Commit Graph

86 Commits

Author SHA1 Message Date
Guenter Roeck f76992b00a hwmon: (pmbus/ltc2978) Add support for LTM4676
The chip's programming interface is quite similar to LTC3880
and supports the same set of sensors.

Reviewed-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-19 18:59:40 -07:00
Guenter Roeck a2e1510743 hwmon: (pmbus/ltc2978) Add new chip ID for LTC2974
LTC2974 datasheet revision C lists the chip ID for LTC2974 as 0x0213.

Reviewed-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-05 21:52:06 -08:00
Guenter Roeck daa436e67c hwmon: (pmbus) Support per-page exponent in linear mode
Some chips use different exponents for sensors on different pages
or rails. Detect and store exponent per page to support this situation.

This fixes a problem with wrong voltages seen on UCD90120.

Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-02-02 21:21:40 -08:00
Guenter Roeck 3f08d7f49f hwmon: (pmbus/ltc2978): Add support for LTC2978A
Detect LTC2978A chip ID. Treat it as LC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c24c407e96 hwmon: (pmbus/ltc2978): Add support for LTC2977
LTC2977 is a pin compatible replacement for LTC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c8ccab7ab5 hwmon: (pmbus/lm25066) Add support for LM25063
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:02 -07:00
LABBE Corentin 84fb029faa hwmon: Correct some typos
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:02 -07:00
Guenter Roeck c3b7cddc70 hwmon: (pmbus) Convert to use hwmon_device_register_with_groups
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-13 16:16:27 -07:00
Guenter Roeck af78fdf4a6 hwmon: (pmbus) Don't unnecessarily crash the kernel
pmbus code currently crashes the kernel if it detects an internal
implementation error. While the detected condition suggests that there
is a bug in the code, it is hardly fatal. Therefore, it should not
trigger a crash. Replace BUG() with WARN().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-13 16:16:26 -07:00
Jingoo Han a8b3a3a53f hwmon: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-11 22:10:39 -07:00
Guenter Roeck 58615a94f6 hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck e53e6497fc hwmon: (pmbus/lm25066) Refactor device specific coefficients
Initialize device specific coefficients from table instead of hard-coding it
to simplify adding additional chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck 2507abb3a7 hwmon: (pmbus/lm25066) Clamp limit attributes
Limits on all supported sensors and chips have to be within 0..0x0fff,
and limits are always positive.

Clamp written values in chip driver. Also clear value cache to ensure
that the actually written value is read back and reported correctly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck a7c69118bd hwmon: (pmbus/lm25066) Report VAUX as vmon
So far the driver reported the voltage on VAUX as "vout2". This was not
entirely appropriate as it is not an output voltage, and complicates
the code. Use the new virtual "VMON" register set and report the voltage
as "vmon" instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck fd9175d2f6 hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck 3d0d283993 hwmon: (pmbus/ltc2978) Code cleanup
Use u16 instead of int to store cached limit attributes.
This reduces allocated data size per driver instance by 48 bytes.
Use defines for the number of pages supported by individual chips.
Use ARRAY_SIZE for loops to initialize array variables, and
initialize all variables in the same code block.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck 8c958c703e hwmon: (pmbus/ltc2978) Fix temperature reporting
On LTC2978, only READ_TEMPERATURE is supported. It reports
the internal junction temperature. This register is unpaged.

On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported.
READ_TEMPERATURE is paged and reports external temperatures.
READ_TEMPERATURE2 is unpaged and reports the internal junction
temperature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.2+
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-14 09:03:51 -07:00
David Woodhouse 6975404fb9 hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
If krealloc() returns NULL, it *doesn't* free the original. So any code
of the form 'foo = krealloc(foo, …);' is almost certainly a bug.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-14 06:57:19 -07:00
Guenter Roeck f366fccd08 hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality
We read the chip ID from the chip, use it to determine if the chip ID provided
to the driver is correct, and report it if wrong. We should also use the
correct chip ID to select supported functionality.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.2+
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck dbd712c227 hwmon: (pmbus/ltc2978) Fix peak attribute handling
Peak attributes were not initialized and cleared correctly.
Also, temp2_max is only supported on page 0 and thus does not need to be
an array.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.2+
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck f880b12c18 hwmon: (pmbus) Clean up for code size reduction
Rearranged some data structures, and merged some common functions.
Overall code and data size reduction by more than 900 bytes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:07 -08:00
Guenter Roeck 50115ac9b6 hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer.
MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:06 -08:00
Guenter Roeck 16c6d01f3b hwmon: (pmbus) Add support for word status register
Not all PMBus devices support the byte status register at 0x78.
Try to use the word status register at 0x79 instead if that is the case.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck 1640eaecc4 hwmon: (pmbus/zl6100) Add support for VMON/VDRV
Some of the ZL6100 compatible chips support monitoring a separate voltage pin,
VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon.

