Commit Graph

98 Commits

Author SHA1 Message Date
Yigal Korman ea6ca600eb block: expose QUEUE_FLAG_DAX in sysfs
Provides the ability to identify DAX enabled devices in userspace.

Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:01:08 -06:00
Jens Axboe 93e9d8e836 block: add ability to flag write back caching on a device
Add an internal helper and flag for setting whether a queue has
write back caching, or write through (or none). Add a sysfs file
to show this as well, and make it changeable from user space.

This will replace the (awkward) blk_queue_flush() interface that
drivers currently use to inform the block layer of write cache state
and capabilities.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 15:46:27 -06:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Alan 18f922d037 blk: fix overflow in queue_discard_max_hw_show
We get this right for queue_discard_max_show but not max_hw_show. Follow the
same pattern as queue_discard_max_show instead so that we don't truncate.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-17 10:20:42 -07:00
James Bottomley be9e2f775f Merge branch 'mkp-fixes' into fixes 2015-12-03 09:32:33 -08:00
Martin K. Petersen ca369d51b3 block/sd: Fix device-imposed transfer length limits
Commit 4f258a4634 ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.

Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.

 - Introduce a new queue limit, max_dev_sectors, which is used by the
   ULD to signal the maximum sectors for a REQ_TYPE_FS request.

 - Ensure that max_dev_sectors is correctly stacked and taken into
   account when overriding max_sectors through sysfs.

 - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
   values for later processing.

 - In sd_revalidate() set the queue's max_dev_sectors based on the
   MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
   is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
   field size.

 - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
   VPD--if reported and sane--to signal the preferred device transfer
   size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.

 - blk_limits_max_hw_sectors() is no longer used and can be removed.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: sweeneygj@gmx.com
Tested-by: Arzeets <anatol.pomozov@gmail.com>
Tested-by: David Eisner <david.eisner@oriel.oxon.org>
Tested-by: Mario Kicherer <dev@kicherer.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-25 21:38:58 -05:00
Jens Axboe 05229beedd block: add block polling support
Add basic support for polling for specific IO to complete. This uses
the cookie that blk-mq passes back, which enables the block layer
to pass this cookie to the driver to spin for a specific request.

This will be combined with request latency tracking, so we can make
qualified decisions about when to poll and when not to. For now, for
benchmark purposes, we add a sysfs file that controls whether polling
is enabled or not.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:47 -07:00
Linus Torvalds 527d1529e3 Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-block
Pull block integrity updates from Jens Axboe:
 ""This is the joint work of Dan and Martin, cleaning up and improving
  the support for block data integrity"

* 'for-4.4/integrity' of git://git.kernel.dk/linux-block:
  block, libnvdimm, nvme: provide a built-in blk_integrity nop profile
  block: blk_flush_integrity() for bio-based drivers
  block: move blk_integrity to request_queue
  block: generic request_queue reference counting
  nvme: suspend i/o during runtime blk_integrity_unregister
  md: suspend i/o during runtime blk_integrity_unregister
  md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown
  block: Inline blk_integrity in struct gendisk
  block: Export integrity data interval size in sysfs
  block: Reduce the size of struct blk_integrity
  block: Consolidate static integrity profile properties
  block: Move integrity kobject to struct gendisk
2015-11-04 20:51:48 -08:00
Dan Williams 3ef28e83ab block: generic request_queue reference counting
Allow pmem, and other synchronous/bio-based block drivers, to fallback
on a per-cpu reference count managed by the core for tracking queue
live/dead state.

The existing per-cpu reference count for the blk_mq case is promoted to
be used in all block i/o scenarios.  This involves initializing it by
default, waiting for it to drop to zero at exit, and holding a live
reference over the invocation of q->make_request_fn() in
generic_make_request().  The blk_mq code continues to take its own
reference per blk_mq request and retains the ability to freeze the
queue, but the check that the queue is frozen is moved to
generic_make_request().

