Commit Graph

12045 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt cd15b04844 powerpc/powernv: Add iommu DMA bypass support for IODA2
This patch adds the support for to create a direct iommu "bypass"
window on IODA2 bridges (such as Power8) allowing to bypass iommu
page translation completely for 64-bit DMA capable devices, thus
significantly improving DMA performances.

Additionally, this adds a hook to the struct iommu_table so that
the IOMMU API / VFIO can disable the bypass when external ownership
is requested, since in that case, the device will be used by an
environment such as userspace or a KVM guest which must not be
allowed to bypass translations.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 16:07:37 +11:00
Anton Blanchard ea961a828f powerpc: Fix endian issues in kexec and crash dump code
We expose a number of OF properties in the kexec and crash dump code
and these need to be big endian.

Cc: stable@vger.kernel.org # v3.13
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:52 +11:00
Kevin Hao 04a341138d powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP
We would allocate one specific exception stack for each kind of
non-base exceptions for every CPU. For ppc32 the CPU hard ID is
used as the subscript to get the specific exception stack for
one CPU. But for an UP kernel, there is only one element in the
each kind of exception stack array. We would get stuck if the
CPU hard ID is not equal to '0'. So in this case we should use the
subscript '0' no matter what the CPU hard ID is.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:52 +11:00
Michael Ellerman d2b496e5e1 powerpc/xmon: Don't signal we've entered until we're finished printing
Currently we set our cpu's bit in cpus_in_xmon, and then we take the
output lock and print the exception information.

This can race with the master cpu entering the command loop and printing
the backtrace. The result is that the backtrace gets garbled with
another cpu's exception print out.

Fix it by delaying the set of cpus_in_xmon until we are finished
printing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:51 +11:00
Michael Ellerman 1507589787 powerpc/xmon: Fix timeout loop in get_output_lock()
As far as I can tell, our 70s era timeout loop in get_output_lock() is
generating no code.

This leads to the hostile takeover happening more or less simultaneously
on all cpus. The result is "interesting", some example output that is
more readable than most:

    cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00
    c0:0  000t0o0V0erc0td:o5 rfc28050000]0c00 0 0  0 6t(pSrycsV1ppuot
    uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs

Fix it by using udelay() in the timeout loop. The wait time and check
frequency are arbitrary, but seem to work OK. We already rely on
udelay() working so this is not a new dependency.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:51 +11:00
Michael Ellerman 730efb6193 powerpc/xmon: Don't loop forever in get_output_lock()
If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also
skip the while loop because xmon_speaker != last_speaker (0) - meaning we
skip the second cmpxchg() also.

Following that code path the compiler sees no memory barriers and so is
within its rights to never reload xmon_speaker. The end result is we loop
forever.

This manifests as all cpus being in xmon ('c' command), but they refuse
to take control when you switch to them ('c x' for cpu # x).

I have seen this deadlock in practice and also checked the generated code to
confirm this is what's happening.

The simplest fix is just to always try the cmpxchg().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:50 +11:00
Anshuman Khandual b4d6c06c8d powerpc/perf: Configure BHRB filter before enabling PMU interrupts
Right now the config_bhrb() PMU specific call happens after
write_mmcr0(), which actually enables the PMU for event counting and
interrupts. So there is a small window of time where the PMU and BHRB
runs without the required HW branch filter (if any) enabled in BHRB.

This can cause some of the branch samples to be collected through BHRB
without any filter applied and hence affects the correctness of
the results. This patch moves the BHRB config function call before
enabling interrupts.

Here are some data points captured via trace prints which depicts how we
could get PMU interrupts with BHRB filter NOT enabled with a standard
perf record command line (asking for branch record information as well).

    $ perf record -j any_call ls

Before the patch:-

    ls-1962  [003] d...  2065.299590: .perf_event_interrupt: MMCRA: 40000000000
    ls-1962  [003] d...  2065.299603: .perf_event_interrupt: MMCRA: 40000000000
    ...

