Commit Graph

281 Commits

Author SHA1 Message Date
David S. Miller 0fb18c4777 Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Ok, we really do need to revert this, even with Bart's sis5513.c
fix in there.

The problem is that several driver's ->set_pio_mode() method
depends upon the drive->media type being set properly.  Most
of them use this to enable prefetching, which can only be done
for disk media.

But the commit being reverted here calls ->set_pio_mode() before
it's setup.  Actually it considers everything disk because that
is the default media type set by ide_port_init_devices_data().

The set of drivers that depend upon the media type in their
->set_pio_method() are:

drivers/ide/alim15x3.c
drivers/ide/it8172.c
drivers/ide/it8213.c
drivers/ide/pdc202xx_old.c
drivers/ide/piix.c
drivers/ide/qd65xx.c
drivers/ide/sis5513.c
drivers/ide/slc90e66.c

And it is possible that we could fix this by guarding the prefetching
and other media dependent setting changes with a test on
IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for
2.6.32-rcX and -stable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 04:52:50 -08:00
Bartlomiej Zolnierkiewicz 032665a26f Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
This reverts commit 24df31acaf.

The root cause of reported system hangs was (now fixed) sis5513 bug
and not "ide: try to use PIO Mode 0 during probe if possible" change
(commit 6029336426) so the revert was
incorrect (it simply replaced one regression with the other one).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:18 -07:00
David S. Miller 24df31acaf Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Based upon a report by David Fries, wherein his system hangs
on bootup with sis5513 controller, right after the CDROM
is registered by ide-cd.c and the TOC is first read.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04 21:00:17 -07:00
Joe Perches a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00
Bartlomiej Zolnierkiewicz fa56d4cb40 ide: allow ide_dev_read_id() to be called from the IRQ context
* Un-static __ide_wait_stat().

* Allow ide_dev_read_id() helper to be called from the IRQ context by
  adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed.

* Switch ide_driveid_update() to set irq_ctx flag.

This change is needed for the consecutive patch which fixes races in
handling of user-space SET XFER commands but for improved bisectability
and clarity it is better to do it in a separate patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Bartlomiej Zolnierkiewicz ffc36c7610 ide: fix handling of unexpected IRQs vs request_irq()
Add ide_host_enable_irqs() helper and use it in ide_host_register()
before registering ports.  Then remove no longer needed IRQ unmasking
from in init_irq().

This should fix the problem with "screaming" shared IRQ on the first
port (after request_irq() call while we have the unexpected IRQ pending
on the second port) which was uncovered by my rework of the serialized
interfaces support.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
Linus Torvalds e6423407d0 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...
2009-06-20 10:11:11 -07:00
Greg Kroah-Hartman fcb5207723 ide: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: linux-ide@vger.kernel.org
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Sergei Shtylyov f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Bartlomiej Zolnierkiewicz 5880b5de71 ide: don't enable IORDY at a probe time
* Add 'unsigned long port_flags' field to ide_hwif_t.

* Add IDE_PFLAG_PROBING port flag and keep it set during probing.

* Fix ide_pio_need_iordy() to not enable IORDY at a probe time
  (IORDY may lead to controller lock up on certain controllers
   if the port is not occupied).

Loosely based on the recent libata's fix by Tejun, thanks to Alan
for the hint that IDE may also need it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:54 +02:00
Hugh Dickins 5f4417a156 ide: fix PowerMac bootup oops
PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time():
because "ide: try to use PIO Mode 0 during probe if possible" causes
pmac_ide_set_pio_mode() to be called before drive->id has been set.

Bart points out other places which now need drive->id set earlier,
so follow his advice to allocate it in ide_port_alloc_devices()
(using kzalloc_node, without error message, as when allocating drive)
and memset it for reuse in ide_port_init_devices_data().

Fixed in passing: ide_host_alloc() was missing ide_port_free_devices()
from an error path.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-10 14:37:20 +02:00
Bartlomiej Zolnierkiewicz a20b2a44ec ide: skip probe if there are no devices on the port (v2)
In ide_probe_port() skip probe if ide_port_wait_ready() returns -ENODEV
and print error message instead of debug one if it returns -EBUSY.

v2:
Fix the default 'rc' value.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-08 22:07:28 +02:00
Bartlomiej Zolnierkiewicz 8bc1e5aa06 ide: respect quirk_drives[] list on all controllers
* Add ide_check_nien_quirk_list() helper to the core code
  and then use it in ide_port_tune_devices().

