Commit Graph

1388 Commits

Author SHA1 Message Date
Peter Ujfalusi 2dcdf57093 dmaengine: omap: Add support for pause/resume in cyclic dma mode
The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA.
This method has been used for years on OMAP based products.
We only allow pause/resume when the DMA has been configured in cyclic mode
which is used by the audio stack.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22 11:12:40 -04:00
Peter Ujfalusi ccffa3870a dmaengine: omap: Support for element mode in cyclic DMA
When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA
(mostly audio) indicates that we should configure the omap DMA to element
sync mode instead of packet mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22 11:12:35 -04:00
Olof Johansson e3a66aa33a Merge branch 'multiplatform/platform-data' into next/multiplatform
* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 01:07:21 -07:00
Arnd Bergmann c02cecb92e ARM: orion: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the orion include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
2012-09-19 17:42:17 +02:00
Sachin Kamat 61c6e7531d DMA: PL330: Check the pointer returned by kzalloc
kzalloc could return NULL. Hence add a check to avoid
NULL pointer dereference.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 09:04:52 +05:30
Sachin Kamat 2e2c682bec DMA: PL330: Fix potential NULL pointer dereference in pl330_submit_req()
'r->cfg' is being checked for NULL. However, it is dereferenced
in the previous statements. Thus moving those statements within
the check.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 09:04:52 +05:30
Inderpal Singh 0274788517 DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources
Since 0 is not considered as error at dmaengine level, return ENOMEM
from pl330_alloc_chan_resources in case of failure.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 09:01:39 +05:30
Inderpal Singh 7c71b8eb26 DMA: PL330: Remove redundant runtime_suspend/resume functions
The driver's  runtime_suspend/resume functions just disable/enable
the clock which is already being managed at AMBA bus level
runtime_suspend/resume functions.

Hence, remove the driver's runtime_suspend/resume functions.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Tested-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 08:59:52 +05:30
Inderpal Singh faf6fbc6f2 DMA: PL330: Remove controller clock enable/disable
The controller clock is being enabled/disabled in AMBA bus
infrastructre in probe/remove functions. Hence, its not required
at driver level probe/remove.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Tested-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 08:59:52 +05:30
Wei Yongjun 921eeadbbd dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-18 08:55:17 +05:30
Arnd Bergmann 293b2da1b6 ARM: pxa: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the pxa include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Acked-By: Stefan Schmidt <stefan@openezx.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Cc: Harald Welte <laforge@openezx.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Tomas Cech <sleep_walker@suse.cz>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: openezx-devel@lists.openezx.org
2012-09-14 11:18:10 +02:00
Arnd Bergmann 82906b13a6 ARM: imx: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the imx include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2012-09-14 11:17:21 +02:00
Arnd Bergmann a3b2924547 ARM: ep93xx: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the ep93xx include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Axel Lin <axel.lin@gmail.com>
2012-09-14 11:16:55 +02:00
Arnd Bergmann 7cdc39eead ARM: at91: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the at91 include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Dan Williams <djbw@fb.com>
2012-09-14 11:16:40 +02:00
Tushar Behera 5557a419d4 DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
DMA clients pdma0 and pdma1 are internal to the SoC and are used only
by dedicated peripherals. Since they cannot be used for generic
purpose, their capability should be set as DMA_PRIVATE.

CC: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:42:08 +05:30
Wei Yongjun 2cc44e6318 dma: tegra: use list_move_tail instead of list_del/list_add_tail
Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:38:10 +05:30
Marek Vasut 5e97fa9149 mxs/dma: Enlarge the CCW descriptor area to 4 pages
In case of a large SPI flash, the amount of DMA descriptors
available to the DMA driver is not large enough anymore. For
example 8MB SPI flash now needs 129 descriptors to be transfered
in one long read. There are currently 53 descriptors available in
one PAGE_SIZE-big block. Enlarge the allocated descriptor area to
four PAGE_SIZE blocks to fulfill such requirements.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dan Williams <djbw@fb.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:31:47 +05:30
Andy Shevchenko 8fccc5bfd7 dw_dmac: utilize slave_id to pass request line
There is slave_id field in the generic slave config structure that is dedicated
for the uniq slave number. In our case we have the request lines wired to the
certain hardware. Therefore the number of the request line is uniq and could be
used as slave_id. It allows us in some cases to drop out the usage of the
custom slave config structure.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:29:46 +05:30
Nicolas Ferre c456797681 dmaengine: at_hdmac: check that each sg data length is non-null
Avoid the construction of a malformed DMA request sent to
the DMA controller.
Log message is for debug only because this condition is unlikely to
append and may only trigger at driver development time.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Stable <stable@vger.kernel.org> [2.6.31+]
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:26:40 +05:30
Nicolas Ferre c618a9be0e dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()
s/dma_memcpy/slave_sg/ and it is sg length that we are
talking about.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Stable <stable@vger.kernel.org> [2.6.31+]
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:26:40 +05:30
Zhangfei Gao f1a7757008 dmaengine: mmp_tdma: add dt support
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:14:08 +05:30
Zhangfei Gao c8acd6aa6b dmaengine: mmp-pdma support
1. virtual channel vs. physical channel
Virtual channel is managed by dmaengine
Physical channel handling resource, such as irq
Physical channel is alloced dynamically as descending priority,
freed immediately when irq done.
The availble highest priority physically channel will alwayes be alloced

Issue pending list -> alloc highest dma physically channel available -> dma done -> free physically channel

2. list: running list & pending list
submit: desc list -> pending list
issue_pending_list: if (IDLE) pending list -> running list; free pending list (RUN)
irq: free running list (IDLE)
     check pendlist -> pending list -> running list; free pending list (RUN)

3. irq:
Each list generate one irq, calling callback
One list may contain several desc chain, in such case, make sure only the last desc list generate irq.

4. async
Submit will add desc chain to pending list, which can be multi-called
If multi desc chain is submitted, only the last desc would generate irq -> call back
If IDLE, issue_pending_list start pending_list, transforming pendlist to running list
If RUN, irq will start pending list

5. test
5.1 pxa3xx_nand on pxa910
5.2 insmod dmatest.ko (threads_per_chan=y)
By default drivers/dma/dmatest.c test every channel and test memcpy with 1 threads per channel

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14 08:14:07 +05:30
Olof Johansson 1a87676206 Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into next/fixes-non-critical
From  "Uwe Kleine-Knig" <u.kleine-koenig@pengutronix.de>:

this is the 2nd version of this series whose goal is to make struct
of_device_id.data const. Conceptually a driver must not modify the data
contained there so making it const is the right thing.

v1 of this series was sent with Message-id:
1342182734-321-1-git-send-email-y. Changes since then are:
 - powerpc fixes
 - several new consts that were found by Arnd that are possible after
   patch 19.

Arnd suggested to take this series via arm-soc late for 3.6 in one go
because patch 19 depends on the former patches but is a precondition to
the latter and it fixes a few warnings. So getting it in via the
respective maintainer trees would need a much bigger coordination
effort. That means I prefer getting Acks over you taking the patch.

Vinod Koul already took
        dmaengine: at_hdmac: add a few const qualifiers
that is in next-20120723 as 7fd63ccdad now. Vinod, I don't follow your
pull requests, but assuming you didn't let it already pull for 3.6 I
suggest you drop it from your queue and I just take your Ack.

This series was build tested for arm (all defconfigs) and powerpc (all
defconfigs and an allyesconfig) and grep didn't find more issues. As
before it introduces a warning in drivers/regulator/twl-regulator.c.
This driver does modify its .of_match_table when a device is bound which
doesn't fits the concept of independant devices. Arnd noticed another
new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve,
because the pointer to (now) const data is passed as first argument to
scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to
get a const, too. Alternatively I could introduce a cast removing the
const, but I don't like that.

* 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits)
  dma: tegra: make data used as *of_device_id.data const
  can: mpc5xxx_can: make data used as *of_device_id.data const
  macintosh/mediabay: make data used as *of_device_id.data const
  i2c/mpc: make data used as *of_device_id.data const
  mfd/da9052: make i2c_device_id array const
  powerpc/fsl_msi: drop unneeded cast to non-const pointer
  gpio/gpio-omap: make platformdata used as *of_device_id.data const
  of: add const to struct *of_device_id.data
  dma: tegra: make tegra_dma.chip_data a pointer to const data
  watchdog/mpc8xxx: add a const qualifier
  powerpc/celleb_pci: add a const qualifier
  powerpc/fsl_msi: add a const qualifier
  powerpc/83xx: add a const qualifier
  macintosh/mediabay: add a const qualifier
  mmc/omap_hsmmc: add a const qualifier
  i2c/mpc: add a const qualifier
  i2c/i2c-omap: add a const qualifier
  gpio/mpc8xxx: add a const qualifier
  gpio/gpio-omap.c: add a const qualifier
  misc/atmel_tc: make atmel_tc.tcb_config member point to const data

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: repulled a v3 version of the branch that rebased to add some more
acked-bys and added one more patch on top for tegra]
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-13 00:15:00 -07:00
Tony Lindgren 7d7e1eba7e ARM: OMAP2+: Prepare for irqs.h removal
As the interrupts should only be defined in the platform_data, and
eventually coming from device tree, there's no need to define them
in header files.

Let's remove the hardcoded references to irqs.h and fix up the includes
so we don't rely on headers included in irqs.h. Note that we're
defining OMAP_INTC_START as 0 to the interrupts. This will be needed
when we enable SPARSE_IRQ. For some drivers we need to add
#include <plat/cpu.h> for now until these drivers are fixed to
remove cpu_is_omapxxxx() usage.

While at it, sort som of the includes the standard way, and add
the trailing commas where they are missing in the related data
structures.

Note that for drivers/staging/tidspbridge we just define things
locally.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12 18:06:30 -07:00
Laxman Dewangan 75f21631bc dma: tegra: make data used as *of_device_id.data const
Since of_device_id.data is declared as a pointer to const data a few
more consts can be added in this driver.

[ukl: split Laxman's patch to prevent warnings in the middle of the
series. Original patch was sent with msgid
1346217447-19730-1-git-send-email-ldewangan@nvidia.com]

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-11 08:57:55 +02:00
Laxman Dewangan 83a1ef2eb6 dma: tegra: make tegra_dma.chip_data a pointer to const data
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:

	drivers/dma/tegra20-apb-dma.c: In function 'tegra_dma_probe':
	drivers/dma/tegra20-apb-dma.c:1210:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]

[ukl: split Laxman's patch to prevent warnings in the middle of the
series. Original patch was sent with msgid
1346217447-19730-1-git-send-email-ldewangan@nvidia.com]

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-11 08:57:26 +02:00
Anatol Pomozov 4907cb7b19 treewide: fix comment/printk/variable typos
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 10:33:05 -07:00
Masanari Iida d73111c6d4 dma: fix comments
Correct spelling typo in drivers/dma.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:57:12 -07:00
Jon Mason ff8dd30f7a ioat: remove unused #defines
IOAT has a redefine of PCI Vendor, PCI Subvendor, etc for
PCI_VENDOR_ID_INTEL but they are never used.  Remove them.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:45:38 -07:00
Matt Porter c2dde5f8f2 dmaengine: add TI EDMA DMA engine driver
Add a DMA engine driver for the TI EDMA controller. This driver
is implemented as a wrapper around the existing DaVinci private
DMA implementation. This approach allows for incremental conversion
of each peripheral driver to the DMA engine API. The EDMA driver
supports slave transfers but does not yet support cyclic transfers.

Signed-off-by: Matt Porter <mporter@ti.com>
Tested-by: Tom Rini <trini@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-01 06:14:02 +05:30
Dave Jiang 8eb4da28b2 ioat: Adding Ivy Bridge IOATDMA PCI device IDs
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <djbw@db.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-31 21:19:51 +05:30
Ulf Hansson b707c65865 dma/ste_dma40: Fixup clock usage during probe
Fixup some errorhandling for clocks during probe and make sure
to use clk_prepare as well as clk_enable.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-31 06:01:55 +05:30
Julia Lawall 983d7beb7d drivers/dma/amba-pl08x.c: fix error return code
Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-22 09:51:04 +05:30
Julia Lawall 94d3901c11 drivers/dma/sirf-dma.c: fix usage of devm functions
Fix some problems with the use of devm_ functions.

devm_kzalloc: devm_kfree is not needed

devm_ioremap: iounmap should not be used, no free is needed

devm_request_irq: the devm_free_irq is followed by irq_dispose_mapping.  I
don't know if it is safe to move the freeing of the irq in this case, so I
have just un-devm'd this function, since the implicit freeing is never
taken advantage of.