This fixes crash signatures like the following:

 BUG: unable to handle kernel paging request at ffff880140000000
 [..]
 Call Trace:
  [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70
  [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem]
  [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem]
  [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0
  [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110
  [<ffffffff8141f966>] submit_bio+0x76/0x170
  [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160
  [<ffffffff81286e62>] submit_bh+0x12/0x20
  [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170
  [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90
  [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270
  [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30
  [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250
  [<ffffffff81303494>] ext4_put_super+0x64/0x360
  [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:43:41 -06:00
Tejun Heo b02176f30c block: don't release bdi while request_queue has live references
bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e871 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: a13f35e871 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.com
Reviewed-by: Jan Kara <jack@suse.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-15 09:53:28 -06:00
Kent Overstreet 54efd50bfd block: make generic_make_request handle arbitrarily sized bios
The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:31:33 -06:00
Jens Axboe 0034af0365 block: make /sys/block/<dev>/queue/discard_max_bytes writeable
Lots of devices support huge discard sizes these days. Depending
on how the device handles them internally, huge discards can
introduce massive latencies (hundreds of msec) on the device side.

We have a sysfs file, discard_max_bytes, that advertises the max
hardware supported discard size. Make this writeable, and split
the settings into a soft and hard limit. This can be set from
'discard_granularity' and up to the hardware limit.

Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw
set limit.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Linus Torvalds e4bc13adfd Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block
Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...
2015-06-25 16:00:17 -07:00
Tejun Heo 66114cad64 writeback: separate out include/linux/backing-dev-defs.h
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:34 -06:00
Tejun Heo eea8f41cc5 blkcg: move block/blk-cgroup.h to include/linux/blk-cgroup.h
cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:33 -06:00
NeilBrown 6cd18e711d block: destroy bdi before blockdev is unregistered.
Because of the peculiar way that md devices are created (automatically
when the device node is opened), a new device can be created and
registered immediately after the
	blk_unregister_region(disk_devt(disk), disk->minors);
call in del_gendisk().

Therefore it is important that all visible artifacts of the previous
device are removed before this call.  In particular, the 'bdi'.

Since:
commit c4db59d31e
Author: Christoph Hellwig <hch@lst.de>
    fs: don't reassign dirty inodes to default_backing_dev_info

moved the
   device_unregister(bdi->dev);
call from bdi_unregister() to bdi_destroy() it has been quite easy to
lose a race and have a new (e.g.) "md127" be created after the
blk_unregister_region() call and before bdi_destroy() is ultimately
called by the final 'put_disk', which must come after del_gendisk().

The new device finds that the bdi name is already registered in sysfs
and complains

> [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70()
> [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127'

We can fix this by moving the bdi_destroy() call out of
blk_release_queue() (which can happen very late when a refcount
reaches zero) and into blk_cleanup_queue() - which happens exactly when the md
device driver calls it.

Then it is only necessary for md to call blk_cleanup_queue() before
del_gendisk().  As loop.c devices are also created on demand by
opening the device node, we make the same change there.

Fixes: c4db59d31e
Reported-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org (v4.0)
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27 10:27:20 -06:00
Ming Lei e09aae7ede blk-mq: release mq's kobjects in blk_release_queue()
The kobject memory inside blk-mq hctx/ctx shouldn't have been freed
before the kobject is released because driver core can access it freely
before its release.

We can't do that in all ctx/hctx/mq_kobj's release handler because
it can be run before blk_cleanup_queue().

Given mq_kobj shouldn't have been introduced, this patch simply moves
mq's release into blk_release_queue().

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-29 08:30:51 -08:00
Bart Van Assche 45a9c9d909 blk-mq: Fix a use-after-free
blk-mq users are allowed to free the memory request_queue.tag_set
points at after blk_cleanup_queue() has finished but before
blk_release_queue() has started. This can happen e.g. in the SCSI
core. The SCSI core namely embeds the tag_set structure in a SCSI
host structure. The SCSI host structure is freed by
scsi_host_dev_release(). This function is called after
blk_cleanup_queue() finished but can be called before
blk_release_queue().

This means that it is not safe to access request_queue.tag_set from
inside blk_release_queue(). Hence remove the blk_sync_queue() call
from blk_release_queue(). This call is not necessary - outstanding
requests must have finished before blk_release_queue() is
called. Additionally, move the blk_mq_free_queue() call from
blk_release_queue() to blk_cleanup_queue() to avoid that struct
request_queue.tag_set gets accessed after it has been freed.

