Commit Graph

763 Commits

Author SHA1 Message Date
Linus Torvalds 2f78d8e249 IEEE 1394 (FireWire) subsystem updates post v3.4:
- Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization
     direction (was correct) of isochronous reception buffers of userspace drivers
     if vma-mapped for R/W access.  For example, libdc1394 was affected.
 
   - more consistent retry stategy in device discovery/ rediscovery, and improved
     failure diagnostics
 
   - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvoOWAAoJEHnzb7JUXXnQpG4P/j4u9kU+MDegDrRsAzZBdP+6
 in2FW8opUzSXZyLSzU/JYcO7P0luEEdLIE65fkaVRbP1x6m7aAjgaAO/0zbqZQPD
 QVyIAOPa8zcbEIi1cEnI75KU/AMyQpMk/eU9Et4FrbQszgyFvJNe+hS+MocMooPt
 vukqmWJuIPfH/G3FsX0eQWEXS7GktkYxmLJM/k6z4JpngAVmelM/Ce45VFg7tbN+
 IeV5N7+FF4zKmwgiKIpkw5tSO6If7mjoQQVH/Q8DiHJDhFlDUrKR9/TvaJesVtEg
 5n97BbfvXc8mu6EE8lbl1ats2R1I00JDpMylHPt4J6G1XDjb1/GvqSjXYXwPT77J
 O4xZwqT4C5JKnG9h2a4npf6PgDHBbMnUK9cDBxfA5ZPkTeZmGXWuP05zYJqeNJm9
 UrEusEjzEEspVWFqxOD+2/YLF/0rxqA/P1C7Luuw7Y9nIcCt3VskuW6iebYuf5Dk
 yNoykYVph8zDJE+Am7jtsgNCPfd4TomFttjMcc/0EVqNa1iVO/AuLlvYv+Ab75oU
 BpOUEg8Pq9nQeya3XjM585R0rF4PG5wsVrBe2ZzJ+cqNe6JH264/YuBgFv1bkUg3
 UtHNIG633KAk71P1jl7PeuvAQksLnCYak2JOviZ/oB79Yamoxifhcm4mNkwTeCv7
 paRqDNAzoaThqvqx723E
 =fulr
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter:

 - Fix mismatch between DMA mapping direction (was wrong) and DMA
   synchronization direction (was correct) of isochronous reception
   buffers of userspace drivers if vma-mapped for R/W access.  For
   example, libdc1394 was affected.

 - more consistent retry stategy in device discovery/ rediscovery, and
   improved failure diagnostics

 - various small cleanups, e.g. use SCSI layer's DMA mapping API in
   firewire-sbp2

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: sbp2: document the absence of alignment requirements
  firewire: sbp2: remove superfluous blk_queue_max_segment_size() call
  firewire: sbp2: use scsi_dma_(un)map
  firewire: sbp2: give correct DMA device to scsi framework
  firewire: core: fw_device_refresh(): clean up error handling
  firewire: core: log config rom reading errors
  firewire: core: log error in case of failed bus manager lock
  firewire: move rcode_string() to core
  firewire: core: improve reread_config_rom() interface
  firewire: core: wait for inaccessible devices after bus reset
  firewire: ohci: omit spinlock IRQ flags where possible
  firewire: ohci: correct signedness of a local variable
  firewire: core: fix DMA mapping direction
  firewire: use module_pci_driver
2012-05-24 12:57:47 -07:00
Clemens Ladisch 26c72e22c9 firewire: sbp2: document the absence of alignment requirements
The SBP-2/3 specifications do not require any alignment of data
buffers; only their own data structures need to be quadlet-aligned
[SR: or octlet-aligned].

Fix the comments to reflect this, but leave the actual alignment at
32 bits to avoid theoretical problems with target implementations
that might handle this incorrectly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:49:44 +02:00
Clemens Ladisch 935f672e02 firewire: sbp2: remove superfluous blk_queue_max_segment_size() call
The SCSI framework automatically initializes the block queue's segment
size with the DMA device's segment size.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Clemens Ladisch f203022353 firewire: sbp2: use scsi_dma_(un)map
Use the scsi_dma_map/scsi_dma_unmap helper to simplify the code
a little.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Clemens Ladisch 473ffe6560 firewire: sbp2: give correct DMA device to scsi framework
The sbp2 driver does DMA not on the unit but on the card device.

The driver worked even with the wrong device because at the moment, it
happens to reimplement the DMA functions of the SCSI framework.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Chris Boot fc5f80b152 firewire: Move fw_card kref functions into linux/firewire.h
When writing a firewire driver that doesn't deal with struct fw_device
objects (e.g. it only publishes FireWire units and doesn't subscribe to
them), you likely need to keep referenced to struct fw_card objects so
that you can send messages to other nodes. This patch moves
fw_card_put(), fw_card_get() and fw_card_release() into the public
include/linux/firewire.h header instead of drivers/firewire/core.h, and
adds EXPORT_SYMBOL_GPL(fw_card_release).

