Commit Graph

865 Commits

Author SHA1 Message Date
Kazuhisa Ichikawa af498d7fa3 block: fix the bio_vec array index out-of-bounds test
Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-12 13:27:45 +02:00
Jens Axboe f2d1f0ae78 cfq-iosched: cache prio_tree root in cfqq->p_root
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe 3ac6c9f8a6 cfq-iosched: fix bug with aliased request and cooperation detection
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.

cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe 26a2ac009c cfq-iosched: clear ->prio_trees[] on cfqd alloc
Not strictly needed, but we should make it clear that we init the
rbtree roots here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Hannes Reinecke 17d5c8ca75 block: fix intermittent dm timeout based oops
Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame.  This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window).  Fix this by splicing back from
the ususally empty list to the q->timeout_list.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:21 +02:00
Jerome Marchand 42dad7647a block: simplify I/O stat accounting
This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:21 +02:00
Jeff Moyer 04dc6e71a2 cfq-iosched: use the default seek distance when there aren't enough seek samples
If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jeff Moyer 4d00aa47e2 cfq-iosched: make seek_mean converge more quickly
Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jens Axboe b759113499 block: make blk_abort_queue() ignore non-request based devices
There's nothing to do for those devices, since the timeout handling is
based on requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:10 +02:00
Tejun Heo 71982a409f block: include empty disks in /proc/diskstats
/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions.  Commit
074a7aca7a accidentally changed the
behavior such that it doesn't print out zero sized disks.  This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.

Reported and bisectd by Dianel Collins.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:10 +02:00
Tejun Heo cd0aca2d55 block: fix queue bounce limit setting
Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily

All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that.  However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.

As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer.  Fix it.  While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:09 +02:00
Tejun Heo 25636e282f block: fix SG_IO vector request data length handling
Impact: fix SG_IO behavior such that it matches the documentation

SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins.  However, the current implementation returns -EINVAL
for such cases.  Trim iovc if it's longer than ->dxfer_len.

This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it.  sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:09 +02:00
Jens Axboe a36e71f996 cfq-iosched: add close cooperator code
If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.

The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.

This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.

Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:15:11 +02:00
Jens Axboe 9481ffdc61 cfq-iosched: log responsible 'cfqq' in idle timer arm
Makes it easier to read the traces.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:14:13 +02:00
Jens Axboe 2d87072296 cfq-iosched: tweak kick logic a bit more
We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:12:46 +02:00
Jens Axboe 40bb54d197 cfq-iosched: no need to save interrupts in cfq_kick_queue()
It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:11:10 +02:00
Nikanth Karthikesan 15afd1cc7b block: Remove code handling bio_alloc failure with __GFP_WAIT
Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:12 +02:00
FUJITA Tomonori 91e463c8f5 block: fix SG_IO to return a proper error value
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid
address to kernel. SG_IO path needs to pass the returned value to user
space instead of ignoring it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:11 +02:00
Jens Axboe d6ceb25e8d cfq-iosched: don't delay queue kick for a merged request
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit
b029195dda introduced a regression
of about 50% with sequential threaded read workloads. The test
case is:

tiotest -k0 -k1 -k3 -f 80 -t 32

which starts 32 threads each reading a 80MB file. Twiddle the kick
queue logic so that we do start IO immediately, if it appears to be
a fully merged request. We can't really detect that, so just check
if the request is bigger than a page or not. The assumption is that
since single bio issues will first queue a single request with just
one page attached and then later do merges on that, if we already
have more than a page worth of data in the request, then the request
is most likely good to go.