This patch avoids that the following kernel oops can be triggered
when deleting a SCSI host for which scsi-mq was enabled:

Call Trace:
 [<ffffffff8109a7c4>] lock_acquire+0xc4/0x270
 [<ffffffff814ce111>] mutex_lock_nested+0x61/0x380
 [<ffffffff812575f0>] blk_mq_free_queue+0x30/0x180
 [<ffffffff8124d654>] blk_release_queue+0x84/0xd0
 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0
 [<ffffffff8126c140>] kobject_put+0x30/0x70
 [<ffffffff81245895>] blk_put_queue+0x15/0x20
 [<ffffffff8125c409>] disk_release+0x99/0xd0
 [<ffffffff8133d056>] device_release+0x36/0xb0
 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0
 [<ffffffff8126c140>] kobject_put+0x30/0x70
 [<ffffffff8125a78a>] put_disk+0x1a/0x20
 [<ffffffff811d4cb5>] __blkdev_put+0x135/0x1b0
 [<ffffffff811d56a0>] blkdev_put+0x50/0x160
 [<ffffffff81199eb4>] kill_block_super+0x44/0x70
 [<ffffffff8119a2a4>] deactivate_locked_super+0x44/0x60
 [<ffffffff8119a87e>] deactivate_super+0x4e/0x70
 [<ffffffff811b9833>] cleanup_mnt+0x43/0x90
 [<ffffffff811b98d2>] __cleanup_mnt+0x12/0x20
 [<ffffffff8107252c>] task_work_run+0xac/0xe0
 [<ffffffff81002c01>] do_notify_resume+0x61/0xa0
 [<ffffffff814d2c58>] int_signal+0x12/0x17

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robert Elliott <elliott@hp.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-09 09:07:13 -07:00
Linus Torvalds d3dc366bba Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-block
Pull core block layer changes from Jens Axboe:
 "This is the core block IO pull request for 3.18.  Apart from the new
  and improved flush machinery for blk-mq, this is all mostly bug fixes
  and cleanups.

   - blk-mq timeout updates and fixes from Christoph.

   - Removal of REQ_END, also from Christoph.  We pass it through the
     ->queue_rq() hook for blk-mq instead, freeing up one of the request
     bits.  The space was overly tight on 32-bit, so Martin also killed
     REQ_KERNEL since it's no longer used.

   - blk integrity updates and fixes from Martin and Gu Zheng.

   - Update to the flush machinery for blk-mq from Ming Lei.  Now we
     have a per hardware context flush request, which both cleans up the
     code should scale better for flush intensive workloads on blk-mq.

   - Improve the error printing, from Rob Elliott.

   - Backing device improvements and cleanups from Tejun.

   - Fixup of a misplaced rq_complete() tracepoint from Hannes.

   - Make blk_get_request() return error pointers, fixing up issues
     where we NULL deref when a device goes bad or missing.  From Joe
     Lawrence.

   - Prep work for drastically reducing the memory consumption of dm
     devices from Junichi Nomura.  This allows creating clone bio sets
     without preallocating a lot of memory.

   - Fix a blk-mq hang on certain combinations of queue depths and
     hardware queues from me.

   - Limit memory consumption for blk-mq devices for crash dump
     scenarios and drivers that use crazy high depths (certain SCSI
     shared tag setups).  We now just use a single queue and limited
     depth for that"

* 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits)
  block: Remove REQ_KERNEL
  blk-mq: allocate cpumask on the home node
  bio-integrity: remove the needless fail handle of bip_slab creating
  block: include func name in __get_request prints
  block: make blk_update_request print prefix match ratelimited prefix
  blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio
  block: fix alignment_offset math that assumes io_min is a power-of-2
  blk-mq: Make bt_clear_tag() easier to read
  blk-mq: fix potential hang if rolling wakeup depth is too high
  block: add bioset_create_nobvec()
  block: use bio_clone_fast() in blk_rq_prep_clone()
  block: misplaced rq_complete tracepoint
  sd: Honor block layer integrity handling flags
  block: Replace strnicmp with strncasecmp
  block: Add T10 Protection Information functions
  block: Don't merge requests if integrity flags differ
  block: Integrity checksum flag
  block: Relocate bio integrity flags
  block: Add a disk flag to block integrity profile
  block: Add prefix to block integrity profile flags
  ...
2014-10-18 11:53:51 -07:00
Ming Lei f70ced0917 blk-mq: support per-distpatch_queue flush machinery
This patch supports to run one single flush machinery for
each blk-mq dispatch queue, so that:

