Commit Graph

377 Commits

Author SHA1 Message Date
Linus Torvalds 3ed4c0583d Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits)
  signal: trivial, fix the "timespec declared inside parameter list" warning
  job control: reorganize wait_task_stopped()
  ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping()
  signal: sys_sigprocmask() needs retarget_shared_pending()
  signal: cleanup sys_sigprocmask()
  signal: rename signandsets() to sigandnsets()
  signal: do_sigtimedwait() needs retarget_shared_pending()
  signal: introduce do_sigtimedwait() to factor out compat/native code
  signal: sys_rt_sigtimedwait: simplify the timeout logic
  signal: cleanup sys_rt_sigprocmask()
  x86: signal: sys_rt_sigreturn() should use set_current_blocked()
  x86: signal: handle_signal() should use set_current_blocked()
  signal: sigprocmask() should do retarget_shared_pending()
  signal: sigprocmask: narrow the scope of ->siglock
  signal: retarget_shared_pending: optimize while_each_thread() loop
  signal: retarget_shared_pending: consider shared/unblocked signals only
  signal: introduce retarget_shared_pending()
  ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/
  signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED
  signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending()
  ...
2011-05-20 13:33:21 -07:00
Tejun Heo 19e274630c job control: reorganize wait_task_stopped()
wait_task_stopped() tested task_stopped_code() without acquiring
siglock and, if stop condition existed, called wait_task_stopped() and
directly returned the result.  This patch moves the initial
task_stopped_code() testing into wait_task_stopped() and make
wait_consider_task() fall through to wait_task_continue() on 0 return.

This is for the following two reasons.

* Because the initial task_stopped_code() test is done without
  acquiring siglock, it may race against SIGCONT generation.  The
  stopped condition might have been replaced by continued state by the
  time wait_task_stopped() acquired siglock.  This may lead to
  unexpected failure of WNOHANG waits.

  This reorganization addresses this single race case but there are
  other cases - TASK_RUNNING -> TASK_STOPPED transition and EXIT_*
  transitions.

* Scheduled ptrace updates require changes to the initial test which
  would fit better inside wait_task_stopped().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-13 18:56:02 +02:00
Frederic Weisbecker bf26c01849 ptrace: Prepare to fix racy accesses on task breakpoints
When a task is traced and is in a stopped state, the tracer
may execute a ptrace request to examine the tracee state and
get its task struct. Right after, the tracee can be killed
and thus its breakpoints released.
This can happen concurrently when the tracer is in the middle
of reading or modifying these breakpoints, leading to dereferencing
a freed pointer.

Hence, to prepare the fix, create a generic breakpoint reference
holding API. When a reference on the breakpoints of a task is
held, the breakpoints won't be released until the last reference
is dropped. After that, no more ptrace request on the task's
breakpoints can be serviced for the tracer.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
2011-04-25 17:28:24 +02:00
Oleg Nesterov e46bc9b6fd Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into ptrace 2011-04-07 20:44:11 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Tejun Heo 45cb24a1da job control: Allow access to job control events through ptracees
Currently a real parent can't access job control stopped/continued
events through a ptraced child.  This utterly breaks job control when
the children are ptraced.

For example, if a program is run from an interactive shell and then
strace(1) attaches to it, pressing ^Z would send SIGTSTP and strace(1)
would notice it but the shell has no way to tell whether the child
entered job control stop and thus can't tell when to take over the
terminal - leading to awkward lone ^Z on the terminal.

Because the job control and ptrace stopped states are independent,
there is no reason to prevent real parents from accessing the stopped
state regardless of ptrace.  The continued state isn't separate but
ptracers don't have any use for them as ptracees can never resume
without explicit command from their ptracers, so as long as ptracers
don't consume it, it should be fine.

Although this is a behavior change, because the previous behavior is
utterly broken when viewed from real parents and the change is only
visible to real parents, I don't think it's necessary to make this
behavior optional.

One situation to be careful about is when a task from the real
parent's group is ptracing.  The parent group is the recipient of both
ptrace and job control stop events and one stop can be reported as
both job control and ptrace stops.  As this can break the current
ptrace users, suppress job control stopped events for these cases.

If a real parent ptracer wants to know about both job control and
ptrace stops, it can create a separate process to serve the role of
real parent.

Note that this only updates wait(2) side of things.  The real parent
can access the states via wait(2) but still is not properly notified
(woken up and delivered signal).  Test case polls wait(2) with WNOHANG
to work around.  Notification will be updated by future patches.

Test case follows.

