Commit Graph

835614 Commits

Author SHA1 Message Date
Andreas Gruenbacher d0a22a4b03 gfs2: Fix iomap write page reclaim deadlock
Since commit 64bc06bb32 ("gfs2: iomap buffered write support"), gfs2 is doing
buffered writes by starting a transaction in iomap_begin, writing a range of
pages, and ending that transaction in iomap_end.  This approach suffers from
two problems:

  (1) Any allocations necessary for the write are done in iomap_begin, so when
  the data aren't journaled, there is no need for keeping the transaction open
  until iomap_end.

  (2) Transactions keep the gfs2 log flush lock held.  When
  iomap_file_buffered_write calls balance_dirty_pages, this can end up calling
  gfs2_write_inode, which will try to flush the log.  This requires taking the
  log flush lock which is already held, resulting in a deadlock.

Fix both of these issues by not keeping transactions open from iomap_begin to
iomap_end.  Instead, start a small transaction in page_prepare and end it in
page_done when necessary.

Reported-by: Edwin Török <edvin.torok@citrix.com>
Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2019-05-07 23:39:15 +02:00
Abhi Das 8f91821990 gfs2: fix race between gfs2_freeze_func and unmount
As part of the freeze operation, gfs2_freeze_func() is left blocking
on a request to hold the sd_freeze_gl in SH. This glock is held in EX
by the gfs2_freeze() code.

A subsequent call to gfs2_unfreeze() releases the EXclusively held
sd_freeze_gl, which allows gfs2_freeze_func() to acquire it in SH and
resume its operation.

gfs2_unfreeze(), however, doesn't wait for gfs2_freeze_func() to complete.
If a umount is issued right after unfreeze, it could result in an
inconsistent filesystem because some journal data (statfs update) isn't
written out.

Refer to commit 24972557b1 for a more detailed explanation of how
freeze/unfreeze work.

This patch causes gfs2_unfreeze() to wait for gfs2_freeze_func() to
complete before returning to the user.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher fbb27873f2 gfs2: Rename gfs2_trans_{add_unrevoke => remove_revoke}
Rename gfs2_trans_add_unrevoke to gfs2_trans_remove_revoke: there is no
such thing as an "unrevoke" object; all this function does is remove
existing revoke objects plus some bookkeeping.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher a5b1d3fc50 gfs2: Rename sd_log_le_{revoke,ordered}
Rename sd_log_le_revoke to sd_log_revokes and sd_log_le_ordered to
sd_log_ordered: not sure what le stands for here, but it doesn't add
clarity, and if it stands for list entry, it's actually confusing as
those are both list heads but not list entries.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher 32ac43f6a4 gfs2: Remove unnecessary extern declarations
Make log operations statuc; they are only used locally.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher ce895cf15a gfs2: Remove misleading comments in gfs2_evict_inode
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Bob Peterson 73118ca8ba gfs2: Replace gl_revokes with a GLF flag
The gl_revokes value determines how many outstanding revokes a glock has
on the superblock revokes list; this is used to avoid unnecessary log
flushes.  However, gl_revokes is only ever tested for being zero, and it's
only decremented in revoke_lo_after_commit, which removes all revokes
from the list, so we know that the gl_revoke values of all the glocks on
the list will reach zero.  Therefore, we can replace gl_revokes with a
bit flag. This saves an atomic counter in struct gfs2_glock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher 9287c6452d gfs2: Fix occasional glock use-after-free
This patch has to do with the life cycle of glocks and buffers.  When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list.  Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.

So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke.  At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node.  This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.

Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list.  The
evict decremented the glock reference count to zero, which allowed the
glock to be freed.  After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.

This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.

Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2019-05-07 23:39:14 +02:00
Bob Peterson 7c70b89695 gfs2: clean_journal improperly set sd_log_flush_head
This patch fixes regressions in 588bff95c9.
Due to that patch, function clean_journal was setting the value of
sd_log_flush_head, but that's only valid if it is replaying the node's
own journal. If it's replaying another node's journal, that's completely
wrong and will lead to multiple problems. This patch tries to clean up
the mess by passing the value of the logical journal block number into
gfs2_write_log_header so the function can treat non-owned journals
generically. For the local journal, the journal extent map is used for
best performance. For other nodes from other journals, new function
gfs2_lblk_to_dblk is called to figure it out using gfs2_iomap_get.

This patch also tries to establish more consistency when passing journal
block parameters by changing several unsigned int types to a consistent
u32.

Fixes: 588bff95c9 ("GFS2: Reduce code redundancy writing log headers")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:04 +02:00
Pierre-Louis Bossart d4c2ccdb58 ALSA: hda/intel: add CometLake PCI IDs
Add PCI IDs for LP and H skews.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-07 22:47:26 +02:00
Linus Torvalds f678d6da74 Char/Misc patches for 5.2-rc1 - part 2
Here is the "real" big set of char/misc driver patches for 5.2-rc1
 
 Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups
 
 Feels like this tree is getting to be a dumping ground of "small driver
 subsystems" these days.  Which is fine with me, if it makes things
 easier for those subsystem maintainers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
 f6V3MvRffg4qUp3cGbU=
 =R37j
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...
2019-05-07 13:39:22 -07:00
Ross Lagerwall 7881ef3f33 gfs2: Fix lru_count going negative
Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:

vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
    negative objects to delete nr=-1

This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
   decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
   lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
   incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
   to the lru list but the lru_count has still decreased by one.

Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 22:33:53 +02:00
Andreas Gruenbacher 71921ef859 gfs2: Fix loop in gfs2_rbm_find (v2)
Fix the resource group wrap-around logic in gfs2_rbm_find that commit
e579ed4f44 broke.  The bug can lead to unnecessary repeated scanning of the
same bitmaps; there is a risk that future changes will turn this into an
endless loop.

This is an updated version of commit 2d29f6b96d ("gfs2: Fix loop in
gfs2_rbm_find") which ended up being reverted because it introduced a
performance regression in iozone (see commit e74c98ca2d).  Changes since v1:

 - Simplify the wrap-around logic.

 - Handle the case where each resource group only has a single bitmap block
   (small filesystem).

 - Update rd_extfail_pt whenever we scan the entire bitmap, even when we don't
   start the scan at the very beginning of the bitmap.

Fixes: e579ed4f44 ("GFS2: Introduce rbm field bii")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 22:33:44 +02:00
Linus Torvalds 2310673c3c Char/Misc patches for 5.2-rc1 - part 1
This is the first pull request for the char/misc driver tree for 5.2-rc1
 
 This contains only a small number of bugfixes that would have gone to
 you for 5.1-rc8 if that had happened, but instead I let them sit in
 linux-next for an extra week just "to be sure".
 
 The "big" patch here is for hyper-v, fixing a bug in their sysfs files
 that could cause big problems.  The others are all small fixes,
 resolving reported issues that showed up in 5.1-rcs, plus some odd
 'static' cleanups for the phy drivers that really should have waited for
 -rc1.  Most of these are tagged for the stable trees, so 5.1 will pick
 them up.
 
 All of these have been in linux-next for a while, with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHCBQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykBdgCdHD/BEKQrdhFsyfNdqlqF9wbrfZoAoLEFGwCZ
 1TMdkE1qIcSr+BgOyI8a
 =croh
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 1 from Greg KH:
 "This contains only a small number of bugfixes that would have gone to
  you for 5.1-rc8 if that had happened, but instead I let them sit in
  linux-next for an extra week just "to be sure".

  The "big" patch here is for hyper-v, fixing a bug in their sysfs files
  that could cause big problems. The others are all small fixes,
  resolving reported issues that showed up in 5.1-rcs, plus some odd
  'static' cleanups for the phy drivers that really should have waited
  for -rc1. Most of these are tagged for the stable trees, so 5.1 will
  pick them up.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fixed rts5260 power saving parameter and sd glitch
  binder: take read mode of mmap_sem in binder_alloc_free_page()
  intel_th: pci: Add Comet Lake support
  stm class: Fix channel bitmap on 32-bit systems
  stm class: Fix channel free in stm output free path
  phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
  phy: fix platform_no_drv_owner.cocci warnings
  phy: mapphone-mdm6600: add gpiolib dependency
  phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
  phy: allwinner: allow compile testing
  phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
  phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
  phy: phy-twl4030-usb: Fix cable state handling
  Drivers: hv: vmbus: Remove the undesired put_cpu_ptr() in hv_synic_cleanup()
  Drivers: hv: vmbus: Fix race condition with new ring_buffer_info mutex
  Drivers: hv: vmbus: Set ring_info field to 0 and remove memset
  Drivers: hv: vmbus: Refactor chan->state if statement
  Drivers: hv: vmbus: Expose monitor data only when monitor pages are used
2019-05-07 13:33:31 -07:00
Linus Torvalds e0dccbdf5a Staging / IIO driver patches for 5.2-rc1
Here is the big staging and iio driver update for 5.2-rc1.
 
