Commit Graph

73 Commits

Author SHA1 Message Date
Rusty Russell 05ff09706b Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=n
Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n.  Fix this
by introducing a config var for the block device, which depends on
LGUEST && BLOCK.  Do the same for the net driver, rather then depending
gratuitously on CONFIG_NET.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 17:37:45 -07:00
Li Yang ac421852b3 ucc_geth: add ethtool support
The patch enables statistics in ucc_geth and adds ethtool support to
ucc_geth driver.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:38 -04:00
Rusty Russell d503e2fa5a lguest: the net driver
Lguest net driver

A simple net driver for lguest.

[akpm@linux-foundation.org: include fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:53 -07:00
Bryan Wu e190d6b140 Blackfin ethernet driver: on chip ethernet MAC controller driver
This patch implements the driver necessary use the Analog Devices
Blackfin processor's on-chip ethernet MAC controller.

[try#2]
 - add timeout control
 - kill dma_config_reg bitfields
 - some trivial cleanup

[try#3]
 - add endianess check
 - add DRV_NAME, DRV_VERSION... driver information string
 - add some comments for silicon anomaly and dma API confusion
 - some code trivial cleanup

[try#4]
 - add Blackfin latest GPIO pin mux opertion with Michael Hennerich's
  help and Dan's review
 - rewrite the DMA descriptor list operation in a more readable way
  by Joe's review

[try#5]
 - cleanup some coding style by Joe's review.

[try#6]
 - 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji
 - rearrange the desc_list_free function.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-18 18:38:25 -04:00
Jeremy Fitzhardinge 0d16021196 xen: add virtual network device driver
The network device frontend driver allows the kernel to access network
devices exported exported by a virtual machine containing a physical
network device driver.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Ian Pratt <ian.pratt@xensource.com>
Cc: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Keir Fraser <Keir.Fraser@cl.cam.ac.uk>
Cc: netdev@vger.kernel.org
2007-07-18 08:47:45 -07:00
Linus Torvalds 14dc524972 Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  splice: direct splicing updates ppos twice
  more ACSI removal
  umem: Fix match of pci_ids in umem driver
  umem: Remove references to dead CONFIG_MM_MAP_MEMORY variable
  remove the documentation for the legacy CDROM drivers
2007-07-16 10:48:20 -07:00
Adrian Bunk 56a68a500f more ACSI removal
This patch removes some code that became dead code after the ATARI_ACSI
removal.

It also indirectly fixes the following bug introduced by
commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6:

 config ATARI_SLM
        tristate "Atari SLM laser printer support"
-       depends on ATARI && ATARI_ACSI!=n
+       depends on ATARI

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 15:02:47 +02:00
David S. Miller 4c521e422f [SPARC64]: Add Sun LDOM virtual network driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:03:23 -07:00
Patrick McHardy b863ceb7dd [NET]: Add macvlan driver
Add macvlan driver, which allows to create virtual ethernet devices
based on MAC address.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 18:55:06 -07:00
James Chapman 3557baabf2 [L2TP]: PPP over L2TP driver core
This driver handles only L2TP data frames; control frames are handled
by a userspace application. It implements L2TP using the PPPoX socket
family. There is a PPPoX socket for each L2TP session in an L2TP
tunnel.  PPP data within each session is passed through the kernel's
PPP subsystem via this driver. Kernel parameters of each socket can be
read or modified using ioctl() or [gs]etsockopt() calls.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:59 -07:00
Masakazu Mokuno 02c1889166 ps3: gigabit ethernet driver for PS3, take3
Hi,

This is the third submission of the network driver for PS3.
The differences from the previous one are:

  - renamed source file names so that their prefix can match
    with the module name
  - added cbe-oss-dev@ozlabs.org line for MAINTAINER file
  - changed some in copyright comments

If there are no more comments, please apply for 2.6.23.

Thank you

--
Subject: PS3: Ethernet driver

From: Masakazu Mokuno <mokuno@sm.sony.co.jp>

Add Gigabit Ethernet support for the PS3 game console.  The module will
be called ps3_gelic.

CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10 14:13:46 -04:00
Jeff Garzik e1abecc489 Remove sk98lin ethernet driver.
Unmaintained, superceded by skge.

Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10 12:58:33 -04:00
Ben Dooks 825a2ff189 AX88796 network driver
Support for the Asix AX88796 network controller, an
NE2000 compatible 10/100 ethernet device with internal
PHY.