  #include <stdio.h>
  #include <unistd.h>
  #include <time.h>
  #include <errno.h>
  #include <sys/types.h>
  #include <sys/ptrace.h>
  #include <sys/wait.h>

  int main(void)
  {
	  const struct timespec ts100ms = { .tv_nsec = 100000000 };
	  pid_t tracee, tracer;
	  siginfo_t si;
	  int i;

	  tracee = fork();
	  if (tracee == 0) {
		  while (1) {
			  printf("tracee: SIGSTOP\n");
			  raise(SIGSTOP);
			  nanosleep(&ts100ms, NULL);
			  printf("tracee: SIGCONT\n");
			  raise(SIGCONT);
			  nanosleep(&ts100ms, NULL);
		  }
	  }

	  waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT);

	  tracer = fork();
	  if (tracer == 0) {
		  nanosleep(&ts100ms, NULL);
		  ptrace(PTRACE_ATTACH, tracee, NULL, NULL);

		  for (i = 0; i < 11; i++) {
			  si.si_pid = 0;
			  waitid(P_PID, tracee, &si, WSTOPPED);
			  if (si.si_pid && si.si_code == CLD_TRAPPED)
				  ptrace(PTRACE_CONT, tracee, NULL,
					 (void *)(long)si.si_status);
		  }
		  printf("tracer: EXITING\n");
		  return 0;
	  }

	  while (1) {
		  si.si_pid = 0;
		  waitid(P_PID, tracee, &si,
			 WSTOPPED | WCONTINUED | WEXITED | WNOHANG);
		  if (si.si_pid)
			  printf("mommy : WAIT status=%02d code=%02d\n",
				 si.si_status, si.si_code);
		  nanosleep(&ts100ms, NULL);
	  }
	  return 0;
  }

Before the patch, while ptraced, the parent can't see any job control
events.

  tracee: SIGSTOP
  mommy : WAIT status=19 code=05
  tracee: SIGCONT
  tracee: SIGSTOP
  tracee: SIGCONT
  tracee: SIGSTOP
  tracee: SIGCONT
  tracee: SIGSTOP
  tracer: EXITING
  mommy : WAIT status=19 code=05
  ^C

After the patch,

  tracee: SIGSTOP
  mommy : WAIT status=19 code=05
  tracee: SIGCONT
  mommy : WAIT status=18 code=06
  tracee: SIGSTOP
  mommy : WAIT status=19 code=05
  tracee: SIGCONT
  mommy : WAIT status=18 code=06
  tracee: SIGSTOP
  mommy : WAIT status=19 code=05
  tracee: SIGCONT
  mommy : WAIT status=18 code=06
  tracee: SIGSTOP
  tracer: EXITING
  mommy : WAIT status=19 code=05
  ^C

-v2: Oleg pointed out that wait(2) should be suppressed for the real
     parent's group instead of only the real parent task itself.
     Updated accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 10:37:01 +01:00
Tejun Heo 9b84cca256 job control: Fix ptracer wait(2) hang and explain notask_error clearing
wait(2) and friends allow access to stopped/continued states through
zombies, which is required as the states are process-wide and should
be accessible whether the leader task is alive or undead.
wait_consider_task() implements this by always clearing notask_error
and going through wait_task_stopped/continued() for unreaped zombies.

However, while ptraced, the stopped state is per-task and as such if
the ptracee became a zombie, there's no further stopped event to
listen to and wait(2) and friends should return -ECHILD on the tracee.

Fix it by clearing notask_error only if WCONTINUED | WEXITED is set
for ptraced zombies.  While at it, document why clearing notask_error
is safe for each case.

Test case follows.

  #include <stdio.h>
  #include <unistd.h>
  #include <pthread.h>
  #include <time.h>
  #include <sys/types.h>
  #include <sys/ptrace.h>
  #include <sys/wait.h>

  static void *nooper(void *arg)
  {
	  pause();
	  return NULL;
  }

  int main(void)
  {
	  const struct timespec ts1s = { .tv_sec = 1 };
	  pid_t tracee, tracer;
	  siginfo_t si;

	  tracee = fork();
	  if (tracee == 0) {
		  pthread_t thr;

		  pthread_create(&thr, NULL, nooper, NULL);
		  nanosleep(&ts1s, NULL);
		  printf("tracee exiting\n");
		  pthread_exit(NULL);	/* let subthread run */
	  }

	  tracer = fork();
	  if (tracer == 0) {
		  ptrace(PTRACE_ATTACH, tracee, NULL, NULL);
		  while (1) {
			  if (waitid(P_PID, tracee, &si, WSTOPPED) < 0) {
				  perror("waitid");
				  break;
			  }
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(long)si.si_status);
		  }
		  return 0;
	  }

	  waitid(P_PID, tracer, &si, WEXITED);
	  kill(tracee, SIGKILL);
	  return 0;
  }

Before the patch, after the tracee becomes a zombie, the tracer's
waitid(WSTOPPED) never returns and the program doesn't terminate.