The chips support implicit warning limits for VMON/VDRV, as percentage of the
respective critical voltage. Support by reading/writing the critical voltages
and calculating the associated warning voltages.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck ce603b18f3 hwmon: (pmbus) Add function to clear sensor cache
For PMBus chips, modifying one limit register may affect other limits.
Since limits are all cached in the PMBus core driver, related changes
are not reflected in reported limits.

Introduce function to clear the attribute cache. After calling this function,
the core pmbus driver re-reads all cached values.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:04 -08:00
Guenter Roeck aebcbbfc49 hwmon: (pmbus) Add support for additional voltage sensor
Some PMBus chips support monitoring an additional non-standard voltage. While
this voltage can in many cases be supported by simulating an additional sensor
page, this does not work in all cases. Specifically, it is problematic if the
data format is linear and the voltage is reported in LINEAR11 format. Since
output voltages use LINEAR16, and the exponent for LINEAR16 data is chip-wide
and fixed, this can result in overflows.

To solve this problem, add support for an additional virtual input voltage,
call it 'vmon', and treat this voltage as input voltage (which, when the chip
supports linear data format, uses LINEAR11).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:03 -08:00
Guenter Roeck 85cfb3a835 hwmon: (pmbus) Use krealloc to allocate attribute memory
So far, attribute memory was allocated by pre-calculating the maximum possible
amount of attributes. Not only does this waste memory, it is also risky because
the calculation might be wrong. It also requires a lot of defines to specify
the maximum number of attributes per class.

Allocate attribute memory using krealloc() instead. That means we have to use
kfree(), since devm_krealloc() does not exist, but that is still less costly
and less risky than trying to predict the number of attributes at the beginning.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:03 -08:00
Guenter Roeck e1e081a7e3 hwmon: (pmbus) Simplify memory allocation for sensor attributes
Since memory is now allocated with dev_ functions, we no longer need to keep
track of allocated memory. Sensor memory allocation can therefore be
simplified significantly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:02 -08:00
Guenter Roeck 663834f3b7 hwmon: (pmbus) Improve boolean handling
Boolean handling depends on storing the sensor data index in sensor_device_attr
as part of the index variable. This limits the number of sensor attributes to
256, and means the sensor sequence number actually has to be maintained to be
able to access sensor data from boolean functions.

Rework the code to store sensor pointers in the pmbus_boolean data structure
directly. With this approach, the number of supportable sensors is now
unlimited.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:01 -08:00
Guenter Roeck 0328461ea9 hwmon: (pmbus) Simplify memory allocation for labels and booleans
Since memory is now allocated with dev_ functions, we no longer need to keep
track of allocated memory. Memory allocation for booleans and labels can
therefore be simplified substantially by allocating it only as needed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:01 -08:00
Guenter Roeck c2a583519d hwmon: (pmbus) Use dev variable to represent client->dev
This simplifies the code and makes it a bit smaller.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:00 -08:00
Guenter Roeck 973018b1b7 hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error
Fix:
ERROR: Macros with multiple statements should be enclosed in a do - while loop

by unwinding the problematic macros.

As a side effect, this patch reduces code size on x86_64 by 160 bytes and bss
size by 64 bytes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:00 -08:00
Guenter Roeck 77493ef60f hwmon: (pmbus) Drop unnecessary error messages in probe error path
Drop error messages due to implementation errors and due to memory allocation
errors.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:59 -08:00
Guenter Roeck 2a844c148e hwmon: Replace SENSORS_LIMIT with clamp_val
SENSORS_LIMIT and the generic clamp_val have the same functionality,
and clamp_val is more efficient.