In the original code failure of of_address_to_resource jumped to free_mem,
but should have jumped to irq_dispose, since irq_of_parse_and_map has
completed at this point.

In the original code unmap_mem was after irq_dispose, but it should have
been before, again since irq_of_parse_and_map has completed at this point.

One of these problems was found using the following semantic match:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x;
@@

*x = devm_ioremap(...)
...
iounmap(x);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-22 09:17:34 +05:30
Laxman Dewangan ffc493062c dma: tegra: enable/disable dma clock
Enable the DMA clock when allocating channel and
disable clock when freeing channels.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-13 10:15:22 +05:30
Vinod Koul f986ffedd7 Merge branch 'fixes_for-3.6' into fixes 2012-08-06 10:46:37 +05:30
Vinod Koul c87a9fcd1e Merge branch 'fixes_for-3.6' into next 2012-08-05 13:05:03 +05:30
Vinod Koul df3d898c9f Merge branch 'for-3.7' into next 2012-08-05 13:04:33 +05:30
Linus Torvalds 0a276d1675 SuperH fixes for 3.6-rc1 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlAaIN8ACgkQGkmNcg7/o7gpMgCgtmCJeUrSCc/eVKGy5ik1BPnC
 3DAAoLdqCJflwx4mrN48kkXQj9SA4Xko
 =Y6yl
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
  sh: explicitly include sh_dma.h in setup-sh7722.c
  sh: ecovec: care CN5 VBUS if USB host mode
  sh: sh7724: fixup renesas_usbhs clock settings
  sh: intc: initial irqdomain support.
  sh: pfc: Fix up init ordering mess.
  serial: sh-sci: fix compilation breakage, when DMA is enabled
  dmaengine: shdma: restore partial transfer calculation
  sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
  sh: Fix up recursive fault in oops with unset TTB.
  sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
  sh: select the fixed regulator driver on several boards
  sh: ecovec: switch MMC power control to regulators
  sh: add fixed voltage regulators to se7724
  sh: add fixed voltage regulators to sdk7786
  sh: add fixed voltage regulators to rsk
  sh: add fixed voltage regulators to migor
  sh: add fixed voltage regulators to kfr2r09
  sh: add fixed voltage regulators to ap325rxa
  sh: add fixed voltage regulators to sh7757lcr
  sh: add fixed voltage regulators to sh2007
  ...
2012-08-02 11:45:42 -07:00
Linus Torvalds a6dc77254b Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM DMA engine updates from Russell King:
 "This looks scary at first glance, but what it is is:
   - a rework of the sa11x0 DMA engine driver merged during the previous
     cycle, to extract a common set of helper functions for DMA engine
     implementations.
   - conversion of amba-pl08x.c to use these helper functions.
   - addition of OMAP DMA engine driver (using these helper functions),
     and conversion of some of the OMAP DMA users to use DMA engine.

  Nothing in the helper functions is ARM specific, so I hope that other
  implementations can consolidate some of their code by making use of
  these helpers.

  This has been sitting in linux-next most of the merge cycle, and has
  been tested by several OMAP folk.  I've tested it on sa11x0 platforms,
  and given it my best shot on my broken platforms which have the
  amba-pl08x controller.

  The last point is the addition to feature-removal-schedule.txt, which
  will have a merge conflict.  Between myself and TI, we're planning to
  remove the old TI DMA implementation next year."

Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt
and drivers/dma/{Kconfig,Makefile}

* 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits)
  ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine
  ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails
  Add feature removal of old OMAP private DMA implementation
  mtd: omap2: remove private DMA API implementation
  mtd: omap2: add DMA engine support
  spi: omap2-mcspi: remove private DMA API implementation
  spi: omap2-mcspi: add DMA engine support
  ARM: omap: remove mmc platform data dma_mask and initialization
  mmc: omap: remove private DMA API implementation
  mmc: omap: add DMA engine support
  mmc: omap_hsmmc: remove private DMA API implementation
  mmc: omap_hsmmc: add DMA engine support
  dmaengine: omap: add support for cyclic DMA
  dmaengine: omap: add support for setting fi
  dmaengine: omap: add support for returning residue in tx_state method
  dmaengine: add OMAP DMA engine driver
  dmaengine: sa11x0-dma: add cyclic DMA support
  dmaengine: sa11x0-dma: fix DMA residue support
  dmaengine: PL08x: ensure all descriptors are freed when channel is released
  dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking
  ...
2012-08-01 16:41:07 -07:00
Guennadi Liakhovetski 4f46f8ac80 dmaengine: shdma: restore partial transfer calculation
The recent shdma driver split has mistakenly removed support for partial
DMA transfer size calculation on forced termination. This patch restores
it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01 13:48:52 +09:00
Russell King 0e52d987c0 Merge branches 'dma-omap', 'dma-pl08x' and 'dma-sa11x0' into dmaengine 2012-07-31 12:06:43 +01:00
Russell King 3a774ea91a dmaengine: omap: add support for cyclic DMA
Add support for cyclic DMA to the OMAP DMA engine driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 12:06:22 +01:00
Russell King 7c836bc7f9 dmaengine: omap: add support for setting fi
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 12:06:21 +01:00
Russell King 3850e22f51 dmaengine: omap: add support for returning residue in tx_state method
Add support for returning the residue for a particular descriptor by
reading the current DMA address for the source or destination side of
the transfer as appropriate, and walking the scatterlist until we find
an entry containing the current DMA address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 12:06:21 +01:00
Russell King 7bedaa5537 dmaengine: add OMAP DMA engine driver
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 12:06:20 +01:00
Laxman Dewangan fed57cd375 dma: tegra: enable/disable dma clock
Enable the DMA clock when allocating channel and
disable clock when freeing channels.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-31 16:15:05 +05:30
Fabio Estevam a2367db2ec dma: imx-dma: Fix kernel crash due to missing clock conversion
With the new i.MX clock infrastructure we need to request the dma clocks
seperately: ahb and ipg clocks.

This fixes the following kernel crash and make audio to be functional again:

root@freescale /home$ aplay audio48k16S.wav
Playing WAVE 'audio48k16S.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c7b74000
[00000000] *pgd=a7bb5831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in:
CPU: 0    Not tainted  (3.5.0-rc5-next-20120702-00007-g3028b64 #1128)
PC is at snd_dmaengine_pcm_get_chan+0x8/0x10
LR is at snd_imx_pcm_hw_params+0x18/0xdc
pc : [<c02d3cf8>]    lr : [<c02e95ec>]    psr: a0000013
sp : c7b45e30  ip : ffffffff  fp : c7ae58e0
r10: 00000000  r9 : c7ae981c  r8 : c7b88800
r7 : c7ae5a60  r6 : c7ae5b20  r5 : c7ae9810  r4 : c7afa060
r3 : 00000000  r2 : 00000001  r1 : c7b88800  r0 : c7afa060
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: a7b74000  DAC: 00000015
Process aplay (pid: 701, stack limit = 0xc7b44270)
Stack: (0xc7b45e30 to 0xc7b46000)
5e20:                                     00100000 00000029 c7b88800 c02db870
5e40: c7ae5a60 c02d4594 00000010 01ae5a60 c7ae5a60 c7ae9810 c7ae9810 c7afa060
5e60: c7ae5b20 c7ae5a60 c7b88800 c02e3ef0 c02e3e08 c7b1e400 c7afa060 c7b88800
5e80: 00000000 c0014da8 c7b44000 00000000 bec566ac c02cd400 c7afa060 c7afa060
5ea0: bec56800 c7b88800 c0014da8 c02cdd7c c04ee710 c04ee7b8 00000003 c005fc74
5ec0: 00000000 7fffffff c7b45f00 c7afa060 c7b67420 c7ba3070 00000004 c0014da8
5ee0: c7b44000 00000000 bec566ac c02ced88 c04e95f8 b6f5ab04 c7b45fb0 0145a468
5f00: 0145a600 bec566bc bec56800 c7b67420 c7ba3070 c00d499c c7b45f18 c7b45f18
5f20: 0000001a 00000004 00000001 c7b44000 c0527f40 00000009 00000008 00000000
5f40: c7b44000 c002c9ec 00000001 c04f0ab0 c04ebec0 00000101 00000000 0000000a
5f60: 60000093 c7b67420 bec56800 c25c4111 00000004 c0014da8 c7b44000 00000000
5f80: bec566ac c00d4f38 b6ffb658 00000000 c0522d80 0145a468 b6fd5000 0145a418
5fa0: 00000036 c0014c00 0145a468 b6fd5000 00000004 c25c4111 bec56800 00020001
5fc0: 0145a468 b6fd5000 0145a418 00000036 0145a468 0145a600 bec566bc bec566ac
5fe0: 0145a468 bec56388 b6f65ce4 b6dcebec 20000010 00000004 00000000 00000000
[<c02d3cf8>] (snd_dmaengine_pcm_get_chan+0x8/0x10) from [<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc)
[<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc) from [<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0)
[<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0) from [<c02cd400>] (snd_pcm_hw_params+0x124/0x474)
[<c02cd400>] (snd_pcm_hw_params+0x124/0x474) from [<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74)
[<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74) from [<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510)
[<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510) from [<c00d499c>] (do_vfs_ioctl+0x80/0x5e4)
[<c00d499c>] (do_vfs_ioctl+0x80/0x5e4) from [<c00d4f38>] (sys_ioctl+0x38/0x60)
[<c00d4f38>] (sys_ioctl+0x38/0x60) from [<c0014c00>] (ret_fast_syscall+0x0/0x2c)
Code: e593000c e12fff1e e59030a0 e59330bc (e5930000)
---[ end trace fa518c8ba3a74e97 ]--

Reported-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: stable@vger.kernel.org
2012-07-27 08:49:53 +05:30
Andy Shevchenko dbde5c2934 dw_dmac: use devm_* functions to simplify code
Use devm_kzalloc, devm_clk_get, devm_request_irq, and devm_request_and_ioremap
to reduce the code and to simplify the error path.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-26 11:40:07 +05:30
Linus Torvalds c511dc1fb6 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This time we have a new dmaengine driver from the tegra folks.  Also
  we have Guennadi's cleanup of sh drivers which incudes a library for
  sh drivers.  And the usual odd fixes in bunch of drivers and some nice
  cleanup of dw_dmac from Andy."

Fix up conflicts in drivers/mmc/host/sh_mmcif.c

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Cleanup logging messages
  mmc: sh_mmcif: switch to the new DMA channel allocation and configuration
  dma: sh: provide a migration path for slave drivers to stop using .private
  dma: sh: use an integer slave ID to improve API compatibility
  dmaengine: shdma: prepare to stop using struct dma_chan::private
  sh: remove unused DMA device pointer from SIU platform data
  ASoC: siu: don't use DMA device for channel filtering
  dmaengine: shdma: (cosmetic) simplify a static function
  dmaengine: at_hdmac: add a few const qualifiers
  dw_dmac: use 'u32' for LLI structure members, not dma_addr_t
  dw_dmac: mark dwc_dump_lli inline
  dma: mxs-dma: Export missing symbols from mxs-dma.c
  dma: shdma: convert to the shdma base library
  ASoC: fsi: prepare for conversion to the shdma base library
  usb: renesas_usbhs: prepare for conversion to the shdma base library
  ASoC: siu: prepare for conversion to the shdma base library
  serial: sh-sci: prepare for conversion to the shdma base library
  mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library
  mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion
  dma: shdma: prepare for conversion to the shdma base library
  ...
2012-07-24 17:12:54 -07:00
Joe Perches 6343325023 dmaengine: Cleanup logging messages
Use a more current logging style.

Add pr_fmt to prefix dmaengine: to messages.
Convert printk(KERN_ERR to pr_err(.
Convert embedded function name use to "%s: ", __func__
Align arguments.