  tracee exiting
  ^C

After the patch, tracee exiting triggers waitid() to fail.

  tracee exiting
  waitid: No child processes

-v2: Oleg pointed out that exited in addition to continued can happen
     for ptraced dead group leader.  Clear notask_error for ptraced
     child on WEXITED too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 10:37:01 +01:00
Tejun Heo 823b018e5b job control: Small reorganization of wait_consider_task()
Move EXIT_DEAD test in wait_consider_task() above ptrace check.  As
ptraced tasks can't be EXIT_DEAD, this change doesn't cause any
behavior change.  This is to prepare for further changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 10:37:01 +01:00
Jens Axboe 73c1010119 block: initial patch for on-stack per-task plugging
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00
Linus Torvalds 42776163e1 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  perf session: Fix infinite loop in __perf_session__process_events
  perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1)
  perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail
  perf tools: Emit clearer message for sys_perf_event_open ENOENT return
  perf stat: better error message for unsupported events
  perf sched: Fix allocation result check
  perf, x86: P4 PMU - Fix unflagged overflows handling
  dynamic debug: Fix build issue with older gcc
  tracing: Fix TRACE_EVENT power tracepoint creation
  tracing: Fix preempt count leak
  tracepoint: Add __rcu annotation
  tracing: remove duplicate null-pointer check in skb tracepoint
  tracing/trivial: Add missing comma in TRACE_EVENT comment
  tracing: Include module.h in define_trace.h
  x86: Save rbp in pt_regs on irq entry
  x86, dumpstack: Fix unused variable warning
  x86, NMI: Clean-up default_do_nmi()
  x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
  x86, NMI: Remove DIE_NMI_IPI
  x86, NMI: Add priorities to handlers
  ...
2011-01-11 11:02:13 -08:00
Stephane Eranian 0b3fcf178d perf_events: Move code around to prepare for cgroup
In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.

Other movements include hoisting some definitions and inlines
at the top of perf_event.c

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:50 +01:00
Christoph Lameter 909ea96468 core: Replace __get_cpu_var with __this_cpu_read if not used for an address.
__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.

However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes).  Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Nelson Elhage 33dd94ae1c do_exit(): make sure that we run with get_fs() == USER_DS
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit().  do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.

This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing.  I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.

A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.

Let's just stick it in do_exit instead.

[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02 14:51:16 -08:00
Oleg Nesterov e0a7021710 posix-cpu-timers: workaround to suppress the problems with mt exec
posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.

But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.

This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.

It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.

Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.

In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 14:16:03 -07:00
Namhyung Kim d16e15f5b0 exit: add lock context annotation on find_new_reaper()
find_new_reaper() releases and regrabs tasklist_lock but was missing
proper annotations.  Add it.  This remove following sparse warning:

 warning: context imbalance in 'find_new_reaper' - unexpected unlock

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:13 -07:00
Ying Han 3d5992d2ac oom: add per-mm oom disable count
It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing.  A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.

This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.

This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.

[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
Peter Zijlstra 4e231c7962 perf: Fix up delayed_put_task_struct()
I missed a perf_event_ctxp user when converting it to an array. Pull this
last user into perf_event.c as well and fix it up.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 21:07:09 +02:00
Daniel J Blueman f362b73244 Fix unprotected access to task credentials in waitid()
Using a program like the following:

	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/types.h>
	#include <sys/wait.h>

	int main() {
		id_t id;
		siginfo_t infop;
		pid_t res;

		id = fork();
		if (id == 0) { sleep(1); exit(0); }
		kill(id, SIGSTOP);
		alarm(1);
		waitid(P_PID, id, &infop, WCONTINUED);
		return 0;
	}

to call waitid() on a stopped process results in access to the child task's
credentials without the RCU read lock being held - which may be replaced in the
meantime - eliciting the following warning:

	===================================================
	[ INFO: suspicious rcu_dereference_check() usage. ]
	---------------------------------------------------
	kernel/exit.c:1460 invoked rcu_dereference_check() without protection!

	other info that might help us debug this:

	rcu_scheduler_active = 1, debug_locks = 1
	2 locks held by waitid02/22252:
	 #0:  (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310
	 #1:  (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>]
	wait_consider_task+0x19a/0xbe0

	stack backtrace:
	Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3
	Call Trace:
	 [<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0
	 [<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0
	 [<ffffffff81061d15>] do_wait+0xf5/0x310
	 [<ffffffff810620b6>] sys_waitid+0x86/0x1f0
	 [<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70
	 [<ffffffff81003282>] system_call_fastpath+0x16/0x1b

This is fixed by holding the RCU read lock in wait_task_continued() to ensure
that the task's current credentials aren't destroyed between us reading the
cred pointer and us reading the UID from those credentials.

