Commit Graph

51 Commits

Author SHA1 Message Date
Marcel Holtmann a418b893a6 Bluetooth: Enable per-module dynamic debug messages
With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to
allow debugging without having to recompile the kernel. This patch turns
all BT_DBG() calls into pr_debug() to support dynamic debug messages.

As a side effect all CONFIG_BT_*_DEBUG statements are now removed and
some broken debug entries have been fixed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:28 +01:00
Marcel Holtmann e7c29cb16c [Bluetooth] Reject L2CAP connections on an insecure ACL link
The Security Mode 4 of the Bluetooth 2.1 specification has strict
authentication and encryption requirements. It is the initiators job
to create a secure ACL link. However in case of malicious devices, the
acceptor has to make sure that the ACL is encrypted before allowing
any kind of L2CAP connection. The only exception here is the PSM 1 for
the service discovery protocol, because that is allowed to run on an
insecure ACL link.

Previously it was enough to reject a L2CAP connection during the
connection setup phase, but with Bluetooth 2.1 it is forbidden to
do any L2CAP protocol exchange on an insecure link (except SDP).

The new hci_conn_check_link_mode() function can be used to check the
integrity of an ACL link. This functions also takes care of the cases
where Security Mode 4 is disabled or one of the devices is based on
an older specification.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann 09ab6f4c23 [Bluetooth] Enforce correct authentication requirements
With the introduction of Security Mode 4 and Simple Pairing from the
Bluetooth 2.1 specification it became mandatory that the initiator
requires authentication and encryption before any L2CAP channel can
be established. The only exception here is PSM 1 for the service
discovery protocol (SDP). It is meant to be used without any encryption
since it contains only public information. This is how Bluetooth 2.0
and before handle connections on PSM 1.

For Bluetooth 2.1 devices the pairing procedure differentiates between
no bonding, general bonding and dedicated bonding. The L2CAP layer
wrongly uses always general bonding when creating new connections, but it
should not do this for SDP connections. In this case the authentication
requirement should be no bonding and the just-works model should be used,
but in case of non-SDP connection it is required to use general bonding.

If the new connection requires man-in-the-middle (MITM) protection, it
also first wrongly creates an unauthenticated link key and then later on
requests an upgrade to an authenticated link key to provide full MITM
protection. With Simple Pairing the link key generation is an expensive
operation (compared to Bluetooth 2.0 and before) and doing this twice
during a connection setup causes a noticeable delay when establishing
a new connection. This should be avoided to not regress from the expected
Bluetooth 2.0 connection times. The authentication requirements are known
up-front and so enforce them.

To fulfill these requirements the hci_connect() function has been extended
with an authentication requirement parameter that will be stored inside
the connection information and can be retrieved by userspace at any
time. This allows the correct IO capabilities exchange and results in
the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann 63fbd24e51 [Bluetooth] Consolidate maintainers information
The Bluetooth entries for the MAINTAINERS file are a little bit too
much. Consolidate them into two entries. One for Bluetooth drivers and
another one for the Bluetooth subsystem.

Also the MODULE_AUTHOR should indicate the current maintainer of the
module and actually not the original author. Fix all Bluetooth modules
to provide current maintainer information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18 13:23:53 +02:00
Marcel Holtmann b1235d7961 [Bluetooth] Allow security for outgoing L2CAP connections
When requested the L2CAP layer will now enforce authentication and
encryption on outgoing connections. The usefulness of this feature
is kinda limited since it will not allow proper connection ownership
tracking until the authentication procedure has been finished. This
is a limitation of Bluetooth 2.0 and before and can only be fixed by
using Simple Pairing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:54 +02:00
Marcel Holtmann 3241ad820d [Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO
Enable the common timestamp functionality that the network subsystem
provides for L2CAP, RFCOMM and SCO sockets. It is possible to either
use SO_TIMESTAMP or the IOCTLs to retrieve the timestamp of the
current packet.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann 40be492fe4 [Bluetooth] Export details about authentication requirements
With the Simple Pairing support, the authentication requirements are
an explicit setting during the bonding process. Track and enforce the
requirements and allow higher layers like L2CAP and RFCOMM to increase
them if needed.