The driver supports PHY settings via either ioctl() or
the ethtool driver ops.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10 12:41:08 -04:00
Thomas Bogendoerfer f2ec803008 Ethernet driver for EISA only SNI RM200/RM400 machines
Changes to last version:
- spelling fix
- cleaned up probe code

Thomas.

Ethernet driver for EISA only SNI RM200/RM400 machines

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:46 -04:00
Linus Torvalds de5603748a Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
  IB: Put rlimit accounting struct in struct ib_umem
  IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
2007-05-09 19:40:09 -07:00
Jeff Garzik 5b2fc49991 Move USB network drivers to drivers/net/usb.
It is preferable to group drivers by usage (net, scsi, ATA, ...) than
by bus.  When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer
is probably less qualified on networking issues than a networking
maintainer.  Also, from a practical standpoint, chips often
appear on multiple buses, which is why we do not put drivers into
drivers/pci/net.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09 21:31:55 -04:00
Roland Dreier 225c7b1fee IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
Add an InfiniBand driver for Mellanox ConnectX adapters.  Because
these adapters can also be used as ethernet NICs and Fibre Channel 
HBAs, the driver is split into two modules: 
 
  mlx4_core: Handles low-level things like device initialization and 
    processing firmware commands.  Also controls resource allocation 
    so that the InfiniBand, ethernet and FC functions can share a 
    device without stepping on each other. 
 
  mlx4_ib: Handles InfiniBand-specific things; plugs into the 
    InfiniBand midlayer. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:38 -07:00
Kim Phillips 728de4c927 ucc_geth: migrate ucc_geth to phylib
migrate ucc_geth to use the common phylib code.

There are several side effects from doing this:

o deprecate 'interface' property specification present
  in some old device tree source files in
  favour of a split 'max-speed' and 'interface-type'
  description to appropriately match definitions
  in include/linux/phy.h.  Note that 'interface' property
  is still honoured if max-speed or interface-type
  are not present (backward compatible).
o compile-time CONFIG_UGETH_HAS_GIGA is eliminated
  in favour of probe time speed derivation logic.
o adjust_link streamlined to only operate on maccfg2
  and upsmr.r10m, instead of reapplying static initial
  values related to the interface-type.
o Addition of UEC MDIO of_platform driver requires
  platform code add 'mdio' type to id list
  prior to calling of_platform_bus_probe (separate patch).
o ucc_struct_init introduced to reduce ucc_geth_startup
  complexity.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Johannes Berg 2a5e1c0eb9 [WIRELESS]: Refactor wireless Kconfig.
This patch refactors the wireless Kconfig all over and already
introduces net/wireless/Kconfig with just the WEXT bit for now,
the cfg80211 patch will add to that as well.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:40 -07:00
Jay Cliburn f3cc28c797 Add Attansic L1 ethernet driver.
This driver is a modified version of the Attansic reference driver
for the L1 ethernet adapter.  Attansic has granted permission for
its inclusion in the mainline kernel.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-08 10:42:37 -05:00
Olof Johansson f5cd787276 PA Semi PWRficient Ethernet driver
Driver for the PA Semi PWRficient on-chip Ethernet (1/10G)

Basic enablement, will be complemented with performance enhancements
over time. PHY support will be added as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:52 -05:00
Adrian Bunk 83d98b401c remove the broken OAKNET driver
The OAKNET driver:
- has been marked as BROKEN for more than two years and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:47 -05:00
Divy Le Ray 4d22de3e6c Add support for the latest 1G/10G Chelsio adapter, T3.
This driver is required by the Chelsio T3 RDMA driver posted by
Steve Wise.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:46 -05:00
Adrian Bunk 95f48a71a2 remove the broken SKMC driver
The SKMC driver has:
- already been marked as BROKEN in 2.6.0 three years ago and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:46 -05:00
Cesar Eduardo Barros bf34570729 driver for Silan SC92031 netdev
This is a driver for the Silan SC92031/Rsltek 8139D NIC chip.

This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC
[1], which came with a mini-CD with the 2.4 driver.  A slightly older
version of the driver was found at [2].  The main difference between them
is that the newer one has a small bugfix in the RX path, a lot of
gratuitous renaming of functions, all the printable strings changed to show
as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031.  The
driver on this patch is a rewrite of the vendor drivers (based mostly on
the older one).

