Commit Graph

173 Commits

Author SHA1 Message Date
Linus Torvalds 28e4b22495 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)
2006-06-21 11:18:25 -07:00
David S. Miller c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
Christoph Hellwig beb4048750 [SCSI] remove scsi_request infrastructure
With Achim patch the last user (gdth) is switched away from scsi_request
so we an kill it now.  Also disables some code in i2o_scsi that was
broken since the sg driver stopped using scsi_requests.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:24:40 -05:00
Michael Reed 1951d099df [SCSI] mptfusion: change driver revision to 3.03.10
Bump driver version number to reflect addition of various
fibre channel patches.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:02:21 -05:00
Michael Reed d6be06c84d [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
The driver uses msleep_interruptible() in the code path responsible
for resetting the card's ports via the lsiutil command.  If a
<ctrl-c> is received during the reset it can leave a port in such
a state that the only way to regain its use is to reboot the system.
Changing from msleep_interruptible() to msleep() corrects the problem.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:01:52 -05:00
Michael Reed 419835e285 [SCSI] mptfc: fix fibre channel infinite request/response loop
While doing board reset testing I was able to put the system in
an infinite request/response loop between the scsi layer and
mptscsih_qcmd() by aborting the reset.  This patch installs
a "SETUP RESET" handler which calls fc_remote_port_delete()
for all registered rports.  This blocks the target which
prevents the loop.  Additionally, should the reset fail to
complete, the transport will now terminate i/o to the target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:00:03 -05:00
Michael Reed ca2f938efe [SCSI] mptfc: set fibre channel fw target missing timers to one second
The fibre channel firmware provides a timer which is similar in purpose
to the fibre channel transport's device loss timer.  The effect of this
timer is to extend the total time that a target will be missing beyond
the value associated with the transport's timer.  This patch changes
the firmware timer to a default of one second which significantly reduces
the lag between when a target goes missing and the notification of the
fibre channel transport.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 15:59:19 -05:00
Michael Reed 80d3ac77a8 [SCSI] mptfusion: move fc event/reset handling to mptfc
Move fibre channel event and reset handling to mptfc.  This will
result in fewer changes over time that need to be applied to
either mptbase.c or mptscsih.c.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 15:58:37 -05:00
James Bottomley f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Linus Torvalds 1f4d4a7e8f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Avoid JBUS errors on some Niagara systems.
  [FUSION]: Fix mptspi.c build with CONFIG_PM not set.
  [TG3]: Handle Sun onboard tg3 chips more correctly.
  [SPARC64]: Dump local cpu registers in sun4v_log_error()
2006-06-10 11:03:51 -07:00
Markus Lidel 57a62fed87 [PATCH] I2O: Bugfixes to get I2O working again
From: Markus Lidel <Markus.Lidel@shadowconnect.com>

- Fixed locking of struct i2o_exec_wait in Executive-OSM

- Removed LCT Notify in i2o_exec_probe() which caused freeing memory and
  accessing freed memory during first enumeration of I2O devices

- Added missing locking in i2o_exec_lct_notify()

- removed put_device() of I2O controller in i2o_iop_remove() which caused
  the controller structure get freed to early

- Fixed size of mempool in i2o_iop_alloc()

- Fixed access to freed memory in i2o_msg_get()

See http://bugzilla.kernel.org/show_bug.cgi?id=6561

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10 11:02:05 -07:00
Tom "spot" Callaway c29ca9d181 [FUSION]: Fix mptspi.c build with CONFIG_PM not set.
Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09 17:01:48 -07:00
Vivek Goyal 9bf0a28c9a [SCSI] kdump: mpt fusion driver initialization failure fix
MPT fusion driver initialization fails while second kernel is booting,
after a system crash (if kdump kernel is configured).  Oops message is
pasted below.

