Commit Graph

19418 Commits

Author SHA1 Message Date
Jeff Layton 7332f2a621 cifs: eliminate some more premature cifsd exits
If the tcpStatus is still CifsNew, the main cifs_demultiplex_loop can
break out prematurely in some cases. This is wrong as we will almost
always have other structures with pointers to the TCP_Server_Info. If
the main loop breaks under any other condition other than tcpStatus ==
CifsExiting, then it'll face a use-after-free situation.

I don't see any reason to treat a CifsNew tcpStatus differently than
CifsGood. I believe we'll still want to attempt to reconnect in either
case. What should happen in those situations is that the MIDs get marked
as MID_RETRY_NEEDED. This will make CIFSSMBNegotiate return -EAGAIN, and
then the caller can retry the whole thing on a newly reconnected socket.
If that fails again in the same way, the caller of cifs_get_smb_ses
should tear down the TCP_Server_Info struct.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:22:33 +00:00
Jeff Layton 522bbe65a2 cifs: prevent cifsd from exiting prematurely
When cifs_demultiplex_thread exits, it does a number of cleanup tasks
including freeing the TCP_Server_Info struct. Much of the existing code
in cifs assumes that when there is a cisfSesInfo struct, that it holds a
reference to a valid TCP_Server_Info struct.

We can never allow cifsd to exit when a cifsSesInfo struct is still
holding a reference to the server. The server pointers will then point
to freed memory.

This patch eliminates a couple of questionable conditions where it does
this.  The idea here is to make an -EINTR return from kernel_recvmsg
behave the same way as -ERESTARTSYS or -EAGAIN. If the task was
signalled from cifs_put_tcp_session, then tcpStatus will be CifsExiting,
and the kernel_recvmsg call will return quickly.

There's also another condition where this can occur too -- if the
tcpStatus is still in CifsNew, then it will also exit if the server
closes the socket prematurely.  I think we'll probably also need to fix
that situation, but that requires a bit more consideration.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:22:30 +00:00
Steve French 4266d9118f [CIFS] ntlmv2/ntlmssp remove-unused-function CalcNTLMv2_partial_mac_key
This function is not used, so remove the definition and declaration.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:17:29 +00:00
Jeff Layton 639e7a913d cifs: eliminate redundant xdev check in cifs_rename
The VFS always checks that the source and target of a rename are on the
same vfsmount, and hence have the same superblock. So, this check is
redundant. Remove it and simplify the error handling.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-08 21:13:16 +00:00
Steve French c8e56f1f4f Revert "[CIFS] Fix ntlmv2 auth with ntlmssp"
This reverts commit 9fbc590860.

The change to kernel crypto and fixes to ntlvm2 and ntlmssp
series, introduced a regression.  Deferring this patch series
to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
2010-09-08 21:10:58 +00:00
Steve French 745e507a9c Revert "missing changes during ntlmv2/ntlmssp auth and sign"
This reverts commit 3ec6bbcdb4.

    The change to kernel crypto and fixes to ntlvm2 and ntlmssp
    series, introduced a regression.  Deferring this patch series
    to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
2010-09-08 21:09:27 +00:00
Steve French 56234e2767 Revert "Eliminate sparse warning - bad constant expression"
This reverts commit 2d20ca8358.

    The change to kernel crypto and fixes to ntlvm2 and ntlmssp
    series, introduced a regression.  Deferring this patch series
    to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
2010-09-08 20:57:05 +00:00
Steve French 7100ae9726 Revert "[CIFS] Eliminate unused variable warning"
The change to kernel crypto and fixes to ntlvm2 and ntlmssp
series, introduced a regression.  Deferring this patch series
to 2.6.37 after Shirish fixes it.

This reverts commit c89e5198b2.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
2010-09-08 20:54:49 +00:00
Linus Torvalds c8c727db41 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix lock annotations
  fuse: flush background queue on connection close
2010-09-08 11:12:59 -07:00
Mark Fasheh 97b8f4a9df ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan
ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.

We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:

       /*
        * We give the orphan dir the root blkno to fake an orphan name,
        * and allocate enough space for our insertion.
        */
       status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
                                         osb->root_blkno,
                                         orphan_name, &orphan_insert);

Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index.  When it has that index, the above code fails
to allocate the proper index entry.  Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.

To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:26:00 +08:00
Mark Fasheh dd43bcde23 ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions
We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:26:00 +08:00
Mark Fasheh e49e27674d ocfs2: allow return of new inode block location before allocation of the inode
This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir).  Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:59 +08:00
Mark Fasheh d51349829c ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding
ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:58 +08:00
Mark Fasheh 021960cab3 ocfs2: split out inode alloc code from ocfs2_mknod_locked
Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:58 +08:00
Tristan Ye 81c8c82b5a Ocfs2: Fix a regression bug from mainline commit(6b933c8e6f).
The patch is to fix the regression bug brought from commit 6b933c8...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285

The commit 6b933c8e6f changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to  flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.

This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:57 +08:00
Jan Kara 9b4c0ff32c ocfs2: Fix deadlock when allocating page
We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:57 +08:00
Mark Fasheh b2b6ebf5f7 ocfs2: properly set and use inode group alloc hint
We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno.  Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.

Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:56 +08:00
Tao Ma 889f004a8c ocfs2: Use the right group in nfs sync check.
We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.

The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:56 +08:00
Jan Kara 04eda1a180 ocfs2: Flush drive's caches on fdatasync
When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.

Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:55 +08:00
Tao Ma f63afdb2c3 ocfs2: make __ocfs2_page_mkwrite handle file end properly.
__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:55 +08:00
Sunil Mushran f5ce5a08a4 ocfs2: Fix incorrect checksum validation error
For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.

But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.

Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:54 +08:00
Sunil Mushran dc696aced9 ocfs2: Fix metaecc error messages
Like tools, the checksum validate function now prints the values in hex.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
2010-09-08 14:25:53 +08:00
Linus Torvalds 4f63e3c5be Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
  nfsd4: mask out non-access bits in nfs4_access_to_omode
2010-09-07 19:21:02 -07:00
Linus Torvalds fa2925cf90 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Make fiemap work with sparse files
  xfs: prevent 32bit overflow in space reservation
  xfs: Disallow 32bit project quota id
  xfs: improve buffer cache hash scalability
2010-09-07 15:44:28 -07:00
Linus Torvalds 3c5dff7b5e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: potential ERR_PTR() dereference
2010-09-07 14:38:21 -07:00
Linus Torvalds d3de0eb164 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: checking for NULL instead of ERR_PTR
2010-09-07 14:04:59 -07:00
Linus Torvalds 4848d71569 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix leak of shadow dat inode in error path of load_nilfs
2010-09-07 14:01:50 -07:00
Valerie Aurora 7a2e8a8faa VFS: Sanity check mount flags passed to change_mnt_propagation()
Sanity check the flags passed to change_mnt_propagation().  Exactly
one flag should be set.  Return EINVAL otherwise.

Userspace can pass in arbitrary combinations of MS_* flags to mount().
do_change_type() is called if any of MS_SHARED, MS_PRIVATE, MS_SLAVE,
or MS_UNBINDABLE is set.  do_change_type() clears MS_REC and then
calls change_mnt_propagation() with the rest of the user-supplied
flags.  change_mnt_propagation() clearly assumes only one flag is set
but do_change_type() does not check that this is true.  For example,
mount() with flags MS_SHARED | MS_RDONLY does not actually make the
mount shared or read-only but does clear MNT_UNBINDABLE.

Signed-off-by: Valerie Aurora <vaurora@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07 13:46:20 -07:00
Miklos Szeredi b9ca67b2dd fuse: fix lock annotations
Sparse doesn't understand lock annotations of the form
__releases(&foo->lock).  Change them to __releases(foo->lock).  Same
for __acquires().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-09-07 13:42:41 +02:00
Miklos Szeredi 595afaf9e6 fuse: flush background queue on connection close
David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley <andareed@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2010-09-07 13:42:41 +02:00
Dan Carpenter 57f9bdac25 sysfs: checking for NULL instead of ERR_PTR
d_path() returns an ERR_PTR and it doesn't return NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03 17:26:28 -07:00
Alex Elder cb7a93412a Merge branch '2.6.36-xfs-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev 2010-09-03 09:02:32 -05:00
Tao Ma 9af2546508 xfs: Make fiemap work with sparse files
In xfs_vn_fiemap, we set bvm_count to fi_extent_max + 1 and want
to return fi_extent_max extents, but actually it won't work for
a sparse file. The reason is that in xfs_getbmap we will
calculate holes and set it in 'out', while out is malloced by
bmv_count(fi_extent_max+1) which didn't consider holes. So in the
worst case, if 'out' vector looks like
[hole, extent, hole, extent, hole, ... hole, extent, hole],
we will only return half of fi_extent_max extents.

This patch add a new parameter BMV_IF_NO_HOLES for bvm_iflags.
So with this flags, we don't use our 'out' in xfs_getbmap for
a hole. The solution is a bit ugly by just don't increasing
index of 'out' vector. I felt that it is not easy to skip it
at the very beginning since we have the complicated check and
some function like xfs_getbmapx_fix_eof_hole to adjust 'out'.

Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-09-03 09:02:11 -05:00
Dave Chinner 72656c46f5 xfs: prevent 32bit overflow in space reservation
If we attempt to preallocate more than 2^32 blocks of space in a
single syscall, the transaction block reservation will overflow
leading to a hangs in the superblock block accounting code. This
is trivially reproduced with xfs_io. Fix the problem by capping the
allocation reservation to the maximum number of blocks a single
xfs_bmapi() call can allocate (2^21 blocks).

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-09-03 12:19:33 +10:00
J. Bruce Fields 8f34a430ac nfsd4: mask out non-access bits in nfs4_access_to_omode
This fixes an unnecessary BUG().

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-02 15:25:09 -04:00
Arkadiusz Mi?kiewicz 23963e54ce xfs: Disallow 32bit project quota id
Currently on-disk structure is able to keep only 16bit project quota
id, so disallow 32bit ones. This fixes a problem where parts of
kernel structures holding project quota id are 32bit while parts
(on-disk) are 16bit variables which causes project quota member
files to be inaccessible for some operations (like mv/rm).

Signed-off-by: Arkadiusz Mi?kiewicz <arekm@maven.pl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-09-02 10:29:08 -05:00
Dave Chinner 9bc08a45fb xfs: improve buffer cache hash scalability
When doing large parallel file creates on a 16p machines, large amounts of
time is being spent in _xfs_buf_find(). A system wide profile with perf top
shows this:

          1134740.00 19.3% _xfs_buf_find
           733142.00 12.5% __ticket_spin_lock

The problem is that the hash contains 45,000 buffers, and the hash table width
is only 256 buffers. That means we've got around 200 buffers per chain, and
searching it is quite expensive. The hash table size needs to increase.

Secondly, every time we do a lookup, we promote the buffer we find to the head
of the hash chain. This is causing cachelines to be dirtied and causes
invalidation of cachelines across all CPUs that may have walked the hash chain
recently. hence every walk of the hash chain is effectively a cold cache walk.
Remove the promotion to avoid this invalidation.

