Commit Graph

746 Commits

Author SHA1 Message Date
Dennis Chen c75343972b efi/arm: Fix the format of EFI debug messages
When both EFI and memblock debugging is enabled on the kernel command line:

  'efi=debug memblock=debug'

.. the debug messages for early_con look the following way:

 [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]
 [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
 [    0.000000] *
 ...

Note the misplaced '*' line, which happened because the memblock debug message
was printed while the EFI debug message was still being constructed..

This patch fixes the output to be the expected:

 [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]*
 [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
 ...

Note how the '*' is now in the proper EFI debug message line.

Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Steve McIntyre <steve@einval.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1464690224-4503-3-git-send-email-matt@codeblueprint.co.uk
[ Made the changelog more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-03 09:57:36 +02:00
Linus Torvalds 3aa2fc1667 driver core update for 4.7-rc1
Here's the "big" driver core update for 4.7-rc1.
 
 Mostly just debugfs changes, the long-known and messy races with removing
 debugfs files should be fixed thanks to the great work of Nicolai Stange.  We
 also have some isa updates in here (the x86 maintainers told me to take it
 through this tree), a new warning when we run out of dynamic char major
 numbers, and a few other assorted changes, details in the shortlog.
 
 All have been in linux-next for some time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0mwACgkQMUfUDdst+ynjXACgjNxR5nMUiM8ZuuD0i4Xj7VXd
 hnIAoM08+XDCv41noGdAcKv+2WZVZWMC
 =i+0H
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the "big" driver core update for 4.7-rc1.

  Mostly just debugfs changes, the long-known and messy races with
  removing debugfs files should be fixed thanks to the great work of
  Nicolai Stange.  We also have some isa updates in here (the x86
  maintainers told me to take it through this tree), a new warning when
  we run out of dynamic char major numbers, and a few other assorted
  changes, details in the shortlog.

  All have been in linux-next for some time with no reported issues"

* tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case"
  gpio: ws16c48: Utilize the ISA bus driver
  gpio: 104-idio-16: Utilize the ISA bus driver
  gpio: 104-idi-48: Utilize the ISA bus driver
  gpio: 104-dio-48e: Utilize the ISA bus driver
  watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
  iio: stx104: Add X86 dependency to STX104 Kconfig option
  Documentation: Add ISA bus driver documentation
  isa: Implement the max_num_isa_dev macro
  isa: Implement the module_isa_driver macro
  pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS
  isa: Decouple X86_32 dependency from the ISA Kconfig option
  driver-core: use 'dev' argument in dev_dbg_ratelimited stub
  base: dd: don't remove driver_data in -EPROBE_DEFER case
  kernfs: Move faulting copy_user operations outside of the mutex
  devcoredump: add scatterlist support
  debugfs: unproxify files created through debugfs_create_u32_array()
  debugfs: unproxify files created through debugfs_create_blob()
  debugfs: unproxify files created through debugfs_create_bool()
  ...
2016-05-20 21:26:15 -07:00
Linus Torvalds 07b75260eb Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...
2016-05-19 10:02:26 -07:00
Linus Torvalds d974f09ea4 Merge branch 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull iscsi_ibft updates from Konrad Rzeszutek Wilk:
 "The pull has two features - both of them expand the SysFS entries:

   - 'prefix-len' - which is subnet_mask_prefix of the iBFT header.

   - 'acpi_header' dir with: 'iBFT', OEM-ID (whatever it extracts from
     the iBFT header) and OEM_TABLE_ID (also whatever it extracts from
     the iBFT header).  This is to help NIC drivers to figure out during
     bootup how to deal with BIOS created iBFT tables (like by TianoCore
     UEFI implemenation)"

* 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  ibft: Expose iBFT acpi header via sysfs
  iscsi_ibft: Add prefix-len attr and display netmask
2016-05-18 15:30:04 -07:00
Linus Torvalds 4a5219edcd ARM: SoC driver updates for v4.7
Driver updates for ARM SoCs, these contain various things that touch
 the drivers/ directory but got merged through arm-soc for practical
 reasons. For the most part, this is now related to power management
 controllers, which have not yet been abstracted into a separate
 subsystem, and typically require some code in drivers/soc or arch/arm
 to control the power domains.
 
 Another large chunk here is a rework of the NVIDIA Tegra USB3.0
 support, which was surprisingly tricky and took a long time to
 get done.
 
 Finally, reset controller handling as always gets merged through here
 as well.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXkGCrR//JCVInAQKb5BAAv2HuJ/tDjC8nNfYi0/aIt4uaRfRWE84t
 +nIpdKl/pB9AQo+HdG9WNihHs2GN44PdQRrDZ1enQX8nvTzc+dUl0AI1GZmUDpF/
 zCV2UJ39HMZcEPwf8lZk9X/JP4VOkJDM5pDgNZnnqdvkq0oqtKzmh0Kt6m2g6fIS
 LR3FVtCRxJDeT+pT+EpoN4jpW0cb3mjTWbn/a8Ar3BH07KBA3U22MVJhHArLjS30
 /aXP+AkgdvlgmBher5z44N6Qd/KOLn78rnE4LCRC4FwSCqA+qqPJQNGNblV5MHjE
 s5CYTqlihqLiGapqJ4zGBhmqj0XU/3kFVboGqYlTGjzMkOFgjddTpMdfkBUoG5oJ
 UubJ51zzSLXTcMwILGNXVls4YjJRKwNH7jeSjuMqpWrAYP4qBcMn/HQ1GqUjkNv+
 yWkheHiLDYgYkIDOBDuFUtJ7OXiVumGGxIE+r2K/sXeNI7gFcDxFExMIo11vPAWP
 WJ8ydTchyb/RUQbzhjEXhoIeCZwXQfe9s11qsyFQDCZLleWYQGs3gFKdEI1E7+BE
 oe018BSP+uaVXdaV18Ne4smwzydLAU9/ieUoO45PAUSN2reV4lWhFTlNiiiMd3Id
 IWoYwpxqP2VW9zJvLz6QGF/P+3cZ00m/1lecJCKHHPBmbUijCHWJmgLT73AdSXmR
 YIJ2UM5QMiY=
 =x+iD
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons.

  For the most part, this is now related to power management
  controllers, which have not yet been abstracted into a separate
  subsystem, and typically require some code in drivers/soc or arch/arm
  to control the power domains.

