Commit Graph

236 Commits

Author SHA1 Message Date
Dmitry Torokhov 30b37131aa Input: synaptics_i2c - switch to using __cancel_delayed_work()
cancel_delayed_work() may spin and therefore should not be used in
interrupt contexts.

Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17 23:24:01 -07:00
Dmitry Torokhov 181d683d75 Input: libps2 - additional locking for i8042 ports
The serio ports on i8042 are not completely isolated; while we provide
enough locking to ensure proper serialization when accessing control
and data registers AUX and KBD ports can still have an effect on each
other on PS/2 protocol level. The most prominent effect is that
issuing a command for the device connected to one port may cause
abort of the command currently executing by the device connected to
another port.

Since i8042 nor serio subsystem are not aware of the details of the
PS/2 protocol (length of the commands and their replies and so on) the
locking should be done on libps2 level by adding special handling when
we see that we are dealing with serio port on i8042.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17 23:23:45 -07:00
Henrik Rydberg 9de48cc300 Input: bcm5974 - silence uninitialized variables warnings
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-13 09:13:38 -07:00
Dmitry Torokhov b7802c5c1e Input: psmouse - use boolean type
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:38 -07:00
Tai-hwa Liang fc69f4a6af Input: add new driver for Sentelic Finger Sensing Pad
This is the driver for Sentelic Finger Sensing Pad which can be found
on MSI WIND Netbook.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19 21:46:09 -07:00
Dmitry Torokhov 3b72094409 Input: psmouse - allow defining read-only attributes
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19 21:14:20 -07:00
Dmitry Torokhov fa71c605c2 Input: combine hil_kbd and hil_ptr drivers
hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 13:27:27 -07:00
Dmitry Torokhov dd0d5443da Input: serio - don't use serio->write() directly
We have a nice wrapper for that.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 00:43:43 -07:00
Paul Fox c46dd1eb9a Input: hgpk - forced recalibration for the OLPC touchpad
The OLPC XO laptop incorporates a combination touchpad/tablet device
which unfortunately requires frequent recalibration.  The driver will
force this automatically when various suspicious behaviors are
observed, and the user can recalibrate manually (with a special
keyboard sequence). There's currently no way, however, for an external
program to cause recalibration. We can not use the reconnect
capability which is already available in /sys because full reset of
the touchpad takes 1.1 - 1.2 secons which is too long.

This patch creates a new node in /sys which, when written with '1',
will force a touchpad recalibration; no other writes (or reads)
of this node are supported.

Signed-off-by: Paul Fox <pgf@laptop.org>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 00:34:32 -07:00
Saeed Bishara eeafa5ef6d Input: gpio_mouse - use standard driver registration method
This patch is needed when the gpio's became available only at late
stages, for example, when using i2c gpio expander.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07 22:47:14 -07:00
Mike Rapoport eef3e4cab7 Input: add driver for Synaptics I2C touchpad
This driver supports Synaptics I2C touchpad controller on eXeda
mobile device. Unfortunaltely it only works in relative mode and
thus is not comaptible with Xorg Synaptics driver.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19 22:56:45 -07:00
Tero Saarni ec20a022aa Input: synaptics - add support for reporting x/y resolution
Synaptics uses anisotropic coordinate system.  On some wide touchpads
vertical resolution can be twice as high as horizontal which causes
unequal sensitivity on x/y directions.  Add support for reading the
resolution with EVIOCGABS ioctl.

Signed-off-by: Tero Saarni <tero.saarni@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19 22:55:17 -07:00
Ulrich Dangel d7ed5d883c Input: ALPS - handle touchpoints buttons correctly
When pressing any button belonging to the touchpoint, the generated
click events don't belong to the touchpoint but to the touchpad.
This patch fixes this behaviour, the events will be sent via the
correct device, so scrolling with touchpoint is possible.

Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:09:45 -07:00
Jeremy Huddleston 05e882f890 Input: appletouch - improve finger detection
The appletouch driver is prone to reporting multiple fingers when only
one is pressing.  The appletouch driver queries an array of pressure
sensors and counts local maxima in pressure to determine the number of
fingers.  It just does this on the raw values, so a data stream like:

0 100 250 300 299 300 250 100 0

actually registers as 2 fingers.

This patch updates the logic to ignore small dips in pressure that are
less than the threshold.

Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-03 07:37:54 -07:00
Zephaniah E. Hull 535650fd70 Input: psmouse - ESD workaround fix for OLPC XO touchpad
It appears that when the XO touchpad unit resets from ESD, it sends AA
AA instead of AA 00, the psmouse-base code handles the case of AA 00 by
triggering a serio reconnect for the port, causing a full reprobe of
the device.

Testing with OFW shows that this is likely to solve the problem, so
the attached patch simply expands the existing test to also catch AA AA.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 19:24:18 -07:00
Dmitry Torokhov 9b771ac442 Input: lifebook - don't send incomplete events
When we get a relative packet from trackpoint (when we deal with
touchscreen/trackpoint combo) we should not send events for the device
corresponding to touchscreen as it confuses evtouch driver (it looks
like it keeps previously reported absolute coordinates and the cursor
stays in the same place).

Reported-by: Marcin Drewka <laimoriel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08 18:31:49 -07:00
Dmitry Torokhov af27a69aab Input: ALPS - Dell Latitude D630/D800 have DualPoint
Dell Latitude D630/D800 have DualPoint (touchpad plus trackpoint)
instead of a simple touchpad and a pass-through port for external
PS/2 mouse.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2009-05-08 18:31:21 -07:00
Linus Torvalds 8c0c3f7ff0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: document the multi-touch (MT) protocol
  Input: add detailed multi-touch finger data report protocol
  Input: allow certain EV_ABS events to bypass all filtering
  Input: bcm5974 - add documentation for the driver
  Input: bcm5974 - augment debug information
  Input: bcm5974 - Add support for the Macbook 5 (Unibody)
  Input: bcm5974 - add quad-finger tapping
  Input: bcm5974 - prepare for a new trackpad header type
  Input: appletouch - fix DMA to/from stack buffer
  Input: wacom - fix TabletPC touch bug
  Input: lifebook - add DMI entry for Fujitsu B-2130
  Input: ALPS - add signature for Toshiba Satellite Pro M10
  Input: elantech - make sure touchpad is really in absolute mode
  Input: elantech - provide a workaround for jumpy cursor on firmware 2.34
  Input: ucb1400 - use disable_irq_nosync() in irq handler
  Input: tsc2007 - use disable_irq_nosync() in irq handler
  Input: sa1111ps2 - use disable_irq_nosync() in irq handlers
  Input: omap-keypad - use disable_irq_nosync() in irq handler
2009-05-02 16:35:45 -07:00
Henrik Rydberg 5340219317 Input: bcm5974 - augment debug information
Add more button and finger data to the debug output.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:36:01 -07:00
Henrik Rydberg 158e928741 Input: bcm5974 - Add support for the Macbook 5 (Unibody)
This patch adds support for the new unibody Macbook, with physically
integrated button and trackpad. Since the integrated button changes
the logic for touch-and-click, a device capability bit mask is now
reported in input_id.version, which can be picked up by user space
via a EVIOCGID call.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: David M. Lary <dmlary@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:35:52 -07:00
Henrik Rydberg 6916d97f6e Input: bcm5974 - add quad-finger tapping
The integrated button on the new unibody Macbooks presents a need to
report explicit four-finger actions. Evidently, the finger pressing
the button is also touching the trackpad, so in order to fully support
three-finger actions, the driver must be able to report four-finger
actions. This patch adds a new button, BTN_TOOL_QUADTAP, which
achieves this.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:35:12 -07:00
Henrik Rydberg 9894cf0ff5 Input: bcm5974 - prepare for a new trackpad header type
The new unibody Macbooks are equipped with an integrated button and
trackpad. The package header of the trackpad interface has changed to
also contain information about the integrated button.  This patch
performs the necessary preparations to allow for the new package
header.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:35:03 -07:00
Bob Copeland 0385c5ee3c Input: appletouch - fix DMA to/from stack buffer
CONFIG_DMA_API_DEBUG spotted an instance of appletouch using
an array on the stack as a DMA buffer for certain hardware.
Change it to use a kmalloc()ed buffer instead.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:34:13 -07:00
Adrian McMenamin 6b3480855a maple: input: fix up maple mouse driver
The maple mouse driver currently in mainline is broken:

bash-3.1# modprobe maplemouse
[   56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3
[   56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[   56.930543] pc = c003304e
[   56.934973] *pde = 00000000
[   56.944948] Oops: 0000 [#1]
[   56.947867] Modules linked in: maplemouse(+)
[   56.952353]
[   56.953921] Pid : 1157, Comm: \0x09\0x09modprobe
[   56.958021] CPU : 0        \0x09\0x09Not tainted  (2.6.30-rc2-00130-g3e98f9f #1)
[   56.958052]
[   56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse]
[   56.972125] PR is at input_open_device+0x8a/0xc0
[   56.976944] PC  : c003304e SP  : 8c88bdcc SR  : 40008100 TEA : c0033834
[   56.983854] R0  : 000006c4 R1  : 00000000 R2  : 40008101 R3  : 00000000
[   56.990744] R4  : 8c8db800 R5  : c0033080 R6  : 00000005 R7  : 00000200
[   56.997635] R8  : 8c8db800 R9  : 8c8dbe3c R10 : 00000000 R11 : 8c98881c
[   57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4
[   57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR  : 8c1b4d0a
[   57.016939]
...

Here is a fix for this, keeping an open and close, so reducing
the load on the system when the mouse is not in use, and also properly
referencing the maple device buffer following the recent update.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-27 09:22:31 +09:00
Dmitry Torokhov 6b9ff696ba Input: lifebook - add DMI entry for Fujitsu B-2130
Although we already have entry for ZEPHYR the match is done
on product name whereas B-2130 BIOS has it in board name.

Reported-by: Yuriy Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-24 15:18:22 -07:00
Dmitry Torokhov b75d17285b Input: ALPS - add signature for Toshiba Satellite Pro M10
This toshiba has a touchpad with trackpoint and 2 sets of left
and right buttons (above and below touchpad).

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-23 19:36:03 -07:00
Arjan Opmeer b2546df69b Input: elantech - make sure touchpad is really in absolute mode
There exist laptops with Elantech touchpads where switching to absolute mode
does not happen, although writing the configuration register succeeds
without error. Reading back the register afterwards reveils that the
absolute mode bit is not set as if masked out by the touchpad firmware.

Always read back register 0x10, make sure that for hardware version 1 the
absolute mode bit is actually set and fail otherwise. This prevents the case
where the touchpad is claimed by the Elantech driver but is nonetheless not
working.

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18 19:11:59 -07:00
Arjan Opmeer 3f8c0df43d Input: elantech - provide a workaround for jumpy cursor on firmware 2.34
It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ
suffers from a problem where bogus coordinates get reported at the beginning
of a touch action. This causes the mouse cursor or the scrolled page to
jump.

Included patch provides a workaround that discards mouse packets that are
likely to contain bogus coordinates. The workaround is activated when we
detect touchpad with fimware version 2.34.

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18 19:11:51 -07:00
Dmitry Torokhov 0c387ec88a Merge branch 'next' into for-linus 2009-04-16 08:51:52 -07:00
Ilpo Järvinen 9a03fbe802 Input: pc110pad - remove unused variable dev
dev is leftover from b0ee0d3eb3
(Input: pc110pad - use no_pci_devices()).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 09:04:03 -07:00
Dmitry Torokhov ba28f22e7c Merge branch 'next' into for-linus 2009-04-08 00:00:33 -07:00
Linus Torvalds 811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Jean Delvare bf6aede712 workqueue: add to_delayed_work() helper function
It is a fairly common operation to have a pointer to a work and to need a
pointer to the delayed work it is contained in.  In particular, all
delayed works which want to rearm themselves will have to do that.  So it
would seem fair to offer a helper function for this operation.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:50 -07:00
Uwe Kleine-Koenig 3a070ad144 trivial: fix typo "varaible" -> "variable"
This patch was created by

	git grep -l '[vV]araible' | xargs -r -t perl -p -i -e 's/\b([Vv]ar)ai(bles?)\b/$1ia$2/g'

Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:57 +02:00
Linus Torvalds 0fe41b8982 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...
2009-03-28 14:03:14 -07:00
Russell King 997302259f [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:21:35 +00:00
Dmitry Torokhov d15c22e786 Merge commit 'v2.6.29-rc7' into next 2009-03-08 16:30:55 -07:00
Ingo Molnar 8b0e5860cb Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', 'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core 2009-03-04 02:22:31 +01:00
Linus Torvalds 6b3bf20491 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - touchpad driver miss-recognising logitech mice
  Input: synaptics - ensure we reset the device on resume
  Input: usbtouchscreen - fix eGalax HID ignoring
  Input: ambakmi - fix timeout handling in amba_kmi_write()
  Input: pxa930_trkball - fix write timeout handling
  Input: struct device - replace bus_id with dev_name(), dev_set_name()
  Input: bf54x-keys - fix debounce time validation
  Input: spitzkbd - mark probe function as __devinit
  Input: omap-keypad - mark probe function as __devinit
  Input: corgi_ts - mark probe function as __devinit
  Input: corgikbd - mark probe function as __devinit
  Input: uvc - the button on the camera is KEY_CAMERA
  Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86
  Input: atkbd - make forced_release_keys[] static
  Input: usbtouchscreen - allow reporting calibrated data
2009-03-02 15:43:03 -08:00
Andy Whitcroft 0f4954819f Input: psmouse - add newline to OLPC HGPK touchpad debugging
When probing for the OLPC HGPK touchpad the ID of the probed touchpad is
emitted, but the debug is missing the terminating newline.  This causes
later information to run into it, and for that to be categorised
incorrectly at KERN_DBG.  Fix this up.

Reported-by: Matt Zimmerman <mdz@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:56:23 -08:00
Arjan Opmeer 9ab7b25e6a Input: elantech - touchpad driver miss-recognising logitech mice
Some Logitech mice react to the magic knock like Elantech touchpad would.
This leads to those mice being misdetected as Elantech touchpads.  Add a
version query to elantech_detect() to distinguish the two.

[dtor@mail.ru:
 - lower severity of some messages - when we are not sure yet if
   device is Elantech or not not responding to knock is not an error.
]

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:39 -08:00
Andy Whitcroft 4d36845680 Input: synaptics - ensure we reset the device on resume
When resuming from suspend newer Synaptics touchpads do not recover
correctly.  Analysis of the resume sequence as applied in Linux was
compared to that of other operating systems.  This indicated that the
other OSs were resetting the mouse before attempting to detect it (for
all Synaptics touchpads, old and new).  Applying this same modification
fixes these newer Synaptics touchpads and brings the driver into line
with common OS reset behaviour.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:32 -08:00
Roel Kluin bc34496d63 Input: pxa930_trkball - fix write timeout handling
With a postfix decrement i reaches -1 rather than 0,
but after the loop it is tested whether it has become 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-01 16:58:07 -08:00
Roel Kluin b0ee0d3eb3 Input: pc110pad - use no_pci_devices()
Use no_pci_devices() helper instead of doing explicit get/put.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-29 23:07:17 -08:00
Adrian McMenamin 03dd5e1ba5 Input: add support for the Maple mouse on the SEGA Dreamcast
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-29 23:07:09 -08:00
Yinghai Lu 4272ebfbef x86: allow more than 8 cpus to be used on 32-bit
X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 00:20:22 +01:00
Jean Delvare 3c0340b774 Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86
All Fujitsu-Siemens Lifebook systems are x86-based, so we might
as well make MOUSE_PS2_LIFEBOOK depend on X86. This will avoid
surprising things like:

arch/arm/configs/s3c2410_defconfig:CONFIG_MOUSE_PS2_LIFEBOOK=y

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-10 23:46:07 -08:00
Russell King d8f2f1808a [ARM] fix pxa930_trkball build errors
drivers/input/mouse/pxa930_trkball.c: In function `pxa930_trkball_probe':
drivers/input/mouse/pxa930_trkball.c:189: error: `ret' undeclared (first use in this function)
drivers/input/mouse/pxa930_trkball.c:230: error: `ret' undeclared (first use in this function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 16:29:44 +00:00
Helge Deller c10a93a0a3 Input: HIL drivers - add MODULE_ALIAS()
Add MODULE_ALIAS() to the HIL keyboard (hil_kbd.c) and HIL mouse
(hil_ptr.c) drivers to make kernel module autoloader functional.
Report HIL port number ID in serio id.id field.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-30 00:57:12 -08:00
Yong Yao 105ca2398f Input: add support for trackball on pxa930 and pxa935
Signed-off-by: Yong Yao <yaoyong@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-29 04:58:58 -08:00