 Lots of tiny fixes all over the staging and IIO driver trees here, along
 with some new IIO drivers.
 
 Also we ended up deleting two drivers, making this pull request remove a
 few hundred thousand lines of code, always a nice thing to see.  Both of
 the drivers removed have been replaced with "real" drivers in their
 various subsystem directories, and they will be coming to you from those
 locations during this merge window.
 
 There are some core vt/selection changes in here, that was due to some
 cleanups needed for the speakup fixes.  Those have all been acked by the
 various subsystem maintainers (i.e. me), so those are ok.
 
 We also added a few new drivers, for some odd hardware, giving new
 developers plenty to work on with basic coding style cleanups to come in
 the near future.
 
 Other than that, nothing unusual here.
 
 All of these have been in linux-next for a while with no reported
 issues, other than an odd gcc warning for one of the new drivers that
 should be fixed up soon.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHGMQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynQRACgwtlC6DFsEFwCplYxQXP5uzuIVTMAoJ61xzC0
 Qim7K31f5ulaa3GJuhzo
 =zEY5
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and iio driver update for 5.2-rc1.

  Lots of tiny fixes all over the staging and IIO driver trees here,
  along with some new IIO drivers.

  The "counter" subsystem was added in here as well, as it is needed by
  the IIO drivers and subsystem.

  Also we ended up deleting two drivers, making this pull request remove
  a few hundred thousand lines of code, always a nice thing to see. Both
  of the drivers removed have been replaced with "real" drivers in their
  various subsystem directories, and they will be coming to you from
  those locations during this merge window.

  There are some core vt/selection changes in here, that was due to some
  cleanups needed for the speakup fixes. Those have all been acked by
  the various subsystem maintainers (i.e. me), so those are ok.

  We also added a few new drivers, for some odd hardware, giving new
  developers plenty to work on with basic coding style cleanups to come
  in the near future.

  Other than that, nothing unusual here.

  All of these have been in linux-next for a while with no reported
  issues, other than an odd gcc warning for one of the new drivers that
  should be fixed up soon"

[ I fixed up the warning myself  - Linus ]

* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
  staging: kpc2000: kpc_spi: Fix build error for {read,write}q
  Staging: rtl8192e: Remove extra space before break statement
  Staging: rtl8192u: ieee80211: Fix if-else indentation warning
  Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
  staging: most: cdev: fix chrdev_region leak in mod_exit
  staging: wlan-ng: Fix improper SPDX comment style
  staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
  staging: vc04_services: bcm2835-camera: Compress two lines into one line
  staging: rtl8723bs: core: Use !x in place of NULL comparison.
  staging: rtl8723bs: core: Prefer using the BIT Macro.
  staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
  staging: kpc2000: fix up build problems with readq()
  staging: rtlwifi: move remaining phydm .h files
  staging: rtlwifi: strip down phydm .h files
  staging: rtlwifi: delete the staging driver
  staging: fieldbus: anybus-s: rename bus id field to avoid confusion
  staging: fieldbus: anybus-s: keep device bus id in bus endianness
  Staging: sm750fb: Change *array into *const array
  staging: rtl8192u: ieee80211: Fix spelling mistake
  staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
  ...
2019-05-07 13:31:29 -07:00
Linus Torvalds cf482a49af Driver core/kobject patches for 5.2-rc1
Here is the "big" set of driver core patches for 5.2-rc1
 
 There are a number of ACPI patches in here as well, as Rafael said they
 should go through this tree due to the driver core changes they
 required.  They have all been acked by the ACPI developers.
 
 There are also a number of small subsystem-specific changes in here, due
 to some changes to the kobject core code.  Those too have all been acked
 by the various subsystem maintainers.
 
 As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
 8XCYcif2RxjtdJWXbjdm
 =/rLh
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...
2019-05-07 13:01:40 -07:00
Linus Torvalds 01e5d1830c MMC core:
- Fix a few memoryleaks
  - Minor improvements to the card initialization sequence
  - Partially support sleepy GPIO controllers for pwrseq eMMC
 
 MMC host:
  - alcor: Work with multiple-entry sglists
  - alcor: Enable DMA for writes
  - meson-gx: Improve tuning support
  - meson-gx: Avoid clock glitch when switching to DDR modes
  - meson-gx: Disable unreliable HS400 mode
  - mmci: Minor updates for support of HW busy detection
  - mmci: Support data transfers for the stm32_sdmmc variant
  - mmci: Restructure code to better support different variants
  - mtk-sd: Add support for version found on MT7620 family SOCs
  - mtk-sd: Add support for the MT8516 version
  - mtk-sd: Add Chaotian Jing as the maintainer
  - sdhci: Reorganize request-code to convert from tasklet to workqueue
  - sdhci_am654: Stabilize support for lower speed modes
  - sdhci-esdhc-imx: Add HS400 support for iMX7ULP
  - sdhci-esdhc-imx: Add support for iMX7ULP version
  - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
  - sdhci-of-esdhc: Add support for the ls1028a version
  - sdhci-of-esdhc: Several fixups for errata
  - sdhci-pci: Fix BYT OCP setting
  - sdhci-pci: Add support for Intel CML
  - sdhci-tegra: Add support for system suspend/resume
  - sdhci-tegra: Add CQE support for Tegra186 WAR
  - sdhci-tegra: Add support for Tegra194
  - sdhci-tegra: Update HW tuning process
 
 MEMSTICK:
  - I volunteered to help as a maintainer for the memstick subsystem, which is
    reflected by an update to the MAINTAINERS file. Changes are funneled through
    my MMC git and we will use the linux-mmc mailing list.
 
 MEMSTICK host:
  - A few minor cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAlzRJJsXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmhixAArz1QWF0LlpiHTqop0pPgzbKj
 Z3LwQ/iyawPWpmU4SckcuBpSNTQ47I22Mzx7VPXeRyJt84T8MDlHfgA5Kc/VbRHf
 G+hSUYpcw63xNnzuWy54QxsW03PgjcSKe40bOsbGsKLhm3DAY9uuWiJnqCX7hIrY
 ALn3uQgeWEfJkUGwctvqe6883PBRNeu6Rwgb0IFN+rdIGBIVf6zAkTceK6m5MDoQ
 iJIj5tq+z4excDQryeEpFM3kcI8lm7Eoyb35DhWVeji0sTVXgQINbkJMmFV+O2bl
 hJMkpv5Zn2tqT6485McQuSdvLlTBi9FD7QJQQOgekgRUaq/FPS0N5dnhD2vK5kLs
 cLOcb9LAXeHu/Xzos2aQ2Km7y2ezXH5bLda1QLeoizKwf0b7p+qtQN32cGHEKkEN
 hZPTsiJiu5wgkHdkoAFp7yxf9H0TZW3rYgL0zmj31VXNChZ4oyEAYPUoUGuJbm6h
 7WdXvAw19MkDl4eCHkUYqr8nwRgoBDEUYjjcc8ObsoGM1zgF3JR38Ke4dqAQZAI1
 8xGI46tboQ3bKVC0uai7tO4DscJ1X/Mu5tUdk2So1F38vZ/fJFky/gnzZRoQURgY
 JLB/CTbRjfpaCm3ny5MtsAGvz0AkEWbOVqOArzAMpVUZhd+pRhdOtTWjrTCUKfrf
 WRPjbDiIDN8EFLrKVXU=
 =Ompt
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a few memoryleaks
   - Minor improvements to the card initialization sequence
   - Partially support sleepy GPIO controllers for pwrseq eMMC

  MMC host:
   - alcor: Work with multiple-entry sglists
   - alcor: Enable DMA for writes
   - meson-gx: Improve tuning support
   - meson-gx: Avoid clock glitch when switching to DDR modes
   - meson-gx: Disable unreliable HS400 mode
   - mmci: Minor updates for support of HW busy detection
   - mmci: Support data transfers for the stm32_sdmmc variant
   - mmci: Restructure code to better support different variants
   - mtk-sd: Add support for version found on MT7620 family SOCs
   - mtk-sd: Add support for the MT8516 version
   - mtk-sd: Add Chaotian Jing as the maintainer
   - sdhci: Reorganize request-code to convert from tasklet to workqueue
   - sdhci_am654: Stabilize support for lower speed modes
   - sdhci-esdhc-imx: Add HS400 support for iMX7ULP
   - sdhci-esdhc-imx: Add support for iMX7ULP version
   - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
   - sdhci-of-esdhc: Add support for the ls1028a version
   - sdhci-of-esdhc: Several fixups for errata
   - sdhci-pci: Fix BYT OCP setting
   - sdhci-pci: Add support for Intel CML
   - sdhci-tegra: Add support for system suspend/resume
   - sdhci-tegra: Add CQE support for Tegra186 WAR
   - sdhci-tegra: Add support for Tegra194
   - sdhci-tegra: Update HW tuning process

  MEMSTICK:
   - I volunteered to help as a maintainer for the memstick subsystem,
     which is reflected by an update to the MAINTAINERS file. Changes
     are funneled through my MMC git and we will use the linux-mmc
     mailing list.

