Commit Graph

1297 Commits

Author SHA1 Message Date
Greg Kroah-Hartman 38a382ae5d Kobject: convert arch/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:39 -08:00
Greg Kroah-Hartman c199790a8b Kobject: change arch/ia64/kernel/topology.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:29 -08:00
Luck, Tony 1a499150e4 [IA64] Fix unaligned handler for floating point instructions with base update
The compiler team did the hard work for this distilling a problem in
large fortran application which showed up when applied to a 290MB input
data set down to this instruction:

	ldfd f34=[r17],-8

Which they noticed incremented r17 by 0x10 rather than decrementing it
by 8 when the value in r17 caused an unaligned data fault.  I tracked
it down to some bad instruction decoding in unaligned.c. The code
assumes that the 'x' bit can determine whether the instruction is
an "ldf" or "ldfp" ... which it is for opcode=6 (see table 4-29 on
page 3:302 of the SDM).  But for opcode=7 the 'x' bit is irrelevent,
all variants are "ldf" instructions (see table 4-36 on page 3:306).

Note also that interpreting the instruction as "ldfp" means that the
"paired" floating point register (f35 in the example here) will also
be corrupted.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-01-15 14:26:55 -08:00
Russ Anderson 2022c1f136 [IA64] Update Altix nofault code
Montecito and Montvale behaves slightly differently than previous
Itanium processors, resulting in the MCA due to a failed PIO read
to sometimes surfacing outside the nofault code.  This code is
based on discussions with Intel CPU architects and verified at
customer sites.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-01-03 13:22:54 -08:00
Hidetoshi Seto ed5d4026ae [IA64] Adjust CMCI mask on CPU hotplug
Currently CMCI mask of hot-added CPU is always disabled after CPU hotplug.
We should adjust this mask depending on CMC polling state.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 12:30:47 -08:00
Jan Beulich 285fbd6633 [IA64] make flush_tlb_kernel_range() an inline function
This fixes an unused variable warning in mm/vmalloc.c.

Tony: also fix resulting fallout in uncached.c with a
typo in args to flush_tlb_kernel_range().

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 12:30:30 -08:00
Simon Horman 17fbe0043e [IA64] Guard elfcorehdr_addr with #if CONFIG_PROC_FS
Access to elfcorehdr_addr needs to be guarded by #if CONFIG_PROC_FS
as well as the existing #if guards.

Fixes the following build problem:

arch/ia64/hp/common/built-in.o: In function
`sba_init':arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr'
:arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr'

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 11:32:52 -08:00
Russ Anderson 64135fa97c [IA64] Fix Altix BTE error return status
The Altix shub2 BTE error detail bits are in a different location
than on shub1.  The current code does not take this into account
resulting in all shub2 BTE failures mapping to "unknown".

This patch reads the error detail bits from the proper location,
so the correct BTE failure reason is returned for both shub1
and shub2.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 11:19:19 -08:00
Hidetoshi Seto 091062284c [IA64] Remove assembler warnings on head.S
This patch removes the following assembler warning messages.

  AS      arch/ia64/kernel/head.o
arch/ia64/kernel/head.S: Assembler messages:
arch/ia64/kernel/head.S:1179: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data)
arch/ia64/kernel/head.S:1179: Warning: Only the first path encountering the conflict is reported
arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage
arch/ia64/kernel/head.S:1180: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data)
arch/ia64/kernel/head.S:1180: Warning: Only the first path encountering the conflict is reported
arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage
 :
arch/ia64/kernel/head.S:1213: Warning: Use of 'ldf.fill.nta' violates RAW dependency 'CR[PTA]' (data)
arch/ia64/kernel/head.S:1213: Warning: Only the first path encountering the conflict is reported
arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 11:15:12 -08:00
Kenji Kaneshige 373167e80c [IA64] Remove compiler warinings about uninitialized variable in irq_ia64.c
This patch removes the following compiler warning messages.

