Commit Graph

71 Commits

Author SHA1 Message Date
Michael S. Tsirkin 2d61ba9503 virtio: order used ring after used index read
On SMP guests, reads from the ring might bypass used index reads. This
causes guest crashes because host writes to used index to signal ring
data readiness.  Fix this by inserting rmb before used ring reads.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2009-10-29 08:50:37 +10:30
Michael S. Tsirkin 0b22bd0ba0 virtio-pci: fix per-vq MSI-X request logic
Commit f68d24082e
in 2.6.32-rc1 broke requesting IRQs for per-VQ MSI-X vectors:
- vector number was used instead of the vector itself
- we try to request an IRQ for VQ which does not
  have a callback handler

This is a regression that causes warnings in kernel log,
potentially lower performance as we need to scan vq list,
and might cause system failure if the interrupt
requested is in fact needed by another system.

This was not noticed earlier because in most cases
we were falling back on shared interrupt for all vqs.

The warnings often look like this:

virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
IRQ handler type mismatch for IRQ 1
current handler: i8042
Pid: 2400, comm: modprobe Tainted: G        W
2.6.32-rc3-11952-gf3ed8d8-dirty #1
Call Trace:
 [<ffffffff81072aed>] ? __setup_irq+0x299/0x304
 [<ffffffff81072ff3>] ? request_threaded_irq+0x144/0x1c1
 [<ffffffff813455af>] ? vring_interrupt+0x0/0x30
 [<ffffffff81346598>] ? vp_try_to_find_vqs+0x583/0x5c7
 [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net]
 [<ffffffff81346609>] ? vp_find_vqs+0x2d/0x83
 [<ffffffff81345d00>] ? vp_get+0x3c/0x4e
 [<ffffffffa0016373>] ? virtnet_probe+0x2f1/0x428 [virtio_net]
 [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net]
 [<ffffffffa00150d8>] ? skb_xmit_done+0x0/0x39 [virtio_net]
 [<ffffffff8110ab92>] ? sysfs_do_create_link+0xcb/0x116
 [<ffffffff81345cc2>] ? vp_get_status+0x14/0x16
 [<ffffffff81345464>] ? virtio_dev_probe+0xa9/0xc8
 [<ffffffff8122b11c>] ? driver_probe_device+0x8d/0x128
 [<ffffffff8122b206>] ? __driver_attach+0x4f/0x6f
 [<ffffffff8122b1b7>] ? __driver_attach+0x0/0x6f
 [<ffffffff8122a9f9>] ? bus_for_each_dev+0x43/0x74
 [<ffffffff8122a374>] ? bus_add_driver+0xea/0x22d
 [<ffffffff8122b4a3>] ? driver_register+0xa7/0x111
 [<ffffffffa001a000>] ? init+0x0/0xc [virtio_net]
 [<ffffffff81009051>] ? do_one_initcall+0x50/0x148
 [<ffffffff8106e117>] ? sys_init_module+0xc5/0x21a
 [<ffffffff8100af02>] ? system_call_fastpath+0x16/0x1b
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-29 08:50:36 +10:30
Uwe Kleine-König 1e65175c2c move virtballoon_remove to .devexit.text
The function virtballoon_remove is used only wrapped by __devexit_p so
define it using __devexit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-22 16:39:31 +10:30
Christian Borntraeger e95646c3ec virtio: let header files include virtio_ids.h
Rusty,

commit 3ca4f5ca73
    virtio: add virtio IDs file
moved all device IDs into a single file. While the change itself is
a very good one, it can break userspace applications. For example
if a userspace tool wanted to get the ID of virtio_net it used to
include virtio_net.h. This does no longer work, since virtio_net.h
does not include virtio_ids.h.
This patch moves all "#include <linux/virtio_ids.h>" from the C
files into the header files, making the header files compatible with
the old ones.

In addition, this patch exports virtio_ids.h to userspace.