- current init_request and exit_request callbacks can
cover flush request too, then the buggy copying way of
initializing flush request's pdu can be fixed

- flushing performance gets improved in case of multi hw-queue

In fio sync write test over virtio-blk(4 hw queues, ioengine=sync,
iodepth=64, numjobs=4, bs=4K), it is observed that througput gets
increased a lot over my test environment:
	- throughput: +70% in case of virtio-blk over null_blk
	- throughput: +30% in case of virtio-blk over SSD image

The multi virtqueue feature isn't merged to QEMU yet, and patches for
the feature can be found in below tree:

	git://kernel.ubuntu.com/ming/qemu.git  	v2.1.0-mq.4

And simply passing 'num_queues=4 vectors=5' should be enough to
enable multi queue(quad queue) feature for QEMU virtio-blk.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25 15:22:45 -06:00
Ming Lei ba483388e3 block: remove blk_init_flush() and its pair
Now mission of the two helpers is over, and just call
blk_alloc_flush_queue() and blk_free_flush_queue() directly.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25 15:22:41 -06:00
Ming Lei f355265571 block: introduce blk_init_flush and its pair
These two temporary functions are introduced for holding flush
initialization and de-initialization, so that we can
introduce 'flush queue' easier in the following patch. And
once 'flush queue' and its allocation/free functions are ready,
they will be removed for sake of code readability.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25 15:22:35 -06:00
Tejun Heo 17497acbdc blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
blk-mq uses percpu_ref for its usage counter which tracks the number
of in-flight commands and used to synchronously drain the queue on
freeze.  percpu_ref shutdown takes measureable wallclock time as it
involves a sched RCU grace period.  This means that draining a blk-mq
takes measureable wallclock time.  One would think that this shouldn't
matter as queue shutdown should be a rare event which takes place
asynchronously w.r.t. userland.

Unfortunately, SCSI probing involves synchronously setting up and then
tearing down a lot of request_queues back-to-back for non-existent
LUNs.  This means that SCSI probing may take above ten seconds when
scsi-mq is used.

  [    0.949892] scsi host0: Virtio SCSI HBA
  [    1.007864] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    1.1. PQ: 0 ANSI: 5
  [    1.021299] scsi 0:0:1:0: Direct-Access     QEMU     QEMU HARDDISK    1.1. PQ: 0 ANSI: 5
  [    1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz

  <stall>

  [   16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [   16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0
  [   16.194099] osd: LOADED open-osd 0.2.1
  [   16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  [   16.208478] sd 0:0:0:0: [sda] Write Protect is off
  [   16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [   16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
  [   16.223264] sd 0:0:1:0: [sdb] Write Protect is off
  [   16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

This is also the reason why request_queues start in bypass mode which
is ended on blk_register_queue() as shutting down a fully functional
queue also involves a RCU grace period and the queues for non-existent
SCSI devices never reach registration.

blk-mq basically needs to do the same thing - start the mq in a
degraded mode which is faster to shut down and then make it fully
functional only after the queue reaches registration.  percpu_ref
recently grew facilities to force atomic operation until explicitly
switched to percpu mode, which can be used for this purpose.  This
patch makes blk-mq initialize q->mq_usage_counter in atomic mode and
switch it to percpu mode only once blk_register_queue() is reached.

Note that this issue was previously worked around by 0a30288da1
("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during
probe") for v3.17.  The temp fix was reverted in preparation of adding
persistent atomic mode to percpu_ref by 9eca80461a ("Revert "blk-mq,
percpu_ref: implement a kludge for SCSI blk-mq stall during probe"").
This patch and the prerequisite percpu_ref changes will be merged
during v3.18 devel cycle.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de
Fixes: add703fda9 ("blk-mq: use percpu_ref for mq usage count")
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 13:37:21 -04:00
Alan Stern df35c7c912 Block: fix unbalanced bypass-disable in blk_register_queue
When a queue is registered, the block layer turns off the bypass
setting (because bypass is enabled when the queue is created).  This
doesn't work well for queues that are unregistered and then registered
again; we get a WARNING because of the unbalanced calls to
blk_queue_bypass_end().

