Commit Graph

3074 Commits

Author SHA1 Message Date
Alexandre Belloni 882c5e552f rtc: da9063: set uie_unsupported when relevant
The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-02 23:33:09 +02:00
Alexandre Belloni 22e7d5148d rtc: sd3078: fix manufacturer name
The proper manufacturer name is Shenzhen whwave.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20 13:10:57 +01:00
Geert Uytterhoeven 15d82d2249 rtc: sh: Fix invalid alarm warning for non-enabled alarm
When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20 11:37:50 +01:00
Stephen Boyd d6752e185c rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:

	Unbalanced IRQ 166 wake disable
	WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278

This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.

Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-By: Benson Leung <bleung@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20 11:36:46 +01:00
Linus Torvalds f47d633134 chrome platform changes for v5.1
1. SPDX identifier cleanup for platform/chrome
 2. Cleanup series between mfd and chrome/platform, moving
    cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome.
 3. Wilco EC driver
 4. Maintainership change to new group repository.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlyG4dIACgkQHwn1ewov
 5lhoqA//SXO5HU1qkhfvwUKyNsYxtIj4wDQF+j9tAPbVaOOaztq0b5D1PQgDGcEL
 SDl9FAXZtwhmPr5xiGPrPUxwn4JG+tUcgSSgIOCtClpA/SZUPt2wekAB64hLt1ui
 nkBRSgeRnXeeRE0nDh7EUrwAeaYj6yCg4AS8FMHmjWTG0tI6iivhuc39v/zDV8Br
 f4chOu/KEWS/EhItVlDBHE0mYDW2JGLSD3nqJR9MdujvYzbkN5WusJIXBDK6MOUl
 z1gqptVYyq/FQOQOCZ+vHjTNVYQ3N3NbPOnnQn4xAyYiqTQJVJv+x6dd7htncjVO
 567PFbbqbKzqrGWZOrdksxVa4JkIGfcgNG2mskRYKpEtHVOpMlHxwHqKv/93TQvw
 F0z4+43ZeAo0Fx2k+oOiDylpClDvUVOeH0z5suqIK15MZbpfWZF6d38Pz1Zwd8hY
 0TEldpyH83HiXylEuYabBwq3ABfj4VncYcMWfaW517LUrnH9nkJDNOlXQFreGTPt
 uHQPz+Xzfirk9wNwlEtfhqh3fjRWIfmiHc8bLmCB2XuJqavF0pozoQnJprw+72LR
 h4ALkUBr8laVfXYgG8SzNm/K4DlMjKqvJRY6m2b7AY8CTVgMur7ct0WJsvmECF+4
 2XDDvHwkQJt3XifVLpLgFRfR5YRlFxjwMNS8Zq0Bb/gjRqSSCo4=
 =2nC0
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

 - SPDX identifier cleanup for platform/chrome

 - Cleanup series between mfd and chrome/platform, moving cros-ec
   attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome

 - Wilco EC driver

 - Maintainership change to new group repository

* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: fix wilco-ec dependencies
  platform/chrome: wilco_ec: Add RTC driver
  platform/chrome: wilco_ec: Add support for raw commands in debugfs
  platform/chrome: Add new driver for Wilco EC
  platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
  MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
  platform/chrome: cros_ec_sysfs: remove pr_fmt() define
  platform/chrome: cros_ec_lightbar: remove pr_fmt() define
  platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
  platform/chrome: cros_ec_spi: switch to SPDX identifier
  platform/chrome: cros_ec_proto: switch to SPDX identifier
  platform/chrome: cros_ec_lpc: switch to SPDX identifier
  platform/chrome: cros_ec_i2c: switch to SPDX identifier
  platform/chrome: cros_ec_vbc: switch to SPDX identifier
  platform/chrome: cros_ec_sysfs: switch to SPDX identifier
  platform/chrome: cros_ec_lightbar: switch to SPDX identifier
  platform/chrome: cros_ec_debugfs: switch to SPDX identifier
  platform/chrome: cromeos_pstore: switch to SPDX identifier
2019-03-12 09:46:32 -07:00
Alexandre Belloni e91b94fd2b rtc: pic32: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:23:15 +01:00
Alexandre Belloni c145e5f4a4 rtc: pic32: let the core handle range
Let the core handle the RTC range instead of open coding it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 6515e23b9f rtc: pic32: convert to devm_rtc_allocate_device
This allows further improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 7d1e5bfe17 rtc: update my email address
Use my current email address.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 182ae2bb64 rtc: rv8803: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 2e17f8b982 rtc: rv8803: let the core handle range
Let the core handle the RTC range instead of open coding it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 1a9de2100d rtc: tx4939: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.

