Commit Graph

1434 Commits

Author SHA1 Message Date
Linus Torvalds d21572c515 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "A small number of fixes for stuff from the last merge window, and in
  one case (IRQ time accounting) the previous merge window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
  ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
  ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
  ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
  ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
  ARM: finally enable IRQ time accounting config
2013-05-15 13:37:54 -07:00
Olof Johansson 5497e7b896 Merge branch 'late/fixes' into fixes
* late/fixes:
  ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
  ARM: ux500: always select ABX500_CORE
  ARM: SIRF: select SMP_ON_UP only on SMP builds
  ARM: SPEAr: conditionalize l2x0 support
  ARM: imx: build CPU suspend code only when needed
  ARM: OMAP: build SMP code only for OMAP4/5
  ARM: tegra: Tegra114 needs CPU_FREQ_TABLE
  ARM: default machine descriptor for multiplatform

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09 13:05:15 -07:00
Linus Torvalds 5647ac0ad4 Removal of GENERIC_GPIO for v3.10
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
 cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
 possible to do so which has been causing confusion and breakage. This
 branch does the work to completely eliminate GENERIC_GPIO.
 
 However, it is not trivial to just create a branch to remove it. Over
 the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
 added to linux-next that conflicts with this branch. The following must
 be done to resolve the conflicts when merging this branch into mainline:
 
 * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
   replaced with CONFIG_GPIOLIB
 * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
   documentation.
 * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
 * definitions of the option in architecture Kconfig code should be deleted.
 
 Stephen has 3 merge fixup patches[1] that do the above. They are currently
 applicable on mainline as of May 2nd.
 
 [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn
 OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1
 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb
 wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex
 rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m
 ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN
 IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J
 bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq
 rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L
 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd
 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n
 YnCByPwwlvfC4LTXFOGL
 =xodc
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
2013-05-09 09:59:16 -07:00
Linus Torvalds d75e2f9023 Moves xenvm to mach-virt.
Implements SMP support in Xen on ARM.
 Add support for machine reboot and power off via Xen hypercalls.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRe+dxAAoJEIlPj0hw4a6QSMAP/RxMT+TmQopGYLjCT2ZP7K2T
 qMsYzQdSwTc1Yw2ylkjd4Si1MdwtC8oqlmC9pxYXlKUBssX/kApp6tCfZuaWv1gs
 warV1DjgLBxM4ypEGOt/cUYZHs7MRF7XiKyAsalFzlS0lCmoS3n2IEmK+pOBqtIT
 zs3ObNN3jYHdkDfmY7r4+pglZa2SULGDtdUDh4iruS8S8qq28RJdvyGRtjYZa35E
 jUgcC5YVfKYASdDgWQdgVtP/the4JD8aqiJVA3fOvbpc4pHHpReErA3VLnK2UPzE
 pHyZ9J0meK0hBt4KB/s3c49v1RiruJ9aoXixhzzsn3iPerByFG/gT6G9emb7ADhm
 sct9mTpsUxEGwZ2YwnY6TvJAqvPmn2bycZ//rcG0orBYNJrfWk+MwSUrox3Oj/B1
 adWtnNngM/zr/vC/B/NyRiNx71SrESJWCtHSuVoHJ6BxG9S7289CmfeAcOAqqn4d
 Vks1u8kGbQp36K6aSG8PDnp98SOHmDXoClSRtmYQdadci9DDkglvBgqlYhvi/8+z
 wosBfVosbfiC2FyHXIrbDr0c2bXAH1rFVVGv7s4Fr818OM/9v+bJ9g3j3m8zKQXE
 HAu0E5z91Y7/eDM9WFNF9v7r+beFuiXnr2w/WSCEF7mx2qToTR+iAuYGCnJ8D/Eo
 2n9BHrsOIIjUXMelfckq
 =U5Oc
 -----END PGP SIGNATURE-----

Merge tag '3.9-rc3-smp-6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen

Pull ARM Xen SMP updates from Stefano Stabellini:
 "This contains a bunch of Xen/ARM specific changes, including some
  fixes, SMP support for Xen on ARM, and moving the xenvm machine from
  mach-vexpress to mach-virt.

  The non-Xen files that are touched are arch/arm/Kconfig, to select
  ARM_PSCI on XEN, and arch/arm/boot/dts/Makefile, to build the xenvm
  DTB if CONFIG_ARCH_VIRT.

  Highlights:

   - Move xenvm to mach-virt.

   - Implement SMP support in Xen on ARM.

   - Add support for machine reboot and power off via Xen hypercalls"

* tag '3.9-rc3-smp-6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
  xen/arm: remove duplicated include from enlighten.c
  xen/arm: use sched_op hypercalls for machine reboot and power off
  xenvm: add a simple PSCI node and a second cpu
  xen/arm: XEN selects ARM_PSCI
  xen: move the xenvm machine to mach-virt
  xen/arm: SMP support
  xen/arm: implement HYPERVISOR_vcpu_op
  xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq
2013-05-07 15:11:43 -07:00
Linus Torvalds 1bf25e78af ARM: arm-soc: late cleanups
These are cleanups and smaller changes that either depend on earlier
 feature branches or came in late during the development cycle.
 We normally try to get all cleanups early, so these are the exceptions:
 
 - A follow-up on the clocksource reworks, hopefully the last time
   we need to merge clocksource subsystem changes through arm-soc.
   A first set of patches was part of the original 3.10 arm-soc cleanup
   series because of interdependencies with timer drivers now moved out
   of arch/arm.
 
 - Migrating the SPEAr13xx platform away from using auxdata for DMA
   channel descriptions towards using information in device tree,
   based on the earlier SPEAr multiplatform series
 
 - A few follow-ups on the Atmel SAMA5 support and other changes
   for Atmel at91 based on the larger at91 reworks.
 
 - Moving the armada irqchip implementation to drivers/irqchip
 
 - Several OMAP cleanups following up on the larger series already
   merged in 3.10.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYj5U2CrR//JCVInAQLNIRAAvsCtYOmXTxkRBxdtNEUUbkEjx71Se7q0
 h9PR8vqlkbYwONkJ8a6j8pKq/WJDmLpHQWg/moBsvlGc6uEVBPBFhCWHs1+yGUzX
 GhnJOaIKh3+651hIoXccS+/YZ16e1EAzdCM7+1QegPTldsRGkTOiwXgmR51kmPrz
 6cZ8P5MFqMrWIy4XqWhOBbMDCY/An05IHMpniGIamUg2/uB921Z0wNFvDrnsg97u
 DsVEwimyCJ0j7aO4TH+fkvsjoGWnIhxPtpaIm8iff6TPRI49deRb3zYpnIONm+oG
 /cQrRf3BNW+aiTuRCTEjdBNGtcrYgN6CLWWjzgMhv1itSlX8swBcOhuNJRCGNQRI
 v3wL4aEBxUpPGGL8erc2GIW7pe29YC2UEYI2z1X/5MEzYO589zkkG2k+/3HQVUwp
 dnYpQxhjRMvh4mcodBJFRjzH1Z7agKUwtoKalAHRRH7r5gJDkpL3zLoMhYPTG5IZ
 OwU+aYf+dDxh2kKW0zs8a/qL97UTHjlTRUC9LPoumvJ7LlKeDfzEn7DHUm2gggiu
 dO9ye/NF/xEXoDXTl0Qp2wJ6/sbPSLyCYCIMdP/gJjWUiDDqqZ0VRaKL7vE/JWrd
 NJ7k5yunX8/kRgfqgRFLDdFnPj1JeYHlmexsq4l9TPbPstoIcbw8u1v9sr8aZF+Z
 agh9u4e7QU8=
 =HWfp
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These are cleanups and smaller changes that either depend on earlier
  feature branches or came in late during the development cycle.  We
  normally try to get all cleanups early, so these are the exceptions:

   - A follow-up on the clocksource reworks, hopefully the last time we
     need to merge clocksource subsystem changes through arm-soc.

