Commit Graph

19 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab 844a9e93d7 V4L/DVB: sms: Convert IR support to use the Remote Controller core
Rewrites the siano IR implementation. The previous implementation were
non-standard. As such, it has issues if more than one device registers IR,
as there used to have some static constants used during protocol decoding
phase. Also, it used to implement its on RAW decoder, and only for RC5.

The new code uses RC core subsystem for handling IR. This brings several
new features to the driver, including:
	- Allow to dynamically replace the IR keycodes;
	- Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY);
	- Supports lirc dev;
	- Doesn't have race conditions when more than one sms IR is
	  registered;
	- The code size for the IR implementation is very small;
	- it exports the IR features via /sys/class/rc.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:43:56 -03:00
Roel Kluin 3a054627cc V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()
Make id signed so we can't get an invalid pointer when we pass a negative
id.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:36 -02:00
Uri Shkolnik 5b8db89783 V4L/DVB (11887): Siano: smscards - add board (target) events
Add events handling for targets. All board-specific
(target specific) should reside here.

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:40 -03:00
Uri Shkolnik d0b66180c3 V4L/DVB (11883): Siano: cards - add two additional (USB) devices
Add two additional USB targets, add these to the 'cards' modules
and to the 'smsusb' module.

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:37 -03:00
Uri Shkolnik 90f944a38c V4L/DVB (11815): Siano: bind infra-red component
Add the infra-red to the makefile and declare
the assignment in the cards components.

[mchehab@redhat.com: Fixed a few trivial merge conflicts]
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:31 -03:00
Uri Shkolnik 3b2d18efd1 V4L/DVB (11814): Siano: smscards - add gpio look-up table
Add gpio look-up table for various requirements, any
target may select any gpio and assign it to a function

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:31 -03:00
Michael Krufky 05860f2d96 V4L/DVB (10752): sms1xxx: load smsdvb module automatically based on device id
The smsdvb module was separated from the core and usb code. This change loads
smsdvb automatically for driver configurations that depend on it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:01 -03:00
Michael Krufky 841a3f0de9 V4L/DVB (10749): sms1xxx: move smsusb_id_table into smsusb.c
Move the usb_device_id table to the smsusb module in preparation for the
sms1xxx module to be split into sub-modules. This will allow the smsusb
driver to start up automatically upon insertion of the USB device.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:00 -03:00
Michael Krufky d54093afb1 V4L/DVB (10746): sms1xxx: enable rf switch on Hauppauge Tiger devices
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:00 -03:00
Michael Krufky dff65740e0 V4L/DVB (9737): sms1xxx: enable LNA control on Hauppauge WinTV MiniCard
Power the LNA while the frontend is in use.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:14 -02:00
Michael Krufky 7b29e10d60 V4L/DVB (9739): sms1xxx: enable signal quality indicator LEDs on Hauppauge WinTV MiniStick
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:41 -02:00
Michael Krufky 7a6fbed650 V4L/DVB (9736): sms1xxx: enable power LED on Hauppauge WinTV MiniStick
Enable power LED while the frontend is in use.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:40 -02:00
Michael Krufky 250fa674fd V4L/DVB (9735): sms1xxx: turn off LEDs after initialization of Hauppauge WinTV MiniStick
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:40 -02:00
Michael Krufky 3f7d99f65a V4L/DVB (9733): sms1xxx: add autodetection support for Hauppauge WinTV MiniCard
add USB IDs for Hauppauge WinTV MiniCard DVB-T

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:40 -02:00
Michael Krufky 09a29b7715 V4L/DVB (8722): sms1xxx: fix typo in license header
This should have read, "GNU General Public License version 2"
rather than, "GNU General Public License version 3"

This was actually a typo mass-blunder -- this is not a change in licence,
as the code was always GPLv2.

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03 18:37:01 -03:00
Michael Krufky 44f71c3fce V4L/DVB (8313): sms1xxx: add support for Hauppauge WinTV-Nova-T-MiniStick
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:24:15 -03:00
Michael Krufky cf1cfe1ba7 V4L/DVB (8302): sms1xxx: fix Siano board names
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:23:25 -03:00
Michael Krufky 02aea4fb64 V4L/DVB (8301): sms1xxx: add capability to define device-specific firmware filenames
Add the capability to define device-specific firmware filenames for the SMS1150,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:23:20 -03:00
Michael Krufky 1c11d546b6 V4L/DVB (8292): sms1xxx: add code to allow device-specific functionality
Set board ID in the usb_device_id table's driver_info field.
Use board name when registering the dvb adapter.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:22:27 -03:00