The original text refers to the COPYING file in the main directory which is
GPL v2 only so also update MODULE_LICENSE() to "GPL v2" instead of "GPL".

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04 20:21:19 +01:00
Alexandre Belloni 1ebb909d5a rtc: tx4939: use .set_time
Switch from .set_mmss to .set_time as the former is deprecated.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 23:19:30 +01:00
Alexandre Belloni e230b2c26d rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_time_to_tm now that the range is enforced by
the core.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 23:14:35 +01:00
Alexandre Belloni e866cbdf6e rtc: tx4939: set range
The TX4939 RTC is a 48bit counter that counts two on every clock edge of
32.768 KHz oscillator clock so it counts 32bit seconds.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 23:08:09 +01:00
Alexandre Belloni 72d3819744 rtc: tx4939: remove useless test
The tested condition will never happen as the core always passes a fully
set struct tm (using rtc_ktime_to_tm) to the .set_alarm callback.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 22:54:49 +01:00
Alexandre Belloni 3199fc3d74 rtc: zynqmp: let the core handle range
Let the core handle the RTC range instead of open coding it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 22:38:34 +01:00
Alexandre Belloni b8541798a8 rtc: zynqmp: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
struct before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 22:36:19 +01:00
Alexandre Belloni 30adde6b18 rtc: imx-sc: use rtc_time64_to_tm
The imx-sc driver properly sets range_max, use rtc_time64_to_tm() instead
of the deprecated rtc_time_to_tm()

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03 22:12:38 +01:00
Biju Das 51f896ffd1 rtc: rx8581: Add support for Epson rx8571 RTC
Add support for Epson rx8571 real-time clock. rx8571 rtc is compatible
with rx8581,except that rx8571 has additional 16 bytes of RAM.

16 bytes of nvmem is supported and exposed in sysfs (# is the instance
number,starting with 0): /sys/bus/nvmem/devices/rx8571-#/nvmem

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-02 22:20:58 +01:00
Alexey Roslyakov 069e28e571 rtc: pcf85063: remove dead code
Some of defines are not in use since
7b5768486a. Remove it to make the code
easier to read and understand.

Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-02 21:55:47 +01:00
Alexandre Belloni ad5ea5b9d5 rtc: remove rtc_class_ops.read_callback
Since commit 416f0e8056 ("RTC: sa1100: Update the sa1100 RTC driver."),
the last user of .read_callback is gone. It has been 8 years and now new
user appeared. Simply remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-25 21:20:45 +01:00
Nick Crews 0d2f2a3da1 platform/chrome: wilco_ec: Add RTC driver
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.

The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.

To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:36:53 +01:00
Artem Panfilov 67075b63cc rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar
module with I2C interface.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-18 22:39:30 +01:00
Alexandre Belloni 3cbb7b638f rtc: hid-sensor-time: stop selecting IIO
Make RTC_DRV_HID_SENSOR_TIME depend on IIO and HID_SENSOR_HUB to remove
possible circular dependencies as this is the only symbol selecting those.

Suggested-by: Florian Lohoff <f@zz.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Alexandre Belloni e6e7376cfd rtc: rv3028: add new driver
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock
Module that incorporates an integrated CMOS circuit together with an XTAL.
It has an i2c interface.