     A first set of patches was part of the original 3.10 arm-soc
     cleanup series because of interdependencies with timer drivers now
     moved out of arch/arm.

   - Migrating the SPEAr13xx platform away from using auxdata for DMA
     channel descriptions towards using information in device tree,
     based on the earlier SPEAr multiplatform series

   - A few follow-ups on the Atmel SAMA5 support and other changes for
     Atmel at91 based on the larger at91 reworks.

   - Moving the armada irqchip implementation to drivers/irqchip

   - Several OMAP cleanups following up on the larger series already
     merged in 3.10."

* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: OMAP4: change the device names in usb_bind_phy
  ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
  ARM: SPEAr: conditionalize SMP code
  ARM: arch_timer: Silence debug preempt warnings
  ARM: OMAP: remove unused variable
  serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
  ata: arasan: remove the need for platform_data
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
  ARM: at91: suspend both memory controllers on at91sam9263
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ...
2013-05-07 11:22:14 -07:00
Linus Torvalds fcba914542 ARM: arm-soc platform updates for 3.10, part 3
This is the third and smallest of the SoC specific updates.
 Changes include:
 
 * SMP support for the Xilinx zynq platform
 * Smaller imx changes
 * LPAE support for mvebu
 * Moving the orion5x, kirkwood, dove and mvebu platforms
   to a common "mbus" driver for their internal devices.
 
 It would be good to get feedback on the location of the "mbus"
 driver. Since this is used on multiple platforms may potentially
 get shared with other architectures (powerpc and arm64), it
 was moved to drivers/bus/. We expect other similar drivers to
 get moved to the same place in order to avoid creating more
 top-level directories under drivers/ or cluttering up the
 messy drivers/misc/ even more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgifmCrR//JCVInAQLZ6A//VD38ocUx9RPC8rOgrkzQxcMTh3wFghoA
 BVvS8fcAmhZYA5+GpTYBm+5XH2Jvu6Pv0hrba8TOeEhyZJxiWA6vg0cWWmnvZLDC
 Q0uubhqIhv32I2Oq4uJb/VyzcCrQFrnjhw9HHphy7YlGKKBUFWrbgTaOypwbgXr9
 DnB7u04DvaKcUjZb4Y0HaUDM7qWMFDPbKKF5WMZPqjocnjsiBQ2JMw+2KByliWR3
 mCI+FdickpDYSVp9V9iRM6F73cItknjZIzQs1RYg/GSuPSWkWTdfzE1Blk/561Fo
 QDrNDhnXHlt+bmQRKGWel2gDWBZW47Wj+XkjGpWDFh+e/l3vNJq0hrzXizuRCLSw
 /2VefXyd3jNj8UWL3+GCA4dnw8fx14dgfNJ2iu7kg6l4ggwpJ05ToxabkLFlTRwy
 LloDFjswiTBi75YdQRQCV/95NIxvIQIkbytPrk5zQWVwg8ZXoicgzRRUL5gifLh+
 WE+zaY/A5e1fXN/XS70hvbp2ROZtfGOdunUR9XFR8KNqDoJDlqtrlV3Pjh75YY8G
 JUmCKQjzfubr5WHskPBGCtsSb1455MEIFVANEtlJyOEKp6ytXfpVvrrZtAvmD6Ep
 07dOqOgflnuZPk7H0JOf7mTf9L+fmNp4ubjRqcs9ZfPsEGoQFqBtpLF6JQbxUYGd
 j69lW3jEM3o=
 =rQsu
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
 "This is the third and smallest of the SoC specific updates.  Changes
  include:

   - SMP support for the Xilinx zynq platform
   - Smaller imx changes
   - LPAE support for mvebu
   - Moving the orion5x, kirkwood, dove and mvebu platforms to a common
     "mbus" driver for their internal devices.

  It would be good to get feedback on the location of the "mbus" driver.
  Since this is used on multiple platforms may potentially get shared
  with other architectures (powerpc and arm64), it was moved to
  drivers/bus/.  We expect other similar drivers to get moved to the
  same place in order to avoid creating more top-level directories under
  drivers/ or cluttering up the messy drivers/misc/ even more."

* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: imx: reset_controller may be disabled
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ...
2013-05-07 11:02:18 -07:00
Linus Torvalds a8c4b90e67 ARM: arm-soc platform updates for 3.10, part 2
These patches are all for Renesas shmobile, and depend on the earlier
 pinctrl updates. Remarkably, this adds support for three new SoCs:
 r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is
 for pinctrl (using the new subsystem) and for clocks (not yet using the
 common clock subsystem). The latter will have to get converted in one
 of the upcoming releases, but shmobile is not ready for that yet.
 
 The series also contains Renesas shmobile board changes, adding one
 board file for each of the three new SoCs.  These boards are using a
 mix of classic and device-tree based probing, as there is still a lot of
 infrastructure in shmobile that has not been converted to DT yet. Once
 those are resolved to the degree that no board specific setup code is
 needed, they can get folded into the respective SoC setup files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYghoGCrR//JCVInAQIS0hAAoTaH/IgTmKMsKuP1fS/zhsXNSioO77GR
 5KnEigaprC7JJK4k+Ahl6xVY/6/RmjWA3aLJ6eqBHHsupE1c5AOgDxIB78PtY8gn
 vS+oKPqUlYi9bMJRp6LDsr23filt1Ri6woVYnW7htFsfXZIqxf+x6OlMKGULC4Zv
 469rx/mgUB7IH/uwp8Jasr7xtE4hnjtgoUIqAKRmE10dLUTAuCN5+SABhlKMZIbl
 W5VimdiDK6pNm2ENPcJQhTCMK1pFuChgrzpqOGSxsAiYIQgshuAuJJLb0RvEMppu
 zuDQIxjfmJrwzytyGpxC4c9YVhNajppnWuenpAyaqaPuAi5sGkNFzdJ5NNWokZZ7
 g6PfKLr9SAnuvfpTTX/JVuVYHysj18wEGVlLklLFDX8l9Bt6RZ17DARZ+4P8RLgN
 0NI5j/IWwCesrsbS000NT7vi+mK/cWW22Z7oXa8aIQYPDod2aV5SxImmfXWx0xvf
 vDOkzeNxJb5Tpp6WN1A715ZYdWfEuCJT3D6jX5Gsv6Ggri0+zwbsm/NglCCcqe0X
 slO/74Kn9nknK85p5rm51KIaHvP4POPR/pZP9mQvDDKIqs3qQSjhBgozk0gWbara
 Wg6k2yeRPxmdj+tsGQMxmT2iLWCWx/uhAilW83oOUiFtTPnC6HkBF5AdXXI08Yt8
 /d19O715i/g=
 =xaLf
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 2) from Arnd Bergmann:
 "These patches are all for Renesas shmobile, and depend on the earlier
  pinctrl updates.  Remarkably, this adds support for three new SoCs:
  r8a73a4, r8a73a4 and r8a7778.  The bulk of the code added for these is
  for pinctrl (using the new subsystem) and for clocks (not yet using
  the common clock subsystem).  The latter will have to get converted in
  one of the upcoming releases, but shmobile is not ready for that yet.