  MEMSTICK host:
   - A few minor cleanups"

* tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits)
  mmc: sdhci-pci: Fix BYT OCP setting
  dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
  mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
  mmc: mtk-sd: select REGULATOR
  mmc: mtk-sd: enable internal card-detect logic.
  mmc: mtk-sd: add support for config found in mt7620 family SOCs.
  mmc: mtk-sd: don't hard-code interrupt trigger type
  mmc: core: Fix tag set memory leak
  dt-bindings: mmc: Add support for MT8516 to mtk-sd
  mmc: mmci: Prevent polling for busy detection in IRQ context
  mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
  mmc: usdhi6rol0: mark expected switch fall-throughs
  mmc: core: Verify SD bus width
  mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
  mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
  dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
  mmc: meson-gx: add signal resampling tuning
  mmc: meson-gx: remove Rx phase tuning
  mmc: meson-gx: avoid clock glitch when switching to DDR modes
  mmc: meson-gx: disable HS400
  ...
2019-05-07 12:56:19 -07:00
Linus Torvalds b4b52b881c Wimplicit-fallthrough patches for 5.2-rc1
Hi Linus,
 
 This is my very first pull-request.  I've been working full-time as
 a kernel developer for more than two years now. During this time I've
 been fixing bugs reported by Coverity all over the tree and, as part
 of my work, I'm also contributing to the KSPP. My work in the kernel
 community has been supervised by Greg KH and Kees Cook.
 
 OK. So, after the quick introduction above, please, pull the following
 patches that mark switch cases where we are expecting to fall through.
 These patches are part of the ongoing efforts to enable -Wimplicit-fallthrough.
 They have been ignored for a long time (most of them more than 3 months,
 even after pinging multiple times), which is the reason why I've created
 this tree. Most of them have been baking in linux-next for a whole development
 cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails
 going out for newly introduced code that triggers -Wimplicit-fallthrough
 to avoid gaining more of these cases while we work to remove the ones
 that are already present.
 
 I'm happy to let you know that we are getting close to completing this
 work.  Currently, there are only 32 of 2311 of these cases left to be
 addressed in linux-next.  I'm auditing every case; I take a look into
 the code and analyze it in order to determine if I'm dealing with an
 actual bug or a false positive, as explained here:
 
 https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
 
 While working on this, I've found and fixed the following missing
 break/return bugs, some of them introduced more than 5 years ago:
 
 84242b82d8
 7850b51b6c
 5e420fe635
 09186e5034
 b5be853181
 7264235ee7
 cc5034a5d2
 479826cc86
 5340f23df8
 df997abeeb
 2f10d82373
 307b00c5e6
 5d25ff7a54
 a7ed5b3e7d
 c24bfa8f21
 ad0eaee619
 9ba8376ce1
 dc586a60a1
 a8e9b186f1
 4e57562b48
 60747828ea
 c5b974bee9
 cc44ba9116
 2c930e3d0a
 
 Once this work is finish, we'll be able to universally enable
 "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
 entering the kernel again.
 
 Thanks
 
 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAlzQR2IACgkQRwW0y0cG
 2zEJbQ//X930OcBtT/9DRW4XL1Jeq0Mjssz/GLX2Vpup5CwwcTROG65no80Zezf/
 yQRWnUjGX0OBv/fmUK32/nTxI/7k7NkmIXJHe0HiEF069GEENB7FT6tfDzIPjU8M
 qQkB8NsSUWJs3IH6BVynb/9MGE1VpGBDbYk7CBZRtRJT1RMM+3kQPucgiZMgUBPo
 Yd9zKwn4i/8tcOCli++EUdQ29ukMoY2R3qpK4LftdX9sXLKZBWNwQbiCwSkjnvJK
 I6FDiA7RaWH2wWGlL7BpN5RrvAXp3z8QN/JZnivIGt4ijtAyxFUL/9KOEgQpBQN2
 6TBRhfTQFM73NCyzLgGLNzvd8awem1rKGSBBUvevaPbgesgM+Of65wmmTQRhFNCt
 A7+e286X1GiK3aNcjUKrByKWm7x590EWmDzmpmICxNPdt5DHQ6EkmvBdNjnxCMrO
 aGA24l78tBN09qN45LR7wtHYuuyR0Jt9bCmeQZmz7+x3ICDHi/+Gw7XPN/eM9+T6
 lZbbINiYUyZVxOqwzkYDCsdv9+kUvu3e4rPs20NERWRpV8FEvBIyMjXAg6NAMTue
 K+ikkyMBxCvyw+NMimHJwtD7ho4FkLPcoeXb2ZGJTRHixiZAEtF1RaQ7dA05Q/SL
 gbSc0DgLZeHlLBT+BSWC2Z8SDnoIhQFXW49OmuACwCUC68NHKps=
 =k30z
 -----END PGP SIGNATURE-----

Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
 "Mark switch cases where we are expecting to fall through.

  This is part of the ongoing efforts to enable -Wimplicit-fallthrough.

  Most of them have been baking in linux-next for a whole development
  cycle. And with Stephen Rothwell's help, we've had linux-next
  nag-emails going out for newly introduced code that triggers
  -Wimplicit-fallthrough to avoid gaining more of these cases while we
  work to remove the ones that are already present.

  We are getting close to completing this work. Currently, there are
  only 32 of 2311 of these cases left to be addressed in linux-next. I'm
  auditing every case; I take a look into the code and analyze it in
  order to determine if I'm dealing with an actual bug or a false
  positive, as explained here:

      https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/

  While working on this, I've found and fixed the several missing
  break/return bugs, some of them introduced more than 5 years ago.

  Once this work is finished, we'll be able to universally enable
  "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
  entering the kernel again"

* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
  memstick: mark expected switch fall-throughs
  drm/nouveau/nvkm: mark expected switch fall-throughs
  NFC: st21nfca: Fix fall-through warnings
  NFC: pn533: mark expected switch fall-throughs
  block: Mark expected switch fall-throughs
  ASN.1: mark expected switch fall-through
  lib/cmdline.c: mark expected switch fall-throughs
  lib: zstd: Mark expected switch fall-throughs
  scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
  scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
  scsi: ppa: mark expected switch fall-through
  scsi: osst: mark expected switch fall-throughs
  scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
  scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
  scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
  scsi: imm: mark expected switch fall-throughs
  scsi: csiostor: csio_wr: mark expected switch fall-through
  ...
2019-05-07 12:48:10 -07:00
Linus Torvalds 2d60d96b6f compiler-based memory initialization
- Consolidate memory initialization Kconfigs (Kees)
 - Implement support for Clang's stack variable auto-init (Alexander)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlzQafUWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJrTfEAChweGM23u8i0vOgGM4fYAXr9di
 THoKkgEGgQJJaArgElEuZgwos8uhH2rGhQ2zcY38ZFA20byBZ/G8jFNXNuzFgUyQ
 6p5DUU2P2qam+v/cXvFqBqbXg4VzmlwR6Lzi9DHZ3XC41kz5YUWqHTq3md1uCU82
 V2Z0V3xF7Zvjx14V42UzEqW66l3dUrYPOFSJVTCMC5vaJvov3gFjStRkYuSzYg+N
 1ns7SdT8sQvXeAoj1VSeunNuv8iCVytFWC6f0cIs3iCt9nD/IYk1d9Zl6MAqive2
 5sKDhUKBzg03xB1rztDmxZKAyN3YYoZFfJr3PruSvUiMxYYtX3IMvKFI257RQl8J
 WYP5qa0kHHM1uel5kS4fckzAv+oqNnnXgdSy5ajc1YFcdBxwiy6DfvBjk843DyU/
 +OLb1wh5Uz6ICg6GILgVoL5nZinnj73zgj78bfRemiy1j7LZVtkX0EDAwIJxE2U9
 SYYeEvUu91jNbkE9ugu8RXmXv1QctOuiBr70VLupVu/a7AJij6Cq8Ox9uge25DRF
 XnuVjXCpMdx6p6i1kaNXZtxREK4at0J2CCIqGyzFpRgym2OpyJBIgVEWDMsfof0w
 HOKUpbp7TytVdRoEWcwU32oGBa/e0PbJ2KSNK0t+5bKeIOTxFJf1qeWwaWXu3JQE
 DRYx7/sVHjGUXsSNeg==
 =i0Gi
 -----END PGP SIGNATURE-----

