Commit Graph

57 Commits

Author SHA1 Message Date
Martin K. Petersen 17be8c2450 block: bdev_stack_limits wrapper
DM does not want to know about partition offsets.  Add a partition-aware
wrapper that DM can use when stacking block devices.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-01-11 14:29:20 +01:00
Martin K. Petersen fe0b393f2c block: Correct handling of bottom device misaligment
The top device misalignment flag would not be set if the added bottom
device was already misaligned as opposed to causing a stacking failure.

Also massage the reporting so that an error is only returned if adding
the bottom device caused the misalignment.  I.e. don't return an error
if the top is already flagged as misaligned.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-01-11 14:29:19 +01:00
Martin K. Petersen 81744ee44a block: Fix incorrect alignment offset reporting and update documentation
queue_sector_alignment_offset returned the wrong value which caused
partitions to report an incorrect alignment_offset.  Since offset
alignment calculation is needed several places it has been split into a
separate helper function.  The topology stacking function has been
updated accordingly.

Furthermore, comments have been added to clarify how the stacking
function works.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-29 08:35:35 +01:00
Martin K. Petersen 9504e0864b block: Fix topology stacking for data and discard alignment
The stacking code incorrectly scaled up the data offset in some cases
causing misaligned devices to report alignment.  Rewrite the stacking
algorithm to remedy this and apply the same alignment principles to the
discard handling.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-21 15:55:51 +01:00
Jens Axboe b568be627a block: temporarily disable discard granularity
Commit 86b3728141 adds a check for
misaligned stacking offsets, but it's buggy since the defaults are 0.
Hence all dm devices that pass in a non-zero starting offset will
be marked as misaligned amd dm will complain.

A real fix is coming, in the mean time disable the discard granularity
check so that users don't worry about dm reporting about misaligned
devices.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-16 09:16:41 +01:00
Martin K. Petersen 98262f2762 block: Allow devices to indicate whether discarded blocks are zeroed
The discard ioctl is used by mkfs utilities to clear a block device
prior to putting metadata down.  However, not all devices return zeroed
blocks after a discard.  Some drives return stale data, potentially
containing old superblocks.  It is therefore important to know whether
discarded blocks are properly zeroed.

Both ATA and SCSI drives have configuration bits that indicate whether
zeroes are returned after a discard operation.  Implement a block level
interface that allows this information to be bubbled up the stack and
queried via a new block device ioctl.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 09:24:48 +01:00
Randy Dunlap ad5ebd2fa2 block: jiffies fixes
Use HZ-independent calculation of milliseconds.
Add jiffies.h where it was missing since functions or macros
from it are used.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-11 13:47:45 +01:00
Martin K. Petersen 86b3728141 block: Expose discard granularity
While SSDs track block usage on a per-sector basis, RAID arrays often
have allocation blocks that are bigger.  Allow the discard granularity
and alignment to be set and teach the topology stacking logic how to
handle them.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-10 11:50:21 +01:00
Randy Dunlap c7ebf0657b blk-settings: fix function parameter kernel-doc notation
Fix kernel-doc notation in blk-settings.c::blk_queue_max_discard_sectors().

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-12 08:20:47 +02:00
Christoph Hellwig 67efc92580 block: allow large discard requests
Currently we set the bio size to the byte equivalent of the blocks to
be trimmed when submitting the initial DISCARD ioctl.  That means it
is subject to the max_hw_sectors limitation of the HBA which is
much lower than the size of a DISCARD request we can support.
Add a separate max_discard_sectors tunable to limit the size for discard
requests.

We limit the max discard request size in bytes to 32bit as that is the
limit for bio->bi_size.  This could be much larger if we had a way to pass
that information through the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:19:34 +02:00
Christoph Hellwig c15227de13 block: use normal I/O path for discard requests
prepare_discard_fn() was being called in a place where memory allocation
was effectively impossible.  This makes it inappropriate for all but
the most trivial translations of Linux's DISCARD operation to the block
command set.  Additionally adding a payload there makes the ownership
of the bio backing unclear as it's now allocated by the device driver
and not the submitter as usual.

