interrupt counter is independent of the buffer counter, so there are
no restrictions on the period size.  Having fewer periods also makes
PulseAudio happy.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:03 +02:00
Clemens Ladisch 9a0b379265 ALSA: oxygen: fix input monitor dB scale
The input monitor half volume bit results in a factor of 0.5, so the
minimum scale value should be -6 dB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:23 +02:00
Clemens Ladisch de0074ee7a ALSA: oxygen: fix chip ID register symbols
Rename the symbol for the XCID pins, fix up a decimal/hex confusion for
the CMI8787 package ID, and add the other known package IDs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:22 +02:00
Clemens Ladisch d737f3eede ALSA: virtuoso: fix Xonar STX anti-pop delay
The anti-pop delay for the STX should be 800 ms, not 100 ms like the ST.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:20 +02:00
Clemens Ladisch 2b830bae1f ALSA: virtuoso: add HDAV1.3 Slim PCI ID
Add a PCI ID for the Xonar HDAV1.3 Slim.  There is no actual support,
but the presence of the ID allows the EEPROM repair code to work for
this card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:19 +02:00
Clemens Ladisch b6ca8ab399 ALSA: oxygen: handle CD input configuration with a flag
There are more models without a CD input than with one, so handle this
explicitly with a device_config flag to avoid having to define a control
filter callback to filter it out.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:17 +02:00
Clemens Ladisch 45bc307f32 ALSA: virtuoso: fix Xonar DS chip name
The controller on the Xonar DS is labeled "AV66", not "AV200".

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:15 +02:00
Erik J. Staab 0873a5ae74 ALSA: oxygen: fix analog capture on Claro halo cards
On the HT-Omega Claro halo card, the ADC data must be captured from the
second I2S input.  Using the default first input, which isn't connected
to anything, would result in silence.

Signed-off-by: Erik J. Staab <ejs@insightbb.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-22 10:04:08 +02:00
Clemens Ladisch 2dbf0ea29c ALSA: virtuoso: Xonar DS: add stereo upmixing to center/LFE channels
Add the possibility to route a mix of the two channels of stereo data to
the center and LFE outputs.  Due to a WM8766 restriction, all surround
and back channels also get the mixed L/R signal in this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:37 +02:00
Clemens Ladisch 84cf83a28d ALSA: virtuoso: automatically handle Xonar DS headphone routing
Automatically mute the speaker outputs as long as a headphone is plugged.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:33 +02:00
Clemens Ladisch 435feac648 ALSA: virtuoso: add Xonar DS headphone jack detection
Now that the polarity of the headphone detection pin is known, replace
the debugging message with a proper jack plug input device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:30 +02:00
Clemens Ladisch 9bac84edf0 ALSA: virtuoso: fix Xonar DS input switches
Use the correct number, register bits, and names for the input switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:27 +02:00
Clemens Ladisch da0dab5ecb ALSA: virtuoso: fix WM8766 register writes with MSB
The check for the volume update latch bit was accidentally in the wrong
function, where it would prevent the MSB from being written, instead of
correctly ignoring it for cached values.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 10:53:23 +02:00
Clemens Ladisch fe6ce80ae2 ALSA: virtuoso: fix setting of Xonar DS line-in/mic-in controls
The Line and Mic inputs cannot be used at the same time, so the driver
has to automatically disable one of them if both are set.  However, it
forgot to notify userspace about this change, so the mixer state would
be inconsistent.  To fix this, check if the other control gets muted,
and send a notification event in this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Nathan Schagen
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-08 08:26:15 +02:00
Clemens Ladisch 4c25b93223 ALSA: virtuoso: work around missing reset in the Xonar DS Windows driver
For the WM8776 chip, this driver uses a different sample format and
more features than the Windows driver.  When rebooting from Linux into
Windows, the latter driver does not reset the chip but assumes all its
registers have their default settings, so we get garbled sound or, if
the output happened to be muted before rebooting, no sound.