Merge tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull compiler-based variable initialization updates from Kees Cook:
 "This is effectively part of my gcc-plugins tree, but as this adds some
  Clang support, it felt weird to still call it "gcc-plugins". :)

  This consolidates Kconfig for the existing stack variable
  initialization (via structleak and stackleak gcc plugins) and adds
  Alexander Potapenko's support for Clang's new similar functionality.

  Summary:

   - Consolidate memory initialization Kconfigs (Kees)

   - Implement support for Clang's stack variable auto-init (Alexander)"

* tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  security: Implement Clang's stack initialization
  security: Move stackleak config to Kconfig.hardening
  security: Create "kernel hardening" config area
2019-05-07 12:44:49 -07:00
YueHaibing a3147770be cxgb4: Fix error path in cxgb4_init_module
BUG: unable to handle kernel paging request at ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086
RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278
RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240
RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260
R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78
FS:  00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0
Call Trace:
 register_inet6addr_notifier+0x13/0x20
 cxgb4_init_module+0x6c/0x1000 [cxgb4
 ? 0xffffffffa01d7000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.

Fixes: b5a02f503c ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:41:48 -07:00
Heiner Kallweit 23bfaa5940 net: phy: improve pause mode reporting in phy_print_status
So far we report symmetric pause only, and we don't consider the local
pause capabilities. Let's properly consider local and remote
capabilities, and report also asymmetric pause.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:40:39 -07:00
Maxime Chevallier 822dd046d7 dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
The phy_mode "2000base-x" is actually supposed to be "1000base-x", even
though the commit title of the original patch says otherwise.

Fixes: 55601a8806 ("net: phy: Add 2000base-x, 2500base-x and rxaui modes")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:30:29 -07:00
Linus Torvalds eac7078a0f pidfd patches for v5.2-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE7btrcuORLb1XUhEwjrBW1T7ssS0FAlzReuoACgkQjrBW1T7s
 sS1uvBAA16pgnhRNxNTrp3LYft6lUWmF4n0baOTVtQNLhPjpwaOxHIrCBugkQCJB
 QcQ9IQSOvIkaEW0XAQoPBaeLviiKhHOFw1Fv89OtW6xUidSfSV15lcI9f1F2pCm2
 4yCL/8XvL6M0NhxiwftJAkWOXeDNLfjFnLwyLxBfgg3EeyqMgUB8raeosEID0ORR
 gm2/g8DYS2r+KNqM/F4xvMSgabfi2bGk+8BtAaVnftJfstpRNrqKwWnSK3Wspj1l
 5gkb8gSsiY6ns3V6RgNHrFlhevFg8V+VjcJt7FR+aUEjOkcoiXas/PhvamMzdsn/
 FM1F/A0pM8FSybIUClhnnnxNPc+p8ZN/71YQAPs+Mnh3xvbtKea2lkhC+Xv4OpK3
 edutSZWFaiIery82Rk00H3vqiSF1+kRIXSpZSS4mElk4FsVljkyH+nSP7rbmE2MR
 EQe+kKnZl8QzWrVbnODC+EVvvVpA2bXDvENJmvKqus+t2G0OdV7Iku3F5E3KjF8k
 S5RRV1zuBF3ugqnjmYrVmJtpEA8mxClmqvg6okru+qW6ngO5oOgVpPLjWn1CXcdj
 wcuQ6Pe1QwAHS54e9WSWgCHVssLvm9nCdCqypdNaoyGWmbTWntwlrY7Y0JUQnAbB
 6/G/DQQiCWY9y8bMZlTEydhIpgcsdROuPYv+oHF5+eQQthsWwHc=
 =LH11
 -----END PGP SIGNATURE-----

Merge tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd updates from Christian Brauner:
 "This patchset makes it possible to retrieve pidfds at process creation
  time by introducing the new flag CLONE_PIDFD to the clone() system
  call. Linus originally suggested to implement this as a new flag to
  clone() instead of making it a separate system call.

  After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
  parent_tidptr argument. This means we can give back the associated pid
  and the pidfd at the same time. Access to process metadata information
  thus becomes rather trivial.

  As has been agreed, CLONE_PIDFD creates file descriptors based on
  anonymous inodes similar to the new mount api. They are made
  unconditional by this patchset as they are now needed by core kernel
  code (vfs, pidfd) even more than they already were before (timerfd,
  signalfd, io_uring, epoll etc.). The core patchset is rather small.
  The bulky looking changelist is caused by David's very simple changes
  to Kconfig to make anon inodes unconditional.

  A pidfd comes with additional information in fdinfo if the kernel
  supports procfs. The fdinfo file contains the pid of the process in
  the callers pid namespace in the same format as the procfs status
  file, i.e. "Pid:\t%d".

  To remove worries about missing metadata access this patchset comes
  with a sample/test program that illustrates how a combination of
  CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
  access to process metadata through /proc/<pid>.

  Further work based on this patchset has been done by Joel. His work
  makes pidfds pollable. It finished too late for this merge window. I
  would prefer to have it sitting in linux-next for a while and send it
  for inclusion during the 5.3 merge window"

* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  samples: show race-free pidfd metadata access
  signal: support CLONE_PIDFD with pidfd_send_signal
  clone: add CLONE_PIDFD
  Make anon_inodes unconditional
2019-05-07 12:30:24 -07:00
Harini Katakam 0504453139 net: macb: Change interrupt and napi enable order in open
Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY

Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled

With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.

Fixes: ae1f2a56d2 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:26:40 -07:00
Esben Haabendal 5db9c74042 net: ll_temac: Improve error message on error IRQ
The channel status register value can be very helpful when debugging
SDMA problems.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:24:45 -07:00
Pieter Jansen van Vuuren d6787147e1 net/sched: remove block pointer from common offload structure
Based on feedback from Jiri avoid carrying a pointer to the tcf_block
structure in the tc_cls_common_offload structure. Instead store
a flag in driver private data which indicates if offloads apply
to a shared block at block binding time.

Suggested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:23:40 -07:00
David S. Miller 2e7ae67b5f Merge branch 'of_get_mac_address-ERR_PTR-fixes'
Petr Štetiar says:

====================
of_get_mac_address ERR_PTR fixes

this patch series is an attempt to fix the mess, I've somehow managed to
introduce.

First patch in this series is defacto v5 of the previous 05/10 patch in the
series, but since the v4 of this 05/10 patch wasn't picked up by the
patchwork for some unknown reason, this patch wasn't applied with the other
9 patches in the series, so I'm resending it as a separate patch of this
fixup series again.

Second patch is a result of this rebase against net-next tree, where I was
checking again all current users of of_get_mac_address and found out, that
there's new one in DSA, so I've converted this user to the new ERR_PTR
encoded error value as well.

Third patch which was sent as v5 wasn't considered for merge, but I still
think, that we need to check for possible NULL value, thus current IS_ERR
check isn't sufficient and we need to use IS_ERR_OR_NULL instead.

Fourth patch fixes warning reported by kbuild test robot.
====================

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:22:47 -07:00
Petr Štetiar a51645f70f net: ethernet: support of_get_mac_address new ERR_PTR error
There was NVMEM support added to of_get_mac_address, so it could now
return ERR_PTR encoded error values, so we need to adjust all current
users of of_get_mac_address to this new fact.