Changes from the previous patch sent to netdev:
- Use MMIO instead of PIO
- Changed TX bounce buffers allocation
- Use skb_copy_and_csum_dev
- Several small bug fixes
- Tested for more than just a few minutes each time

[1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more
    information
[2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at
    http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html
[3] To compile on 2.6.17, simply add back the last argument to the
    interrupt handler in two places, and copy the boolean declarations
    from 2.6.19

[akpm@osdl.org: build fixes]
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:45 -05:00
Haavard Skinnemoen 89e5785fc8 [PATCH] Atmel MACB ethernet driver
Driver for the Atmel MACB on-chip ethernet module.

Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works
with AT91SAM9260 as well, and it may be possible to share some code with
the at91_ether driver for AT91RM9200.

Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Changes since previous version:
  * Probe for PHY ID instead of depending on it being provided through
    platform_data.
  * Grab initial ethernet address from the MACB registers instead
    of depending on platform_data.
  * Set MII/RMII mode correctly.

These changes are mostly about making the driver more compatible with
the at91 infrastructure.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:12:04 -05:00
Zang Roy-r61911 5e123b844a [PATCH] Add tsi108/9 On Chip Ethernet device driver support
Add tsi108/9 on chip Ethernet controller driver support.

The driver code collects the feedback of previous posting form the mailing
list and gives the update.

MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge.

The following is a brief description of the Ethernet controller:

The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
Gigabit Ethernet ports,E0 and E1.  It uses a single Management interface to
manage the two physical connection devices (PHYs).  Each Ethernet port has
its own statistics monitor that tracks and reports key interface
statistics.  Each port supports a 256-entry hash table for address
filtering.  In addition, each port is bridged to the Switch Fabric through
a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.

Each Ethernet port also has a pair of internal Ethernet DMA channels to
support the transmit and receive data flows.  The Ethernet DMA channels use
descriptors set up in memory, the memory map of the device, and access via
the Switch Fabric.  The Ethernet Controller’s DMA arbiter handles
arbitration for the Switch Fabric.  The Controller also has a register bus
interface for register accesses and status monitor control.

The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
modes.  The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
The GMII and TBI modes are used to connect with Gigabit PMDs.  Internal
data flows to and from the Ethernet Controller through the Switch Fabric.
Each

Ethernet port uses its transmit and receive DMA channels to manage data
flows through buffer descriptors that are predefined by the system (the
descriptors can exist anywhere in the system memory map).  These
descriptors are data structures that point to buffers filled with data
ready to transmit over Ethernet, or they point to empty buffers ready to
receive data from Ethernet.

Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com>
Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:12:03 -05:00
Amit S. Kale 3d396eb17e Add NetXen 1G/10G ethernet driver.
Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:11:58 -05:00
Al Viro 3470cb1d4f [PATCH] 8390 fixes - the final chunk (h8300)
The rest of 8390 conversions; ifdef cascade in 8390.h is gone now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:11:56 -05:00
Al Viro 8c6270f957 [PATCH] 8390 fixes - m68k oddballs
more 8390 conversions - mac8390, zorro8390 and hydra got the same treatment
as arm etherh; one more case in 8390.h ifdef cascade is gone.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:11:56 -05:00
Al Viro 6c3561b0c1 [PATCH] beginning of 8390 fixes - generic and arm/etherh
etherh and a handful of other odd drivers use different macros when building
8390.c.  Since we generate a single 8390.o and then link with it, in any
config with both oddball and normal 8390-based driver we will end up with
breakage in at least one of them.  Solution: take most of 8390.c into
lib8390.c and have 8390.c, etherh.c and the rest of oddballs #include it.
Helper macros are taken from 8390.h to whoever includes lib8390.c.  That
way odd drivers get separate instances of compiled 8390 stuff and stop
stepping on each other's toes.  8390.h gets cleaned up - we don't have
the cascade of ifdefs in there and are left with the stuff that can be
used by any 8390-based driver.  Current problems are exactly because of
that cascade - we attempt to choose the set of helpers by looking at config
and that, of course, doesn't work well when we have several sets needed
by various drivers in our config.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:11:56 -05:00
Ralf Baechle ff2a2e0172 [NET] GT96100: Delete bitrotting ethernet driver
Code for the EV96100 evaluation board hasn't compiled since at least
November 15, 2003, so it is being deleted as of 2.6.18 due to lack of
a user base.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-22 20:15:30 -04:00
Jan-Bernd Themann 7a29108322 [PATCH] ehea: IBM eHEA Ethernet Device Driver
Hi Jeff,

I fixed the __iomem issue and tested the driver with sparse. Looks good so far.
Thanks for your effort.

