Commit Graph

246 Commits

Author SHA1 Message Date
Theodore Ts'o 9d0be50230 ext4: Calculate metadata requirements more accurately
In the past, ext4_calc_metadata_amount(), and its sub-functions
ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount()
badly over-estimated the number of metadata blocks that might be
required for delayed allocation blocks.  This didn't matter as much
when functions which managed the reserved metadata blocks were more
aggressive about dropping reserved metadata blocks as delayed
allocation blocks were written, but unfortunately they were too
aggressive.  This was fixed in commit 0637c6f, but as a result the
over-estimation by ext4_calc_metadata_amount() would lead to reserving
2-3 times the number of pending delayed allocation blocks as
potentially required metadata blocks.  So if there are 1 megabytes of
blocks which have been not yet been allocation, up to 3 megabytes of
space would get reserved out of the user's quota and from the file
system free space pool until all of the inode's data blocks have been
allocated.

This commit addresses this problem by much more accurately estimating
the number of metadata blocks that will be required.  It will still
somewhat over-estimate the number of blocks needed, since it must make
a worst case estimate not knowing which physical blocks will be
needed, but it is much more accurate than before.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-01-01 02:41:30 -05:00
Andrew Morton a6b43e3825 ext4: fix unsigned long long printk warning in super.c
sparc64 allmodconfig:

fs/ext4/super.c: In function `lifetime_write_kbytes_show':
fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4)
fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4)

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23 07:48:08 -05:00
Theodore Ts'o 51b7e3c9fb ext4: add module aliases for ext2 and ext3
Add module aliases for ext2 and ext3 when CONFIG_EXT4_USE_FOR_EXT23 is
set.  This makes the existing user-space stuff like mkinitrd working
as is.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-21 10:56:09 -05:00
Dmitry Monakhov a9e7f44720 ext4: Convert to generic reserved quota's space management.
This patch also fixes write vs chown race condition.

Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23 13:33:55 +01:00
André Goddard Rosa e7d2860b69 tree-wide: convert open calls to remove spaces to skip_spaces() lib function
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.

It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
   text    data     bss     dec     hex filename
  64688     584     592   65864   10148 (TOTALS-BEFORE)
  64641     584     592   65817   10119 (TOTALS-AFTER)

Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".

Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
    drivers/leds/led-class.c
    drivers/leds/ledtrig-timer.c
    drivers/video/output.c

@@
expression str;
@@

( // ignore skip_spaces cases
while (*str &&  isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:32 -08:00
Linus Torvalds 3126c136bc Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
  ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
  ext3: Fix data / filesystem corruption when write fails to copy data
  ext4: Support for 64-bit quota format
  ext3: Support for vfsv1 quota format
  quota: Implement quota format with 64-bit space and inode limits
  quota: Move definition of QFMT_OCFS2 to linux/quota.h
  ext2: fix comment in ext2_find_entry about return values
  ext3: Unify log messages in ext3
  ext2: clear uptodate flag on super block I/O error
  ext2: Unify log messages in ext2
  ext3: make "norecovery" an alias for "noload"
  ext3: Don't update the superblock in ext3_statfs()
  ext3: journal all modifications in ext3_xattr_set_handle
  ext2: Explicitly assign values to on-disk enum of filetypes
  quota: Fix WARN_ON in lookup_one_len
  const: struct quota_format_ops
  ubifs: remove manual O_SYNC handling
  afs: remove manual O_SYNC handling
  kill wait_on_page_writeback_range
  vfs: Implement proper O_SYNC semantics
  ...
2009-12-11 15:31:13 -08:00
Jan Kara 5a20bdfcdc ext4: Support for 64-bit quota format
Add support for new 64-bit quota format. It is enough to add proper
mount options handling. The rest is done by the generic code.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:54 +01:00
Theodore Ts'o a214238d3b ext4: Do not override ext2 or ext3 if built they are built as modules
The CONFIG_EXT4_USE_FOR_EXT23 option must not try to take over the
ext2 or ext3 file systems if the those file system drivers are
configured to be built as mdoules.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-09 21:09:58 -05:00
Jan Kara b436b9bef8 ext4: Wait for proper transaction commit on fsync
We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-08 23:51:10 -05:00
Josef Bacik d4edac314e ext4: wait for log to commit when umounting
There is a potential race when a transaction is committing right when
the file system is being umounting.  This could reduce in a race
because EXT4_SB(sb)->s_group_info could be freed in ext4_put_super
before the commit code calls a callback so the mballoc code can
release freed blocks in the transaction, resulting in a panic trying
to access the freed s_group_info.