CC: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-22 16:39:28 +10:30
Fernando Luis Vazquez Cao 3ca4f5ca73 virtio: add virtio IDs file
Virtio IDs are spread all over the tree which makes assigning new IDs
bothersome. Putting them together should make the process less error-prone.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-23 22:26:32 +09:30
Rusty Russell 3c1b27d504 virtio: make add_buf return capacity remaining
This API change means that virtio_net can tell how much capacity
remains for buffers.  It's necessarily fuzzy, since
VIRTIO_RING_F_INDIRECT_DESC means we can fit any number of descriptors
in one, *if* we can kmalloc.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dinesh Subhraveti <dineshs@us.ibm.com>
2009-09-23 22:26:31 +09:30
Rusty Russell f68d24082e virtio_pci: minor MSI-X cleanups
1) Rename vp_request_vectors to vp_request_msix_vectors, and take
   non-MSI-X case out to caller.
2) Comment weird pci_enable_msix API
3) Rename vp_find_vq to setup_vq.
4) Fix spaces to tabs
5) Make nvectors calc internal to vp_try_to_find_vqs()
6) Rename vector to msix_vector for more clarity.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
2009-09-23 22:26:31 +09:30
Michael S. Tsirkin e969fed542 virtio: refactor find_vqs
This refactors find_vqs, making it more readable and robust, and fixing
two regressions from 2.6.30:
- double free_irq causing BUG_ON on device removal
- probe failure when vq can't be assigned to msi-x vector
  (reported on old host kernels)

Tested-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-30 16:03:45 +09:30
Michael S. Tsirkin f6c8250703 virtio: delete vq from list
This makes delete vq the reverse of find vq.
This is required to make it possible to retry find_vqs
after a failure, otherwise the list gets corrupted.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-30 16:03:44 +09:30
Michael S. Tsirkin ff52c3fc71 virtio: fix memory leak on device removal
Make vp_free_vectors do the reverse of vq_request_vectors.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-30 16:03:44 +09:30
Mark McLoughlin 4b892e6582 virtio-pci: correctly unregister root device on error
If pci_register_driver() fails we're incorrectly unregistering the root
device with device_unregister() rather than root_device_unregister().

Reported-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-17 21:47:47 +09:30
Christian Borntraeger e335385373 virtio: enhance id_matching for virtio drivers
This patch allows a virtio driver to use VIRTIO_DEV_ANY_ID for the
device id. This will be used by a test module that can be bound to
any virtio device.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:40 +09:30
Christian Borntraeger c89e80168b virtio: fix id_matching for virtio drivers
This bug never appeared, since all current virtio drivers use
VIRTIO_DEV_ANY_ID for the vendor field. If a real vendor would be used,
the check in virtio_id_match is wrong - it returns 0 if
id->vendor == dev->id.vendor.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:40 +09:30
Mark McLoughlin 9fa29b9df3 virtio: indirect ring entries (VIRTIO_RING_F_INDIRECT_DESC)
Add a new feature flag for indirect ring entries. These are ring
entries which point to a table of buffer descriptors.

The idea here is to increase the ring capacity by allowing a larger
effective ring size whereby the ring size dictates the number of
requests that may be outstanding, rather than the size of those
requests.

This should be most effective in the case of block I/O where we can
potentially benefit by concurrently dispatching a large number of
large requests. Even in the simple case of single segment block
requests, this results in a threefold increase in ring capacity.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:39 +09:30
Rusty Russell a92892825a virtio: expose features in sysfs
Each device negotiates feature bits; expose these in sysfs to help
diagnostics and debugging.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:38 +09:30
Michael S. Tsirkin 82af8ce84e virtio_pci: optional MSI-X support
This implements optional MSI-X support in virtio_pci.
MSI-X is used whenever the host supports at least 2 MSI-X
vectors: 1 for configuration changes and 1 for virtqueues.
Per-virtqueue vectors are allocated if enough vectors
available.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ whitespace, style)
2009-06-12 22:16:37 +09:30
Michael S. Tsirkin 77cf524654 virtio_pci: split up vp_interrupt
This reorganizes virtio-pci code in vp_interrupt slightly, so that
it's easier to add per-vq MSI support on top.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:37 +09:30
Michael S. Tsirkin d2a7ddda9f virtio: find_vqs/del_vqs virtio operations
This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations,
and updates all drivers. This is needed for MSI support, because MSI
needs to know the total number of vectors upfront.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)
2009-06-12 22:16:36 +09:30
Rusty Russell 9499f5e7ed virtio: add names to virtqueue struct, mapping from devices to queues.
Add a linked list of all virtqueues for a virtio device: this helps for
debugging and is also needed for upcoming interface change.

