Commit Graph

29 Commits

Author SHA1 Message Date
Hans de Goede 91d96f06a7 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31
The A31 companion pmic (axp221) does not generate vbus change interrupts
when the board is driving vbus, so we must poll when using the pmic for
vbus-det _and_ we're driving vbus.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04 18:07:39 +05:30
Hans de Goede 04e59a0211 phy-sun4i-usb: Fix irq free conditions to match request conditions
commit 5cf700ac9d ("phy: phy-sun4i-usb: Fix optional gpios failing
probe")
changed the condition under which irqs are requested, but omitted matching
changes to sun4i_usb_phy_remove(). This commit fixes this.

Fixes: 5cf700ac9d ("phy: phy-sun4i-usb: Fix optional gpios failing probe")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-22 11:33:46 +05:30
Ben Dooks d99cb37828 phy-sun4i-usb: fix missing __iomem *
Fix the missing __iomem attribute in sun4i_usb_phy_write()
function. This fixes the following sparse warnings:

drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces)
drivers/phy/phy-sun4i-usb.c:178:39:    expected void *phyctl
drivers/phy/phy-sun4i-usb.c:178:39:    got void [noderef] <asn:2>*
drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/phy-sun4i-usb.c:185:17:    expected void volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:185:17:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/phy-sun4i-usb.c:189:24:    expected void const volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:189:24:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/phy-sun4i-usb.c:196:17:    expected void volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:196:17:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/phy-sun4i-usb.c:199:24:    expected void const volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:199:24:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/phy-sun4i-usb.c:205:17:    expected void volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:205:17:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/phy-sun4i-usb.c:208:24:    expected void const volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:208:24:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/phy-sun4i-usb.c:210:17:    expected void volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:210:17:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/phy-sun4i-usb.c:212:24:    expected void const volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:212:24:    got void *phyctl
drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/phy-sun4i-usb.c:214:17:    expected void volatile [noderef] <asn:2>*addr
drivers/phy/phy-sun4i-usb.c:214:17:    got void *phyctl

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17 18:56:00 +05:30
Quentin Schulz 5cf700ac9d phy: phy-sun4i-usb: Fix optional gpios failing probe
The interrupt 0 is not a valid interrupt number. In the event where the
retrieval of the vbus-det gpio would return null, the gpiod_to_irq
callback would return 0, while the current code makes the assumption
that it is a valid interrupt, and would go on calling request_irq.
Obviously, this would fail, preventing the driver from probing properly,
while the vbus and id gpios are optional.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17 18:48:59 +05:30
Reinder de Haan 626a630e00 phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC
Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
not yet (fully) supported after this commit.

Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Hans de Goede 68dbc2ce77 phy-sun4i-usb: Use of_match_node to get model specific config data
Use of_match_node instead of calling of_device_is_compatible a ton of
times to get model specific config data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Axel Lin b2dfc34c97 phy: sun4i-usb: Use devm_gpiod_get_optional for optional GPIOs
Both data->id_det_gpio and data->vbus_det_gpio are optional, so use
devm_gpiod_get_optional for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-06 20:21:47 +05:30
Greg Kroah-Hartman d50f14805e phy: for 4.3
*) Add new NXP USB OTG PHY driver
 *) Add vbus/id detection, extcon support and fixes in phy-sun4i-usb
    driver
 *) Add support to use phy-sun4i-usb driver for sun8i-a23 and sun8i-a33
    SoCs
 *) Other trivial code cleanups, dropping .owner assignment and constify
    phy_ops
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJVyhKbAAoJEA5ceFyATYLZIRcP/ivt04ocgcZ7+kyTC55uUvoA
 I/YAQScDW+LWdCeEE11nWl5oDDecaMDFs/aIVAbuEt38lya6lIzU66gsFlJpJCHj
 LolnyE8DU8WhEkJRdMsDFVLX+oaNPHHfhIGEorm/FwdoJ6oT0TQ1NZbw7qh6o+T9
 +Eb/T8nSTFIHWm24E0MN2pos9mvG4FtDeNp09j05y0F6L/AuLj/eBVJN5vNQ5YgZ
 onA0YuPNzEJOOdgPJp2WiG2U72evCsCXy5X95gBbz/Fk7uj+vvgy+rMNorOZik+H
 jLHGuV5kynHGehjn7+UaiPAU4zFfuqbVSyF07tMVqRdb5nGN9621DcfR9jieb2/g
 3I0BQcHohwTjQvffdifCcDdF6YwzdLtZQwUEqjngafDoi5mfoolLupsTpLO9GOAO
 Dq5ZbvqHKoCdQ1h+LZ6KRrr+de9Lrp3P/Ys/9t22e+DF3Vhq0QW8KNMJtNVutrFx
 RZmiuf5AWPieZBwaVzWVI5AX8Y2KsoVX9BXiOsgkFuFhd3V6lkpI56UlV36IP+rD
 E8MZ1NblCD+zR19DeZByyl2q1jvK3APNsQQrF3YzIGw9/yaJvVsMvpHIlF9gQ3Z1
 A8rvUn3nYW6Gnc9L3b7VQJM15n8K0bym4fPkCIRe5yimC+a5ztxddEajYynmpQGg
 5C9QmBF7MH6HlXwVPF4R
 =97xz
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.3