The fix is to wait for the transaction to finish committing before we
shutdown the multiblock allocator.  

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-08 21:48:58 -05:00
Theodore Ts'o 24b584240a ext4: Use ext4 file system driver for ext2/ext3 file system mounts
Add a new config option, CONFIG_EXT4_USE_FOR_EXT23 which if enabled,
will cause ext4 to be used for either ext2 or ext3 file system mounts
when ext2 or ext3 is not enabled in the configuration.

This allows minimalist kernel fanatics to drop to file system drivers
from their compiled kernel with out losing functionality.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-07 14:08:51 -05:00
Eric Sandeen e3bb52ae2b ext4: make "norecovery" an alias for "noload"
Users on the linux-ext4 list recently complained about differences
across filesystems w.r.t. how to mount without a journal replay.

In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext4.

Also show this status in /proc/mounts

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-19 14:28:50 -05:00
Eric Sandeen 5328e63531 ext4: make trim/discard optional (and off by default)
It is anticipated that when sb_issue_discard starts doing
real work on trim-capable devices, we may see issues.  Make
this mount-time optional, and default it to off until we know
that things are working out OK.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-19 14:25:42 -05:00
Theodore Ts'o 3f8fb9490e ext4: don't update the superblock in ext4_statfs()
commit a71ce8c6c9 updated ext4_statfs()
to update the on-disk superblock counters, but modified this buffer
directly without any journaling of the change.  This is one of the
accesses that was causing the crc errors in journal replay as seen in
kernel.org bugzilla #14354.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-11-23 07:24:52 -05:00
Theodore Ts'o cf40db137c ext4: remove failed journal checksum check
Now that we are checking for failed journal checksums in the jbd2
layer, we don't need to check in the ext4 mount path --- since a
checksum fail will result in ext4_load_journal() returning an error,
causing the file system to refuse to be mounted until e2fsck can deal
with the problem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-22 21:00:01 -05:00
Theodore Ts'o 503358ae01 ext4: avoid divide by zero when trying to mount a corrupted file system
If s_log_groups_per_flex is greater than 31, then groups_per_flex will
will overflow and cause a divide by zero error.  This can cause kernel
BUG if such a file system is mounted.

Thanks to Nageswara R Sastry for analyzing the failure and providing
an initial patch.

http://bugzilla.kernel.org/show_bug.cgi?id=14287

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-11-23 07:24:46 -05:00
Linus Torvalds d4da6c9ccf Revert "ext4: Remove journal_checksum mount option and enable it by default"
This reverts commit d0646f7b63, as
requested by Eric Sandeen.

It can basically cause an ext4 filesystem to miss recovery (and thus get
mounted with errors) if the journal checksum does not match.

Quoth Eric:

   "My hand-wavy hunch about what is happening is that we're finding a
    bad checksum on the last partially-written transaction, which is
    not surprising, but if we have a wrapped log and we're doing the
    initial scan for head/tail, and we abort scanning on that bad
    checksum, then we are essentially running an unrecovered filesystem.

    But that's hand-wavy and I need to go look at the code.

    We lived without journal checksums on by default until now, and at
    this point they're doing more harm than good, so we should revert
    the default-changing commit until we can fix it and do some good
    power-fail testing with the fixes in place."

See

	http://bugzilla.kernel.org/show_bug.cgi?id=14354

for all the gory details.