The firewire-sbp-target module requires these so it can keep a reference
to the fw_card object in order that it can fetch ORBs to execute and
read/write related data and status information.

Signed-off-by: Chris Boot <bootc@bootc.net>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:25:17 -07:00
Chris Boot 253d92371c firewire: Add function to get speed from opaque struct fw_request
Sometimes it's useful to know the FireWire speed of the request that has
just come in to a fw_address_handler callback. As struct fw_request is
opaque we can't peek inside to get the speed out of the struct fw_packet
that's just inside. For example, the SBP-2 spec says:

"The speed at which the block write request to the MANAGEMENT_AGENT
register is received shall determine the speed used by the target for
all subsequent requests to read the initiator’s configuration ROM, fetch
ORB’s from initiator memory or store status at the initiator’s
status_FIFO. Command block ORB’s separately specify the speed for
requests addressed to the data buffer or page table."

[ ANSI T10/1155D Revision 4 page 53/54 ]

Signed-off-by: Chris Boot <bootc@bootc.net>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:25:17 -07:00
Clemens Ladisch 8527f8e293 firewire: core: fw_device_refresh(): clean up error handling
In fw_device_init() and fw_device_refresh(), if a call to
read_cofig_rom() fails, the operation is retried a few times, with
these retries being controlled by the MAX_RETRIES and RETRY_DELAY
symbols.

fw_device_refresh() also reads part of the config rom by calling
reread_config_rom().  Any errors from this call resulted in retries
with MAX_RETRIES/2 and RETRY_DELAY/2.

There is no reason to require that a device that has initiated a bus
reset must react faster to read requests than a device that has just
been plugged in.  Furthermore, if the config rom has changed, any
errors from the following read_config_rom() call are then handled
with the normal retry count and delay.

Remove this inconsistency by always using the normal retry count and
delay.  (This also makes the two error handlers identical and allows
merging them.)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:57:10 +02:00
Clemens Ladisch 94fba9fbea firewire: core: log config rom reading errors
If reading or refreshing a config rom fails, also log the actual error
that caused it to fail.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:57:02 +02:00
Clemens Ladisch 3b00b00888 firewire: core: log error in case of failed bus manager lock
If the lock access to the bus manager register fails, also log the
actual error that caused it to fail.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:56:53 +02:00
Clemens Ladisch 7bdbff6762 firewire: move rcode_string() to core
There is nothing audio-specific about the rcode_string() helper, so move
it from snd-firewire-lib into firewire-core to allow other code to use it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed sound/firewire/cmp.c)
2012-04-17 22:54:55 +02:00
Clemens Ladisch db7494e2ce firewire: core: improve reread_config_rom() interface
The return value of reread_config_rom() was a mixture of two pieces of
information: whether the function succeeded, and whether the config rom
had changed.

To clarify the semantics, and to allow returning the actual error code,
split the second information into a new output parameter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:27:37 +02:00
Clemens Ladisch d33ec3b55e firewire: core: wait for inaccessible devices after bus reset
When reread_config_rom() encountered a config rom that was marked as not
yet accessible, that device would be treated as "gone".  This would mean
that that device would effectively vanish until the next bus reset.

The correct way to handle this situation is the same as in
read_config_rom(), to treat this like other errors and to retry the read
later, when the (possibly changed) config rom is available.  The device
is marked "gone" only if it continues to return zero values after these
retries.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:27:37 +02:00
Stefan Richter 8a8c47364e firewire: ohci: omit spinlock IRQ flags where possible
bus_reset_work() is only called from workqueue thread context.

ohci_set_config_rom() and ohci_allocate_iso_context() perform GFP_KERNEL
memory allocations, therefore they must be called with interrupts
enabled.

Hence these functions may disable and enable local IRQs without having
to track IRQ state.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:27:37 +02:00
Stefan Richter d713dfa708 firewire: ohci: correct signedness of a local variable
bus_reset_work's reg is a bitfield.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:27:37 +02:00
Stefan Richter 0b6c4857f7 firewire: core: fix DMA mapping direction
Seen with recent libdc1394:  If a client mmap()s the buffer of an
isochronous reception buffer with PROT_READ|PROT_WRITE instead of just
PROT_READ, firewire-core sets the wrong DMA mapping direction during
buffer initialization.