*) Add new NXP USB OTG PHY driver
*) Add vbus/id detection, extcon support and fixes in phy-sun4i-usb
   driver
*) Add support to use phy-sun4i-usb driver for sun8i-a23 and sun8i-a33
   SoCs
*) Other trivial code cleanups, dropping .owner assignment and constify
   phy_ops

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-14 16:45:51 -07:00
Axel Lin 4a9e5ca1a5 phy: Constify struct phy_ops variables
The phy_ops variables are never modified after initialized in these
drivers, so make them const.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-03 18:35:09 +05:30
Hans de Goede 8083526e05 phy-sun4i-usb: Only check vbus-det on power-on on boards with vbus-det
data->vbus_det is always 1 on boards without a (working) vbus-det, skip
the vbus_det test on such boards.

This fixes the sun4i usb phy code never turning on Vbus on such boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-03 18:35:08 +05:30
Hans de Goede 3d772c4adb phy-sun4i-sub: Move vbus-detect helper functions up in the file
Move vbus-detect helper functions up in the file, just moving some code
around, no functional changes what so ever.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-03 18:35:08 +05:30
Hans de Goede 7167bf8b7f phy-sun4i-usb: Add missing EXPORT_SYMBOL_GPL for sun4i_usb_phy_set_squelch_detect
sun4i_usb_phy_set_squelch_detect is used by other code, which may be built
as a module, so it should be exported.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-01 15:52:58 +05:30
Hans de Goede 8665c18bec phy-sun4i-usb: Add support for monitoring vbus via a power-supply
On some boards there is no vbus_det gpio pin, instead vbus-detection for
otg can be done via the pmic.

This commit adds support for monitoring vbus_det via the power_supply
exported by the pmic, enabling support for otg on these boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede 1aedf3a7a4 phy-sun4i-usb: Add support for boards with broken Vusb-detection
On some boards we cannot detect the presence of an external Vusb, because
e.g. the 5V of the otg connector is directly connected to the 5V of the board,
and thus is always high.

This commit adds support for using such boards by only looking at the
id-detection pin.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede fc1f45ed30 phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC
The usb-phys on the sun8i-a33 SoC are mostly the same as sun8i-a23 but for
some reason (hw bug?) the phyctl register was moved to a different address
and is not initialized to 0 on reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede 123dfdbcfa phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC
The usb-phys on the sun8i-a23 SoC have the same setup wrt clocks as on the
sun6i-a31 SoC, but there are only 2 instead of 3 like on the sun5i-a13 SoC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede 2846469631 phy-sun4i-usb: Swap check for disconnect threshold
Before this commit the code for determining the disconnect threshold was
checking for "allwinner,sun4i-a10-usb-phy" or "allwinner,sun6i-a31-usb-phy"
assuming that those where the exception and then newer SoCs would use a
disconnect threshold of 2 like sun7i does. But it turns out that newer
SoCs use a disconnect threshold of 3 and sun5i and sun7i are the
exceptions, so check for those instead.