  CC      arch/ia64/kernel/irq_ia64.o
arch/ia64/kernel/irq_ia64.c: In function 'create_irq':
arch/ia64/kernel/irq_ia64.c:343: warning: 'domain.bits[0u]' may be used uninitialized in this function
arch/ia64/kernel/irq_ia64.c: In function 'assign_irq_vector':
arch/ia64/kernel/irq_ia64.c:203: warning: 'domain.bits[0u]' may be used uninitialized in this function

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 11:13:27 -08:00
Ian Wienand e384f41409 [IA64] set_thread_area fails in IA32 chroot
I tried to upgrade an IA32 chroot on my IA64 to a new glibc with TLS.
It kept dying because set_thread_area was returning -ESRCH
(bugs.debian.org/451939).

I instrumented arch/ia64/ia32/sys_ia32.c:get_free_idx() and ended up
seeing output like

[pid] idx   desc->a  desc->b
-----------------------------
[2710] 0 -> c6b0ffff 40dff31b
[2710] 1 -> 0 0
[2710] 2 -> 0 0

[2710] 0 -> c6b0ffff 40dff31b
[2710] 1 -> c6b0ffff 40dff31b
[2710] 2 -> 0 0

[2711] 0 -> c6b0ffff 40dff31b
[2711] 1 -> c6b0ffff 40dff31b
[2711] 2 -> 48c0ffff 40dff317

which suggested to me that TLS pointers were surviving exec() calls,
leading to GDT pointers filling up and the eventual failure of
get_free_idx().

I think the solution is flushing the tls array on exec.

Signed-Off-By: Ian Wienand <ianw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19 11:06:40 -08:00
Luck, Tony ee211b37aa [IA64] print kernel release in OOPS to make kerneloops.org happy
The ia64 oops message doesn't include the kernel version, which
makes it hard to automatically categorize oops messages scraped
from mailing lists and bug databases.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-18 17:04:04 -08:00
Joe Perches 313d8e57b0 [IA64] Two trivial spelling fixes
s/addres/address/
s/performanc/performance/

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-18 17:02:21 -08:00
de Dinechin, Christophe (Integrity VM) aec103bfa6 [IA64] Avoid unnecessary TLB flushes when allocating memory
Improve performance of memory allocations on ia64 by avoiding a global TLB
purge to purge a single page from the file cache. This happens whenever we
evict a page from the buffer cache to make room for some other allocation.

Test case: Run 'find /usr -type f | xargs cat > /dev/null' in the
background to fill the buffer cache, then run something that uses memory,
e.g. 'gmake -j50 install'. Instrumentation showed that the number of
global TLB purges went from a few millions down to about 170 over a 12
hours run of the above.

The performance impact is particularly noticeable under virtualization,
because a virtual TLB is generally both larger and slower to purge than
a physical one.

Signed-off-by: Christophe de Dinechin <ddd@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-18 16:56:50 -08:00
Nick Piggin 3cdc7fc7fd [IA64] ia32 nopage
Convert ia64's ia32 support from nopage to fault.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-18 16:55:46 -08:00
Shi Weihua 2018df76d2 [IA64] signal: remove redundant code in setup_sigcontext()
This patch removes some redundant code in the function setup_sigcontext().

The registers ar.ccv,b7,r14,ar.csd,ar.ssd,r2-r3 and r16-r31 are not
restored in restore_sigcontext() when (flags & IA64_SC_FLAG_IN_SYSCALL) is
true.  So we don't need to zero those variables in setup_sigcontext().