  The series also contains Renesas shmobile board changes, adding one
  board file for each of the three new SoCs.  These boards are using a
  mix of classic and device-tree based probing, as there is still a lot
  of infrastructure in shmobile that has not been converted to DT yet.
  Once those are resolved to the degree that no board specific setup
  code is needed, they can get folded into the respective SoC setup files."

* tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: shmobile: use r8a7790 timer setup code on Lager
  ARM: shmobile: force enable of r8a7790 arch timer
  ARM: shmobile: Add second I/O range for r8a7790 PFC
  ARM: shmobile: bockw: enable network settings on bootargs
  ARM: shmobile: bockw: add SMSC ethernet support
  ARM: shmobile: R8A7778: add Ether support
  ARM: shmobile: bockw: enable SMSC ethernet on defconfig
  ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
  ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
  ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
  ARM: shmobile: mackerel: add interrupt names for SDHI0
  ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
  ARM: shmobile: mackerel: remove OCR masks, where regulators are used
  ARM: shmobile: mackerel: SDHI resources do not have to be numbered
  ARM: shmobile: Initial r8a7790 Lager board support
  ARM: shmobile: APE6EVM LAN9220 support
  ARM: shmobile: APE6EVM PFC support
  ARM: shmobile: APE6EVM base support
  ARM: shmobile: kzm9g-reference: add ethernet support
  ARM: shmobile: add R-Car M1A Bock-W platform support
  ...
2013-05-07 10:57:51 -07:00
Sebastian Hesselbarth 756b253167 ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
The CPU used in Marvell Dove SoCs is a PJ4 Sheeva core. Using
CONFIG_CPU_PJ4 instead of CONFIG_CPU_V7 will enable iWMMXt
extensions on Dove.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-07 10:34:29 +01:00
Arnd Bergmann 442a33ebce Merge branch 'late/clksrc' into late/cleanup
There is no reason to keep the clksrc cleanups separate from the
other cleanups, and this resolves some merge conflicts.

Conflicts:
	arch/arm/mach-spear/spear13xx.c
	drivers/irqchip/Makefile
2013-05-06 23:43:45 +02:00
Linus Torvalds 6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00
Russell King 87c46b6c3d ARM: finally enable IRQ time accounting config
We've had IRQ time accounting for the last six months, except for the
Kconfig symbol.  This somehow got missed out of the original patch.
Add this now.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-04 14:38:59 +01:00
Linus Torvalds 8546dc1d4b Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "The major items included in here are:

   - MCPM, multi-cluster power management, part of the infrastructure
     required for ARMs big.LITTLE support.

   - A rework of the ARM KVM code to allow re-use by ARM64.

   - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes
     of that stuff for arch/arm

   - Preparatory patches for Cortex-M3 support from Uwe Kleine-König.

  There is also a set of three patches in here from Hugh/Catalin to
  address freeing of inappropriate page tables on LPAE.  You already
  have these from akpm, but they were already part of my tree at the
  time he sent them, so unfortunately they'll end up with duplicate
  commits"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE()
  ARM: IMX: remove unnecessary use of IS_ERR_VALUE()
  ARM: OMAP: use consistent error checking
  ARM: cleanup: OMAP hwmod error checking
  ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
  ARM: 7700/2: Make cpu_init() notrace
  ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE
  ARM: 7701/1: mm: Allow arch code to control the user page table ceiling
  ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum()
  ARM: mcpm: provide an interface to set the SMP ops at run time
  ARM: mcpm: generic SMP secondary bringup and hotplug support
  ARM: mcpm_head.S: vlock-based first man election
  ARM: mcpm: Add baremetal voting mutexes
  ARM: mcpm: introduce helpers for platform coherency exit/setup
  ARM: mcpm: introduce the CPU/cluster power API
  ARM: multi-cluster PM: secondary kernel entry code
  ARM: cacheflush: add synchronization helpers for mixed cache state accesses
  ARM: cpu hotplug: remove majority of cache flushing from platforms
  ARM: smp: flush L1 cache in cpu_die()
  ARM: tegra: remove tegra specific cpu_disable()
  ...
2013-05-03 09:13:19 -07:00
Russell King 946342d03e Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and 'smp-hotplug' into for-linus 2013-05-02 21:30:36 +01:00
Linus Torvalds 99c6bcf46d ARM: arm-soc multiplatform updates for 3.10
More multiplatform enablement for ARM platforms. The ones converted in
 this branch are:
 - bcm2835
 - cns3xxx
 - sirf
 - nomadik
 - msx
 - spear
 - tegra
 - ux500
 
 We're getting close to having most of them converted!
 
 One of the larger platforms remaining is Samsung Exynos, and there are
 a bunch of supporting patches in this merge window for it. There was a
 patch in this branch to a early version of multiplatform conversion,
 but it ended up being reverted due to need of more bake time. The
 revert commit is part of the branch since it would have required
 rebasing multiple dependent branches and they were stable by then.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgg99AAoJEIwa5zzehBx3n78P/j0w/8v+F4dM29ba5M/tqbFI
 e3wpeFykZ/HJH+FFIEYfIablpfHsLB0LEMh0dZmwHESFC6eR0RfGL2jOkpfcH9Ne
 7B/JIFN4l1iwqqKCXf+QbYL6e8YFxlJkg6BIB4KhNgliQoO/ASP/8EbcgROYuxmN
 KPVdw9laUCCvb5Ogh2NWVAkBHhVGAEiqK20r4TQz8alI8RUmMleWM3o+wLBWVhOO
 d3gtYSfuFSbrJfbpKSdycLizoV/NekdOC1A9Ov9YuOdw8DzNbrThCRQtu0tIUgxN
 JjfnGlEJLsJS9SESfr8SYWxTuhe/lB2dGqjQPvRtl2HGBhbtTlnWfQ0k2ZHdeJuD
 J50SLrGA2gN9E5PlHJXjYk8uhhGIq8bNTJ//CtDkfKTq1D7PuHVEpEctsaz3BBbM
 U+x9zP2v4FB+yrZu8w+gkQY/wDgHsxj08mT6BK0+l8ePdyQV22CvwmM5XlJFI03x
 5J0nLYiYfef+ZN9rGgVrQbn+yv+IEkE4DmeiscjeVJE5LVdVrDpYGfx7UA7V0UA7
 i3KRVpNKuy1v7GJDnKlEBPkmB+vgXTRXUPDVCuC4n0Hi5PYj4es1gY6AoXGF90wm
 vtKxGr/2XDLP7Ro+m0OXMttSgQShnmbrbOngfkWcFwUmG7cB3SSUUOGKM+2LNnXM
 MJTqVhPjkZ2GYBi/J6S/
 =4hSo
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  ...
2013-05-02 09:38:16 -07:00
Linus Torvalds 97b1007a29 ARM: arm-soc platform updates for 3.10, part 1
This branch contains platform updates for 3.10. Among the highlights:
 
 - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
 - New support for CSR SiRFatlas6 SoCs
 - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
 - A bunch of updates for the shmobile platforms
 - A handful of updates for davinci
 - A few updates for Qualcomm MSM
 - Plus a handful of other patches, defconfig updates, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgg+LAAoJEIwa5zzehBx3ePcP/3NUsSOTRQ2SZIVpyjnWOhkf
 RMZiRaVsxrY0BPfDB9E2Vcb6lannKmACTujs/Ux7kJC22BreuFM1PnZoDfhkRuSE
 n/nVB1981XJS82z2uONRSZGlUPSGWYzhTTUDJ0nHiBGmIGf5ctnC0iYWp3As3lv9
 kNY14H7NkwQ4zBVNEMu7WfW8d2IJgqZJgR9xhZPv5fOZ+LlQmK6VaHWTmQtjyea1
 bG1qoJ0dPbfJB4Vnr3a49rBkSJxZUiv8xQucw9+vo+ADRi64M4sZ1Jj2vVyDpqZp
 F4fxBNMVvg7xM0TcBbItFFYJBXlUjeT4z+UI5iYjkbnE7EV9ndFeZXHCWX1qzOSy
 X/nrJKuoe7ISQanBE9SHS9DpDGlkPDO0Mn0vb1f2VUQOY513pt/D1iFYEucZ6WCN
 fWUYtvt5GayidUr55D1U8ssbE0oGt2rizd9x7GUk4KbRVAnUUNopIQAhXrefTrZm
 jfdZNDckJ2F3aq8IPjsKuyJTpe61xD4Wvb3P/pEE3Q8fowPF5WIxXV+qjqHQ9vtt
 Tz4LkP/YdynVFGmhOwz3QZmPaQItaabaYyCcZ5cVCvt5mdxx5VuHYppafhCPJz+V
 KCQpKi1azuIv+sDR+nlGOl6+Ideea3s7TsRudfbmQFp5GsqkqOdJzR9gbbKmJauQ
 4JPpRd+4W8wC8zXQnhVY
 =HXX3
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "This branch contains part 1 of the platform updates for 3.10.  Among
  the highlights:

   - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
   - New support for CSR SiRFatlas6 SoCs
   - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
   - A bunch of updates for the shmobile platforms
   - A handful of updates for davinci
   - A few updates for Qualcomm MSM
   - Plus a handful of other patches, defconfig updates, etc."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
  ARM: tegra: pm: fix build error w/o PM_SLEEP
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support
  ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
  ARM: socfpga: Add clock entries into device tree
  ARM: socfpga: Enable soft reset
  ARM: EXYNOS: replace cpumask by the corresponding macro
  ARM: EXYNOS: handle properly the return values
  ARM: EXYNOS: factor out the idle states
  ARM: OMAP4: Enable fix for Cortex-A9 erratas
  ARM: OMAP2+: Export SoC information to userspace
  ARM: OMAP2+: SoC name and revision unification
  ARM: OMAP2+: Move common part of late init into common function
  ARM: tegra: pm: remove duplicated include from pm.c
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: SAMSUNG: check processor type before cache restoration in resume
  ...
2013-05-02 09:31:45 -07:00
Linus Torvalds a7726350e0 ARM: arm-soc cleanup for 3.10
Here is a collection of cleanup patches. Among the pieces that stand out are:
 
 - The deletion of h720x platforms
 - Split of at91 non-dt platforms to their own Kconfig file to keep them separate
 - General cleanups and refactoring of i.MX and MXS platforms
 - Some restructuring of clock tables for OMAP
 - Convertion of PMC driver for Tegra to dt-only
 - Some renames of sunxi -> sun4i (Allwinner A10)
 - ... plus a bunch of other stuff that I haven't mentioned
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggUqAAoJEIwa5zzehBx3HjEQAJwp7heRs/HwTDzmzcyHkRMV
 usbaa9dHBuAZ0DzsWjLK99xEn8VWD9TvbeP6hN5gNhxko06UVza3o8PI2iV1ztMB
 9K3u2+LS5on/5cOxnsU1va16h5hBZ0ZIgNx5NY+PZ5mBY6v1U3qTjljPP62iXp63
 w+sdXeZDe/c5JvuoDRbY0OBR++3Jp8cQg7KbU78jWz3r5D2rC1zwhkf2audcRY6b
 jIWTj9M8CHynh/D6OzKqDcOYorBHNSRj0YbiWS2nnMfm+0V8nya00EPRpCPRiBUb
 sobSy1CI9Qxiih3bOf6QCfzCRzJ5hbtE0zlI8g3bqtEZ1yOsE949HrKapWHJJdIU
 JNTXrxXORAnaRhbzvSPNpp/iJBSDQRsfEETgv5BuHg/4lzTQfzElySbcgb4EeoHr
 7Zt8ZR2/Du+u76qIPqs19ES3Wx+nOEOfSDAgZmlfPvlwmlGDYvqAXoeJ006VXnhG
 JacLuD/cFnJ1w00Bcl48ZXMIsVkoRqjvsCG5q688HGXMM1lU8DfgUpQY6OCWAbdu
 kFnBinJZk+HbE8FGS8O0BoQ+oiC0YIr2XhATL66PGHq7bLHb5ycwvZ7mrfC0AN9j
 M9hqTFednwfo9wF8vSj5nMsxXwP8/mky4ECGoFvLsMYDosunrNVnAHtTgDSE+ZgO
 6kQJ1P8jBBXn2LyjF88W
 =xCAx
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup from Olof Johansson:
 "Here is a collection of cleanup patches.  Among the pieces that stand
  out are:

   - The deletion of h720x platforms
   - Split of at91 non-dt platforms to their own Kconfig file to keep
     them separate
   - General cleanups and refactoring of i.MX and MXS platforms
   - Some restructuring of clock tables for OMAP
   - Convertion of PMC driver for Tegra to dt-only
   - Some renames of sunxi -> sun4i (Allwinner A10)
   - ... plus a bunch of other stuff that I haven't mentioned"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: sunxi: Rework the restart code
  irqchip: sunxi: Rename sunxi to sun4i
  irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
  clocksource: sunxi: Rename sunxi to sun4i
  clocksource: sunxi: make use of CLKSRC_OF
  clocksource: sunxi: Cleanup the timer code
  ARM: at91: remove trailing semicolon from macros
  ARM: at91/setup: fix trivial typos
  ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
  ARM: EXYNOS: change the name of USB ohci header
  ARM: SAMSUNG: Remove unnecessary code for dma
  ARM: S3C24XX: Remove unused GPIO drive strength register definitions
  ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
  ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
  ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
  ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
  ...
2013-05-02 09:03:55 -07:00
Linus Torvalds 3ed1c478ef Power management and ACPI updates for 3.10-rc1
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
 
 - exynos5440 cpufreq driver from Amit Daniel Kachhap.
 
 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.
 
 - cpufreq scalability improvement from Nathan Zimmer.
 
 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.
 
 - cpuidle code consolidation and cleanups from Daniel Lezcano.
 
 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
 
 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim,
   Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
 
 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J. Wysocki.
 