  Another large chunk here is a rework of the NVIDIA Tegra USB3.0
  support, which was surprisingly tricky and took a long time to get
  done.

  Finally, reset controller handling as always gets merged through here
  as well"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  arm-ccn: Enable building as module
  soc/tegra: pmc: Add generic PM domain support
  usb: xhci: tegra: Add Tegra210 support
  usb: xhci: Add NVIDIA Tegra XUSB controller driver
  dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
  dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
  PCI: tegra: Support per-lane PHYs
  dt-bindings: pci: tegra: Update for per-lane PHYs
  phy: tegra: Add Tegra210 support
  phy: Add Tegra XUSB pad controller support
  dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
  dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
  phy: core: Allow children node to be overridden
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
  drivers: firmware: psci: make two helper functions inline
  soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
  soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
  soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
  ...
2016-05-18 13:14:02 -07:00
Linus Torvalds d57d394319 Power management material for v4.7-rc1
- New cpufreq "schedutil" governor (making decisions based on CPU
    utilization information provided by the scheduler and capable of
    switching CPU frequencies right away if the underlying driver
    supports that) and support for fast frequency switching in the
    acpi-cpufreq driver (Rafael Wysocki).
 
  - Consolidation of CPU frequency management on ARM platforms allowing
    them to get rid of some platform-specific boilerplate code if they
    are going to use the cpufreq-dt driver (Viresh Kumar, Finley Xiao,
    Marc Gonzalez).
 
  - Support for ACPI _PPC and CPU frequency limits in the intel_pstate
    driver (Srinivas Pandruvada).
 
  - Fixes and cleanups in the cpufreq core and generic governor code
    (Rafael Wysocki, Sai Gurrappadi).
 
  - intel_pstate driver optimizations and cleanups (Rafael Wysocki,
    Philippe Longepe, Chen Yu, Joe Perches).
 
  - cpufreq powernv driver fixes and cleanups (Akshay Adiga, Shilpasri
    Bhat).
 
  - cpufreq qoriq driver fixes and cleanups (Jia Hongtao).
 
  - ACPI cpufreq driver cleanups (Viresh Kumar).
 
  - Assorted cpufreq driver updates (Ashwin Chaugule, Geliang Tang,
    Javier Martinez Canillas, Paul Gortmaker, Sudeep Holla).
 
  - Assorted cpufreq fixes and cleanups (Joe Perches, Arnd Bergmann).
 
  - Fixes and cleanups in the OPP (Operating Performance Points)
    framework, mostly related to OPP sharing, and reorganization of
    OF-dependent code in it (Viresh Kumar, Arnd Bergmann, Sudeep Holla).
 
  - New "passive" governor for devfreq (for SoC subsystems that will
    rely on someone else for the management of their power resources)
    and consolidation of devfreq support for Exynos platforms, coding
    style and typo fixes for devfreq (Chanwoo Choi, MyungJoo Ham).
 
  - PM core fixes and cleanups, mostly to make it work better with the
    generic power domains (genpd) framework, and updates for that
    framework (Ulf Hansson, Thierry Reding, Colin Ian King).
 
  - Intel Broxton support for the intel_idle driver (Len Brown).
 
  - cpuidle core optimization and fix (Daniel Lezcano, Dave Gerlach).
 
  - ARM cpuidle cleanups (Jisheng Zhang).
 
  - Intel Kabylake support for the RAPL power capping driver (Jacob Pan).
 
  - AVS (Adaptive Voltage Switching) rockchip-io driver update (Heiko
    Stuebner).
 
  - Updates for the cpupower tool (Arjun Sreedharan, Colin Ian King,
    Mattia Dongili, Thomas Renninger).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXOjLgAAoJEILEb/54YlRxfn0P/RbSPpNlUNBIE8DFrdD9jRdJ
 TIpZ7uiHi9tU1ZF17UBbb/SwuWfYVnVmiorZGRfFOtGaoqh0HFZ/nplDz99rK0ku
 vW2OnbojMQEUMU3IcUT1y4BsSl0H23f7ZOKrdprALeWxDQmbgnYjrE6vkX6hRtld
 A8eeZvIEJ5CzV8S+9aOOOpojW2yXk5dYGdZ7gpQdoM0n7zVLyPnNucJoha3BYmOG
 FwKEIe05RpIhfLfGT0CXIRcOzwAZ6ZWKgOrXUrx/AadPbvu/TP9zkI0djYI8ukyv
 z2oiO/GExoeGVuUzvy8vY5SiH4NQvViftFzMZepcsmjxmVglohMPRL8VLjZIBckk
 DDcqH9e0OQI20jjYT1vIf5+JWBvLxuQfGtyzI0S+sE/elB1zI/3O8p+8N2CuF5n+
 my2dawIewnHI/0AdSpJ+K7DVrfwPHAX19axtPX3dJSLh2OuHCPNlAtbxRGAriBfH
 Zv9NETxlrch69o2AD4K54DErWV1FsYLznzK5Zms6MC2Ispbb+oiYpacTlZblznvb
 H5U2SSNlA5Niir3vVJ01nKRtzxlWoi67CQxbYrGhlaR0nTTxf9HqWgcSiTZrn7Pv
 hs+LA2aUfMf3JGjStdORS7S8biQSid5vypfkglpWLZBKHNC9BqqZd9gSM+jF3FVh
 ps4mMM4UXY4hnoFDkMBI
 =WM89
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The majority of changes go into the cpufreq subsystem this time.

  To me, quite obviously, the biggest ticket item is the new "schedutil"
  governor.  Interestingly enough, it's the first new cpufreq governor
  since the beginning of the git era (except for some out-of-the-tree
  ones).

  There are two main differences between it and the existing governors.
  First, it uses the information provided by the scheduler directly for
  making its decisions, so it doesn't have to track anything by itself.
  Second, it can invoke drivers (supporting that feature) to adjust CPU
  performance right away without having to spawn work items to be
  executed in process context or similar.  Currently, the acpi-cpufreq
  driver is the only one supporting that mode of operation, but then it
  is used on a large number of systems.

  The "schedutil" governor as included here is very simple and mostly
  regarded as a foundation for future work on the integration of the
  scheduler with CPU power management (in fact, there is work in
  progress on top of it already).  Nevertheless it works and the
  preliminary results obtained with it are encouraging.