    All the PMU interrupts before this point did not have the requested
    HW branch filter enabled in the MMCRA.

    ls-1962  [003] d...  2065.299647: .perf_event_interrupt: MMCRA: 40040000000
    ls-1962  [003] d...  2065.299662: .perf_event_interrupt: MMCRA: 40040000000

After the patch:-

    ls-1850  [008] d...   190.311828: .perf_event_interrupt: MMCRA: 40040000000
    ls-1850  [008] d...   190.311848: .perf_event_interrupt: MMCRA: 40040000000

    All the PMU interrupts have the requested HW BHRB branch filter
    enabled in MMCRA.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Fixed up whitespace and cleaned up changelog]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:50 +11:00
Michael Ellerman 8d4887ee30 powerpc/pseries: Select ARCH_RANDOM on pseries
We have a driver for the ARCH_RANDOM hook in rng.c, so we should select
ARCH_RANDOM on pseries.

Without this the build breaks if you turn ARCH_RANDOM off.

This hasn't broken the build because pseries_defconfig doesn't specify a
value for PPC_POWERNV, which is default y, and selects ARCH_RANDOM.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:49 +11:00
Michael Ellerman 2fdd313f54 powerpc/perf: Add Power8 cache & TLB events
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:48 +11:00
Laurent Dufour 3b830c824a powerpc/relocate fix relocate processing in LE mode
Relocation's code is not working in little endian mode because the r_info
field, which is a 64 bits value, should be read from the right offset.

The current code is optimized to read the r_info field as a 32 bits value
starting at the middle of the double word (offset 12). When running in LE
mode, the read value is not correct since only the MSB is read.

This patch removes this optimization which consist to deal with a 32 bits
value instead of a 64 bits one. This way it works in big and little endian
mode.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:48 +11:00
Mahesh Salgaonkar 429d2e8342 powerpc: Fix kdump hang issue on p8 with relocation on exception enabled.
On p8 systems, with relocation on exception feature enabled we are seeing
kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this
feature enabled, exception are raised with MMU (IR=DR=1) ON with the
default offset of 0xc*4000. Since exception is raised in virtual mode it
requires the vector region to be executable without which it fails to
fetch and execute instruction at 0xc*4xxx. For default kernel since kernel
is loaded at real 0, the htab mappings sets the entire kernel text region
executable. But for relocatable kernel (e.g. kdump case) we only copy
interrupt vectors down to real 0 and never marked that region as
executable because in p7 and below we always get exception in real mode.

This patch fixes this issue by marking htab mapping range as executable
that overlaps with the interrupt vector region for relocatable kernel.

Thanks to Ben who helped me to debug this issue and find the root cause.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:47 +11:00
Mahesh Salgaonkar 3ec8b78fcc powerpc/pseries: Disable relocation on exception while going down during crash.
Disable relocation on exception while going down even in kdump case. This
is because we are about clear htab mappings while kexec-ing into kdump
kernel and we may run into issues if we still have AIL ON.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:47 +11:00
Thadeu Lima de Souza Cascardo 8cc6b6cd87 powerpc/eeh: Drop taken reference to driver on eeh_rmv_device
Commit f5c57710dd ("powerpc/eeh: Use
partial hotplug for EEH unaware drivers") introduces eeh_rmv_device,
which may grab a reference to a driver, but not release it.

That prevents a driver from being removed after it has gone through EEH
recovery.

This patch drops the reference if it was taken.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:46 +11:00
Paul Gortmaker 0215b4aa06 powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y
Commit 446f6d06fa ("powerpc/mpic: Properly
set default triggers") breaks the mpc7447_hpc_defconfig as follows:

  CC      arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type':
arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant

Looking at the cpp output (gcc 4.7.3), I see:

   case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] |
        mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]:

The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set
for this platform, thus enabling the following:

  -------------------
  #ifdef CONFIG_MPIC_WEIRD
  static u32 mpic_infos[][MPIC_IDX_END] = {
        [0] = { /* Original OpenPIC compatible MPIC */

  [...]

  #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name]