It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether
the queue supports discard operations or not.  blkdev_issue_discard now
allocates a one-page, sector-length payload which is the right thing
for the common ATA and SCSI implementations.

The mtd implementation of prepare_discard_fn() is replaced with simply
checking for the request being a discard.

Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx>
which did the prepare_discard_fn but not the different payload allocation
yet.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:19:30 +02:00
Martin K. Petersen 5dee2477df block: Do not clamp max_hw_sectors for stacking devices
Stacking devices do not have an inherent max_hw_sector limit.  Set the
default to INT_MAX so we are bounded only by capabilities of the
underlying storage.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:45 +02:00
Martin K. Petersen 80ddf247c8 block: Set max_sectors correctly for stacking devices
The topology changes unintentionally caused SAFE_MAX_SECTORS to be set
for stacking devices.  Set the default limit to BLK_DEF_MAX_SECTORS and
provide SAFE_MAX_SECTORS in blk_queue_make_request() for legacy hw
drivers that depend on the old behavior.

Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:45 +02:00
Martin K. Petersen 3c5820c743 block: Optimal I/O limit wrapper
Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper
around it. DM needs this to avoid poking at the queue_limits directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Martin K. Petersen 7e5f5fb09e block: Update topology documentation
Update topology comments and sysfs documentation based upon discussions
with Neil Brown.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-01 10:24:35 +02:00
Martin K. Petersen 70dd5bf3b9 block: Stack optimal I/O size
When stacking block devices ensure that optimal I/O size is scaled
accordingly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-01 10:24:35 +02:00
Martin K. Petersen 7c958e3264 block: Add a wrapper for setting minimum request size without a queue
Introduce blk_limits_io_min() and make blk_queue_io_min() call it.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-01 10:24:35 +02:00
Martin K. Petersen fef246672b block: Make blk_queue_stack_limits use the new stacking interface
blk_queue_stack_limits() has been superceded by blk_stack_limits() and
disk_stack_limits().  Wrap the function call for now, we'll deprecate it
later.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-01 10:24:35 +02:00
Jens Axboe a4e7d46407 block: always assign default lock to queues
Move the assignment of a default lock below blk_init_queue() to
blk_queue_make_request(), so we also get to set the default lock
for ->make_request_fn() based drivers. This is important since the
queue flag locking requires a lock to be in place.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-28 09:07:29 +02:00
Randy Dunlap f740f5ca05 Fix kernel-doc parameter name typo in blk-settings.c:
Warning(block/blk-settings.c:108): No description found for parameter 'lim'
Warning(block/blk-settings.c:108): Excess function parameter 'limits' description in 'blk_set_default_limits'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 09:18:32 +02:00
Martin K. Petersen 3a02c8e814 block: Fix bounce_pfn setting
Correct stacking bounce_pfn limit setting and prevent warnings on
32-bit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-18 09:56:20 +02:00
Martin K. Petersen e475bba2fd block: Introduce helper to reset queue limits to default values
DM reuses the request queue when swapping in a new device table
Introduce blk_set_default_limits() which can be used to reset the the
queue_limits prior to stacking devices.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:23:52 +02:00
Jens Axboe 0989a025d2 block: don't overwrite bdi->state after bdi_init() has been run
Move the defaults to where we do the init of the backing_dev_info.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Randy Dunlap 8ebf975608 block: fix kernel-doc in recent block/ changes
Fix kernel-doc warnings in recently changed block/ source code.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 20:14:23 -07:00
Martin K. Petersen 77634f33d4 block: Add missing bounce_pfn stacking and fix comments
DM no longer needs to set limits explicitly when calling blk_stack_limits.
Let the latter automatically deal with bounce_pfn scaling.

Fix kerneldoc variable names.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:23:22 +02:00
Jens Axboe 9df1bb9b51 Revert "block: Fix bounce limit setting in DM"
This reverts commit a05c0205ba.

