Commit Graph

181 Commits

Author SHA1 Message Date
Wu Fengguang bb0822954a squeeze max-pause area and drop pass-good area
Revert the pass-good area introduced in ffd1f609ab ("writeback:
introduce max-pause and pass-good dirty limits") and make the max-pause
area smaller and safe.

This fixes ~30% performance regression in the ext3 data=writeback
fio_mmap_randwrite_64k/fio_mmap_randrw_64k test cases, where there are
12 JBOD disks, on each disk runs 8 concurrent tasks doing reads+writes.

Using deadline scheduler also has a regression, but not that big as CFQ,
so this suggests we have some write starvation.

The test logs show that

- the disks are sometimes under utilized

- global dirty pages sometimes rush high to the pass-good area for
  several hundred seconds, while in the mean time some bdi dirty pages
  drop to very low value (bdi_dirty << bdi_thresh).  Then suddenly the
  global dirty pages dropped under global dirty threshold and bdi_dirty
  rush very high (for example, 2 times higher than bdi_thresh). During
  which time balance_dirty_pages() is not called at all.

So the problems are

1) The random writes progress so slow that they break the assumption of
   the max-pause logic that "8 pages per 200ms is typically more than
   enough to curb heavy dirtiers".

2) The max-pause logic ignored task_bdi_thresh and thus opens the possibility
   for some bdi's to over dirty pages, leading to (bdi_dirty >> bdi_thresh)
   and then (bdi_thresh >> bdi_dirty) for others.

3) The higher max-pause/pass-good thresholds somehow leads to the bad
   swing of dirty pages.

The fix is to allow the task to slightly dirty over task_bdi_thresh, but
no way to exceed bdi_dirty and/or global dirty_thresh.

Tests show that it fixed the JBOD regression completely (both behavior
and performance), while still being able to cut down large pause times
in balance_dirty_pages() for single-disk cases.

Reported-by: Li Shaohua <shaohua.li@intel.com>
Tested-by: Li Shaohua <shaohua.li@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-08-19 22:42:07 +08:00
Linus Torvalds f01ef569cd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: (27 commits)
  mm: properly reflect task dirty limits in dirty_exceeded logic
  writeback: don't busy retry writeback on new/freeing inodes
  writeback: scale IO chunk size up to half device bandwidth
  writeback: trace global_dirty_state
  writeback: introduce max-pause and pass-good dirty limits
  writeback: introduce smoothed global dirty limit
  writeback: consolidate variable names in balance_dirty_pages()
  writeback: show bdi write bandwidth in debugfs
  writeback: bdi write bandwidth estimation
  writeback: account per-bdi accumulated written pages
  writeback: make writeback_control.nr_to_write straight
  writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr()
  writeback: trace event writeback_queue_io
  writeback: trace event writeback_single_inode
  writeback: remove .nonblocking and .encountered_congestion
  writeback: remove writeback_control.more_io
  writeback: skip balance_dirty_pages() for in-memory fs
  writeback: add bdi_dirty_limit() kernel-doc
  writeback: avoid extra sync work at enqueue time
  writeback: elevate queue_io() into wb_writeback()
  ...

Fix up trivial conflicts in fs/fs-writeback.c and mm/filemap.c
2011-07-26 10:39:54 -07:00
Wu Fengguang 99b12e3d88 writeback: account NR_WRITTEN at IO completion time
NR_WRITTEN is now accounted at block IO enqueue time, which is not very
accurate as to common understanding.  This moves NR_WRITTEN accounting to
the IO completion time and makes it more consistent with BDI_WRITTEN,
which is used for bandwidth estimation.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:11 -07:00
Konstantin Khlebnikov 72c4783210 mm: remove useless rcu lock-unlock from mapping_tagged()
radix_tree_tagged() is lockless - it reads from a member of the raid-tree
root node.  It does not require any protection.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:11 -07:00
Jan Kara bcff25fc8a mm: properly reflect task dirty limits in dirty_exceeded logic
We set bdi->dirty_exceeded (and thus ratelimiting code starts to
call balance_dirty_pages() every 8 pages) when a per-bdi limit is
exceeded or global limit is exceeded. But per-bdi limit also depends
on the task. Thus different tasks reach the limit on that bdi at
different levels of dirty pages. The result is that with current code
bdi->dirty_exceeded ping-ponged between 1 and 0 depending on which task
just got into balance_dirty_pages().