 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements
   from Rafael J. Wysocki and Andy Shevchenko.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf8M8AAoJEKhOf7ml8uNsud4P/3cabXP5lDipzibRrpOiONse
 puuvIdhtNdMRMc3t1oSDjNH/w/JA51Gc+ICGFAORiyVmqxBc85mpT6J5ibqV7hNd
 pCqbKJceoB5PajHZSx22e4wG9O7YN1k3r80p38IfFzA+Ct0KNSuE0ixMEfHKYjiq
 p5pXswk6TY3gtBReH9agrafHqDtXw4IMTE0asMuJ+BorPW7vQeiNlrkuA+0qmDuu
 26O0Pm2TVkx1ryfTjdM9zSZ9X2G4JuM8rm1/VFZWQJTExwlv3bA2Za1nvQNJlJ99
 6JZ0JXfAehcEW2Ye0sqsZ8HSEabDVHM29QvvOszJ5RpBXERiOCHOkhvFleCoTpn0
 Xq0rtXPrLMH1G28Ej+cxmsAjfzOLV2Byg30CAoI/GCLuQ+xh+VMCpuNYQuld25CG
 9rtYd0fWESeYsAebhDcX0E3xyzJtbrHtOb9PyGwNkbAJ8YQfhVSMCOPi2SX2wa+Q
 qXLXi2VaHvjBSUKcAv5BmM+Ya57Be+88D0LxbgXbUeOnYefUK1ljldKDDshkMjgG
 P4LPdm4JpoB5ncXSOO1Dz9w9QnNcFexSUySd/TtKLNMha1vEHV8ISzNPYY+9IdXf
 XN0VZbFnUDzdj+Fwna7zyFb1cGihDYJKAtpXvRd8Y6RGUxKx9uGLAFJZw/xZB/cR
 KZKuML5O8MgJuef37F38
 =H/se
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...
2013-04-30 15:21:02 -07:00
Linus Torvalds 8700c95adb Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...
2013-04-30 07:50:17 -07:00
Arnd Bergmann 883a106b08 ARM: default machine descriptor for multiplatform
Since we now have default implementations for init_time and init_irq,
the init_machine callback is the only one that is not yet optional,
but since simple DT based platforms all have the same
of_platform_populate function call in there, we can consolidate them
as well, and then actually boot with a completely empty machine_desc.
Unofortunately we cannot just default to an empty init_machine: We
cannot call of_platform_populate before init_machine because that
does not work in case of auxdata, and we cannot call it after
init_machine either because the machine might need to run code
after adding the devices.

To take the final step, this adds support for booting without defining
any machine_desc whatsoever.

For the case that CONFIG_MULTIPLATFORM is enabled, it adds a
global machine descriptor that never matches any machine but is
used as a fallback if nothing else matches. We assume that without
CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel
is built for, so we still retain the build-time warning for missing
machine descriptors and the run-time warning when the platform does not
match in that case.

In the case that we run on a multiplatform kernel and the machine
provides a fully populated device tree, we attempt to keep booting,
hoping that no machine specific callbacks are necessary.

Finally, this also removes the misguided "select ARCH_VEXPRESS" that
was only added to avoid a build error for allnoconfig kernels.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk>
Cc: Rob Herring <robherring2@gmail.com>
2013-04-29 21:56:57 +02:00
Olof Johansson afcf7924ec Merge branch 'fixes' into next/cleanup
Merging in fixes since there's a conflict in the omap4 clock tables caused by
it.

* fixes: (245 commits)
  ARM: highbank: fix cache flush ordering for cpu hotplug
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
  ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
  ARM i.MX6: Fix ldb_di clock selection
  ARM: imx: provide twd clock lookup from device tree
  ARM: imx35 Bugfix admux clock
  ARM: clk-imx35: Bugfix iomux clock
  + Linux 3.9-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-omap2/cclock44xx_data.c
2013-04-28 15:01:12 -07:00
Rafael J. Wysocki 885f925eef Merge branch 'pm-cpufreq'
* pm-cpufreq: (57 commits)
  cpufreq: MAINTAINERS: Add co-maintainer
  cpufreq: pxa2xx: initialize variables
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  cpufreq: cpu0: Put cpu parent node after using it
  cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
  cpufreq: ARM big LITTLE: put DT nodes after using them
  cpufreq: Don't call __cpufreq_governor() for drivers without target()
  cpufreq: exynos5440: Protect OPP search calls with RCU lock
  cpufreq: dbx500: Round to closest available freq
  cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
  cpufreq / intel_pstate: Optimize intel_pstate_set_policy
  cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  arm: exynos: Enable OPP library support for exynos5440
  cpufreq: exynos: Remove error return even if no soc is found
  cpufreq: exynos: Add cpufreq driver for exynos5440
  cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
  cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
  cpufreq: convert cpufreq_driver to using RCU
  cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
  cpufreq: sparc: move cpufreq driver to drivers/cpufreq
  ...

Conflicts:
	MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
	drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
2013-04-28 02:10:46 +02:00
Olof Johansson 340fcb5cb4 Merge branch 'samsung/exynos-multiplatform' into next/drivers
This merges in the revert of multiplatform support for exynos.

Trivial conflicts on removed code. Also, needed to add "select COMMON_CLK"
to the non-multiplatform EXYNOS config option.

* samsung/exynos-multiplatform:
  Revert "ARM: exynos: enable multiplatform support"

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26 11:47:45 -07:00
Olof Johansson 772ba2ffd2 Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
This just merges in the revert of multiplatform support. Not doing it by
cherry-pick since we need the same revert in the next/drivers branch.

* samsung/exynos-multiplatform:
  Revert "ARM: exynos: enable multiplatform support"

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26 11:35:59 -07:00
Olof Johansson 4923ee444a Revert "ARM: exynos: enable multiplatform support"
This reverts commit bd51de53e1.

Turns out that multiplatform breaks some uses cases, such as when you
have an existing defconfig, since it adds the new EXYNOS_SINGLE config
option as a dependecy. As a result, nearly all exynos config options
will be disabled by default.

Reverting instead of rebasing since this branch is pulled in as a
dependency elsewhere.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26 11:35:51 -07:00
Stefano Stabellini 17b7ab80e3 xen/arm: XEN selects ARM_PSCI
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-04-25 16:46:08 +00:00
Russell King a126f7c41d Merge branch 'mcpm' of git://git.linaro.org/people/nico/linux into devel-stable 2013-04-25 09:42:42 +01:00
Nicolas Pitre e8db288e05 ARM: multi-cluster PM: secondary kernel entry code
CPUs in cluster based systems, such as big.LITTLE, have special needs
when entering the kernel due to a hotplug event, or when resuming from
a deep sleep mode.

This is vectorized so multiple CPUs can enter the kernel in parallel
without serialization.

The mcpm prefix stands for "multi cluster power management", however
this is usable on single cluster systems as well.  Only the basic
structure is introduced here.  This will be extended with later patches.

In order not to complexify things more than they currently have to,
the planned work to make runtime adjusted MPIDR based indexing and
dynamic memory allocation for cluster states is postponed to a later
cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions
should be sufficient for those systems expected to be available in the
near future.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:36:59 -04:00
Arnd Bergmann 1b361942b5 Merge branch 'spear/multiplatform' into late/cleanup
This is a prerequisite for the spear/dwdma series.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 22:50:01 +02:00
Arnd Bergmann dc9c220304 Merge branch 'next/spring-cleaning' into next/cleanup 2013-04-19 17:18:46 +02:00
Arnd Bergmann 0dc488e778 Merge branch 'samsung/exynos-multiplatform' into next/drivers
Merging this into the next/drivers branch avoids a number of
pointless conflicts with code changed here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 16:50:56 +02:00
Arnd Bergmann 56b690481c Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches.  This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.

A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to

* The ASoC conversion to dmaengine won't make it unless someone
  who knows that code better steps up to do it right away. This
  means that we won't have audio in a 3.10 multiplatform kernel
  on Exynos, but it will still work for users that don't enable
  multiplatform.

* The irqchip (combiner), clk and clksource patches are all based
  on top   of other changesets we pulled in from your trees, so I
  would not make them part of the next/multiplatform branch. We can
  apply them on top of the next/drivers branch once they are
  tested successfully.

