Commit Graph

7214 Commits

Author SHA1 Message Date
Jim Lodes 4bafcbc77f OMAPDSS: HDMI5: Change DDC timings
The DDC scl high and low times were set to the minimum values
from the i2c specification, but the i2c specification takes into
account the rise time and fall time to calculate the frequency.
To pass HDMI certification DDC can not exceed 100kHz therefore in
a system where the rise times and fall times are negligible the high
and low times for scl need to be 10us.

Signed-off-by: Jim Lodes <jim.lodes@garmin.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31 08:20:43 +03:00
Jim Lodes 08f707ac3e OMAPDSS: HDMI5: Fix AVI infoframe
The AVI infoframe R0-R3 in the 2nd data byte represents the
Active Format Aspect Ratio. It is four bits long not two bits.
This fixes that mask used to extract the bits before writing the
bits to the hardware registers.

Signed-off-by: Jim Lodes <jim.lodes@garmin.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31 08:20:42 +03:00
Arnd Bergmann 287980e49f remove lots of IS_ERR_VALUE abuses
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.

However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.

Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.

This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.

Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.

I was using this definition for testing:

 #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
       unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))

which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.

I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.

[ Updated the 9p parts as per Al Viro  - Linus ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 15:26:11 -07:00
Linus Torvalds ecc5fbd5ef pwm: Changes for v4.7-rc1
This set of changes introduces an atomic API to the PWM subsystem. This
 is influenced by the DRM atomic API that was introduced a while back,
 though it is obviously a lot simpler. The fundamental idea remains the
 same, though: drivers provide a single callback to implement the atomic
 configuration of a PWM channel.
 
 As a side-effect the PWM subsystem gains the ability for initial state
 retrieval, so that the logical state mirrors that of the hardware. Many
 use-cases don't care about this, but for others it is essential.
 
 These new features require changes in all users, which these patches
 take care of. The core is transitioned to use the atomic callback if
 available and provides a fallback mechanism for other drivers.
 
 Changes to transition users and drivers to the atomic API are postponed
 to v4.8.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXRcVWAAoJEN0jrNd/PrOhO3EP/RDuuco1fROml1ElCjcnWWfv
 3dPyKEJhZktMmRNd/V0zMUJiOwr77wlbX4oQ5HajMHNYFQ65jfihbbylhSDepnxg
 mjKV/yo18rzYZt9fv8huwvlwMOlLrJ9wQn4Gkbr5tzke6nITp52DTNH5y/anPQIk
 B7neA1TerodAbE9FWjYuBZIltkmYZDqdm//RCHXVyYym8VuotE+jf+nrMXI78FoL
 lgG64z/2OaGI+NZJQcpWftuz9nnenpa3sSLrvpitWEb/dAsXroMW/f08uVuOW87v
 0xk7N7zmEkef7izVOWiPOK/MxIdc8hI4A5JftzMJ7nbgJvwG78dJiOxgFhrJYx0z
 7zrYfjvvzjW0dpjZUvO37T/V5Rfxrk9sM7qUHJmN0+1oEkkCo1/c75JWTU2AmT4l
 qkJdOGhgv7LumIiwbEyxc/5Jyh1akKOUX2svO0+0dptLRX2UpN3yeKIYinG1dAuT
 86+/uuM6CL5gc+jVZ3GLNWfzHUu2RFVX0r0pzywq53pK5gMEs5WyxoIb5mHb8liA
 sHsrZ3wbGGn95yZo8CwkzXIUsUH7qKYK+UVWA6OVBoTq4AOBZtII1AqvUttl25qL
 xuKpj70xaBhK7VGqzDYQ68lqBaRySh+yzL/QsmnPEyx59mW81ytMrsn1Kmnuae2l
 bzUsnWrpHc6530fRggTD
 =sxT9
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes introduces an atomic API to the PWM subsystem.
  This is influenced by the DRM atomic API that was introduced a while
  back, though it is obviously a lot simpler.  The fundamental idea
  remains the same, though: drivers provide a single callback to
  implement the atomic configuration of a PWM channel.

  As a side-effect the PWM subsystem gains the ability for initial state
  retrieval, so that the logical state mirrors that of the hardware.
  Many use-cases don't care about this, but for others it is essential.

  These new features require changes in all users, which these patches
  take care of.  The core is transitioned to use the atomic callback if
  available and provides a fallback mechanism for other drivers.

  Changes to transition users and drivers to the atomic API are
  postponed to v4.8"

* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  pwm: Add information about polarity, duty cycle and period to debugfs
  pwm: Switch to the atomic API
  pwm: Update documentation
  pwm: Add core infrastructure to allow atomic updates
  pwm: Add hardware readout infrastructure
  pwm: Move the enabled/disabled info into pwm_state
  pwm: Introduce the pwm_state concept
  pwm: Keep PWM state in sync with hardware state
  ARM: Explicitly apply PWM config extracted from pwm_args
  drm: i915: Explicitly apply PWM config extracted from pwm_args
  input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
  input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
  backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
  backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
  backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
  backlight: pwm_bl: Use pwm_get_args() where appropriate
  fbdev: ssd1307fb: Use pwm_get_args() where appropriate
  regulator: pwm: Use pwm_get_args() where appropriate
  leds: pwm: Use pwm_get_args() where appropriate
  input: misc: max77693: Use pwm_get_args() where appropriate
  ...
2016-05-25 10:40:15 -07:00
Linus Torvalds 1d6da87a32 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...
2016-05-23 11:48:48 -07:00
Linus Torvalds 5af2344013 Char / Misc driver update for 4.7-rc1
Here's the big char and misc driver update for 4.7-rc1.
 
 Lots of different tiny driver subsystems have updates here with new
 drivers and functionality.  Details in the shortlog.
 
 All have been in linux-next with no reported issues for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0YYACgkQMUfUDdst+ynmtACeLpLLKZsy1v7WfkW92cLSOPBD
 2C8AoLFPKoh55rlOJrNz3bW9ANAaOloX
 =/nsL
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here's the big char and misc driver update for 4.7-rc1.

  Lots of different tiny driver subsystems have updates here with new
  drivers and functionality.  Details in the shortlog.