The driver handles date/time, alarms, trickle charging, timestamping,
frequency offset correction, EEPROM and NVRAM.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Trent Piepho c3544f6f51 rtc: isl1208: Add new style nvmem support to driver
Add support for the RTC's NVRAM using the standard nvmem support that is
part of the Linux RTC framework.

This driver already has a sysfs attribute that provides access to the
RTC's NVRAM as a single 16-bit value.  Some chips have more than two
bytes of NVRAM, so this will not work for them.  It's also non-standard.

This sysfs attribute is left in for backward compatibility, but will only
be able to read the first two bytes of NVRAM.  The nvmem interface will
allow access to all NVRAM, e.g. eight bytes on the isl1218.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Trent Piepho 5909b87db8 rtc: isl1208: Support more chip variations
Add more support in the driver for dealing with differences in is1208
compatible chips.  Put the 1208, 1209, 1218, and 1219 in the list and
encode information about nvram size, tamper, and timestamp features.

This adds support for the isl1209, which has a tamper detect but no
timestamp feature.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Trent Piepho ed3c52a075 rtc: isl1208: Introduce driver state struct
This driver has no state of its own, depending entirely on what is in
the generic rtc device.

Intoduce a state struct.  For now it only contains a pointer to the rtc
device struct, but future patches will add more data.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Alexandre Belloni 5736610ab6 rtc: meson: remove useless rtc_nvmem_unregister call
rtc_nvmem_unregister() is called on rtc_device release so it is not
necessary to call it from the driver.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:28:39 +01:00
Martin Blumenstingl d8fe6009aa rtc: support for the Amlogic Meson RTC
Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8,
Meson8b and Meson8m2 SoCs.

The RTC is split in to two parts, which are both managed by this driver:
- the AHB front end
- and a simple serial connection to the actual registers

The RTC_COUNTER register which holds the time is 32-bits wide.

There are four 32-bit wide (in total: 16 bytes) "regmem" registers which
are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store
data which needs to survive a suspend / resume cycle.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[resurrected Ben's patches after 2 years]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-11 09:41:21 +01:00
Oliver.Rohe@wago.com 09832dc059 rtc: rs5c372: Fix reading from rtc when the oscillator got interrupted.
When the oscillator of the rtc gets interrupted,
e.g. due to an empty battery, reading from the rtc will now return an error
and the oscillator bit will be cleared, once the rtc is successfully reset.

Signed-off-by: Oliver Rohe <oliver.rohe@wago.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-11 09:41:21 +01:00
Alexandre Belloni 7dd63ec076 rtc: imx-sc: depend on HAVE_ARM_SMCCC
Fix the following build issue:

drivers/rtc/rtc-imx-sc.o: In function `imx_sc_rtc_set_time':
>> rtc-imx-sc.c:(.text+0x212): undefined reference to `__arm_smccc_smc'

Fixes: 13a929f38a ("rtc: imx-sc: add rtc set time support")
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-08 12:08:39 +01:00
Colin Ian King e422808860 rtc: pm8xxx: fix unintended sign extension
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes: 9a9a54ad7a ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-08 09:30:13 +01:00
Colin Ian King fb0b322537 rtc: 88pm80x: fix unintended sign extension
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")

Fixes: 2985c29c19 ("rtc: Add rtc support to 88PM80X PMIC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-08 09:30:13 +01:00
Colin Ian King dc9e471606 rtc: 88pm860x: fix unintended sign extension
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes: 008b30408c ("mfd: Add rtc support to 88pm860x")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-08 09:30:13 +01:00
Uwe Kleine-König 3f929cad94 rtc: ds1307: rx8130: Fix alarm handling
When the EXTENSION.WADA bit is set, register 0x19 contains a bitmap of
week days, not a day of month. As Linux only handles a single alarm
without repetition using day of month is more flexible, so clear this
bit. (Otherwise a value depending on time.tm_wday would have to be
written to register 0x19.)

Also optimize setting the AIE bit to use a single register write instead
of a bulk write of three registers.