*****************************************************************************
Fusion MPT base driver 3.03.08
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.03.08 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
mptbase: Initiating ioc0 bringup
BUG: unable to handle kernel paging request at virtual address 00002608
 printing eip:
c11782fd
*pde = 00000000
Oops: 0000 [#1]
Modules linked in:
CPU:    0
EIP:    0060:[<c11782fd>]    Not tainted VLI
EFLAGS: 00010046   (2.6.17-rc1-16M #2)
EIP is at mptscsih_io_done+0x27/0x3a3
eax: c4fed000   ebx: c4fed000   ecx: 00002600   edx: 00000298
esi: c11782d6   edi: 00002600   ebp: 00000000   esp: c1332f74
ds: 007b   es: 007b   ss: 0068
Process swapper (pid: 0, threadinfo=c1332000 task=c128f9c0) Stack: <0>0000006c 00000020 00000298 00002600 c4fed000 c4fed000 c11782d6 0000260 0
       00000000 c1172c49 c4fed000 c1305b40 00000005 00000000 c1172d75 c48877e0
       c1029687 00000000 c1307fb8 00000000 c1305a00 00000001 00000000 c1307fb8
Call Trace:
 <c11782d6> mptscsih_io_done+0x0/0x3a3   <c1172c49> mpt_turbo_reply+0xbb/0xd3
 <c1172d75> mpt_interrupt+0x22/0x2b   <c1029687> misrouted_irq+0x63/0xcb
 <c10297b3> note_interrupt+0x43/0x98   <c10292f9> __do_IRQ+0x68/0x8f
 <c1003fac> do_IRQ+0x36/0x4e
 =======================
 <c1002aa6> common_interrupt+0x1a/0x20   <c1001150> mwait_idle+0x1a/0x2a
 <c10010bf> cpu_idle+0x40/0x5c   <c1308610> start_kernel+0x17a/0x17c Code: 5e 5f 5d c3 55 89 cd 57 56 53 83 ec 14 89 54 24 0c 89 44 24 10 8b 90 cc 00  00 00 8b 4c 24 0c 81 c2 98 02 00 00 85 ed 89 54 24 08 <0f> b7 79 08 89 fe 74 04  0f b7 75 08 66 39 f7 75 0d 8b 44 24 0c
*******************************************************************************

o Kdump capture kernel boot fails during initialization of MPT fusion driver.
  (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 01))

o Problem is easily reproducible, if system crashed while some disk activity
  like cp operation was going on.

o After a system crash, devices are not shutdown and capture kernel starts
  booting while skipping BIOS. Hence underlying device is left in operational
  state. In this case scsi contoller was left with interrupt line asserted
  reply FIFO was not empty. When driver starts initializing in the second
  kernel, it receives the interrupt the moment request_irq() is called.
  Interrupt handler, reads the message from reply FIFO and tries to access
  the associated message frame and panics, as in the new kernel's context
  that message frame is not valid at all.

o In this scenario, probably we should delay the request_irq() call. First
  bring up the IOC, reset it if needed and then should register for irq.

o I have tested the patch with SAS1064E and 53c1030 controllers.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-31 10:33:49 -05:00
James Bottomley 4ff42a669a [SCSI] mptspi: reset handler shouldn't be called for other bus protocols
All registered reset callback handlers are called during reset processing.
The mptspi modules has its own reset callback handler, just recently
added for issuing domain validation after host reset.  If either the mptsas or
mptfc driver are loaded, this callback could be called. Thus resulting
in domain validation being issued for sas or fibre end devices.

Fix this by having mptbase.c check the bus type against the driver
type and only call the reset handler if they match (or if it's a
non-bus specific reset handler).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-19 16:43:08 -05:00
mdr@sgi.com 6dd727da92 [SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc
A race condition exists in mptfc between the thread registering a device
with the fc transport and the scan work generated by the transport.
This race existed prior to the application of the mptfc bug fix patch.

mptfc_register_dev() calls fc_remote_port_add() with the FC_RPORT_ROLE_TARGET
bit set in the rport ids passed to the function.  Having this bit set causes
fc_remote_port_add() to schedule a scan of the device.

This scan can execute before mptfc_register_dev() can fill in the dd_data
in the rport structure.  When this happens, mptfc_target_alloc() will fail
because dd_data is null.