Requested-by: Eric Sandeen <sandeen@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-02 10:15:27 -08:00
Eric Sandeen f0e2dfa7f3 ext4: drop ext4dev compat
Kconfig & super.c promised it'd be gone by 2.6.31, so it's
about time to drop it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-10-01 02:21:07 -04:00
Theodore Ts'o 296c355cd6 ext4: Use tracepoints for mb_history trace file
The /proc/fs/ext4/<dev>/mb_history was maintained manually, and had a
number of problems: it required a largish amount of memory to be
allocated for each ext4 filesystem, and the s_mb_history_lock
introduced a CPU contention problem.  

By ripping out the mb_history code and replacing it with ftrace
tracepoints, and we get more functionality: timestamps, event
filtering, the ability to correlate mballoc history with other ext4
tracepoints, etc.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-30 00:32:42 -04:00
Theodore Ts'o 90576c0b9a ext4, jbd2: Drop unneeded printks at mount and unmount time
There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted.  Disable them to economize space
in the system logs.  In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 15:51:30 -04:00
Curt Wohlgemuth d3d1faf6a7 ext4: Handle nested ext4_journal_start/stop calls without a journal
This patch fixes a problem with handling nested calls to
ext4_journal_start/ext4_journal_stop, when there is no journal present.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 11:01:03 -04:00
Mingming Cao 8d5d02e6b1 ext4: async direct IO for holes and fallocate support
For async direct IO that covers holes or fallocate, the end_io
callback function now queued the convertion work on workqueue but
don't flush the work rightaway as it might take too long to afford.

But when fsync is called after all the data is completed, user expects
the metadata also being updated before fsync returns.

Thus we need to flush the conversion work when fsync() is called.
This patch keep track of a listed of completed async direct io that
has a work queued on workqueue.  When fsync() is called, it will go
through the list and do the conversion.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2009-09-28 15:48:29 -04:00
Mingming Cao 4c0425ff68 ext4: Use end_io callback to avoid direct I/O fallback to buffered I/O
Currently the DIO VFS code passes create = 0 when writing to the
middle of file.  It does this to avoid block allocation for holes, so
as not to expose stale data out when there is a parallel buffered read
(which does not hold the i_mutex lock).  Direct I/O writes into holes
falls back to buffered IO for this reason.

Since preallocated extents are treated as holes when doing a
get_block() look up (buffer is not mapped), direct IO over fallocate
also falls back to buffered IO.  Thus ext4 actually silently falls
back to buffered IO in above two cases, which is undesirable.

To fix this, this patch creates unitialized extents when a direct I/O
write into holes in sparse files, and registering an end_io callback which
converts the uninitialized extent to an initialized extent after the
I/O is completed.

Singed-Off-By: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-28 15:48:41 -04:00
Theodore Ts'o 55138e0bc2 ext4: Adjust ext4_da_writepages() to write out larger contiguous chunks
Work around problems in the writeback code to force out writebacks in
larger chunks than just 4mb, which is just too small.  This also works
around limitations in the ext4 block allocator, which can't allocate
more than 2048 blocks at a time.  So we need to defeat the round-robin
characteristics of the writeback code and try to write out as many
blocks in one inode before allowing the writeback code to move on to
another inode.  We add a a new per-filesystem tunable,
max_writeback_mb_bump, which caps this to a default of 128mb per
inode.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 13:31:31 -04:00
Alexey Dobriyan 0d54b217a2 const: make struct super_block::s_qcop const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Alexey Dobriyan 61e225dc34 const: make struct super_block::dq_op const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Eric Sandeen fb0a387dcd ext4: limit block allocations for indirect-block files to < 2^32
Today, the ext4 allocator will happily allocate blocks past
2^32 for indirect-block files, which results in the block
numbers getting truncated, and corruption ensues.

This patch limits such allocations to < 2^32, and adds
BUG_ONs if we do get blocks larger than that.

This should address RH Bug 519471, ext4 bitmap allocator 
must limit blocks to < 2^32

* ext4_find_goal() is modified to choose a goal < UINT_MAX,
  so that our starting point is in an acceptable range.

* ext4_xattr_block_set() is modified such that the goal block
  is < UINT_MAX, as above.