Fixes: ee0981be77 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:55:48 +01:00
Uwe Kleine-König 501f98266c rtc: ds1307: rx8130: honor Voltage Loss Flag when reading the time
When voltage dropped since the RTC was last set the reported time is not
reliable. In this case return an error indicator instead of a bogus
time.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:55:46 +01:00
Uwe Kleine-König 3ffd4a2fcf rtc: ds1307: correct register offset for rx8130
While rx8130 has a register offset of 0x10 in its chip_desc, this isn't
used when regmap accesses are done. So add 0x10 to access the right
locations.

Fixes: ee0981be77 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:55:44 +01:00
Uwe Kleine-König d0e3f61b08 rtc: ds1307: forward declare chips array instead of a bunch of functions
There used to be 16 declarations for static functions. By just adding a
declaration for the chips array and reordering the functions the 16
function declarations can be dropped.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:55:41 +01:00
Uwe Kleine-König 92cbf12fc2 rtc: ds1307: Move register definitions to start of file
This allows to use the register offsets in all functions
which is needed in one of the next patches.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:55:39 +01:00
Anson Huang 13a929f38a rtc: imx-sc: add rtc set time support
This patch adds i.MX system controller RTC set time support, the
RTC set time is implemented via SIP(silicon provider) runtime
service call and ARM-Trusted-Firmware will communicate with system
controller via MU(message unit) IPC to set RTC time.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-07 20:45:39 +01:00
Oliver.Rohe@wago.com 761acdda5c rtc: rs5c372: r2221: fix to use the correct XSTP bit
The Ricoh chips have slightly different register layouts
and the r2221 chip uses bit 5 as the oscillator halt sensor bit.

Signed-off-by: Olive Rohe <oliver.rohe@wago.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-05 23:11:31 +01:00
Anson Huang edb190cb17 rtc: snvs: make sure clock is enabled for interrupt handle
During system suspend, the SNVS RTC's clock will be disabled in
noirq suspend phase, but SNVS RTC's alarm interrupt could still
arrive, system will hang if SNVS RTC driver tries to access register
without clock enabled, this patch fixes the issue of this scenario.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-05 23:11:31 +01:00
Colin Ian King f0c04c2767 rtc: ds1672: fix unintended sign extension
Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#138801 ("Unintended sign extension")

Fixes: edf1aaa31f ("[PATCH] RTC subsystem: DS1672 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-05 23:11:31 +01:00
Marek Vasut 75455e258e rtc: abx80x: Configure reserved bits in RV1805
The RV1805 uses smaller package than the AB1805, discern those two
chips based on the compatible value and configure reserved bits in
the RV1805 to prevent current leakage and accidental test mode entry.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: linux-rtc@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-30 16:09:36 +01:00
YueHaibing a3b8bcbafa rtc: sd3078: fix platform_no_drv_owner.cocci warnings
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-23 15:42:31 +01:00
Jan Kotas 42986fb811 rtc: Add Cadence RTC driver
This patch adds a driver for Cadence RTC controller.

It can be enabled with RTC_DRV_CADENCE Kconfig option.
It supports waking system from sleep modes.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22 19:18:27 +01:00
Eric Wong 2a4daadd4d rtc: cmos: ignore bogus century byte
Older versions of Libreboot and Coreboot had an invalid value
(`3' in my case) in the century byte affecting the GM45 in
the Thinkpad X200.  Not everybody's updated their firmwares,
and Linux <= 4.2 was able to read the RTC without problems,
so workaround this by ignoring invalid values.

Fixes: 3c217e51d8 ("rtc: cmos: century support")

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sylvain Chouleur <sylvain.chouleur@intel.com>
Cc: Patrick McDermott <patrick.mcdermott@libiquity.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22 19:05:32 +01:00
Kangjie Lu 9a20b5e35a rtc: hym8563: fix a missing check of block data read
When i2c_smbus_read_i2c_block_data() fails, the read data in "buf" could
be incorrect and should not be used. The fix checks if
i2c_smbus_read_i2c_block_data fails, and if so, return its error code
upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22 19:03:43 +01:00