This patch introduces a new IOCTL that allows to query the current
authentication requirements. It is also possible to detect Simple
Pairing support in the kernel this way.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann 9719f8afce [Bluetooth] Disconnect when encryption gets disabled
The Bluetooth specification allows to enable or disable the encryption
of an ACL link at any time by either the peer or the remote device. If
a L2CAP or RFCOMM connection requested an encrypted link, they will now
disconnect that link if the encryption gets disabled. Higher protocols
that don't care about encryption (like SDP) are not affected.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:45 +02:00
Marcel Holtmann 79d554a697 [Bluetooth] Change retrieval of L2CAP features mask
Getting the remote L2CAP features mask is really important, but doing
this as less intrusive as possible is tricky. To play nice with older
systems and Bluetooth qualification testing, the features mask is now
only retrieved in two specific cases and only once per lifetime of an
ACL link.

When trying to establish a L2CAP connection and the remote features mask
is unknown, the L2CAP information request is sent when the ACL link goes
into connected state. This applies only to outgoing connections and also
only for the connection oriented channels.

The second case is when a connection request has been received. In this
case a connection response with the result pending and the information
request will be send. After receiving an information response or if the
timeout gets triggered, the normal connection setup process with security
setup will be initiated.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:44 +02:00
Harvey Harrison 8398531939 bluetooth: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:25:46 -07:00
David S. Miller e1ec1b8ccd Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/s2io.c
2008-04-02 22:35:23 -07:00
Robert P. J. Day d5fb2962c6 bluetooth: replace deprecated RW_LOCK_UNLOCKED macros
The older RW_LOCK_UNLOCKED macros defeat lockdep state tracing so
replace them with the newer __RW_LOCK_UNLOCKED macros.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28 16:17:38 -07:00
YOSHIFUJI Hideaki 3b1e0a655f [NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.
Introduce per-sock inlines: sock_net(), sock_net_set()
and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:55 +09:00
Dave Young 8e8440f535 [BLUETOOTH]: l2cap info_timer delete fix in hci_conn_del
When the l2cap info_timer is active the info_state will be set to
L2CAP_INFO_FEAT_MASK_REQ_SENT, and it will be unset after the timer is
deleted or timeout triggered.

Here in l2cap_conn_del only call del_timer_sync when the info_state is
set to L2CAP_INFO_FEAT_MASK_REQ_SENT.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03 12:18:55 -08:00
Thomas Gleixner 3ab2273175 bluetooth: delete timer in l2cap_conn_del()
Delete a possibly armed timer before kfree'ing the connection object.

Solves: http://lkml.org/lkml/2008/2/15/514

Reported-by:Quel Qun <kelk1@comcast.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26 17:42:56 -08:00
Pavel Emelyanov b24b8a247f [NET]: Convert init_timer into setup_timer
Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:35 -08:00
Pavel Emelyanov 6257ff2177 [NET]: Forget the zero_it argument of sk_alloc()
Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.

Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.

This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope 
this particular split helped.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:39:31 -07:00
Marcel Holtmann 6464f35f37 [Bluetooth] Fall back to L2CAP in basic mode
In case the remote entity tries to negogiate retransmission or flow
control mode, reject it and fall back to basic mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:43 -07:00
Marcel Holtmann f0709e03ac [Bluetooth] Advertise L2CAP features mask support
Indicate the support for the L2CAP features mask value when the remote
entity tries to negotiate Bluetooth 1.2 specific features.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:42 -07:00
Marcel Holtmann 4e8402a3f8 [Bluetooth] Retrieve L2CAP features mask on connection setup
The Bluetooth 1.2 specification introduced a specific features mask
value to interoperate with newer versions of the specification. So far
this piece of information was never needed, but future extensions will
rely on it. This patch adds a generic way to retrieve this information
only once per connection setup.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:41 -07:00
Marcel Holtmann 861d6882b3 [Bluetooth] Remove global conf_mtu variable from L2CAP
After the change to the L2CAP configuration parameter handling the
global conf_mtu variable is no longer needed and so remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:41 -07:00
Marcel Holtmann 876d9484ed [Bluetooth] Finish L2CAP configuration only with acceptable settings
The parameters of the L2CAP output configuration might not be accepted
after the first configuration round. So only indicate a finished output
configuration when acceptable settings are provided.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:40 -07:00
Eric W. Biederman 1b8d7ae42d [NET]: Make socket creation namespace safe.
This patch passes in the namespace a new socket should be created in
and has the socket code do the appropriate reference counting.  By
virtue of this all socket create methods are touched.  In addition
the socket create methods are modified so that they will fail if
you attempt to create a socket in a non-default network namespace.