We fix the issue by clearing bdi->dirty_exceeded only when per-bdi amount
of dirty pages drops below the threshold (7/8 * bdi_dirty_limit) where task
limits already do not have any influence.

Impact:  The end result is, the dirty pages are kept more tightly under
control, with the average number slightly lowered than before.  This
reduces the risk to throttle light dirtiers and hence more responsive.
However it may add overheads by enforcing balance_dirty_pages() calls
on every 8 pages when there are 2+ heavy dirtiers.

CC: Andrew Morton <akpm@linux-foundation.org>
CC: Christoph Hellwig <hch@infradead.org>
CC: Dave Chinner <david@fromorbit.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-24 10:51:52 +08:00
Wu Fengguang e1cbe23601 writeback: trace global_dirty_state
Add trace event balance_dirty_state for showing the global dirty page
counts and thresholds at each global_dirty_limits() invocation.  This
will cover the callers throttle_vm_writeout(), over_bground_thresh()
and each balance_dirty_pages() loop.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:03 -07:00
Wu Fengguang ffd1f609ab writeback: introduce max-pause and pass-good dirty limits
The max-pause limit helps to keep the sleep time inside
balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means
per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which
normally is enough to stop dirtiers from continue pushing the dirty
pages high, unless there are a sufficient large number of slow dirtiers
(eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the
write bandwidth of a slow disk and hence accumulating more and more dirty
pages).

The pass-good limit helps to let go of the good bdi's in the presence of
a blocked bdi (ie. NFS server not responding) or slow USB disk which for
some reason build up a large number of initial dirty pages that refuse
to go away anytime soon.

For example, given two bdi's A and B and the initial state

	bdi_thresh_A = dirty_thresh / 2
	bdi_thresh_B = dirty_thresh / 2
	bdi_dirty_A  = dirty_thresh / 2
	bdi_dirty_B  = dirty_thresh / 2

Then A get blocked, after a dozen seconds

	bdi_thresh_A = 0
	bdi_thresh_B = dirty_thresh
	bdi_dirty_A  = dirty_thresh / 2
	bdi_dirty_B  = dirty_thresh / 2

The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages
will be effectively throttled by condition (nr_dirty < dirty_thresh).
This has two problems:
(1) we lose the protections for light dirtiers
(2) balance_dirty_pages() effectively becomes IO-less because the
    (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good
    for IO, but balance_dirty_pages() loses an important way to break
    out of the loop which leads to more spread out throttle delays.

DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is,
DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above
example while this patch uses the more conservative value 8 so as not to
surprise people with too many dirty pages than expected.

The max-pause limit won't noticeably impact the speed dirty pages are
knocked down when there is a sudden drop of global/bdi dirty thresholds.
Because the heavy dirties will be throttled below 160KB/s which is slow
enough. It does help to avoid long dirty throttle delays and especially
will make light dirtiers more responsive.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:02 -07:00
Wu Fengguang c42843f2f0 writeback: introduce smoothed global dirty limit
The start of a heavy weight application (ie. KVM) may instantly knock
down determine_dirtyable_memory() if the swap is not enabled or full.
global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi
dirty thresholds that are _much_ lower than the global/bdi dirty pages.

balance_dirty_pages() will then heavily throttle all dirtiers including
the light ones, until the dirty pages drop below the new dirty thresholds.
During this _deep_ dirty-exceeded state, the system may appear rather
unresponsive to the users.

About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty
threshold to heavy dirtiers than light ones, and the dirty pages will
be throttled around the heavy dirtiers' dirty threshold and reasonably
below the light dirtiers' dirty threshold. In this state, only the heavy
dirtiers will be throttled and the dirty pages are carefully controlled
to not exceed the light dirtiers' dirty threshold. However if the
threshold itself suddenly drops below the number of dirty pages, the
light dirtiers will get heavily throttled.