This patch fixes the problem by making blk_register_queue() call
blk_queue_bypass_end() only the first time the queue is registered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tejun Heo <tj@kernel.org>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-09 10:44:24 -06:00
Tejun Heo 776687bce4 block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
Currently, both blk_queue_bypass_start() and blk_mq_freeze_queue()
skip queue draining if bypass_depth was already above zero.  The
assumption is that the one which bumped the bypass_depth should have
performed draining already; however, there's nothing which prevents a
new instance of bypassing/freezing from starting before the previous
one finishes draining.  The current code may allow the later
bypassing/freezing instances to complete while there still are
in-flight requests which haven't finished draining.

Fix it by draining regardless of bypass_depth.  We still skip draining
from blk_queue_bypass_start() while the queue is initializing to avoid
introducing excessive delays during boot.  INIT_DONE setting is moved
above the initial blk_queue_bypass_end() so that bypassing attempts
can't slip inbetween.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:29:17 -06:00
Ming Lei 3d2936f457 block: only allocate/free mq_usage_counter in blk-mq
The percpu counter is only used for blk-mq, so move
its allocation and free inside blk-mq, and don't
allocate it for legacy queue device.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 09:37:08 -06:00
Jens Axboe e3a2b3f931 blk-mq: allow changing of queue depth through sysfs
For request_fn based devices, the block layer exports a 'nr_requests'
file through sysfs to allow adjusting of queue depth on the fly.
Currently this returns -EINVAL for blk-mq, since it's not wired up.
Wire this up for blk-mq, so that it now also always dynamic
adjustments of the allowed queue depth for any given block device
managed by blk-mq.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-20 11:49:02 -06:00
Christoph Hellwig 18741986a4 blk-mq: rework flush sequencing logic
Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path.  This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers.  To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.

This effectively reverts most of

    "blk-mq: fix for flush deadlock"

and

    "blk-mq: Don't reserve a tag for flush request"

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-10 09:29:00 -07:00
Ming Lei 3edcc0ce85 block: blk-mq: don't export blk_mq_free_queue()
blk_mq_free_queue() is called from release handler of
queue kobject, so it needn't be called from drivers.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-31 09:53:05 -07:00
Christoph Hellwig 0a06ff068f kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:22 +09:00
Jens Axboe 320ae51fee blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:

- The classic request_fn based approach, where drivers use struct
  request units for IO. The block layer provides various helper
  functionalities to let drivers share code, things like tag
  management, timeout handling, queueing, etc.

- The "stacked" approach, where a driver squeezes in between the
  block layer and IO submitter. Since this bypasses the IO stack,
  driver generally have to manage everything themselves.

With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.

The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.

This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.

blk-mq provides various helper functions, which include:

- Scalable support for request tagging. Most devices need to
  be able to uniquely identify a request both in the driver and
  to the hardware. The tagging uses per-cpu caches for freed
  tags, to enable cache hot reuse.

- Timeout handling without tracking request on a per-device
  basis. Basically the driver should be able to get a notification,
  if a request happens to fail.

- Optional support for non 1:1 mappings between issue and
  submission queues. blk-mq can redirect IO completions to the
  desired location.

- Support for per-request payloads. Drivers almost always need
  to associate a request structure with some driver private
  command structure. Drivers can tell blk-mq this at init time,
  and then any request handed to the driver will have the
  required size of memory associated with it.

- Support for merging of IO, and plugging. The stacked model
  gets neither of these. Even for high IOPS devices, merging
  sequential IO reduces per-command overhead and thus
  increases bandwidth.

For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).

Contributions in this patch from the following people:

Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25 11:56:00 +01:00
Jingoo Han ed751e683c block/blk-sysfs.c: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:56:56 -07:00
Arnd Bergmann c678ef5286 block: avoid using uninitialized value in from queue_var_store
As found by gcc-4.8, the QUEUE_SYSFS_BIT_FNS macro creates functions
that use a value generated by queue_var_store independent of whether
that value was set or not.

block/blk-sysfs.c: In function 'queue_store_nonrot':
block/blk-sysfs.c:244:385: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized]

Unlike most other such warnings, this one is not a false positive,
writing any non-number string into the sysfs files indeed has
an undefined result, rather than returning an error.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-04-03 21:53:57 +02:00
Tejun Heo 548bc8e1b3 block: RCU free request_queue
RCU free request_queue so that blkcg_gq->q can be dereferenced under
RCU lock.  This will be used to implement hierarchical stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Bart Van Assche 3f3299d5c0 block: Rename queue dead flag
QUEUE_FLAG_DEAD is used to indicate that queuing new requests must
stop. After this flag has been set queue draining starts. However,
during the queue draining phase it is still safe to invoke the
queue's request_fn, so QUEUE_FLAG_DYING is a better name for this
flag.