Also, add a "name" field for clearer debug messages.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:36 +09:30
Rusty Russell ef688e151c virtio: meet virtio spec by finalizing features before using device
Virtio devices are supposed to negotiate features before they start using
the device, but the current code doesn't do this.  This is because the
driver's probe() function invariably has to add buffers to a virtqueue,
or probe the disk (virtio_blk).

This currently doesn't matter since no existing backend is strict about
the feature negotiation.  But it's possible to imagine a future feature
which completely changes how a device operates: in this case, we'd need
to acknowledge it before using the device.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:35 +09:30
Marcelo Tosatti 84a139a985 virtio: fix suspend when using virtio_balloon
Break out of wait_event_interruptible() if freezing has been requested,
in the vballoon thread. Without this change vballoon refuses to stop and
the system can't suspend.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2009-04-19 23:14:01 +09:30
Rusty Russell c5f841f178 virtio: more neatening of virtio_ring macros.
Impact: cleanup

Roel Kluin drew attention to these macros with his patch: here I
neaten them a little further:
1) Add a comment on what START_USE and END_USE are checking,
2) Brackets around _vq in BAD_RING,
3) Neaten formatting for START_USE so it's less than 80 cols.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 21:55:23 +10:30
Roel Kluin 3a35ce7dce virtio: fix BAD_RING, START_US and END_USE macros
Impact: cleanup

fix BAD_RING, START_US and END_USE macros

When these macros aren't called with a variable named vq as first
argument, this would result in a build failure.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 21:55:22 +10:30
Mark McLoughlin 3fff0179e3 virtio-pci: do not oops on config change if driver not loaded
The host really shouldn't be notifying us of config changes
before the device status is VIRTIO_CONFIG_S_DRIVER or
VIRTIO_CONFIG_S_DRIVER_OK.

However, if we do happen to be interrupted while we're not
attached to a driver, we really shouldn't oops. Prevent
this simply by checking that device->driver is non-NULL
before trying to notify the driver of config changes.

Problem observed by doing a "set_link virtio.0 down" with
QEMU before the net driver had been loaded.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-02 19:17:56 -08:00
Mark McLoughlin 63d1255670 virtio: do not statically allocate root device
We shouldn't be statically allocating the root device object,
so dynamically allocate it using root_device_register()
instead.

Also avoids this warning from 'rmmod virtio_pci':

  Device 'virtio-pci' does not have a release() function, it is broken and must be fixed

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:34 -08:00
Mark McLoughlin 29f9f12ec7 virtio: add PCI device release() function
Add a release() function for virtio_pci devices so as to avoid:

  Device 'virtio0' does not have a release() function, it is broken and must be fixed