DM doesn't need to access the bounce_pfn directly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:22:57 +02:00
Martin K. Petersen a05c0205ba block: Fix bounce limit setting in DM
blk_queue_bounce_limit() is more than a wrapper about the request queue
limits.bounce_pfn variable.  Introduce blk_queue_bounce_pfn() which can
be called by stacking drivers that wish to set the bounce limit
explicitly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-03 09:33:18 +02:00
Mike Snitzer 5d85d3247c block: export blk_stack_limits()
DM needs to use blk_stack_limits(), so it needs to be exported.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-28 11:04:53 +02:00
Martin K. Petersen c72758f337 block: Export I/O topology for block devices and partitions
To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen 025146e13b block: Move queue limits to an embedded struct
To accommodate stacking drivers that do not have an associated request
queue we're moving the limits to a separate, embedded structure.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen ae03bf639a block: Use accessor functions for queue limits
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Martin K. Petersen e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Tejun Heo cd0aca2d55 block: fix queue bounce limit setting
Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily

All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that.  However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.

As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer.  Fix it.  While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:09 +02:00
Alan Cox 8feb4d20b4 pata_artop: typo
Fix a typo (this was in the original patch but was not merged when the code
fixes were for some reason)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06 20:00:29 -04:00
FUJITA Tomonori 18af8b2ca3 block: use min_not_zero in blk_queue_stack_limits
zero is invalid for max_phys_segments, max_hw_segments, and
max_segment_size. It's better to use use min_not_zero instead of
min. min() works though (because the commit 0e435ac makes sure that
these values are set to the default values, non zero, if a queue is
initialized properly).

With this patch, blk_queue_stack_limits does the almost same thing
that dm's combine_restrictions_low() does. I think that it's easy to
remove dm's combine_restrictions_low.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Milan Broz 0e435ac26e block: fix setting of max_segment_size and seg_boundary mask
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:55:55 +01:00
Peter Zijlstra 713ada9ba9 block: move q->unplug_work initialization
modprobe loop; rmmod loop effectively creates a blk_queue and destroys it
which results in q->unplug_work being canceled without it ever being
initialized.

Therefore, move the initialization of q->unplug_work from
blk_queue_make_request() to blk_alloc_queue*().

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Kiyoshi Ueda ef9e3facdf block: add lld busy state exporting interface
This patch adds an new interface, blk_lld_busy(), to check lld's
busy state from the block layer.
blk_lld_busy() calls down into low-level drivers for the checking
if the drivers set q->lld_busy_fn() using blk_queue_lld_busy().

This resolves a performance problem on request stacking devices below.

Some drivers like scsi mid layer stop dispatching request when
they detect busy state on its low-level device like host/target/device.
It allows other requests to stay in the I/O scheduler's queue
for a chance of merging.

Request stacking drivers like request-based dm should follow
the same logic.
However, there is no generic interface for the stacked device
to check if the underlying device(s) are busy.
If the request stacking driver dispatches and submits requests to
the busy underlying device, the requests will stay in
the underlying device's queue without a chance of merging.
This causes performance problem on burst I/O load.

With this patch, busy state of the underlying device is exported
via q->lld_busy_fn().  So the request stacking driver can check it
and stop dispatching requests if busy.

The underlying device driver must return the busy state appropriately:
    1: when the device driver can't process requests immediately.
    0: when the device driver can process requests immediately,
       including abnormal situations where the device driver needs
       to kill all requests.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Jens Axboe 242f9dcb8b block: unify request timeout handling
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.

Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:13 +02:00
Harvey Harrison aeb3d3a81e block: kmalloc args reversed, small function definition fixes
Noticed by sparse:
block/blk-softirq.c:156:12: warning: symbol 'blk_softirq_init' was not declared. Should it be static?
block/genhd.c:583:28: warning: function 'bdget_disk' with external linkage has definition
block/genhd.c:659:17: warning: incorrect type in argument 1 (different base types)
block/genhd.c:659:17:    expected unsigned int [unsigned] [usertype] size
block/genhd.c:659:17:    got restricted gfp_t
block/genhd.c:659:29: warning: incorrect type in argument 2 (different base types)
block/genhd.c:659:29:    expected restricted gfp_t [usertype] flags
block/genhd.c:659:29:    got unsigned int
block: kmalloc args reversed

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Jens Axboe c7c22e4d5c block: add support for IO CPU affinity
This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.