  All have been in linux-next with no reported issues for a while"

* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
  mcb: Delete num_cells variable which is not required
  mcb: Fixed bar number assignment for the gdd
  mcb: Replace ioremap and request_region with the devm version
  mcb: Implement bus->dev.release callback
  mcb: export bus information via sysfs
  mcb: Correctly initialize the bus's device
  mei: bus: call mei_cl_read_start under device lock
  coresight: etb10: adjust read pointer only when needed
  coresight: configuring ETF in FIFO mode when acting as link
  coresight: tmc: implementing TMC-ETF AUX space API
  coresight: moving struct cs_buffers to header file
  coresight: tmc: keep track of memory width
  coresight: tmc: make sysFS and Perf mode mutually exclusive
  coresight: tmc: dump system memory content only when needed
  coresight: tmc: adding mode of operation for link/sinks
  coresight: tmc: getting rid of multiple read access
  coresight: tmc: allocating memory when needed
  coresight: tmc: making prepare/unprepare functions generic
  coresight: tmc: splitting driver in ETB/ETF and ETR components
  coresight: tmc: cleaning up header file
  ...
2016-05-20 21:20:31 -07:00
Linus Torvalds e10abc629f TTY and Serial driver update for 4.7-rc1
Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...
2016-05-20 20:57:27 -07:00
Linus Torvalds 410b42978a fbdev changes for 4.7
* imxfb: fix lcd power up
 * small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPshLAAoJEPo9qoy8lh71QNIQAKlSAb0C4PUK67NaymL3w1FO
 RhCAsmAeJdODV2iK7RhsKMUSnlFPkCZ3urFJz7tHv7B3k09QkzBBSHQdQpF6mWyu
 +Rna7NehCO44k+NM7zTnd3dbL5dq8H7wWCLKambHHWC8/tcsD+DLcoKHsFwdcZwe
 WeWA38R09uH0z6idPYv2vyjMH+cHcAE86SOaeQ/8jgqDmlX8kkXRVPlHaowhUYio
 dap9gtiy/+OWOIVDRTV7uWKtKZwt3KTIafCpZxRuynqZWET0jurDAyGiUqvXTGvC
 0RCuDsKMAhiysLkXRFRRBAeo6Yj6TGsGCNyLec/SE8VZbOxpfUJx+INQg/oqOdSq
 xg3PvMtAJH7JiGxSHZZGAR7mxYuzmWW8dXMk/Fu7UZgkCCiLbjdDmytAY5T6qTHz
 4Nq5omczxpj38d3UbcljXmNwudmIEes82sIYOalN2nxCEXuycCWyQO0U0swmkaqH
 4ISSJY8Gej10QXO8mivv1q9y9BaOJfUeoqtyNR4zQAiulfjZIbtyLeX3FRKLTjI/
 50K2YCGm06GP9CHGefzVl3PBgeZ49NGegu+Z8sRfYxAac3R0V4QaE+40ygFaOHCY
 Gq5dvEKXgJeq2i3nanlKwZkr7kB0FF/XqaH9RSYO7TaoyOg8GgeZYcj1sGzJwplu
 c4lRcKRlzRShV2HymHFv
 =iHUZ
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:

 - imxfb: fix lcd power up

 - small fixes and cleanups

* tag 'fbdev-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  fbdev: Use IS_ENABLED() instead of checking for built-in or module
  efifb: Don't show the mapping VA
  video: AMBA CLCD: Remove unncessary include in amba-clcd.c
  fbdev: ssd1307fb: Fix charge pump setting
  Documentation: fb: fix spelling mistakes
  fbdev: fbmem: implement error handling in fbmem_init()
  fbdev: sh_mipi_dsi: remove driver
  video: fbdev: imxfb: add some error handling
  video: fbdev: imxfb: fix semantic of .get_power and .set_power
  video: fbdev: omap2: Remove deprecated regulator_can_change_voltage() usage
2016-05-20 11:01:02 -07:00
Boris Brezillon 7ff666bc4b backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:05 +02:00
Boris Brezillon 6fbab835a9 backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:05 +02:00
Boris Brezillon 058be4d6c6 backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:04 +02:00
Boris Brezillon 6cb9644db7 backlight: pwm_bl: Use pwm_get_args() where appropriate
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:03 +02:00
Boris Brezillon 717c18f0e4 fbdev: ssd1307fb: Use pwm_get_args() where appropriate
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:03 +02:00
Boris BREZILLON 4ff66efd59 backlight: lm3630a_bl: Stop messing with the pwm->period field
pwm->period field is not supposed to be changed by PWM users. The only
ones authorized to change it are the PWM core and PWM drivers.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:44:58 +02:00
Boris BREZILLON 7f044b09b6 backlight: pwm_bl: Remove useless call to pwm_set_period()
The PWM period will be set when calling pwm_config. Remove this useless
call to pwm_set_period(), which might mess up the internal PWM state.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:44:58 +02:00
Linus Torvalds 46c1345062 ACPI material for v4.7-rc1
- In-kernel ACPICA code update to the upstream release 20160422
    adding support for ACPI 6.1 along with some previously missing
    bits of ACPI 6.0 support, making a fair amount of fixes and
    cleanups and reducing divergences between the upstream ACPICA
    and the in-kernel code (Bob Moore, Lv Zheng, Al Stone, Aleksey
    Makarov, Will Miles).
 
  - ACPI Generic Event Device (GED) support and a fix for it (Sinan Kaya,
    Paul Gortmaker).
 
  - INT3406 thermal driver for display thermal management and ACPI
    backlight support code reorganization related to it (Aaron Lu,
    Arnd Bergmann).
 
  - Support for exporting the value returned by the _HRV (hardware
    revision) ACPI object via sysfs (Betty Dall).
 
  - Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown).
 
  - Rework of the handling of ACPI _OSI mechanism allowing the
    _OSI("Darwin") support to be overridden from the kernel command
    line among other things (Lv Zheng, Chen Yu).
 
  - Rework of the ACPI tables override mechanism to prepare it for
    the introduction of overlays support going forward (Lv Zheng,
    Rafael Wysocki).
 
  - Fixes related to the ECDT support and module-level execution
    of AML (Lv Zheng).
 
  - ACPI PCI interrupts management update to make it work better on
    ARM64 mostly (Sinan Kaya).
 
  - ACPI SRAT handling update to make the code process all entires
    in the table order regardless of the entry type (Lukasz Anaczkowski).
 
  - EFI power off support for full-hardware ACPI platforms that don't
    support ACPI S5 (Chen Yu).
 