The results are:

          1045043.00 21.2% __ticket_spin_lock
           326184.00  6.6% _xfs_buf_find

A 70% drop in the CPU usage when looking up buffers. Unfortunately that does
not result in an increase in performance underthis workload as contention on
the inode_lock soaks up most of the reduction in CPU usage.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-09-02 15:14:38 +10:00
Dan Carpenter 8f587df479 9p: potential ERR_PTR() dereference
p9_client_walk() can return error values if we run out of space or there
is a problem with the network.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-30 10:35:28 -05:00
Ryusuke Konishi 4afc31345e nilfs2: fix leak of shadow dat inode in error path of load_nilfs
If load_nilfs() gets an error while doing recovery, it will fail to
free the shadow inode of dat (nilfs->ns_gc_dat).

This fixes the leak issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-08-30 10:18:03 +09:00
Linus Torvalds 30c0f6a049 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  fsnotify: drop two useless bools in the fnsotify main loop
  fsnotify: fix list walk order
  fanotify: Return EPERM when a process is not privileged
  fanotify: resize pid and reorder structure
  fanotify: drop duplicate pr_debug statement
  fanotify: flush outstanding perm requests on group destroy
  fsnotify: fix ignored mask handling between inode and vfsmount marks
  fanotify: add MAINTAINERS entry
  fsnotify: reset used_inode and used_vfsmount on each pass
  fanotify: do not dereference inode_mark when it is unset
2010-08-28 14:11:04 -07:00
Linus Torvalds e933424c48 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Fix encrypted file name lookup regression
  ecryptfs: properly mark init functions
  fs/ecryptfs: Return -ENOMEM on memory allocation failure
2010-08-28 14:10:43 -07:00
Linus Torvalds 997396a73a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix get_ticket_handler() error handling
  ceph: don't BUG on ENOMEM during mds reconnect
  ceph: ceph_mdsc_build_path() returns an ERR_PTR
  ceph: Fix warnings
  ceph: ceph_get_inode() returns an ERR_PTR
  ceph: initialize fields on new dentry_infos
  ceph: maintain i_head_snapc when any caps are dirty, not just for data
  ceph: fix osd request lru adjustment when sending request
  ceph: don't improperly set dir complete when holding EXCL cap
  mm: exporting account_page_dirty
  ceph: direct requests in snapped namespace based on nonsnap parent
  ceph: queue cap snap writeback for realm children on snap update
  ceph: include dirty xattrs state in snapped caps
  ceph: fix xattr cap writeback
  ceph: fix multiple mds session shutdown
2010-08-28 14:07:20 -07:00
Linus Torvalds 2547d1d20f Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix NULL dereference in nfsd_statfs()
  nfsd4: fix downgrade/lock logic
  nfsd4: typo fix in find_any_file
  nfsd4: bad BUG() in preprocess_stateid_op
2010-08-28 14:05:55 -07:00
J. Bruce Fields b76b4014f9 writeback: Fix lost wake-up shutting down writeback thread
Setting the task state here may cause us to miss the wake up from
kthread_stop(), so we need to recheck kthread_should_stop() or risk
sleeping forever in the following schedule().

Symptom was an indefinite hang on an NFSv4 mount.  (NFSv4 may create
multiple mounts in a temporary namespace while traversing the mount
path, and since the temporary namespace is immediately destroyed, it may
end up destroying a mount very soon after it was created, possibly
making this race more likely.)

INFO: task mount.nfs4:4314 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount.nfs4    D 0000000000000000  2880  4314   4313 0x00000000
 ffff88001ed6da28 0000000000000046 ffff88001ed6dfd8 ffff88001ed6dfd8
 ffff88001ed6c000 ffff88001ed6c000 ffff88001ed6c000 ffff88001e5003a0
 ffff88001ed6dfd8 ffff88001e5003a8 ffff88001ed6c000 ffff88001ed6dfd8
Call Trace:
 [<ffffffff8196090d>] schedule_timeout+0x1cd/0x2e0
 [<ffffffff8106a31c>] ? mark_held_locks+0x6c/0xa0
 [<ffffffff819639a0>] ? _raw_spin_unlock_irq+0x30/0x60
 [<ffffffff8106a5fd>] ? trace_hardirqs_on_caller+0x14d/0x190
 [<ffffffff819671fe>] ? sub_preempt_count+0xe/0xd0
 [<ffffffff8195fc80>] wait_for_common+0x120/0x190
 [<ffffffff81033c70>] ? default_wake_function+0x0/0x20
 [<ffffffff8195fdcd>] wait_for_completion+0x1d/0x20
 [<ffffffff810595fa>] kthread_stop+0x4a/0x150
 [<ffffffff81061a60>] ? thaw_process+0x70/0x80
 [<ffffffff810cc68a>] bdi_unregister+0x10a/0x1a0
 [<ffffffff81229dc9>] nfs_put_super+0x19/0x20
 [<ffffffff810ee8c4>] generic_shutdown_super+0x54/0xe0
 [<ffffffff810ee9b6>] kill_anon_super+0x16/0x60
 [<ffffffff8122d3b9>] nfs4_kill_super+0x39/0x90
 [<ffffffff810eda45>] deactivate_locked_super+0x45/0x60
 [<ffffffff810edfb9>] deactivate_super+0x49/0x70
 [<ffffffff81108294>] mntput_no_expire+0x84/0xe0
 [<ffffffff811084ef>] release_mounts+0x9f/0xc0
 [<ffffffff81108575>] put_mnt_ns+0x65/0x80
 [<ffffffff8122cc56>] nfs_follow_remote_path+0x1e6/0x420
 [<ffffffff8122cfbf>] nfs4_try_mount+0x6f/0xd0
 [<ffffffff8122d0c2>] nfs4_get_sb+0xa2/0x360
 [<ffffffff810edcb8>] vfs_kern_mount+0x88/0x1f0
 [<ffffffff810ede92>] do_kern_mount+0x52/0x130
 [<ffffffff81963d9a>] ? _lock_kernel+0x6a/0x170
 [<ffffffff81108e9e>] do_mount+0x26e/0x7f0
 [<ffffffff81106b3a>] ? copy_mount_options+0xea/0x190
 [<ffffffff811094b8>] sys_mount+0x98/0xf0
 [<ffffffff810024d8>] system_call_fastpath+0x16/0x1b
1 lock held by mount.nfs4/4314:
 #0:  (&type->s_umount_key#24){+.+...}, at: [<ffffffff810edfb1>] deactivate_super+0x41/0x70