Furthermore, protect wait_task_stopped() in the same way.

We don't need to keep holding the RCU read lock once we've read the UID from
the credentials as holding the RCU read lock doesn't stop the target task from
changing its creds under us - so the credentials may be outdated immediately
after we've read the pointer, lock or no lock.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Oleg Nesterov c7e49c1488 ptrace: optimize exit_ptrace() for the likely case
exit_ptrace() takes tasklist_lock unconditionally.  We need this lock to
avoid the race with ptrace_traceme(), it acts as a barrier.

Change its caller, forget_original_parent(), to call exit_ptrace() under
tasklist_lock.  Change exit_ptrace() to drop and reacquire this lock if
needed.

This allows us to add the fastpath list_empty(ptraced) check.  In the
likely no-tracees case exit_ptrace() just returns and we avoid the lock()
+ unlock() sequence.

"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> suggested to add this
check, and he reports that this change adds about 11% improvement in some
tests.

Suggested-and-tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
Oleg Nesterov b3ac022cb9 proc: turn signal_struct->count into "int nr_threads"
No functional changes, just s/atomic_t count/int nr_threads/.

With the recent changes this counter has a single user, get_nr_threads()
And, none of its callers need the really accurate number of threads, not
to mention each caller obviously races with fork/exit.  It is only used to
report this value to the user-space, except first_tid() uses it to avoid
the unnecessary while_each_thread() loop in the unlikely case.

It is a bit sad we need a word in struct signal_struct for this, perhaps
we can change get_nr_threads() to approximate the number of threads using
signal->live and kill ->nr_threads later.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:47 -07:00
Oleg Nesterov 97101eb41d exit: move taskstats_tgid_free() from __exit_signal() to free_signal_struct()
Move taskstats_tgid_free() from __exit_signal() to free_signal_struct().

This way signal->stats never points to nowhere and we can read ->stats
lockless.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov d40e48e02f exit: __exit_signal: use thread_group_leader() consistently
Cleanup:

- Add the boolean, group_dead = thread_group_leader(), for clarity.

- Do not test/set sig == NULL to detect the all-dead case, use this
  boolean.

- Pass this boolen to __unhash_process() and use it instead of another
  thread_group_leader() call which needs ->group_leader.

  This can be considered as microoptimization, but hopefully this also
  allows us do do other cleanups later.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov b7b8ff6373 signals: kill the awful task_rq_unlock_wait() hack
Now that task->signal can't go away we can revert the horrible hack added
by ad474caca3 ("fix for
account_group_exec_runtime(), make sure ->signal can't be freed under
rq->lock").

And we can do more cleanups sched_stats.h/posix-cpu-timers.c later.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov 4ada856fb0 signals: clear signal->tty when the last thread exits
When the last thread exits signal->tty is freed, but the pointer is not
cleared and points to nowhere.

This is OK.  Nobody should use signal->tty lockless, and it is no longer
possible to take ->siglock.  However this looks wrong even if correct, and
the nice OOPS is better than subtle and hard to find bugs.

Change __exit_signal() to clear signal->tty under ->siglock.

Note: __exit_signal() needs more cleanups.  It should not check "sig !=
NULL" to detect the all-dead case and we have the same issues with
signal->stats.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov ea6d290ca3 signals: make task_struct->signal immutable/refcountable
We have a lot of problems with accessing task_struct->signal, it can
"disappear" at any moment.  Even current can't use its ->signal safely
after exit_notify().  ->siglock helps, but it is not convenient, not
always possible, and sometimes it makes sense to use task->signal even
after this task has already dead.

This patch adds the reference counter, sigcnt, into signal_struct.  This
reference is owned by task_struct and it is dropped in
__put_task_struct().  Perhaps it makes sense to export
get/put_signal_struct() later, but currently I don't see the immediate
reason.

Rename __cleanup_signal() to free_signal_struct() and unexport it.  With
the previous changes it does nothing except kmem_cache_free().

Change __exit_signal() to not clear/free ->signal, it will be freed when
the last reference to any thread in the thread group goes away.

Note:
	- when the last thead exits signal->tty can point to nowhere, see
	  the next patch.