  - Fixes and cleanups related to the ACPI core's sysfs interface
    (Dan Carpenter, Betty Dall).
 
  - acpi_dev_present() API rework to reduce possible confusion related
    to it (Lukas Wunner).
 
  - Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXOjM+AAoJEILEb/54YlRxNO4P/0FsajR2iXfHybiHyJq+Iddk
 MX+Jealb5klnXXtuih90oOHft9NypV1ESO7bcmjSz+2tuSgoXifdI3GO0aFghj7v
 h8SaVpCGzlm+u8y+Ppbxk+eWHAV1+ohV8uaO47yDUjuyZgG6c702QqrJVaqunQoq
 KQd+kqK5bhcaLhrx9Ro0I4Jbz0TdFa8j7noUTRXtDfJ9V4xZ3a6QfXz3H6GU4L31
 kNKjroxkFXpHMj2mYXuskqw2IWoRZw7Z7kpLv0dM44nko6c+oM8/9BIx4xh1IbR4
 vvgn/C2QYe45fz4Or/qmrPzGZ/kQtLiiVC2B/GWbCTezu3Px9E3V2NI0xLktVe0g
 Y/MsRdzMs0TInWSVezOlTONmfcqZgPhbSmsuI9PJ7izxmzOLVk6tjXARkzWe2gQ0
 N/nOd7I8AMsTMdpBCvf6xjJXqHRl6jdXuHAIhcPC5DINQ0daz8FZ4Cw42MtVKo0I
 2OiZ7ZnAnDDHrptV9VwtEvo60Uw/QG8EhdMWyQVaFWe1pFNM9nQtD0P2QeMWUHhZ
 YL7Q63nM8flQIywcSj7jyMWroWZMOI/cFOLGxZjz+yXA3fRizl4J22kJ392gSQti
 da1X8OBKsOvYQutkeGeQCNYWp4j5uKpoMoR4iR4dOLNqguWxaicDSZgsU8cAAk0k
 W+lRS/E8l+we5rxEZYOd
 =rAwm
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "The new features here are ACPI 6.1 support (and some previously
  missing bits of ACPI 6.0 support) in ACPICA and two new drivers, a
  driver for the ACPI Generic Event Device (GED) feature introduced by
  ACPI 6.1 and the INT3406 thermal driver for display thermal
  management.  Also the value returned by the _HRV (hardware revision)
  ACPI object will be exported to user space via sysfs now.

  In addition to that, ACPI on ARM64 will not depend on EXPERT any more.

  The rest is mostly fixes and cleanups and some code reorganization.

  Specifics:

   - In-kernel ACPICA code update to the upstream release 20160422
     adding support for ACPI 6.1 along with some previously missing bits
     of ACPI 6.0 support, making a fair amount of fixes and cleanups and
     reducing divergences between the upstream ACPICA and the in-kernel
     code (Bob Moore, Lv Zheng, Al Stone, Aleksey Makarov, Will Miles)

   - ACPI Generic Event Device (GED) support and a fix for it (Sinan
     Kaya, Paul Gortmaker)

   - INT3406 thermal driver for display thermal management and ACPI
     backlight support code reorganization related to it (Aaron Lu, Arnd
     Bergmann)

   - Support for exporting the value returned by the _HRV (hardware
     revision) ACPI object via sysfs (Betty Dall)

   - Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown)

   - Rework of the handling of ACPI _OSI mechanism allowing the
     _OSI("Darwin") support to be overridden from the kernel command
     line among other things (Lv Zheng, Chen Yu)

   - Rework of the ACPI tables override mechanism to prepare it for the
     introduction of overlays support going forward (Lv Zheng, Rafael
     Wysocki)

   - Fixes related to the ECDT support and module-level execution of AML
     (Lv Zheng)

   - ACPI PCI interrupts management update to make it work better on
     ARM64 mostly (Sinan Kaya)

   - ACPI SRAT handling update to make the code process all entires in
     the table order regardless of the entry type (Lukasz Anaczkowski)

   - EFI power off support for full-hardware ACPI platforms that don't
     support ACPI S5 (Chen Yu)

   - Fixes and cleanups related to the ACPI core's sysfs interface (Dan
     Carpenter, Betty Dall)

   - acpi_dev_present() API rework to reduce possible confusion related
     to it (Lukas Wunner)

   - Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd)"

* tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
  ACPI / video: mark acpi_video_get_levels() inline
  Thermal / ACPI / video: add INT3406 thermal driver
  ACPI / GED: make evged.c explicitly non-modular
  ACPI / tables: Fix DSDT override mechanism
  ACPI / sysfs: fix error code in get_status()
  ACPICA: Update version to 20160422
  ACPICA: Move all ASCII utilities to a common file
  ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()
  ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read()
  ACPICA: Executer: Introduce a set of macros to handle bit width mask generation
  ACPICA: Hardware: Add optimized access bit width support
  ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro
  ACPICA: Renamed some #defined flag constants for clarity
  ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors
  ACPICA: ACPI 6.0: Update _BIX support for new package element
  ACPICA: ACPI 6.1: Support for new PCCT subtable
  ACPICA: Refactor evaluate_object to reduce nesting
  ACPICA: Divergence: remove unwanted spaces for typedef
  ACPI,PCI,IRQ: remove SCI penalize function
  ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
  ..
2016-05-16 19:41:41 -07:00
Javier Martinez Canillas ab366b40b8 fbdev: Use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-13 15:14:38 +03:00
Andy Lutomirski a53dd25827 efifb: Don't show the mapping VA
The framebuffer mapping virtual address leaks information about the
kernel memory layout.  Stop logging it.

Cc: Peter Jones <pjones@redhat.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-13 14:42:39 +03:00
Wang Hongcheng ffe1b6c453 video: AMBA CLCD: Remove unncessary include in amba-clcd.c
The header file asm/sizes.h is unnecessary.
And it can also be compiled under X86 arch after the removal.

Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 13:32:31 +03:00
Julian Scheel 80403b232b fbdev: ssd1307fb: Fix charge pump setting
Make sure bit 4 is set for the charge pump setting. It is required according
to SSD1306 App Note.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 13:29:36 +03:00
Alexey Khoroshilov 524edf3877 fbdev: fbmem: implement error handling in fbmem_init()
fbmem_init() ignores all errors, while fbmem_exit() does not
check if deallocating resources are valid.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 11:58:29 +03:00
Simon Horman 18b6562c24 fbdev: sh_mipi_dsi: remove driver
Remove the sh_mipi_dsi driver as it appears to be unused since
c0bb9b3027 ("ARCH: ARM: shmobile: Remove ag5evm board support").