* Remove no longer needed ->quirkproc methods from hpt366.c
  and pdc202xx_{new,old}.c.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:09 +02:00
Bartlomiej Zolnierkiewicz 4c9773ed79 Merge branch 'for-linus' into for-next 2009-05-22 17:10:55 +02:00
Bartlomiej Zolnierkiewicz 28ee9bc5cc ide: report timeouts in ide_busy_sleep()
* change 'hwif' argument to 'drive'
* report an error on timeout

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:38 +02:00
Bartlomiej Zolnierkiewicz 9f36d31437 ide: remove hw_regs_t typedef
Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:25 +02:00
Bartlomiej Zolnierkiewicz dca3983059 ide: pass number of ports to ide_host_{alloc,add}() (v2)
Pass number of ports to ide_host_{alloc,add}() and then update
all users accordingly.

v2:
- drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c
  (noticed by Sergei)

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:24 +02:00
Bartlomiej Zolnierkiewicz 29e52cf793 ide: remove chipset field from hw_regs_t
* Convert host drivers that still use hw_regs_t's chipset field to use
  the one in struct ide_port_info instead.

* Move special handling of ide_pci chipset type from ide_hw_configure()
  to ide_init_port().

* Remove chipset field from hw_regs_t.

While at it:
- remove stale comment in delkin_cb.c

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:22 +02:00
Bartlomiej Zolnierkiewicz ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Joao Ramos 6029336426 ide: try to use PIO Mode 0 during probe if possible
Initially set PIO Mode 0 for all host drivers that have a 'set_pio_mode'
method before the IDE core figures out the most suited PIO mode for the
attached device.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 17:22:54 +02:00
Sergei Shtylyov 3153c26b54 ide: refactor tf_read() method
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and factoring out the code that
deals with the high order bytes into ide_tf_readback() to be called from the
only two functions interested, ide_complete_cmd() and ide_dump_sector().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for
the method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov c9ff9e7b64 ide: refactor tf_load() method
Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and moving the code that deals
with the high order bytes into the only function interested, do_rw_taskfile().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for the
method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov 60f85019c6 ide: replace IDE_TFLAG_* flags by IDE_VALID_*
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:01 +02:00
Geert Uytterhoeven aa07573b2b ide: Fix host drivers that need IRQF_SHARED
commit 255115fb35 ("ide: allow host drivers to
specify IRQ flags") added irq_flags fields to struct ide_port_info and struct
ide_host.  Drivers can now set ide_port_info.irq_flags = IRQF_SHARED, while
init_irq() passes ide_host.irq_flags to request_irq().

Unfortunately ide_host.irq_flags is never set, causing (on ARAnyM):

| Uniform Multi-Platform E-IDE driver
| ide: Falcon IDE controller
| Probing IDE interface ide0...
| hda: Sarge m68k, ATA DISK drive
| init_irq: sa = 0
| ide0: disabled, unable to get IRQ 15
| ide0: failed to initialize IDE interface
| ide0: disabling port

Solve this by copying ide_port_info.irq_flags to ide_host.irq_flags in
ide_host_alloc().

This bug probably affects the following IDE host drivers:
  - buddha
  - delkin_cb
  - falconide
  - gayle
  - ide-cs
  - macide
  - q40ide
  - scc_pata
  - sgiioc4

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:12:47 +02:00
Sergei Shtylyov fdd88f0af6 ide: inline SELECT_DRIVE()
Since SELECT_DRIVE() has boiled down to a mere dev_select() method call, it now
makes sense to just inline it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:33 +02:00
Sergei Shtylyov ecf3a31d2a ide: turn set_irq() method into write_devctl() method
Turn set_irq() method with its software reset hack into write_devctl() method
(for just writing a value into the device control register) at last...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Bartlomiej Zolnierkiewicz b5479167f4 ide: fix locking in drive_release_dev()
* Request queue cleanup should happen before freeing drive->id
  and marking device as non-present.  Fix it.

* Remove superfluous hwif->lock acquiring/releasing.

Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:25 +02:00
Bartlomiej Zolnierkiewicz 22aa4b32a1 ide: remove ide_task_t typedef
While at it:
- rename struct ide_task_s to struct ide_cmd
- remove stale comments from idedisk_{read_native,set}_max_address()
- drop unused 'cmd' argument from ide_{cmd,task}_ioctl()
- drop unused 'task' argument from tx4939ide_tf_load_fixup()
- rename ide_complete_task() to ide_complete_cmd()
- use consistent naming for struct ide_cmd variables

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:37 +01:00
Bartlomiej Zolnierkiewicz c094ea0774 ide: add IDE_HFLAG_4DRIVES host flag
Add IDE_HFLAG_4DRIVES host flag and use it instead of ide_4drives
chipset type in ide_init_port().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:28 +01:00
Bartlomiej Zolnierkiewicz 2787cb8ae5 ide: add IDE_HFLAG_DTC2278 host flag
Add IDE_HFLAG_DTC2278 host flag and use it instead of ide_dtc2278
chipset type in ide_init_port().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:28 +01:00
Bartlomiej Zolnierkiewicz 0a6e49e9bc ide: remove now superfluous check from ide_host_register()
There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:27 +01:00
Bartlomiej Zolnierkiewicz 255115fb35 ide: allow host drivers to specify IRQ flags
* Add ->irq_flags field to struct ide_port_info and struct ide_host.

* Update host drivers and IDE PCI code to use ->irq_flags field.

* Convert init_irq() and ide_intr() to use host->irq_flags.

