Commit Graph

25 Commits

Author SHA1 Message Date
Milan Broz 772ae5f54d dm crypt: optionally support discard requests
Add optional parameter field to dmcrypt table and support
"allow_discards" option.

Discard requests bypass crypt queue processing. Bio is simple remapped
to underlying device.

Note that discard will be never enabled by default because of security
consequences.  It is up to the administrator to enable it for encrypted
devices.

(Note that userspace cryptsetup does not understand new optional
parameters yet.  Support for this will come later.  Until then, you
should use 'dmsetup' to enable and disable this.)

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
Jonathan Brassow b12d437b73 dm raid: support metadata devices
Add the ability to parse and use metadata devices to dm-raid.  Although
not strictly required, without the metadata devices, many features of
RAID are unavailable.  They are used to store a superblock and bitmap.

The role, or position in the array, of each device must be recorded in
its superblock.  This is to help with fault handling, array reshaping,
and sanity checks.  RAID 4/5/6 devices must be loaded in a specific order:
in this way, the 'array_position' field helps validate the correctness
of the mapping when it is loaded.  It can be used during reshaping to
identify which devices are added/removed.  Fault handling is impossible
without this field.  For example, when a device fails it is recorded in
the superblock.  If this is a RAID1 device and the offending device is
removed from the array, there must be a way during subsequent array
assembly to determine that the failed device was the one removed.  This
is done by correlating the 'array_position' field and the bit-field
variable 'failed_devices'.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:07 +01:00
Jonathan Brassow 46bed2b5c1 dm raid: add write_mostly parameter
Add the write_mostly parameter to RAID1 dm-raid tables.

This allows the user to set the WriteMostly flag on a RAID1 device that
should normally be avoided for read I/O.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:07 +01:00
Jonathan Brassow c1084561bb dm raid: add region_size parameter
Allow the user to specify the region_size.

Ensures that the supplied value meets md's constraints, viz. the number of
regions does not exceed 2^21.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:07 +01:00
Jonathan Brassow c0a2fa1ef1 dm raid: improve table parameters documentation
Add more information about some dm-raid table parameters and clarify how
parameters are printed when 'dmsetup table' is issued.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:06 +01:00
Mike Snitzer a3998799fb dm flakey: add corrupt_bio_byte feature
Add corrupt_bio_byte feature to simulate corruption by overwriting a byte at a
specified position with a specified value during intervals when the device is
"down".

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:06 +01:00
Mike Snitzer b26f5e3d71 dm flakey: add drop_writes
Add 'drop_writes' option to drop writes silently while the
device is 'down'.  Reads are not touched.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:05 +01:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Josef Bacik 3407ef5262 dm: add flakey target
This target is the same as the linear target except that it returns I/O
errors periodically.  It's been found useful in simulating failing
devices for testing purposes.

I needed a dm target to do some failure testing on btrfs's raid code, and
Mike pointed me at this.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:24 +00:00
Jiri Kosina 0a9d59a246 Merge branch 'master' into for-next 2011-02-15 10:24:31 +01:00
Andrea Gelmini adc0485b9e Documentation: dm-crypt: update cryptsetup homepage
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Acked-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-13 23:18:59 +01:00
NeilBrown 9d09e663d5 dm: raid456 basic support
This patch is the skeleton for the DM target that will be
the bridge from DM to MD (initially RAID456 and later RAID1).  It
provides a way to use device-mapper interfaces to the MD RAID456
drivers.

As with all device-mapper targets, the nominal public interfaces are the
constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO
and STATUSTYPE_TABLE).  The CTR table looks like the following:

1: <s> <l> raid \
2:	<raid_type> <#raid_params> <raid_params> \
3:	<#raid_devs> <meta_dev1> <dev1> .. <meta_devN> <devN>

Line 1 contains the standard first three arguments to any device-mapper
target - the start, length, and target type fields.  The target type in
this case is "raid".

Line 2 contains the arguments that define the particular raid
type/personality/level, the required arguments for that raid type, and
any optional arguments.  Possible raid types include: raid4, raid5_la,
raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc.  (again, raid1 is
planned for the future.)  The list of required and optional parameters
is the same for all the current raid types.  The required parameters are
positional, while the optional parameters are given as key/value pairs.
The possible parameters are as follows:
 <chunk_size>		Chunk size in sectors.
 [[no]sync]		Force/Prevent RAID initialization
 [rebuild <idx>]	Rebuild the drive indicated by the index
 [daemon_sleep <ms>]	Time between bitmap daemon work to clear bits
 [min_recovery_rate <kB/sec/disk>]	Throttle RAID initialization
 [max_recovery_rate <kB/sec/disk>]	Throttle RAID initialization
 [max_write_behind <value>]		See '-write-behind=' (man mdadm)
 [stripe_cache <sectors>]		Stripe cache size for higher RAIDs

Line 3 contains the list of devices that compose the array in
metadata/data device pairs.  If the metadata is stored separately, a '-'
is given for the metadata device position.  If a drive has failed or is
missing at creation time, a '-' can be given for both the metadata and
data drives for a given position.