	- with or without this patch signal_struct->count should go away,
	  or at least it should be "int nr_threads" for fs/proc. This will
	  be addressed later.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov 4dec2a91fd fork/exit: move tty_kref_put() outside of __cleanup_signal()
tty_kref_put() has two callsites in copy_process() paths,

	1. if copy_process() suceeds it is called before we copy
	   signal->tty from parent

	2. otherwise it is called from __cleanup_signal() under
	   bad_fork_cleanup_signal: label

In both cases tty_kref_put() is not right and unneeded because we don't
have the balancing tty_kref_get().  Fortunately, this is harmless because
this can only happen without CLONE_THREAD, and in this case signal->tty
must be NULL.

Remove tty_kref_put() from copy_process() and __cleanup_signal(), and
change another caller of __cleanup_signal(), __exit_signal(), to call
tty_kref_put() by hand.

I hope this change makes sense by itself, but it is also needed to make
->signal refcountable.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov 4a59994297 exit: avoid sig->count in __exit_signal() to detect the group-dead case
Change __exit_signal() to check thread_group_leader() instead of
atomic_dec_and_test(&sig->count).  This must be equivalent, the group
leader must be released only after all other threads have exited and
passed __exit_signal().

Henceforth sig->count is not actually used, except in fs/proc for
get_nr_threads/etc.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov d344193a05 exit: avoid sig->count in de_thread/__exit_signal synchronization
de_thread() and __exit_signal() use signal_struct->count/notify_count for
synchronization.  We can simplify the code and use ->notify_count only.
Instead of comparing these two counters, we can change de_thread() to set
->notify_count = nr_of_sub_threads, then change __exit_signal() to
dec-and-test this counter and notify group_exit_task.

Note that __exit_signal() checks "notify_count > 0" just for symmetry with
exit_notify(), we could just check it is != 0.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:46 -07:00
Oleg Nesterov 9c33916844 exit: exit_notify() can trust signal->notify_count < 0
signal_struct->count in its current form must die.

- it has no reasons to be atomic_t

- it looks like a reference counter, but it is not

- otoh, we really need to make task->signal refcountable, just look at
  the extremely ugly task_rq_unlock_wait() called from __exit_signals().

- we should change the lifetime rules for task->signal, it should be
  pinned to task_struct.  We have a lot of code which can be simplified
  after that.

- it is not needed!  while the code is correct, any usage of this
  counter is artificial, except fs/proc uses it correctly to show the
  number of threads.

This series removes the usage of sig->count from exit pathes.

This patch:

Now that Veaceslav changed copy_signal() to use zalloc(), exit_notify()
can just check notify_count < 0 to ensure the execing sub-threads needs
the notification from us.  No need to do other checks, notify_count != 0
must always mean ->group_exit_task != NULL is waiting for us.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:45 -07:00
Miao Xie c0ff7453bb cpuset,mm: fix no node to alloc memory when changing cpuset's mems
Before applying this patch, cpuset updates task->mems_allowed and
mempolicy by setting all new bits in the nodemask first, and clearing all
old unallowed bits later.  But in the way, the allocator may find that
there is no node to alloc memory.

The reason is that cpuset rebinds the task's mempolicy, it cleans the
nodes which the allocater can alloc pages on, for example:

(mpol: mempolicy)
	task1			task1's mpol	task2
	alloc page		1
	  alloc on node0? NO	1
				1		change mems from 1 to 0
				1		rebind task1's mpol
				0-1		  set new bits
				0	  	  clear disallowed bits
	  alloc on node1? NO	0
	  ...
	can't alloc page
	  goto oom

This patch fixes this problem by expanding the nodes range first(set newly
allowed bits) and shrink it lazily(clear newly disallowed bits).  So we
use a variable to tell the write-side task that read-side task is reading
nodemask, and the write-side task clears newly disallowed nodes after
read-side task ends the current memory allocation.

[akpm@linux-foundation.org: fix spello]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:57 -07:00
Ingo Molnar b257c14ceb Merge branch 'linus' into sched/core
Merge reason: merge the latest fixes, update to -rc4.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-15 09:36:16 +02:00
KAMEZAWA Hiroyuki a3a2e76c77 mm: avoid null-pointer deref in sync_mm_rss()
- We weren't zeroing p->rss_stat[] at fork()

- Consequently sync_mm_rss() was dereferencing tsk->mm for kernel
  threads and was oopsing.