This patch has been generated by running the following command
over the kernel source tree:

git grep -lEw 'blk_queue_dead|QUEUE_FLAG_DEAD' |
    xargs sed -i.tmp -e 's/blk_queue_dead/blk_queue_dying/g'      \
        -e 's/QUEUE_FLAG_DEAD/QUEUE_FLAG_DYING/g';                \
sed -i.tmp -e "s/QUEUE_FLAG_DYING$(printf \\t)*5/QUEUE_FLAG_DYING$(printf \\t)5/g" \
    include/linux/blkdev.h;                                       \
sed -i.tmp -e 's/ DEAD/ DYING/g' -e 's/dead queue/a dying queue/' \
    -e 's/Dead queue/A dying queue/' block/blk-core.c

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-06 14:30:58 +01:00
Tejun Heo 749fefe677 block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
b82d4b197c ("blkcg: make request_queue bypassing on allocation") made
request_queues bypassed on allocation to avoid switching on and off
bypass mode on a queue being initialized.  Some drivers allocate and
then destroy a lot of queues without fully initializing them and
incurring bypass latency overhead on each of them could add upto
significant overhead.

Unfortunately, blk_init_allocated_queue() is never used by queues of
bio-based drivers, which means that all bio-based driver queues are in
bypass mode even after initialization and registration complete
successfully.

Due to the limited way request_queues are used by bio drivers, this
problem is hidden pretty well but it shows up when blk-throttle is
used in combination with a bio-based driver.  Trying to configure
(echoing to cgroupfs file) blk-throttle for a bio-based driver hangs
indefinitely in blkg_conf_prep() waiting for bypass mode to end.

This patch moves the initial blk_queue_bypass_end() call from
blk_init_allocated_queue() to blk_register_queue() which is called for
any userland-visible queues regardless of its type.

I believe this is correct because I don't think there is any block
driver which needs or wants working elevator and blk-cgroup on a queue
which isn't visible to userland.  If there are such users, we need a
different solution.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au>
Cc: stable@vger.kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-21 15:32:57 +02:00
Martin K. Petersen 4363ac7c13 block: Implement support for WRITE SAME
The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.

This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20 14:31:45 +02:00
Dave Reisner b1f3b64d76 block: reject invalid queue attribute values
Instead of using simple_strtoul which "converts" invalid numbers to 0,
use strict_strtoul and perform error checking to ensure that userspace
passes us a valid unsigned long. This addresses problems with functions
such as writev, which might want to write a trailing newline -- the
newline should rightfully be rejected, but the value preceeding it
should be preserved.

Fixes BZ#46981.

Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-09 10:39:18 +02:00
Tejun Heo a051661ca6 blkcg: implement per-blkg request allocation
Currently, request_queue has one request_list to allocate requests
from regardless of blkcg of the IO being issued.  When the unified
request pool is used up, cfq proportional IO limits become meaningless
- whoever grabs the next request being freed wins the race regardless
of the configured weights.

This can be easily demonstrated by creating a blkio cgroup w/ very low
weight, put a program which can issue a lot of random direct IOs there
and running a sequential IO from a different cgroup.  As soon as the
request pool is used up, the sequential IO bandwidth crashes.

This patch implements per-blkg request_list.  Each blkg has its own
request_list and any IO allocates its request from the matching blkg
making blkcgs completely isolated in terms of request allocation.

* Root blkcg uses the request_list embedded in each request_queue,
  which was renamed to @q->root_rl from @q->rq.  While making blkcg rl
  handling a bit harier, this enables avoiding most overhead for root
  blkcg.

* Queue fullness is properly per request_list but bdi isn't blkcg
  aware yet, so congestion state currently just follows the root
  blkcg.  As writeback isn't aware of blkcg yet, this works okay for
  async congestion but readahead may get the wrong signals.  It's
  better than blkcg completely collapsing with shared request_list but
  needs to be improved with future changes.