Move the code to free the resources associated with the device
from virtio_pci_remove() into this new function. virtio_pci_remove()
now merely unregisters the device which should cause the final
ref to be dropped and virtio_pci_release_dev() to be called.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:26:10 +10:30
Hollis Blanchard 1b4aa2faec virtio: avoid implicit use of Linux page size in balloon interface
Make the balloon interface always use 4K pages, and convert Linux pfns if
necessary. This patch assumes that Linux's PAGE_SHIFT will never be less than
12.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (modified)
2008-12-30 09:26:04 +10:30
Rusty Russell 87c7d57c17 virtio: hand virtio ring alignment as argument to vring_new_virtqueue
This allows each virtio user to hand in the alignment appropriate to
their virtio_ring structures.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-12-30 09:26:03 +10:30
Rusty Russell 498af14783 virtio: Don't use PAGE_SIZE for vring alignment in virtio_pci.
That doesn't work for non-4k guests which are now appearing.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:25:58 +10:30
Rusty Russell 480daab42c virtio: Don't use PAGE_SIZE in virtio_pci.c
The virtio PCI devices don't depend on the guest page size.  This matters
now PowerPC virtio is gaining ground (they like 64k pages).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:25:57 +10:30
Kay Sievers 99e0b6c8e3 virtio: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:25:56 +10:30
Hollis Blanchard 13b1eb333b virtio-pci queue allocation not page-aligned
kzalloc() does not guarantee page alignment, and in fact this broke when
I enabled CONFIG_SLUB_DEBUG_ON.

(Thanks to Anthony Liguori for spotting the missing kfree sub)

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed kfree)
Tested-by: Anthony Liguori <aliguori@us.ibm.com>
2008-12-30 09:25:56 +10:30
Anthony Liguori 532a6086e3 virtio_balloon: fix towards_target when deflating balloon
Both v and vb->num_pages are u32 and unsigned int respectively.  If v is less
than vb->num_pages (and it is, when deflating the balloon), the result is a
very large 32-bit number.  Since we're returning a s64, instead of getting the
same negative number we desire, we get a very large positive number.

This handles the case where v < vb->num_pages and ensures we get a small,
negative, s64 as the result.

Rusty: please push this for 2.6.27-rc4.  It's probably appropriate for the
stable tree too as it will cause an unexpected OOM when ballooning.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (simplified)
2008-08-26 00:19:25 +10:00
Rusty Russell e34f872567 virtio: Add transport feature handling stub for virtio_ring.
To prepare for virtio_ring transport feature bits, hook in a call in
all the users to manipulate them.  This currently just clears all the
bits, since it doesn't understand any features.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:14 +10:00
Rusty Russell c624896e48 virtio: Rename set_features to finalize_features
Rather than explicitly handing the features to the lower-level, we just
hand the virtio_device and have it set the features.  This make it clear
that it has the chance to manipulate the features of the device at this
point (and that all feature negotiation is already done).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:12 +10:00
Rusty Russell dd7c7bc462 virtio: Formally reserve bits 28-31 to be 'transport' features.
We assign feature bits as required, but it makes sense to reserve some
for the particular transport, rather than the particular device.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:07 +10:00
Mark McLoughlin e962fa660d virtio: Use bus_type probe and remove methods
Hook up to the probe() and remove() methods in bus_type
rather than device_driver. The latter has been preferred
since 2.6.16.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:05 +10:00
Rusty Russell 44653eae14 virtio: don't always force a notification when ring is full
We force notification when the ring is full, even if the host has
indicated it doesn't want to know.  This seemed like a good idea at
the time: if we fill the transmit ring, we should tell the host
immediately.

Unfortunately this logic also applies to the receiving ring, which is
refilled constantly.  We should introduce real notification thesholds
to replace this logic.  Meanwhile, removing the logic altogether breaks
the heuristics which KVM uses, so we use a hack: only notify if there are
outgoing parts of the new buffer.

Here are the number of exits with lguest's crappy network implementation:
Before:
	network xmit 7859051 recv 236420
After:
	network xmit 7858610 recv 118136

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:04 +10:00
Mark McLoughlin b92dea67cc virtio: Complete feature negotation before updating status
lguest (in rusty's use-tun-ringfd patch) assumes that the
guest has updated its feature bits before setting its status
to VIRTIO_CONFIG_S_DRIVER_OK.

That's pretty reasonable, so let's make it so.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-15 13:46:16 -07:00
Rusty Russell b4f68be6c5 virtio: force callback on empty.
virtio allows drivers to suppress callbacks (ie. interrupts) for
efficiency (no locking, it's just an optimization).