So introduce global_dirty_limit for tracking the global dirty threshold
with policies

- follow downwards slowly
- follow up in one shot

global_dirty_limit can effectively mask out the impact of sudden drop of
dirtyable memory. It will be used in the next patch for two new type of
dirty limits. Note that the new dirty limits are not going to avoid
throttling the light dirtiers, but could limit their sleep time to 200ms.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:02 -07:00
Wu Fengguang 7762741e3a writeback: consolidate variable names in balance_dirty_pages()
Introduce

	nr_dirty = NR_FILE_DIRTY + NR_WRITEBACK + NR_UNSTABLE_NFS

in order to simplify many tests in the following patches.

balance_dirty_pages() will eventually care only about the dirty sums
besides nr_writeback.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:02 -07:00
Wu Fengguang e98be2d599 writeback: bdi write bandwidth estimation
The estimation value will start from 100MB/s and adapt to the real
bandwidth in seconds.

It tries to update the bandwidth only when disk is fully utilized.
Any inactive period of more than one second will be skipped.

The estimated bandwidth will be reflecting how fast the device can
writeout when _fully utilized_, and won't drop to 0 when it goes idle.
The value will remain constant at disk idle time. At busy write time, if
not considering fluctuations, it will also remain high unless be knocked
down by possible concurrent reads that compete for the disk time and
bandwidth with async writes.

The estimation is not done purely in the flusher because there is no
guarantee for write_cache_pages() to return timely to update bandwidth.

The bdi->avg_write_bandwidth smoothing is very effective for filtering
out sudden spikes, however may be a little biased in long term.

The overheads are low because the bdi bandwidth update only occurs at
200ms intervals.

The 200ms update interval is suitable, because it's not possible to get
the real bandwidth for the instance at all, due to large fluctuations.

The NFS commits can be as large as seconds worth of data. One XFS
completion may be as large as half second worth of data if we are going
to increase the write chunk to half second worth of data. In ext4,
fluctuations with time period of around 5 seconds is observed. And there
is another pattern of irregular periods of up to 20 seconds on SSD tests.

That's why we are not only doing the estimation at 200ms intervals, but
also averaging them over a period of 3 seconds and then go further to do
another level of smoothing in avg_write_bandwidth.

CC: Li Shaohua <shaohua.li@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:01 -07:00
Jan Kara f7d2b1ecd0 writeback: account per-bdi accumulated written pages
Introduce the BDI_WRITTEN counter. It will be used for estimating the
bdi's write bandwidth.

Peter Zijlstra <a.p.zijlstra@chello.nl>:
Move BDI_WRITTEN accounting into __bdi_writeout_inc().
This will cover and fix fuse, which only calls bdi_writeout_inc().

CC: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:01 -07:00
Wu Fengguang d46db3d582 writeback: make writeback_control.nr_to_write straight
Pass struct wb_writeback_work all the way down to writeback_sb_inodes(),
and initialize the struct writeback_control there.

struct writeback_control is basically designed to control writeback of a
single file, but we keep abuse it for writing multiple files in
writeback_sb_inodes() and its callers.

It immediately clean things up, e.g. suddenly wbc.nr_to_write vs
work->nr_pages starts to make sense, and instead of saving and restoring
pages_skipped in writeback_sb_inodes it can always start with a clean
zero value.

It also makes a neat IO pattern change: large dirty files are now
written in the full 4MB writeback chunk size, rather than whatever
remained quota in wbc->nr_to_write.

Acked-by: Jan Kara <jack@suse.cz>
Proposed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-07-09 22:09:01 -07:00
Wu Fengguang 36715cef07 writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr()
This helps prevent tmpfs dirtiers from skewing the per-cpu bdp_ratelimits.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-20 00:25:46 +08:00
Wu Fengguang 3efaf0faba writeback: skip balance_dirty_pages() for in-memory fs
This avoids unnecessary checks and dirty throttling on tmpfs/ramfs.

Notes about the tmpfs/ramfs behavior changes:

As for 2.6.36 and older kernels, the tmpfs writes will sleep inside
balance_dirty_pages() as long as we are over the (dirty+background)/2
global throttle threshold.  This is because both the dirty pages and
threshold will be 0 for tmpfs/ramfs. Hence this test will always
evaluate to TRUE:

                dirty_exceeded =
                        (bdi_nr_reclaimable + bdi_nr_writeback >= bdi_thresh)
                        || (nr_reclaimable + nr_writeback >= dirty_thresh);

For 2.6.37, someone complained that the current logic does not allow the
users to set vm.dirty_ratio=0.  So commit 4cbec4c8b9 changed the test to

                dirty_exceeded =
                        (bdi_nr_reclaimable + bdi_nr_writeback > bdi_thresh)
                        || (nr_reclaimable + nr_writeback > dirty_thresh);

So 2.6.37 will behave differently for tmpfs/ramfs: it will never get
throttled unless the global dirty threshold is exceeded (which is very
unlikely to happen; once happen, will block many tasks).