- Make __sync_task_rss_stat() static, too.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15648

[akpm@linux-foundation.org: remove the BUG_ON(!mm->rss)]
Reported-by: Troels Liebe Bentsen <tlb@rapanden.dk>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
"Michael S. Tsirkin" <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:02 -07:00
Li Zefan 32bd7eb5a7 sched: Remove remaining USER_SCHED code
This is left over from commit 7c9414385e ("sched: Remove USER_SCHED"")

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <4BA9A05F.7010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:00 +02:00
Linus Torvalds 4e3eaddd14 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c
2010-03-13 14:43:01 -08:00
Thiago Farina f3abd4f953 kernel/exit.c: fix shadows sparse warning
kernel/exit.c:1183:26: warning: symbol 'status' shadows an earlier one
kernel/exit.c:1173:21: originally declared here

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:32 -08:00
KAMEZAWA Hiroyuki 34e55232e5 mm: avoid false sharing of mm_counter
Considering the nature of per mm stats, it's the shared object among
threads and can be a cache-miss point in the page fault path.

This patch adds per-thread cache for mm_counter.  RSS value will be
counted into a struct in task_struct and synchronized with mm's one at
events.

Now, in this patch, the event is the number of calls to handle_mm_fault.
Per-thread value is added to mm at each 64 calls.

 rough estimation with small benchmark on parallel thread (2threads) shows
 [before]
     4.5 cache-miss/faults
 [after]
     4.0 cache-miss/faults
 Anyway, the most contended object is mmap_sem if the number of threads grows.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:24 -08:00
Paul E. McKenney db1466b3e1 rcu: Use wrapper function instead of exporting tasklist_lock
Lockdep-RCU commit d11c563d exported tasklist_lock, which is not
a good thing.  This patch instead exports a function that uses
lockdep to check whether tasklist_lock is held.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
LKML-Reference: <1267631219-8713-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-04 11:46:14 +01:00
Paul E. McKenney d11c563dd2 sched: Use lockdep-based checking on rcu_dereference()
Update the rcu_dereference() usages to take advantage of the new
lockdep-based checking.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-6-git-send-email-paulmck@linux.vnet.ibm.com>
[ -v2: fix allmodconfig missing symbol export build failure on x86 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 10:34:26 +01:00
Oleg Nesterov 9cd80bbb07 do_wait() optimization: do not place sub-threads on task_struct->children list
Thanks to Roland who pointed out de_thread() issues.

Currently we add sub-threads to ->real_parent->children list.  This buys
nothing but slows down do_wait().

With this patch ->children contains only main threads (group leaders).
The only complication is that forget_original_parent() should iterate over
sub-threads by hand, and de_thread() needs another list_replace() when it
changes ->group_leader.

Henceforth do_wait_thread() can never see task_detached() && !EXIT_DEAD
tasks, we can remove this check (and we can unify do_wait_thread() and
ptrace_do_wait()).

This change can confuse the optimistic search in mm_update_next_owner(),
but this is fixable and minor.

Perhaps badness() and oom_kill_process() should be updated, but they
should be fixed in any case.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17 15:45:31 -08:00
Thomas Gleixner 1d61548254 sched: Convert pi_lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Alan Cox 5ec93d1154 tty: Move the leader test in disassociate
There are two call points, both want to check that tty->signal->leader is
set. Move the test into disassociate_ctty() as that will make locking
changes easier in a bit

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 15:18:08 -08:00
Linus Torvalds 6035ccd8e9 Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits)
  cfq-iosched: Do not access cfqq after freeing it
  block: include linux/err.h to use ERR_PTR
  cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
  blkio: Allow CFQ group IO scheduling even when CFQ is a module
  blkio: Implement dynamic io controlling policy registration
  blkio: Export some symbols from blkio as its user CFQ can be a module
  block: Fix io_context leak after failure of clone with CLONE_IO
  block: Fix io_context leak after clone with CLONE_IO
  cfq-iosched: make nonrot check logic consistent
  io controller: quick fix for blk-cgroup and modular CFQ
  cfq-iosched: move IO controller declerations to a header file
  cfq-iosched: fix compile problem with !CONFIG_CGROUP
  blkio: Documentation
  blkio: Wait on sync-noidle queue even if rq_noidle = 1
  blkio: Implement group_isolation tunable
  blkio: Determine async workload length based on total number of queues
  blkio: Wait for cfq queue to get backlogged if group is empty
  blkio: Propagate cgroup weight updation to cfq groups
  blkio: Drop the reference to queue once the task changes cgroup
  blkio: Provide some isolation between groups
  ...
2009-12-08 08:19:16 -08:00
Linus Torvalds 897e81bea1 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits)
  sched, cputime: Introduce thread_group_times()
  sched, cputime: Cleanups related to task_times()
  Revert "sched, x86: Optimize branch hint in __switch_to()"
  sched: Fix isolcpus boot option
  sched: Revert 498657a478
  sched, time: Define nsecs_to_jiffies()
  sched: Remove task_{u,s,g}time()
  sched: Introduce task_times() to replace task_{u,s}time() pair
  sched: Limit the number of scheduler debug messages
  sched.c: Call debug_show_all_locks() when dumping all tasks
  sched, x86: Optimize branch hint in __switch_to()
  sched: Optimize branch hint in context_switch()
  sched: Optimize branch hint in pick_next_task_fair()
  sched_feat_write(): Update ppos instead of file->f_pos
  sched: Sched_rt_periodic_timer vs cpu hotplug
  sched, kvm: Fix race condition involving sched_in_preempt_notifers
  sched: More generic WAKE_AFFINE vs select_idle_sibling()
  sched: Cleanup select_task_rq_fair()
  sched: Fix granularity of task_u/stime()
  sched: Fix/add missing update_rq_clock() calls
  ...
2009-12-05 15:30:49 -08:00
Louis Rilling b69f229206 block: Fix io_context leak after failure of clone with CLONE_IO
With CLONE_IO, parent's io_context->nr_tasks is incremented, but never
decremented whenever copy_process() fails afterwards, which prevents
exit_io_context() from calling IO schedulers exit functions.