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-28 08:52:10 +02:00
Eric Paris 92b4678efa fsnotify: drop two useless bools in the fnsotify main loop
The fsnotify main loop has 2 bools which indicated if we processed the
inode or vfsmount mark in that particular pass through the loop.  These
bool can we replaced with the inode_group and vfsmount_group variables
and actually make the code a little easier to understand.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-27 21:42:11 -04:00
Eric Paris f72adfd540 fsnotify: fix list walk order
Marks were stored on the inode and vfsmonut mark list in order from
highest memory address to lowest memory address.  The code to walk those
lists thought they were in order from lowest to highest with
unpredictable results when trying to match up marks from each.  It was
possible that extra events would be sent to userspace when inode
marks ignoring events wouldn't get matched with the vfsmount marks.

This problem only affected fanotify when using both vfsmount and inode
marks simultaneously.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-27 21:41:26 -04:00
Andreas Gruenbacher a2f13ad0ba fanotify: Return EPERM when a process is not privileged
The appropriate error code when privileged operations are denied is
EPERM, not EACCES.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <paris@paris.rdu.redhat.com>
2010-08-27 19:59:42 -04:00
Tyler Hicks 93c3fe40c2 eCryptfs: Fix encrypted file name lookup regression
Fixes a regression caused by 21edad3220

When file name encryption was enabled, ecryptfs_lookup() failed to use
the encrypted and encoded version of the upper, plaintext, file name
when performing a lookup in the lower file system. This made it
impossible to lookup existing encrypted file names and any newly created
files would have plaintext file names in the lower file system.

https://bugs.launchpad.net/ecryptfs/+bug/623087

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-27 10:50:53 -05:00
Jerome Marchand 7371a38201 ecryptfs: properly mark init functions
Some ecryptfs init functions are not prefixed by __init and thus not
freed after initialization. This patch saved about 1kB in ecryptfs
module.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-27 10:50:52 -05:00
Julia Lawall f137f15072 fs/ecryptfs: Return -ENOMEM on memory allocation failure
In this code, 0 is returned on memory allocation failure, even though other
failures return -ENOMEM or other similar values.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ret;
expression x,e1,e2,e3;
@@

ret = 0
... when != ret = e1
*x = \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != ret = e2
if (x == NULL) { ... when != ret = e3
  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-27 10:50:52 -05:00
Takashi Iwai f6360efb83 nfsd: fix NULL dereference in nfsd_statfs()
The commit ebabe9a900
    pass a struct path to vfs_statfs
introduced the struct path initialization, and this seems to trigger
an Oops on my machine.

fh_dentry field may be NULL and set later in fh_verify(), thus the
initialization of path must be after fh_verify().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26 13:23:16 -04:00
J. Bruce Fields f632265d0f Merge commit 'v2.6.36-rc1' into HEAD 2010-08-26 13:22:27 -04:00
J. Bruce Fields 7d94784293 nfsd4: fix downgrade/lock logic
If we already had a RW open for a file, and get a readonly open, we were
piggybacking on the existing RW open.  That's inconsistent with the
downgrade logic which blows away the RW open assuming you'll still have
a readonly open.

Also, make sure there is a readonly or writeonly open available for
locking, again to prevent bad behavior in downgrade cases when any RW
open may be lost.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26 13:22:02 -04:00
J. Bruce Fields 18608ad49c nfsd4: typo fix in find_any_file
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26 13:21:09 -04:00
J. Bruce Fields 30c0e1ef0a nfsd4: bad BUG() in preprocess_stateid_op
It's OK for this function to return without setting filp--we do it in
the special-stateid case.

And there's a legitimate case where we can hit this, since we do permit
reads on write-only stateid's.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26 13:20:51 -04:00
Suresh Jayaraman f0138a79d7 Cannot allocate memory error on mount
On 08/26/2010 01:56 AM, joe hefner wrote:
> On a recent Fedora (13), I am seeing a mount failure message that I can not explain. I have a Windows Server 2003ýa with a share set up for access only for a specific username (say userfoo). If I try to mount it from Linux,ýusing userfoo and the correct password all is well. If I try with a bad password or with some other username (userbar), it fails with "Permission denied" as expected. If I try to mount as username = administrator, and give the correct administrator password, I would also expect "Permission denied", but I see "Cannot allocate memory" instead.

> ýfs/cifs/netmisc.c: Mapping smb error code 5 to POSIX err -13
> ýfs/cifs/cifssmb.c: Send error in QPathInfo = -13
> ýCIFS VFS: cifs_read_super: get root inode failed