  #else /* CONFIG_MPIC_WEIRD */

  #define MPIC_INFO(name) MPIC_##name

  #endif /* CONFIG_MPIC_WEIRD */
  -------------------

Here we convert the case section to if/else if, and also add
the equivalent of a default case to warn about unknown types.
Boot tested on sbc8548, build tested on all defconfigs.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:45 +11:00
Linus Torvalds e2a0f813e0 Second batch of KVM updates. Some minor x86 fixes,
two s390 guest features that need some handling in the host,
 and all the PPC changes.  The PPC changes include support for
 little-endian guests and enablement for new POWER8 features.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS6UF5AAoJEBvWZb6bTYby55kP/AgTJnyu7avN653/2aSHkjkx
 KgYSMYhZPIFoY5LyZuNetXaoXFRvCykux1VYSZ6V6s35h2PZ+hdJNbHGjFYKPGTq
 FQ92xQVNuWCAPxmFCjDNuDV/0BauG5y08/Orh/jpjz+GAfH43LruUQGbtXUuyJ8u
 vf+yTHniU5gguqsAmodqjHUgbf+GoPJ1j7hmRoWwt8IWm7Ns3v/IK4l0p6G0h26a
 RjE6aK+Tm208Yr5hD/dRAqeTbBNt3c4xub+QPsKoiEMaZBSuAOiux7D3Kx+If1gp
 WsmqEQxoymihVtkZhUFO9ONLJepvmG2QwJVVyMSUW9iqxX9rraXsvVyVMwcQAhog
 JuOAYxBftH07xu6Fs4eym5KvCFghM+EaJvxxt+kgnvdD4htK1+eK5trntc2zygSi
 /qGiIrkqjXpkskW8kujLayF0eAU3CrZvFWveEPBfFgYiOGX/2wzJCtSm/bt9Jo0M
 v60qgNFK3LNqAyeEfnm9VtlwGr6ZgsAB6DHNPX4fM5s2IBjL+qloXk/e/+aVKkW0
 I3yeRdy/ExhLAab6w81JtMeR7G3YS0UNuAEVvcoxzNb5wIBY8qnpfUzTKyMxQR94
 64EVpxWEYO1s55eCCyMujWrSvc+YAwhJcWHGKgC4K7mxxLD3FVyQXX6YZvgRozMX
 HjQju+DToj9CskyrFlRL
 =yd0Z
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
 "Second batch of KVM updates.  Some minor x86 fixes, two s390 guest
  features that need some handling in the host, and all the PPC changes.

  The PPC changes include support for little-endian guests and
  enablement for new POWER8 features"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits)
  x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101
  x86, kvm: cache the base of the KVM cpuid leaves
  kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef
  KVM: PPC: Book3S PR: Cope with doorbell interrupts
  KVM: PPC: Book3S HV: Add software abort codes for transactional memory
  KVM: PPC: Book3S HV: Add new state for transactional memory
  powerpc/Kconfig: Make TM select VSX and VMX
  KVM: PPC: Book3S HV: Basic little-endian guest support
  KVM: PPC: Book3S HV: Add support for DABRX register on POWER7
  KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells
  KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8
  KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs
  KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap
  KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8
  KVM: PPC: Book3S HV: Add handler for HV facility unavailable
  KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8
  KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs
  KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers
  KVM: PPC: Book3S HV: Don't set DABR on POWER8
  kvm/ppc: IRQ disabling cleanup
  ...
2014-01-31 08:37:32 -08:00
Linus Torvalds 4bcec913d0 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull more powerpc bits from Ben Herrenschmidt:
 "Here are a few more powerpc bits for this merge window.  The bulk is
  made of two pull requests from Scott and Anatolij that I had missed
  previously (they arrived while I was away).  Since both their branches
  are in -next independently, and the content has been around for a
  little while, they can still go in.

  The rest is mostly bug and regression fixes, a small series of
  cleanups to our pseries cpuidle code (including moving it to the right
  place), and one new cpuidle bakend for the powernv platform.  I also
  wired up the new sched_attr syscalls"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits)
  powerpc: Wire up sched_setattr and sched_getattr syscalls
  powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
  powerpc: Make sure "cache" directory is removed when offlining cpu
  powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
  powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
  powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
  powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.
  powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.
  powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.
  powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
  powerpc: Fix 32-bit frames for signals delivered when transactional
  powerpc/iommu: Fix initialisation of DART iommu table
  powerpc/numa: Fix decimal permissions
  powerpc/mm: Fix compile error of pgtable-ppc64.h
  powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
  clk: corenet: Adds the clock binding
  powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E
  powerpc/512x: dts: add MPC5125 clock specs
  powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
  powerpc/512x: clk: enforce even SDHC divider values
  ...
2014-01-30 17:07:18 -08:00
Linus Torvalds f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Paolo Bonzini b73117c493 Merge branch 'kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm-queue
Conflicts:
	arch/powerpc/kvm/book3s_hv_rmhandlers.S
	arch/powerpc/kvm/booke.c
2014-01-29 18:29:01 +01:00
Benjamin Herrenschmidt f878f84373 powerpc: Wire up sched_setattr and sched_getattr syscalls
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:13:05 +11:00
Tiejun Chen 94b09d7554 powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
Replace __get_cpu_var safely with get_cpu_var to avoid
the following call trace:

[ 7253.637591] BUG: using smp_processor_id() in preemptible [00000000 00000000]
code: hugemmap01/9048
[ 7253.637601] caller is free_hugepd_range.constprop.25+0x88/0x1a8
[ 7253.637605] CPU: 1 PID: 9048 Comm: hugemmap01 Not tainted 3.10.20-rt14+ #114
[ 7253.637606] Call Trace:
[ 7253.637617] [cb049d80] [c0007ea4] show_stack+0x4c/0x168 (unreliable)
[ 7253.637624] [cb049dc0] [c031c674] debug_smp_processor_id+0x114/0x134
[ 7253.637628] [cb049de0] [c0016d28] free_hugepd_range.constprop.25+0x88/0x1a8
[ 7253.637632] [cb049e00] [c001711c] hugetlb_free_pgd_range+0x6c/0x168
[ 7253.637639] [cb049e40] [c0117408] free_pgtables+0x12c/0x150
[ 7253.637646] [cb049e70] [c011ce38] unmap_region+0xa0/0x11c
[ 7253.637671] [cb049ef0] [c011f03c] do_munmap+0x224/0x3bc
[ 7253.637676] [cb049f20] [c011f2e0] vm_munmap+0x38/0x5c
[ 7253.637682] [cb049f40] [c000ef88] ret_from_syscall+0x0/0x3c
[ 7253.637686] --- Exception: c01 at 0xff16004

Signed-off-by: Tiejun Chen<tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:26 +11:00
Paul Mackerras 91b973f90c powerpc: Make sure "cache" directory is removed when offlining cpu
The code in remove_cache_dir() is supposed to remove the "cache"
subdirectory from the sysfs directory for a CPU when that CPU is
being offlined.  It tries to do this by calling kobject_put() on
the kobject for the subdirectory.  However, the subdirectory only
gets removed once the last reference goes away, and the reference
being put here may well not be the last reference.  That means
that the "cache" subdirectory may still exist when the offlining
operation has finished.  If the same CPU subsequently gets onlined,
the code tries to add a new "cache" subdirectory.  If the old
subdirectory has not yet been removed, we get a WARN_ON in the
sysfs code, with stack trace, and an error message printed on the
console.  Further, we ultimately end up with an online cpu with no
"cache" subdirectory.

This fixes it by doing an explicit kobject_del() at the point where
we want the subdirectory to go away.  kobject_del() removes the sysfs
directory even though the object still exists in memory.  The object
will get freed at some point in the future.  A subsequent onlining
operation can create a new sysfs directory, even if the old object
still exists in memory, without causing any problems.

Cc: stable@vger.kernel.org # v3.0+
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:26 +11:00
jmarchan@redhat.com 19751c07b3 powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
According to Posix, if MAP_FIXED is specified mmap shall set ENOMEM if
the requested mapping exceeds the allowed range for address space of
the process. The generic code set it right, but the specific powerpc
slice_get_unmapped_area() function currently returns -EINVAL in that
case.
This patch corrects it.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:25 +11:00
Deepthi Dharwar 2c2e6ecfd0 powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
Following patch ports the cpuidle framework for powernv
platform and also implements a cpuidle back-end powernv
idle driver calling on to power7_nap and snooze idle states.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:24 +11:00
Deepthi Dharwar 3fa8cad82b powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
smt-snooze-delay was designed to disable NAP state or delay the entry
to the NAP state prior to adoption of cpuidle framework. This
is per-cpu variable. With the coming of CPUIDLE framework,
states can be disabled on per-cpu basis using the cpuidle/enable
sysfs entry.

Also, with the coming of cpuidle driver each state's target residency
is per-driver unlike earlier which was per-device. Therefore,
the per-cpu sysfs smt-snooze-delay which decides the target residency
of the idle state on a particular cpu causes more confusion to the user
as we cannot have different smt-snooze-delay (target residency)
values for each cpu.