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 11:53:38 +03:00
Uwe Kleine-König cc6df3a245 video: fbdev: imxfb: add some error handling
clk_prepare_enable can fail and if it does the controller must not be
considered enabled. So check for errors, properly unwind and give the
error code back to the caller.

While touching the clock code also enable the clocks in the same
direction and disable in reverse order.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 11:42:25 +03:00
Uwe Kleine-König 46ffe1097b video: fbdev: imxfb: fix semantic of .get_power and .set_power
.set_power gets passed an FB_BLANK_XXX value, not a bool. So 0 signals
on; and >1 means off. The same applies for return values of .get_power.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 11:42:12 +03:00
Greg Kroah-Hartman 725d0123df Merge 4.6-rc7 into char-misc-testing
This resolves a merge issue with drivers/hv/ring_buffer.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09 09:34:49 +02:00
Dave Airlie bafb86f5bc Linux 4.6-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXL7HfAAoJEHm+PkMAQRiGYe8IAJBGaPUq38EJh2YOV+AQf9v6
 t/alhwB3DUE1E0zjLy7I7JJ+xDXtKjZh9fS6OFuIS8Q3RIrBteIJ/oH8TPpt7yZ/
 SnP6rYPvYD6CImTyrh7+ORL/udEwJX8+YqFYAgUAq167gvpDjYj8r26VzdIaIN4/
 oBbL8NrQNWfODieywYyhUoitVhwMz09zmBfLtGVks4vd2jUJk2Fdd9cOtGV5tRfk
 DPndPgyQtbr8W0mKovV8sT9WkQeV5TsUr4MLgf7hjnAGYQ8+0KamkzzVVLBeBiiw
 uazyrOCFkddZp+N7KbmbOmazV/yULRuLGgDjVKazoCsOaKOvoGCzrCk7daOPy6Q=
 =CegX
 -----END PGP SIGNATURE-----

Merge tag 'v4.6-rc7' into drm-next

Merge this back as we've built up a fair few conflicts, and I have
some newer trees to pull in.
2016-05-09 13:49:56 +10:00
Aaron Lu 01c3664de6 video / backlight: remove the backlight_device_registered API
Since we will need the backlight_device_get_by_type API, we can use it
instead of the backlight_device_registered API whenever necessary so
remove the backlight_device_registered API.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-04 23:41:14 +02:00
Aaron Lu f6a4790a54 video / backlight: add two APIs for drivers to use
It is useful to get the backlight device's pointer and use it to set
backlight in some cases(the following patch will make use of it) so add
the two APIs and export them.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-04 23:41:14 +02:00
Noralf Trønnes ba0263340a fbdev: fb_defio: Export fb_deferred_io_mmap
Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot.
When the framebuffer memory is allocated using dma_alloc_writecombine()
instead of vmalloc(), I get cache syncing problems on ARM.
This solves it:

static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info,
					  struct vm_area_struct *vma)
{
	fb_deferred_io_mmap(info, vma);
	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);

	return 0;
}

Could this have been done in the core?
Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to
fb_pgprotect() at the end of the default fb_mmap implementation
(drivers/video/fbdev/core/fbmem.c). This is an architecture specific
function that on many platforms uses pgprot_writecombine(), but not on
all. And looking at some of the fb_mmap implementations, some of them
sets vm_page_prot to nocache for instance, so I think the safest bet is
to do this in the driver and not in the fbdev core. And we can't call
fb_pgprotect() from fb_deferred_io_mmap() either because we don't have
access to the file pointer that powerpc needs.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-5-git-send-email-noralf@tronnes.org
2016-05-02 16:24:49 +02:00
Jake Oshins 696ca5e82c drivers:hv: Use new vmbus_mmio_free() from client drivers.
This patch modifies all the callers of vmbus_mmio_allocate()
to call vmbus_mmio_free() instead of release_mem_region().

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 14:01:37 -07:00
Jiri Slaby 8ede5cce4f tty: vt, make color_table const
This means all ->con_set_palette have to have the second parameter
const too now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Ujfalusi 9b4639bb6a video: fbdev: omap2: Remove deprecated regulator_can_change_voltage() usage
regulator_can_change_voltage() is deprecated and it's use is not necessary
as commit:
6a0028b3dd regulator: Deprecate regulator_can_change_voltage()
describers it clearly.
As there is no practical use of it it can be removed.
At this point the regulator_set_voltage() calls can not be removed as the
DT data need to be fixed first.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-29 13:52:55 +03:00
Ard Biesheuvel 9822504c1f efifb: Enable the efi-framebuffer platform driver for ARM and arm64
Allows the efifb driver to be built for ARM and arm64. This simply involves
updating the Kconfig dependency expression, and supplying dummy versions of
efifb_setup_from_dmi().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-25-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:34:01 +02:00
Ard Biesheuvel 07ea7ec5df efifb: Use builtin_platform_driver and drop unused includes
Since efifb can only be built directly into the kernel, drop the module
specific includes and definitions. Drop some other includes we don't need
as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-20-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:58 +02:00
Ard Biesheuvel 21289ec02b x86/efi/efifb: Move DMI based quirks handling out of generic code
The efifb quirks handling based on DMI identification of the platform is
specific to x86, so move it to x86 arch code.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-19-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-28 11:33:57 +02:00
Vladimir Zapolskiy 4dacad6151 omapfb: panel-sharp-ls037v7dw01: fix check of gpio_to_desc() return value
The change fixes a check of gpio_to_desc() return value, the function
returns either a valid pointer to struct gpio_desc or NULL, this makes
IS_ERR() check invalid and may lead to a NULL pointer dereference in
runtime.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-18 12:18:37 +03:00
Linus Walleij f36fdacc5f video: ARM CLCD: runtime check for Versatile
The current compile-time check for inversed IENB/CNTL does not
work in multiplatform boots: as soon as versatile is included
in the build, the IENB/CNTL is switched and breaks graphics.
Convert this to a runtime switch.

Cc: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Fixes: a29da136de ("ARM: versatile: convert to multi-platform")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-18 12:08:43 +03:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Linus Torvalds 33c1f638a0 The clk changes for this release cycle are mostly dominated by
new device support in terms of LoC, but there has been some cleanup
 in the core as well as the usual minor clk additions to various
 drivers.
 