There's a similar mechanism for the host to suppress notifications
coming from the guest: in that case, we ignore the suppression if the
ring is completely full.

It turns out that life is simpler if the host similarly ignores
callback suppression when the ring is completely empty: the network
driver wants to free up old packets in a timely manner, and otherwise
has to use a timer to poll.

We have to remove the code which ignores interrupts when the driver
has disabled them (again, it had no locking and hence was unreliable
anyway).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-30 15:09:46 +10:00
Christian Borntraeger 52a3a05f3a virtio_net: another race with virtio_net and enable_cb
Hello Rusty,

seems that we still have a problem with virtio_net and the enable_cb callback.
During a long running network stress tests with virtio and got the following
oops:

------------[ cut here ]------------
kernel BUG at drivers/virtio/virtio_ring.c:230!
illegal operation: 0001 [#1] SMP
Modules linked in:
CPU: 0 Not tainted 2.6.26-rc2-kvm-00436-gc94c08b-dirty #34
Process netserver (pid: 2582, task: 000000000fbc4c68, ksp: 000000000f42b990)
Krnl PSW : 0704c00180000000 00000000002d0ec8 (vring_enable_cb+0x1c/0x60)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS: 0000000000000000 0000000000000000 000000000ef3d000 0000000010009800
           0000000000000000 0000000000419ce0 0000000000000080 000000000000007b
           000000000adb5538 000000000ef40900 000000000ef40000 000000000ef40920
           0000000000000000 0000000000000005 000000000029c1b0 000000000fea7d18
Krnl Code: 00000000002d0ebc: a7110001           tmll    %r1,1
           00000000002d0ec0: a7740004           brc     7,2d0ec8
           00000000002d0ec4: a7f40001           brc     15,2d0ec6
          >00000000002d0ec8: a517fffe           nill    %r1,65534
           00000000002d0ecc: 40103000           sth     %r1,0(%r3)
           00000000002d0ed0: 07f0               bcr     15,%r0
           00000000002d0ed2: e31020380004       lg      %r1,56(%r2)
           00000000002d0ed8: a7480000           lhi     %r4,0
Call Trace:
([<000000000029c0fc>] virtnet_poll+0x290/0x3b8)
 [<0000000000333fb8>] net_rx_action+0x9c/0x1b8
 [<00000000001394bc>] __do_softirq+0x74/0x108
 [<000000000010d16a>] do_softirq+0x92/0xac
 [<0000000000139826>] irq_exit+0x72/0xc8
 [<000000000010a7b6>] do_extint+0xe2/0x104
 [<0000000000110508>] ext_no_vtime+0x16/0x1a
Last Breaking-Event-Address:
 [<00000000002d0ec4>] vring_enable_cb+0x18/0x60

I looked into the virtio_net code for some time and I think the following
scenario happened. Please look at virtnet_poll:
[...]
        /* Out of packets? */
        if (received < budget) {
                netif_rx_complete(vi->dev, napi);
                if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq))
                    && napi_schedule_prep(napi)) {
                        vi->rvq->vq_ops->disable_cb(vi->rvq);
                        __netif_rx_schedule(vi->dev, napi);
                        goto again;
                }
        }

If an interrupt arrives after netif_rx_complete, a second poll routine can run
on a different cpu. The second check for napi_schedule_prep would prevent any
harm in the network stack, but we have called enable_cb possibly after the
disable_cb in skb_recv_done.

static void skb_recv_done(struct virtqueue *rvq)
{
        struct virtnet_info *vi = rvq->vdev->priv;
        /* Schedule NAPI, Suppress further interrupts if successful. */
        if (netif_rx_schedule_prep(vi->dev, &vi->napi)) {
                rvq->vq_ops->disable_cb(rvq);
                __netif_rx_schedule(vi->dev, &vi->napi);
        }
}

That means that the second poll routine runs with interrupts enabled, which is
ok, since we can handle additional interrupts. The problem is now that the
second poll routine might also call enable_cb, triggering the BUG.