In the current code, smt-snooze-delay functionality is completely broken.
It makes sense to remove smt-snooze-delay from idle driver with the
coming of cpuidle framework.
However, sysfs files are retained as ppc64_util currently
utilises it. Once we fix ppc64_util, propose to clean
up the kernel code.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:24 +11:00
Deepthi Dharwar 962e7bd497 powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
Move the file from arch specific pseries/processor_idle.c
to drivers/cpuidle/cpuidle-pseries.c
Make the relevant Makefile and Kconfig changes.
Also, introduce Kconfig.powerpc in drivers/cpuidle
for all powerpc cpuidle drivers.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 17:02:22 +11:00
Paul Mackerras d765ff23e3 powerpc: Fix 32-bit frames for signals delivered when transactional
Commit d31626f70b ("powerpc: Don't corrupt transactional state when
using FP/VMX in kernel") introduced a bug where the uc_link and uc_regs
fields of the ucontext_t that is created to hold the transactional
values of the registers in a 32-bit signal frame didn't get set
correctly.  The reason is that we now clear the MSR_TS bits in the MSR
in save_tm_user_regs(), before the code that sets uc_link and uc_regs.
To fix this, we move the setting of uc_link and uc_regs into the same
if statement that selects whether to call save_tm_user_regs() or
save_user_regs().

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 16:58:49 +11:00
Alistair Popple 67bfa0ee66 powerpc/iommu: Fix initialisation of DART iommu table
Commit d084775738 switched the generic
powerpc iommu backend code to use the it_page_shift field to determine
page size. Commit 3a553170d3 should have
initiliased this field for all platforms, however the DART iommu table
code was not updated.

This commit initialises the it_page_shift field to 4K for the DART
iommu.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 16:58:49 +11:00
Joe Perches 316d718827 powerpc/numa: Fix decimal permissions
This should have been octal.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 16:58:48 +11:00
Li Zhong fd120dc2e2 powerpc/mm: Fix compile error of pgtable-ppc64.h
It seems that forward declaration couldn't work well with typedef, use
struct spinlock directly to avoiding following build errors:

In file included from include/linux/spinlock.h:81,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/uapi/linux/timex.h:56,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:17,
                 from arch/powerpc/kernel/asm-offsets.c:17:
include/linux/spinlock_types.h:76: error: redefinition of typedef 'spinlock_t'
/root/linux-next/arch/powerpc/include/asm/pgtable-ppc64.h:563: note: previous declaration of 'spinlock_t' was here

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 16:58:48 +11:00
Andreas Schwab 1c430c06d0 powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
This fixes a logic error that caused a failure to update the hw breakpoint
registers when not using the hw-breakpoint interface.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29 16:58:47 +11:00
Benjamin Herrenschmidt 6e677ef6fb Merge remote-tracking branch 'scott/next' into next
<<
This contains a fix for a chroma_defconfig build break that was
introduced by e6500 tablewalk support, and a device tree binding patch
that missed the previous pull request due to some last-minute polishing.
>>
2014-01-29 16:55:25 +11:00
Benjamin Herrenschmidt e9a371100d Merge remote-tracking branch 'agust/next' into next
<<
Switch mpc512x to the common clock framework and adapt mpc512x
drivers to use the new clock driver. Old PPC_CLOCK code is
removed entirely since there are no users any more.
>>
2014-01-29 16:53:55 +11:00
Linus Torvalds 1b17366d69 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...
2014-01-27 21:11:26 -08:00
Linus Torvalds d12de1ef5e Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc mremap fix from Ben Herrenschmidt:
 "This is the patch that I had sent after -rc8 and which we decided to
  wait before merging.  It's based on a different tree than my -next
  branch (it needs some pre-reqs that were in -rc4 or so while my -next
  is based on -rc1) so I left it as a separate branch for your to pull.
  It's identical to the request I did 2 or 3 weeks back.

  This fixes crashes in mremap with THP on powerpc.

  The fix however requires a small change in the generic code.  It moves
  a condition into a helper we can override from the arch which is
  harmless, but it *also* slightly changes the order of the set_pmd and
  the withdraw & deposit, which should be fine according to Kirill (who
  wrote that code) but I agree -rc8 is a bit late...

  It was acked by Kirill and Andrew told me to just merge it via powerpc"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/thp: Fix crash on mremap
2014-01-27 21:03:39 -08:00
Michael Ellerman 7179ba5288 powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
At a glance these are just the inverse of each other. The one subtlety
is that arch_spin_value_unlocked() takes the lock by value, rather than
as a pointer, which is important for the lockref code.

On the other hand arch_spin_is_locked() doesn't really care, so
implement it in terms of arch_spin_value_unlocked().