I'd say that the 2.6.36 behavior is very bad for tmpfs/ramfs. It means
for a busy writing server, tmpfs write()s may get livelocked! The
"inadvertent" throttling can hardly bring help to any workload because
of its "either no throttling, or get throttled to death" property.

So based on 2.6.37, this patch won't bring more noticeable changes.

CC: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-08 08:25:22 +08:00
Wu Fengguang 6f71865627 writeback: add bdi_dirty_limit() kernel-doc
Clarify the bdi_dirty_limit() comment.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-08 08:25:22 +08:00
Wu Fengguang 6e6938b6d3 writeback: introduce .tagged_writepages for the WB_SYNC_NONE sync stage
sync(2) is performed in two stages: the WB_SYNC_NONE sync and the
WB_SYNC_ALL sync. Identify the first stage with .tagged_writepages and
do livelock prevention for it, too.

Jan's commit f446daaea9 ("mm: implement writeback livelock avoidance
using page tagging") is a partial fix in that it only fixed the
WB_SYNC_ALL phase livelock.

Although ext4 is tested to no longer livelock with commit f446daaea9,
it may due to some "redirty_tail() after pages_skipped" effect which
is by no means a guarantee for _all_ the file systems.

Note that writeback_inodes_sb() is called by not only sync(), they are
treated the same because the other callers also need livelock prevention.

Impact:  It changes the order in which pages/inodes are synced to disk.
Now in the WB_SYNC_NONE stage, it won't proceed to write the next inode
until finished with the current inode.

Acked-by: Jan Kara <jack@suse.cz>
CC: Dave Chinner <david@fromorbit.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-08 08:25:20 +08:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Jun'ichi Nomura cf15b07cf4 writeback: make mapping->writeback_index to point to the last written page
For range-cyclic writeback (e.g.  kupdate), the writeback code sets a
continuation point of the next writeback to mapping->writeback_index which
is set the page after the last written page.  This happens so that we
evenly write the whole file even if pages in it get continuously
redirtied.

However, in some cases, sequential writer is writing in the middle of the
page and it just redirties the last written page by continuing from that.
For example with an application which uses a file as a big ring buffer we
see:

[1st writeback session]
       ...
       flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898514 + 8
       flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898522 + 8
       flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898530 + 8
       flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898538 + 8
       flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898546 + 8
     kworker/0:1-11    4571: block_rq_issue: 8,0 W 0 () 94898514 + 40
>>     flush-8:0-2743  4571: block_bio_queue: 8,0 W 94898554 + 8
>>     flush-8:0-2743  4571: block_rq_issue: 8,0 W 0 () 94898554 + 8

[2nd writeback session after 35sec]
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94898562 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94898570 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94898578 + 8
       ...
     kworker/0:1-11    4606: block_rq_issue: 8,0 W 0 () 94898562 + 640
     kworker/0:1-11    4606: block_rq_issue: 8,0 W 0 () 94899202 + 72
       ...
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94899962 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94899970 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94899978 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94899986 + 8
       flush-8:0-2743  4606: block_bio_queue: 8,0 W 94899994 + 8
     kworker/0:1-11    4606: block_rq_issue: 8,0 W 0 () 94899962 + 40
>>     flush-8:0-2743  4606: block_bio_queue: 8,0 W 94898554 + 8
>>     flush-8:0-2743  4606: block_rq_issue: 8,0 W 0 () 94898554 + 8

So we seeked back to 94898554 after we wrote all the pages at the end of
the file.

This extra seek seems unnecessary.  If we continue writeback from the last
written page, we can avoid it and do not cause harm to other cases.  The
original intent of even writeout over the whole file is preserved and if
the page does not get redirtied pagevec_lookup_tag() just skips it.

As an exceptional case, when I/O error happens, set done_index to the next
page as the comment in the code suggests.

Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:09 -07:00
Minchan Kim 278df9f451 mm: reclaim invalidated page ASAP
invalidate_mapping_pages is very big hint to reclaimer.  It means user
doesn't want to use the page any more.  So in order to prevent working set
page eviction, this patch move the page into tail of inactive list by
PG_reclaim.

Please, remember that pages in inactive list are working set as well as
active list.  If we don't move pages into inactive list's tail, pages near
by tail of inactive list can be evicted although we have a big clue about
useless pages.  It's totally bad.

Now PG_readahead/PG_reclaim is shared.  fe3cba17 added ClearPageReclaim
into clear_page_dirty_for_io for preventing fast reclaiming readahead
marker page.

In this series, PG_reclaim is used by invalidated page, too.  If VM find
the page is invalidated and it's dirty, it sets PG_reclaim to reclaim
asap.  Then, when the dirty page will be writeback,
clear_page_dirty_for_io will clear PG_reclaim unconditionally.  It
disturbs this serie's goal.

I think it's okay to clear PG_readahead when the page is dirty, not
writeback time.  So this patch moves ClearPageReadahead.  In v4,
ClearPageReadahead in set_page_dirty has a problem which is reported by
Steven Barrett.  It's due to compound page.  Some driver(ex, audio) calls
set_page_dirty with compound page which isn't on LRU.  but my patch does
ClearPageRelcaim on compound page.  In non-CONFIG_PAGEFLAGS_EXTENDED, it
breaks PageTail flag.

I think it doesn't affect THP and pass my test with THP enabling but Cced
Andrea for double check.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Steven Barrett <damentz@liquorix.net>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:04 -07:00
Shaohua Li 9b6096a65f mm: make generic_writepages() use plugging
This recovers a performance regression caused by the removal
of the per-device plugging.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 10:47:06 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Minchan Kim 240c879f20 writeback: avoid unnecessary determine_dirtyable_memory call
I think determine_dirtyable_memory() is a rather costly function since it
need many atomic reads for gathering zone/global page state.  But when we
use vm_dirty_bytes && dirty_background_bytes, we don't need that costly
calculation.

This patch eliminates such unnecessary overhead.

NOTE : newly added if condition might add overhead in normal path.
       But it should be _really_ small because anyway we need the
       access both vm_dirty_bytes and dirty_background_bytes so it is
       likely to hit the cache.

[akpm@linux-foundation.org: fix used-uninitialised warning]
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:38 -08:00
Bob Liu c3f0da6315 mm/page-writeback.c: fix __set_page_dirty_no_writeback() return value
__set_page_dirty_no_writeback() should return true if it actually
transitioned the page from a clean to dirty state although it seems nobody
uses its return value at present.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:32 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Minchan Kim ebd1373d40 writeback: fix global_dirty_limits comment runtime -> real-time
Change runtime with real-time

Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-04 11:09:29 +01:00
Wu Fengguang d153ba6445 writeback: do uninterruptible sleep in balance_dirty_pages()
Using TASK_INTERRUPTIBLE in balance_dirty_pages() seems wrong.  If it's
going to do that then it must break out if signal_pending(), otherwise
it's pretty much guaranteed to degenerate into a busywait loop.  Plus we
*do* want these processes to appear in D state and to contribute to load
average.

So it should be TASK_UNINTERRUPTIBLE.                 -- Andrew Morton

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 19:43:33 -08:00
Wu Fengguang 4cbec4c8b9 writeback: remove the internal 5% low bound on dirty_ratio
The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
This is not a user expected behavior.  And it's inconsistent with
calc_period_shift(), which uses the plain vm_dirty_ratio value.

Let's remove the internal bound.

At the same time, fix balance_dirty_pages() to work with the
dirty_thresh=0 case.  This allows applications to proceed when
dirty+writeback pages are all cleaned.

And ">" fits with the name "exceeded" better than ">=" does.  Neil thinks
it is an aesthetic improvement as well as a functional one :)

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Proposed-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Michael Rubin ea941f0e2a writeback: add nr_dirtied and nr_written to /proc/vmstat
To help developers and applications gain visibility into writeback
behaviour adding two entries to vm_stat_items and /proc/vmstat.  This will
allow us to track the "written" and "dirtied" counts.