This fixes handling of shared IRQs for non-PCI hosts
and removes ugly ifdeffery from core IDE code.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:27 +01:00
Bartlomiej Zolnierkiewicz 69197ad70e ide: fix memleak on failure in probe_for_drive()
Always free drive->id in probe_for_drive() if device is not present.

While at it:
- remove dead IDE_DFLAG_DEAD flag
- remove superfluous IDE_DFLAG_PRESENT check

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:26 +01:00
Bartlomiej Zolnierkiewicz e354c1d803 ide: remove IDE_ARCH_LOCK (v2)
* Add ->{get,release}_lock methods to struct ide_port_info
  and struct ide_host.

* Convert core IDE code, m68k IDE code and falconide support to use
  ->{get,release}_lock methods instead of ide_{get,release}_lock().

* Remove IDE_ARCH_LOCK.

v2:
* Build fix from Geert updating ide_{get,release}_lock() callers in
  falconide.c.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:22 +01:00
Bartlomiej Zolnierkiewicz 70775e9c62 ide: move ->rqsize init from init_irq() to ide_init_port()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:18 +01:00
Bartlomiej Zolnierkiewicz 2ebe1d9efe ide: use try_to_identify() in ide_driveid_update()
* Pass pointer to buffer for IDENTIFY data to do_identify()
  and try_to_identify().

* Un-static try_to_identify() and use it in ide_driveid_update().

* Rename try_to_identify() to ide_dev_read_id().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:59 +01:00
Bartlomiej Zolnierkiewicz 1bd4c1f4fe ide: classify device type in do_probe()
Defer classifying device type from do_identify() to do_probe().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:58 +01:00
Bartlomiej Zolnierkiewicz 552d3a99bd ide: remove broken EXABYTENEST support
do_identify() marks EXABYTENEST device as non-present and frees
drive->id so enable_nest() has absolutely no chance of working.

The code was like this since at least 2.6.12-rc2 and nobody
has noticed so just remove broken EXABYTENEST support.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:58 +01:00
Bartlomiej Zolnierkiewicz a182807a89 ide: remove try_to_identify() wrapper
There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:53 +01:00
Bartlomiej Zolnierkiewicz f77e03c68f ide: remove no longer needed IRQ auto-probing from try_to_identify() (v2)
v2:
Update actual_try_to_identify() documentation.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:53 +01:00
Bartlomiej Zolnierkiewicz 8b07ed26f8 ide: remove no longer needed IRQ fallback code from hwif_init()
Then remove no longer used __ide_default_irq().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:52 +01:00
Bartlomiej Zolnierkiewicz 80d15a607a ide: handle IDE_HFLAG[_FORCE]_LEGACY_IRQS in ide_pci_init_{one,two}()
Move handling of IDE_HFLAG[_FORCE]_LEGACY_IRQS from ide_init_port()
to ide_pci_init_{one,two}().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:49 +01:00
Bartlomiej Zolnierkiewicz 8b803bd184 ide: sanitize ACPI initialization
* ide_acpi_init() -> ide_acpi_init_port()

* ide_acpi_blacklist() -> ide_acpi_init()

* Call ide_acpi_init() only once (do it during IDE core
  initialization) and cleanup the function accordingly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:41 +01:00
Bartlomiej Zolnierkiewicz 7ed5b157d9 ide: add ide_for_each_present_dev() iterator
* Add ide_for_each_present_dev() iterator and convert IDE code to use it.

* Do some drive-by CodingStyle fixups in ide-acpi.c while at it.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:41 +01:00
Bartlomiej Zolnierkiewicz 0688d3a6ba ide: init_irq() doesn't need to hold ide_cfg_mtx
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:39 +01:00
Bartlomiej Zolnierkiewicz 7362951b48 ide: move ->lock and ->timer init from init_irq() to ide_init_port_data()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:39 +01:00
Bartlomiej Zolnierkiewicz d336ae3cf5 ide: no need to touch local IRQs in ide_probe_port()
Remove superfluous

	local_save_flags()
	local_irq_enable_in_hardirq()

	...

	local_irq_restore()

combo.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:39 +01:00
Bartlomiej Zolnierkiewicz 7610c4f5ef ide: fix IDE_DFLAG_NO_IO_32BIT handling
* IDE_DFLAG_NO_IO_32BIT may be set by cmd640's ->init_dev method
  so don't clear it in ide_port_tune_devices() (+ no need to do it).

* Move IDE_DFLAG_NO_IO_32BIT handling to ide_port_init_devices().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:38 +01:00
Stanislaw Gruszka 849d713000 ide: allow to wrap interrupt handler
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <linux@maxim.org.za>
[bart: minor checkpatch.pl / CodingStyle fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05 16:10:57 +01:00
Ian Campbell 51d6ac7011 IDE: Unregister and disable devices if initialization fails.
On reboot the loop in device_shutdown gets confused by these partially
initialized devices and goes into an infinite loop. Therefore unregister
and disable these devices.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[bart: remove leftover hwif->present clearing + update patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02 20:12:22 +01:00