 Core:
 
  - parent tracking has been simplified
 
  - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
 
  - of_clk_init() doesn't consider disabled DT nodes anymore
 
  - clk_unregister() had an error path bug squashed
 
  - of_clk_get_parent_count() has been fixed to only return unsigned ints
 
  - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
 
 New Drivers:
 
  - NXP LPC18xx creg
 
  - QCOM IPQ4019 GCC
 
  - TI dm814x ADPLL
 
  - i.MX6QP
 
 Updates:
 
  - Cyngus audio clks found on Broadcom iProc devices
 
  - Non-critical fixes for BCM2385 PLLs
 
  - Samsung exynos5433 updates for clk id errors, HDMI support,
    suspend/resume simplifications
 
  - USB, CAN, LVDS, and FCP clks on shmobile devices
 
  - sunxi got support for more clks on new SoCs and went through a minor
    refactoring/rewrite to use a simpler factor clk construct
 
  - rockchip added some more clk ids and added suport for fraction dividers
 
  - QCOM GDSCs in msm8996
 
  - A new devm helper to make adding custom actions simpler (acked by Greg)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJW8fPZAAoJENidgRMleOc9sc0P/2b4k8FiFwjMXiiXI1rcEjiz
 ZjeVxzyAcwBiYoL8a2XONd+pihjLNcAbDbjk8SGUzmKDDz7elQbrhby/6o1dPlW/
 fQEQFa8Xa8zhZgidO1AFc1DmIcPg/u/Z58wHbjIcqDjvzKA63213Ud34NJsRtF6y
 +EJrIUZiTtj5q1pJgDmqlOv6ImmQtgW/AN51vNXCNNCyS9OsSgQm0DK5/f485HNc
 2y5NE5hpijso69HFet5chuT3DiDLz/0dxmgCm/w9CRRzkHxYl3lxV/v07B+rZBo5
 cWplFfvJqX7PvQtcP0sPPzZUfGT/vOeTboWprQwI4R3RObS18xLqlq6DEvOTmnqW
 Jh+9uNBq4+kwSz5GcYjpwvj7+W0FPgIaBVRHrEW9qeXkgDpYloPtnEt8C8GmO6Bt
 O0bgIzETq9mnRTA+VesIfjmTa4IYRDDUoDwGTw5CnW3jaZmtYJh8GhgZulMfPfyK
 vfWQkY2OesXFwct0rU8tFiswTPeTRgXqL3AsPYjTPAHx1kfBpvfOQTCzzT7eSBr7
 jykd9EXsXrYb/rpIxW7j6KjPpaWu+EouK06wc4TIBGrrWVTIV0ZvybzOBgf0FnpS
 UDx87OyQb8x9TDMrfKf6bmJyly8y1dXkutFYY4XKIGUydlXIf0kn7AnIXW6SR7mX
 fTEdLFMZ03ViCojtah5r
 =bZFY
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The clk changes for this release cycle are mostly dominated by new
  device support in terms of LoC, but there has been some cleanup in the
  core as well as the usual minor clk additions to various drivers.

  Core:
   - parent tracking has been simplified
   - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
   - of_clk_init() doesn't consider disabled DT nodes anymore
   - clk_unregister() had an error path bug squashed
   - of_clk_get_parent_count() has been fixed to only return unsigned ints
   - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone

  New Drivers:
   - NXP LPC18xx creg
   - QCOM IPQ4019 GCC
   - TI dm814x ADPLL
   - i.MX6QP

  Updates:
   - Cyngus audio clks found on Broadcom iProc devices
   - Non-critical fixes for BCM2385 PLLs
   - Samsung exynos5433 updates for clk id errors, HDMI support,
     suspend/resume simplifications
   - USB, CAN, LVDS, and FCP clks on shmobile devices
   - sunxi got support for more clks on new SoCs and went through a
     minor refactoring/rewrite to use a simpler factor clk construct
   - rockchip added some more clk ids and added suport for fraction
     dividers
   - QCOM GDSCs in msm8996
   - A new devm helper to make adding custom actions simpler (acked by Greg)"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits)
  clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
  clk: renesas: div6: use RENESAS for #define
  clk: renesas: Rename header file renesas.h
  clk: max77{686,802}: Remove CLK_IS_ROOT
  clk: versatile: Remove CLK_IS_ROOT
  clk: sunxi: Remove use of variable length array
  clk: fixed-rate: Remove CLK_IS_ROOT
  clk: qcom: Remove CLK_IS_ROOT
  doc: dt: add documentation for lpc1850-creg-clk driver
  clk: add lpc18xx creg clk driver
  clk: lpc32xx: fix compilation warning
  clk: xgene: Add missing parenthesis when clearing divider value
  clk: mb86s7x: Remove CLK_IS_ROOT
  clk: x86: Remove clkdev.h and clk.h includes
  clk: x86: Remove CLK_IS_ROOT
  clk: mvebu: Remove CLK_IS_ROOT
  clk: renesas: move drivers to renesas directory
  clk: si5{14,351,70}: Remove CLK_IS_ROOT
  clk: scpi: Remove CLK_IS_ROOT
  clk: s2mps11: Remove CLK_IS_ROOT
  ...
2016-03-23 06:06:45 -07:00
Linus Torvalds 266c73b777 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...
2016-03-21 13:48:00 -07:00
Linus Torvalds 643ad15d47 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
 "This tree adds support for a new memory protection hardware feature
  that is available in upcoming Intel CPUs: 'protection keys' (pkeys).

  There's a background article at LWN.net:

      https://lwn.net/Articles/643797/

  The gist is that protection keys allow the encoding of
  user-controllable permission masks in the pte.  So instead of having a
  fixed protection mask in the pte (which needs a system call to change
  and works on a per page basis), the user can map a (handful of)
  protection mask variants and can change the masks runtime relatively
  cheaply, without having to change every single page in the affected
  virtual memory range.

  This allows the dynamic switching of the protection bits of large
  amounts of virtual memory, via user-space instructions.  It also
  allows more precise control of MMU permission bits: for example the
  executable bit is separate from the read bit (see more about that
  below).