Original-patch-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20 11:44:19 +05:30
Guennadi Liakhovetski 1ff8df4f53 dma: sh: provide a migration path for slave drivers to stop using .private
This patch extends the sh dmaengine driver to support the preferred channel
selection and configuration method, instead of using the "private" field
from struct dma_chan. We add a standard filter function to be used by
slave drivers instead of implementing their own ones, and add support for
the DMA_SLAVE_CONFIG control operation, which must accompany the new
channel selection method. We still support the legacy .private channel
allocation method to cater for a smooth driver migration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[applied a trvial checkpath fix]
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20 11:28:20 +05:30
Guennadi Liakhovetski c2cdb7e4d1 dma: sh: use an integer slave ID to improve API compatibility
Initially struct shdma_slave has been introduced with the only member - an
unsigned slave ID - to describe common properties of DMA slaves in an
extensible way. However, experience shows, that a slave ID is indeed the
only parameter, needed to identify DMA slaves. This is also, what is used
by the core dmaengine API in struct dma_slave_config. We switch to using
the slave_id directly, instead of passing a pointer to struct shdma_slave
to improve compatibility with the core. We also make the slave_id signed
for easier error checking.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20 11:23:45 +05:30
Guennadi Liakhovetski ecf90fbbdc dmaengine: shdma: prepare to stop using struct dma_chan::private
Using struct dma_chan::private is deprecated. To update the shdma driver to
stop using it we first have to eliminate internal runtime uses of it. After
that we will also be able to stop using it for channel configuration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20 11:23:44 +05:30
Guennadi Liakhovetski 341f4dc5dc dmaengine: shdma: (cosmetic) simplify a static function
dmae_find_slave() needs only the slave_id field from the slave object, no
need to pass the pointer to the object, pass the slave_id directly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20 11:23:44 +05:30
Uwe Kleine-König 7fd63ccdad dmaengine: at_hdmac: add a few const qualifiers
This prepares of_device_id.data becoming const. Without this change
the following warning would occur:

	drivers/dma/at_hdmac.c: In function 'at_dma_get_driver_data':
	drivers/dma/at_hdmac.c:1228: warning: return discards qualifiers from pointer target type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16 12:05:45 +05:30
Andy Shevchenko f8609c2b52 dw_dmac: use 'u32' for LLI structure members, not dma_addr_t
Use 'u32' for the LLI structure members, which are defined by hardware to be
32-bit. dma_addr_t is much more vague about its actual size.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16 12:03:07 +05:30
Andy Shevchenko 93aad1bcc5 dw_dmac: mark dwc_dump_lli inline
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16 12:03:07 +05:30
Attila Kinali 41c556a8cb dma: mxs-dma: Export missing symbols from mxs-dma.c
mxs-dma.c provides two functions mxs_dma_is_apbh and mxs_dma_is_apbx
which are used at least in mxs-mmc.c. Building mxs-mmc as module
fails due to those two symbols not being exported.

Signed-off-by: Attila Kinali <attila@kinali.ch>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16 11:59:22 +05:30
Guennadi Liakhovetski ce3a1ab742 dma: shdma: convert to the shdma base library
The shdma base library has originally been extracted from the shdma driver,
which now can be converted to actually use it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:13:08 +05:30
Guennadi Liakhovetski 9a7b8e002e dmaengine: add an shdma-base library
This patch extracts code from shdma.c, that does not directly deal with
hardware implementation details and can be re-used with diverse DMA
controller variants, found on SH-based SoCs.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:13:07 +05:30
Guennadi Liakhovetski e95be94b8c dma: move shdma driver to an own directory
The shdma driver is going to be split into multiple files. To make this more
convenient move it to an own directory.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:12:59 +05:30
Laxman Dewangan cd9092c6ea dma: tegra: rename driver and compatible to match with dts
Rename the compatible name and driver name to match with
tegra dts file and as per clock driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 08:49:54 +05:30
Laxman Dewangan 4a46ba36e2 dma: tegra: fix residual calculation for cyclic case
In cyclic mode of DMA, the byte transferred can be more
than the requested size and in this case, calculating
residuals based on the current position of DMA transfer to
bytes requested i.e. bytes required to transfer to reach
bytes requested from current DMA position.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 08:49:54 +05:30
Arnd Bergmann fdc0867884 Merge branch 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/irq
From Shawn Guo <shawn.guo@linaro.org>, this makes it possible to use
sparse irqs with mach-imx.

* 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-02 23:18:19 +02:00
Shawn Guo 88289c80d4 dma: ipu: remove the use of ipu_platform_data
The struct ipu_platform_data is used by platform code to pass
MXC_IPU_IRQ_START to ipu-core driver.  We can save it by having
ipu-core driver call irq_alloc_descs to get the irq_base.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01 21:57:43 +08:00
Russell King d94443256f dmaengine: sa11x0-dma: add cyclic DMA support
Add support for cyclic DMA on sa11x0 platforms.  This follows the
discussed behaviour that the callback will be called at some point
after period expires, and may coalesce multiple period expiries into
one callback (due to the tasklet behaviour.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:26 +01:00
Russell King 63fe23c34e dmaengine: sa11x0-dma: fix DMA residue support
The semantics now implemented are:

- If the cookie has completed successfully, the residue will be zero.
- If the cookie is in progress or the channel is paused, it will be the
  number of bytes yet to be transferred. [*]
- If the cookie is queued, it will be the number of bytes in the
  descriptor.

* - where this is the number of bytes yet to be transferred to/from
  RAM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:25 +01:00
Russell King a068682cd6 dmaengine: PL08x: ensure all descriptors are freed when channel is released
Ensure all queued descriptors are freed when the channel is released,
ensuring we don't leak memory

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:10 +01:00
Russell King 70f3ff434d dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking
The free function says the pl08x lock should be taken before calling
it.  However, the DMA pool allocation/freeing is already properly
locked.  The only thing that would need this is pool_ctr, which
happens to be a write-only variable.

Let's get rid of this, and eliminate any need for additional locking
here.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:08 +01:00
Russell King aa4afb754d dmaengine: PL08x: get rid of pl08x_prep_channel_resources
This function is now unnecessary; we can move its internals inline
instead.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:05 +01:00
Russell King 06e885b735 dmaengine: PL08x: fix tx_status function to return correct residue
Now that we're converted to use the generic vchan support, we can fix
the residue return from tx_status to be compliant with dmaengine.  This
returns the number of bytes remaining for the _specified_ cookie, not
the number of bytes in all pending transfers on the channel.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:02 +01:00
Russell King 18536134ab dmaengine: PL08x: convert to use vchan done list
Convert to use the virtual dma channel done list, tasklet, and
descriptor freeing.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:01 +01:00
Russell King 879f127bb2 dmaengine: PL08x: convert to use vchan submitted/issued lists
Convert to use the virtual dma channel submitted/issued descriptor
lists rather than our own private lists, and use the virtual dma
channel support functions to manage these lists.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:16:00 +01:00
Russell King 083be28a10 dmaengine: PL08x: use vchan's spinlock
Initialize the vchan struct, and use the provided spinlock rather than
our own.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:59 +01:00
Russell King 01d8dc64e9 dmaengine: PL08x: convert to use virt-dma structs
Convert PL08x to use the virt-dma structures.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:59 +01:00
Russell King a5a488db42 dmaengine: PL08x: rejig physical channel allocation
Rework the physical channel allocation mechanism to only allocate
physical channels to virtual channels when they're about to be used.
This eliminates all the complexity with holding channels while
descriptors are being prepared, which is completely unnecessary.

This also brings this driver to a state where the generic virtual DMA
code can be used with this driver, and opens up the possibility of
properly scheduling and prioritorising physical DMA channels to
virtual DMA channels.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:57 +01:00
Russell King c33b644cb3 dmaengine: PL08x: start next descriptor from irq context
Rather than waiting for the tasklet to run, we can start the next
descriptor from interrupt context, as soon as we know that the
previous descriptor has completed.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:56 +01:00
Russell King ea1605612c dmaengine: PL08x: split the pend_list in two
Our behaviour wasn't correct; issue_pending is supposed to be called
before any submitted descriptors are available for processing by the
DMA engine.  Split the pend_list in two, one for submitted descriptors
and another list for issued descriptors.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:55 +01:00
Russell King eab82533c9 dmaengine: PL08x: re-jig the starting of txds
Rather than code the de-queue of the txd several times, move that into
the start_txd function.  Rename this to better illustrate what it's
now doing, and call this function when starting a delayed memcpy().

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:54 +01:00
Russell King 7847f6b55e dmaengine: PL08x: remove waiting descriptor pointer
As we no longer need to pass a descriptor to prep_phy_channel(), we
don't need to keep track of the descriptor which is waiting for a
channel to become available.  So let's get rid of it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:54 +01:00
Russell King c48d496329 dmaengine: PL08x: move DMA signal muxing into slave prepare code
Move the DMA request muxing into the slave prepare code and txd
release/completion code.  This means we only hold the DMA request
mux while there are descriptors waiting to be started or are in
progress.

This leaves txd->direction as a write-only variable; remove it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:53 +01:00
Russell King a936e79313 dmaengine: PL08x: convert to a list of completed descriptors
Convert PL08x to use a list of completed descriptors rather than
merely relying upon a single pointer.  This makes it possible to
schedule the tasklet for other purposes, and makes our behaviour
similar to virt-dma.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:51 +01:00
Russell King 5e2479bd0e dmaengine: PL08x: track mux usage on a per-channel basis.
Keep track of the number of descriptors currently using a MUX setting
on a per-channel basis.  This allows us to know when we have descriptors
queued somewhere which have been assigned a DMA request signal.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:50 +01:00
Russell King ad0de2ac32 dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan struct
Move the signal handling out of the physical channel structure into
the virtual channel structure, where it should belong as it has more
to do with the virtual channel than the physical one.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:50 +01:00
Russell King 6b16c8b161 dmaengine: PL08x: split DMA signal muxing from channel alloc
Split the DMA request mux signal handling from the physical channel
allocation code.  The physical channel has very little to do with the
DMA request input which will be used, so these should be two separate
operations.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:49 +01:00
Russell King dc8d5f8de1 dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config
Get rid of the unnecessary checks in dma_slave_config utilizing
the DMA direction.  This allows us to move the computation of
cctl to the prepare function.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:48 +01:00
Russell King 800d683e6b dmaengine: PL08x: ignore 'direction' argument in dma_slave_config
Ignore the direction argument in dma_slave_config, and configure both
directions independently.  We still check that the configuration for
the intended direction is valid; this check will eventually be dropped.
This check is just for debugging at present.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:47 +01:00
Russell King 9862ba17b7 dmaengine: PL08x: extract function to to generate cctl values
Extract the functionality from dma_slave_config to generate the cctl
values for a given bus width and burst size.  This allows us to use
this elsewhere in the driver, namely the prepare functions.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:46 +01:00
Russell King 409ec8db46 dmaengine: PL08x: move the bus and increment selection to dma prepare function
Move the bus and transfer increment selection to the DMA prepare
function rather than the slave configuration function.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:45 +01:00
Russell King 95442b2234 dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chan
As we now store the dma_slave_config in pl08x_dma_chan, we don't need
to store this separately.  Use the one in dma_slave_config directly.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:43 +01:00
Russell King ed91c13d29 dmaengine: PL08x: get src/dst addr direct from dma_slave_config struct
Add a dma_slave_config struct to struct pl08x_dma_chan, and move the
src_addr/dst_addr arguments into this struct.  This is a step away
from using the dma_slave_config's direction member.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:42 +01:00
Russell King 550ec36f50 dmaengine: PL08x: constify channel names and bus_id strings
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:41 +01:00
Russell King b23f204c8d dmaengine: PL08x: move private data structures into amba-pl08x.c
Move the driver private data structures into the driver itself, rather
than having them exposed to everyone in a header file.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:40 +01:00
Russell King aeea1808fe dmaengine: PL08x: clean up get_signal/put_signal
Try to avoid dereferencing the DMA engine's channel struct in these
platform helpers; instead, pass a pointer to the channel data into
get_signal(), and the returned signal number to put_signal().