* After this change, each block cgroup gets a full request pool making
  resource consumption of each cgroup higher.  This makes allowing
  non-root users to create cgroups less desirable; however, note that
  allowing non-root users to directly manage cgroups is already
  severely broken regardless of this patch - each block cgroup
  consumes kernel memory and skews IO weight (IO weights are not
  hierarchical).

v2: queue-sysfs.txt updated and patch description udpated as suggested
    by Vivek.

v3: blk_get_rl() wasn't checking error return from
    blkg_lookup_create() and may cause oops on lookup failure.  Fix it
    by falling back to root_rl on blkg lookup failures.  This problem
    was spotted by Rakesh Iyer <rni@google.com>.

v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in
    request waitqueue".  blk_drain_queue() now wakes up waiters on all
    blkg->rl on the target queue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-26 18:42:49 -04:00
Tejun Heo 5b788ce3e2 block: prepare for multiple request_lists
Request allocation is about to be made per-blkg meaning that there'll
be multiple request lists.

* Make queue full state per request_list.  blk_*queue_full() functions
  are renamed to blk_*rl_full() and takes @rl instead of @q.

* Rename blk_init_free_list() to blk_init_rl() and make it take @rl
  instead of @q.  Also add @gfp_mask parameter.

* Add blk_exit_rl() instead of destroying rl directly from
  blk_release_queue().

* Add request_list->q and make request alloc/free functions -
  blk_free_request(), [__]freed_request(), __get_request() - take @rl
  instead of @q.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-25 11:53:52 +02:00
Tejun Heo e8989fae38 blkcg: unify blkg's for blkcg policies
Currently, blkg is per cgroup-queue-policy combination.  This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.

This patch make blkg's per cgroup-queue and let them serve all
policies.  blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.

As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass.  This patch adds blkg_root_update()
to update root blkg in place on policy change.  This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.

-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
     comment wasn't updated according to the function change.  Fixed.
     Both pointed out by Vivek.

-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
     all policies.  This freed root pd during elvswitch before the
     last queue finished exiting and led to oops.  Directly invoke
     update_root_blkg_pd() only on BLKIO_POLICY_PROP from
     cfq_exit_queue().  This also is closer to what will be done with
     proper in-place blkg update.  Reported by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo 5efd611351 blkcg: add blkcg_{init|drain|exit}_queue()
Currently block core calls directly into blk-throttle for init, drain
and exit.  This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions.  This is to give more control and
visiblity to blkcg core layer for proper layering.  Further patches
will add logic common to blkcg policies to the functions.

While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo 7e5a879449 block, cfq: move io_cq exit/release to blk-ioc.c
With kmem_cache managed by blk-ioc, io_cq exit/release can be moved to
blk-ioc too.  The odd ->io_cq->exit/release() callbacks are replaced
with elevator_ops->elevator_exit_icq_fn() with unlinking from both ioc
and q, and freeing automatically handled by blk-ioc.  The elevator
operation only need to perform exit operation specific to the elevator
- in cfq's case, exiting the cfqq's.

Also, clearing of io_cq's on q detach is moved to block core and
automatically performed on elevator switch and q release.

Because the q io_cq points to might be freed before RCU callback for
the io_cq runs, blk-ioc code should remember to which cache the io_cq
needs to be freed when the io_cq is released.  New field
io_cq->__rcu_icq_cache is added for this purpose.  As both the new
field and rcu_head are used only after io_cq is released and the
q/ioc_node fields aren't, they are put into unions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:42 +01:00
Tejun Heo a73f730d01 block, cfq: move cfqd->cic_index to q->id
cfq allocates per-queue id using ida and uses it to index cic radix
tree from io_context.  Move it to q->id and allocate on queue init and
free on queue release.  This simplifies cfq a bit and will allow for
further improvements of io context life-cycle management.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Tejun Heo 34f6055c80 block: add blk_queue_dead()
There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Tejun Heo c9a929dde3 block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
request_queue is refcounted but actually depdends on lifetime
management from the queue owner - on blk_cleanup_queue(), block layer
expects that there's no request passing through request_queue and no
new one will.