* A trivial patch is needed in the end to actually make
  CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
  We will do that as a separate patch once everything else is
  there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 14:33:09 +02:00
Arnd Bergmann bd51de53e1 ARM: exynos: enable multiplatform support
This makes it possible to enable the exynos platform as part of a
multiplatform kernel, in addition to keeping the single-platform
exynos support.

The multiplatform variant has a number of limitations at the moment:

* It only supports DT-enabled machines. This is not a problem in
  the long run, as non-DT machines for exynos are going away.
  The main problem here is that the gpio code and the exynos_eint
  irqchip are not multiplatform capable but still required for
  ATAGS based boot.
* The watchdog driver is still missing a conversion.
* sparsemem and memory_holes are currently not supported in
  multiplatform.

The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled
for now, as dependent patches are still pending in other
subsystem trees. We will enable it once everything comes together.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 13:51:26 +02:00
Olof Johansson 8b85143e5d mvebu soc changes for v3.10
- use the mvebu-mbus driver
  - prep for LPAE support
 
 Depends:
  - mvebu/cleanup (tags/cleanup_for_v3.10)
  - mvebu/drivers (tags/drivers_for_v3.10)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRbApqAAoJEAi3KVZQDZAeiUkH+gI3KNnIEmwbMANGy+zdX70Y
 mVj5X51MkXCawqNPLT6KYTO16Ap8STBXDxLfQfll1BuIeATgQgqs8dCcykiYQ4me
 45Hj9+6uZhfPpN43u4syFPoYaLSAMT9Oe/9ntcpdnyu4fEsRmGGh2Dg8bhYcG1B2
 +IVB67qSJ3vU0D2bcqsbSPuSu9MW2Qloc5+SMR74TcsyseZw10kbvL6cdwi9DpNt
 ru2c/bXqO88U1pmeedJ8Cxl0KGFDhocYWV6orqph+2jIxuCDYd7DjOXFKeMHwcDX
 lj54wMUyp8EzTs+huhnK3qL6waXTyccmMDDvgIL6WiFywvklTOJOFz0BnfHIHpk=
 =RK7u
 -----END PGP SIGNATURE-----

Merge tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux into next/soc2

From Jason Cooper:
mvebu soc changes for v3.10

 - use the mvebu-mbus driver
 - prep for LPAE support

Depends:
 - mvebu/cleanup (tags/cleanup_for_v3.10)
 - mvebu/drivers (tags/drivers_for_v3.10)

* tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux:
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood
  bus: mvebu-mbus: Restore checking for coherency fabric hardware
  ARM: Orion: add dbg_show function to gpio-orion driver
  bus: introduce an Marvell EBU MBus driver
  arm: mach-orion5x: use mv_mbus_dram_info() in PCI code
  arm: plat-orion: use mv_mbus_dram_info() in PCIe code
  arm: plat-orion: only build addr-map.c when needed

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-17 22:26:25 -07:00
Olof Johansson c3e0c873d0 This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:
 
 - Add sched_clock selection logic to select the highest frequency clock
 - Use full 64-bit arch timer counter for sched_clock
 - Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
 adapt all users to use clocksource_of_init
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZx0aAAoJEMhvYp4jgsXiB7MH/AutBUa40yuzTA1RzaDxYTX7
 m1NrjmsTI8pFLX6VTvtwNXdT1AJ0JbzPxu35E1Y8xsu8tnx/RjG/hhqq8R2rXd5t
 oqilT46SPBZpKBSrPSuEQde5v8XlKT5kEcUlg47bHGB1JrI9Ip14okRcg5aCJJzu
 Pb25NqxTWS+vFTNV7C+UzuJ72lJ24FHQXK4AbZqaWcaokGCRLP1QE1s83jY7mpX7
 zd5xWMPygKR8oYNPVhxoD1ajUo5cqVHtcXFRnWy1o/T/8ZPqCuSOsyJokScPHzwa
 vUwoAn2OQSFLJZgITu8+9JSlLxW40BdMHaJ+jTlOXMGDq6RHZY1FHAy8PTf43wU=
 =QjNu
 -----END PGP SIGNATURE-----

Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc

This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:

- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init

* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ARM: vexpress: remove extra timer-sp control register clearing
  ARM: dts: vexpress: disable CA9 core tile sp804 timer
  ARM: vexpress: remove sp804 OF init
  ARM: highbank: use OF init for sp804 timer
  ARM: timer-sp: convert to use CLKSRC_OF init
  OF: add empty of_device_is_available for !OF
  ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  ARM: make machine_desc->init_time default to clocksource_of_init
  ARM: arch_timer: use full 64-bit counter for sched_clock
  ARM: make sched_clock just call a function pointer
  ARM: sched_clock: allow changing to higher frequency counter

Signed-off-by: Olof Johansson <olof@lixom.net>

This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.
2013-04-17 10:10:01 -07:00
Thomas Gleixner d190e8195b idle: Remove GENERIC_IDLE_LOOP config switch
All archs are converted over. Remove the config switch and the
fallback code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-17 10:39:38 +02:00
Alexandre Courbot 7fd2bf3d32 Remove GENERIC_GPIO config option
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-16 18:47:19 +09:00
Thomas Petazzoni 95b80e0a9a arm: mach-mv78xx0: convert to use the mvebu-mbus driver
This commit convers the mach-mv78xx0 sub-architecture to use the
mvebu-mbus driver. We simply have to call mvebu_mbus_init() in the
->init_early() function, and modify the PCIe code so that it uses the
new functions provided by mvebu-mbus to create the needed PCIe
windows.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:39 +00:00
Thomas Petazzoni 5d1190ea69 arm: mach-orion5x: convert to use mvebu-mbus driver
This commit migrates the mach-orion5x platforms to use the mvebu-mbus
driver and therefore removes the Orion5x-specific addr-map code.

The dove_init_early() function now initializes the mvebu-mbus driver
by calling mvebu_mbus_init().

We also convert a number of orion5x_setup_xyz_win() calls to the
appropriate mvebu_mbus_add_window() calls, as each board was doing its
own setup for the NOR window or other devices. Ultimately, those
devices will be probed from the DT.

The common address decoding windows are now registered in the
orion5x_setup_wins() function. It is worth noting that the four PCIe
address decoding windows will ultimately no longer have to be
registered here: it will be done automatically by the PCIe driver once
Dove has been migrated to use the upcoming mvebu PCIe driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:34 +00:00
Thomas Petazzoni 7d55490277 arm: mach-dove: convert to use mvebu-mbus driver
This commit migrates the mach-dove platforms to use the mvebu-mbus
driver and therefore removes the Dove-specific addr-map code.

The dove_init_early() function now initializes the mvebu-mbus driver
by calling mvebu_mbus_init().

The address decoding windows are now registered in the
dove_setup_cpu_wins() function. It is worth noting that the four PCIe
address decoding windows will ultimately no longer have to be
registered here: it will be done automatically by the PCIe driver once
Dove has been migrated to use the upcoming mvebu PCIe driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:27 +00:00
Thomas Petazzoni 5cc0673a67 arm: mach-kirkwood: convert to use mvebu-mbus driver
This commit migrates the mach-kirkwood platforms to use the mvebu-mbus
driver and therefore removes the Kirkwood-specific addr-map code.

The kirkwood_init_early() function is now responsible for initializing
the mvebu-mbus driver by calling mvebu_mbus_init().