   # grep nr_dirtied /proc/vmstat
   nr_dirtied 3747
   # grep nr_written /proc/vmstat
   nr_written 3618

Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:06 -07:00
Michael Rubin f629d1c9bd mm: add account_page_writeback()
To help developers and applications gain visibility into writeback
behaviour this patch adds two counters to /proc/vmstat.

  # grep nr_dirtied /proc/vmstat
  nr_dirtied 3747
  # grep nr_written /proc/vmstat
  nr_written 3618

These entries allow user apps to understand writeback behaviour over time
and learn how it is impacting their performance.  Currently there is no
way to inspect dirty and writeback speed over time.  It's not possible for
nr_dirty/nr_writeback.

These entries are necessary to give visibility into writeback behaviour.
We have /proc/diskstats which lets us understand the io in the block
layer.  We have blktrace for more in depth understanding.  We have
e2fsprogs and debugsfs to give insight into the file systems behaviour,
but we don't offer our users the ability understand what writeback is
doing.  There is no way to know how active it is over the whole system, if
it's falling behind or to quantify it's efforts.  With these values
exported users can easily see how much data applications are sending
through writeback and also at what rates writeback is processing this
data.  Comparing the rates of change between the two allow developers to
see when writeback is not able to keep up with incoming traffic and the
rate of dirty memory being sent to the IO back end.  This allows folks to
understand their io workloads and track kernel issues.  Non kernel
engineers at Google often use these counters to solve puzzling performance
problems.

Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written

Patch #5 add writeback thresholds to /proc/vmstat

Currently these values are in debugfs. But they should be promoted to
/proc since they are useful for developers who are writing databases
and file servers and are not debugging the kernel.

The output is as below:

 # grep threshold /proc/vmstat
 nr_pages_dirty_threshold 409111
 nr_pages_dirty_background_threshold 818223

This patch:

This allows code outside of the mm core to safely manipulate page
writeback state and not worry about the other accounting.  Not using these
routines means that some code will lose track of the accounting and we get
bugs.

Modify nilfs2 to use interface.

Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:06 -07:00
Linus Torvalds 997396a73a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix get_ticket_handler() error handling
  ceph: don't BUG on ENOMEM during mds reconnect
  ceph: ceph_mdsc_build_path() returns an ERR_PTR
  ceph: Fix warnings
  ceph: ceph_get_inode() returns an ERR_PTR
  ceph: initialize fields on new dentry_infos
  ceph: maintain i_head_snapc when any caps are dirty, not just for data
  ceph: fix osd request lru adjustment when sending request
  ceph: don't improperly set dir complete when holding EXCL cap
  mm: exporting account_page_dirty
  ceph: direct requests in snapped namespace based on nonsnap parent
  ceph: queue cap snap writeback for realm children on snap update
  ceph: include dirty xattrs state in snapped caps
  ceph: fix xattr cap writeback
  ceph: fix multiple mds session shutdown
2010-08-28 14:07:20 -07:00
Dave Chinner 546a192422 writeback: write_cache_pages doesn't terminate at nr_to_write <= 0
I noticed XFS writeback in 2.6.36-rc1 was much slower than it should have
been. Enabling writeback tracing showed:

    flush-253:16-8516  [007] 1342952.351608: wbc_writepage: bdi 253:16: towrt=1024 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [007] 1342952.351654: wbc_writepage: bdi 253:16: towrt=1023 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369520: wbc_writepage: bdi 253:16: towrt=0 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369542: wbc_writepage: bdi 253:16: towrt=-1 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369549: wbc_writepage: bdi 253:16: towrt=-2 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0

Writeback is not terminating in background writeback if ->writepage is
returning with wbc->nr_to_write == 0, resulting in sub-optimal single page
writeback on XFS.

Fix the write_cache_pages loop to terminate correctly when this situation
occurs and so prevent this sub-optimal background writeback pattern. This
improves sustained sequential buffered write performance from around
250MB/s to 750MB/s for a 100GB file on an XFS filesystem on my 8p test VM.

Cc:<stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:44:34 +10:00
Michael Rubin 679ceace84 mm: exporting account_page_dirty
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.

Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:51 -07:00
Jan Kara d5ed3a4af7 lib/radix-tree.c: fix overflow in radix_tree_range_tag_if_tagged()
When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory.  Check for overflow and exit in that case.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20 09:34:55 -07:00
Randy Dunlap 03ab450f03 mm/page-writeback: fix non-kernel-doc function comments
Remove leading /** from non-kernel-doc function comments to prevent
kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14 16:20:59 -07:00
Wu Fengguang 1babe18385 writeback: add comment to the dirty limit functions
Document global_dirty_limits() and bdi_dirty_limit().

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Wu Fengguang 16c4042f08 writeback: avoid unnecessary calculation of bdi dirty thresholds
Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so
that the latter can be avoided when under global dirty background
threshold (which is the normal state for most systems).

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Wu Fengguang e50e37201a writeback: balance_dirty_pages(): reduce calls to global_page_state
Reducing the number of times balance_dirty_pages calls global_page_state
reduces the cache references and so improves write performance on a
variety of workloads.

'perf stats' of simple fio write tests shows the reduction in cache
access.  Where the test is fio 'write,mmap,600Mb,pre_read' on AMD AthlonX2
with 3Gb memory (dirty_threshold approx 600 Mb) running each test 10
times, dropping the fasted & slowest values then taking the average &
standard deviation

		average (s.d.) in millions (10^6)
2.6.31-rc8	648.6 (14.6)
+patch		620.1 (16.5)

Achieving this reduction is by dropping clip_bdi_dirty_limit as it rereads
the counters to apply the dirty_threshold and moving this check up into
balance_dirty_pages where it has already read the counters.

Also by rearrange the for loop to only contain one copy of the limit tests
allows the pdflush test after the loop to use the local copies of the
counters rather than rereading them.

In the common case with no throttling it now calls global_page_state 5
fewer times and bdi_stat 2 fewer.

Fengguang:

This patch slightly changes behavior by replacing clip_bdi_dirty_limit()
with the explicit check (nr_reclaimable + nr_writeback >= dirty_thresh) to
avoid exceeding the dirty limit.  Since the bdi dirty limit is mostly
accurate we don't need to do routinely clip.  A simple dirty limit check
would be enough.

The check is necessary because, in principle we should throttle everything
calling balance_dirty_pages() when we're over the total limit, as said by
Peter.

We now set and clear dirty_exceeded not only based on bdi dirty limits,
but also on the global dirty limit.  The global limit check is added in
place of clip_bdi_dirty_limit() for safety and not intended as a behavior
change.  The bdi limits should be tight enough to keep all dirty pages
under the global limit at most time; occasional small exceeding should be
OK though.  The change makes the logic more obvious: the global limit is
the ultimate goal and shall be always imposed.

We may now start background writeback work based on outdated conditions.
That's safe because the bdi flush thread will (and have to) double check
the states.  It reduces overall overheads because the test based on old
states still have good chance to be right.

[akpm@linux-foundation.org] fix uninitialized dirty_exceeded
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Randy Dunlap 3c111a071d mm: fix fatal kernel-doc error
Fix a fatal kernel-doc error due to a #define coming between a function's
kernel-doc notation and the function signature.  (kernel-doc cannot handle
this)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Jan Kara f446daaea9 mm: implement writeback livelock avoidance using page tagging
We try to avoid livelocks of writeback when some steadily creates dirty
pages in a mapping we are writing out.  For memory-cleaning writeback,
using nr_to_write works reasonably well but we cannot really use it for
data integrity writeback.  This patch tries to solve the problem.

The idea is simple: Tag all pages that should be written back with a
special tag (TOWRITE) in the radix tree.  This can be done rather quickly
and thus livelocks should not happen in practice.  Then we start doing the
hard work of locking pages and sending them to disk only for those pages
that have TOWRITE tag set.

Note: Adding new radix tree tag grows radix tree node from 288 to 296
bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs.
However, the number of slab/slub items per page remains the same (13 and 7
respectively).