Failing if we attempt to create a socket outside of the default
network namespace ensures that as we incrementally make the network stack
network namespace aware we will not export functionality that someone
has not audited and made certain is network namespace safe.
Allowing us to partially enable network namespaces before all of the
exotic protocols are supported.

Any protocol layers I have missed will fail to compile because I now
pass an extra parameter into the socket creation code.

[ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ]

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:07 -07:00
Al Viro d83852822c [BLUETOOTH] l2cap: don't mangle cmd.len
Since nobody uses it after we convert it to host-endian,
no need to do that at all.  At that point l2cap is endian-clean.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:09 -07:00
Al Viro 88219a0f65 [BLUETOOTH]: pass (host-endian) cmd length as explicit argument to l2cap_conf_req()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:08 -07:00
Al Viro 8e036fc314 [BLUETOOTH] l2cap: endianness annotations
no code changes, just documenting existing types

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:07 -07:00
Al Viro 6dc0c2082b [BLUETOOTH]: Fix endianness bug in l2cap_sock_listen()
We loop through psm values, calling __l2cap_get_sock_by_addr(psm, ...)
until we get NULL; then we set ->psm of our socket to htobs(psm).
IOW, we find unused psm value and put it into our socket.  So far, so
good, but...  __l2cap_get_sock_by_addr() compares its argument with
->psm of sockets.  IOW, the entire thing works correctly only on
little-endian.  On big-endian we'll get "no socket with such psm"
on the first iteration, since we won't find a socket with ->psm == 0x1001.
We will happily conclude that 0x1001 is unused and slap htobs(0x1001)
(i.e. 0x110) into ->psm of our socket.  Of course, the next time around
the same thing will repeat and we'll just get a fsckload of sockets
with the same ->psm assigned.

Fix: pass htobs(psm) to __l2cap_get_sock_by_addr() there.  All other
callers are already passing little-endian values and all places that
store something in ->psm are storing little-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:06 -07:00
Marcel Holtmann 5dee9e7c4c [Bluetooth] Fix L2CAP configuration parameter handling
The L2CAP configuration parameter handling was missing the support
for rejecting unknown options. The capability to reject unknown
options is mandatory since the Bluetooth 1.2 specification. This
patch implements its and also simplifies the parameter parsing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-24 14:27:19 +02:00
Marcel Holtmann 0878b6667f [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks
The L2CAP and HCI setsockopt() implementations have a small information
leak that makes it possible to leak kernel stack memory to userspace.

If the optlen parameter is 0, no data will be copied by copy_from_user(),
but the uninitialized stack buffer will be read and stored later. A call
to getsockopt() can now retrieve the leaked information.

To fix this problem the stack buffer given to copy_from_user() must be
initialized with the current settings.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:35:59 +02:00
Arnaldo Carvalho de Melo d626f62b11 [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}
To clearly state the intent of copying from linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25 22:28:23 -07:00
YOSHIFUJI Hideaki aca3192cc6 [NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:54 -07:00
YOSHIFUJI Hideaki 8e87d14255 [NET] BLUETOOTH: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:20 -08:00
Marcel Holtmann 847641d7db [Bluetooth] Restrict well known PSM to privileged users
The PSM values below 0x1001 of L2CAP are reserved for well known
services. Restrict the possibility to bind them to privileged
users.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-22 22:00:45 +01:00
Marcel Holtmann 7386397636 [Bluetooth] Missing endian swapping for L2CAP socket list
The PSM value in the L2CAP socket list must be converted to host
order before printing it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-22 22:00:40 +01:00
Peter Zijlstra fcc70d5fdc [BLUETOOTH] lockdep: annotate sk_lock nesting in AF_BLUETOOTH
=============================================
[ INFO: possible recursive locking detected ]
2.6.18-1.2726.fc6 #1
2006-12-02 21:21:35 -08:00
Marcel Holtmann 354f60a995 [Bluetooth] Ignore L2CAP config requests on disconnect
Any L2CAP connection in disconnecting state shall not response
to any further config requests from the remote side. So in case
such a request is received, ignore it.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:32 -08:00
Marcel Holtmann 820ae1b865 [Bluetooth] Always include MTU in L2CAP config responses
When sending a positive config response it shall include the actual
MTU to be used on this channel. This differs from the Bluetooth 1.1
specification where it was enough to acknowledge the config request.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:31 -08:00
Marcel Holtmann 74da626a10 [Bluetooth] Add locking for bt_proto array manipulation
The bt_proto array needs to be protected by some kind of locking to
prevent a race condition between bt_sock_create and bt_sock_register.

