Commit Graph

31 Commits

Author SHA1 Message Date
Aneesh Kumar K.V 62d810b424 fs/9p: We need not writeback dirty pages during close
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-03-15 09:57:38 -05:00
Venkateswararao Jujjuri (JV) b165d60145 9p: Add datasync to client side TFSYNC/RFSYNC for dotl
SYNOPSIS
    size[4] Tfsync tag[2] fid[4] datasync[4]

    size[4] Rfsync tag[2]

DESCRIPTION

    The Tfsync transaction transfers ("flushes") all modified in-core data of
    file identified by fid to the disk device (or other  permanent  storage
    device)  where that  file  resides.

    If datasync flag is specified data will be fleshed but does not flush
    modified metadata unless  that  metadata  is  needed  in order to allow a
    subsequent data retrieval to be correctly handled.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:49 -05:00
Sripathi Kodi 8812a3d5f8 9p: Pass the correct end of buffer to p9dirent_read
A patch was accepted recently for sending correct buffer size to p9stat_read.
We need a similar patch in v9fs_dir_readdir_dotl to send correct end of buffer
to p9dirent_read.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:44 -05:00
jvrao 62726a7ab3 9p: Check for NULL fid in v9fs_dir_release()
NULL fid should be handled in cases where we endup calling v9fs_dir_release()
before even we instantiate the fid in filp.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-13 08:13:03 -05:00
Sripathi Kodi 7751bdb3a0 9p: readdir implementation for 9p2000.L
This patch implements the kernel part of readdir() implementation for 9p2000.L

    Change from V3: Instead of inode, server now sends qids for each dirent

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.

    This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
    This function sends P9_TREADDIR command to the server. In response the server
    sends a buffer filled with dirent structures. This is different from the
    existing v9fs_dir_readdir() call which receives stat structures from the server.
    This results in significant speedup of readdir() on large directories.
    For example, doing 'ls >/dev/null' on a directory with 10000 files on my
    laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
    with the new readdir.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:07 -05:00
Latchesar Ionkov da7ddd3296 9p: Pass the correct end of buffer to p9stat_read
Pass the correct end of the buffer to p9stat_read.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-07-27 14:52:04 -05:00
Sripathi Kodi 9b6533c9b3 9p: VFS switches for 9p2000.L: VFS switches
Implements VFS switches for 9p2000.L protocol.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:33 -05:00
Linus Torvalds 749d229761 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: saving negative to unsigned char
  9p: return on mutex_lock_interruptible()
  9p: Creating files with names too long should fail with ENAMETOOLONG.
  9p: Make sure we are able to clunk the cached fid on umount
  9p: drop nlink remove
  fs/9p: Clunk the fid resulting from partial walk of the name
  9p: documentation update
  9p: Fix setting of protocol flags in v9fs_session_info structure.
2010-04-05 13:42:54 -07:00
Dan Carpenter 85a770a888 9p: return on mutex_lock_interruptible()
If "err" is -EINTR here the original code calls mutex_unlock() and then
returns, but it should just return directly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
2010-04-05 14:32:33 -05:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Aneesh Kumar K.V fae4528b23 fs/9p: re-init the wstat in readdir loop
This ensure that on failure when we free the stat buf we don't end up
freeing an already freed pointer in the earlier loop

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 08:57:29 -06:00
Sripathi Kodi 342fee1d5c 9P2010.L handshake: Remove "dotu" variable
Removes 'dotu' variable and make everything dependent
on 'proto_version' field.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:42 -06:00
Eric Van Hensbergen 3e2796a90c 9p: fix readdir corner cases
The patch below also addresses a couple of other corner cases in readdir
seen with a large (e.g. 64k) msize.  I'm not sure what people think of
my co-opting of fid->aux here.  I'd be happy to rework if there's a better
way.

When the size of the user supplied buffer passed to readdir is smaller
than the data returned in one go by the 9P read request, v9fs_dir_readdir()
currently discards extra data so that, on the next call, a 9P read
request will be issued with offset < previous offset + bytes returned,
which voilates the constraint described in paragraph 3 of read(5) description.
This patch preseves the leftover data in fid->aux for use in the next call.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-11-02 08:43:45 -06:00
Martin Stava f91b90993f 9p: fix a small bug in readdir for long directories
Here is a proposed patch for bug in readdir. Listing of dirs with
many files fails without this patch.