  There also is some consolidation of CPU frequency management for ARM
  platforms that can add their machine IDs the the new stub dt-platdev
  driver now and that will take care of creating the requisite platform
  device for cpufreq-dt, so it is not necessary to do that in platform
  code any more.  Several ARM platforms are switched over to using this
  generic mechanism.

  In addition to that, the intel_pstate driver is now going to respect
  CPU frequency limits set by the platform firmware (or a BMC) and
  provided via the ACPI _PPC object.

  The devfreq subsystem is getting a new "passive" governor for SoCs
  subsystems that will depend on somebody else to manage their voltage
  rails and its support for Samsung Exynos SoCs is consolidated.

  The rest is support for new hardware (Intel Broxton support in
  intel_idle for one example), bug fixes, optimizations and cleanups in
  a number of places.

  Specifics:

   - New cpufreq "schedutil" governor (making decisions based on CPU
     utilization information provided by the scheduler and capable of
     switching CPU frequencies right away if the underlying driver
     supports that) and support for fast frequency switching in the
     acpi-cpufreq driver (Rafael Wysocki)

   - Consolidation of CPU frequency management on ARM platforms allowing
     them to get rid of some platform-specific boilerplate code if they
     are going to use the cpufreq-dt driver (Viresh Kumar, Finley Xiao,
     Marc Gonzalez)

   - Support for ACPI _PPC and CPU frequency limits in the intel_pstate
     driver (Srinivas Pandruvada)

   - Fixes and cleanups in the cpufreq core and generic governor code
     (Rafael Wysocki, Sai Gurrappadi)

   - intel_pstate driver optimizations and cleanups (Rafael Wysocki,
     Philippe Longepe, Chen Yu, Joe Perches)

   - cpufreq powernv driver fixes and cleanups (Akshay Adiga, Shilpasri
     Bhat)

   - cpufreq qoriq driver fixes and cleanups (Jia Hongtao)

   - ACPI cpufreq driver cleanups (Viresh Kumar)

   - Assorted cpufreq driver updates (Ashwin Chaugule, Geliang Tang,
     Javier Martinez Canillas, Paul Gortmaker, Sudeep Holla)

   - Assorted cpufreq fixes and cleanups (Joe Perches, Arnd Bergmann)

   - Fixes and cleanups in the OPP (Operating Performance Points)
     framework, mostly related to OPP sharing, and reorganization of
     OF-dependent code in it (Viresh Kumar, Arnd Bergmann, Sudeep Holla)

   - New "passive" governor for devfreq (for SoC subsystems that will
     rely on someone else for the management of their power resources)
     and consolidation of devfreq support for Exynos platforms, coding
     style and typo fixes for devfreq (Chanwoo Choi, MyungJoo Ham)

   - PM core fixes and cleanups, mostly to make it work better with the
     generic power domains (genpd) framework, and updates for that
     framework (Ulf Hansson, Thierry Reding, Colin Ian King)

   - Intel Broxton support for the intel_idle driver (Len Brown)

   - cpuidle core optimization and fix (Daniel Lezcano, Dave Gerlach)

   - ARM cpuidle cleanups (Jisheng Zhang)

   - Intel Kabylake support for the RAPL power capping driver (Jacob
     Pan)

   - AVS (Adaptive Voltage Switching) rockchip-io driver update (Heiko
     Stuebner)

   - Updates for the cpupower tool (Arjun Sreedharan, Colin Ian King,
     Mattia Dongili, Thomas Renninger)"

* tag 'pm-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (112 commits)
  intel_pstate: Clean up get_target_pstate_use_performance()
  intel_pstate: Use sample.core_avg_perf in get_avg_pstate()
  intel_pstate: Clarify average performance computation
  intel_pstate: Avoid unnecessary synchronize_sched() during initialization
  cpufreq: schedutil: Make default depend on CONFIG_SMP
  cpufreq: powernv: del_timer_sync when global and local pstate are equal
  cpufreq: powernv: Move smp_call_function_any() out of irq safe block
  intel_pstate: Clean up intel_pstate_get()
  cpufreq: schedutil: Make it depend on CONFIG_SMP
  cpufreq: governor: Fix handling of special cases in dbs_update()
  PM / OPP: Move CONFIG_OF dependent code in a separate file
  cpufreq: intel_pstate: Ignore _PPC processing under HWP
  cpufreq: arm_big_little: use generic OPP functions for {init, free}_opp_table
  PM / OPP: add non-OF versions of dev_pm_opp_{cpumask_, }remove_table
  cpufreq: tango: Use generic platdev driver
  PM / OPP: pass cpumask by reference
  cpufreq: Fix GOV_LIMITS handling for the userspace governor
  cpupower: fix potential memory leak
  PM / devfreq: style/typo fixes
  PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
  ..
2016-05-16 19:17:22 -07:00
Linus Torvalds be092017b6 arm64 updates for 4.7:
- virt_to_page/page_address optimisations
 
 - Support for NUMA systems described using device-tree
 
 - Support for hibernate/suspend-to-disk
 
 - Proper support for maxcpus= command line parameter
 
 - Detection and graceful handling of AArch64-only CPUs
 
 - Miscellaneous cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJXNbgkAAoJELescNyEwWM0PtcIAK11xaOMmSqXz8fcTeNLw4dS
 taaPWhjCYus8EhJyvTetfwk74+qVApdvKXKNKgODJXQEjeQx2brdUfbQZb31DTGT
 798UYCAyEYCWkXspqi+/dpZEgUGPYH7uGOu2eDd19+PhTeX/EQSRX3fC9k0BNhvh
 PN9pOgRcKAlIExZ6QYmT0g56VLtbCfFShN41mQ8HdpShl6pPJuhQ+kDDzudmRjuD
 11/oYuOaVTnwbPuXn+sjOrWvMkfINHI70BAQnnBs0v+5c45mzpqEMsy0dYo2Pl2m
 ar5lUFVIZggQkiqcOzqBzEgF+4gNw4LUu1DgK6cNKNMtL6k8E9zeOZMWeSVr0lg=
 =bT5E
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:

 - virt_to_page/page_address optimisations

 - support for NUMA systems described using device-tree

 - support for hibernate/suspend-to-disk

 - proper support for maxcpus= command line parameter

 - detection and graceful handling of AArch64-only CPUs

 - miscellaneous cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  arm64: do not enforce strict 16 byte alignment to stack pointer
  arm64: kernel: Fix incorrect brk randomization
  arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str
  arm64: secondary_start_kernel: Remove unnecessary barrier
  arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
  arm64: Replace hard-coded values in the pmd/pud_bad() macros
  arm64: Implement pmdp_set_access_flags() for hardware AF/DBM
  arm64: Fix typo in the pmdp_huge_get_and_clear() definition
  arm64: mm: remove unnecessary EXPORT_SYMBOL_GPL
  arm64: always use STRICT_MM_TYPECHECKS
  arm64: kvm: Fix kvm teardown for systems using the extended idmap
  arm64: kaslr: increase randomization granularity
  arm64: kconfig: drop CONFIG_RTC_LIB dependency
  arm64: make ARCH_SUPPORTS_DEBUG_PAGEALLOC depend on !HIBERNATION
  arm64: hibernate: Refuse to hibernate if the boot cpu is offline
  arm64: kernel: Add support for hibernate/suspend-to-disk
  PM / Hibernate: Call flush_icache_range() on pages restored in-place
  arm64: Add new asm macro copy_page
  arm64: Promote KERNEL_START/KERNEL_END definitions to a header file
  arm64: kernel: Include _AC definition in page.h
  ...
2016-05-16 17:17:24 -07:00
David Bond b3c8eb5038 ibft: Expose iBFT acpi header via sysfs
Some ethernet adapter vendors are supplying products which support optional
(payed license) features. On some adapters this includes a hardware iscsi
initiator.  The same adapters in a normal (no extra licenses) mode of
operation can be used as a software iscsi initiator.  In addition, software
iscsi boot initiators are becoming a standard part of many vendors uefi
implementations.  This is creating difficulties during early boot/install
determining the proper configuration method for these adapters when they
are used as a boot device.

The attached patch creates sysfs entries to expose information from the
acpi header of the ibft table.  This information allows for a method to
easily determining if an ibft table was created by a ethernet card's
firmware or the system uefi/bios.  In the case of a hardware initiator this
information in combination with the pci vendor and device id can be used
to ascertain any vendor specific behaviors that need to be accommodated.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: David Bond <dbond@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-05-16 11:14:29 -04:00
Hannes Reinecke 9a99425f07 iscsi_ibft: Add prefix-len attr and display netmask
The iBFT table only specifies a prefix length, not a netmask.
And the netmask is pretty much pointless for IPv6.
So introduce a new attribute 'prefix-len'.

Some older user-space code might rely on the netmask attribute
being present, so we should always display it.

Changes from v1:
 - Combined two patches into one

Changes from v2:
 - Cleaned up/corrected wording for patch description

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2016-05-16 11:14:23 -04:00
Rafael J. Wysocki acc53b49b1 Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle: Replace ktime_get() with local_clock()
  drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
  soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
  ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
  ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
  intel_idle: add BXT support
  cpuidle: Indicate when a device has been unregistered
2016-05-16 14:31:03 +02:00
Rafał Miłecki 2ab71a02c5 MIPS: BCM47xx: Move SPROM driver to drivers/firmware/
Broadcom ARM home routers store SPROM content in NVRAM just like MIPS
ones. To share SPROM code we need to move it out of arch/mips/ to some
common place. We already have bcm47xx_nvram in firmware path and SPROM
should fit there as well.
This driver is responsible for parsing SoC configuration data into a
struct shared between ssb and bcma buses.
This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0
(ARCH_BCM_5301X).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 14:01:43 +02:00
Julia Lawall 1cfd63166c efi: Merge boolean flag arguments
The parameters atomic and duplicates of efivar_init always have opposite
values.  Drop the parameter atomic, replace the uses of !atomic with
duplicates, and update the call sites accordingly.

The code using duplicates is slightly reorganized with an 'else', to avoid
duplicating the lock code.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Saurabh Sengar <saurabh.truth@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462570771-13324-5-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-07 07:06:13 +02:00
Matt Fleming fb7a84cac0 efi/capsule: Move 'capsule' to the stack in efi_capsule_supported()
Dan Carpenter reports that passing the address of the pointer to the
kmalloc()'d memory for 'capsule' is dangerous:

 "drivers/firmware/efi/capsule.c:109 efi_capsule_supported()
  warn: did you mean to pass the address of 'capsule'

   108
   109          status = efi.query_capsule_caps(&capsule, 1, &max_size, reset);
                                                ^^^^^^^^
  If we modify capsule inside this function call then at the end of the
  function we aren't freeing the original pointer that we allocated."

Ard Biesheuvel noted that we don't even need to call kmalloc() since the
object we allocate isn't very big and doesn't need to persist after the
function returns.

Place 'capsule' on the stack instead.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462570771-13324-4-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-07 07:06:13 +02:00
Jeremy Compostella 2e121d711a efibc: Fix excessive stack footprint warning
GCC complains about a newly added file for the EFI Bootloader Control:

  drivers/firmware/efi/efibc.c: In function 'efibc_set_variable':
  drivers/firmware/efi/efibc.c:53:1: error: the frame size of 2272 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The problem is the declaration of a local variable of type struct
efivar_entry, which is by itself larger than the warning limit of 1024
bytes.

Use dynamic memory allocation instead of stack memory for the entry
object.

This patch also fixes a potential buffer overflow.

Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
[ Updated changelog to include GCC error ]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462570771-13324-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-07 07:06:13 +02:00
Matt Fleming 62075e5818 efi/capsule: Make efi_capsule_pending() lockless
Taking a mutex in the reboot path is bogus because we cannot sleep
with interrupts disabled, such as when rebooting due to panic(),

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97
  in_atomic(): 0, irqs_disabled(): 1, pid: 7, name: rcu_sched
  Call Trace:
    dump_stack+0x63/0x89
    ___might_sleep+0xd8/0x120
    __might_sleep+0x49/0x80
    mutex_lock+0x20/0x50
    efi_capsule_pending+0x1d/0x60
    native_machine_emergency_restart+0x59/0x280
    machine_emergency_restart+0x19/0x20
    emergency_restart+0x18/0x20
    panic+0x1ba/0x217

In this case all other CPUs will have been stopped by the time we
execute the platform reboot code, so 'capsule_pending' cannot change
under our feet. We wouldn't care even if it could since we cannot wait
for it complete.