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:38 +01:00
Russell King 48afb3112e dmaengine: PL08x: remove circular_buffer boolean from channel data
Circular buffers are not handled in this way; we have a separate API
call now to setup circular buffers.  So lets not mislead people with
this bool.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:37 +01:00
Russell King c15a6ef6ea dmaengine: PL08x: remove redundant spinlock
The pl08x_driver_data spinlock is only ever initialized.  Nothing else
uses it.  Let's get rid of it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:36 +01:00
Russell King 92d2fd619d dmaengine: PL08x: fix missed dma_transfer_direction fixup
db8196df4 (dmaengine: move drivers to dma_transfer_direction) missed
fixing up the "DMA_NONE" case.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:35 +01:00
Russell King b843441a4c dmaengine: PL08x: remove runtime PM support
The runtime PM support conflicts with the generic AMBA bus PM, and also
causes a potential deadlock with the PL011 driver as it results in
interrupts being enabled beneath a spinlock.

I don't presently see any solution to this other than by removing the
runtime PM support entirely from the DMA engine driver.  Alternative
suggestions welcome.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:34 +01:00
Russell King 571fa74034 dmaengine: virt-dma: add support for cyclic DMA periodic callbacks
Add support for cyclic DMA's periodic callbacks.  Drivers are expected
to call vchan_cyclic_callback() when a period has completed, which will
schedule the tasklet to make the callback into the driver.

As callbacks are made from tasklet context, it is important to realise
that we don't guarantee a callback for each completed period, but for
N completed periods where N may be greater than one.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:23 +01:00
Russell King fe045874aa dmaengine: virt-dma: vchan_find_desc()
Add a function to find a descriptor within the depths of the
virtualized DMA channel support.  Needed for tx_status functionality.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:22 +01:00
Russell King 50437bff7f dmaengine: split out virtual channel DMA support from sa11x0 driver
Split the virtual slave channel DMA support from the sa11x0 driver so
this code can be shared with other slave DMA engine drivers.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01 14:15:21 +01:00
Laxman Dewangan 46fb3f8ef5 dma: tegra: set DMA_CYCLIC capability
Tegra's APB DMA driver support the cyclic mode of data
transfer and hence setting the DMA_CYCLIC caps for dma
channels.

This is require when generic sound dmaengine pcm driver
request for dma channel with CYCLIC capability.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-27 19:18:55 +05:30
Laxman Dewangan 6660f7af52 dma: tegra: do not set transfer desc flag to DMA_CTRL_ACK in cyclic mode
The sound dmaengine pcm driver uses the dma in cyclic mode and
it does not ack the transfer descriptor  after transfer stops.
This may lead to hold that desc in chip's dma driver and does
not allow to reuse/free that descriptors. Hence not enabling
flag DMA_CTRL_ACK when dma runs in cyclic mode.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-27 19:18:55 +05:30
Prashant Gaikwad 56482ec0b1 dma: tegra: add clk_prepare/clk_unprepare
Use clk_prepare/clk_unprepare as required by the generic clk framework.

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-27 19:03:25 +05:30
Laxman Dewangan 597c854974 dma: tegra: use sg_dma_address() for getting dma buffer address
Use the sg_dma_address() to get the segment buffer address for
DMA transfer in place of sg_phys() which returns the physical
address of an sg entry.
The sg_dma_address() returns the correct buffer memory address
for DMA transfer.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-27 19:01:52 +05:30
Vinod Koul 49d57b5e58 dmaengine: mmp_tdma: fix the arch dependency
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-23 13:14:17 +05:30
Linus Torvalds 7940b2adb4 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
 "A few fixes in pl330 and imx-sdma drivers."

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  DMA: PL330: Fix racy mutex unlock
  DMA: PL330: Add missing static storage class specifier
  dma: imx-sdma: buf_tail should be initialize in prepare function
  dmaengine: pl330: dont complete descriptor for cyclic dma
2012-06-20 22:12:52 -07:00
Andy Shevchenko 3f9362078b dw_dmac: introduce dwc_chan_disable
This piece of code is used often. Make it as a separate function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:39 +05:30
Andy Shevchenko 0272e93f36 dw_dmac: move from __init to __devinit
We usually have more than one DMA device. Thus, the probe function should serve
for all of them in case when the driver is built as a module.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:38 +05:30
Andy Shevchenko 4c2d56c574 dw_dmac: introduce dwc_fast_fls()
There were three places where such function is used. We still avoid to use
native fls() because in one case it requires to use 64bit version which is
suboptimal in our case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:38 +05:30
Andy Shevchenko 236b106f1a dw_dmac: disable BLOCK interrupts
Just to be sure we are in known state we disable the BLOCK interupts.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:37 +05:30
Andy Shevchenko 11f932ec22 dw_dmac: disable dma in optimal way in probe
The dw_dma_off call needs to have the all_chan_mask calculated. So, done this
calculations before the call. Moreover, remove duplicate code that masks the
DMA interrupts.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:36 +05:30
Andy Shevchenko 2e4c364e15 dw_dmac: use __func__ constant in the debug prints
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:35 +05:30
Andy Shevchenko 2ab3727634 dw_dmac: print correct number of scanned descriptors
In case the first descriptor we found is available, the counter still remains 0
value which is wrong. This patch fixes the counter behaviour.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:34 +05:30
Andy Shevchenko 1d45543765 dw_dmac: introduce dwc_dump_chan_regs to dump registers
There is three places where values of the most significant registers were
printed. Make such piece of code as separate function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:34 +05:30
Andy Shevchenko 2f45d613ff dw_dmac: use proper casting to print dma_addr_t values
dma_addr_t is sometimes 32 bit and sometimes 64. We normally cast them to
unsigned long long for printk().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:33 +05:30
Andy Shevchenko 745664ebe0 dw_dmac: fix constant in the comment
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-21 08:05:32 +05:30
Viresh Kumar 10d8935f46 Viresh has moved
viresh.kumar@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with viresh.linux@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'

Signed-off-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
Zhangfei Gao c6da0ba8df dmaengine: mmp_tdma: add mmp tdma support
Add support for two-channel dma under dmaengine
support: mmp-adma and pxa910-squ

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-20 16:28:41 +05:30
Vinod Koul 0a0760358c Merge branch 'fixes' into next 2012-06-14 11:20:31 +05:30
Linus Walleij f7ceb362c4 dma: coh901318: use devm allocation
Allocate memory, region, remap and irq for device state using
devm_* helpers to simplify memory accounting.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-14 08:42:26 +05:30
Javi Merino fdec53d520 DMA: PL330: Fix racy mutex unlock
pl330_update() stores a pointer to the thrd->req that finished, which
contains a pointer to the corresponding pl330_req.  This is done with
the pl330_lock held.  Then, it iterates through the req_done list,
calling the callback for each of the requests that are done.  The
problem is that the driver releases the lock before calling the
callback for each of the callbacks.  pl330_submit_req() running in
another processor can then acquire the lock and insert another request
in one of the thrd->req that hasn't been processed yet, replacing the
pointer to pl330_req there.  When the callback returns in
pl330_update() and the next rqdone is popped from the list, it
dereferences the pl330_req pointer to the just scheduled pl330_req,
instead of the one that has finished, calling pl330 with the wrong r.

This patch fixes this by storing the pointer to pl330_req directly in
the list.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-14 08:39:52 +05:30
Nicolas Ferre 9102d8715e dmaengine: at_hdmac: trivial: fix comment in header
Not all Atmel SoCs were pointed out in header comment which was bringing
confusion. Remove the truncated list of supported devices, replace by the
only one that is not supported.

Reported-by: Elen Song <elen.song@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-12 14:43:54 +05:30
Laxman Dewangan ec8a158678 dma: tegra: add dmaengine based dma driver
Add dmaengine based NVIDIA's Tegra APB DMA driver.
This driver support the slave mode of data transfer from
peripheral to memory and vice versa.
The driver supports for the cyclic and non-cyclic mode
of data transfer.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-08 10:53:05 +05:30
Huang Shijie f5c55847f7 dma: enable mxs-dma for imx6q
enable the mxs-dma for imx6q.
Also remove the unused header file.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-07 14:55:37 +05:30
Sachin Kamat 5a67ac572e DMA: PL330: Add missing static storage class specifier
Fixes the following sparse warning:
drivers/dma/pl330.c:2542:5: warning: symbol 'add_desc' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-07 13:53:25 +05:30
Richard Zhao 8e2e27c744 dma: imx-sdma: buf_tail should be initialize in prepare function
This fix audio underrun issue. When SNDRV_PCM_TRIGGER_STOP
and SNDRV_PCM_TRIGGER_START, it calls prepare again. buf_tail
should be reset to zero.
So move buf_tail initialization into prepare function.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-07 13:48:42 +05:30
Tushar Behera 30c1dc0ff3 dmaengine: pl330: dont complete descriptor for cyclic dma
Commit eab2158558 ("dmaengine: pl330: dont complete descriptor for
cyclic dma") wrongly completes descriptor for cyclic dma, hence following
BUG_ON is still hit with cyclic DMA operations.

kernel BUG at drivers/dma/dmaengine.h:53!

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
2012-06-07 13:42:58 +05:30
Linus Torvalds 84a442b9a1 arm-soc: device tree conversions, part 2
These continue the device tree work from part 1, this set is for the
 tegra, mxs and imx platforms, all of which have dependencies on clock
 or pinctrl changes submitted earlier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuex7AAoJEIwa5zzehBx3xsQP/jkyt74MvuKUi8pi2zkeMIgn
 4XieyqcA0KZjJzfB22q3GIZjNIf/mEIGE4E/3bneVMPh/E2zaiohaXFExBmjNjml
 hhzWeZlFGPBjrZsfpIXJIIUhwSI7gX2rjYh4npJmdNhZmy8Y89XnpNJhN1kOwMuV
 oN23hPWoSVGbyDMQ0fmHx9GyOL8m7yap+joG13aljDa2OKpQg+pYvdwft+k1K9di
 8yPF+qA043UUR7dSsjmTbiCcjZy2eySdCmfOAkEG4inSgxNoM7GBs3MuwZo/veCD
 v5WssJqWDbLXtqKn5Uo2bvGWiEcf0xtwOAqhSpbaup3dQFJSWMEenBTtA9UlxFhk
 6gdY62O+7k6N0thkxXyLNGkgaGzexZAsK7dM6XSDB+PqD+OSNJS7dvmxZM8tuaRn
 rvCM1XWcNeN/dpnLbgwCR12efkwWtJoqqUZUUp/tFFaTo8HriqeAIYk7obnR8s9n
 S5x9LeueQGNgaxXJzVdh481YKG/1lqjG/a06HbVgYS4XQvtdA+4khalOefJv10tm
 Nkg8+4/8pMthWJfhhlfPUgWFXOXFF2AGPG4su2XwKuFXypO8599lzi7gUQaEZu2U
 7caqoWP69KsKvK5iAAmA4DQ2rcsgHd44NXx/8Jjes9ma8knlYjrf42dBH6AZMQBG
 69I9sJ1cyqusBwx72NPN
 =WeDQ
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree conversions (part 2) from Olof Johansson:
 "These continue the device tree work from part 1, this set is for the
  tegra, mxs and imx platforms, all of which have dependencies on clock
  or pinctrl changes submitted earlier."

Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: dt: tegra: invert status=disable vs status=okay
  ARM: dt: tegra: consistent basic property ordering
  ARM: dt: tegra: sort nodes based on bus order
  ARM: dt: tegra: remove duplicate device_type property
  ARM: dt: tegra: consistenly use lower-case for hex constants
  ARM: dt: tegra: format regs properties consistently
  ARM: dt: tegra: gpio comment cleanup
  ARM: dt: tegra: remove unnecessary unit addresses
  ARM: dt: tegra: whitespace cleanup
  ARM: dt: tegra cardhu: fix typo in SDHCI node name
  ARM: dt: tegra: cardhu: register core regulator tps62361
  ARM: dt: tegra30.dtsi: Add SMMU node
  ARM: dt: tegra20.dtsi: Add GART node
  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra: Add device tree support for AHB
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ...
2012-05-26 12:57:47 -07:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Linus Torvalds ce53044c68 arm-soc: driver specific updates
These changes are specific to some driver that may be used by multiple
 boards or socs. The most significant change in here is the move of the
 samsung iommu code from a platform specific in-kernel interface to the
 generic iommu subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuevXAAoJEIwa5zzehBx3D8YQAKfoY3TFjJ9KmJgk69/pc7cf
 Of0rvX+35NezGFljIyRdspz+DsV+vhJravwdVxOagRKvVBOb9qnZIXnl3gkLnTw4
 dCVMFMqCwXhBeXlXCzHSeRmt2+4/fmJnr7jr4xh9omOAJ9BZv5ftmKNW4zP5wr1L
 +9HBwzkxlVisR4NCz2q66YBjsV2dXA3dv2hZxEFkUdQFYJGqZoUXLYHF9yno20i3
 knKNXEyAFYFUKHiFVBQJ1tYGmZlaIjw14g+GTqzZay2Pi/HjUXfrPd0VwNkBzZf/
 H1N3/cf4GJ2+K/zYqh+H/Xjf/Fjkp1dFNhlUQ7+l5Jwbu7C1B2euvwTO4OaqrfdD
 7eqG3+uIKhPO2Z8ZySLFgx4ghybtwgZrAwOjsa+ymTugqPbiWYB/zZR1iWu5DMk/
 TnNb6P3ciP+WMpoMFh1kXRc/eCCCHtuQ0rLRxizSX6HIpxWvjYFNLH7L3wS+KtlB
 7vsS764d1JFW318bsdBi+V/LWRVXeSWWetTzdzDcM/Syz3ZqfPy7e3Ge6qx0lvYe
 5ojgzKwVqpJenZdt91UC16cMXNqDTzmZObz6LOCmVm1mB5kYSgEHYxAQQvuGFjXT
 28kGyBQNsBboJGaYh2O/CTsVXnHnaPXrtDDWMDacWNwwPYnnA2L8lUNfAg1DgA1j
 Z6CO8Knfct01EpQLtybK
 =hgkg
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...
2012-05-26 12:22:27 -07:00
Linus Torvalds d5adf235ad Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "Nothing exciting this time, odd fixes in a bunch of drivers"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: at_hdmac: take maxburst from slave configuration
  dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant
  dmaengine: at_hdmac: remove some at_dma_slave comments
  dma: imx-sdma: make channel0 operations atomic
  dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful
  dmaengine: Use dma_sg_len(sg) instead of sg->length
  dmaengine: Use sg_dma_address instead of sg_phys
  DMA: PL330: Remove duplicate header file inclusion
  dma: imx-sdma: keep the callbacks invoked in the tasklet
  dmaengine: dw_dma: add Device Tree probing capability
  dmaengine: dw_dmac: Add clk_{un}prepare() support
  dma/amba-pl08x: add support for the Nomadik variant
  dma/amba-pl08x: check for terminal count status only
2012-05-25 09:31:59 -07:00
Linus Torvalds 1be5f0b757 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes fromVinod Koul:
 "fixes of cylic dma usages in slave dma drivers"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: fix cyclic dma usage
  dmaengine: pl330: dont complete descriptor for cyclic dma
2012-05-17 09:57:13 -07:00
Arnd Bergmann 3c0dec5f58 Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into next/clock
* 'clk-next' of git://git.linaro.org/people/mturquette/linux:
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ARM: Orion: SDIO: Add support for clk.
  ARM: Orion: NAND: Add support for clk, if there is one.
  ARM: Orion: EHCI: Add support for enabling clocks
  ARM: Orion: SATA: Add per channel clk/clkdev support.
  ARM: Orion: UART: Get the clock rate via clk_get_rate().
  ARM: Orion: WDT: Add clk/clkdev support
  ARM: Orion: Eth: Add clk/clkdev support.
  ARM: Orion: SPI: Add clk/clkdev support.
  ARM: Orion: Add clocks using the generic clk infrastructure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-16 16:35:25 +02:00
Nicolas Ferre 1dd1ea8eb4 dmaengine: at_hdmac: take maxburst from slave configuration
The maxburst/chunk size was taken from the private slave DMA data structure.
Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst
values.
The ctrla field is not needed anymore in the slave private structure nor the
header constants that were located in an architecture specific directory.
The at91sam9g45_devices.c file that was using this platform data is also
modified to remove this now useless data.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15 08:47:18 +05:30
Nicolas Ferre b409ebfb14 dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant
Not needed constant that was set to 0.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15 08:47:18 +05:30
Vinod Koul 454caf1bef Merge branch 'fixes' into next 2012-05-15 08:44:54 +05:30
Vinod Koul d41160524d dmaengine: fix cyclic dma usage
for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of
cyclic dma which do so

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Mika Westerberg <mika.westerberg@iki.fi>
2012-05-15 08:43:40 +05:30
Arnd Bergmann 304ea74770 Merge branch 'imx/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2
Shawn Guo <shawn.guo@linaro.org> writes:

  I chose to base it on Sascha's imx-common-clk series than -rc, because
  otherwise it will keep patching clock file that has been removed by
  imx-common-clk series.  It also depends on imx-pinctrl pull-request
  I just sent to be functional.

  Note: when imx-common-clk and imx-pinctrl get merged together, the
  following files will have conflicts.  But the conflicts should not be
  so hard to resolve.

[arnd: resolved those merge conflicts by pulling pinctrl branch]

* imx/dt: (24 commits)
  ARM: dts: imx53-qsb: enable audio support
  ARM: dts: imx51-babbage: enable audio support
  ARM: imx: add audio codec clk lookup for imx53-qsb
  ARM: imx: add audmux pad setting for imx51-babbage
  ARM: imx: add more imx5 ssi clocks
  ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
  ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
  ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
  ARM: imx6q: add ssi1_ipg clk_lookup
  ARM: dts: imx6q-sabrelite: add audmux pinctrl support
  ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
  ARM: dts: imx6q-sabrelite: add audmux device
  ARM: dts: imx6q-sabrelite: add ssi device
  ARM: dts: imx6q-arm2: add pinctrl state for usdhc
  ARM: imx6: Add UART2 for low-level debug
  ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled
  ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function
  ARM: dts: imx6q-sabrelite: Add SPI NOR support
  ARM: dts: Add basic support for imx6q-sabresd
  ...

Pulls in imx/pinctrl and imx/clock as dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14 15:28:19 +02:00
Arnd Bergmann 6b204283f2 Merge branch 'imx/pinctrl' into imx/dt
Conflicts:
	drivers/mmc/host/sdhci-esdhc-imx.c
	drivers/net/ethernet/freescale/fec.c
	drivers/spi/spi-imx.c
	drivers/tty/serial/imx.c

This resolves some simply but annoying conflicts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14 15:23:13 +02:00
Olof Johansson 7e6ecebd2c Merge tag 'ep93xx-fixes-for-3.5' of git://github.com/RyanMallon/linux-ep93xx into next/drivers
Branch has one driver feature and one board bug fix. Merging it as a driver branch.

DMA driver change was later:
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>

* tag 'ep93xx-fixes-for-3.5' of git://github.com/RyanMallon/linux-ep93xx:
  dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channels
  arm: ep93xx: Don't try to release not acquired GPIO lines
2012-05-12 00:00:57 -07:00
Dong Aisheng 90c9abc5b7 dma: mxs-dma: add device tree probe support
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12 13:32:18 +08:00
Shawn Guo 8c92013643 dma: mxs-dma: make platform_device_id more generic
Rewrite mxs_dma_is_apbh and mxs_dma_is_apbx in order to support
other SoCs like imx6q and reform the platform_device_id for the
better further dt support.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12 13:32:17 +08:00
Shawn Guo bb11fb63fc dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter
Let macros dma_is_apbh and apbh_is_old take mxs_dma as parameter
to make the code easy to read.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-12 13:32:17 +08:00
Dong Aisheng f5b7efccdb dma: mxs-dma: use global stmp_device functionality
This can get rid of the mach-dependency.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12 13:32:17 +08:00
Arnd Bergmann 93c6d8927f Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/clock
Shawn Guo <shawn.guo@linaro.org> writes:

  mxs common clk porting for v3.5.  It depends on the following two branches.

  [1] git://git.linaro.org/people/mturquette/linux.git clk-next
  [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev

  As the mxs device tree conversion will constantly touch clock files,
  to save the conflicts, the updated mxs/dt branch coming later will
  based on this pull-request.

* 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: remove now unused timer_clk argument from mxs_timer_init
  ARM: mxs: remove old clock support
  ARM: mxs: switch to common clk framework
  ARM: mxs: change the lookup name for fec phy clock
  ARM: mxs: request clock for timer
  clk: mxs: add clock support for imx28
  clk: mxs: add clock support for imx23
  clk: mxs: add mxs specific clocks

Includes an update to Linux 3.4-rc6

Conflicts:
	drivers/clk/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11 17:15:31 +02:00
Richard Zhao 2ccaef0520 dma: imx-sdma: make channel0 operations atomic
device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 14:00:38 +05:30
Lars-Peter Clausen fdaf9c4b22 dmaengine: Use dma_sg_len(sg) instead of sg->length
sg->length may or may not contain the length of the dma region to transfer,
depending on the architecture - dma_sg_len(sg) always will though. For the
architectures which use the drivers modified by this patch it probably is the
case that sg->length contains the dma transfer length. But to be consistent and
future proof change them to use dma_sg_len.

To quote Russel King:
	sg->length is meaningless to something performing DMA.

	In cases where sg_dma_len(sg) and sg->length are the same storage, then
	there's no problem. But scatterlists _can_ (and one some architectures) do
	split them - especially when you have an IOMMU which can allow you to
	combine a scatterlist into fewer entries.

	So, anything using sg->length for the size of a scatterlist's DMA transfer
	_after_ a call to dma_map_sg() is almost certainly buggy.

The patch has been generated using the following coccinelle patch:
<smpl>
@@
struct scatterlist *sg;
expression X;
@@
-sg[X].length
+sg_dma_len(&sg[X])
@@
struct scatterlist *sg;
@@
-sg->length
+sg_dma_len(sg)
</smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 12:04:38 +05:30
Lars-Peter Clausen cbb796ccd8 dmaengine: Use sg_dma_address instead of sg_phys
dmaengine drivers should always use sg_dma_address instead of sg_phys to get the
addresses for the transfer from a sg element.

To quote Russel King:
	sg_phys(sg) of course has nothing to do with DMA addresses. It's the
	physical address _to the CPU_ of the memory associated with the scatterlist
	entry. That may, or may not have the same value for the DMA engine,
	particularly if IOMMUs are involved.

	And if these drivers are used on ARM, they must be fixed, sooner rather
	than later.  There's patches in the works which will mean we will end up
	with IOMMU support in the DMA mapping later, which means everything I've
	said above will become reality.

The patch has been generated using the following coccinelle patch:
<smpl>
@@
struct scatterlist *sg;
@@
-sg_phys(sg)
+sg_dma_address(sg)
</smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 12:04:38 +05:30
Sachin Kamat 12366ad91a DMA: PL330: Remove duplicate header file inclusion
Removes <linux/interrupt.h> file which was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 11:58:15 +05:30
Vinod Koul 0d68ad197b Merge branch 'fixes' into next 2012-05-11 11:54:34 +05:30
Vinod Koul eab2158558 dmaengine: pl330: dont complete descriptor for cyclic dma
the cookie updates completed the cyclic dma descriptor wrongly. This caused the
BUG_ON to be hit as submit is called for completed descriptor

Fix this by not marking the cyclic descriptor as complete

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
2012-05-11 11:24:41 +05:30
Huang Shijie abd9ccc84c dma: imx-sdma: keep the callbacks invoked in the tasklet
The current code keeps the callbacks invoked from interrupt context, this
does not conform to the Documentation/dmaengine.txt.

So add tasklet support to fix this issue.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 11:08:10 +05:30
Viresh Kumar d3f797d93e dmaengine: dw_dma: add Device Tree probing capability
SPEAr platforms now support DT and so must convert all drivers to support DT.
This patch adds DT probing support for Synopsys DMA controller and updates its
documentation too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 10:43:40 +05:30
Viresh Kumar 3075528d3d dmaengine: dw_dmac: Add clk_{un}prepare() support
clk_{un}prepare is mandatory for platforms using common clock framework. Since
this driver is used by SPEAr platform, which supports common clock framework,
add clk_{un}prepare() support for it.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 10:43:39 +05:30
Andrew Lunn c510182b1c ARM: Orion: XOR: Add support for clk
Some orion platforms can gate the XOR driver clock. If the clock
exisits, unable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:02 -07:00
Linus Torvalds acdf2fc860 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul.