And in addition all calls to sk_alloc need to be made GFP_ATOMIC now.

Signed-off-by: Masatake YAMATO <jet@gyve.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:34 -07:00
Marcel Holtmann df5c37ea9a [Bluetooth] Handle return values from driver core functions
Some return values of the driver core register and create functions
are not handled and so might cause unexpected problems.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:28 -07:00
Marcel Holtmann fd1278d720 [Bluetooth] Fix deadlock in the L2CAP layer
The Bluetooth L2CAP layer has 2 locks that are used in softirq context,
(one spinlock and one rwlock, where the softirq usage is readlock) but
where not all usages of the lock were _bh safe. The patch below corrects
this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:35 -07:00
Marcel Holtmann 0139418c94 [Bluetooth] Small cleanup of the L2CAP source code
This patch is a small cleanup of the L2CAP source code. It makes some
coding style changes and moves some functions around to avoid forward
declarations.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:05 -07:00
Marcel Holtmann a91f2e396f [Bluetooth] Use real devices for host controllers
This patch converts the Bluetooth class devices into real devices. The
Bluetooth class is kept and the driver core provides the appropriate
symlinks for backward compatibility.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:02 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Randy Dunlap 4fc268d24c [PATCH] capable/capability.h (net/)
net: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:14 -08:00
Eric Dumazet 90ddc4f047 [NET]: move struct proto_ops to const
I noticed that some of 'struct proto_ops' used in the kernel may share
a cache line used by locks or other heavily modified data. (default
linker alignement is 32 bytes, and L1_CACHE_LINE is 64 or 128 at
least)

This patch makes sure a 'struct proto_ops' can be declared as const,
so that all cpus can share all parts of it without false sharing.

This is not mandatory : a driver can still use a read/write structure
if it needs to (and eventually a __read_mostly)

I made a global stubstitute to change all existing occurences to make
them const.

This should reduce the possibility of false sharing on SMP, and
speedup some socket system calls.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:15 -08:00
Benjamin LaHaise c1cbe4b7ad [NET]: Avoid atomic xchg() for non-error case
It also looks like there were 2 places where the test on sk_err was
missing from the event wait logic (in sk_stream_wait_connect and
sk_stream_wait_memory), while the rest of the sock_error() users look
to be doing the right thing.  This version of the patch fixes those,
and cleans up a few places that were testing ->sk_err directly.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:10:44 -08:00
Marcel Holtmann be9d122730 [Bluetooth]: Remove the usage of /proc completely
This patch removes all relics of the /proc usage from the Bluetooth
subsystem core and its upper layers. All the previous information are
now available via /sys/class/bluetooth through appropriate functions.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 09:57:38 -08:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Victor Fusco 2eb25a6c34 [Bluetooth]: Fix sparse warnings (__nocast type)
This patch fixes the sparse warnings "implicit cast to nocast type"
for the priority or gfp_mask parameters of the memory allocations.

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:55:07 -07:00
Al Viro b453257f05 [PATCH] kill gratitious includes of major.h under net/*
A lot of places in there are including major.h for no reason whatsoever.
Removed.  And yes, it still builds. 

The history of that stuff is often amusing.  E.g.  for net/core/sock.c
the story looks so, as far as I've been able to reconstruct it: we used
to need major.h in net/socket.c circa 1.1.early.  In 1.1.13 that need
had disappeared, along with register_chrdev(SOCKET_MAJOR, "socket",
&net_fops) in sock_init().  Include had not.  When 1.2 -> 1.3 reorg of
net/* had moved a lot of stuff from net/socket.c to net/core/sock.c,
this crap had followed... 

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 18:32:13 -07:00