Here are the settings from the various Allwinner SDK sources:
 sun4i-a10: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun5i-a13: USBC_Phy_Write(usbc_no, 0x2a, 2, 2);
 sun6i-a31: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun7i-a20: USBC_Phy_Write(usbc_no, 0x2a, 2, 2);
 sun8i-a23: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun8i-h3:  USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun9i-a80: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);

Note this commit makes no functional changes as currently we only support
sun4i - sun7i.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede 1a52abe682 phy-sun4i-usb: Add extcon support for the otg phy (phy0)
The sunxi musb glue needs to know if a host or normal usb cable is plugged
in, add extcon support so that the musb glue can monitor the host status.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede d2332303ef phy-sun4i-usb: Add id and vbus detection support for the otg phy (phy0)
The usb0 phy is connected to an OTG controller, and as such needs some special
handling:

1) It allows explicit control over the pullups, enable these on phy_init and
disable them on phy_exit.

2) It has bits to signal id and vbus detect to the musb-core, add support for
for monitoring id and vbus detect gpio-s for use in dual role mode, and set
these bits to the correct values for operating in host only mode when no
gpios are specified in the devicetree.

While updating the devicetree binding documentation also add documentation
for the sofar undocumented usage of regulators for vbus for all 3 phys.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede 24fe86a617 phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.

The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done. Add a sunxi
specific phy function to allow the sunxi-musb glue to do this.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-27 12:20:36 -05:00
Hans de Goede 372400344a phy-sun4i-usb: Change disconnect threshold value for sun6i
The allwinner SDK uses a value of 3 for the disconnect threshold setting on
sun6i, do the same in the kernel.

In my previous experience with sun5i problems getting the threshold right
is important to avoid usb2 devices being unplugged sometimes going unnoticed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-12-23 15:44:31 +05:30
Heikki Krogerus dbc98635e0 phy: remove the old lookup method
The users of the old method are now converted to the new one.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[ kishon@ti.com : made phy-berlin-usb.c and phy-miphy28lp.c to use the updated
		  devm_phy_create API.]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-22 13:58:39 +05:30
Roman Byshko 6827a46f59 phy: sun4i: add support for USB phy0
The driver for sun4i USB phys currently supports
only phy1 and phy2 which are used for USB host
controllers. This patch adds support for USB phy0,
which is used by the musb hdrc USB controller.

Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-13 11:49:23 +05:30
Peter Griffin 4f0eb5d7ef phy: remove .owner field for drivers using module_platform_driver
This patch removes the superflous .owner field for drivers which
use the module_platform_driver or platform_driver_register api,
as this is overriden in __platform_driver_register.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-24 15:18:34 +05:30
Kishon Vijay Abraham I f0ed817638 phy: core: Let node ptr of PHY point to PHY and not of PHY provider
In case of multi-phy PHY providers, each PHY should be modeled as a sub
node of the PHY provider. Then each PHY will have a different node pointer
(node pointer of sub node) than that of PHY provider. Added this provision
in the PHY core.
Also fixed all drivers to use the updated API.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-07-22 12:46:11 +05:30
Sachin Kamat 2d84aff9c3 phy: sun4i-usb: Use PTR_ERR_OR_ZERO
PTR_ERR_OR_ZERO simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22 12:46:09 +05:30
Maxime Ripard eadd431239 phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
The USB phy controller in the A31 differs mostly from the older controllers
because it has a clock dedicated for each phy, while the older ones were having
a single clock for all the phys.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14 19:41:13 +05:30
Maxime Ripard 2a7f9982d6 phy: sunxi: Rework phy initialization
Move the phy initialization and variables declaration to the loop itself, since
it is where it really belongs. Also remove all the temporary variables, we can
use the structure members directly.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14 19:41:13 +05:30
Hans de Goede ba4bdc9e1d PHY: sunxi: Add driver for sunxi usb phy
The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed
through a single set of registers. Besides this there are also some other
phy related bits which need poking, which are per phy, but shared between the
ohci and ehci controllers, so these are also controlled from this new phy
driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-03 18:50:09 +05:30