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-18 16:55:15 -08:00
Kenji Kaneshige aa0ebec9cf [IA64] Fix iosapic interrupt delivery mode for CPE
If "CPEI Processor Override" bit is not set in "Platform Interrupt
Source Flags" in "Platform Interrupt Sources Structure" in ACPI MADT,
the target processor of CPEI is restricted to a specific CPU. Because
of this, the delivery mode for CPEI should be IOSAPIC_FIXED.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:13:03 -08:00
Shaohua Li 3661999a17 [IA64] kprobe: make kreturn probe handler stack unwind correct
Restore regs->ccr_iip before kreturn probe handler runs. In this way, if
probe handler does unwind, unwind can correctly get the stack trace.

Fixes: http://sourceware.org/bugzilla/show_bug.cgi?id=5051

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:12:50 -08:00
Roel Kluin 965d747264 [IA64] operator priority fix in acpi_map_lsapic()
'!' has a higher priority than '&', so as was
this won't test the first bit, but rather evaluates to false for any non-zero
lsapic->lapic_flags.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:12:30 -08:00
Joe Perches c2eeb321a8 [IA64] Add missing "space" to concatenated strings
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:12:17 -08:00
Li Zefan 685c7f5d36 [IA64] make full use of macro efi_md_size
Macro efi_md_size is defined in efi.c, and here we apply it throughout
efi.c.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:12:00 -08:00
Bernhard Walle b898a424ed [IA64] rename _bss to __bss_start
Rename _bss to __bss_start as on other architectures.  That makes it
possible to use the <linux/sections.h> instead of own declarations.  Also
add __bss_stop because that symbol exists on other architectures.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:11:49 -08:00
Mike Habeck afc2cf35b4 [IA64] SGI Altix : fix bug in sn_io_late_init()
When initializing pci_controller->node to point to the closest node we need
to take into consideration that a PIC PCI Bridge ASIC can be connected to a
headless/memless node just like the TIOCP and TIOCE Bridge ASICs

Signed-off-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:11:37 -08:00
Simon Horman 9e004ebd2d [IA64] iosapic cleanup
Make some IOSAPIC functions static and remove one that is unused.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:11:12 -08:00
Shi Weihua b9ab117c2f [IA64] signal : fix missing error checkings
Not all the return value of __copy_from_user and
__put_user is checked.This patch fixed it.

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:10:59 -08:00
Andrew Morton bdc2619ab9 [IA64] export copy_page() to modules
With the unionfs patch applied I get

ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined!

the other architectures (some, at least) export copy_page() so I guess ia64
should also do so.

To do this we need to move the copy_page() functions out of lib.a and into
built-in.o and add the EXPORT_SYMBOL().

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 16:10:19 -08:00
Andrew Morton ff08e657f3 [IA64] don't assume that unwcheck.py is executable
Don't assume that this file has execute permissions.  For example, patch(1)
loses that information.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 14:42:08 -08:00
Andrew Morton 1f0abae878 [IA64] increase .data.patch offset
/opt/crosstool/gcc-3.4.5-glibc-2.3.6/ia64-unknown-linux-gnu/lib/gcc/ia64-unknown-linux-gnu/3.4.5/../../../../ia64-unknown-linux-gnu/bin/ld: section .data.patch [a000000000000500 -> a000000000000507] overlaps section .dynamic [a0000000000003c8 -> a000000000000507]

This only appears to be a problem with strangely configured
cross-compilation ... native compilers don't have this issue.
But in the interests of helping others at least compile for
ia64, this can go in. -Tony

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-07 14:28:02 -08:00
Yasunori Goto 887c3cb188 Add IORESOUCE_BUSY flag for System RAM
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY.

But ia64 registers it as IORESOURCE_MEM only.
In addition, memory hotplug code registers new memory as IORESOURCE_MEM too.

This difference causes a failure of memory unplug of x86-64.  This patch
fixes it.

This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI
device.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Luck, Tony" <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
George Beshers 7f6ff62a8f [IA64] IOSAPIC bogus error cleanup
On Altix (sn2) machines the "Error parsing MADT" message is
misleading because the lack of IOSAPIC entries is expected.

Since I am sure someone will ask, I have been told that
the chance of this changing anytime soon is close to nil.