Looks like the commit 0b8f18e3 assumed that cifs_get_inode_info() and
friends fail only due to memory allocation error when the inode is NULL
which is not the case if CIFSSMBQPathInfo() fails and returns an error.
Fix this by propagating the actual error code back.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-26 16:53:27 +00:00
Dan Carpenter b545787dbb ceph: fix get_ticket_handler() error handling
get_ticket_handler() returns a valid pointer or it returns
ERR_PTR(-ENOMEM) if kzalloc() fails.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 09:26:50 -07:00
Sage Weil e072f8aa35 ceph: don't BUG on ENOMEM during mds reconnect
We are in a position to return an error; do that instead.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 09:26:37 -07:00
Dan Carpenter f44c3890d9 ceph: ceph_mdsc_build_path() returns an ERR_PTR
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 09:24:28 -07:00
Steve French c89e5198b2 [CIFS] Eliminate unused variable warning
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-26 02:11:54 +00:00
Alan Cox ad8453ab0a ceph: Fix warnings
Just scrubbing some warnings so I can see real problem ones in the build
noise. For 32bit we need to coax gcc politely into believing we really
honestly intend to the casts. Using (u64)(unsigned long) means we cast from
a pointer to a type of the right size and then extend it. This stops the
warning spew.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25 12:02:14 -07:00
Dan Carpenter ac1f12ef56 ceph: ceph_get_inode() returns an ERR_PTR
ceph_get_inode() returns an ERR_PTR and it doesn't return a NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25 12:01:54 -07:00
Linus Torvalds 37822188ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  Eliminate sparse warning - bad constant expression
  cifs: check for NULL session password
  missing changes during ntlmv2/ntlmssp auth and sign
  [CIFS] Fix ntlmv2 auth with ntlmssp
  cifs: correction of unicode header files
  cifs: fix NULL pointer dereference in cifs_find_smb_ses
  cifs: consolidate error handling in several functions
  cifs: clean up error handling in cifs_mknod
2010-08-25 09:57:59 -07:00
Sage Weil 36e21687e6 ceph: initialize fields on new dentry_infos
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24 16:24:19 -07:00
Sage Weil 7d8cb26d7d ceph: maintain i_head_snapc when any caps are dirty, not just for data
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under.  It is used by queue_cap_snap to set up
the cap_snap.  However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps.  This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24 16:24:18 -07:00
shirishpargaonkar@gmail.com 2d20ca8358 Eliminate sparse warning - bad constant expression
Eliminiate sparse warning during usage of crypto_shash_* APIs
       error: bad constant expression

Allocate memory for shash descriptors once, so that we do not kmalloc/kfree it
for every signature generation (shash descriptor for md5 hash).

From ed7538619817777decc44b5660b52268077b74f3 Mon Sep 17 00:00:00 2001
From: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Date: Tue, 24 Aug 2010 11:47:43 -0500
Subject: [PATCH] eliminate sparse warnings during crypto_shash_* APis usage

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-24 18:12:52 +00:00
Christoph Hellwig b5420f2359 xfs: do not discard page cache data on EAGAIN
If xfs_map_blocks returns EAGAIN because of lock contention we must redirty the
page and not disard the pagecache content and return an error from writepage.
We used to do this correctly, but the logic got lost during the recent
reshuffle of the writepage code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Mike Gao <ygao.linux@gmail.com>
Tested-by: Mike Gao <ygao.linux@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-08-24 11:47:51 +10:00
Dave Chinner 3b93c7aaef xfs: don't do memory allocation under the CIL context lock
Formatting items requires memory allocation when using delayed
logging. Currently that memory allocation is done while holding the
CIL context lock in read mode. This means that if memory allocation
takes some time (e.g. enters reclaim), we cannot push on the CIL
until the allocation(s) required by formatting complete. This can
stall CIL pushes for some time, and once a push is stalled so are
all new transaction commits.

Fix this splitting the item formatting into two steps. The first
step which does the allocation and memcpy() into the allocated
buffer is now done outside the CIL context lock, and only the CIL
insert is done inside the CIL context lock. This avoids the stall
issue.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:45:53 +10:00
Dave Chinner a44f13edf0 xfs: Reduce log force overhead for delayed logging
Delayed logging adds some serialisation to the log force process to
ensure that it does not deference a bad commit context structure
when determining if a CIL push is necessary or not. It does this by
grabing the CIL context lock exclusively, then dropping it before
pushing the CIL if necessary. This causes serialisation of all log
forces and pushes regardless of whether a force is necessary or not.
As a result fsync heavy workloads (like dbench) can be significantly
slower with delayed logging than without.

To avoid this penalty, copy the current sequence from the context to
the CIL structure when they are swapped. This allows us to do
unlocked checks on the current sequence without having to worry
about dereferencing context structures that may have already been
freed. Hence we can remove the CIL context locking in the forcing
code and only call into the push code if the current context matches
the sequence we need to force.

By passing the sequence into the push code, we can check the
sequence again once we have the CIL lock held exclusive and abort if
the sequence has already been pushed. This avoids a lock round-trip
and unnecessary CIL pushes when we have racing push calls.

The result is that the regression in dbench performance goes away -
this change improves dbench performance on a ramdisk from ~2100MB/s
to ~2500MB/s. This compares favourably to not using delayed logging
which retuns ~2500MB/s for the same workload.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:40:03 +10:00
Dave Chinner 1a387d3be2 xfs: dummy transactions should not dirty VFS state
When we  need to cover the log, we issue dummy transactions to ensure
the current log tail is on disk. Unfortunately we currently use the
root inode in the dummy transaction, and the act of committing the
transaction dirties the inode at the VFS level.

As a result, the VFS writeback of the dirty inode will prevent the
filesystem from idling long enough for the log covering state
machine to complete. The state machine gets stuck in a loop issuing
new dummy transactions to cover the log and never makes progress.

To avoid this problem, the dummy transactions should not cause
externally visible state changes. To ensure this occurs, make sure
that dummy transactions log an unchanging field in the superblock as
it's state is never propagated outside the filesystem. This allows
the log covering state machine to complete successfully and the
filesystem now correctly enters a fully idle state about 90s after
the last modification was made.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:46:31 +10:00
Stuart Brodsky 2fe33661fc xfs: ensure f_ffree returned by statfs() is non-negative
Because of delayed updates to sb_icount field in the super block, it
is possible to allocate over maxicount number of inodes.  This
causes the arithmetic to calculate a negative number of free inodes
in user commands like df or stat -f.

Since maxicount is a somewhat arbitrary number, a slight over
allocation is not critical but user commands should be displayed as
0 or greater and never go negative.  To do this the value in the
stats buffer f_ffree is capped to never go negative.