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine/amba-pl08x : reset phychan_hold on terminate all
  dma: pl330: fix a couple of compilation warnings
  dma/ste_dma40: fix erroneous comparison
  dma/ste_dma40: explicitly include regulator consumer header
  dma40: Improve the logic of stopping logical chan
  dmaengine: at_hdmac: remove clear-on-read in atc_dostart()
  dma: mxs-dma: enable channel in device_issue_pending call
  dmaengine: imx-dma: dont complete descriptor for cyclic dma
2012-04-26 15:33:36 -07:00
Sascha Hauer 4fa030a43d dmaengine i.MX ipu: clk_prepare/unprepare clock
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25 17:03:43 +02:00
Sascha Hauer 7560e3f358 dmaengine i.MX SDMA: do not depend on grouped clocks
the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25 17:03:35 +02:00
Vinod Koul 56cbb3dd48 Merge branch 'fixes' into next 2012-04-25 15:28:54 +05:30
Linus Walleij affa115ed3 dma/amba-pl08x: add support for the Nomadik variant
The Nomadik PL080 variant has some extra protection bits that
may be set, so we need to check these bits to see if the
channels are actually available for the DMAengine to use.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Cc: Alessandro Rubini <rubini@gnudd.com>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25 15:21:47 +05:30
Davide Ciminaghi 88c08a3fba dmaengine/amba-pl08x : reset phychan_hold on terminate all
When a client calls pl08x_control with DMA_TERMINATE_ALL, it is correct
to terminate and release the phy channel currently in use (if one is in use),
but the phychan_hold counter must also be reset (otherwise it could get
trapped in an unbalanced state).

Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25 15:10:57 +05:30
Olof Johansson c847382838 dma: pl330: fix a couple of compilation warnings
Move a couple of tests and do a minor refactor to avoid:

drivers/dma/pl330.c: In function 'pl330_probe':
drivers/dma/pl330.c:2929:215: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/dma/pl330.c: In function 'pl330_tasklet':
drivers/dma/pl330.c:2250:8: warning: 'pch' may be used uninitialized in this function [-Wuninitialized]
drivers/dma/pl330.c:2228:25: note: 'pch' was declared here
drivers/dma/pl330.c:2277:130: warning: 'pch' may be used uninitialized in this function [-Wuninitialized]
drivers/dma/pl330.c:2260:25: note: 'pch' was declared here

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25 15:05:25 +05:30
Linus Walleij d29bf01941 dma/amba-pl08x: check for terminal count status only
For some reason I can't figure out we're reading the PL080_INT_STATUS
register instead of PL080_TC_STATUS when checking for the terminal
count. The PL080_INT_STATUS is a logical OR between the error and
terminal count status register and may not report what we want it
to, especially if there is an error and a terminal count at the same
time and the former is not lowered in time for the check in the TC
register. Make sure we read what we're actually interested in.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:23:55 +05:30
Linus Walleij 7e426da823 dma/ste_dma40: fix erroneous comparison
A small fallout from Vinod's conversions to dma_transfer_direction,
this small comparison was done with a dma_data_direction instead.
Fix it by comparing against the correct enum.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:07:05 +05:30
Linus Walleij 15e4b78d73 dma/ste_dma40: explicitly include regulator consumer header
The patch "ARM: amba: Remove AMBA level regulator support" breaks
the DMA40 driver since the <linux/amba/bus.h> header implicitly
included the regulator consumer header. So include it explicitly
and fix the build error.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:07:05 +05:30
Narayanan G 1bdae6f49c dma40: Improve the logic of stopping logical chan
can be directly stopped by issuing a SUSPEND_REQ on the EE
bits. There is no need to suspend the physical channel and
restart it.

Also, the support for pre-V2 hw is discontinued.

EE bits for writing:

00: disable only if AS=11 or AS=00
01: enable
10: suspend_req only if AS=01 & EE=01 or EE=11
11: round / no change for writing

Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 17:56:17 +05:30
Nicolas Ferre ed8b0d67f3 dmaengine: at_hdmac: remove clear-on-read in atc_dostart()
This loop on EBCISR register was designed to clear IRQ sources before enabling
a DMA channel. This register is clear-on-read so a race condition can appear if
another channel is already active and has just finished its transfer.
Removing this read on EBCISR is fixing the issue as there is no case where an IRQ
could be pending: we already make sure that this register is drained at probe()
time and during resume.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20 15:38:05 +05:30
Shawn Guo d04525ed03 dma: mxs-dma: enable channel in device_issue_pending call
Enable channel in device_issue_pending call, so that the order between
cookie assignment and channel enabling can be ensured naturally.

It fixes the mxs gpmi-nand breakage which is caused by the incorrect
order of cookie assigning and channel enabling.

Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Huang Shijie <b32955@freescale.com>
Tested-by <samgandhi9@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20 15:35:58 +05:30
Vinod Koul 60f2951e3a dmaengine: imx-dma: dont complete descriptor for cyclic dma
the cookie updates completed the cyclic dma descriptor wrongly. This caused the
BUG_ON to be hit as submit is called for completed descriptor

Fix this by not marking the cyclic descriptor as complete

Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20 15:28:07 +05:30
Rafal Prylowski 2b3c83efc9 dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channels
Add double buffering support for M2M DMA channels. Implement this by using EP93xx
M2M DMA Buffer and Control Finite State Machines to be sure that we are not
disabling the channel when it's actually operating.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-20 08:37:19 +10:00
Nicolas Ferre f898fed0c2 dmaengine: Kconfig: fix Atmel at_hdmac entry
Remove SoC dependency and make it generic for every Atmel ARM AT91. That will
allow to select this driver for newer chips. Keep dependency on AT91 because of
the use of an header file located in include/mach directory.
Modify the comment to reflect this.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-17 16:29:41 +02:00
Linus Torvalds 94fb175c04 dmaengine-fixes for 3.4-rc3
1/ regression fix for Xen as it now trips over a broken assumption
    about the dma address size on 32-bit builds
 
 2/ new quirk for netdma to ignore dma channels that cannot meet
    netdma alignment requirements
 
 3/ fixes for two long standing issues in ioatdma (ring size overflow)
    and iop-adma (potential stack corruption)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPhIfhAAoJEB7SkWpmfYgCguIQAL4qF+RC9/JggSHIjfOrYiPd
 yboV80GqqQHHBwy8hfZVUrIEPMebvD/xUIk6iUQNXR+6EA8Ln0jukvQMpWNnI+Cc
 TXgA5Ok70an4PD1MqnCsWyCJjsyPyhprbRHurxBcesf+y96POJxhING0rcKvft50
 mvYnbtrkYe9M9x3b8TBGc0JaTVeL29Ck3FtkTz4uUktbkhRNfCcfEd28NRQpf8MB
 vkjbjRGBQmGsnKxYCaEhlF1GPJyTlYjg4BBWtseJgb2R9s7tvJrkotFea/NmSfjq
 XCuVKjpiFp3YyJuxJERWdwqRWvyAZFfcYyZX440nG0b7GBgSn+T7A9XhUs8vMboi
 tLwoDfBbJDlKMaFpHex7Z6RtZZmVl3gWDNZTqpG44n4pabd4RPip04f0k7Wfs+cp
 tzU9hGAOvgsZ8w4/JgxH8YJOZbIGzbDGOA1IhWcbxIbmFTblMiFnV3TC7qfhoRbR
 8qtScIE7bUck2MYVlMMn9utd9tvKFa6HNgo41+f78/4+U7zQ/VrsbA/DWQct40R5
 5k+EEvyYFUzIXn79E0GVN5h4NHH5gfAs3MZ7jIgwgHedBp4Ki68XYKNu+pIV3YwG
 CFTPn1mVOXnCdt+fsjG5tL9Jecx1Mij6w3nWU93ZU6cHmC77YmU+DLxPIGuyR1a2
 EmpObwfq5peXzkgQpEsB
 =F3IR
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine fixes from Dan Williams:

1/ regression fix for Xen as it now trips over a broken assumption
   about the dma address size on 32-bit builds

2/ new quirk for netdma to ignore dma channels that cannot meet
   netdma alignment requirements

3/ fixes for two long standing issues in ioatdma (ring size overflow)
   and iop-adma (potential stack corruption)

* tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  netdma: adding alignment check for NETDMA ops
  ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata
  ioat: ring size variables need to be 32bit to avoid overflow
  iop-adma: Corrected array overflow in RAID6 Xscale(R) test.
  ioat: fix size of 'completion' for Xen
2012-04-10 15:30:16 -07:00
Linus Torvalds 5d32c88f0b Merge branch 'akpm' (Andrew's patch-bomb)
Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA
2012-04-05 15:30:34 -07:00
Dave Jiang a2bd1140a2 netdma: adding alignment check for NETDMA ops
This is the fallout from adding memcpy alignment workaround for certain
IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align
ops.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-05 15:27:12 -07:00
Stephen Boyd 234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
Dave Jiang f26df1a1a9 ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata
Silicon errata where when RAID and legacy descriptors are mixed, the legacy
(memcpy and friends) operation must have alignment of 64 bytes to avoid
hanging. This effects Intel Xeon C55xx, C35xx, E5-2600.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-05 15:24:35 -07:00
Dave Jiang 21b764e075 ioat: ring size variables need to be 32bit to avoid overflow
The alloc order can be up to 16 and 1 << 16 will over flow the 16bit
integer. Change the appropriate variables to 16bit to avoid overflow.

Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-05 15:22:58 -07:00
Linus Torvalds 20a2a81160 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Nothing too big here, just small fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: fix more fallout from 9f97da78bf (Disintegrate asm/system.h for ARM)
  ARM: fix bios32.c build warning
  ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms
  ARM: fix missing bug.h include in arch/arm/kernel/insn.c
  ARM: sa11x0: fix build errors from DMA engine API updates
2012-04-04 08:25:23 -07:00
Linus Torvalds 623ff7739e MTD merge for 3.4
Artem's cleanup of the MTD API continues apace.
 Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst others.
 More work on DiskOnChip G3, new driver for DiskOnChip G4.
 Clean up debug/warning printks in JFFS2 to use pr_<level>.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAk92K6UACgkQdwG7hYl686NrMACfWQJRWasR78MWKfkT2vWZwTFJ
 X5AAoKiSYO2pfo5gWJGOAahNC1zUqMX0
 =i3Vb
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_<level>.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...
2012-03-30 17:31:56 -07:00
Russell King d9d5454014 ARM: sa11x0: fix build errors from DMA engine API updates
The recent merge of the sa11x0 code into mainline had silent conflicts
with further development of the DMA engine API, leading to build errors
and warnings:

drivers/net/irda/sa1100_ir.c: In function 'sa1100_irda_dma_start':
drivers/net/irda/sa1100_ir.c:151: error: too few arguments to function 'chan->device->device_prep_slave_sg'
drivers/dma/sa11x0-dma.c: In function 'sa11x0_dma_probe':
drivers/dma/sa11x0-dma.c:950: warning: assignment from incompatible pointer type

Fix these.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-30 11:46:20 +01:00
Linus Torvalds ef08e78268 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...
2012-03-29 15:34:57 -07:00
Don Morris 3d9ea9e3af iop-adma: Corrected array overflow in RAID6 Xscale(R) test.
Bug: cppcheck reported overflow in array assignment (for loop walks
0 to IOP_ADMA_NUM_SRC_TEST+2, array size is IOP_ADMA_NUM_SRC_TEST).

Reported as: https://bugzilla.kernel.org/show_bug.cgi?id=42677

Test code pq_src array was grown by two elements to correspond with actual
usage (IOP_ADMA_NUM_SRC_TEST+2), stack consumption was kept constant by
modifying the pq_dest two element array which is only used when pq_src
is referenced up to IOP_ADMA_NUM_SRC_TEST elements into the address
of the new last two elements of the pq_src array. This is presumed to
be the original intent but would be reliant on compilers always having
pq_dest contiguous with the final element of pq_src.

Note: This is a re-send of a request for review from two weeks ago.
Looking for review (or shootdown), adding LKML to list for a wider
audience. Thanks.