Signed-off-by: George Beshers <gbeshers@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09 13:09:40 -08:00
Russ Anderson b8de471f37 [IA64] Update printing of feature set bits
Newer Itanium versions have added additional processor feature set
bits.  This patch prints all the implemented feature set bits.  Some
bit descriptions have not been made public.  For those bits, a generic
"Feature set X bit Y" message is printed.  Bits that are not implemented
will no longer be printed.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09 13:05:30 -08:00
Kenji Kaneshige c9d059def2 [IA64] Fix IOSAPIC delivery mode setting
Fix the problem that redirect hit bit in I/O SAPIC RTE is set even
when it must be disabled (e.g. nointroute boot option is set, CPU
hotplug is enabled or percpu vector is enabled).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09 13:01:09 -08:00
Dean Nelson 4c013f5c7e [IA64] XPC heartbeat timer function must run on CPU 0
Currently, XPC's heartbeat timer function runs on whatever CPU modprobe/insmod
ran on when XPC was started. To avoid the heartbeat from being delayed for
long periods the timer function must run on CPU 0.

N.B. Altix doesn't currently allow cpu0 to be taken offline, so this is
safe for now.  This code must be revised when offline of cpu0 is enabled.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09 12:59:14 -08:00
Kenji Kaneshige ddd6fc7923 [IA64] Clean up /proc/interrupts output
Clean up /proc/interrupts output on the system that has 10 or more
CPUs.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 15:40:52 -08:00
Russ Anderson 1f3b6045f7 [IA64] Disable/re-enable CPE interrupts on Altix
When the CPE handler encounters too many CPEs (such as a solid single
bit memory error), it sets up a polling timer and disables the CPE
interrupt (to avoid excessive overhead logging the stream of single
bit errors).  disable_irq_nosync() calls chip->disable() to provide
a chipset specifiec interface for disabling the interrupt.  This patch
adds the Altix specific support to disable and re-enable the CPE interrupt.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 15:40:31 -08:00
Russ Anderson adb34022eb [IA64] Clean-up McKinley Errata message
No need to print "McKinley Errata 9 workaround not needed; disabling it"
on every non-McKinley Itanium, which at this point is almost all of them.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 15:40:07 -08:00
Peter Chubb c5d07d6ccc [IA64] Add gate.lds to list of files ignored by Git
If you build the kernel `in-place' then do a git update, git
complains about arch/ia64/kernel/gate.lds being modified and
untracked.

Add that (generated) file to a .gitignore file.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 15:39:45 -08:00
Tony Luck 4b9ddc7cf2 [IA64] Fix section mismatch in contig.c version of per_cpu_init()
There is a section mismatch when building CONFIG_FLATMEM=y kernels
that also have CONFIG_HOTPLUG_CPU=y

WARNING: vmlinux.o(.text+0x5a902): Section mismatch: reference to \
.init.text:__alloc_bootmem (between 'per_cpu_init' and 'count_pages')

The issue occurs because per_cpu_init() in mm/contig.c is
marked __cpuinit (which is #define'd to nothing on a hot
plug cpu configuration) call __alloc_bootmem() (which is
an __init function).  The usage is actually safe because
the __alloc_bootmem() is inside an "if (first_time)" test
so that the call is only made while it is still legal to
do so.

But the warning is irritating.  Move the allocation to
find_memory().

Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 15:14:45 -08:00
Li Zefan 4b07ae9b9d [IA64] Wrong args to memset in efi_gettimeofday()
Not sizeof(ptr) ... we meant to say sizeof(*ptr).