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-28 14:45:44 +11:00
Michael Ellerman 3405d230b3 powerpc: Add support for the optimised lockref implementation
This commit adds the architecture support required to enable the
optimised implementation of lockrefs.

That's as simple as defining arch_spin_value_unlocked() and selecting
the Kconfig option.

We also define cmpxchg64_relaxed(), because the lockref code does not
need the cmpxchg to have barrier semantics.

Using Linus' test case[1] on one system I see a 4x improvement for the
basic enablement, and a further 1.3x for cmpxchg64_relaxed(), for a
total of 5.3x vs the baseline.

On another system I see more like 2x improvement.

[1]: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-28 14:45:43 +11:00
Paul Mackerras 4068890931 KVM: PPC: Book3S PR: Cope with doorbell interrupts
When the PR host is running on a POWER8 machine in POWER8 mode, it
will use doorbell interrupts for IPIs.  If one of them arrives while
we are in the guest, we pop out of the guest with trap number 0xA00,
which isn't handled by kvmppc_handle_exit_pr, leading to the following
BUG_ON:

[  331.436215] exit_nr=0xa00 | pc=0x1d2c | msr=0x800000000000d032
[  331.437522] ------------[ cut here ]------------
[  331.438296] kernel BUG at arch/powerpc/kvm/book3s_pr.c:982!
[  331.439063] Oops: Exception in kernel mode, sig: 5 [#2]
[  331.439819] SMP NR_CPUS=1024 NUMA pSeries
[  331.440552] Modules linked in: tun nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw virtio_net kvm binfmt_misc ibmvscsi scsi_transport_srp scsi_tgt virtio_blk
[  331.447614] CPU: 11 PID: 1296 Comm: qemu-system-ppc Tainted: G      D      3.11.7-200.2.fc19.ppc64p7 #1
[  331.448920] task: c0000003bdc8c000 ti: c0000003bd32c000 task.ti: c0000003bd32c000
[  331.450088] NIP: d0000000025d6b9c LR: d0000000025d6b98 CTR: c0000000004cfdd0
[  331.451042] REGS: c0000003bd32f420 TRAP: 0700   Tainted: G      D       (3.11.7-200.2.fc19.ppc64p7)
[  331.452331] MSR: 800000000282b032 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI>  CR: 28004824  XER: 20000000
[  331.454616] SOFTE: 1
[  331.455106] CFAR: c000000000848bb8
[  331.455726]
GPR00: d0000000025d6b98 c0000003bd32f6a0 d0000000026017b8 0000000000000032
GPR04: c0000000018627f8 c000000001873208 320d0a3030303030 3030303030643033
GPR08: c000000000c490a8 0000000000000000 0000000000000000 0000000000000002
GPR12: 0000000028004822 c00000000fdc6300 0000000000000000 00000100076ec310
GPR16: 000000002ae343b8 00003ffffd397398 0000000000000000 0000000000000000
GPR20: 00000100076f16f4 00000100076ebe60 0000000000000008 ffffffffffffffff
GPR24: 0000000000000000 0000008001041e60 0000000000000000 0000008001040ce8
GPR28: c0000003a2d80000 0000000000000a00 0000000000000001 c0000003a2681810
[  331.466504] NIP [d0000000025d6b9c] .kvmppc_handle_exit_pr+0x75c/0xa80 [kvm]
[  331.466999] LR [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm]
[  331.467517] Call Trace:
[  331.467909] [c0000003bd32f6a0] [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm] (unreliable)
[  331.468553] [c0000003bd32f750] [d0000000025d98f0] kvm_start_lightweight+0xb4/0xc4 [kvm]
[  331.469189] [c0000003bd32f920] [d0000000025d7648] .kvmppc_vcpu_run_pr+0xd8/0x270 [kvm]
[  331.469838] [c0000003bd32f9c0] [d0000000025cf748] .kvmppc_vcpu_run+0xc8/0xf0 [kvm]
[  331.470790] [c0000003bd32fa50] [d0000000025cc19c] .kvm_arch_vcpu_ioctl_run+0x5c/0x1b0 [kvm]
[  331.471401] [c0000003bd32fae0] [d0000000025c4888] .kvm_vcpu_ioctl+0x478/0x730 [kvm]
[  331.472026] [c0000003bd32fc90] [c00000000026192c] .do_vfs_ioctl+0x4dc/0x7a0
[  331.472561] [c0000003bd32fd80] [c000000000261cc4] .SyS_ioctl+0xd4/0xf0
[  331.473095] [c0000003bd32fe30] [c000000000009ed8] syscall_exit+0x0/0x98
[  331.473633] Instruction dump:
[  331.473766] 4bfff9b4 2b9d0800 419efc18 60000000 60420000 3d220000 e8bf11a0 e8df12a8
[  331.474733] 7fa4eb78 e8698660 48015165 e8410028 <0fe00000> 813f00e4 3ba00000 39290001
[  331.475386] ---[ end trace 49fc47d994c1f8f2 ]---
[  331.479817]