Jan-Bernd Themann

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>

 drivers/net/Kconfig             |    9
 drivers/net/Makefile            |    1
 drivers/net/ehea/Makefile       |    6
 drivers/net/ehea/ehea.h         |  447 ++++++
 drivers/net/ehea/ehea_ethtool.c |  294 ++++
 drivers/net/ehea/ehea_hcall.h   |   51
 drivers/net/ehea/ehea_hw.h      |  287 ++++
 drivers/net/ehea/ehea_main.c    | 2654 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/ehea/ehea_phyp.c    |  705 ++++++++++
 drivers/net/ehea/ehea_phyp.h    |  455 ++++++
 drivers/net/ehea/ehea_qmr.c     |  582 ++++++++
 drivers/net/ehea/ehea_qmr.h     |  358 +++++
 12 files changed, 5849 insertions(+)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:23:52 -04:00
Jeff Garzik 846050dd49 Merge branch 'upstream-fixes' into upstream 2006-08-19 17:45:11 -04:00
Li Yang ce973b141d [PATCH] Freescale QE UCC gigabit ethernet driver
QE(QUICC Engine) is a new generation communication coprocessor, which can
be found on some of the latest Freescale PowerQUICC CPUs(e.g.  MPC8360).
The UCC(Unified Communications Controller) module of QE can work as gigabit
Ethernet device.  This patch provides driver for the device.

Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Ron Mercer 5a4faa8737 [PATCH] qla3xxx NIC driver
This is a complementary network driver for our ISP4XXX parts.

There is a concurrent effort underway to get the iSCSI driver (qla4xxx)
integrated upstream as well.

I have been through several iterations with the linux-netdev list and have had
much response from Stephen Hemminger.

- Built and tested using kernel 2.6.17-rc4.

- The chip supports two ethernet and two iSCSI functions.

- The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and
  ql_wait_for_drvr_lock are used to protect resources that are shared across
  the network and iSCSI functions.  This protection is mostly during chip
  initialization and resets, but also include link management.

- The PHY/MII are not exported through ethtool due to the fact that the
  iSCSI function will control the common link at least 50% of the time.

This driver has been through several iterations on the netdev list and we feel
this driver is ready for inclusion in the upstream kernel.

It has been built and tested on x86 and PPC64 platforms.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 00:28:51 -04:00
Ralf Baechle b6e37e55c2 [PATCH] Cleanup SLHC configuration
Convert selection of serial line header compression to use CONFIG_SLHC
rather than makefile ifeq uglyness.  This makes it easier to select
the SLHC module from other code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-19 13:50:39 -04:00
Sascha Hauer 92aa674d72 [PATCH] network driver for Hilscher netx
This is a patch for the Hilscher netx builtin ethernet ports. The
netx board support was merged into 2.6.17-git2.
The netx is a arm926 based SoC.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

--
 drivers/net/Kconfig             |   11
 drivers/net/Makefile            |    1
 drivers/net/netx-eth.c          |  516 ++++++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-netx/eth.h |   27 ++
 4 files changed, 555 insertions(+)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 23:28:05 -04:00
Brice Goglin 0da34b6dfe [PATCH] Add Myri-10G Ethernet driver
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew J. Gallatin <gallatin@myri.com>

 drivers/net/Kconfig                            |   17
 drivers/net/Makefile                           |    1
 drivers/net/myri10ge/Makefile                  |    5
 drivers/net/myri10ge/myri10ge.c                | 2851 +++++++++++++++
 drivers/net/myri10ge/myri10ge_mcp.h            |  205 +
 drivers/net/myri10ge/myri10ge_mcp_gen_header.h |   58
 include/linux/pci_ids.h                        |    1
 7 files changed, 3138 insertions(+)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 00:27:31 -04:00
Dustin McIntire 0a0c72c911 [PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips
>
> The patch was badly wordwrapped.  Please fix and resend.
>

OK, I've fixed the wrapping and removed the CONFIG_ARM restriction.  I've also did my
best to modify the C style to conform to the comments.

I noticed that the patch is getting ignored by majordomo due to its size >100K.
Should it be broken up somehow to allow posting to the lists?