  This tree adds the MM infrastructure and low level x86 glue needed for
  that, plus it adds a high level API to make use of protection keys -
  if a user-space application calls:

        mmap(..., PROT_EXEC);

  or

        mprotect(ptr, sz, PROT_EXEC);

  (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
  this special case, and will set a special protection key on this
  memory range.  It also sets the appropriate bits in the Protection
  Keys User Rights (PKRU) register so that the memory becomes unreadable
  and unwritable.

  So using protection keys the kernel is able to implement 'true'
  PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
  PROT_READ as well.  Unreadable executable mappings have security
  advantages: they cannot be read via information leaks to figure out
  ASLR details, nor can they be scanned for ROP gadgets - and they
  cannot be used by exploits for data purposes either.

  We know about no user-space code that relies on pure PROT_EXEC
  mappings today, but binary loaders could start making use of this new
  feature to map binaries and libraries in a more secure fashion.

  There is other pending pkeys work that offers more high level system
  call APIs to manage protection keys - but those are not part of this
  pull request.

  Right now there's a Kconfig that controls this feature
  (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
  (like most x86 CPU feature enablement code that has no runtime
  overhead), but it's not user-configurable at the moment.  If there's
  any serious problem with this then we can make it configurable and/or
  flip the default"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
  mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
  x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
  mm/core, x86/mm/pkeys: Add execute-only protection keys support
  x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
  x86/mm/pkeys: Allow kernel to modify user pkey rights register
  x86/fpu: Allow setting of XSAVE state
  x86/mm: Factor out LDT init from context init
  mm/core, x86/mm/pkeys: Add arch_validate_pkey()
  mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
  x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
  x86/mm/pkeys: Add Kconfig prompt to existing config option
  x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
  x86/mm/pkeys: Dump PKRU with other kernel registers
  mm/core, x86/mm/pkeys: Differentiate instruction fetches
  x86/mm/pkeys: Optimize fault handling in access_error()
  mm/core: Do not enforce PKEY permissions on remote mm access
  um, pkeys: Add UML arch_*_access_permitted() methods
  mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
  x86/mm/gup: Simplify get_user_pages() PTE bit handling
  ...
2016-03-20 19:08:56 -07:00
Linus Torvalds 1a46712aa9 This is the bulk of GPIO changes for kernel v4.6:
Core changes:
 
 - The gpio_chip is now a *real device*. Until now the gpio chips
   were just piggybacking the parent device or (gasp) floating in
   space outside of the device model. We now finally make GPIO chips
   devices. The gpio_chip will create a gpio_device which contains
   a struct device, and this gpio_device struct is kept private.
   Anything that needs to be kept private from the rest of the kernel
   will gradually be moved over to the gpio_device.
 
 - As a result of making the gpio_device a real device, we have added
   resource management, so devm_gpiochip_add_data() will cut down on
   overhead and reduce code lines. A huge slew of patches convert
   almost all drivers in the subsystem to use this.
 
 - Building on making the GPIO a real device, we add the first step
   of a new userspace ABI: the GPIO character device. We take small
   steps here, so we first add a pure *information* ABI and the tool
   "lsgpio" that will list all GPIO devices on the system and all
   lines on these devices. We can now discover GPIOs properly from
   userspace. We still have not come up with a way to actually *use*
   GPIOs from userspace.
 
 - To encourage people to use the character device for the future,
   we have it always-enabled when using GPIO. The old sysfs ABI is
   still opt-in (and can be used in parallel), but is marked as
   deprecated. We will keep it around for the foreseeable future,
   but it will not be extended to cover ever more use cases.
 
 Cleanup:
 
 - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
   includes. This dates back to when GPIO was an opt-in feature and
   no shared library even existed: just a header file with proper
   prototypes was provided and all semantics were up to the arch to
   implement. These patches make the GPIO chip even more a proper
   device and cleans out leftovers of the old in-kernel API here
   and there. Still some cruft is left but it's very little now.
 
 - There is still some clamping of return values for .get() going
   on, but we now return sane values in the vast majority of drivers
   and the errorpath is sanitized. Some patches for powerpc, blackfin
   and unicore still drop in.
 
 - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
   implementations to use gpiochip_add_data() and cut down on code
   lines.
 
 - MPC8xxx is converted to use the generic GPIO helpers.
 
 - ATH79 is converted to use the generic GPIO helpers.
 
 New drivers:
 
 - WinSystems WS16C48
 
 - Acces 104-DIO-48E
 
 - F81866 (a F7188x variant)
 
 - Qoric (a MPC8xxx variant)
 
 - TS-4800
 
 - SPI serializers (pisosr): simple 74xx shift registers connected
   to SPI to obtain a dirt-cheap output-only GPIO expander.
 
 - Texas Instruments TPIC2810
 
 - Texas Instruments TPS65218
 
 - Texas Instruments TPS65912
 
 - X-Gene (ARM64) standby GPIO controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6m24AAoJEEEQszewGV1zUasP/RpTrjRcNI5QFHjudd2oioDx
 R/IljC06Q072ZqVy/MR7QxwhoU8jUnCgKgv4rgMa1OcfHblxC2R1+YBKOUSij831
 E+SYmYDYmoMhN7j5Aslr66MXg1rLdFSdCZWemuyNruAK8bx6cTE1AWS8AELQzzTn
 Re/CPpCDbujLy0ZK2wJHgr9ZkdcBGICtDRCrOR3Kyjpwk/DSZcruK1PDN+VQMI3k
 bJlwgtGenOHINgCq/16edpwj/hzmoJXhTOZXJHI5XVR6czTwb3SvCYACvCkauI/a
 /N7b3quG88b5y0OPQPVxp5+VVl9GyVcv5oGzIfTNat/g5QinShZIT4kVV9r0xu6/
 TQHh1HlXleh+QI3yX0oRv9ztHreMf+vdpw1dhIwLqHqfJ7AWdOGk7BbKjwCrsOoq
 t/qUVFnyvooLpyr53Z5JY8+LqyynHF68G+jUQyHLgTZ0GCE+z+1jqNl1T501n3kv
 3CSlNYxSN/YUBN3cnroAIU/ZWcV4YRdxmOtEWP+7xgcdzTE6s/JHb2fuEfVHzWPf
 mHWtJGy8U0IR4VSSEln5RtjhRr0PAjTHeTOGAmivUnaIGDziTowyUVF+X5hwC77E
 DGTuLVx/Kniv173DK7xNAsUZNAETBa3fQZTgu+RfOpMiM1FZc7tI1rd7K7PjbyCc
 d2M0gcq+d11ITJTxC7OM
 =9AJ4
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel v4.6.  There is quite a
  lot of interesting stuff going on.