* ext4_mb_regular_allocator() is modified so that the group
  search does not continue into groups which are too high

* ext4_mb_use_preallocated() has a check that we don't use
  preallocated space which is too far out

* ext4_alloc_blocks() and ext4_xattr_block_set() add some BUG_ONs

No attempt has been made to limit inode locations to < 2^32,
so we may wind up with blocks far from their inodes.  Doing
this much already will lead to some odd ENOSPC issues when the
"lower 32" gets full, and further restricting inodes could
make that even weirder.

For high inodes, choosing a goal of the original, % UINT_MAX,
may be a bit odd, but then we're in an odd situation anyway,
and I don't know of a better heuristic.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-16 14:45:10 -04:00
Theodore Ts'o 3661d28615 ext4: Fix include/trace/events/ext4.h to work with Systemtap
Using relative pathnames in #include statements interacts badly with
SystemTap, since the fs/ext4/*.h header files are not packaged up as
part of a distribution kernel's header files.  Since systemtap doesn't
use TP_fast_assign(), we can use a blind structure definition and then
make sure the needed header files are defined before the ext4 source
files #include the trace/events/ext4.h header file.

https://bugzilla.redhat.com/show_bug.cgi?id=512478

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-14 22:59:50 -04:00
Theodore Ts'o 7ad9bb651f ext4: Fix initalization of s_flex_groups
The s_flex_groups array should have been initialized using atomic_add
to sum up the free counts from the block groups that make up a
flex_bg.  By using atomic_set, the value of the s_flex_groups array
was set to the values of the last block group in the flex_bg.  

The impact of this bug is that the block and inode allocation
algorithms might not pick the best flex_bg for new allocation.

Thanks to Damien Guibouret for pointing out this problem!

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-11 16:51:28 -04:00
Theodore Ts'o 71290b368a ext4: Don't update superblock write time when filesystem is read-only
This avoids updating the superblock write time when we are mounting
the root file system read/only but we need to replay the journal; at
that point, for people who are east of GMT and who make their clock
tick in localtime for Windows bug-for-bug compatibility, and this will
cause e2fsck to complain and force a full file system check.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-10 17:31:04 -04:00
Theodore Ts'o d0646f7b63 ext4: Remove journal_checksum mount option and enable it by default
There's no real cost for the journal checksum feature, and we should
make sure it is enabled all the time.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-05 12:50:43 -04:00
Eric Sandeen a13fb1a453 ext4: Add feature set check helper for mount & remount paths
A user reported that although his root ext4 filesystem was mounting
fine, other filesystems would not mount, with the:

"Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF"

error on his 32-bit box built without CONFIG_LBDAF.  This is because
the test at mount time for this situation was not being re-checked
on remount, and the normal boot process makes an ro->rw transition,
so this was being missed.

Refactor to make a common helper function to test the filesystem
features against the type of mount request (RO vs. RW) so that we 
stay consistent.

Addresses Red-Hat-Bugzilla: #517650

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-18 00:20:23 -04:00
Eric Sandeen bf43d84b18 ext4: reject too-large filesystems on 32-bit kernels
ext4 will happily mount a > 16T filesystem on a 32-bit box, but
this is not safe; writes to the block device will wrap past 16T
and the page cache can't index past 16T (232 index * 4k pages).

Adding another test to the existing "too many sectors" test
should do the trick.

Add a comment, a relevant return value, and fix the reference
to the CONFIG_LBD(AF) option as well.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-17 23:48:51 -04:00
Theodore Ts'o 78f1ddbb49 ext4: Avoid null pointer dereference when decoding EROFS w/o a journal
We need to check to make sure a journal is present before checking the
journal flags in ext4_decode_error().

Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-27 23:09:47 -04:00
Al Viro d4bfe2f76d switch ext4 to inode->i_acl
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:04 -04:00
Linus Torvalds 31583d6acf Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Fix kernel-doc parameter name typo in blk-settings.c:
  block: rename CONFIG_LBD to CONFIG_LBDAF
  block: Fix bounce_pfn setting
  hd: stop defining MAJOR_NR
2009-06-19 17:43:04 -07:00
Bartlomiej Zolnierkiewicz 90c699a9ee block: rename CONFIG_LBD to CONFIG_LBDAF
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".

Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 08:08:50 +02:00
Andreas Dilger 11013911da ext4: teach the inode allocator to use a goal inode number
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.

The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.

Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal.  This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.

Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-13 11:45:35 -04:00
Theodore Ts'o 4ab2f15b7f ext4: move the abort flag from s_mount_opts to s_mount_flags
We're running out of space in the mount options word, and
EXT4_MOUNT_ABORT isn't really a mount option, but a run-time flag.  So
move it to become EXT4_MF_FS_ABORTED in s_mount_flags.

Also remove bogus ext2_fs.h / ext4.h simultaneous #include protection,
which can never happen.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-13 10:09:36 -04:00
Theodore Ts'o 7f4520cc62 ext4: change s_mount_opt to be an unsigned int
We can only fit 32 options in s_mount_opt because an unsigned long is
32-bits on a x86 machine.  So use an unsigned int to save space on
64-bit platforms.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-13 10:09:41 -04:00
Alessio Igor Bogani 337eb00a2c Push BKL down into ->remount_fs()
[xfs, btrfs, capifs, shmem don't need BKL, exempt]

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:11 -04:00
Christoph Hellwig ebc1ac1645 ->write_super lock_super pushdown
Push down lock_super into ->write_super instances and remove it from the
caller.

Following filesystem don't need ->s_lock in ->write_super and are skipped:

 * bfs, nilfs2 - no other uses of s_lock and have internal locks in
	->write_super
 * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
 * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
 	->write_super
 * xfs - no other uses of s_lock and uses internal lock (buffer lock on
	superblock buffer) to serialize ->write_super.  Also xfs_fs_write_super
	is superflous and will go away in the next merge window

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:09 -04:00
Al Viro bbd6851a32 Push lock_super() into the ->remount_fs() of filesystems that care about it
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own.  Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").

[folded a build fix from hch]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:08 -04:00
Christoph Hellwig 6cfd014842 push BKL down into ->put_super
Move BKL into ->put_super from the only caller.  A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment.  Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.

[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00
Al Viro a9e220f832 No need to do lock_super() for exclusion in generic_shutdown_super()
We can't run into contention on it.  All other callers of lock_super()
either hold s_umount (and we have it exclusive) or hold an active
reference to superblock in question, which prevents the call of
generic_shutdown_super() while the reference is held.  So we can
replace lock_super(s) with get_fs_excl() in generic_shutdown_super()
(and corresponding change for unlock_super(), of course).

Since ext4 expects s_lock held for its put_super, take lock_super()
into it.  The rest of filesystems do not care at all.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00
Christoph Hellwig 8c85e12512 remove ->write_super call in generic_shutdown_super
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.

Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.

Exceptions:

 - affs already has identical copy & pasted code at the beginning of
   affs_put_super so no need to do it twice.
 - xfs does the right thing without it and I have changes pending for
   the xfs tree touching this are so I don't really need conflicts
   here..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:06 -04:00
Linus Torvalds c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Eric Sandeen b31e15527a ext4: Change all super.c messages to print the device
This patch changes ext4 super.c to include the device name with all 
warning/error messages, by using a new utility function ext4_msg. 
It's a rather large patch, but very mechanic. I left debug printks
alone.

This is a straightforward port of a patch which Andi Kleen did for
ext3.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-04 17:36:36 -04:00
Andreas Dilger 0b8e58a140 ext4: super.c whitespace cleanup
Cleanup of whitespace and formatting.  Initially driven by confusing indents
for the ext4_{block,inode}_bitmap() et. al. helper routines, but figured I'd
cleanup some other 80-column wrapping and other indenting problems at the
same time.

Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-03 17:59:28 -04:00
Theodore Ts'o 88b6edd17c ext4: Clean up calls to ext4_get_group_desc()
If the caller isn't planning on modifying the block group descriptors,
there's no need to pass in a pointer to a struct buffer_head.  Nuking
this saves a tiny amount of CPU time and stack space usage.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-25 11:50:39 -04:00