[ Modified to use max_t as per Christoph's comment. ]

Signed-off-by: Stu Brodsky <sbrodsky@sgi.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-08-24 11:46:05 +10:00
Dave Chinner efceab1d56 xfs: handle negative wbc->nr_to_write during sync writeback
During data integrity (WB_SYNC_ALL) writeback, wbc->nr_to_write will
go negative on inodes with more than 1024 dirty pages due to
implementation details of write_cache_pages(). Currently XFS will
abort page clustering in writeback once nr_to_write drops below
zero, and so for data integrity writeback we will do very
inefficient page at a time allocation and IO submission for inodes
with large numbers of dirty pages.

Fix this by only aborting the page clustering code when
wbc->nr_to_write is negative and the sync mode is WB_SYNC_NONE.

Cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:44:56 +10:00
Dave Chinner 4536f2ad8b xfs: fix untrusted inode number lookup
Commit 7124fe0a5b ("xfs: validate untrusted inode
numbers during lookup") changes the inode lookup code to do btree lookups for
untrusted inode numbers. This change made an invalid assumption about the
alignment of inodes and hence incorrectly calculated the first inode in the
cluster. As a result, some inode numbers were being incorrectly considered
invalid when they were actually valid.

The issue was not picked up by the xfstests suite because it always runs fsr
and dump (the two utilities that utilise the bulkstat interface) on cache hot
inodes and hence the lookup code in the cold cache path was not sufficiently
exercised to uncover this intermittent problem.

Fix the issue by relaxing the btree lookup criteria and then checking if the
record returned contains the inode number we are lookup for. If it we get an
incorrect record, then the inode number is invalid.

Cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:42:30 +10:00
Dave Chinner 5b3eed756c xfs: ensure we mark all inodes in a freed cluster XFS_ISTALE
Under heavy load parallel metadata loads (e.g. dbench), we can fail
to mark all the inodes in a cluster being freed as XFS_ISTALE as we
skip inodes we cannot get the XFS_ILOCK_EXCL or the flush lock on.
When this happens and the inode cluster buffer has already been
marked stale and freed, inode reclaim can try to write the inode out
as it is dirty and not marked stale. This can result in writing th
metadata to an freed extent, or in the case it has already
been overwritten trigger a magic number check failure and return an
EUCLEAN error such as:

Filesystem "ram0": inode 0x442ba1 background reclaim flush failed with 117

Fix this by ensuring that we hoover up all in memory inodes in the
cluster and mark them XFS_ISTALE when freeing the cluster.

Cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:42:41 +10:00
Dave Chinner d17c701ce6 xfs: unlock items before allowing the CIL to commit
When we commit a transaction using delayed logging, we need to
unlock the items in the transaciton before we unlock the CIL context
and allow it to be checkpointed. If we unlock them after we release
the CIl context lock, the CIL can checkpoint and complete before
we free the log items. This breaks stale buffer item unlock and
unpin processing as there is an implicit assumption that the unlock
will occur before the unpin.

Also, some log items need to store the LSN of the transaction commit
in the item (inodes and EFIs) and so can race with other transaction
completions if we don't prevent the CIL from checkpointing before
the unlock occurs.

Cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:42:52 +10:00
Jeff Layton 24e6cf92fd cifs: check for NULL session password
It's possible for a cifsSesInfo struct to have a NULL password, so we
need to check for that prior to running strncmp on it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-23 17:38:31 +00:00
Shirish Pargaonkar 3ec6bbcdb4 missing changes during ntlmv2/ntlmssp auth and sign
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-23 17:38:24 +00:00
Andrew Morton 220eb7fd98 fs/bio-integrity.c: return -ENOMEM on kmalloc failure
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 13:36:59 +02:00
David Rientjes 72f4650337 bio-integrity.c: remove dependency on __GFP_NOFAIL
The kmalloc() in bio_integrity_prep() is failable, so remove __GFP_NOFAIL
from its mask.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 13:36:58 +02:00
Henry C Chang 07a27e226d ceph: fix osd request lru adjustment when sending request
Fix argument order.  We want to move the item to the end of the list, not
change the position of the head.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 21:34:27 -07:00
Sage Weil 124514918b ceph: don't improperly set dir complete when holding EXCL cap
If we hold the EXCL cap, we cannot trust the dir stats from the MDS (num
files, subdirs) and must not incorrectly conclude that the directory is
empty.  If we do, we get can bad results from lookup (bad ENOENT) and
bad readdir results.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 21:33:32 -07:00
Tvrtko Ursulin ff8d6e9831 fanotify: drop duplicate pr_debug statement
This reminded me... you have two pr_debugs in fanotify_should_send_event
which output redundant information. Maybe you intended it like that so
it is selectable how much log spam you want, or if not you may want to
apply this patch.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22 20:30:12 -04:00
Eric Paris 2eebf582c9 fanotify: flush outstanding perm requests on group destroy
When an fanotify listener is closing it may cause a deadlock between the
listener and the original task doing an fs operation.  If the original task
is waiting for a permissions response it will be holding the srcu lock.  The
listener cannot clean up and exit until after that srcu lock is syncronized.
Thus deadlock.  The fix introduced here is to stop accepting new permissions
events when a listener is shutting down and to grant permission for all
outstanding events.  Thus the original task will eventually release the srcu
lock and the listener can complete shutdown.

Reported-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22 20:28:16 -04:00
Eric Paris 84e1ab4d87 fsnotify: fix ignored mask handling between inode and vfsmount marks
The interesting 2 list lockstep walking didn't quite work out if the inode
marks only had ignores and the vfsmount list requested events.  The code to
shortcut list traversal would not run the inode list since it didn't have real
event requests.  This code forces inode list traversal when a vfsmount mark
matches the event type.  Maybe we could add an i_fsnotify_ignored_mask field
to struct inode to get the shortcut back, but it doesn't seem worth it to grow
struct inode again.