Updated per review comments of Sergei Shtylyov <sshtylyov@mvista.com>

Signed-off-by: Don Morris <don.morris@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-03-28 01:47:49 -07:00
Linus Torvalds 9e4db1c3ee Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...
2012-03-27 18:17:02 -07:00
Vinod Koul 5b2e02e401 dmaengine: imx: fix the build failure on x86_64
commit 6bd081277e "dmaengine: imx-dma: merge old dma-v1.c with
imx-dma.c" removed the dependency in config for the imx dma driver,
whereas it should depend on ARCH_MXS

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-27 21:46:21 +05:30
Huang Shijie 921de864b7 mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()
[1] Background :
    The GPMI does ECC read page operation with a DMA chain consist of three DMA
    Command Structures. The middle one of the chain is used to enable the BCH,
    and read out the NAND page.

    The WAIT4END(wait for command end) is a comunication signal between
    the GPMI and MXS-DMA.

[2] The current DMA code sets the WAIT4END bit at the last one, such as:

    +-----+               +-----+                      +-----+
    | cmd | ------------> | cmd | ------------------>  | cmd |
    +-----+               +-----+                      +-----+
                                                          ^
                                                          |
                                                          |
                                                     set WAIT4END here

    This chain works fine in the mx23/mx28.

[3] But in the new GPMI version (used in MX50/MX60), the WAIT4END bit should
    be set not only at the last DMA Command Structure,
    but also at the middle one, such as:

    +-----+               +-----+                      +-----+
    | cmd | ------------> | cmd | ------------------>  | cmd |
    +-----+               +-----+                      +-----+
                             ^                            ^
                             |                            |
                             |                            |
                        set WAIT4END here too        set WAIT4END here

    If we do not set WAIT4END, the BCH maybe stalls in "ECC reading page" state.
    In the next ECC write page operation, a DMA-timeout occurs.
    This has been catched in the MX6Q board.

[4] In order to fix the bug, rewrite the last parameter of mxs_dma_prep_slave_sg(),
    and use the dma_ctrl_flags:
    ---------------------------------------------------------
      DMA_PREP_INTERRUPT : append a new DMA Command Structrue.
      DMA_CTRL_ACK       : set the WAIT4END bit for this DMA Command Structure.
    ---------------------------------------------------------

[5] changes to the relative drivers:
    <1> For mxs-mmc driver, just use the new flags, do not change any logic.
    <2> For gpmi-nand driver, and use the new flags to set the DMA
        chain, especially for ecc read page.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:37:28 +01:00
Huang Shijie 3946860409 mxs-dma : move the mxs dma.h to a more common place
Move the header to a more common place.
The mxs dma engine is not only used in mx23/mx28, but also used
in mx50/mx6q.  It will also be used in the future chips.

Rename it to mxs-dma.h, and create a new folder include/linux/fsl/ to
store the Freescale's header files.

change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver
to the new header file.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:37:23 +01:00
Javier Martin 660cd0dd94 dmaengine: i.MX: Fix merge of cookie branch.
When merging DMA cookie changes a small chunk
of code was dropped. This broke imx-dma driver.

This patch adds this chunk again and fixes the problem.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:32 +05:30
Javier Martin f606ab897b dmaengine: i.MX: Add support for interleaved transfers.
i.MX2 and i.MX1 chips have the possibility to do
interleaved transfers with two constraints:
- Only one chunk can be used (i.e. only 2D transfers are allowed).
- Only 2 interleaved configurations can be applied at the same time
for all channels.

Since this patch adds a new resource 'slots_2d' which is shared
by all the DMA channels and to avoid disgustin locking BUGs, the
'lock' member has been moved to the global 'imxdma_engine' structure.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:32 +05:30
Javier Martin f9b283a6e4 dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
There were some 'pr_crit' and 'pr_debug' messages due to the
initial merge. Replace them by 'dev_dbg' and 'dev_warn' to be
consistent.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:32 +05:30
Javier Martin cd5cf9da02 dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
These global variables are integrated into the dmaengine structure.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:32 +05:30
Javier Martin a6cbb2d87d dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
Since this function is always used with 'desc' as first argument
and 'desc->sg' as second argument, the latter is clearly redundant
and can be removed.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:32 +05:30
Javier Martin 2d9c2fc59a dmaengine: imx-dma: remove internal structure.
This structure was created to allow an smoothless
merge but was meant to be removed. Remaining members
'hw_chaining' and 'watchdog' are moved to the channel
structure.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:31 +05:30
Javier Martin 6b0e2f55e3 dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
Use per-descriptor 'len' field to keep track of the remaining bytes
instead. This goes on the direction of eventually removing the
'internal' structure.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:31 +05:30
Javier Martin e4756b5e06 dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
It makes no sense keeping an 'in_use' flag when the multiple descriptor
mechanism already prevents a new DMA transfer to be issued when another
one is in course.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:31 +05:30
Javier Martin 833bc03bf1 dmaengine: imx-dma: remove sg member from internal structure.
This member is redundant, because it is already present in
descriptor structure. Removing it will make further removing
of 'internal' structure easier.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:31 +05:30
Javier Martin 359291a1a0 dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
Removing this function allows moving 'ccr_to_device' and
'ccr_from_device' from internal struct to channel struct.
This repesents a step forward towards removing auxiliary
'internal' structure.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:31 +05:30
Javier Martin bdc0c7534c dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
This function is only used once in the driver and uses some
intermediary variables that are not needed anymore. For this
reason it's been merged with 'imxdma_control'.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:30 +05:30
Javier Martin 3b4b6dfc20 dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
This function is only used once in the driver and has a lot of checks
that are not needed anymore. For this reason it's been merged
with 'imxdma_enable_hw'.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:30 +05:30
Javier Martin 2efc3449d7 dmaengine: imx-dma: remove dma_mode member of internal structure.
dmaengine now provides 'enum dma_transfer_direction' to properly
specify DMA transfer direction. For this reason, DMA_MODE_* defines
are replaced by this new type and therefore dma_mode member becomes
redundant.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:30 +05:30
Javier Martin 232e3c2c79 dmaengine: imx-dma: remove data member from internal structure.
Internal structure is just an auxiliary structure used for the initial
merge which is meant to be gone. As data member is not use anywhere
we can simply remove it.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:30 +05:30
Javier Martin 6bd081277e dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
It is mainly a simple merge changing the prefix of some
functions to fit the imx-dma namings.

As there are no users of the old dma-v1.c api we can safely
remove this file.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-26 11:31:29 +05:30
Linus Torvalds 11bcb32848 The following text was taken from the original review request:
"[PATCH 0/3] RFC - module.h usage cleanups in fs/ and lib/"
 		https://lkml.org/lkml/2012/2/29/589
 --
 
 Fix up files in fs/ and lib/ dirs to only use module.h if they really
 need it.
 
 These are trivial in scope vs. the work done previously.  We now have
 things where any few remaining cleanups can be farmed out to arch or
 subsystem maintainers, and I have done so when possible.  What is
 remaining here represents the bits that don't clearly lie within a
 single arch/subsystem boundary, like the fs dir and the lib dir.
 
 Some duplicate includes arising from overlapping fixes from
 independent subsystem maintainer submissions are also quashed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNw3AAoJEOvOhAQsB9HWA7wQALrsQ6V6Z+B3KsvSoD5kFnpZ
 Y+4uggs+GdUdWmtRrZnTBp896gGuUgBxc3syA2XWd7Oqi49+c5c1m0cFxKyVdIHm
 fB+jmxS69soADtHR3cXmxcQshrUzUf2rTn8frcw4O/BmJuplv4xT9uPQzwGaRSZT
 gomQsQ1bGnkwjO2jfS8f/N5Mjr8u/z0WF7TTOTUSq+Cv3BervPaSPF1Ea6J8oo+N
 4+/n8RlU1HWiI4inrgrFPN6UHmE45BAL2xGbB47LgooHJW8P5kAnU+vxGScaoy1Q
 JKX9WKT3VCiwR3VOPa86iLKP3Y8a3VlhyGn+yzzcYkGX/n0tbT7aoRhQm21sGIv0
 DoeXWe7aiiY8cEW69G6GIfRPFl+Zh81m1Whbu7IZT/sV3asx6jWmEXE8CgCfeDt5
 mNQk9D4Irf6+rmCSbeSVC4L0eFfLxNFouNyh2aus/q+gIjKNKYwZQryHrodK4wpv
 UgMKSTZfPrTAWay2gCNWNqo3Zs8e1LDqkftetxeU3jx2kTuaNzBl4Y7mhsX7sLYe
 MsFX3JUJ2pn6XWbgqcY+bdr/mzgsCrjzqdf15MTUzEc5SIfVF+XpNNZN1ITwl6UA
 /ZH9keBu1mEdCoPU5W74kYwx4p35hIeWJGfc0MRp07ruf941F+SBgMD11B0+06f0
 pN0DcITTkD16+sS4x1cB
 =Z4w0
 -----END PGP SIGNATURE-----

Merge tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
 "Fix up files in fs/ and lib/ dirs to only use module.h if they really
  need it.

  These are trivial in scope vs the work done previously.  We now have
  things where any few remaining cleanups can be farmed out to arch or
  subsystem maintainers, and I have done so when possible.  What is
  remaining here represents the bits that don't clearly lie within a
  single arch/subsystem boundary, like the fs dir and the lib dir.

  Some duplicate includes arising from overlapping fixes from
  independent subsystem maintainer submissions are also quashed."

Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).

* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  lib: reduce the use of module.h wherever possible
  fs: reduce the use of module.h wherever possible
  includecheck: delete any duplicate instances of module.h
2012-03-24 10:24:31 -07:00
Linus Torvalds 0d19eac120 Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-arm
Pull #2 ARM updates from Russell King:
 "Further ARM AMBA primecell updates which aren't included directly in
  the previous commit.  I wanted to keep these separate as they're
  touching stuff outside arch/arm/."

* 'amba' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver
  ARM: 7335/1: mach-u300: do away with MMC config files
  ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register
  ARM: 7309/1: realview: fix unconnected interrupts on EB11MP
  ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets
  ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job
  ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend
  ARM: 7221/1: mmc: mmci: Change from using legacy suspend
  ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler
  ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction
  ARM: 7217/1: mmc: mmci: Put power register deviations in variant data
  ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end
  ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
2012-03-23 17:36:29 -07:00
Dan Williams 2750293539 ioat: fix size of 'completion' for Xen
Starting with v3.2 Jonathan reports that Xen crashes loading the ioatdma
driver.  A debug run shows:

  ioatdma 0000:00:16.4: desc[0]: (0x300cc7000->0x300cc7040) cookie: 0 flags: 0x2 ctl: 0x29 (op: 0 int_en: 1 compl: 1)
  ...
  ioatdma 0000:00:16.4: ioat_get_current_completion: phys_complete: 0xcc7000

...which shows that in this environment GFP_KERNEL memory may be backed
by a 64-bit dma address.  This breaks the driver's assumption that an
unsigned long should be able to contain the physical address for
descriptor memory.  Switch to dma_addr_t which beyond being the right
size, is the true type for the data i.e. an io-virtual address
inidicating the engine's last processed descriptor.

[stable: 3.2+]
Cc: <stable@vger.kernel.org>
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: William Dauchy <wdauchy@gmail.com>
Tested-by: William Dauchy <wdauchy@gmail.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-03-23 13:36:42 -07:00
Nicolas Ferre beeaa103ee dmaengine: at_hdmac: add slave config operation
This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver.

It is needed to fix a regression in the use of atmel-mci.c driver on Atmel
AT91 platforms brouth by e2b35f3:
"dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes"

We remove some parts of the private structure "at_dma_slave" and use the
information provided by "struct dma_slave_config": source/destination
peripheral registers and access width.

AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we
now use the standard ones. Although some conversion functions are needed to
match register expected values.