Give a task_struct to exit_io_context(), and call exit_io_context() instead of
put_io_context() in copy_process() cleanup path.

Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:36:18 +01:00
Hidetoshi Seto 0cf55e1ec0 sched, cputime: Introduce thread_group_times()
This is a real fix for problem of utime/stime values decreasing
described in the thread:

   http://lkml.org/lkml/2009/11/3/522

Now cputime is accounted in the following way:

 - {u,s}time in task_struct are increased every time when the thread
   is interrupted by a tick (timer interrupt).

 - When a thread exits, its {u,s}time are added to signal->{u,s}time,
   after adjusted by task_times().

 - When all threads in a thread_group exits, accumulated {u,s}time
   (and also c{u,s}time) in signal struct are added to c{u,s}time
   in signal struct of the group's parent.

So {u,s}time in task struct are "raw" tick count, while
{u,s}time and c{u,s}time in signal struct are "adjusted" values.

And accounted values are used by:

 - task_times(), to get cputime of a thread:
   This function returns adjusted values that originates from raw
   {u,s}time and scaled by sum_exec_runtime that accounted by CFS.

 - thread_group_cputime(), to get cputime of a thread group:
   This function returns sum of all {u,s}time of living threads in
   the group, plus {u,s}time in the signal struct that is sum of
   adjusted cputimes of all exited threads belonged to the group.

The problem is the return value of thread_group_cputime(),
because it is mixed sum of "raw" value and "adjusted" value:

  group's {u,s}time = foreach(thread){{u,s}time} + exited({u,s}time)

This misbehavior can break {u,s}time monotonicity.
Assume that if there is a thread that have raw values greater
than adjusted values (e.g. interrupted by 1000Hz ticks 50 times
but only runs 45ms) and if it exits, cputime will decrease (e.g.
-5ms).

To fix this, we could do:

  group's {u,s}time = foreach(t){task_times(t)} + exited({u,s}time)

But task_times() contains hard divisions, so applying it for
every thread should be avoided.

This patch fixes the above problem in the following way:

 - Modify thread's exit (= __exit_signal()) not to use task_times().
   It means {u,s}time in signal struct accumulates raw values instead
   of adjusted values.  As the result it makes thread_group_cputime()
   to return pure sum of "raw" values.

 - Introduce a new function thread_group_times(*task, *utime, *stime)
   that converts "raw" values of thread_group_cputime() to "adjusted"
   values, in same calculation procedure as task_times().

 - Modify group's exit (= wait_task_zombie()) to use this introduced
   thread_group_times().  It make c{u,s}time in signal struct to
   have adjusted values like before this patch.

 - Replace some thread_group_cputime() by thread_group_times().
   This replacements are only applied where conveys the "adjusted"
   cputime to users, and where already uses task_times() near by it.
   (i.e. sys_times(), getrusage(), and /proc/<PID>/stat.)

This patch have a positive side effect:

 - Before this patch, if a group contains many short-life threads
   (e.g. runs 0.9ms and not interrupted by ticks), the group's
   cputime could be invisible since thread's cputime was accumulated
   after adjusted: imagine adjustment function as adj(ticks, runtime),
     {adj(0, 0.9) + adj(0, 0.9) + ....} = {0 + 0 + ....} = 0.
   After this patch it will not happen because the adjustment is
   applied after accumulated.

v2:
 - remove if()s, put new variables into signal_struct.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B162517.8040909@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02 17:32:40 +01:00
Hidetoshi Seto d5b7c78e97 sched: Remove task_{u,s,g}time()
Now all task_{u,s}time() pairs are replaced by task_times().
And task_gtime() is too simple to be an inline function.