I bet with the recent changes to lock the way we do now it would actually not
be a major perf hit to just drop i_fsnotify_mark_mask altogether.  But that is
for another day.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22 20:09:41 -04:00
Eric Paris 5f3f259fa8 fsnotify: reset used_inode and used_vfsmount on each pass
The fsnotify main loop has 2 booleans which tell if a particular mark was
sent to the listeners or if it should be processed in the next pass.  The
problem is that the booleans were not reset on each traversal of the loop.
So marks could get skipped even when they were not sent to the notifiers.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22 20:09:41 -04:00
Eric Paris faa9560ae7 fanotify: do not dereference inode_mark when it is unset
The fanotify code is supposed to get the group from the mark.  It accidentally
only used the inode_mark.  If the vfsmount_mark was set but not the inode_mark
it would deref the NULL inode_mark.  Get the group from the correct place.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22 20:09:41 -04:00
Michael Rubin 679ceace84 mm: exporting account_page_dirty
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.

Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:51 -07:00
Sage Weil eb6bb1c5bd ceph: direct requests in snapped namespace based on nonsnap parent
When making a request in the virtual snapdir or a snapped portion of the
namespace, we should choose the MDS based on the first nonsnap parent (and
its caps).  If that is not the best place, we will get forward hints to
find the right MDS in the cluster.  This fixes ESTALE errors when using
the .snap directory and namespace with multiple MDSs.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:48 -07:00
Sage Weil ed32604448 ceph: queue cap snap writeback for realm children on snap update
When a realm is updated, we need to queue writeback on inodes in that
realm _and_ its children.  Otherwise, if the inode gets cowed on the
server, we can get a hang later due to out-of-sync cap/snap state.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:47 -07:00
Sage Weil 4a625be472 ceph: include dirty xattrs state in snapped caps
When we snapshot dirty metadata that needs to be written back to the MDS,
include dirty xattr metadata.  Make the capsnap reference the encoded
xattr blob so that it will be written back in the FLUSHSNAP op.

Also fix the capsnap creation guard to include dirty auth or file bits,
not just tests specific to dirty file data or file writes in progress
(this fixes auth metadata writeback).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:46 -07:00
Sage Weil 082afec92d ceph: fix xattr cap writeback
We should include the xattr metadata blob in the cap update message any
time we are flushing dirty state, NOT just when we are also dropping the
cap.  This fixes async xattr writeback.

Also, clean up the code slightly to avoid duplicating the bit test.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:41 -07:00
Sage Weil f3c60c5918 ceph: fix multiple mds session shutdown
The use of a completion when waiting for session shutdown during umount is
inappropriate, given the complexity of the condition.  For multiple MDS's,
this resulted in the umount thread spinning, often preventing the session
close message from being processed in some cases.

Switch to a waitqueue and defined a condition helper.  This cleans things
up nicely.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:04:43 -07:00
Linus Torvalds a28e0852d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: wait for discard to finish
2010-08-22 09:44:47 -07:00
Steve French 9fbc590860 [CIFS] Fix ntlmv2 auth with ntlmssp
Make ntlmv2 as an authentication mechanism within ntlmssp
instead of ntlmv1.
Parse type 2 response in ntlmssp negotiation to pluck
AV pairs and use them to calculate ntlmv2 response token.
Also, assign domain name from the sever response in type 2
packet of ntlmssp and use that (netbios) domain name in
calculation of response.

Enable cifs/smb signing using rc4 and md5.

Changed name of the structure mac_key to session_key to reflect
the type of key it holds.

Use kernel crypto_shash_* APIs instead of the equivalent cifs functions.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-20 20:42:26 +00:00
Igor Druzhinin bf4f121138 cifs: correction of unicode header files
This patch corrects a problem of compilation errors at removal of
UNIUPR_NOLOWER definition and adds include guards to cifs_unicode.h.

Signed-off-by: Igor Druzhinin <jaxbrigs@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-20 00:46:42 +00:00
Linus Torvalds 763008c435 Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix an Oops in the NFSv4 atomic open code
  NFS: Fix the selection of security flavours in Kconfig
  NFS: fix the return value of nfs_file_fsync()
  rpcrdma: Fix SQ size calculation when memreg is FRMR
  xprtrdma: Do not truncate iova_start values in frmr registrations.
  nfs: Remove redundant NULL check upon kfree()
  nfs: Add "lookupcache" to displayed mount options
  NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
  SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)
2010-08-18 15:45:23 -07:00
Jeff Layton fc87a40677 cifs: fix NULL pointer dereference in cifs_find_smb_ses
cifs_find_smb_ses assumes that the vol->password field is a valid
pointer, but that's only the case if a password was passed in via
the options string. It's possible that one won't be if there is
no mount helper on the box.

Reported-by: diabel <gacek-2004@wp.pl>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-18 17:26:25 +00:00
Linus Torvalds 145c3ae46b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: brlock vfsmount_lock
  fs: scale files_lock
  lglock: introduce special lglock and brlock spin locks
  tty: fix fu_list abuse
  fs: cleanup files_lock locking
  fs: remove extra lookup in __lookup_hash
  fs: fs_struct rwlock to spinlock
  apparmor: use task path helpers
  fs: dentry allocation consolidation
  fs: fix do_lookup false negative
  mbcache: Limit the maximum number of cache entries
  hostfs ->follow_link() braino
  hostfs: dumb (and usually harmless) tpyo - strncpy instead of strlcpy
  remove SWRITE* I/O types
  kill BH_Ordered flag
  vfs: update ctime when changing the file's permission by setfacl
  cramfs: only unlock new inodes
  fix reiserfs_evict_inode end_writeback second call
2010-08-18 09:35:08 -07:00
Ryusuke Konishi 1cb0c924fa nilfs2: wait for discard to finish
nilfs_discard_segment() doesn't wait for completion of discard
requests.  This specifies BLKDEV_IFL_WAIT flag when calling
blkdev_issue_discard() in order to fix the sync failure.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@lst.de>
2010-08-19 00:11:06 +09:00
Trond Myklebust 0a377cff94 NFS: Fix an Oops in the NFSv4 atomic open code
Adam Lackorzynski reports:

with 2.6.35.2 I'm getting this reproducible Oops:

[  110.825396] BUG: unable to handle kernel NULL pointer dereference at
(null)
[  110.828638] IP: [<ffffffff811247b7>] encode_attrs+0x1a/0x2a4
[  110.828638] PGD be89f067 PUD bf18f067 PMD 0
[  110.828638] Oops: 0000 [#1] SMP
[  110.828638] last sysfs file: /sys/class/net/lo/operstate
[  110.828638] CPU 2
[  110.828638] Modules linked in: rtc_cmos rtc_core rtc_lib amd64_edac_mod
i2c_amd756 edac_core i2c_core dm_mirror dm_region_hash dm_log dm_snapshot
sg sr_mod usb_storage ohci_hcd mptspi tg3 mptscsih mptbase usbcore nls_base
[last unloaded: scsi_wait_scan]
[  110.828638]
[  110.828638] Pid: 11264, comm: setchecksum Not tainted 2.6.35.2 #1
[  110.828638] RIP: 0010:[<ffffffff811247b7>]  [<ffffffff811247b7>]
encode_attrs+0x1a/0x2a4
[  110.828638] RSP: 0000:ffff88003bf5b878  EFLAGS: 00010296
[  110.828638] RAX: ffff8800bddb48a8 RBX: ffff88003bf5bb18 RCX:
0000000000000000
[  110.828638] RDX: ffff8800be258800 RSI: 0000000000000000 RDI:
ffff88003bf5b9f8
[  110.828638] RBP: 0000000000000000 R08: ffff8800bddb48a8 R09:
0000000000000004
[  110.828638] R10: 0000000000000003 R11: ffff8800be779000 R12:
ffff8800be258800
[  110.828638] R13: ffff88003bf5b9f8 R14: ffff88003bf5bb20 R15:
ffff8800be258800
[  110.828638] FS:  0000000000000000(0000) GS:ffff880041e00000(0063)
knlGS:00000000556bd6b0
[  110.828638] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  110.828638] CR2: 0000000000000000 CR3: 00000000be8ef000 CR4:
00000000000006e0
[  110.828638] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[  110.828638] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[  110.828638] Process setchecksum (pid: 11264, threadinfo
ffff88003bf5a000, task ffff88003f232210)
[  110.828638] Stack:
[  110.828638]  0000000000000000 ffff8800bfbcf920 0000000000000000
0000000000000ffe
[  110.828638] <0> 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[  110.828638] <0> 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[  110.828638] Call Trace:
[  110.828638]  [<ffffffff81124c1f>] ? nfs4_xdr_enc_setattr+0x90/0xb4
[  110.828638]  [<ffffffff81371161>] ? call_transmit+0x1c3/0x24a
[  110.828638]  [<ffffffff813774d9>] ? __rpc_execute+0x78/0x22a
[  110.828638]  [<ffffffff81371a91>] ? rpc_run_task+0x21/0x2b
[  110.828638]  [<ffffffff81371b7e>] ? rpc_call_sync+0x3d/0x5d
[  110.828638]  [<ffffffff8111e284>] ? _nfs4_do_setattr+0x11b/0x147
[  110.828638]  [<ffffffff81109466>] ? nfs_init_locked+0x0/0x32
[  110.828638]  [<ffffffff810ac521>] ? ifind+0x4e/0x90
[  110.828638]  [<ffffffff8111e2fb>] ? nfs4_do_setattr+0x4b/0x6e
[  110.828638]  [<ffffffff8111e634>] ? nfs4_do_open+0x291/0x3a6
[  110.828638]  [<ffffffff8111ed81>] ? nfs4_open_revalidate+0x63/0x14a
[  110.828638]  [<ffffffff811056c4>] ? nfs_open_revalidate+0xd7/0x161
[  110.828638]  [<ffffffff810a2de4>] ? do_lookup+0x1a4/0x201
[  110.828638]  [<ffffffff810a4733>] ? link_path_walk+0x6a/0x9d5
[  110.828638]  [<ffffffff810a42b6>] ? do_last+0x17b/0x58e
[  110.828638]  [<ffffffff810a5fbe>] ? do_filp_open+0x1bd/0x56e
[  110.828638]  [<ffffffff811cd5e0>] ? _atomic_dec_and_lock+0x30/0x48
[  110.828638]  [<ffffffff810a9b1b>] ? dput+0x37/0x152
[  110.828638]  [<ffffffff810ae063>] ? alloc_fd+0x69/0x10a
[  110.828638]  [<ffffffff81099f39>] ? do_sys_open+0x56/0x100
[  110.828638]  [<ffffffff81027a22>] ? ia32_sysret+0x0/0x5
[  110.828638] Code: 83 f1 01 e8 f5 ca ff ff 48 83 c4 50 5b 5d 41 5c c3 41
57 41 56 41 55 49 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 81 ec 18 01 00 00
<8b> 06 89 c2 83 e2 08 83 fa 01 19 db 83 e3 f8 83 c3 18 a8 01 8d
[  110.828638] RIP  [<ffffffff811247b7>] encode_attrs+0x1a/0x2a4
[  110.828638]  RSP <ffff88003bf5b878>
[  110.828638] CR2: 0000000000000000
[  112.840396] ---[ end trace 95282e83fd77358f ]---

We need to ensure that the O_EXCL flag is turned off if the user doesn't
set O_CREAT.

Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-18 09:25:42 -04:00