The amplc_pc236 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured. This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The amplc_dio200 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured. This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".
The original patch is by Nicholas Nell.
-----
Advantech PCI-1739U support
Hello,
I've added a bit of simple configuration to adv_pci_dio.c in order to
make the PCI-1739U work with the adv_pci_dio driver. I have tested
inputs only so far but they seem to work. A git style patch is
attached.
Thanks,
--
Nicholas Nell
Professional Research Assistant
University of Colorado
-----
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Nico Nell <nicholas.nell@colorado.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a new driver file usbduxsigma which is the driver for
a new board by ITL. The driver has been tested and is working fine.
Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add dyna_pci10xx entry to comedi Kconfig and Makefile
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some platforms do not have virt_to_bus(), so properly depend on
CONFIG_VIRT_TO_BUS for the Comedi drivers that need this function.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On architectures that don't define PAGE_KERNEL_NOCACHE, the Comedi driver turns
into tragedy:
CC [M] drivers/staging/comedi/drivers.o
drivers/staging/comedi/drivers.c: In function ‘comedi_buf_alloc’:
drivers/staging/comedi/drivers.c:505:41: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function)
drivers/staging/comedi/drivers.c:505:41: note: each undeclared identifier is rep orted only once for each function it appears in
make[3]: *** [drivers/staging/comedi/drivers.o] Error 1
Restrict the driver to only those architectures that define PAGE_KERNEL_NOCACHE.
PAGE_KERNEL_NOCACHE is a kludge - some system architectures such as SGI IP27
are even uable to offer uncached operation - at least in the way an unwitting
driver might assume. I haven't looked in details how the driver is using
the area vmaped with PAGE_KERNEL_NOCACHE but maybe doing it XFS-style using
cached memory and the flush_kernel_vmap_range / invalidate_kernel_vmap_range
APIs in conjunction with the DMA API is a practical alternative.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: David Miller <davem@davemloft.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ni_tio and ni_tio modules do not depend on the 8255 module, but the
ni_atmio, ni_mio_cs and ni_pcimio modules do need the 8255 module. The
ni_pcimio module also needs the comedi_fc module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the dependancy of ni_labpc on mite was missing,
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
index 0aa2b0d..79f5f2e 100644
On Wed, 19 May 2010, Randy Dunlap wrote:
> linux-next of 2010-0519:
> when CONFIG_PCI is not enabled:
>
> drivers/staging/comedi/drivers/mite.c: In function 'mite_init':
> drivers/staging/comedi/drivers/mite.c:89: error: implicit declaration of function 'pci_dev_get'
> drivers/staging/comedi/drivers/mite.c:89: warning: assignment makes pointer from integer without a cast
> make[5]: *** [drivers/staging/comedi/drivers/mite.o] Error 1
This patch fixes the problem.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Both drivers support directly or indirectly multiple bus types,
hence both are listed independent of bus types.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are three minor changes I would like to do on my last patch:
* Comedi is formally not dependant on any hardware, e.g. it is possible
to use comedi_test without (PCI || PCMCIA || PCCARD || USB || ISA)
* comedi_parport is not dependant on PARPORT_PC.
* indirect ni_mio_cs (16-bit PCMCIA) dependancy on mite PCI-chip may
confuse users, thus changing COMEDI_NI_TIO depends on COMEDI_MITE
to select COMEDI_MITE.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
PC/104-drivers went into ISA,
PC/104+ went into PCI,
Drivers without a bustype went into "misc".
In doubt drivers supporting both ISA/PCI went into PCI.
Drivers without any detailed hardware info went into ISA, e.g. fl512.c
Some NI drivers are used by other NI drivers from different bustypes
are grouped seperately in NI_COMMON.
[tweaked by gregkh to handle the new driver recently added]
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@speakeasy.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This should fix the problem of comedi drivers showing up on arches that
can not support the comedi subsystem (like s390).
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add PCCARD dependancy to the PCMCIA drivers to fix build breakage.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes the unused RT code from the comedi subsystem.
A lot of drivers needed to then include interrupt.h on their own, as they
were picking it up through the comedi_rt.h inclusion.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds all of the recently added drivers to the build system.
Also splits out the pcmcia drivers so we don't get build errors when we
don't want to.
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch moves CONFIG_COMEDI_DEBUG to Kconfig and cleans up the code
as it didn't actually compile with debug enabled.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
comedi doesn't like being built into the kernel right now, so force it
to be a module.
Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds two "generic" Kconfig options, one for PCI and one for USB
comedi drivers, and the Makefile infrastructure as well. This is so
we can start adding individual comedi drivers and add them to the build
properly.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the Comedi core to the staging tree.
This is a data acquision infrastructure for Linux, providing a common
interface for these types of drivers.
Taken directly from the comedi git tree, with only minor tweaks
by Greg to get it to build properly within the kernel tree.
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott
Bernd Porr
Prashant P. Shah
Greg Kroah-Hartman
Ralf Baechle
Alexander Kurz
Alexander Kurz
Frank Mori Hess
Linus Torvalds
Mariusz Kozlowski
Matt LaPlante
David Schleef