This fixes the problem by making kvmppc_handle_exit_pr() recognize the
interrupt.  We also need to jump to the doorbell interrupt handler in
book3s_segment.S to handle the interrupt on the way out of the guest.
Having done that, there's nothing further to be done in
kvmppc_handle_exit_pr().

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:23 +01:00
Michael Neuling b17dfec060 KVM: PPC: Book3S HV: Add software abort codes for transactional memory
This adds the software abort code defines for transactional memory (TM).
These values are from PAPR.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:22 +01:00
Michael Neuling 7b490411c3 KVM: PPC: Book3S HV: Add new state for transactional memory
Add new state for transactional memory (TM) to kvm_vcpu_arch.  Also add
asm-offset bits that are going to be required.

This also moves the existing TFHAR, TFIAR and TEXASR SPRs into a
CONFIG_PPC_TRANSACTIONAL_MEM section.  This requires some code changes to
ensure we still compile with CONFIG_PPC_TRANSACTIONAL_MEM=N.  Much of the added
the added #ifdefs are removed in a later patch when the bulk of the TM code is
added.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: fix merge conflict]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:20 +01:00
Michael Neuling 7b37a12322 powerpc/Kconfig: Make TM select VSX and VMX
There are no processors in existence that have TM but no VMX or VSX.  So let's
makes CONFIG_PPC_TRANSACTIONAL_MEM select both CONFIG_VSX and CONFIG_ALTIVEC.
This makes the code a lot simpler by removing the need for a bunch of #ifdefs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:18 +01:00
Anton Blanchard d682916a38 KVM: PPC: Book3S HV: Basic little-endian guest support
We create a guest MSR from scratch when delivering exceptions in
a few places.  Instead of extracting LPCR[ILE] and inserting it
into MSR_LE each time, we simply create a new variable intr_msr which
contains the entire MSR to use.  For a little-endian guest, userspace
needs to set the ILE (interrupt little-endian) bit in the LPCR for
each vcpu (or at least one vcpu in each virtual core).

[paulus@samba.org - removed H_SET_MODE implementation from original
version of the patch, and made kvmppc_set_lpcr update vcpu->arch.intr_msr.]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:16 +01:00
Paul Mackerras 8563bf52d5 KVM: PPC: Book3S HV: Add support for DABRX register on POWER7
The DABRX (DABR extension) register on POWER7 processors provides finer
control over which accesses cause a data breakpoint interrupt.  It
contains 3 bits which indicate whether to enable accesses in user,
kernel and hypervisor modes respectively to cause data breakpoint
interrupts, plus one bit that enables both real mode and virtual mode
accesses to cause interrupts.  Currently, KVM sets DABRX to allow
both kernel and user accesses to cause interrupts while in the guest.

This adds support for the guest to specify other values for DABRX.
PAPR defines a H_SET_XDABR hcall to allow the guest to set both DABR
and DABRX with one call.  This adds a real-mode implementation of
H_SET_XDABR, which shares most of its code with the existing H_SET_DABR
implementation.  To support this, we add a per-vcpu field to store the
DABRX value plus code to get and set it via the ONE_REG interface.

For Linux guests to use this new hcall, userspace needs to add
"hcall-xdabr" to the set of strings in the /chosen/hypertas-functions
property in the device tree.  If userspace does this and then migrates
the guest to a host where the kernel doesn't include this patch, then
userspace will need to implement H_SET_XDABR by writing the specified
DABR value to the DABR using the ONE_REG interface.  In that case, the
old kernel will set DABRX to DABRX_USER | DABRX_KERNEL.  That should
still work correctly, at least for Linux guests, since Linux guests
cope with getting data breakpoint interrupts in modes that weren't
requested by just ignoring the interrupt, and Linux guests never set
DABRX_BTI.