Examples:
# RAID4 - 4 data drives, 1 parity
# No metadata devices specified to hold superblock/bitmap info
# Chunk size of 1MiB
# (Lines separated for easy reading)
0 1960893648 raid \
	raid4 1 2048 \
	5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81

# RAID4 - 4 data drives, 1 parity (no metadata devices)
# Chunk size of 1MiB, force RAID initialization,
#	min recovery rate at 20 kiB/sec/disk
0 1960893648 raid \
        raid4 4 2048 min_recovery_rate 20 sync\
        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81

Performing a 'dmsetup table' should display the CTR table used to
construct the mapping (with possible reordering of optional
parameters).

Performing a 'dmsetup status' will yield information on the state and
health of the array.  The output is as follows:
1: <s> <l> raid \
2:	<raid_type> <#devices> <1 health char for each dev> <resync_ratio>

Line 1 is standard DM output.  Line 2 is best shown by example:
	0 1960893648 raid raid4 5 AAAAA 2/490221568
Here we can see the RAID type is raid4, there are 5 devices - all of
which are 'A'live, and the array is 2/490221568 complete with recovery.

Cc: linux-raid@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 20:00:02 +00:00
Milan Broz d1f9642381 dm crypt: add multi key capability
This patch adds generic multikey handling to be used
in following patch for Loop-AES mode compatibility.

This patch extends mapping table to optional keycount and
implements generic multi-key capability.

With more keys defined the <key> string is divided into
several <keycount> sections and these are used for tfms.

The tfm is used according to sector offset
(sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount])
(only power of two values supported for keycount here).

Because of tfms per-cpu allocation, this mode can be take
a lot of memory on large smp systems.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
Justin P. Mattock 0ea6e61122 Documentation: update broken web addresses.
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00
Mike Snitzer c53a381efb dm: document when snapshot has finished merging
Update Documentation/device-mapper/snapshot.txt to cover "How to
determine when a snapshot has finished merging".

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06 02:29:56 +00:00
Mikulas Patocka d698aa4500 dm snapshot: add merge target
The snapshot-merge target allows a snapshot to be merged back into the
snapshot's origin device.

One anticipated use of snapshot merging is the rollback of filesystems
to back out problematic system upgrades.

This patch adds snapshot-merge target management to both
dm_snapshot_init() and dm_snapshot_exit().  As an initial place-holder,
snapshot-merge is identical to the snapshot target.  Documentation is
provided.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:30 +00:00
Jonthan Brassow f5db4af466 dm raid1: add userspace log
This patch contains a device-mapper mirror log module that forwards
requests to userspace for processing.

The structures used for communication between kernel and userspace are
located in include/linux/dm-log-userspace.h.  Due to the frequency,
diversity, and 2-way communication nature of the exchanges between
kernel and userspace, 'connector' was chosen as the interface for
communication.

The first log implementations written in userspace - "clustered-disk"
and "clustered-core" - support clustered shared storage.   A userspace
daemon (in the LVM2 source code repository) uses openAIS/corosync to
process requests in an ordered fashion with the rest of the nodes in the
cluster so as to prevent log state corruption.  Other implementations
with no association to LVM or openAIS/corosync, are certainly possible.

(Imagine if two machines are writing to the same region of a mirror.
They would both mark the region dirty, but you need a cluster-aware
entity that can handle properly marking the region clean when they are
done.  Otherwise, you might clear the region when the first machine is
done, not the second.)

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
Kiyoshi Ueda f392ba889b dm mpath: add service time load balancer
This patch adds a service time oriented dynamic load balancer,
dm-service-time, which selects the path with the shortest estimated
service time for the incoming I/O.
The service time is estimated by dividing the in-flight I/O size
by a performance value of each path.

The performance value can be given as a table argument at the table
loading time.  If no performance value is given, all paths are
considered equal.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:28 +01:00
Kiyoshi Ueda fd5e033908 dm mpath: add queue length load balancer
This patch adds a dynamic load balancer, dm-queue-length, which
balances the number of in-flight I/Os across the paths.

The code is based on the patch posted by Stefan Bader:
https://www.redhat.com/archives/dm-devel/2005-October/msg00050.html

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:27 +01:00
Milan Broz e3dcc5a387 dm crypt: add documentation
Add description of dm-crypt to device-mapper documentation.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25 13:27:03 +01:00
Mike Anderson 7a8c3d3b92 dm: uevent generate events
This patch adds support for the dm_path_event dm_send_event functions which
create and send udev events.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-20 02:01:26 +01:00
Heinz Mauelshagen 26b9f22870 dm: delay target
New device-mapper target that can delay I/O (for testing).  Reads can be
separated from writes, redirected to different underlying devices and delayed
by differing amounts of time.

Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com>
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:47 -07:00
Paolo 'Blaisorblade' Giarrusso 411f11405c [PATCH] Fix dm-snapshot tutorial in Documentation
I've recently added this documentation, Alasdair gave some corrections, and
here are some further corrections on top of his work (partly style issue,
partly a technical error due to different past experience, partly a note
which I've added - i.e.  transient snapshots are lighter).

Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Paolo 'Blaisorblade' Giarrusso e484585ec3 [PATCH] Add dm-snapshot tutorial in Documentation
I've recently discovered the real functionality of device-mapper snapshots,
and since they are not well known, I've decided to write some docs for
them.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:37 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00