Cleanup them all.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16D1.70902@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 12:59:20 +01:00
Hidetoshi Seto d180c5bcce sched: Introduce task_times() to replace task_{u,s}time() pair
Functions task_{u,s}time() are called in pair in almost all
cases.  However task_stime() is implemented to call task_utime()
from its inside, so such paired calls run task_utime() twice.

It means we do heavy divisions (div_u64 + do_div) twice to get
utime and stime which can be obtained at same time by one set
of divisions.

This patch introduces a function task_times(*tsk, *utime,
*stime) to retrieve utime and stime at once in better, optimized
way.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16AE.906@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 12:59:19 +01:00
Ingo Molnar 96200591a3 Merge branch 'tracing/hw-breakpoints' into perf/core
Conflicts:
	arch/x86/kernel/kprobes.c
	kernel/trace/Makefile

Merge reason: hw-breakpoints perf integration is looking
              good in testing and in reviews, plus conflicts
              are mounting up - so merge & resolve.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21 14:07:23 +01:00
Frederic Weisbecker 24f1e32c60 hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events
This patch rebase the implementation of the breakpoints API on top of
perf events instances.

Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..

The new layering is now made as follows:

       ptrace       kgdb      ftrace   perf syscall
          \          |          /         /
           \         |         /         /
                                        /
            Core breakpoint API        /
                                      /
                     |               /
                     |              /

              Breakpoints perf events

                     |
                     |

               Breakpoints PMU ---- Debug Register constraints handling
                                    (Part of core breakpoint API)
                     |
                     |

             Hardware debug registers

Reasons of this rewrite:

- Use the centralized/optimized pmu registers scheduling,
  implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
  events, exclusive/non-exclusive, tunable period, etc...)

Impact:

- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
  thread breakpoints references.

Todo (in the order):

- Support breakpoints perf counter events for perf tools (ie: implement
  perf_bpcounter_event())
- Support from perf tools

Changes in v2:

- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
  weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
  perf_event_attr.
- Separate core and arch specific headers, drop
  asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch

Changes in v3:

- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
  changes to kvm when we exit the guest and restore the bp registers
  to the host.

Changes in v4:

- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
  module
- Restore the breakpoints unconditionally on kvm guest exit:
  TIF_DEBUG_THREAD doesn't anymore cover every cases of running
  breakpoints and vcpu->arch.switch_db_regs might not always be
  set when the guest used debug registers.
  (Waiting for a reliable optimization)

Changes in v5:

- Split-up the asm-generic/hw-breakpoint.h moving to
  linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
  to host. We only want to restore the state if we have active
  breakpoints to the host, otherwise we don't care about messed-up
  address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c

Changes in v6:

- Fix wrong header inclusion in trace.h (triggered a build
  error with CONFIG_FTRACE_SELFTEST

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
2009-11-08 15:34:42 +01:00
Christian Borntraeger 0d0df599f1 connector: fix regression introduced by sid connector
Since commit 02b51df1b0 (proc connector: add
event for process becoming session leader) we have the following warning:

Badness at kernel/softirq.c:143
[...]
Krnl PSW : 0404c00180000000 00000000001481d4 (local_bh_enable+0xb0/0xe0)
[...]
Call Trace:
([<000000013fe04100>] 0x13fe04100)
 [<000000000048a946>] sk_filter+0x9a/0xd0
 [<000000000049d938>] netlink_broadcast+0x2c0/0x53c
 [<00000000003ba9ae>] cn_netlink_send+0x272/0x2b0
 [<00000000003baef0>] proc_sid_connector+0xc4/0xd4
 [<0000000000142604>] __set_special_pids+0x58/0x90
 [<0000000000159938>] sys_setsid+0xb4/0xd8
 [<00000000001187fe>] sysc_noemu+0x10/0x16
 [<00000041616cb266>] 0x41616cb266

The warning is
--->    WARN_ON_ONCE(in_irq() || irqs_disabled());

The network code must not be called with disabled interrupts but
sys_setsid holds the tasklist_lock with spinlock_irq while calling the
connector.

After a discussion we agreed that we can move proc_sid_connector from
__set_special_pids to sys_setsid.

We also agreed that it is sufficient to change the check from
task_session(curr) != pid into err > 0, since if we don't change the
session, this means we were already the leader and return -EPERM.

One last thing:
There is also daemonize(), and some people might want to get a
notification in that case. Since daemonize() is only needed if a user
space does kernel_thread this does not look important (and there seems
to be no consensus if this connector should be called in daemonize). If
we really want this, we can add proc_sid_connector to daemonize() in an
additional patch (Scott?)

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Scott James Remnant <scott@ubuntu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:25 -07:00