The other thing this does is to make H_SET_DABR and H_SET_XDABR work
on POWER8, which has the DAWR and DAWRX instead of DABR/X.  Guests that
know about POWER8 should use H_SET_MODE rather than H_SET_[X]DABR, but
guests running in POWER7 compatibility mode will still use H_SET_[X]DABR.
For them, this adds the logic to convert DABR/X values into DAWR/X values
on POWER8.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:15 +01:00
Paul Mackerras 5d00f66b86 KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells
POWER8 has support for hypervisor doorbell interrupts.  Though the
kernel doesn't use them for IPIs on the powernv platform yet, it
probably will in future, so this makes KVM cope gracefully if a
hypervisor doorbell interrupt arrives while in a guest.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:13 +01:00
Paul Mackerras e0622bd9f2 KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8
POWER8 has a bit in the LPCR to enable or disable the PURR and SPURR
registers to count when in the guest.  Set this bit.

POWER8 has a field in the LPCR called AIL (Alternate Interrupt Location)
which is used to enable relocation-on interrupts.  Allow userspace to
set this field.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:11 +01:00
Paul Mackerras aa31e84322 KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs
* SRR1 wake reason field for system reset interrupt on wakeup from nap
  is now a 4-bit field on P8, compared to 3 bits on P7.

* Set PECEDP in LPCR when napping because of H_CEDE so guest doorbells
  will wake us up.

* Waking up from nap because of a guest doorbell interrupt is not a
  reason to exit the guest.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:10 +01:00
Paul Mackerras e3bbbbfa13 KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap
Currently in book3s_hv_rmhandlers.S we have three places where we
have woken up from nap mode and we check the reason field in SRR1
to see what event woke us up.  This consolidates them into a new
function, kvmppc_check_wake_reason.  It looks at the wake reason
field in SRR1, and if it indicates that an external interrupt caused
the wakeup, calls kvmppc_read_intr to check what sort of interrupt
it was.

This also consolidates the two places where we synthesize an external
interrupt (0x500 vector) for the guest.  Now, if the guest exit code
finds that there was an external interrupt which has been handled
(i.e. it was an IPI indicating that there is now an interrupt pending
for the guest), it jumps to deliver_guest_interrupt, which is in the
last part of the guest entry code, where we synthesize guest external
and decrementer interrupts.  That code has been streamlined a little
and now clears LPCR[MER] when appropriate as well as setting it.

The extra clearing of any pending IPI on a secondary, offline CPU
thread before going back to nap mode has been removed.  It is no longer
necessary now that we have code to read and acknowledge IPIs in the
guest exit path.

This fixes a minor bug in the H_CEDE real-mode handling - previously,
if we found that other threads were already exiting the guest when we
were about to go to nap mode, we would branch to the cede wakeup path
and end up looking in SRR1 for a wakeup reason.  Now we branch to a
point after we have checked the wakeup reason.

This also fixes a minor bug in kvmppc_read_intr - previously it could
return 0xff rather than 1, in the case where we find that a host IPI
is pending after we have cleared the IPI.  Now it returns 1.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:08 +01:00
Paul Mackerras 5557ae0ec7 KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8
This allows us to select architecture 2.05 (POWER6) or 2.06 (POWER7)
compatibility modes on a POWER8 processor.  (Note that transactional
memory is disabled for usermode if either or both of the PCR_TM_DIS
and PCR_ARCH_206 bits are set.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:06 +01:00
Michael Ellerman bd3048b80c KVM: PPC: Book3S HV: Add handler for HV facility unavailable
At present this should never happen, since the host kernel sets
HFSCR to allow access to all facilities.  It's better to be prepared
to handle it cleanly if it does ever happen, though.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:04 +01:00
Paul Mackerras ca25205513 KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8
POWER8 has 512 sets in the TLB, compared to 128 for POWER7, so we need
to do more tlbiel instructions when flushing the TLB on POWER8.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:02 +01:00
Michael Neuling b005255e12 KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs
This adds fields to the struct kvm_vcpu_arch to store the new
guest-accessible SPRs on POWER8, adds code to the get/set_one_reg
functions to allow userspace to access this state, and adds code to
the guest entry and exit to context-switch these SPRs between host
and guest.

Note that DPDES (Directed Privileged Doorbell Exception State) is
shared between threads on a core; hence we store it in struct
kvmppc_vcore and have the master thread save and restore it.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-27 16:01:00 +01:00