While at it, remove superfluous is_valid_ether_addr as the MAC address
returned from of_get_mac_address is always valid and checked by
is_valid_ether_addr anyway.

Fixes: d01f449c00 ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:22:47 -07:00
Petr Štetiar 5503a6889f net: usb: smsc: fix warning reported by kbuild test robot
This patch fixes following warning reported by kbuild test robot:

 In function ‘memcpy’,
     inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3,
     inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2:
 ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull]
   return __builtin_memcpy(p, q, size);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’:
 ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’

I've replaced the offending memcpy with ether_addr_copy, because I'm
100% sure, that of_get_mac_address can't return NULL as it returns valid
pointer or ERR_PTR encoded value, nothing else.

I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this
would make the warning disappear also, but it would be confusing to
check for impossible return value just to make a compiler happy.

Fixes: adfb3cb2c5 ("net: usb: support of_get_mac_address new ERR_PTR error")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:22:47 -07:00
Petr Štetiar da48be3373 staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
Commit 284eb16068 ("staging: octeon-ethernet: support
of_get_mac_address new ERR_PTR error") has introduced checking for
ERR_PTR encoded error value from of_get_mac_address with IS_ERR macro,
which is not sufficient in this case, as the mac variable is set to NULL
initialy and if the kernel is compiled without DT support this NULL
would get passed to IS_ERR, which would lead to the wrong decision and
would pass that NULL pointer and invalid MAC address further.

Fixes: 284eb16068 ("staging: octeon-ethernet: support of_get_mac_address new ERR_PTR error")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:22:47 -07:00
Petr Štetiar 4974f9b7e0 net: dsa: support of_get_mac_address new ERR_PTR error
There was NVMEM support added to of_get_mac_address, so it could now
return ERR_PTR encoded error values, so we need to adjust all current
users of of_get_mac_address to this new fact.

While at it, remove superfluous is_valid_ether_addr as the MAC address
returned from of_get_mac_address is always valid and checked by
is_valid_ether_addr anyway.

Fixes: d01f449c00 ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:22:47 -07:00
Nathan Chancellor 8e8673a227 net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
Clang warns:

drivers/net/dsa/sja1105/sja1105_ethtool.c:316:39: warning: suggest
braces around initialization of subobject [-Wmissing-braces]
        struct sja1105_port_status status = {0};
                                             ^
                                             {}
1 warning generated.

One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers[1][2], who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version[3], and properly initializes all
subobjects. Do that here so there are no more warnings.

[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
[3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/

Fixes: 52c34e6e12 ("net: dsa: sja1105: Add support for ethtool port counters")
Link: https://github.com/ClangBuiltLinux/linux/issues/471
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:20:46 -07:00
Stephen Suryaputra ff6ab32bd4 vrf: sit mtu should not be updated when vrf netdev is the link
VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:19:19 -07:00
YueHaibing 68be930249 net: dsa: Fix error cleanup path in dsa_init_module
BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS:  00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
 register_netdevice_notifier+0x43/0x250
 ? 0xffffffffa01e0000
 dsa_slave_register_notifier+0x13/0x70 [dsa_core
 ? 0xffffffffa01e0000
 dsa_init_module+0x2e/0x1000 [dsa_core
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.

Fixes: c9eb3e0f87 ("net: dsa: Add support for learning FDB through notification")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:17:23 -07:00
YueHaibing 638a3a1e34 l2tp: Fix possible NULL pointer dereference
BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
 ? __lock_acquire+0x24e/0x10b0
 lock_acquire+0xdf/0x230
 ? flush_workqueue+0x71/0x530
 flush_workqueue+0x97/0x530
 ? flush_workqueue+0x71/0x530
 l2tp_exit_net+0x170/0x2b0 [l2tp_core
 ? l2tp_exit_net+0x93/0x2b0 [l2tp_core
 ops_exit_list.isra.6+0x36/0x60
 unregister_pernet_operations+0xb8/0x110
 unregister_pernet_device+0x25/0x40
 l2tp_init+0x55/0x1000 [l2tp_core
 ? 0xffffffffa018d000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.

Fixes: 67e04c29ec ("l2tp: unregister l2tp_net_ops on failure path")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:16:47 -07:00
Colin Ian King e4acf42741 taprio: add null check on sched_nest to avoid potential null pointer dereference
The call to nla_nest_start_noflag can return a null pointer and currently
this is not being checked and this can lead to a null pointer dereference
when the null pointer sched_nest is passed to function nla_nest_end. Fix
this by adding in a null pointer check.

Addresses-Coverity: ("Dereference null return value")
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:15:33 -07:00
Linus Torvalds 41bc10cabe stream_open related patches for Linux 5.2
https://lore.kernel.org/linux-fsdevel/CAHk-=wg1tFzcaX2v9Z91vPJiBR486ddW5MtgDL02-fOen2F0Aw@mail.gmail.com/T/#m5b2d9ad3aeacea4bd6aa1964468ac074bf3aa5bf
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEECVWwJCUO7/z+QjZbZsp4hBP2dUkFAlzR1UgQHGtpcnJAbmV4
 ZWRpLmNvbQAKCRBmyniEE/Z1SZBiEACGw1LzUmjV9eBYFjqaUkgX/Zfcu42D4Ek2
 8MuWnNdRabtpGQq0LccYlfoL3yH5xECp14IkCgJvkjqoZ3CcqWcv6uDxf0WtnUqZ
 wPx1RYZykb4RZj2A6/ndhInReP4AlXICyTVulKb+BquVkemMvmXX8k+bkr/msKfT
 9jdKWFIn+ANNABt3y2D7ywZvs9mkxIx+Fti+tVV4BFBeGfUuj4ArZBOHnngRnIk/
 XYlQ7FVzENSPSB+3GvL34jTGEzo8suPHKhHQlIhtcd5hwzVRZKE2sdVXsCc6/WbY
 YnT32gmT1/+cUuDl1mZSiQY5R4Xkb07k6/jNrdmjQpwmWbZu90cuRhb+JBXwnmjZ
 2Wgy3sfwYISDxtePukg1iYePlHlVlGTYqMo3AQrTBs/gEwCKWrsKQb98mRxlf1YK
 e2mdtmq6upYoorLFQesfRgrCg4GTBiPkrR3amXsFgJ2O5fhV6R98ZdGSv4kip19f
 ZNoc/t1EtKGwyAJwjINduv36E3RSHODWwSPtSnmSS1ieCGToY1SI3bVUkFM4C0tO
 5GMdSugHgXRGGVbTd/VftndJm6Wtj8b1j8c/1Vh04Q8qbKKJDRTDzAbK1v8oLaDh
 UXAKMIc8uY4caZy3/bTAB2Ou9dibrSi8Oc+LwZqJlwIcbkwn/IGNvmwtWv4ehorE
 N7EhCFZsFQ==
 =Mavg
 -----END PGP SIGNATURE-----

Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux

Pull stream_open conversion from Kirill Smelkov:

 - remove unnecessary double nonseekable_open from drivers/char/dtlk.c
   as noticed by Pavel Machek while reviewing nonseekable_open ->
   stream_open mass conversion.

 - the mass conversion patch promised in commit 10dce8af34 ("fs:
   stream_open - opener for stream-like files so that read and write can
   run simultaneously without deadlock") and is automatically generated
   by running

        $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci

   I've verified each generated change manually - that it is correct to
   convert - and each other nonseekable_open instance left - that it is
   either not correct to convert there, or that it is not converted due
   to current stream_open.cocci limitations. More details on this in the
   patch.

 - finally, change VFS to pass ppos=NULL into .read/.write for files
   that declare themselves streams. It was suggested by Rasmus Villemoes
   and makes sure that if ppos starts to be erroneously used in a stream
   file, such bug won't go unnoticed and will produce an oops instead of
   creating illusion of position change being taken into account.

   Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to
   use stream_open()" that will be hopefully coming via FUSE tree,
   because fs/fuse/ uses new-style .read_iter/.write_iter, and for these
   accessors position is still passed as non-pointer kiocb.ki_pos .

* tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux:
  vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
  *: convert stream-like files from nonseekable_open -> stream_open
  dtlk: remove double call to nonseekable_open
2019-05-07 12:15:13 -07:00
Colin Ian King d4ee7f195e net: mvpp2: cls: fix less than zero check on a u32 variable
The signed return from the call to mvpp2_cls_c2_port_flow_index is being
assigned to the u32 variable c2.index and then checked for a negative
error condition which is always going to be false. Fix this by assigning
the return to the int variable index and checking this instead.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 90b509b39a ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:14:29 -07:00
Leon Romanovsky b79656ed44 RDMA/ipoib: Allow user space differentiate between valid dev_port
Systemd triggers the following warning during IPoIB device load:

 mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id.
        Should it look at dev_port instead?
        See Documentation/ABI/testing/sysfs-class-net for more info.