Attached is a patch which fixes the problem.  The patch changes the rport ids
passed to fc_remote_port_add() to not have the TARGET bit set.  This prevents
the scan from being scheduled.  After mptfc_register_dev() fills in the rport
dd_data field, fc_remote_port_rolechg() is called, changing the role of the
rport to TARGET.  Thus, the scan is scheduled after dd_data is filled
in which prevents the failure in mptfc_target_alloc().

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10 09:54:42 -05:00
Eric Moore 6e1cad0276 [SCSI] mptspi: revalidate negotiation parameters after host reset and resume
This is a bug fix for mptspi driver, where after a host reset or
resume, we revalidate the negotiation parameters for all devices.
This bug was introduced when the driver was ported to use the spi
transport layer.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-03 12:11:51 -05:00
Eric Moore 509e5e5d20 [SCSI] fusion - bug fix stack overflow in mptbase
Bug fix for stack overflow in EventDescriptionStr, (a function
for debuging firmware events).  We allocated 50 bytes on local stack
for buff[], however there are places in the code where we've attempted
copying in greater than 50 bytes into buff[].

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-27 13:59:30 -05:00
Moore, Eric 65207fedcf [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
mptbase.h

	bump version number to 3.03.09

	remove unneeded flags
	define workq and remove old fc specific locks

mptbase.c

	initialize new lock and don't initialize two removed locks

mptscsih.c

	when firmware reports target is no longer there, return
        DID_REQUEUE for fc hosts so that i/o doesn't get killed until
        the transport has an opportunity to manage the loss via its
        dev loss timer

	when the "eh_abort" routine is called, check to see if the
        driver has the command or not before looking to see if a reset
        is pending.  James Smart and I talked about this and believe
        that the API for this routine is: if driver doesn't have
        command, return SUCCESS.  This change helps prevent a target
        from being taken offline.  SUCCESS is returned because it's
        likely that the command completed after error recovery timed
        it out but before it could be aborted.

	provide a routine to queue work to newly created workq, and
        use it.

	remove "ioc" from mptscsih_abort() it was only used one time.
	the other references were via hd->ioc, so I just moved it....
	net change in references to ioc via hd->ioc is zero

	move hd->resetPending test and hd->timeouts increment to after
	the test for whether the command to be aborted remains known
	to the driver

	Make certain that the workq exists before queuing work to it.

mptfc.c

	no longer need to lock rport data structures as I was able to
	single thread the code!  I fixed up the debug code to
	eliminate compilation messages due to type mismatch in the
	printk.  Got rid of some no longer needed rport flags.
	Initialize and destroy the workq used for the rescan work.

	simplify the logic regarding the increment of
        fc_rescan_work_count.  use post increment and test for zero
        vs. pre increment and test for one; eliminate work_count
        variable: queue_work can be called with the work_lock held as
        it doesn't sleep

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:07:32 -05:00
Moore, Eric bd23e94cd7 [SCSI] mptfusion: bug fix's for raid components adding/deleting
This patch handles case where raid hidden components
are not being removed when power turned off to device
attached to expander, as well as the case of
exposing raid components when power is turned back on
to devices attached to an expander.  (This is a repost
of this patch, with  mptsas_is_end_device declared
further up in the code.)

This patch contains some other miscellaneous bug fix's.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:00:39 -05:00
Moore, Eric 3c0c25b97c [SCSI] mptfusion - fix panic in mptsas_slave_configure
Driver panic when RAID logical volume was present when driver
loaded, or when a RAID logical volume was created on the fly.

This issue was created in due to recent scsi_transport_sas change,
when sas_read_port_mode_page was added into the mptsas drivers
slave_config entry point.

This new API expects that all sdev's to be assocated to an rphy, however
that is not the case for logical volumes, as they are created using
scsi_add_device, instead of sas_rphy_add().

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 09:35:12 -05:00
Arjan van de Ven 99ac48f54a [PATCH] mark f_ops const in the inode
Mark the f_ops members of inodes as const, as well as fix the
ripple-through this causes by places that copy this f_ops and then "do
stuff" with it.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:05 -08:00
Matthew Dobson 93d2341c75 [PATCH] mempool: use mempool_create_slab_pool()
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.

Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:00 -08:00
Vasily Averin 30087baf88 [PATCH] i2o_dump_hrt() output cleanup
This patch fixes i2o_dump_hrt output from dmesg:

iop0: HRT has 1 entries of 16 bytes each.
Adapter 00000012: <7>TID 0000:[<7>H<7>P<7>C<7>*<7>]:<7>PCI 1: Bus 1 Device 22
Function 0<7>

Signed-off-by: Vasily Averin <vvs@sw.ru>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:58 -08:00
James Bottomley f013db3284 [SCSI] convert mptsas over to end_device/expander allocations
The conversion of mptsas should allow the elimination of the contained
flag in the sas transport class.

Acked-by: "Moore, Eric" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-19 10:20:45 -06:00
Moore, Eric 9dec70e053 [SCSI] fusion - bump version
version bump

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:35:34 -06:00
Moore, Eric e6b2d76a49 [SCSI] fusion - expander hotplug suport in mptsas module
This adds support for hot adding and removing
expanders, and its associated attached devices.
When there is a change in topology,
the fusion firmware sends the
MPI_EVENT_SAS_DISCOVERY event to the driver.
The driver will read firmware config pages
to determine what changes took place, and refresh
drivers view of the world stored in ioc->sas_topology.

Here is the details of the action the driver does:

(1) Expander Added :  The mptsas_discovery_work
workqueue is called.  Config pages read, and
ioc->sas_topology is refreshed.  The sas_phy_add()
is called for each phy of the expander.  The
expanders attached devices are added via
sas_rphy_add().  Added end devices are handled within
the MPT_ADD_DEVICE logic in  mptsas_hotplug_work
workqueue.

(2) Expander Delete : The sas_rphy_delete() will be
called for the top most compenent of the parent that the
expander is attached to.  The sas_rphy_delete call
will delete all the children phys, rphys, and end devices.
This is handled from mptsas_discovery_work workqueue.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:35:17 -06:00
Moore, Eric f44e5461d9 [SCSI] fusion - exposing raid components in mptsas
Suppport for exposing hidden raid components
for sg interface. The sdev->no_uld_attach flag
will set set accordingly.

The sas module supports adding/removing raid
volumes using online storage management application
interface.

This patch rely's on patch's provided to me
by Christoph Hellwig, that exports device_reprobe.
I will post those patch's on behalf of Christoph.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:35:01 -06:00
Moore, Eric db9c9174e4 [SCSI] fusion - memory leak, and initializing fields
Changelog:
(1) fix memory leak: p->phy_info
(2) initialize device_info and port_info data fields
(3) initialize the hba firmware handle
(4) initialize phy_id for attached phy_info data fields
(5) initialize attached phy_info data fields

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:34:45 -06:00
Moore, Eric 52435430fc [SCSI] fusion - exclosure misspelled
exclosure should be enclosure

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:34:25 -06:00
Moore, Eric 4b766471e3 [SCSI] fusion - cleanup mptsas event handling functions
Cleanup of mptsas firmware event handlers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:34:08 -06:00
Moore, Eric 914c2d8e59 [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
It makes no sense in keeping the target_id and bus_id
in the VirtDevice structure, when it can be obtained
from the VirtTarget structure.

In addition, this patch fix's couple compilation bugs
in mptfc.c when MPT_DEBUG_FC is enabled. This
provided by Micheal Reed.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:33:38 -06:00
Moore, Eric c972c70fa0 [SCSI] fusion - static fix's
Patch previously provided from Adrian Bunk <bunk@stusta.de>,
moving some functions to static.  This is already in
the -mm tree.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:33:18 -06:00
Moore, Eric 3a892bef3f [SCSI] fusion - move some debug firmware event debug msgs to verbose level
Created a debug level MPT_DEBUG_VERBOSE_EVENTS.
Moving some of the more vebose debug messages
for firwmare events into new debug level.  Also
added some more firmware events descriptions.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:27:43 -06:00
Moore, Eric 5bf52c4fda [SCSI] fusion - loginfo header update
This header is provided to better understand
loginfo codes returned by the mpt fusion firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:27:21 -06:00
James Bottomley ce313db240 [SCSI] mptscsih: remove unused page 1 setting function
It was actually rendered unused by the move to the spi transport
class, but never taken out.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 10:02:15 -06:00
Vasily Averin 071a651e28 [SCSI] i2o: fix memory leak in i2o_exec_lct_modified
i2o_exec_lct_modified() does not release memory allocated for work_struct.