  The patches to other subsystems and arch-wide are ACKed as far as
  possible, though I consider things like per-arch <asm/gpio.h> as
  essentially a part of the GPIO subsystem so it should not be needed.

  Core changes:

   - The gpio_chip is now a *real device*.  Until now the gpio chips
     were just piggybacking the parent device or (gasp) floating in
     space outside of the device model.

     We now finally make GPIO chips devices.  The gpio_chip will create
     a gpio_device which contains a struct device, and this gpio_device
     struct is kept private.  Anything that needs to be kept private
     from the rest of the kernel will gradually be moved over to the
     gpio_device.

   - As a result of making the gpio_device a real device, we have added
     resource management, so devm_gpiochip_add_data() will cut down on
     overhead and reduce code lines.  A huge slew of patches convert
     almost all drivers in the subsystem to use this.

   - Building on making the GPIO a real device, we add the first step of
     a new userspace ABI: the GPIO character device.  We take small
     steps here, so we first add a pure *information* ABI and the tool
     "lsgpio" that will list all GPIO devices on the system and all
     lines on these devices.

     We can now discover GPIOs properly from userspace.  We still have
     not come up with a way to actually *use* GPIOs from userspace.

   - To encourage people to use the character device for the future, we
     have it always-enabled when using GPIO.  The old sysfs ABI is still
     opt-in (and can be used in parallel), but is marked as deprecated.

     We will keep it around for the foreseeable future, but it will not
     be extended to cover ever more use cases.

  Cleanup:

   - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
     includes.

     This dates back to when GPIO was an opt-in feature and no shared
     library even existed: just a header file with proper prototypes was
     provided and all semantics were up to the arch to implement.  These
     patches make the GPIO chip even more a proper device and cleans out
     leftovers of the old in-kernel API here and there.

     Still some cruft is left but it's very little now.

   - There is still some clamping of return values for .get() going on,
     but we now return sane values in the vast majority of drivers and
     the errorpath is sanitized.  Some patches for powerpc, blackfin and
     unicore still drop in.

   - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
     implementations to use gpiochip_add_data() and cut down on code
     lines.

   - MPC8xxx is converted to use the generic GPIO helpers.

   - ATH79 is converted to use the generic GPIO helpers.

  New drivers:

   - WinSystems WS16C48

   - Acces 104-DIO-48E

   - F81866 (a F7188x variant)

   - Qoric (a MPC8xxx variant)

   - TS-4800

   - SPI serializers (pisosr): simple 74xx shift registers connected to
     SPI to obtain a dirt-cheap output-only GPIO expander.

   - Texas Instruments TPIC2810

   - Texas Instruments TPS65218

   - Texas Instruments TPS65912

   - X-Gene (ARM64) standby GPIO controller"

* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
  Revert "Share upstreaming patches"
  gpio: mcp23s08: Fix clearing of interrupt.
  gpiolib: Fix comment referring to gpio_*() in gpiod_*()
  gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
  gpio: xgene: Fix kconfig for standby GIPO contoller
  gpio: Add generic serializer DT binding
  gpio: uapi: use 0xB4 as ioctl() major
  gpio: tps65912: fix bad merge
  Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
  gpio: omap: drop dev field from gpio_bank structure
  gpio: mpc8xxx: Slightly update the code for better readability
  gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
  gpio: mpc8xxx: Fixup setting gpio direction output
  gpio: mcp23s08: Add support for mcp23s18
  dt-bindings: gpio: altera: Fix altr,interrupt-type property
  gpio: add driver for MEN 16Z127 GPIO controller
  gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
  gpio: timberdale: Switch to devm_ioremap_resource()
  gpio: ts4800: Add IMX51 dependency
  gpiolib: rewrite gpiodev_add_to_list
  ...
2016-03-17 21:05:32 -07:00
Linus Torvalds 09fd671ccb fbdev changes for 4.6
* Miscallaneous small fixes to various fbdev drivers
 * Remove fb_rotate, which was never used
 * pmag fb improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6ANUAAoJEPo9qoy8lh71H9MP/jSZz1vkvNCZI6n4IGu6VCJg
 hJo59TVk1N+ug7iIfYCeKa+4E02sJFoMo+agA9xrzWC/tHAVlyMviL3HqyEGr9hS
 NLq5vg5odLd1QaCIHL9aLZ2C3TmJQTbt5jaUDgWou7exw/w2UCSehw5dg36YMdAK
 LRE52Y7yvo0ZrPykbzMbJWYMEyiiSRiujm9ql3RslYjFgMezq4urkRXS3pchJ3YV
 LCv+c3KNTFXt5bbbhYjcgkR++ORQsp2BaZ98Nbl2SMbSWeIwsJFMAFM6w8kvO6jV
 R3bUgT8VzXUX8fZ+PjoilvA8PyFBD3UHUHfFmNjQdUnkQs1zn4et4RAOEVLHa2pm
 nXQwxfQqY/tzzjTJlPHaG+rjqvFN+UU+iycPTdfZXptAFraWEzC8YOOiCFjlMfmp
 Zt5A1+jy7QJcBqMIEjvWOZy/RpAMfeUSvo8RJfe2IRV/o8yZ5dRcZxsIXBTk+k71
 s6YaylH9Jx2AMmckjm2noJLazb6gmSbX11x4tdhCIDDqs1ufqMBldU5lU7HJoLOz
 ZIsY7gWEkh50fZ1Rbi/lFw07T4cLgRaVeikGT3OGzCDboZRzrSmnhirZ7AYRsGRM
 AqmGDYde6CIEQIpUogsLWYTXHMK8sMNwzLC9vhRVnH+gry9e0dnLN4wh1nH4D7AK
 /v1JPHzTSUFKON9KySSt
 =HNGQ
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:

 - Miscallaneous small fixes to various fbdev drivers

 - Remove fb_rotate, which was never used

 - pmag fb improvements

* tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (21 commits)
  xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
  video: fbdev: sis: remove unused variable
  drivers/video: make fbdev/sunxvr2500.c explicitly non-modular
  drivers/video: make fbdev/sunxvr1000.c explicitly non-modular
  drivers/video: make fbdev/sunxvr500.c explicitly non-modular
  video: exynos: fix modular build
  fbdev: da8xx-fb: fix videomodes of lcd panels
  fbdev: kill fb_rotate
  video: fbdev: bt431: Correct cursor format control macro
  video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressing
  video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handling
  video: fbdev: bt455: Remove unneeded colormap helpers for cursor support
  video: fbdev: pmag-aa-fb: Report video timings
  video: fbdev: pmag-aa-fb: Enable building as a module
  video: fbdev: pmag-aa-fb: Adapt to current APIs
  video: fbdev: pmag-ba-fb: Fix the lower margin size
  fbdev: sh_mobile_lcdc: Use ARCH_RENESAS
  fbdev: n411: check return value
  fbdev: exynos: fix IS_ERR_VALUE usage
  video: Use bool instead int pointer for get_opt_bool() argument
  ...
2016-03-16 18:37:20 -07:00
Linus Torvalds 63e30271b0 PCI changes for the v4.6 merge window:
Enumeration
     Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
 
   Resource management
     Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     Don't assign or reassign immutable resources (Bjorn Helgaas)
     Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
     Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
     Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
     ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
     ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
     Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
     rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
     designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
 
   Virtualization
     Wait for up to 1000ms after FLR reset (Alex Williamson)
     Support SR-IOV on any function type (Kelly Zytaruk)
     Add ACS quirk for all Cavium devices (Manish Jaggi)
 
   AER
     Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
     Restore pci_ops pointer while calling original pci_ops (David Daney)
     Fix aer_inject error codes (Jean Delvare)
     Use dev_warn() in aer_inject (Jean Delvare)
     Log actual error causes in aer_inject (Jean Delvare)
     Log aer_inject error injections (Jean Delvare)
 
   VPD
     Prevent VPD access for buggy devices (Babu Moger)
     Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
     Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
     Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
     Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
     Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
     Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
     Update VPD definitions (Hannes Reinecke)
     Allow access to VPD attributes with size 0 (Hannes Reinecke)
     Determine actual VPD size on first access (Hannes Reinecke)
 
   Generic host bridge driver
     Move structure definitions to separate header file (David Daney)
     Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
     Expose pci_host_common_probe() for use by other drivers (David Daney)
 
   Altera host bridge driver
     Fix altera_pcie_link_is_up() (Ley Foon Tan)
 
   Cavium ThunderX host bridge driver
     Add PCIe host driver for ThunderX processors (David Daney)
     Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
 
   Freescale i.MX6 host bridge driver
     Add DT bindings to configure PHY Tx driver settings (Justin Waters)
     Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
     Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
     Remove broken Gen2 workaround (Lucas Stach)
     Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
 
   Freescale Layerscape host bridge driver
     Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
 
   Intel VMD host bridge driver
     Attach VMD resources to parent domain's resource tree (Jon Derrick)
     Set bus resource start to 0 (Keith Busch)
 
   Microsoft Hyper-V host bridge driver
     Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
     Look up IRQ domain by fwnode_handle (Jake Oshins)
     Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
 
   NVIDIA Tegra host bridge driver
     Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
     Implement ->{add,remove}_bus() callbacks (Thierry Reding)
     Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
     Track bus -> CPU mapping (Thierry Reding)
     Remove misleading PHYS_OFFSET (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     ARC: Add PCI support (Joao Pinto)
     Add generic dw_pcie_wait_for_link() (Joao Pinto)
     Add default link up check if sub-driver doesn't override (Joao Pinto)
     Add driver for prototyping kits based on ARC SDP (Joao Pinto)
 
   TI Keystone host bridge driver
     Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
 
   Xilinx AXI host bridge driver
     Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
     Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
     Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
     Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
     microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
 
   Xilinx NWL host bridge driver
     Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
 
   Miscellaneous
     Check device_attach() return value always (Bjorn Helgaas)
     Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
     Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
     Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
     unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
     Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
     Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
     Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
     frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
     Move pci_dma_* helpers to common code (Christoph Hellwig)
     Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
     Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
     Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6
 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z
 j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO
 n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0
 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB
 XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY
 rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB
 p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz
 lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA
 YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D
 R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU
 c8zT9dJgyJVE3Z7cnPJ4
 =otsF
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
2016-03-16 14:45:55 -07:00
Dave Airlie 9b61c0fcdf Merge drm-fixes into drm-next.
Nouveau wanted this to avoid some worse conflicts when I merge that.
2016-03-14 09:46:02 +10:00
Arnd Bergmann 13aa38e291 xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
The Xen framebuffer driver selects the xen keyboard driver, so the latter
will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT
is a loadable module, this configuration cannot work. On mainline kernels,
the symbol will be enabled but not used, while in combination with
a patch I have to detect such useless configurations, we get the
expected link failure:

drivers/input/built-in.o: In function `xenkbd_remove':
xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device'
xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device'

This removes the extra "select", as it just causes more trouble than
it helps. In theory, some defconfig file might break if it has
XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig
fragment we ship in the kernel (kernel/configs/xen.config) however
already enables both, and anyone using an old .config file would
keep having both enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Fixes: 36c1132e34 ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND")
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-11 13:37:02 +02:00
Luis R. Rodriguez f6e45661f9 dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.

Build tested successfully with allmodconfig.

The following Coccinelle SmPL patch was used for this simple
transformation:

@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@

-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)

@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@

-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)

@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@

-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)

We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.

Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-09 14:57:51 +01:00
Tomi Valkeinen caaecd9abe drm/omap: move dss_mgr_* declarations to omapdrm/omapfb
This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves the dss_mgr_*
function declarations.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03 17:38:21 +02:00
Tomi Valkeinen 564c7c7510 drm/omap: move struct dss_mgr_ops to omapdrm/omapfb
This patch continues the work to create private versions of the
omapdss.h header for omapdrm and omapfb. This one moves 'struct dss_mgr_ops'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03 17:38:21 +02:00
Tomi Valkeinen 35a339acca drm/omap, omapfb: move exported dispc function declarations to omapdrm/omapfb
omapdrm and omapfb still share the same include/video/omapdss.h. We need
to change that so that we can proceed with omapdrm work.

However, it's not trivial to make separate omapfb and omapdrm versions
of omapdss.h, as that file is also included in other places like arch
code, audio code and omap_vout code. So we'll do it piece by piece.

This patch makes private versions of all the dispc function declarations
that are in omapdss.h. For omapdrm we create a new file,
drivers/gpu/drm/omapdrm/dss/omapdss.h, which will contain headers meant
to be visible outside omapdss.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03 17:38:21 +02:00