This is caused due to user space attempt to differentiate old systems
without dev_port and new systems with dev_port. In case dev_port will be
zero, the systemd will try to read dev_id instead.

There is no need to print a warning in such case, because it is valid
situation and it is needed to ensure systemd compatibility with old
kernels.

Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358
Cc: <stable@vger.kernel.org> # 4.19
Fixes: f6350da41d ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 16:13:23 -03:00
David S. Miller a97f4fe6e1 Merge branch 'fc-quic-pacing'
Eric Dumazet says:

====================
net_sched: sch_fq: enable in-kernel pacing for QUIC servers

Willem added GSO support to UDP stack, greatly improving performance
of QUIC servers.

We also want to enable in-kernel pacing, which is possible thanks to EDT
model, since each sendmsg() can provide a timestamp for the skbs.

We have to change sch_fq to enable feeding packets in arbitrary EDT order,
and make sure that packet classification do not trust unconnected sockets.

Note that this patch series also is a prereq for a future TCP change
enabling per-flow delays/reorders/losses to implement high performance
TCP emulators.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:09:25 -07:00
Eric Dumazet 37c0aead79 net_sched: sch_fq: handle non connected flows
FQ packet scheduler assumed that packets could be classified
based on their owning socket.

This means that if a UDP server uses one UDP socket to send
packets to different destinations, packets all land
in one FQ flow.

This is unfair, since each TCP flow has a unique bucket, meaning
that in case of pressure (fully utilised uplink), TCP flows
have more share of the bandwidth.

If we instead detect unconnected sockets, we can use a stochastic
hash based on the 4-tuple hash.

This also means a QUIC server using one UDP socket will properly
spread the outgoing packets to different buckets, and in-kernel
pacing based on EDT model will no longer risk having big rb-tree on
one flow.

Note that UDP application might provide the skb->hash in an
ancillary message at sendmsg() time to avoid the cost of a dissection
in fq packet scheduler.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:09:25 -07:00
Eric Dumazet eeb84aa0d0 net_sched: sch_fq: do not assume EDT packets are ordered
TCP stack makes sure packets for a given flow are monotically
increasing, but we want to allow UDP packets to use EDT as
well, so that QUIC servers can use in-kernel pacing.

This patch adds a per-flow rb-tree on which packets might
be stored. We still try to use the linear list for the
typical cases where packets are queued with monotically
increasing skb->tstamp, since queue/dequeue packets on
a standard list is O(1).

Note that the ability to store packets in arbitrary EDT
order will allow us to implement later a per TCP socket
mechanism adding delays (with jitter eventually) and reorders,
to implement convenient network emulators.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:09:25 -07:00
Dennis Dalessandro ba7d8117f3 IB/core, ipoib: Do not overreact to SM LID change event
When IPoIB receives an SM LID change event, it reacts by flushing its
path record cache and rejoining multicast groups. This is the same
behavior it performs when it receives a reregistration event. This
behavior is unnecessary as an SM may have database backup or
synchronization mechanisms which permit the SM location or LID to change
without loss of multicast membership and without impact to path records.

Both opensm and the OPA FM issue reregistration events if a new SM is
started (or restarted with a new config) or an SM event occurs which
results in loss of multicast membership records by the SM (such as
opensm failover) or the SM encounters new nodes with Active ports (such
as after joining 2 fabrics by connecting switches via ISLs). Hence this
event can be depended on as the trigger for IPoIB cache and multicast
flushing.

It appears that some drivers, such as qib, and hfi1 issue the
IB_EVENT_SM_CHANGE but other drivers such as mlx4 and mlx5 do not.
Empirical testing on Mellanox EDR using ibv_asyncwatch has confirmed
that Mellanox EDR HCAs do not generate SM change events and that opensm
does generate reregistration.

An SM LID change event is generated by the mentioned drivers to reflect
that sm_lid and/or sm_sl in the local port info has changed. The intent
of this event is to permit applications and ULPs which have a local copy
of this information (or an address handle using it) to update their
information.

The intent is that the reregistration event (caused by the SM via a bit
in Set(PortInfo)) be used to inform nodes that they need to rejoin
multicast groups, resubscribe for notices and potentially update path
records.

When an SM migrates or fails over, a SM LID change event can occur. In
response IPoIB discards path records and multicast membership and loses
connectivity until these records are restored via SA requests. In very
large fabrics, it may take minutes for the SM to be ready and for the SA
responses to be supplied.  This can result in undesirable and
unnecessary IPoIB connectivity impacts. It also can result in an
unnecessary storm of SA queries from all nodes in a cluster potentially
followed by yet another storm if the SM issues the reregistration
request.

The fact the Mellanox HCAs do not even generate this event, is further
evidence that on modern IB fabrics there will be no ill side effects
from the proposed changes below to reduce the reaction by 3 kernel
components to this event. So these changes should be benign for Mellanox
IB fabrics and will benefit OPA fabrics while also making ib_core and
ULP behavor "correct" as intended by the IBTA spec and kernel RDMA event
APIs.

Address these issues by removing IB_EVENT_SM_CHANGE handling from ipoib.
IPoIB does not locally store sm_lid nor sm_sl, so it does not need to do
anything on SM LID change. IPoIB makes use of other ib_core components
to issue SA requests for it and those components correctly track SM LID
and SM LID changes.

Also in ib_core multicast handling,  remove the test for
IB_EVENT_SM_CHANGE. This code is moving all multicast groups to the
error state, which will trigger rejoins. This code is used by IPoIB as
well as the connection manager and other clients of multicast groups.
This kernel module centralizes group membership status and joins since a
node can only join a given group once but multiple ULPs or applications
may want to join the same group. It makes use of the sa_query.c
component in ib_core, which correctly trackes SM LID and SL. This
component does not track SM LID nor SL itself and hence need not react
to their changes.

Similarly in the ib_core cache code remove the handling for the
IB_EVENT_SM_CHANGE.  In this function. The ib_cache_update function
which is ultimately called is updating local copies of the pkey table,
gid table and lmc. It does not update nor retain sm_lid nor sm_sl. As
such it does not need to be called on an SM LID change. It technically
also does not need to be called on a reregistration. The LID_CHANGE,
PKEY_CHANGE, GID_CHANGE and port state change events (PORT_ERR,
PORT_ACTICE) should be sufficient triggers.

It is worth noting that the alternative of simply having the hfi1 and
qib drivers not generate the SM LID change event was explored. While
this would duplicate what Mellanox drivers do now, it is not the correct
behavior and removes the ability for an SM to migrate without requiring
reregistration. Since both opensm and OPA SM have mechanisms to backup
or synchronize registration information, it is desirable to let them
perform SM migrations (with LID or SL changes) without requiring
reregistration when they deem it appropriate.