Also, instead of relying on the external 'system_state' variable just
use a reboot notifier, so we can set 'stop_capsules' while holding
'capsule_mutex', thereby avoiding a race where system_state is updated
while we're in the middle of efi_capsule_update_locked() (since CPUs
won't have been stopped at that point).

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462570771-13324-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-07 07:06:13 +02:00
Ingo Molnar 35dc9ec107 Merge branch 'linus' into efi/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-07 07:00:07 +02:00
Linus Torvalds 3cedbec301 virtio/qemu: fixes for 4.6
A couple of fixes for virtio and for the new QEMU fw cfg driver.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXJfuWAAoJECgfDbjSjVRpRdwH/RQjAQnqTuLAI/mn/kbinK24
 EoDubbWKq+KVDDwoc3tkWRNBoyXDUIYLHrrJNhLtrXNULTGtIejqJdBnD1THuiZ2
 GGWzDiB86qtU1uXSEaXSBFpLi0YYP26bcQ8hjnDhSUWqESE2AC63NO0E0plyu2NI
 oPIiWLN3gJovr12vVURbYcrXxZ1zykd/8E80jj/Gus81XrbKXsn8Wmq1cSrtD/DC
 S07pWbF43YRl3pWyezQW8D4RowF1f9x8CSzrcvqt3qw5d0+jqtcKz0iR0vsi3wIy
 poAadEn+91Xi2kVZUm9bCB30+7A+iqGnFIG7x29xrdZl+2rbvquwRiNlvX4RM4g=
 =GoGi
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio/qemu fixes from Michael Tsirkin:
 "A couple of fixes for virtio and for the new QEMU fw cfg driver"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: Silence uninitialized variable warning
  firmware: qemu_fw_cfg.c: potential unintialized variable
2016-05-05 08:26:54 -07:00
Linus Torvalds 8f3603a210 Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ingo Molnar:
 "This fixes a bug in the efivars code"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix out-of-bounds read in variable_matches()
2016-04-28 19:54:50 -07:00
Ard Biesheuvel 6f26b36711 arm64: kaslr: increase randomization granularity
Currently, our KASLR implementation randomizes the placement of the core
kernel at 2 MB granularity. This is based on the arm64 kernel boot
protocol, which mandates that the kernel is loaded TEXT_OFFSET bytes above
a 2 MB aligned base address. This requirement is a result of the fact that
the block size used by the early mapping code may be 2 MB at the most (for
a 4 KB granule kernel)

But we can do better than that: since a KASLR kernel needs to be relocated
in any case, we can tolerate a physical misalignment as long as the virtual
misalignment relative to this 2 MB block size is equal in size, and code to
deal with this is already in place.

Since we align the kernel segments to 64 KB, let's randomize the physical
offset at 64 KB granularity as well (unless CONFIG_DEBUG_ALIGN_RODATA is
enabled). This way, the page table and TLB footprint is not affected.

The higher granularity allows for 5 bits of additional entropy to be used.

Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-28 19:44:15 +01:00
Mark Rutland 0cf0223c83 efi/runtime-wrappers: Remove ARCH_EFI_IRQ_FLAGS_MASK #ifdef
Now that arm, arm64, and x86 all provide ARCH_EFI_IRQ_FLAGS_MASK, we can
get rid of the trivial and now unused implementation of
efi_call_virt_check_flags().

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-41-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:13 +02:00
Mark Rutland 1d04ba1796 efi/runtime-wrappers: Detect firmware IRQ flag corruption
The UEFI spec allows runtime services to be called with interrupts
masked or unmasked, and if a runtime service function needs to mask
interrupts, it must restore the mask to its original state before
returning (i.e. from the PoV of the OS, this does not change across a
call). Firmware should never unmask exceptions, as these may then be
taken by the OS unexpectedly.

Unfortunately, some firmware has been seen to unmask IRQs (and
potentially other maskable exceptions) across runtime services calls,
leaving IRQ flags corrupted after returning from a runtime services
function call. This may be detected by the IRQ tracing code, but often
goes unnoticed, leaving a potentially disastrous bug hidden.

This patch detects when the IRQ flags are corrupted by an EFI runtime
services call, logging the call and specific corruption to the console.
While restoring the expected value of the flags is insufficient to avoid
problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ
tracing).

The set of bits in flags which we want to check is architecture-specific
(e.g. we want to check FIQ on arm64, but not the zero flag on x86), so
each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the
absence of this mask, the check is a no-op, and we redundantly save the
flags twice, but that will be short-lived as subsequent patches
will implement this and remove the scaffolding.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:11 +02:00
Mark Rutland d9c6e1d0fa efi/runtime-wrappers: Remove redundant #ifdefs
Now that all users of the EFI runtime wrappers (arm,arm64,x86) have been
migrated to the new setup/teardown macros, we don't need to support
overridden {__,}efi_call_virt() implementations.

This patch removes the unnecessary #ifdefs.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-36-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:10 +02:00
Mark Rutland f51c35f291 efi/runtime-wrappers: Add {__,}efi_call_virt() templates
Currently each architecture must implement two macros, efi_call_virt() and
__efi_call_virt(), which only differ by the presence or absence of a
return type. Otherwise, the logic surrounding the call is identical.

As each architecture must define the entire body of each, we can't place
any generic manipulation (e.g. irq flag validation) in the middle.

This patch adds template implementations of these macros. With these,
arch code can implement three template macros, avoiding reptition for
the void/non-void return cases:

* arch_efi_call_virt_setup()

  Sets up the environment for the call (e.g. switching page tables,
  allowing kernel-mode use of floating point, if required).

* arch_efi_call_virt()

  Performs the call. The last expression in the macro must be the call
  itself, allowing the logic to be shared by the void and non-void
  cases.

* arch_efi_call_virt_teardown()

  Restores the usual kernel environment once the call has returned.

While the savings from repition are minimal, we additionally gain the
ability to add common code around the call with the call environment set
up. This can be used to detect common firmware issues (e.g. bad irq mask
management).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-32-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:06 +02:00
Ard Biesheuvel 249f763216 efi/arm-init: Reserve rather than unmap the memory map for ARM as well
Now that ARM has a fully functional memremap() implementation, there is
no longer a need to remove the UEFI memory map from the linear mapping
in order to be able to create a permanent mapping for it using generic
code.