The address decoding windows are now registered in the
kirkwood_setup_wins() function. It is worth noting that the four PCIe
address decoding windows will ultimately no longer have to be
registered here: it will be done automatically by the PCIe driver once
Kirkwood has been migrated to use the upcoming mvebu PCIe driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:22 +00:00
Olof Johansson 567b1b0839 The imx soc changes for 3.10:
* Enable anatop, well bisa and RBC for suspend to optimize the power
   consumption a little bit
 * Clock changes for TVE, LDB, PATA, SRTC support
 * Add System Reset Controller (SRC) support for imx5 and imx6
 * Add initial imx6dl support based on imx6q code
 * Kconfig for cpufreq-cpu0, defconfig updates and few other changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZ/viAAoJEFBXWFqHsHzOyqUH/2t7CCwlfTVUJYDCeo6PaE9x
 41cV5zG6RvX1OfkRUmJ2N2klGn4zhwg6GHsCDQmvs+IODs4E7JeB9M92FAaPng71
 NnuuwCQ01iIoaTtkz8z/n3tSet3fYB+xfNCMJoWIyS0edFFkCjOgnqRsA0pHRIOp
 G6ey1kU80D0f4+DjAUg1mkIvJrZxbRKDwmwqfDGJzQ4VU7cv70n027YuMKbeMyCC
 zdeKmpKSEl9AY+O/zeMrf03zEW+kdZ4eB6cTUFlpzYwPYY9o+XHx0U0535F7/x4+
 KObUZ9Qg7liP5WO3ZzkVff5HJqPs6s/q99eOsU4/okF1x0fpq2mSgIHlSw4HpK8=
 =TuTx
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2

From Shawn Guo:
The imx soc changes for 3.10:

* Enable anatop, well bisa and RBC for suspend to optimize the power
  consumption a little bit
* Clock changes for TVE, LDB, PATA, SRTC support
* Add System Reset Controller (SRC) support for imx5 and imx6
* Add initial imx6dl support based on imx6q code
* Kconfig for cpufreq-cpu0, defconfig updates and few other changes

* tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (275 commits)
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ARM: i.MX53 Add the cko1, cko2 clock outputs.
  staging: drm/imx: Use SRC to reset IPU
  ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
  ARM: imx: do not use regmap_read for ANADIG_DIGPROG
  ARM i.MX6q: set the LDB serial clock parent to the video PLL
  ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
  ARM i.MX6q: fix ldb di divider and selector clocks
  ARM i.MX53: fix ldb di divider and selector clocks
  ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Trivial change/change conflict in arch/arm/mach-imx/mach-imx6q.c resolved.
2013-04-12 23:55:05 -07:00
Shawn Guo a862d88d3f The imx cleanup for 3.10:
* Clean up a couple of unneeded function declarations
 * Remove imx specific cpufreq driver as generic cpufreq-cpu0 works well
   as the replacement
 * Remove platform ahci support
 * Clean up unused ARCH/MACH Kconfig symbols
 * Remove a couple of unused files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZBpzAAoJEFBXWFqHsHzOfyAH/RdvhORI0rNhBAOrSxleWlMy
 AMP9x6G5tXNK/fgtxopvCiS4VXw5MB01uqJWMVM9+hx6676oCXWc/L3I6iT5l87B
 qPY/e9LyGJa5aOYczPuUT2sG+Ga8989GhOksA+L6kWHZ2df0BIB9rBRZnoPezEAx
 u2ATdioyzfj2rAnDNFOxsw6oai265mowt/f8J/7EQfxgkAMcKov7/BpVac0po55R
 tv+Hr3T7OBg3p/h5PYi5iAehVCToCKOD31QpnlhS+dmKS52w7tEO6T75INt7HzC8
 CJT0zi5jJ3/tDJsdYJ1SS4MHK4U43y0oV7cw7sO7TzNreyOB6bzTWDqhdJY2oMM=
 =N7xl
 -----END PGP SIGNATURE-----

Merge tag 'imx-cleanup-3.10' into imx/soc

The imx cleanup for 3.10:

* Clean up a couple of unneeded function declarations
* Remove imx specific cpufreq driver as generic cpufreq-cpu0 works well
  as the replacement
* Remove platform ahci support
* Clean up unused ARCH/MACH Kconfig symbols
* Remove a couple of unused files
2013-04-12 19:00:28 +08:00
Rob Herring 7a0eca7121 ARM: timer-sp: convert to use CLKSRC_OF init
This adds CLKSRC_OF based init for sp804 timer. The clock initialization is
refactored to support retrieving the clock(s) from the DT.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-04-11 15:11:17 -05:00
Olof Johansson d6e911b599 The imx cleanup for 3.10:
* Clean up a couple of unneeded function declarations
 * Remove imx specific cpufreq driver as generic cpufreq-cpu0 works well
   as the replacement
 * Remove platform ahci support
 * Clean up unused ARCH/MACH Kconfig symbols
 * Remove a couple of unused files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZBpzAAoJEFBXWFqHsHzOfyAH/RdvhORI0rNhBAOrSxleWlMy
 AMP9x6G5tXNK/fgtxopvCiS4VXw5MB01uqJWMVM9+hx6676oCXWc/L3I6iT5l87B
 qPY/e9LyGJa5aOYczPuUT2sG+Ga8989GhOksA+L6kWHZ2df0BIB9rBRZnoPezEAx
 u2ATdioyzfj2rAnDNFOxsw6oai265mowt/f8J/7EQfxgkAMcKov7/BpVac0po55R
 tv+Hr3T7OBg3p/h5PYi5iAehVCToCKOD31QpnlhS+dmKS52w7tEO6T75INt7HzC8
 CJT0zi5jJ3/tDJsdYJ1SS4MHK4U43y0oV7cw7sO7TzNreyOB6bzTWDqhdJY2oMM=
 =N7xl
 -----END PGP SIGNATURE-----

Merge tag 'imx-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

From Shawn Guo:
The imx cleanup for 3.10:

* Clean up a couple of unneeded function declarations
* Remove imx specific cpufreq driver as generic cpufreq-cpu0 works well
  as the replacement
* Remove platform ahci support
* Clean up unused ARCH/MACH Kconfig symbols
* Remove a couple of unused files

* tag 'imx-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: imx: remove mx6q.h
  ARM: imx: remove Makefile.boot
  ARM: imx: clk-imx27: Do not register peripheral clock for SSI
  ARM: imx: avic: Move avic_saved_mask_reg under CONFIG_PM
  ARM: imx: Remove cpufreq driver
  ARM: imx: remove pl310_get_save_ptr() declaration
  ARM: imx: remove duplicated function declaration