Suggested-by: Todd Rimmer <todd.rimmer@intel.com>
Tested-by: Michael Brooks <michael.brooks@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Todd Rimmer <todd.rimmer@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 16:06:03 -03:00
Linus Torvalds aa26690fab Changes for Linux 5.2:
- Fix some more buffer deadlocks when performing an unmount after a hard
   shutdown.
 - Fix some minor space accounting issues.
 - Fix some use after free problems.
 - Make the (undocumented) FITRIM behavior consistent with other filesystems.
 - Embiggen the xfs geometry ioctl's data structure.
 - Introduce a new AG geometry ioctl.
 - Introduce a new online health reporting infrastructure and ioctl for
   userspace to query a filesystem's health status.
 - Enhance online scrub and repair to update the health reports.
 - Reduce thundering herd problems when writeback io completes.
 - Fix some transaction reservation type errors.
 - Fix integer overflow problems with delayed alloc reservation counters.
 - Fix some problems where we would exit to userspace without unlocking.
 - Fix inconsistent behavior when finishing deferred ops fails.
 - Strengthen scrub to check incore data against ondisk metadata.
 - Remove long-broken mntpt mount option.
 - Add an online scrub function for the filesystem summary counters,
   which should make online metadata scrub more or less feature complete
   for now.
 - Various cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlzMUEwACgkQ+H93GTRK
 tOvvHw//bou5YL/gMrsxCbg2b7rpsNG3TIOz5Kq52V3JMtyqFWzArpCBEskVZXD0
 J4ZXZMv/VSvI2DgV22w8/vlsjPJiODPu5mIqmcyQmZK8eDg4sL7EKVa601F57kyj
 QPrdT1AnxUl+n1gM4XrV57xmsNwLYMVHKQC9e5MS6LSu7+1sarw7HFxSY1AMG9Ys
 skEvwe762LCbMsnBBLCs/ZeqHWlqDok9HiKZNCj35aRrLV9dA97mjznlBFUJbhbw
 kAG2jeAaG0LQnlnCzPRd3HJqQXlGL4044gx73RRY3+/POVYupKiC9KSlImq/cbLd
 n7UWHVDieWoOuLKverUICw4UuqtkAXurUCW7w91ipEmZUlYKNrMNNXiEm7pfgJU3
 A2KK1R14UYKJ3zX6xPz4mdlYhh0KB/xlN01Rdzhrhk9XKfL92/YyjpyjcTIeUZm8
 RNKLAoWRpJZPou3RPpfZLFTSmtYIcTB92kYV6XpQ3DRrJLjlaHbu9VJaipbZGhxY
 rdF+Rtk8EjKMFP0bixDHePWCu7317vMy1lbpO5UipxyC9eTwry54EaCxP03CI7YO
 OAsqCdf8HYlGqEjWKprkCczMYkDRDT0p4bS27Rdzc1D5lUj6/g5hF7RD0MYc1/eA
 ZDQUqVgBTmAQp+tKPTHhuSTWyZ8IIt0kdg5Z8IRVWxd+SmwwGoo=
 =d2sO
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.2-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "Here's a big pile of new stuff for XFS for 5.2. XFS has grown the
  ability to report metadata health status to userspace after online
  fsck checks the filesystem. The online metadata checking code is (I
  really hope) feature complete with the addition of checks for the
  global fs counters, though it'll remain EXPERIMENTAL for now.

  There are also fixes for thundering herds of writeback completions and
  some other deadlocks, fixes for theoretical integer overflow attacks
  on space accounting, and removal of the long-defunct 'mntpt' option
  which was deprecated in the mid-2000s and (it turns out) totally
  broken since 2011 (and nobody complained...).

  Summary:

   - Fix some more buffer deadlocks when performing an unmount after a
     hard shutdown.

   - Fix some minor space accounting issues.

   - Fix some use after free problems.

   - Make the (undocumented) FITRIM behavior consistent with other
     filesystems.

   - Embiggen the xfs geometry ioctl's data structure.

   - Introduce a new AG geometry ioctl.

   - Introduce a new online health reporting infrastructure and ioctl
     for userspace to query a filesystem's health status.

   - Enhance online scrub and repair to update the health reports.

   - Reduce thundering herd problems when writeback io completes.

   - Fix some transaction reservation type errors.

   - Fix integer overflow problems with delayed alloc reservation
     counters.

   - Fix some problems where we would exit to userspace without
     unlocking.

   - Fix inconsistent behavior when finishing deferred ops fails.

   - Strengthen scrub to check incore data against ondisk metadata.

   - Remove long-broken mntpt mount option.

   - Add an online scrub function for the filesystem summary counters,
     which should make online metadata scrub more or less feature
     complete for now.

   - Various cleanups"

* tag 'xfs-5.2-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (38 commits)
  xfs: change some error-less functions to void types
  xfs: add online scrub for superblock counters
  xfs: don't parse the mtpt mount option
  xfs: always rejoin held resources during defer roll
  xfs: add missing error check in xfs_prepare_shift()
  xfs: scrub should check incore counters against ondisk headers
  xfs: allow scrubbers to pause background reclaim
  xfs: rename the speculative block allocation reclaim toggle functions
  xfs: track delayed allocation reservations across the filesystem
  xfs: fix broken bhold behavior in xrep_roll_ag_trans
  xfs: unlock inode when xfs_ioctl_setattr_get_trans can't get transaction
  xfs: kill the xfs_dqtrx_t typedef
  xfs: widen inode delalloc block counter to 64-bits
  xfs: widen quota block counters to 64-bit integers
  xfs: abort unaligned nowait directio early
  xfs: assert that we don't enter agfl freeing with a non-permanent transaction
  xfs: make tr_growdata a permanent transaction
  xfs: merge adjacent io completions of the same type
  xfs: remove unused m_data_workqueue
  xfs: implement per-inode writeback completion queues
  ...
2019-05-07 11:46:56 -07:00
Linus Torvalds d8456eaf31 Changes for Linux 5.2:
- Add some extra hooks to the iomap buffered write path to enable gfs2
   journalled writes.
 - SPDX conversion
 - Various refactoring.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlzMUJsACgkQ+H93GTRK
 tOsyHxAAjnAAO2ABOt2x9fdsZbuc/3Ox1C0388J21uUOm6lgtKCFm/snVmvC7BMa
 t9bFOS8Y7RLgHclCkEHy0irsHVVuQl+6XyYrjFaPzkoRnVgViZM5aZGSNkBRiBEM
 xVAog5IFLTx59NT41B4pn9y361BFwfHiFRsDgtSVNlv8UsbKdpAMBMX9ezjNLgWI
 H5qJZXfzk5LyNG/jsOe+srwVXsboILvPAiDNP95g2KzrXZMvnf8MsMvAe9cSO9SD
 ERHn9nX5b4hiwiL12lCl10QOsROmElzP82GHJBctFDzdfOfSRuRZw69lFSzf/2CT
 xVypJBm7xVBJ7K50x8KlF1aSLqnxHi/wszS6BaowoMtkPbJRx+FC7M8FCnNr5WtF
 DxJduFBUchbNKt1o2x98Evoqjx6eVp92XsCdjsJ05LQo7cxlwECfYhjruwyg/h16
 qdE+6KmUwOOiqMQ6Z8kvrejpuIq2rcHlJydDojN+lIbbzmtge8ob/q/A1J8FT6k9
 pzVW3y1h7yvgi0ClaQu2DCfx2is2Bd4y0w1b/Y/0jkV9aVbtPqt0akqcaLtAUgc9
 25CkJL0sc7QB88Kd3sP9k4aGlQ2TAx52+3TWDo+CBbfPHBTMDWnGB1nE742WLO4v
 neH+wSzLP/6U9JkxyRpiYHD+6zLAzq2xTZeiRSXYuzrRqVxaurY=
 =Qumg
 -----END PGP SIGNATURE-----

Merge tag 'iomap-5.2-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap updates from Darrick Wong:
 "Nothing particularly exciting here, just adding some callouts for gfs2
  and cleaning a few things.

  Summary:

   - Add some extra hooks to the iomap buffered write path to enable
     gfs2 journalled writes

   - SPDX conversion

   - Various refactoring"

* tag 'iomap-5.2-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: move iomap_read_inline_data around
  iomap: Add a page_prepare callback
  iomap: Fix use-after-free error in page_done callback
  fs: Turn __generic_write_end into a void function
  iomap: Clean up __generic_write_end calling
  iomap: convert to SPDX identifier
2019-05-07 11:43:32 -07:00
Linus Torvalds b8cac3cd24 Several minor jfs fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAlzQUCsACgkQNqiEXrVA
 jGTXtA/9GJHwg22NvyVxGWF4GLLamFPqgiyaj/XhNw2+2BkK4I60uIPI9QucKG8C
 RWMhMI3ZZH6dxiGitPQ4hLncEVcTTcHNEwhGcgT85M4tOs+g7mVf03+X0xrveXVB
 GMFdf2ETWE80KkIUHaITAHBm/WU7FZG81RQg8IYr8aIqxg3Ey5sowU0vVg54sn61
 jNV2h/UFa4VnPX4o+5GbKZ8gZylBoYDLV9WPlD38BRa10eZDjVcDeASBefvTqQO0
 n/jBzqkWGMPqj2juKXL1MX2Zr+LnUL9An63Ak7EX95slVjiMmncffVJfyY/Sewoa
 hTGIck19NABJsyO83BJqrF0C/c6QbgeRkZS8yZjIVZYF7RbyjQD18TqCZFJMoVpV
 xyZ2dUg5DE2nFSLzIXE1JprPuOgNkY87vwO/PAO1jka7LPk2qQZUKGL3+Xw4At6v
 XNohTbQKhfqYgeMjr2H9aAw53SnAXiHwCaje+mK26WZsT3KqgN4BbtWKEBcYrSYz
 J1ivB7mpNhYwbizUWFZT5znA/ItqwN8YbCazGlxYFOhXgFWUbUXFds250w8F6Iy7
 jp3RkEB8HXuFoFtyVjLTYnoM87l37fTQSTrkl5k5CsQ3kges7v6nxGSaZUHE1Iho
 MQZr151zKQrcmKwjKGxVFMKFTU94x8TYALqYO6iDbmu8rra7nWw=
 =M5Gm
 -----END PGP SIGNATURE-----