Some AT91 sub-architecture specific files are slightly touched by this patch
but it cannot be split because it can break compilation.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21 21:12:29 +05:30
Alexandre Bounine 185ecb5f4f dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic()
interfaces to allow passing client/target specific information associated
with the data transfer.
Modify all affected DMA engine drivers.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21 19:20:23 +05:30
Fabio Estevam ad1122e545 dma: imx-sdma: Treat firmware messages as warnings instead of erros
As the SDMA controller can operate without an external firmware being loaded,
treat the firmware related messages as warnings rather than errors.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21 15:38:51 +05:30
Linus Torvalds 69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
viresh kumar 9e5ed094c8 ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver
For simple modules that contain a single amba_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_amba_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-16 23:32:35 +00:00
Vinod Koul 1f3d6dc0be Merge branch 'rmk_cookie_fixes2' into next
Conflicts:
	drivers/dma/imx-dma.c
	drivers/dma/pl330.c

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 12:39:49 +05:30
Vinod Koul 949ff5b8d4 dmaengine: fix for cookie changes and merge
Fixed trivial issues in drivers:
	drivers/dma/imx-sdma.c
	drivers/dma/intel_mid_dma.c
	drivers/dma/ioat/dma_v3.c
	drivers/dma/iop-adma.c
	drivers/dma/sirf-dma.c
	drivers/dma/timb_dma.c

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:58:12 +05:30
Vinod Koul 8867bd508f dmaengine: pl330: fix the pl330 build after cookie cleanup
drivers/dma/pl330.c: In function 'pl330_control':
drivers/dma/pl330.c:342: error: 'struct dma_pl330_chan' has no member named
'completed'

Reported by: Jassi Brar <jassisinghbrar@gmail.com>
Suggested by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:56:44 +05:30
Russell King - ARM Linux 8ac695463f dmaengine: ensure all DMA engine drivers initialize their cookies
Ensure all DMA engine drivers initialize their cookies in the same way,
so that they all behave in a similar fashion.  This means their first
issued cookie will be 2 rather than 1, and will increment to INT_MAX
before returning 1 and starting over.

In connection with this, Dan Williams said:
> Russell King wrote:
> > Secondly, some DMA engine drivers initialize the dma_chan cookie to 0,
> > others to 1.  Is there a reason for this, or are these all buggy?
>
> I know that ioat and iop-adma expect 0 to mean "I have cleaned up this
> descriptor and it is idle", and would break if zero was an in-flight
> cookie value.  The reserved usage of zero is an driver internal
> concern, but I have no problem formalizing it as a reserved value.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:37:42 +05:30
Russell King - ARM Linux 2a926e4602 dmaengine: fix cookie handling in iop-adma.c and ppc4xx/adma.c
Dan Williams said:
> > Russell King wrote:
> > Firstly, we have DMA_MIN_COOKIE which has value 1 - so any cookies below
> > that aren't valid.  That seems sane.
> >
> > We seem to have different behaviours:
> >
> > -       cookie = c->cookie;
> > -       cookie++;
> > -       if (cookie < 0)
> > -               cookie = 1;
> > -       c->cookie = cookie;
> > -       tx->cookie = cookie;
> >
> > c->cookie here is initialized to zero, so the first cookie given out will
> > be 1.  This is how most DMA engine drivers implement this.
> >
> > Then we have this:
> >
> >                cookie = chan->common.cookie;
> >                cookie++;
> >                if (cookie <= 1)
> >                        cookie = 2;
> >
> >                /* initialize the completed cookie to be less than
> >                 * the most recently used cookie
> >                 */
> >                chan->common.completed_cookie = cookie - 1;
> >                chan->common.cookie = sw_desc->async_tx.cookie = cookie;
> >
> > Again, chan->common.cookie starts off at 0.  The first cookie given out
> > will be 2, and 1 will never be used.  There are three drivers which
> > implement it this way.
> >
> > Why is there this difference, and can these three be corrected to behave
> > the same way as the first (and therefore the assignment of cookies
> > consolidated?)
>
> Yes, they should be consolidated, and I believe they have drifted only
> because there were no good common helpers and murphy's law took over.

So lets fix this up to use the common dma_cookie_assign() helper.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:37:33 +05:30
Russell King - ARM Linux d3ee98cdcd dmaengine: consolidate initialization of cookies
Provide a common function to initialize a channels cookie values.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:37:22 +05:30
Russell King - ARM Linux 96a2af41c7 dmaengine: consolidate tx_status functions
Now that we have the completed cookie in the dma_chan structure, we
can consolidate the tx_status functions by providing a function to set
the txstate structure and returning the DMA status.  We also provide
a separate helper to set the residue for cookies which are still in
progress.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:37:14 +05:30
Russell King - ARM Linux f7fbce07c6 dmaengine: provide a common function for completing a dma descriptor
Provide a common function to do the cookie mechanics for completing
a DMA descriptor.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:37:01 +05:30
Russell King - ARM Linux 884485e1f1 dmaengine: consolidate assignment of DMA cookies
Everyone deals with assigning DMA cookies in the same way (it's part of
the API so they should be), so lets consolidate the common code into a
helper function to avoid this duplication.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:36:52 +05:30
Russell King - ARM Linux d2ebfb335b dmaengine: add private header file
Add a local private header file to contain definitions and declarations
which should only be used by DMA engine drivers.

We also fix linux/dmaengine.h to use LINUX_DMAENGINE_H to guard against
multiple inclusion.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:36:44 +05:30
Russell King - ARM Linux 4d4e58de32 dmaengine: move last completed cookie into generic dma_chan structure
Every DMA engine implementation declares a last completed dma cookie
in their private dma channel structures.  This is pointless, and
forces driver specific code.  Move this out into the common dma_chan
structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:36:06 +05:30
Russell King - ARM Linux 08714f60b0 dmaengine: mv_xor: remove write-only is_complete_cookie
mv_xor's is_complete_cookie is only ever written to, but never read.
This is silly, remove the write-only structure member.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:35:40 +05:30
Vinod Koul 5170c051a5 Revert "drivers/dma: linux/module.h included twice"
This reverts commit 865d9438eb.

The module.h incsuion twice has been updated tree wide hence this is not
required to be merged.

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-09 14:55:25 +05:30
Boojin Kim 3ecf51a45c DMA: PL330: Support MEMTOMEM transmit w/o RMB, WMB
The DMAC PL330 r1p0 version fixed the lockup error being on r0p0.
This patch supports the DMA transmission without memory barrier
operation when the revision of DMAC PL330 is the next of r0p0.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-08 17:59:29 +05:30
Boojin Kim b06db6e56c DMA: PL330: Removes useless function
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-08 17:59:29 +05:30
Boojin Kim b7d861d939 DMA: PL330: Merge PL330 driver into drivers/dma/
Currently there were two part of DMAC PL330 driver for
support old styled s3c-pl330 which has been merged into
drivers/dma/pl330.c driver. Actually, there is no reason
to separate them now.

Basically this patch merges arch/arm/common/pl330.c into
drivers/dma/pl330.c driver and removes useless exported
symbol, externed function and so on.

The newer pl330 driver tested on SMDKV310 and SMDK4212 boards

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-08 17:59:28 +05:30
Russell King 6365bead25 DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.

We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done.  This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.

Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels.  As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07 11:32:21 +00:00
Fabio Estevam 6d0d7e2d55 dma: imx-sdma: Print a message when firmare fails to be requested
Print a message when firmare fails to be requested in the case of platform data being used.

While at it, distinguish between the error messages of the device tree and platform data cases.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 17:34:05 +05:30
Fabio Estevam 6602b0ddf3 dma: imx-sdma: Let the driver be probed even if no firware is found
On the device tree case the code bails out when the firmware name cannot be found
or if the firmware fails to be requested.

Fix this behaviour as the SDMA engine can still operate with the built-in
ROM scripts.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 17:34:05 +05:30
Javier Martin 9e15db7ce9 dmaengine: Add support for multiple descriptors for imx-dma.
dmaengine specifies the possibility that several descriptors
can be queued for transfer. It also indicates that tasklets
must be used for DMA callbacks.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 17:19:21 +05:30
Javier Martin 6c05f09155 dmaengine: Add support for MEMCPY for imx-dma.
MEMCPY transfers allow DMA copies from memory to
memory. This patch has been tested with dmatest
device driver.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 17:19:21 +05:30
Fabio Estevam d8b53489d4 dma: dmaengine: Distinguish between 'dmaengine: failed to get' messages
The message "dmaengine: failed to get" can come from two possible locations within dmaengine.c.

In order to distinguish between them, replace "dmaengine" with __func__ string so that the
source function of the error message can be easily identified.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 17:01:07 +05:30
Danny Kukawka 865d9438eb drivers/dma: linux/module.h included twice
drivers/dma/imx-dma.c and drivers/dma/imx-sdma.c included
'linux/module.h' twice, remove the duplicates.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06 16:55:34 +05:30
Paul Gortmaker 13ae246db4 includecheck: delete any duplicate instances of module.h
Different tree maintainers picked up independently generated
trivial compile fixes based on linux-next testing, resulting
in some cases where a file would have got more than one addition
of module.h once everything was all merged together.

Delete any duplicates so includecheck isn't complaining about
anything related to module.h/export.h changes.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-28 19:31:56 -05:00
Viresh Kumar a1c4601679 dmaengine/dw_dmac: Remove unused fields in struct dw_dma_slave
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:39 +05:30
Viresh Kumar 327e697025 dmaengine/dw_dmac: Add support for DMA_SLAVE_CONFIG
This patch adds support for DMA_SLAVE_CONFIG in dwc DMAC controller. Fields in
struct dw_dma_slave for passing similar data are preserved in this patch untill
all existing users are fixed.

That will be handled later in this patchset.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:38 +05:30
Viresh Kumar 6bc711f6bd dmaengine/dw_dmac: Add 64 bit access width support for slave xfers on mem side
64 bit transfers are possible on both sides in slave transfers (memory as well
as peripherals). This patch adds support for it memory side 64 bit transfers.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:38 +05:30
Viresh Kumar ff7b05f29f dmaengine/dw_dmac: Don't handle block interrupts
Block interrupts give interrupt on completion of every LLI, which is actually
too much interrupts. This is just not required for current functioning of
dw_dmac.

So, just don't handle them at all.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:38 +05:30
Viresh Kumar 6c618c9de5 dmaengine/dw_dmac: Use dev_get_platdata() instead of accessing dev directly
Use already defined function dev_get_platdata() instead of accessing
pdev->dev.data.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:38 +05:30
Viresh Kumar e8d9f875c9 dmaengine/dw_dmac: Don't use magic number for total number of channels
Total number of channels is passed in pdata->nr_channels variable, thus we must
not use magic number '7' for total number of channels.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:38 +05:30
Viresh Kumar 8c9f7aa316 dmaengine/amba-pl08x: Take flow controller info from DMA_SLAVE_CONFIG
Flow controller information is passed now from DMA_SLAVE_CONFIG option. This
patch makes changes in pl08x driver to use device_fc from it instead of platform
data.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:37 +05:30
Rajeev KUMAR 7414a1b8b2 dmaengine/dw_dmac: Hibernation support in dw_dmac
The suspend and resume implementation is through dev_pm_ops in dmac. So
in order to support hibernation, freeze, thaw, restore and poweroff
features are required.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:15:36 +05:30
Adrian Hunter 91c1c9e36d dmaengine: intel_mid_dma: move pm_runtime_put
Move pm_runtime_put() to the end of intel_mid_dma_free_chan_resources()
because there is no sense in allowing runtime suspend while the driver
is still accessing the device.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:11:48 +05:30
Adrian Hunter 7f99a4216d dmaengine: intel_mid_dma: fix error status mask
The error status mask (MASK_ERR) has the same format as the other
masks (MASK_TFR, MASK_BLOCK etc) and must be cleared the same way.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22 18:11:48 +05:30
Masanari Iida b6695e411f dma: Fix typo in iop-adma.c
Correct spelling "allocted" to "allocated" in
drivers/dma/iop-adma.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-05 17:14:46 +01:00
Philippe Rétornaz b63fd6ce71 i.MX SDMA: Fix burstsize settings
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed
the mxcmmc driver but forgot to fix the SDMA driver to handle the
correct burtsize.
This make the SD card access works again with DMA on i.MX31 boards.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-02 14:12:47 +05:30
Philippe Rétornaz 94ac27a54b i.MX SDMA: Fix burstsize settings
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed
the mxcmmc driver but forgot to fix the SDMA driver to handle the
correct burtsize.
This make the SD card access works again with DMA on i.MX31 boards.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-02 14:00:43 +05:30
Vinod Koul e7211718b3 Merge branch 'fixes' into next 2012-02-01 22:31:28 +05:30
Guennadi Liakhovetski e9c8d7a03e dma: sh_dma: not all SH DMAC implementations support MEMCPY
Add a flag to allow platforms to specify, whether a DMAC instance supports
the MEMCPY operation. To avoid regressions, preserve the current default.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01 22:23:53 +05:30