In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.

This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Randy Dunlap 710027a48e Add some block/ source files to the kernel-api docbook. Fix kernel-doc notation in them as needed. Fix changed function parameter names. Fix typos/spellos. In comments, change REQ_SPECIAL to REQ_TYPE_SPECIAL and REQ_BLOCK_PC to REQ_TYPE_BLOCK_PC.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
David Woodhouse fb2dce862d Add 'discard' request handling
Some block devices benefit from a hint that they can forget the contents
of certain sectors. Add basic support for this to the block core, along
with a 'blkdev_issue_discard()' helper function which issues such
requests.

The caller doesn't get to provide an end_io functio, since
blkdev_issue_discard() will automatically split the request up into
multiple bios if appropriate. Neither does the function wait for
completion -- it's expected that callers won't care about when, or even
_if_, the request completes. It's only a hint to the device anyway. By
definition, the file system doesn't _care_ about these sectors any more.

[With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and
Jens Axboe <jens.axboe@oracle.com]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
FUJITA Tomonori 27f8221af4 block: add blk_queue_update_dma_pad
This adds blk_queue_update_dma_pad to prevent LLDs from overwriting
the dma pad mask wrongly (we added blk_queue_update_dma_alignment due
to the same reason).

This also converts libata to use blk_queue_update_dma_pad instead of
blk_queue_dma_pad.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-04 09:52:13 +02:00
Neil Brown e7e72bf641 Remove blkdev warning triggered by using md
As setting and clearing queue flags now requires that we hold a spinlock
on the queue, and as blk_queue_stack_limits is called without that lock,
get the lock inside blk_queue_stack_limits.

For blk_queue_stack_limits to be able to find the right lock, each md
personality needs to set q->queue_lock to point to the appropriate lock.
Those personalities which didn't previously use a spin_lock, us
q->__queue_lock.  So always initialise that lock when allocated.

With this in place, setting/clearing of the QUEUE_FLAG_PLUGGED bit will no
longer cause warnings as it will be clear that the proper lock is held.

Thanks to Dan Williams for review and fixing the silly bugs.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Nick Piggin <npiggin@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jacek Luczak <difrost.kernel@gmail.com>
Cc: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:11:15 -07:00
Harvey Harrison 24c03d47d0 block: remove remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:04:02 -07:00
Nick Piggin 75ad23bc0f block: make queue flags non-atomic
We can save some atomic ops in the IO path, if we clearly define
the rules of how to modify the queue flags.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:33 +02:00
Adrian Bunk 657e93be35 unexport blk_max_pfn
blk_max_pfn can now be unexported.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 09:50:34 +02:00
Andrea Arcangeli 00d61e3e8c Fix bounce setting for 64-bit
Looking a bit closer into this regression the reason this can't be
right is that dma_addr common default is BLK_BOUNCE_HIGH and most
machines have less than 4G. So if you do:

    if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
	dma = 1

that will translate to:

     if (BLK_BOUNCE_HIGH <= BLK_BOUNCE_HIGH)
     	dma = 1

So for 99% of hardware this will trigger unnecessary GFP_DMA
allocations and isa pooling operations.

Also note how the 32bit code still does b_pfn < blk_max_low_pfn.

I guess this is what you were looking after. I didn't verify but as
far as I can tell, this will stop the regression with isa dma
operations at boot for 99% of blkdev/memory combinations out there and
I guess this fixes the setups with >4G of ram and 32bit pci cards as
well (this also retains symmetry with the 32bit code).

Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-02 09:06:44 +02:00
Harvey Harrison 448da4d262 block: remove extern on function definition
Intoduced between 2.6.25-rc2 and -rc3
block/blk-settings.c:319:12: warning: function 'blk_queue_dma_drain' with external linkage has definition

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04 11:30:18 +01:00