Signed-off-by: Dustin McIntire <dustin@sensoria.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-20 17:38:39 -04:00
Jens Osterkamp d97381702d [PATCH] fix spidernet build issue
<unchangelogged>

Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:28:04 -05:00
Jamal Hadi Salim 253af4235d [NET]: Add IFB (Intermediate Functional Block) network device.
A new device to do intermidiate functional block in a system shared
manner.  To use the new functionality, you need to turn on
qos/classifier actions.

The new functionality can be grouped as:

1) qdiscs/policies that are per device as opposed to system wide.  ifb
allows for a device which can be redirected to thus providing an
impression of sharing.

2) Allows for queueing incoming traffic for shaping instead of
dropping.

Packets are redirected to this device using tc/action mirred redirect
construct. If they are sent to it by plain routing instead then they
will merely be dropped and the stats would indicate that.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-09 14:16:23 -08:00
Lennert Buytenhek 15d014d131 [PATCH] intel ixp2000 network driver
The way the hardware and firmware work is that there is one shared RX
queue and IRQ for a number of different network interfaces.  Due to this,
we would like to process received packets for every interface in the same
NAPI poll handler, so we need a pseudo-device to schedule polling on.

What the driver currently does is that it always schedules polling for
the first network interface in the list, and processes packets for every
interface in the poll handler for that first interface -- however, this
scheme breaks down if the first network interface happens to not be up,
since netif_rx_schedule_prep() checks netif_running().

sky2 apparently has the same issue, and Stephen Hemminger suggested a
way to work around this: create a variant of netif_rx_schedule_prep()
that does not check netif_running().  I implemented this locally and
called it netif_rx_schedule_prep_notup(), and it seems to work well,
but it's something that probably not everyone would be happy with.

The ixp2000 is an ARM CPU with a high-speed network interface in the
CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.)
The CPU package also contains 8 or 16 (again depending on the IXP
model) 'microengines', which are somewhat primitive but very fast
and efficient processor cores which can be used to offload various
things from the main CPU.

This driver makes the high-speed network interface in the CPU visible
and usable as a regular linux network device.  Currently, it only
supports the Radisys ENP2611 IXP board, but adding support for other
board types should be fairly easy.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:32:22 -05:00
Andy Fleming 7f7f53168d [PATCH] Gianfar update and sysfs support
This seems to have gotten lost, so I'll resend.

Signed-off-by: Andy Fleming <afleming@freescale.com>

* Added sysfs support to gianfar for modifying FIFO and stashing parameters
* Updated driver to support 10 Mbit, full duplex operation
* Improved comments throughout
* Cleaned up and optimized offloading code
* Fixed a bug where rx buffers were being improperly mapped and unmapped
* (only manifested if cache-coherency was off)
* Added support for using the eTSEC exact-match MAC registers
* Bumped the version to 1.3
* Added support for distinguishing between reduced 100 and 10 Mbit modes
* Modified default coalescing values to lower latency
* Added documentation
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:31:26 -05:00
Jeff Garzik 3b621ee5df Merge branch 'master' 2005-11-11 05:51:24 -05:00
Matt Domsch b3f9b92a6e [PPP]: add PPP MPPE encryption module
From: Matt Domsch <Matt_Domsch@dell.com>

The patch below implements the Microsoft Point-to-Point Encryption method
as a PPP compressor/decompressor.  This is necessary for Linux clients and
servers to interoperate with Microsoft Point-to-Point Tunneling Protocol
(PPTP) servers (either Microsoft PPTP servers or the poptop project) which
use MPPE to encrypt data when creating a VPN.

This patch differs from the kernel_ppp_mppe DKMS pacakge at
pptpclient.sourceforge.net by utilizing the kernel crypto routines rather
than providing its own SHA1 and arcfour implementations.

Minor changes to ppp_generic.c try to prevent a link from disabling
compression (in our case, the encryption) after it has started using
compression (encryption).

Feedback to <pptpclient-devel@lists.sourceforge.net> please.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: James Cameron <james.cameron@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 09:40:47 -08:00
Jeff Garzik 7211bb9b64 Merge branch 'master' 2005-11-05 15:39:24 -05:00
Pantelis Antoniou 48257c4f16 Add fs_enet ethernet network driver, for several embedded platforms. 2005-10-28 16:25:58 -04:00
Jeff Garzik 9089068785 Merge branch 'master' 2005-10-28 12:17:52 -04:00
Ralf Baechle dcbf847756 [PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00