The only solution I can come up with, is to remove the BUG statement in
enable_cb - similar to disable_cb. Opinions or better ideas where the oops
could come from?

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-30 15:09:45 +10:00
Rusty Russell b769f57908 virtio: set device index in common code.
Anthony Liguori points out that three different transports use the virtio code,
but each one keeps its own counter to set the virtio_device's index field.  In
theory (though not in current practice) this means that names could be
duplicated, and that risk grows as more transports are created.

So we move the selection of the unique virtio_device.index into the common code
in virtio.c, which has the side-benefit of removing duplicate code.

The only complexity is that lguest and S/390 use the index to uniquely identify
the device in case of catastrophic failure before register_virtio_device() is
called: now we use the offset within the descriptor page as a unique identifier
for the printks.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2008-05-30 15:09:42 +10:00
Rusty Russell 5610bd1524 virtio: virtio_pci should not set bus_id.
The common virtio code sets the bus_id, overriding anything virtio_pci
sets anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2008-05-30 15:09:42 +10:00
Rusty Russell 2ad3cfbac5 virtio: bus_id for devices should contain 'virtio'
Chris Lalancette <clalance@redhat.com> points out that virtio.c sets all device
names to '0', '1', etc, which looks silly in /proc/interrupts.  We change this
from '%d' to 'virtio%d'.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2008-05-30 15:09:42 +10:00
Rusty Russell c45a6816c1 virtio: explicit advertisement of driver features
A recent proposed feature addition to the virtio block driver revealed
some flaws in the API: in particular, we assume that feature
negotiation is complete once a driver's probe function returns.

There is nothing in the API to require this, however, and even I
didn't notice when it was violated.

So instead, we require the driver to specify what features it supports
in a table, we can then move the feature negotiation into the virtio
core.  The intersection of device and driver features are presented in
a new 'features' bitmap in the struct virtio_device.

Note that this highlights the difference between Linux unsigned-long
bitmaps where each unsigned long is in native endian, and a
straight-forward little-endian array of bytes.

Drivers can still remove feature bits in their probe routine if they
really have to.

API changes:
- dev->config->feature() no longer gets and acks a feature.
- drivers should advertise their features in the 'feature_table' field
- use virtio_has_feature() for extra sanity when checking feature bits

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:50 +10:00
Rusty Russell 72e61eb40b virtio: change config to guest endian.
A recent proposed feature addition to the virtio block driver revealed
some flaws in the API, in particular how easy it is to break big
endian machines.

The virtio config space was originally chosen to be little-endian,
because we thought the config might be part of the PCI config space
for virtio_pci.  It's actually a separate mmio region, so that
argument holds little water; as only x86 is currently using the virtio
mechanism, we can change this (but must do so now, before the
impending s390 merge).

API changes:
- __virtio_config_val() just becomes a striaght vdev->config_get() call.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:50 +10:00
Harvey Harrison 597d56e4b5 virtio: fix sparse return void-valued expression warnings
drivers/virtio/virtio_pci.c:148:2: warning: returning void-valued expression
drivers/virtio/virtio_pci.c:155:2: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:44 +10:00
Rusty Russell 5ef827526f virtio: ignore corrupted virtqueues rather than spinning.
A corrupt virtqueue (caused by the other end screwing up) can have
strange results such as a driver spinning: just bail when we try to
get a buffer from a known-broken queue.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:43 +10:00
Rusty Russell 2557a933b7 virtio: remove overzealous BUG_ON.
The 'disable_cb' callback is designed as an optimization to tell the host
we don't need callbacks now.  As it is not reliable, the debug check is
overzealous: it can happen on two CPUs at the same time.  Document this.

Even if it were reliable, the virtio_net driver doesn't disable
callbacks on transmit so the START_USE/END_USE debugging reentrance
protection can be easily tripped even on UP.

Thanks to Balaji Rao for the bug report and testing.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 13:14:22 -07:00
Al Viro 97968358ab virtio_pci iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30 14:20:23 -07:00