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:59 -07:00
Dave Chinner 9e094383b6 writeback: Add tracing to write_cache_pages
Add a trace event to the ->writepage loop in write_cache_pages to give
visibility into how the ->writepage call is changing variables within the
writeback control structure. Of most interest is how wbc->nr_to_write changes
from call to call, especially with filesystems that write multiple pages
in ->writepage.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:24:26 +02:00
Dave Chinner 028c2dd184 writeback: Add tracing to balance_dirty_pages
Tracing high level background writeback events is good, but it doesn't
give the entire picture. Add visibility into write throttling to catch IO
dispatched by foreground throttling of processing dirtying lots of pages.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:24:25 +02:00
Christoph Hellwig 9c3a8ee8a1 writeback: remove writeback_inodes_wbc
This was just an odd wrapper around writeback_inodes_wb.  Removing this
also allows to get rid of the bdi member of struct writeback_control
which was rather out of place there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-06 08:54:03 +02:00
Christoph Hellwig c5444198ca writeback: simplify and split bdi_start_writeback
bdi_start_writeback now never gets a superblock passed, so we can just remove
that case.  And to further untangle the code and flatten the call stack
split it into two trivial helpers for it's two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11 12:58:08 +02:00
Dave Chinner d87815cb20 writeback: limit write_cache_pages integrity scanning to current EOF
sync can currently take a really long time if a concurrent writer is
extending a file. The problem is that the dirty pages on the address
space grow in the same direction as write_cache_pages scans, so if
the writer keeps ahead of writeback, the writeback will not
terminate until the writer stops adding dirty pages.

For a data integrity sync, we only need to write the pages dirty at
the time we start the writeback, so we can stop scanning once we get
to the page that was at the end of the file at the time the scan
started.

This will prevent operations like copying a large file preventing
sync from completing as it will not write back pages that were
dirtied after the sync was started. This does not impact the
existing integrity guarantees, as any dirty page (old or new)
within the EOF range at the start of the scan will still be
captured.

This patch will not prevent sync from blocking on large writes into
holes. That requires more complex intervention while this patch only
addresses the common append-case of this sync holdoff.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 18:12:44 -07:00
Dave Chinner 0b5649278e writeback: pay attention to wbc->nr_to_write in write_cache_pages
If a filesystem writes more than one page in ->writepage, write_cache_pages
fails to notice this and continues to attempt writeback when wbc->nr_to_write
has gone negative - this trace was captured from XFS:

    wbc_writeback_start: towrt=1024
    wbc_writepage: towrt=1024
    wbc_writepage: towrt=0
    wbc_writepage: towrt=-1
    wbc_writepage: towrt=-5
    wbc_writepage: towrt=-21
    wbc_writepage: towrt=-85

This has adverse effects on filesystem writeback behaviour. write_cache_pages()
needs to terminate after a certain number of pages are written, not after a
certain number of calls to ->writepage are made.  This is a regression
introduced by 17bc6c30cf ("vfs: Add
no_nrwrite_index_update writeback control flag"), but cannot be reverted
directly due to subsequent bug fixes that have gone in on top of it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 18:12:44 -07:00
Jens Axboe 0e3c9a2284 Revert "writeback: fix WB_SYNC_NONE writeback from umount"
This reverts commit e913fc825d.

We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.

Conflicts:

	fs/fs-writeback.c
	mm/page-writeback.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01 11:08:43 +02:00
Jens Axboe df96e96f76 writeback: fix mixed up arguments to bdi_start_writeback()
The laptop mode timer had the nr_pages and sb_locked arguments
mixed up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:54 +02:00
Jens Axboe c2c4986edd writeback: fix problem with !CONFIG_BLOCK compilation
When CONFIG_BLOCK isn't enabled:

mm/page-writeback.c: In function 'laptop_mode_timer_fn':
mm/page-writeback.c:708: error: dereferencing pointer to incomplete type
mm/page-writeback.c:709: error: dereferencing pointer to incomplete type

Fix this by essentially eliminating the laptop sync handlers when
CONFIG_BLOCK isn't set, as most are only used from the block layer code.
The exception is laptop_sync_completion() which is used from sys_sync(),
make that an empty declaration in that case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:03 +02:00
Jens Axboe 6423104b6a writeback: fixups for !dirty_writeback_centisecs
Commit 69b62d01 fixed up most of the places where we would enter
busy schedule() spins when disabling the periodic background
writeback. This fixes up the sb timer so that it doesn't get
hammered on with the delay disabled, and ensures that it gets
rearmed if needed when /proc/sys/vm/dirty_writeback_centisecs
gets modified.

bdi_forker_task() also needs to check for !dirty_writeback_centisecs
and use schedule() appropriately, fix that up too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:00:35 +02:00