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-11 03:06:33 -07:00
Viresh Kumar 59a2e613d0 cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10 13:19:24 +02:00
Florian Fainelli 9296d94d83 USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol
Just like the OHCI counter part we just can remove the architecture
specific symbols which prevent these configuration symbols from being
selected by platforms/architectures requiring it. The original
implementation did not scale at all since it required each and every
single architecture to be added for these configuration symbols to be
selected. Now it is up to the EHCI driver and/or platform to select
these configuration symbols accordingly.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:57:44 -07:00
Arnd Bergmann 26b2da5ae5 including fix for GENERIC_GPIO based on previous pull-request for timer-samsung
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYvj+AAoJEA0Cl+kVi2xqyK8P/09bx/H2Ud/1WL3/eGV3qfCd
 MuSGk/nIHCZ75MBQnIwtKoJ44cyqopJh8xC5wptORMKP6k9MDh5gXYPiClmAQBOT
 82SH0zZorPtANMHivTvxWr7mBs0/fCIXjR6Sg43vMRzM5Nz9l6RFjzZr7RiAm7lr
 G1gjfG3LDAoaiomVG6Okof7og4wfJQe9ROdRe2oCRepCCUJ9l5tYptYwA/ulo6ge
 3H/+OcxkOQYu7X+zKZWjnZTFLzBkaivnfUxQo969yowrAtdTkrWQdDEih+hsxXl+
 KPEhwhKJnS7Kl6ZRSK2/Y8baNIZrFHsc7r4ZdZ7IVVhAoPCQsO0C0k8w5hD1mXwL
 7kEtw/0uioTb5uE03GUdCg7Ibq+kVhAdRLfBDFx7rHb9Ef7WJ/OZXj2zYv3yHFrG
 PQA58jJ75uBym/104QdlB5D68bn8D2+HqqYu1glnd+SnjabtNtNXiONRo6HWEBfM
 V2mGlDBUps91zcuiUKlNkO1v0ZK63VmxDj+JnKvKbI3gXCMeZg9aGYSorGSlq6vv
 t8Qws2cQKMdkJzYQNqOXOYl32T3tvRjWbu0g874w6lXGBxt7sQgD8maljdFPH8/s
 YC/3gk7E6ugOiQ1dqBQEjR29cLwYQ6SzF9t3N8kvLQog81VS3uVDxt2sIwaqariS
 wHPrZPKsma6XE5jldGAA
 =L8iS
 -----END PGP SIGNATURE-----

Merge tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

including fix for GENERIC_GPIO based on previous pull-request for timer-samsung

* tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: change GENERIC_GPIO to ARCH_REQUIRE_GPIOLIB

Signed-off-by: Arnd Bergmann <arnd@anrdb.de>
2013-04-09 22:47:38 +02:00
Arnd Bergmann 19ce4f4a03 add suppport common clock framework for exynos
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYuw1AAoJEA0Cl+kVi2xq53MP/Rimo8kL9e/dMrgxqvtQ198N
 csKzsAvOFSI69x0VupVOGfMSMDmltIaimyljJO3YrUvy+UOS3irWTHqu1JKq8+HX
 oaym2KirVFpGjcll4E2nyeZ18vL8Czt0bNPh2QVuHinwbETtAuq0CBfeAQLWA1Xs
 I/bbVKryocLwMNd5iqttSwGVwNZz14ceheliSHkneDeTaZJYQ0nSCLL7qmXncRFl
 Z1Xe4aZRTdiU8JZiRN6G3Q2UdhcKRwZPSZrftbVpDRBegnaZp6htUszD2GFX3SJH
 lV4ifgh9XVawRPE8Op00lX9fEjGe3EDP5kqqFRqht+mvr15vs2eFNiIIYOyjvBDU
 GfCK2Ij2QaUCiIweJOcO5SGkLKYqyVg+G5k7Z5M5FGwwBhEdZRPkZE++9cWG8K/m
 ziuJxAl9fK47NwUk4oz15e6JD6gFbEwqYf1f7RdvdRBiclarIuk2rha9BsoeOFM3
 LBpGhWW4rcwEH87e0MjkvoopYl4ZHLtiZYk6cEg0rmAxKLvQjdZCZM+A707RG6DC
 CZiY6Iu5pSOIz4FweY42mXaANkdBlzn4r7/cPJj7S4umQlkEjYtwXEEziK50lc+g
 b7aZEvztQhFDw3lHhFeR44FCy7a1r5NjAZASshHJ72h3xNXrp+9bbugpbkdQVUKj
 tpL2eMZQn/lK6T1h8SwE
 =JEIy
 -----END PGP SIGNATURE-----

Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add suppport common clock framework for exynos

* tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits)
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: exynos5250: register display block gate clocks to common clock framework
  clk: exynos4: Add support for SoC-specific register save list
  clk: exynos4: Add missing registers to suspend save list
  clk: exynos4: Remove E4X12 prefix from SRC_DMC register
  clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register
  clk: exynos4: Add E4210 prefix to LCD1 clock registers
  clk: exynos4: Remove SoC-specific registers from save list
  clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions
  clk: exynos4: Define {E,V}PLL registers
  clk: exynos4: Add missing mout_sata on Exynos4210
  clk: exynos4: Add missing CMU_TOP and ISP clocks
  clk: exynos4: Add G3D clocks
  clk: exynos4: Add camera related clock definitions
  clk: exynos4: Export mout_core clock of Exynos4210
  clk: samsung: Remove unimplemented ops for pll
  clk: exynos4: Export clocks used by exynos cpufreq drivers
  ...

[arnd: add missing #address-cells property in mshc DT node]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 22:28:45 +02:00
Arnd Bergmann 228e3023eb add support exynos mct device tree and move into drivers/clocksource
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC
 +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v
 jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8
 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/
 BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz
 ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ
 /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q
 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn
 FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8
 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI
 uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm
 CD/r/wUs1ktL2rPNcXVz
 =Os9U
 -----END PGP SIGNATURE-----

Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 22:18:24 +02:00
Arnd Bergmann 894b7382cf s3c24xx irq cleanup and move into drivers/irqchip
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYueLAAoJEA0Cl+kVi2xqRggP/1dM6P8T68AB8iJC1DQuE3B7
 d6Edy+mRRU1lFvJ0QCn/QxzWl7r3pYr47yvMcKpnlFpyaqOMtqVGzff5rCts6Hsu
 9km3UA42W7dO9/NLdSOg8GKZPV/3pFTjEnNNdux17pgihBv4ZciIGiivek5kVXCR
 mDh7lMAA6GJuEHxoaUumUp0v+dVfquQcRra8ZxV9rHpHzfy48YFJO7wPlTd2b0EY
 fFMq/cJxHre2+jEuLZiuEvuRgBKpXG1oc7BeU5Gt3moCTdD+HRODEgSZJaTUmAtK
 /jKKUCjvJaDEuL5Xr4Votby0bNniEq4XGGkIAH9iNC47S8tzsiyKNhl5y1H1lFcv
 JOZvVFQ0aT4XY+vX8wXwNfafsecF4n4lUky6xUORDH8NBMsuUw9PCQmGLpZY/IqR
 j/XhO2KLkb7HaIHNj2DsMwslQiTj9dxSH8C+zBQbVoIb/3XipQooUx9FdLDA99a/
 Ni9U6xAF9L4B48rIamB0Af10Ig5sKCE1dFS15yJy2KTesABUyxbbbEVyi0sl1Ugt
 zEWpcISUdKbA0GDivN/hsBsfFBkwG4F/Su6iF62NSxWlXj9kSOpTdjluM0haUlfG
 nbYU5lyF8dVUFLaWBdRF6tYW9EollgmXJBDdaIeS6qVoqWOy0Cjz+VS4eOvAm0ew
 Hi2tJDHMW41K3jBVxJV6
 =Sitv
 -----END PGP SIGNATURE-----

Merge tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

s3c24xx irq cleanup and move into drivers/irqchip

* tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  irqchip: s3c24xx: add devicetree support
  irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
  irqchip: s3c24xx: globally keep track of the created intc instances
  irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
  irqchip: s3c24xx: fix irqlist of second s3c2416 controller
  irqchip: s3c24xx: fix comments on some camera interrupts
  ARM: S3C24XX: move irq driver to drivers/irqchip
  ARM: S3C24XX: add handle_irq function
  ARM: S3C24XX: make s3c24xx_init_intc static
  ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
  ARM: S3C24XX: fix irq parent check
  ARM: S3C24XX: fix redundant checks in the irq mapping function

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 22:05:50 +02:00