To make that driver happy, hook our driver's cleanup function into the
shutdown notifier and ensure that the chip gets reset.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Nathan Schagen
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-08 08:26:13 +02:00
Clemens Ladisch 6a45f78225 ALSA: virtuoso: fix Xonar D1/DX front panel microphone
Commit 65c3ac885c in 2.6.33 accidentally
left out the initialization of the AC97 codec FMIC2MIC bit, which broke
recording from the front panel microphone.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-12 10:28:36 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Clemens Ladisch faf4eb23d5 ALSA: oxygen: change || to &&
In the original code the condition was always true (hopefully) because
WM8776_HPLVOL is zero.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-03 22:39:31 +01:00
Alexey Dobriyan cebe41d4b8 sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-09 11:08:33 +01:00
Clemens Ladisch d1db38c015 sound: virtuoso: add Xonar DS support
Add experimental support for the Asus Xonar DS.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-18 16:38:41 +01:00
Clemens Ladisch 62428f7b8c sound: oxygen: fix input monitor control names
Insert "Playback" into the input monitor control names to prevent
alsa-lib from treating these controls as global controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:55:17 +02:00
Clemens Ladisch 1ff048869e sound: oxygen: add high-pass filter control
Add a control that allows disabling the high-pass filter of the WM8785 ADC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:55:08 +02:00
Clemens Ladisch 4852ad0247 sound: oxygen: add digital filter control
Add a control to select between sharp and slow roll-of filter responses
of the DACs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:55:00 +02:00
Clemens Ladisch 973dca93a3 sound: virtuoso: add PCM1796 oversampling control
Add a control to increase the oversampling factor to 128x on cards with
PCM1796 or PCM1792A DACs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:52 +02:00
Clemens Ladisch 76ffe1e3fb sound: oxygen: allow custom MCLK rates
Add a callback that allows model drivers to modify the default I2S MCLK
rate.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:45 +02:00
Clemens Ladisch a361e247b4 sound: virtuoso: add headphone impedance control
Add a mixer control to adjust the headphone amplifier output for
headphones with different impedances.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:37 +02:00
Clemens Ladisch 6f0de3ce06 sound: oxygen: cache codec registers
Keep a cache of codec registers to avoid unnecessary writes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:29 +02:00
Clemens Ladisch dc0adf48da sound: oxygen: more hardware documentation
Add some comments describing the hardware pin routing.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:20 +02:00
Clemens Ladisch 3d8bb454c4 sound: oxygen: add stereo upmixing to center/LFE channels
Add the possibility to route a mix of the two channels of stereo data to
the center and LFE outputs.  This is implemented only for models where
the DACs support this, i.e., for the Xonar D1 and DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:11 +02:00
Clemens Ladisch 75919d7c05 sound: oxygen: better defaults for upmixing control
On card models with two-channel outputs, the base driver can
automatically disable the upmixing control so that the model
drivers do not need to do this.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:00 +02:00
Clemens Ladisch 268304f4c4 sound: virtuoso: fix Xonar Essence ST support
The Essence ST uses the CS2000 chip to generate the DAC master clock, so
we better initialize and program it appropriately.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:51 +02:00
Clemens Ladisch 65c3ac885c sound: virtuoso: split virtuoso.c
The virtuoso.c file has become rather big.  This patch splits it up so
that only code for very similar card models is in one file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:38 +02:00
Clemens Ladisch 362bc24d67 sound: oxygen: fix for PI7C9X110 compatibility
If the card is used with a Pericom PI7C9X110 PCI-E/PCI bridge,
reconfigure the latter's PCI buffering to fix an unknown problem.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:30 +02:00
Clemens Ladisch 87b61902ce sound: oxygen: do not try to restore nonexistent EEPROM
On cards where the EEPROM was deliberately omitted, we do not need to
try to restore the EEPROM's contents.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:21 +02:00
Clemens Ladisch f1bc07af9a sound: oxygen: work around MCE when changing volume
When the volume is changed continuously (e.g., when the user drags a
volume slider with the mouse), the driver does lots of I2C writes.
Apparently, the sound chip can get confused when we poll the I2C status
register too much, and fails to complete a read from it.  On the PCI-E
models, the PCI-E/PCI bridge gets upset by this and generates a machine
check exception.

To avoid this, this patch replaces the polling with an unconditional
wait that is guaranteed to be long enough.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Johann Messner <johann.messner at jku.at>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07 12:15:43 +02:00
Clemens Ladisch 92653453c3 sound: oxygen: handle cards with missing EEPROM
The card model detection code introduced in 2.6.30 that tries to work
around partially broken EEPROM contents by reading the EEPROM directly
does not handle cards where the EEPROM has been omitted.  In this case,
we have to use the default ID to allow the driver to load.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Ozan Çağlayan <ozan@pardus.org.tr>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-03 07:38:06 +02:00
Clemens Ladisch b91ab72b83 sound: oxygen: fix MCLK rate for 192 kHz playback
Do not forget to program the MCLK ratio for the I2S output.
Otherwise, the master clock frequency can be too high for
the DACs at sample frequencies above 96 kHz.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01 08:45:40 +02:00
Clemens Ladisch 826390796d sound: virtuoso: fix Xonar D1/DX silence after resume
When resuming, we better take the DACs out of the reset state before
trying to use them.

Reference: kernel bug #13599
	http://bugzilla.kernel.org/show_bug.cgi?id=13599

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-02 10:35:35 +02:00
Clemens Ladisch 14744d7da2 sound: oxygen: make mic volume control mono
The microphone input and its volume register have only one channel, so
we have to make the corresponding mixer control a mono control.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25 15:39:02 +02:00
Clemens Ladisch 04f9890df1 sound: virtuoso: add Xonar Essence ST support
Add support for the Asus Xonar Essence ST and its daughterboard.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:58 +02:00
Clemens Ladisch b990ae963a sound: virtuoso: enable HDAV S/PDIF input
The Xonar HDAV1.3 has a digital input jack, so enable the corresponding
device.

This is not related to the HDMI stuff, which stays unsupported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:52 +02:00
Clemens Ladisch 53bb705d12 sound: virtuoso: add another DX PCI ID
Add another PCI ID for a second revision of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:44 +02:00
Clemens Ladisch 345c03ef0f sound: oxygen: reset DMA when stream is closed
When a PCM stream is closed, flush the corresponding DMA channel.
Otherwise, the DMA controller would continue to output the last sample
which would result in a DC offset on the output.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25 11:49:30 +02:00
Clemens Ladisch 873591db59 sound: oxygen: enable headphone output on Claro cards
On the HT-Omega Claro (halo) sound cards, the headphone amplifier must
be enabled explicitly by setting a GPIO bit.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 09:45:11 +01:00
Clemens Ladisch 82af308f65 sound: oxygen: zero-initialize model data
Model drivers assume that model_data is zeroed, so we better use
kzalloc() (like we did before when it was allocated together with the
card structure).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:32:21 +01:00
Clemens Ladisch 930738de60 sound: virtuoso: add Xonar Essence STX support
Add support for the Asus Xonar Essence STX sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26 09:39:08 +01:00