Merge tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy

Pull jfs updates from Dave Kleikamp:
 "Several minor jfs fixes"

* tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy:
  jfs: fix bogus variable self-initialization
  fs/jfs: Switch to use new generic UUID API
  jfs: compare old and new mode before setting update_mode flag
  jfs: remove incorrect comment in jfs_superblock
  jfs: fix spelling mistake, EACCESS -> EACCES
2019-05-07 11:37:27 -07:00
Linus Torvalds 9f2e3a53f7 for-5.2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlzQM7MACgkQxWXV+ddt
 WDvrVw/+K0AElSuEfDFWd9HBqRAPlGaEP71xCGGle1tkzuY0DJVIBRZ72q8UR0YP
 7yke7DU0oqXekGype83eTJUjDSLoOXrlVoQ+VqBdFteDk0W4BCG6Nw+N+wYBF7An
 gXRXlGFaYzb2CqqjG92FbtkfxBzISR0XBCQBUN9CBqHNDu1EUQSbnTBkmTMN8MYh
 PCoo37S6e5fR36uB/rOKbGNBJjsZEEg/2G6DprP52+eiQWV2h0avEUJrvv6xC4so
 97QNgUNuuiUmyurqcYHdlaflZwIhuf5nQeNeu/UvMZmmRnBHPhSP7YPM7f7FftwA
 y0d0p+AiEAO0he8nGFb5C6Avs4vuv1u65o1NbF5fqnmAyt+KXWem3LeG6etsXgU8
 +eITgprJD3sNBMDLbLoA+wlhTps+w9tukVF5Zp2a8KgQLMMEyAYqUDWmSHvnO2Me
 RCNPZLzeGXETgKun0WuMtl/CX2iBDnc0Kq5O6ks2ORl2TH6bg5lgEIwr6HP/Ewoy
 w8twsmCOltrxiIptqyQHYD+kvNwqMVV9LSOQ8+EjbYd6BHsfjHjKObOBkhmJ7iqz
 4MAIcZU++F9DLRv92H1kUYVNhAMCdXkEIWyxhZPwN1lUi5k9AhknY3FbheNc7ldl
 LNPIgRxamWCq9oBmzfOcJ3eFOBtNN02fgA1GTXGd1/AgAilEep8=
 =fEkD
 -----END PGP SIGNATURE-----

Merge tag 'for-5.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "This time the majority of changes are cleanups, though there's still a
  number of changes of user interest.

  User visible changes:

   - better read time and write checks to catch errors early and before
     writing data to disk (to catch potential memory corruption on data
     that get checksummed)

   - qgroups + metadata relocation: last speed up patch int the series
     to address the slowness, there should be no overhead comparing
     balance with and without qgroups

   - FIEMAP ioctl does not start a transaction unnecessarily, this can
     result in a speed up and less blocking due to IO

   - LOGICAL_INO (v1, v2) does not start transaction unnecessarily, this
     can speed up the mentioned ioctl and scrub as well

   - fsync on files with many (but not too many) hardlinks is faster,
     finer decision if the links should be fsynced individually or
     completely

   - send tries harder to find ranges to clone

   - trim/discard will skip unallocated chunks that haven't been touched
     since the last mount

  Fixes:

   - send flushes delayed allocation before start, otherwise it could
     miss some changes in case of a very recent rw->ro switch of a
     subvolume

   - fix fallocate with qgroups that could lead to space accounting
     underflow, reported as a warning

   - trim/discard ioctl honours the requested range

   - starting send and dedupe on a subvolume at the same time will let
     only one of them succeed, this is to prevent changes that send
     could miss due to dedupe; both operations are restartable

  Core changes:

   - more tree-checker validations, errors reported by fuzzing tools:
      - device item
      - inode item
      - block group profiles

   - tracepoints for extent buffer locking

   - async cow preallocates memory to avoid errors happening too deep in
     the call chain

   - metadata reservations for delalloc reworked to better adapt in
     many-writers/low-space scenarios

   - improved space flushing logic for intense DIO vs buffered workloads

   - lots of cleanups
      - removed unused struct members
      - redundant argument removal
      - properties and xattrs
      - extent buffer locking
      - selftests
      - use common file type conversions
      - many-argument functions reduction"

* tag 'for-5.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (227 commits)
  btrfs: Use kvmalloc for allocating compressed path context
  btrfs: Factor out common extent locking code in submit_compressed_extents
  btrfs: Set io_tree only once in submit_compressed_extents
  btrfs: Replace clear_extent_bit with unlock_extent
  btrfs: Make compress_file_range take only struct async_chunk
  btrfs: Remove fs_info from struct async_chunk
  btrfs: Rename async_cow to async_chunk
  btrfs: Preallocate chunks in cow_file_range_async
  btrfs: reserve delalloc metadata differently
  btrfs: track DIO bytes in flight
  btrfs: merge calls of btrfs_setxattr and btrfs_setxattr_trans in btrfs_set_prop
  btrfs: delete unused function btrfs_set_prop_trans
  btrfs: start transaction in xattr_handler_set_prop
  btrfs: drop local copy of inode i_mode
  btrfs: drop old_fsflags in btrfs_ioctl_setflags
  btrfs: modify local copy of btrfs_inode flags
  btrfs: drop useless inode i_flags copy and restore
  btrfs: start transaction in btrfs_ioctl_setflags()
  btrfs: export btrfs_set_prop
  btrfs: refactor btrfs_set_props to validate externally
  ...
2019-05-07 11:34:19 -07:00
Linus Torvalds 78438ce18f Merge branch 'stable-fodder' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs stable fodder fixes from Al Viro:

 - acct_on() fix for deadlock caught by overlayfs folks

 - autofs RCU use-after-free SNAFU (->d_manage() can be called
   locklessly, so we need to RCU-delay freeing the objects it looks at)

 - (hopefully) the end of "do we need freeing this dentry RCU-delayed"
   whack-a-mole.

* 'stable-fodder' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs: fix use-after-free in lockless ->d_manage()
  dcache: sort the freeing-without-RCU-delay mess for good.
  acct_on(): don't mess with freeze protection
2019-05-07 11:17:26 -07:00
Linus Torvalds 168e153d5e Merge branch 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode freeing updates from Al Viro:
 "Introduction of separate method for RCU-delayed part of
  ->destroy_inode() (if any).

  Pretty much as posted, except that destroy_inode() stashes
  ->free_inode into the victim (anon-unioned with ->i_fops) before
  scheduling i_callback() and the last two patches (sockfs conversion
  and folding struct socket_wq into struct socket) are excluded - that
  pair should go through netdev once davem reopens his tree"

* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
  orangefs: make use of ->free_inode()
  shmem: make use of ->free_inode()
  hugetlb: make use of ->free_inode()
  overlayfs: make use of ->free_inode()
  jfs: switch to ->free_inode()
  fuse: switch to ->free_inode()
  ext4: make use of ->free_inode()
  ecryptfs: make use of ->free_inode()
  ceph: use ->free_inode()
  btrfs: use ->free_inode()
  afs: switch to use of ->free_inode()
  dax: make use of ->free_inode()
  ntfs: switch to ->free_inode()
  securityfs: switch to ->free_inode()
  apparmor: switch to ->free_inode()
  rpcpipe: switch to ->free_inode()
  bpf: switch to ->free_inode()
  mqueue: switch to ->free_inode()
  ufs: switch to ->free_inode()
  coda: switch to ->free_inode()
  ...
2019-05-07 10:57:05 -07:00
David S. Miller a55a385d8c Merge branch 'hns3-next'
Huazhong Tan says:

====================
cleanup & optimizations & bugfixes for HNS3 driver

This patchset contains some cleanup related to hns3_enet_ring
struct and tx bd filling process, optimizations related
to rx page reusing, barrier using and tso handling process,
bugfixes related to tunnel type handling and error handling for
desc filling.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 10:37:14 -07:00