So remove the 'IS_ENABLED(CONFIG_ARM)' conditional we added in:

7cc8cbcf82 ("efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping")

... and revert to using memblock_reserve() for both ARM and arm64.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-31-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:05 +02:00
Kweh, Hock Leong 65117f1aa1 efi: Add misc char driver interface to update EFI firmware
This patch introduces a kernel module to expose a capsule loader
interface (misc char device file note) for users to upload capsule
binaries.

Example:

  cat firmware.bin > /dev/efi_capsule_loader

Any upload error will be returned while doing "cat" through file
operation write() function call.

Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
[ Update comments and Kconfig text ]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-30-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:05 +02:00
Matt Fleming f0133f3c5b efi: Add 'capsule' update support
The EFI capsule mechanism allows data blobs to be passed to the EFI
firmware. A common use case is performing firmware updates. This patch
just introduces the main infrastructure for interacting with the
firmware, and a driver that allows users to upload capsules will come
in a later patch.

Once a capsule has been passed to the firmware, the next reboot must
be performed using the ResetSystem() EFI runtime service, which may
involve overriding the reboot type specified by reboot=. This ensures
the reset value returned by QueryCapsuleCapabilities() is used to
reset the system, which is required for the capsule to be processed.
efi_capsule_pending() is provided for this purpose.

At the moment we only allow a single capsule blob to be sent to the
firmware despite the fact that UpdateCapsule() takes a 'CapsuleCount'
parameter. This simplifies the API and shouldn't result in any
downside since it is still possible to send multiple capsules by
repeatedly calling UpdateCapsule().

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-28-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:03 +02:00
Matt Fleming 806b0351c9 efi: Move efi_status_to_err() to drivers/firmware/efi/
Move efi_status_to_err() to the architecture independent code as it's
generally useful in all bits of EFI code where there is a need to
convert an efi_status_t to a kernel error value.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-27-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:03 +02:00
Compostella, Jeremy 06f7d4a161 efibc: Add EFI Bootloader Control module
This module installs a reboot callback, such that if reboot() is invoked
with a string argument NNN, "NNN" is copied to the "LoaderEntryOneShot"
EFI variable, to be read by the bootloader.

If the string matches one of the boot labels defined in its configuration,
the bootloader will boot once to that label.  The "LoaderEntryRebootReason"
EFI variable is set with the reboot reason: "reboot", "shutdown".

The bootloader reads this reboot reason and takes particular action
according to its policy.

There are reboot implementations that do "reboot <reason>", such as
Android's reboot command and Upstart's reboot replacement, which pass
the reason as an argument to the reboot syscall.  There is no
platform-agnostic way how those could be modified to pass the reason
to the bootloader, regardless of platform or bootloader.

Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stefan Stanacar <stefan.stanacar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-26-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:02 +02:00
Ard Biesheuvel e3271c96ca efi/arm*: Wire up 'struct screen_info' to efi-framebuffer platform device
This adds code to the ARM and arm64 EFI init routines to expose a platform
device of type 'efi-framebuffer' if 'struct screen_info' has been populated
appropriately from the GOP protocol by the stub. Since the framebuffer may
potentially be located in system RAM, make sure that the region is reserved
and marked MEMBLOCK_NOMAP.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-24-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:01 +02:00
Ard Biesheuvel f0827e18a7 efi/arm*/libstub: Wire up GOP protocol to 'struct screen_info'
This adds the code to the ARM and arm64 versions of the UEFI stub to
populate struct screen_info based on the information received from the
firmware via the GOP protocol.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-23-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:00 +02:00
Ard Biesheuvel 801820bee9 efi/arm/libstub: Make screen_info accessible to the UEFI stub
In order to hand over the framebuffer described by the GOP protocol and
discovered by the UEFI stub, make struct screen_info accessible by the
stub. This involves allocating a loader data buffer and passing it to the
kernel proper via a UEFI Configuration Table, since the UEFI stub executes
in the context of the decompressor, and cannot access the kernel's copy of
struct screen_info directly.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-22-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:59 +02:00
Ard Biesheuvel fc37206427 efi/libstub: Move Graphics Output Protocol handling to generic code
The Graphics Output Protocol code executes in the stub, so create a generic
version based on the x86 version in libstub so that we can move other archs
to it in subsequent patches. The new source file gop.c is added to the
libstub build for all architectures, but only wired up for x86.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-18-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:57 +02:00
Ard Biesheuvel 789957ef72 efi/arm*: Take the Memory Attributes table into account
Call into the generic memory attributes table support code at the
appropriate times during the init sequence so that the UEFI Runtime
Services region are mapped according to the strict permissions it
specifies.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-15-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:55 +02:00
Ard Biesheuvel 10f0d2f577 efi: Implement generic support for the Memory Attributes table
This implements shared support for discovering the presence of the
Memory Attributes table, and for parsing and validating its contents.

The table is validated against the construction rules in the UEFI spec.
Since this is a new table, it makes sense to complain if we encounter
a table that does not follow those rules.

The parsing and validation routine takes a callback that can be specified
per architecture, that gets passed each unique validated region, with the
virtual address retrieved from the ordinary memory map.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ Trim pr_*() strings to 80 cols and use EFI consistently. ]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-14-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:54 +02:00
Ard Biesheuvel a604af075a efi: Add support for the EFI_MEMORY_ATTRIBUTES_TABLE config table
This declares the GUID and struct typedef for the new memory attributes
table which contains the permissions that can be used to apply stricter
permissions to UEFI Runtime Services memory regions.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-13-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:54 +02:00
Ard Biesheuvel 24d45d1dc2 efi/arm*: Use memremap() to create the persistent memmap mapping
Instead of using ioremap_cache(), which is slightly inappropriate for
mapping firmware tables, and is not even allowed on ARM for mapping
regions that are covered by a struct page, use memremap(), which was
invented for this purpose, and will also reuse the existing kernel
direct mapping if the requested region is covered by it.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-10-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:52 +02:00
Ard Biesheuvel 0d054ad96e efi: Check EFI_MEMORY_DESCRIPTOR version explicitly
Our efi_memory_desc_t type is based on EFI_MEMORY_DESCRIPTOR version 1 in
the UEFI spec. No version updates are expected, but since we are about to
introduce support for new firmware tables that use the same descriptor
type, it makes sense to at least warn if we encounter other versions.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-9-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:51 +02:00
Matt Fleming 884f4f66ff efi: Remove global 'memmap' EFI memory map
Abolish the poorly named EFI memory map, 'memmap'. It is shadowed by a
bunch of local definitions in various files and having two ways to
access the EFI memory map ('efi.memmap' vs. 'memmap') is rather
confusing.