Signed-off-by: Martin Stava <martin.stava@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-11-02 08:43:44 -06:00
Eric Van Hensbergen 02da398b95 9p: eliminate depricated conv functions
Remove depricated conv functions which have been replaced with new 
protocol routines.

This patch also reworks the one instance of the file-system code which
directly calls conversion routines (to accomplish unpacking dirreads).

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:06:57 -05:00
Eric Van Hensbergen 51a87c552d 9p: rework client code to use new protocol support functions
Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:45 -05:00
Eric Van Hensbergen 06b55b464e 9p: move dirread to fs layer
Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation 
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a 
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Al Viro 59af1584bf [PATCH] fix ->llseek() for a bunch of directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-25 01:18:09 -04:00
Eric Van Hensbergen ee443996a3 9p: Documentation updates
The kernel-doc comments of much of the 9p system have been in disarray since
reorganization.  This patch fixes those problems, adds additional documentation
and a template book which collects the 9p information.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-05-14 19:23:25 -05:00
Latchesar Ionkov bd238fb431 9p: Reorganization of 9p file system code
This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p.
It moves the transport, packet marshalling and connection layers to net/9p
leaving only the VFS related files in fs/9p.  This work is being done in
preparation for in-kernel 9p servers as well as alternate 9p clients (other
than VFS).

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14 15:13:40 -05:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Josef "Jeff" Sipek d6f787bcee [PATCH] 9p: change uses of f_{dentry,vfsmnt} to use f_path
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the 9p
filesystem.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:43 -08:00
Al Viro 914e26379d [PATCH] severing fs.h, radix-tree.h -> sched.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:24 -05:00
Arjan van de Ven 4b6f5d20b0 [PATCH] Make most file operations structs in fs/ const
This is a conversion to make the various file_operations structs in fs/
const.  Basically a regexp job, with a few manual fixups

The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:06 -08:00
Eric Van Hensbergen 42e8c509cf [PATCH] v9fs: update license boilerplate
Update license boilerplate to specify GPLv2 and remove the (at your option
clause).  This change was agreed to by all the copyright holders (approvals
can be found on v9fs-developer mailing list).

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:54 -08:00
Eric Van Hensbergen 8532159f55 [PATCH] v9fs: fix overzealous dropping of dentry which breaks dcache
There is a d_drop in dir_release which caused problems as it invalidates
dcache entries too soon.  This was likely a part of the wierd cwd behavior
folks were seeing.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17 07:51:25 -08:00
Latchesar Ionkov 531b1094b7 [PATCH] v9fs: zero copy implementation
Performance enhancement reducing the number of copies in the data and
stat paths.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:06 -08:00
Latchesar Ionkov 3cf6429a26 [PATCH] v9fs: new multiplexer implementation
New multiplexer implementation. Decreases the number of kernel threads
required. Better handling when the user process receives a signal.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:05 -08:00
OGAWA Hirofumi 28fd129827 [PATCH] Fix and add EXPORT_SYMBOL(filemap_write_and_wait)
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it.

See mm/filemap.c:

And changes the filemap_write_and_wait() and filemap_write_and_wait_range().

Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite()
returns error.  However, even if filemap_fdatawrite() returned an
error, it may have submitted the partially data pages to the device.
(e.g. in the case of -ENOSPC)

<quotation>
Andrew Morton writes,

If filemap_fdatawrite() returns an error, this might be due to some
I/O problem: dead disk, unplugged cable, etc.  Given the generally
crappy quality of the kernel's handling of such exceptions, there's a
good chance that the filemap_fdatawait() will get stuck in D state
forever.
</quotation>

So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO.

Trond, could you please review the nfs part?  Especially I'm not sure,
nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not.

Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:47 -08:00
Latchesar Ionkov 0b8dd17762 [PATCH] v9fs: fix races in fid allocation
Fid management cleanup.  The patch attempts to fix the races in dentry's
fid management.

Dentries don't keep the opened fids anymore, they are moved to the file
structs.  Ideally there should be no more than one fid with fidcreate equal
to zero in the dentry's list of fids.

v9fs_fid_create initializes the important fields (fid, fidcreated) before
v9fs_fid is added to the list.  v9fs_fid_lookup returns only fids that are
not created by v9fs_create.  v9fs_fid_get_created returns the fid created
by the same process by v9fs_create (if any) and removes it from dentry's
list

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:40 -07:00
Eric Van Hensbergen e69e7fe5b0 [PATCH] v9fs: VFS file, dentry, and directory operations
This part of the patch contains the VFS file, dentry & directory interfaces.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:56 -07:00