This patch reduces text size by 9052 bytes and bss size by 11624 bytes
for x86_64 builds.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: George Joseph <george.joseph@fairview5.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-01-25 21:03:54 -08:00
Kees Cook f2bab3eb41 hwmon: (pmbus) remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Guenter Roeck <linux@roeck-us.net>
CC: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-14 15:21:33 -07:00
Jean Delvare 0657777fce hwmon: Drop needless includes of <linux/delay.h>
These drivers use no sleep or delay functions so they don't need to
include <linux/delay.h>.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Rudolf Marek <r.marek@assembler.cz>
2012-10-10 15:25:57 +02:00
Jean Delvare dcd8f39230 hwmon: Add missing inclusions of <linux/jiffies.h>
Many hwmon drivers use jiffies but omit the inclusion of the header
file. Fix that, and also fix one driver which was including the header
file but didn't need it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Cc: Rudolf Marek <r.marek@assembler.cz>
2012-10-10 15:25:56 +02:00
Guenter Roeck d7ee11157f hwmon: (pmbus_core) Fix compiler warning
Some configurations produce the following compiler warning:

drivers/hwmon/pmbus/pmbus_core.c: In function 'pmbus_show_boolean':
drivers/hwmon/pmbus/pmbus_core.c:752: warning: 'val' may be used uninitialized in this function

While this is a false positive, it can easily be fixed by overloading the return
value from pmbus_get_boolean with both val and error return code (val is a
boolean and thus never negative).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-04-09 12:17:38 -07:00
Guenter Roeck 3360a106f8 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
ZL9101M and ZL9117M are compatible to ZL6100. Add support to the zl6100 driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:53 -07:00
Guenter Roeck 9271126966 hwmon: (adm1275) Add support for ADM1075
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck 590defe59e hwmon: (max34440) Add support for MAX34446
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck 60b873e332 hwmon: (pmbus) Add more virtual registers
Add PMBUS_VIRT_READ_TEMP_AVG, PMBUS_VIRT_READ_TEMP2_AVG,
PMBUS_VIRT_READ_POUT_AVG, PMBUS_VIRT_READ_POUT_MAX,
and PMBUS_VIRT_RESET_POUT_HISTORY.

We'll need those for MAX34446.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:51 -07:00
Guenter Roeck 216334094a hwmon: (pmbus) Add support for Lineage Power MDT040
MDT040 is supported by the generic PMBus driver. Add device ID and reference to
datasheet. Also mention Lineage Power device support in Kconfig.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck c5f35c9d82 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
TPS40400 and TPS40422 are supported by the generic PMBus driver.
Add device IDs and data sheet references.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck 56aad5d143 hwmon: (max34440) Add support for 'lowest' output voltage attribute
MAX34440 and compatibles support reporting the lowest measured output voltage.
Add support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:49 -07:00
Guenter Roeck dd285ad737 hwmon: (pmbus) Simplify remove functions
Since devm_kzalloc() is now used to allocate driver memory, the client
driver remove function has no purpose other than to call pmbus_do_remove().
This means we can get rid of it by redefining pmbus_do_remove() to use the
same prototype, and pointing to it directly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:46 -07:00
Guenter Roeck 8b313ca7f1 hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
Marginally less code and eliminate the possibility of memory leaks.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:45 -07:00
Axel Lin f0967eea80 hwmon: convert drivers/hwmon/* to use module_i2c_driver()
This patch converts the drivers in drivers/hwmon/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
Cc: David George <david.george@ska.ac.za>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:26:50 -07:00
Guenter Roeck 0117c3f245 hwmon: (pmbus) Replace strict_strtol with kstrtol
strict_strtol is deprecated and results in a checkpatch warning.
Replace it with kstrtol.

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:26:43 -07:00
Guenter Roeck fecfb64422 hwmon: (zl6100) Enable interval between chip accesses for all chips
Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani <vgani@intersil.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-14 09:17:03 -07:00