Furthermore, IA64 doesn't even provide this global object, which has
caused issues when trying to write generic EFI memmap code.

Replace all occurrences with efi.memmap, and convert the remaining
iterator code to use for_each_efi_mem_desc().

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Luck, Tony <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-8-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:51 +02:00
Matt Fleming 78ce248faa efi: Iterate over efi.memmap in for_each_efi_memory_desc()
Most of the users of for_each_efi_memory_desc() are equally happy
iterating over the EFI memory map in efi.memmap instead of 'memmap',
since the former is usually a pointer to the latter.

For those users that want to specify an EFI memory map other than
efi.memmap, that can be done using for_each_efi_memory_desc_in_map().
One such example is in the libstub code where the firmware is queried
directly for the memory map, it gets iterated over, and then freed.

This change goes part of the way toward deleting the global 'memmap'
variable, which is not universally available on all architectures
(notably IA64) and is rather poorly named.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-7-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:50 +02:00
Linn Crosetto 30d7bf034c efi/arm64: Check SetupMode when determining Secure Boot status
According to the UEFI specification (version 2.5 Errata A, page 87):

    The platform firmware is operating in secure boot mode if the value of
    the SetupMode variable is 0 and the SecureBoot variable is set to 1. A
    platform cannot operate in secure boot mode if the SetupMode variable
    is set to 1.

Check the value of the SetupMode variable when determining the state of
Secure Boot.

Plus also do minor cleanup, change sizeof() use to match kernel style guidelines.

Signed-off-by: Linn Crosetto <linn@hpe.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-6-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:49 +02:00
Linn Crosetto 73a6492589 efi/arm64: Report unexpected errors when determining Secure Boot status
Certain code in the boot path may require the ability to determine whether
UEFI Secure Boot is definitely enabled, for example printing status to the
console. Other code may need to know when UEFI Secure Boot is definitely
disabled, for example restricting use of kernel parameters.

If an unexpected error is returned from GetVariable() when querying the
status of UEFI Secure Boot, return an error to the caller. This allows the
caller to determine the definite state, and to take appropriate action if
an expected error is returned.

Signed-off-by: Linn Crosetto <linn@hpe.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-5-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:48 +02:00
Ard Biesheuvel 14c43be601 efi/arm*: Drop writable mapping of the UEFI System table
Commit:

  2eec5dedf7 ("efi/arm-init: Use read-only early mappings")

updated the early ARM UEFI init code to create the temporary, early
mapping of the UEFI System table using read-only attributes, as a
hardening measure against inadvertent modification.

However, this still leaves the permanent, writable mapping of the UEFI
System table, which is only ever referenced during invocations of UEFI
Runtime Services, at which time the UEFI virtual mapping is available,
which also covers the system table. (This is guaranteed by the fact that
SetVirtualAddressMap(), which is a runtime service itself, converts
various entries in the table to their virtual equivalents, which implies
that the table must be covered by a RuntimeServicesData region that has
the EFI_MEMORY_RUNTIME attribute.)

So instead of creating this permanent mapping, record the virtual address
of the system table inside the UEFI virtual mapping, and dereference that
when accessing the table. This protects the contents of the system table
from inadvertent (or deliberate) modification when no UEFI Runtime
Services calls are in progress.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:47 +02:00
Ard Biesheuvel c5b591e96d efi: Get rid of the EFI_SYSTEM_TABLES status bit
The EFI_SYSTEM_TABLES status bit is set by all EFI supporting architectures
upon discovery of the EFI system table, but the bit is never tested in any
code we have in the tree. So remove it.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Luck, Tony <tony.luck@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:46 +02:00
Linus Torvalds 91ea692f87 Here are the latest bug fixes for ARM SoCs, mostly addressing
recent regressions. Changes are across several platforms, so
 I'm listing every change separately here.
 
 Regressions since 4.5:
 
  - A correction of the psci firmware DT binding, to prevent
    users from relying on unintended semantics
 
  - Actually getting the newly merged clock driver for some OMAP
    platforms to work
 
  - A revert of patches for the Qualcomm BAM, these need to be
    reworked for 4.7 to avoid breaking boards other than the one
    they were intended for
 
  - A correction for the I2C device nodes on the Socionext Uniphier
    platform
 
  - i.MX SDHCI was broken for non-DT platforms due to a change
    with the setting of the DMA mask
 
  - A revert of a patch that accidentally added a nonexisting
    clock on the Rensas "Porter" board
 
  - A couple of OMAP fixes that are all related to suspend after
    the power domain changes for dra7
 
  - On Mediatek, revert part of the power domain initialization
    changes that broke mt8173-evb
 
 Fixes for older bugs:
 
  - Workaround for an "external abort" in the omap34xx
    suspend/resume code.
 
  - The USB1/eSATA should not be listed as an excon device on
    am57xx-beagle-x15 (broken since v4.0)
 
  - A v4.5 regression in the TI AM33xx and AM43XX DT specifying
    incorrect DMA request lines for the GPMC
 
  - The jiffies calibration on Renesas platforms was incorrect
    for some modern CPU cores.
 