This is fundamentally broken.  The queue owner (e.g. SCSI layer)
doesn't have a way to know whether there are other active users before
calling blk_cleanup_queue() and other users (e.g. bsg) don't have any
guarantee that the queue is and would stay valid while it's holding a
reference.

With delay added in blk_queue_bio() before queue_lock is grabbed, the
following oops can be easily triggered when a device is removed with
in-flight IOs.

 sd 0:0:1:0: [sdb] Stopping disk
 ata1.01: disabled
 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 648, comm: test_rawio Not tainted 3.1.0-rc3-work+ #56 Bochs Bochs
 RIP: 0010:[<ffffffff8137d651>]  [<ffffffff8137d651>] elv_rqhash_find+0x61/0x100
 ...
 Process test_rawio (pid: 648, threadinfo ffff880019efa000, task ffff880019ef8a80)
 ...
 Call Trace:
  [<ffffffff8137d774>] elv_merge+0x84/0xe0
  [<ffffffff81385b54>] blk_queue_bio+0xf4/0x400
  [<ffffffff813838ea>] generic_make_request+0xca/0x100
  [<ffffffff81383994>] submit_bio+0x74/0x100
  [<ffffffff811c53ec>] dio_bio_submit+0xbc/0xc0
  [<ffffffff811c610e>] __blockdev_direct_IO+0x92e/0xb40
  [<ffffffff811c39f7>] blkdev_direct_IO+0x57/0x60
  [<ffffffff8113b1c5>] generic_file_aio_read+0x6d5/0x760
  [<ffffffff8118c1ca>] do_sync_read+0xda/0x120
  [<ffffffff8118ce55>] vfs_read+0xc5/0x180
  [<ffffffff8118cfaa>] sys_pread64+0x9a/0xb0
  [<ffffffff81afaf6b>] system_call_fastpath+0x16/0x1b

This happens because blk_queue_cleanup() destroys the queue and
elevator whether IOs are in progress or not and DEAD tests are
sprinkled in the request processing path without proper
synchronization.

Similar problem exists for blk-throtl.  On queue cleanup, blk-throtl
is shutdown whether it has requests in it or not.  Depending on
timing, it either oopses or throttled bios are lost putting tasks
which are waiting for bio completion into eternal D state.

The way it should work is having the usual clear distinction between
shutdown and release.  Shutdown drains all currently pending requests,
marks the queue dead, and performs partial teardown of the now
unnecessary part of the queue.  Even after shutdown is complete,
reference holders are still allowed to issue requests to the queue
although they will be immmediately failed.  The rest of teardown
happens on release.

This patch makes the following changes to make blk_queue_cleanup()
behave as proper shutdown.

* QUEUE_FLAG_DEAD is now set while holding both q->exit_mutex and
  queue_lock.

* Unsynchronized DEAD check in generic_make_request_checks() removed.
  This couldn't make any meaningful difference as the queue could die
  after the check.

* blk_drain_queue() updated such that it can drain all requests and is
  now called during cleanup.

* blk_throtl updated such that it checks DEAD on grabbing queue_lock,
  drains all throttled bios during cleanup and free td when queue is
  released.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:42:16 +02:00
Jens Axboe 5c04b426f2 Merge branch 'v3.1-rc10' into for-3.2/core
Conflicts:
	block/blk-core.c
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:30:42 +02:00
Hannes Reinecke 777eb1bf15 block: Free queue resources at blk_release_queue()
A kernel crash is observed when a mounted ext3/ext4 filesystem is
physically removed. The problem is that blk_cleanup_queue() frees up
some resources eg by calling elevator_exit(), which are not checked for
in normal operation. So we should rather move these calls to the
destructor function blk_release_queue() as at that point all remaining
references are gone. However, in doing so we have to ensure that any
externally supplied queue_lock is disconnected as the driver might free
up the lock after the call of blk_cleanup_queue(),

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-28 08:07:01 -06:00
Andrew Morton 499337bb65 block/blk-sysfs.c: fix kerneldoc references
The kerneldoc for blk_release_queue() is referring to blk_cleanup_queue().

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:01:22 +02:00
Eric Seppanen e8037d4983 block: Fix queue_flag update when rq_affinity goes from 2 to 1
Commit 5757a6d76c added the QUEUE_FLAG_SAME_FORCE flag, but fails to
clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE)
and the new state is '1' (SAME_COMP).

Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 08:51:34 +02:00