Verified that this doesn't cause a regression with the test case that
commit b029195dda was fixing. It does not,
we still see maximum sized requests for the queue-then-merge cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:12 +02:00
Jens Axboe 1d6bfbdf38 as-iosched: get rid of private REQ_SYNC/REQ_ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe ff6657c6c8 cfq-iosched: get rid of private SYNC/ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe b0b78f81a5 cfq-iosched: use rw_is_sync() to see if rw flags are sync or not
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe f600abe2de block: fix bad spelling of quiesce
Credit goes to Andrew Morton for spotting this one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:09 +02:00
Linus Torvalds c93f216b5b Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
  branch tracer: Fix for enabling branch profiling makes sparse unusable
  ftrace: Correct a text align for event format output
  Update /debug/tracing/README
  tracing/ftrace: alloc the started cpumask for the trace file
  tracing, x86: remove duplicated #include
  ftrace: Add check of sched_stopped for probe_sched_wakeup
  function-graph: add proper initialization for init task
  tracing/ftrace: fix missing include string.h
  tracing: fix incorrect return type of ns2usecs()
  tracing: remove CALLER_ADDR2 from wakeup tracer
  blktrace: fix pdu_len when tracing packet command requests
  blktrace: small cleanup in blk_msg_write()
  blktrace: NUL-terminate user space messages
  tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
2009-04-07 14:10:10 -07:00
Linus Torvalds 6a5d263866 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  loop: mutex already unlocked in loop_clr_fd()
  cfq-iosched: don't let idling interfere with plugging
  block: remove unused REQ_UNPLUG
  cfq-iosched: kill two unused cfqq flags
  cfq-iosched: change dispatch logic to deal with single requests at the time
  mflash: initial support
  cciss: change to discover first memory BAR
  cciss: kernel scan thread for MSA2012
  cciss: fix residual count for block pc requests
  block: fix inconsistency in I/O stat accounting code
  block: elevator quiescing helpers
2009-04-07 11:06:41 -07:00
Linus Torvalds 132ea5e9aa Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: shorten register names
  sata_mv: workaround errata SATA#13
  sata_mv: cosmetic renames
  sata_mv: workaround errata SATA#26
  sata_mv: workaround errata PCI#7
  sata_mv: replace 0x1f with ATA_PIO4 (v2)
  sata_mv: fix irq mask races
  sata_mv: revert SoC irq breakage
  libata: ahci enclosure management bios workaround
  ata: Add TRIM infrastructure
  ata_piix: VGN-BX297XP wants the controller power up on suspend
  libata: Remove some redundant casts from pata_octeon_cf.c
  pata_artop: typo
2009-04-07 08:53:02 -07:00
Jens Axboe b029195dda cfq-iosched: don't let idling interfere with plugging
When CFQ is waiting for a new request from a process, currently it'll
immediately restart queuing when it sees such a request. This doesn't
work very well with streamed IO, since we then end up splitting IO
that would otherwise have been merged nicely. For a simple dd test,
this causes 10x as many requests to be issued as we should have.
Normally this goes unnoticed due to the low overhead of requests
at the device side, but some hardware is very sensitive to request
sizes and there it can cause big slow downs.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 11:38:31 +02:00
Jens Axboe 2385327725 block: remove unused REQ_UNPLUG
The request inherits the unplug flag from the bio, but it isn't actually
used. The bio flag stops at __make_request(), which tells it to unplug
after submission. Passing it on to the request doesn't make any sense.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:59:11 +02:00
Jens Axboe 75e50984f0 cfq-iosched: kill two unused cfqq flags
We only manipulate the must_dispatch and queue_new flags, they are not
tested anymore. So get rid of them.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:56:14 +02:00
Jens Axboe 2f5cb7381b cfq-iosched: change dispatch logic to deal with single requests at the time
The IO scheduler core calls into the IO scheduler dispatch_request hook
to move requests from the IO scheduler and into the driver dispatch
list. It only does so when the dispatch list is empty. CFQ moves several
requests to the dispatch list, which can cause higher latencies if we
suddenly have to switch to some important sync IO. Change the logic to
move one request at the time instead.

This should almost be functionally equivalent to what we did before,
except that we now honor 'quantum' as the maximum queue depth at the
device side from any single cfqq. If there's just a single active
cfqq, we allow up to 4 times the normal quantum.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:51:19 +02:00
Jerome Marchand 26308eab69 block: fix inconsistency in I/O stat accounting code
This forces in_flight to be zero when turning off or on the I/O stat
accounting and stops updating I/O stats in attempt_merge() when
accounting is turned off.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:12:38 +02:00
Jens Axboe 6c7e8cee6a block: elevator quiescing helpers
Simple helper functions to quiesce the request queue. These are
currently only used for switching IO schedulers on-the-fly, but
we can use them to properly switch IO accounting on and off as well.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:12:37 +02:00
Alan Cox 8feb4d20b4 pata_artop: typo
Fix a typo (this was in the original patch but was not merged when the code
fixes were for some reason)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06 20:00:29 -04:00
Jens Axboe aeb6fafb8f block: Add flag for telling the IO schedulers NOT to anticipate more IO
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe 644b2d99b7 block: enabling plugging on SSD devices that don't do queuing
For the older SSD devices that don't do command queuing, we do want to
enable plugging to get better merging.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe 1faa16d228 block: change the request allocation/congestion logic to be sync/async based
This makes sure that we never wait on async IO for sync requests, instead
of doing the split on writes vs reads.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:53 -07:00
Linus Torvalds 714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Linus Torvalds 90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
Linus Torvalds b1dbb67911 Merge branch 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  s390: remove arch specific smp_send_stop()
  panic: clean up kernel/panic.c
  panic, smp: provide smp_send_stop() wrapper on UP too
  panic: decrease oops_in_progress only after having done the panic
  generic-ipi: eliminate WARN_ON()s during oops/panic
  generic-ipi: cleanups
  generic-ipi: remove CSD_FLAG_WAIT
  generic-ipi: remove kmalloc()
  generic IPI: simplify barriers and locking
2009-04-03 17:33:30 -07:00
Li Zefan e2494e1b42 blktrace: fix pdu_len when tracing packet command requests
Impact: output all of packet commands - not just the first 4 / 8 bytes