Signed-off-by: Vasily Averin <vvs@sw.ru>

Although your patch is the same, i've rewritten it a little bit for
naming consistency in the I2O driver.

Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 08:53:16 -06:00
James Bottomley c92f222e1f [SCSI] mptspi: Add transport class Domain Validation
This is the first half of a patch to add the generic domain validation
to mptspi.  It also creates a secondary "virtual" channel for raid
component devices since these are now exported with no_uld_attach.

What Eric and I would have really liked is to export all physical
components on channel 0 and all raid components on channel 1.
Unfortunately, this would result in device renumbering on platforms with
mixed RAID/Physical devices which was considered unacceptable for
userland stability reasons.

Still to be done is to plug back the extra parameter setting and DV
pieces on reset and hotplug.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01 09:44:04 -06:00
Christoph Hellwig e3094447e0 [SCSI] mptsas: add support for enclosure and bay identifier attributes
Adds support to retrieve the enclosure and bay identifiers.  This patch
is from Eric with minor modifications from me, rewritten from a buggy
patch of mine, based on the earlier CSMI implementation from Eric..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:12 -06:00
Adrian Bunk 03fbcbcd57 [SCSI] drivers/message/fusion/mptfc.c: make 2 functions static
This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:06 -06:00
Moore, Eric 4f8d98abaf [SCSI] fusion - mptlan - remove wierd humor print
Removes wierd humor, and bad language printk in mptlan.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:04 -06:00
Linus Torvalds 26d451b603 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2006-02-16 12:47:44 -08:00
Markus Lidel e22bec266c [PATCH] Fix i2o_scsi oops on abort
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923

When a scsi command failed, an oops would result.

Back-to-back SMART queries would make the Seagate drives unhappy.  The
second SMART query would timeout, and the command would be aborted.

Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Kenny Simpson <theonetruekenny@yahoo.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05 11:06:51 -08:00
Moore, Eric ea5a7a82f9 [SCSI] fusion - mptctl -adding asyn event notification support
Adding aen support.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:33:24 -06:00
Moore, Eric 946cbf040a [SCSI] fusion - mptctl -firmware download fix
Fix's firmware download ioctl to work with SAS.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:33:07 -06:00
Moore, Eric 592f9c2fc9 [SCSI] fusion - mptctl - backplane istwi fix
Moving the toolbox call from mptbase.c, over to
mptctl.c, and using the mptctl infastructure to issue
the call.  The existing code is hanging on certain HP platforms
when this ioctl is issued, and this patch fix's that.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:32:51 -06:00
Moore, Eric 5f07e2499d [SCSI] fusion - mptctl -sense width fix
Bug fix for correctly setting sense width
for the MPTCOMMAND ioctl.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:32:32 -06:00
Moore, Eric 5b5ef4f617 [SCSI] fusion - mptctl - Event Log Fix
Use the hard coded value MPTCTL_EVENT_LOG_SIZE to fix
bug where in certain cases, the ioc->eventLogSize was
initialized.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:32:18 -06:00
Moore, Eric 86a7dcaae9 [SCSI] fusion - mtctl - change to wait_event_timeout
Change from using wait_event_interruptible_timeout to
wait_event_timeout.  Also delete white space and duplicate
line of code.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:31:50 -06:00
Moore, Eric 9cc1cfbc67 [SCSI] fusion - mptctl - adding support for bus_type=SAS
Add bus_type recognization in ioctl path for SAS.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:31:29 -06:00
Moore, Eric 096f7a2a09 [SCSI] fusion - mptctl - MPTCOMMAND - adding function types.
This adds support for new function types in
the existing MPTCOMMAND ioctl.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:31:12 -06:00