Also moved the memset to the error path (the normal path overwrites
every field in the structure anyway) -Tony

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 13:40:39 -08:00
Lucas Woods 8d0a6e4da5 [IA64] Remove duplicate includes from ia32priv.h
Don't need asm/processor.h twice

Signed-off-by: Lucas Woods <woodzy@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 13:30:47 -08:00
Roel Kluin b17de36195 [IA64] fix number of bytes zeroed by sys_fw_init() in arch/ia64/hp/sim/boot/fw-emu.c
The sizeof a pointer is constant, we want the sizeof what is pointed to.
Zero out 'sizeof(*efi_systab)' bytes of the efi_system_table_t pointer
'efi_systab' instead.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 13:27:18 -08:00
Tony Luck e3ad42be1e [IA64] Fix perfmon sysctl directory modes
New sanity checks in sysctl_check_table() complain about a couple
of mode 0755 that should be 0555 in the perfmon code:

sysctl table check failed: /kernel .1 Writable sysctl directory
sysctl table check failed: /kernel/perfmon  Writable sysctl directory

Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06 13:20:43 -08:00
Kenji Kaneshige 3aff03739c [IA64] Fix incorrect return value from ia64_setup_msi_irq()
Fix the problem that pci_enable_msi() fails on ia64 platform. The cause of
this problem is incorrect return value of ia64_setup_msi_irq(). It must
return 0 on success, instead of irq number.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-30 09:54:47 -07:00
Roel Kluin 41f667f213 [IA64] arch/ia64/sn/kernel/mca.c: undo lock when sn_oemdata can't be extended
Clean up locking state in failure path.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 14:32:30 -07:00
Jes Sorensen 346f3799c7 [IA64] update sn2 defconfig to 64kb pages
Update sn2_defconfig to select 64KB page size, as well as include new
config options.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 11:32:42 -07:00
Alex Chiang 113134fcbc [IA64] /proc/cpuinfo "physical id" field cleanups
Clean up the process for presenting the "physical id" field in
/proc/cpuinfo.

	- remove global smp_num_cpucores, as it is mostly useless

	- remove check_for_logical_procs(), since we do the same
	  functionality in identify_siblings()

	- reflow logic in identify_siblings(). If an older CPU
	  does not implement PAL_LOGICAL_TO_PHYSICAL, we may still
	  be able to get useful information from SAL_PHYSICAL_ID_INFO

	- in identify_siblings(), threads/cores are a property of
	  the CPU, not the platform

	- remove useless printk's about multi-core / thread
	  capability in identify_siblings(), as that information
	  is readily available in /proc/cpuinfo, and printing for
	  the BSP only adds little value

	- smp_num_siblings is now meaningful if any CPU in the
	  system supports threads, not just the BSP

	- expose "physical id" field, even on CPUs that are not
	  multi-core / multi-threaded (as long as we have a valid
	  value). Now we know what sockets Madisons live in too.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 11:14:54 -07:00
Roland McGrath 172c510684 [IA64] vDSO vs --build-id
When gcc uses --build-id by default, the gate.lds.S linker script runs afoul
of the new note section and produces a bad DSO image.  This fixes it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 10:54:33 -07:00
Roland McGrath d650c37b2f [IA64] check-segrel.lds vs --build-id
Some versions of ld with --build-id support will crash when using the flag
with a linker script that discards notes.  This bites ia64's check-segrel.lds.
The bug is easy to avoid.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 10:53:04 -07:00
Simon Horman 1775fe8516 [IA64] vmcore_find_descriptor_size should be in __init
vmcore_find_descriptor_size() is only called by
reserve_elfcorehdr(), which is in __init, so it seems to me that
vmcore_find_descriptor_size() should be there too.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 10:43:29 -07:00
Adrian Bunk 18b8befd37 [IA64] ia64/mm/init.c: fix section mismatches
This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0x5b5c2): Section mismatch: reference to .init.text:memmap_init_zone (between 'memmap_init' and 'virtual_memmap_init')
WARNING: vmlinux.o(.text+0x5b842): Section mismatch: reference to .init.text:memmap_init_zone (between 'virtual_memmap_init' and 'ia64_mmu_init')
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 10:42:35 -07:00