Since commit d7e3c3249e ("block: add
large command support"), struct request->cmd has been changed from
unsinged char cmd[BLK_MAX_CDB] to unsigned char *cmd.

v1 -> v2: by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

- make sure rq->cmd_len is always intialized, and then we can use
  rq->cmd_len instead of BLK_MAX_CDB.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49D4507E.2060602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 15:29:26 +02:00
Ingo Molnar 8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Ingo Molnar 65fb0d23fc Merge branch 'linus' into cpumask-for-linus
Conflicts:
	arch/x86/kernel/cpu/common.c
2009-03-30 23:53:32 +02:00
Linus Torvalds 7c730ccdc1 Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
  percpu: fix spurious alignment WARN in legacy SMP percpu allocator
  percpu: generalize embedding first chunk setup helper
  percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
  percpu: make x86 addr <-> pcpu ptr conversion macros generic
  linker script: define __per_cpu_load on all SMP capable archs
  x86: UV: remove uv_flush_tlb_others() WARN_ON
  percpu: finer grained locking to break deadlock and allow atomic free
  percpu: move fully free chunk reclamation into a work
  percpu: move chunk area map extension out of area allocation
  percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
  x86, percpu: setup reserved percpu area for x86_64
  percpu, module: implement reserved allocation and use it for module percpu variables
  percpu: add an indirection ptr for chunk page map access
  x86: make embedding percpu allocator return excessive free space
  percpu: use negative for auto for pcpu_setup_first_chunk() arguments
  percpu: improve first chunk initial area map handling
  percpu: cosmetic renames in pcpu_setup_first_chunk()
  percpu: clean up percpu constants
  x86: un-__init fill_pud/pmd/pte
  x86: remove vestigial fix_ioremap prototypes
  ...

Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
2009-03-28 13:48:38 -07:00
Linus Torvalds d54b3538b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits)
  [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
  [SCSI] mpt2sas: make global symbols unique
  [SCSI] sd: Make revalidate less chatty
  [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices
  [SCSI] sd: Refactor sd_read_capacity()
  [SCSI] mpt2sas v00.100.11.15
  [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h
  [SCSI] ch: Add scsi type modalias
  [SCSI] 3w-9xxx: add power management support
  [SCSI] bsg: add linux/types.h include to bsg.h
  [SCSI] cxgb3i: fix function descriptions
  [SCSI] libiscsi: fix possbile null ptr session command cleanup
  [SCSI] iscsi class: remove host no argument from session creation callout
  [SCSI] libiscsi: pass session failure a session struct
  [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
  [SCSI] iscsi lib: have lib create work queue for transmitting IO
  [SCSI] iscsi class: fix lock dep warning on logout
  [SCSI] libiscsi: don't cap queue depth in iscsi modules
  [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging
  [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging
  ...
2009-03-28 13:30:43 -07:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Boaz Harrosh e7cbbf1bf1 bsg: Remove bogus check against request_queue->max_sectors
bsg submits REQ_TYPE_BLOCK_PC so the right check is max_hw_sectors.
But I've removed this check because right after, bsg proceeds with
calling blk_rq_map_user() which does all the right checks.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-26 11:01:25 +01:00
Boaz Harrosh 1cd96c242a block: WARN in __blk_put_request() for potential bio leak
Put a WARN_ON in __blk_put_request if it is about to
leak bio(s). This is a serious bug that can happen in error
handling code paths.

For this to work I have fixed a couple of places in block/ where
request->bio != NULL ownership was not honored. And a small cleanup
at sg_io() while at it.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-26 11:01:23 +01:00
Boaz Harrosh 05378940ca bsg: add support for tail queuing
Currently inherited from sg.c bsg will submit asynchronous request
 at the head-of-the-queue, (using "at_head" set in the call to
 blk_execute_rq_nowait()). This is bad in situation where the queues
 are full, requests will execute out of order, and can cause
 starvation of the first submitted requests.

The sg_io_v4->flags member is used and a bit is allocated to denote the
Q_AT_TAIL. Zero is to queue at_head as before, to be compatible with old
code at the write/read path. SG_IO code path behavior was changed so to
be the same as write/read behavior. SG_IO was very rarely used and breaking
compatibility with it is OK at this stage.

sg_io_hdr at sg.h also has a flags member and uses 3 bits from the first
nibble and one bit from the last nibble. Even though none of these bits
are supported by bsg, The second nibble is allocated for use by bsg. Just
in case.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:17 +01:00
Jens Axboe 50e1749310 block: get rid of unused blkdev_free_rq() define
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:16 +01:00
Jens Axboe f3b144aa7f block: remove various blk_queue_*() setting functions in blk_init_queue_node()
It calls blk_queue_make_request(), which sets the identical set of limits.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:16 +01:00