  - A hardware errata woraround for clockdomains on TI DRA7
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVx+5v2CrR//JCVInAQJ/ZBAArI3ZiR+Jj2dZCm9c7+PjlDWngJpBME3V
 o4aF9CeyuA/eyx+QtKAq1ScG2eRIbfab03XGBMEHXpKmmiTXYFIcLFHewwSGBYsy
 XUsNO+ZKsw92ImSdcX9p45BjkAADJvUwX5BzDlfOQ5mNX+o0Godb/8Mi2Y6RIqTK
 5C0xQ0YE8ZN7xtyNzFylaI+CL6wsVLy6PUKig7UIrOOXQK3Tzt4mEz2ksrSBJzON
 RiG7kPLf+Zd013WyF/ZUdC3VErDOP7C1Z+YRcK+2rxjlL+4oJUznsoaBYJgLUV+T
 GmcD0TZNwt6x6FWF6cSiUa+gl+6oWRZwTGfUooS1zEcuLHBsONdMtVat4Z01RYos
 rdMvFgZ6bxG7n4tajI2jg1gokGfyMfYuKwnHuA8Ynzn4N/VcnnbfxPRyV/RMLN0W
 ad/e12SlLMX1XahrD9uo/oH/X73gHPnbHlLLzWfDfnyvNGvWiW3SNklFT03q/Yn+
 fgfB0OnzG8+a3c/LHZbtAo/yYYLdqIuOg8I40AizN3CKHamUWPAjgFfdHdQADVV8
 yC5ugVB6x7RYID/49IPT1C3n/SjoypYyRbo30ipqyz2dTf6kz35SY/YjYNSaIYvY
 QfnGFuywsKsTprGAzI+x/fGo61Ve0/XkK9RPt0opU1+WdYr3sE+ufGVLVn4g4Cw3
 wfd20UTVwGs=
 =YgL2
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the latest bug fixes for ARM SoCs, mostly addressing recent
  regressions.  Changes are across several platforms, so I'm listing
  every change separately here.

  Regressions since 4.5:

   - A correction of the psci firmware DT binding, to prevent users from
     relying on unintended semantics

   - Actually getting the newly merged clock driver for some OMAP
     platforms to work

   - A revert of patches for the Qualcomm BAM, these need to be reworked
     for 4.7 to avoid breaking boards other than the one they were
     intended for

   - A correction for the I2C device nodes on the Socionext Uniphier
     platform

   - i.MX SDHCI was broken for non-DT platforms due to a change with the
     setting of the DMA mask

   - A revert of a patch that accidentally added a nonexisting clock on
     the Rensas "Porter" board

   - A couple of OMAP fixes that are all related to suspend after the
     power domain changes for dra7

   - On Mediatek, revert part of the power domain initialization changes
     that broke mt8173-evb

  Fixes for older bugs:

   - Workaround for an "external abort" in the omap34xx suspend/resume
     code.

   - The USB1/eSATA should not be listed as an excon device on
     am57xx-beagle-x15 (broken since v4.0)

   - A v4.5 regression in the TI AM33xx and AM43XX DT specifying
     incorrect DMA request lines for the GPMC

   - The jiffies calibration on Renesas platforms was incorrect for some
     modern CPU cores.

   - A hardware errata woraround for clockdomains on TI DRA7"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems
  arm64: dts: uniphier: fix I2C nodes of PH1-LD20
  ARM: shmobile: timer: Fix preset_lpj leading to too short delays
  Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"
  ARM: dts: r8a7791: Don't disable referenced optional clocks
  Revert "ARM: OMAP: Catch callers of revision information prior to it being populated"
  ARM: OMAP3: Fix external abort on 36xx waking from off mode idle
  ARM: dts: am57xx-beagle-x15: remove extcon_usb1
  ARM: dts: am437x: Fix GPMC dma properties
  ARM: dts: am33xx: Fix GPMC dma properties
  Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators"
  ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask
  ARM: DRA7: clockdomain: Implement timer workaround for errata i874
  ARM: OMAP: Catch callers of revision information prior to it being populated
  ARM: dts: dra7: Correct clock tree for sys_32k_ck
  ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap
  ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen
  Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node"
  Revert "dts: msm8974: Add blsp2_bam dma node"
  ARM: dts: Add clocks for dm814x ADPLL
2016-04-26 16:17:01 -07:00
Sudeep Holla 978fa43623 drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems
Currently ARM CPUs DT bindings allows different enable-method value for
PSCI based systems. On ARM 64-bit this property is required and must be
"psci" while on ARM 32-bit systems this property is optional and must
be "arm,psci" if present.

However, "arm,psci" has always been the compatible string for the PSCI
node, and was never intended to be the enable-method. So this is a bug
in the binding and not a deliberate attempt at specifying 32-bit
differently.

This is problematic if 32-bit OS is run on 64-bit system which has
"psci" as enable-method rather than the expected "arm,psci".

So let's unify the value into "psci" and remove support for "arm,psci"
before it finds any users.

Reported-by: Soby Mathew <Soby.Mathew@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-26 12:46:08 +02:00
Arnd Bergmann 2b9cf18982 drivers: firmware: psci: make two helper functions inline
The previous patch marked these two as 'static' which showed that they
are sometimes unused:

drivers/firmware/psci.c:103:13: error: 'psci_power_state_is_valid' defined but not used [-Werror=unused-function]
 static bool psci_power_state_is_valid(u32 state)
drivers/firmware/psci.c:94:13: error: 'psci_power_state_loses_context' defined but not used [-Werror=unused-function]
 static bool psci_power_state_loses_context(u32 state)

This also marks the functions 'inline', which has the main effect of
silently ignoring them when they are unused. The compiler will typically
inline small static functions anyway, so this seems more appropriate
than using __maybe_unused, which would have the same result otherwise.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 21e8868 ("drivers: firmware: psci: make two helper functions static")
2016-04-26 02:13:30 +02:00
Jisheng Zhang 21e8868e66 drivers: firmware: psci: make two helper functions static
psci_power_state_loses_context() and psci_power_state_is_valid are only
used internally now, so make them static.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25 23:47:44 +02:00
Jisheng Zhang 1d2d8de44a drivers: firmware: psci: drop duplicate const from psci_of_match
This is to fix below sparse warning:
drivers/firmware/psci.c:mmm:nn: warning: duplicate const

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25 23:47:36 +02:00
Laszlo Ersek 630ba0cc7a efi: Fix out-of-bounds read in variable_matches()
The variable_matches() function can currently read "var_name[len]", for
example when:

 - var_name[0] == 'a',
 - len == 1
 - match_name points to the NUL-terminated string "ab".

This function is supposed to accept "var_name" inputs that are not
NUL-terminated (hence the "len" parameter"). Document the function, and
access "var_name[*match]" only if "*match" is smaller than "len".

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Matthew Garrett <mjg59@coreos.com>
Cc: Jason Andryuk <jandryuk@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.10+
Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-04-22 19:41:41 +01:00
Dan Carpenter d4f6e272f2 firmware: qemu_fw_cfg.c: potential unintialized variable
It acpi_acquire_global_lock() return AE_NOT_CONFIGURED then "glk" isn't
initialized, which, if you got very unlucky, could cause a bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-21 16:12:36 +03:00