The fix is to split fw_iso_buffer_init() into allocation and DMA mapping
and to perform the latter after both buffer and DMA context were
allocated.  Buffer allocation and context allocation may happen in any
order, but we need the context type (reception or transmission) in order
to set the DMA direction of the buffer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:27:37 +02:00
Axel Lin fe2af11c22 firewire: use module_pci_driver
This patch converts the drivers in drivers/firewire/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-09 14:23:37 +02:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds 34699403e9 IEEE 1394 (FireWire) subsystem updates post v3.3:
- Some SBP-2 initiator fixes, side product from ongoing work on a target.
   - Reintroduction of an isochronous I/O feature of the older ieee1394 driver
     stack (flush buffer completions); it was evidently rarely used but not
     actually unused.  Matching libraw1394 code is already available.
   - Be sure to prefix all kernel log messages with device name or card name,
     and other logging related cleanups.
   - Misc other small cleanups, among them a small API change that affects
     sound/firewire/ too.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJPa5I1AAoJEHnzb7JUXXnQvUoQAMl9PhUk5ZFhWp0AOnQ4uLhI
 lEfRnUp94kGBdazBhxM9wtAwZRAeXUev/JyxwymMKSG40dMTbuxqRcs71v6a+ifd
 VqNctL0yUncrOw/92l+TG2t/hWttB4u+dTKYX2U5yza42+uUHWMZb7MzmV+qVYc8
 H+NR71WLQM4wkWdX8LBxmdeAOm0X635cjKsC/5FX9dws7q1ebSoxs4q4iIaGR7W8
 ETWx5lh/UVyR7c9T+VIr0jfQWdsm2IcmHr/+nldlesePZ1gRjIEi69ErEnGxTkGe
 NLPwt9lWuFXgWWHBON7C/rLmBA+NSys9lbvRAsPXrb3GpOKlde81c7U7Kr/kmEkh
 hB9oM2Qh0A/7sglvIZiDUP565lqOAbXSJzziG3+0XgOP2zsxukm5gSecF8qM8tHY
 IDwN05R9+nc26NA5TOfaRWx08n9SqTxq4V326oz9WMuK4bosCEfg4dvMwyMK/V3i
 AyipAl2YYIG/2JURMFcGSKbw33dBw3mRsS8XG3MXwzagUMw/8tSyZKQIwF9qO4si
 69QV7+CJoEfbJiLJMZJnKrRjfU+ZVRNA/xFuHUmhpmvYIbN8iJVGpGZABfXBUcH0
 c1+qX9zE4NEAUEylbgn5raYSY6otF51O8QJzQOn2HRddBQSDpEwhkOGVfZ7zcSLH
 sjAOn9qLIMHnrxUXxBDP
 =oWbr
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter:

 - Some SBP-2 initiator fixes, side product from ongoing work on a target.

 - Reintroduction of an isochronous I/O feature of the older ieee1394 driver
   stack (flush buffer completions); it was evidently rarely used but not
   actually unused.  Matching libraw1394 code is already available.

 - Be sure to prefix all kernel log messages with device name or card name,
   and other logging related cleanups.

 - Misc other small cleanups, among them a small API change that affects
   sound/firewire/ too. Clemens Ladisch is aware of it.

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits)
  firewire: allow explicit flushing of iso packet completions
  firewire: prevent dropping of completed iso packet header data
  firewire: ohci: factor out iso completion flushing code
  firewire: ohci: simplify iso header pointer arithmetic
  firewire: ohci: optimize control bit checks
  firewire: ohci: remove unused excess_bytes field
  firewire: ohci: copy_iso_headers(): make comment match the code
  firewire: cdev: fix IR multichannel event documentation
  firewire: ohci: fix too-early completion of IR multichannel buffers
  firewire: ohci: move runtime debug facility out of #ifdef
  firewire: tone down some diagnostic log messages
  firewire: sbp2: replace a GFP_ATOMIC allocation
  firewire: sbp2: Fix SCSI sense data mangling
  firewire: sbp2: Ignore SBP-2 targets on the local node
  firewire: sbp2: Take into account Unit_Unique_ID
  firewire: nosy: Use the macro DMA_BIT_MASK().
  firewire: core: convert AR-req handler lock from _irqsave to _bh
  firewire: core: fix race at address_handler unregistration
  firewire: core: remove obsolete comment
  firewire: core: prefix log messages with card name
  ...
2012-03-22 20:31:15 -07:00
Clemens Ladisch d1bbd20972 firewire: allow explicit flushing of iso packet completions
Extend the kernel and userspace APIs to allow reporting all currently
completed isochronous packets, even if the next interrupt packet has not
yet been reached.  This is required to determine the status of the
packets at the end of a paused or stopped stream, and useful for more
precise synchronization of audio streams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch 18d627113b firewire: prevent dropping of completed iso packet header data
The buffer for the header data of completed iso packets has a fixed
size, so it is possible to configure a stream with a big interval
between interrupt packets or with big headers so that this buffer would
overflow.  Previously, ohci.c would drop any data that would not fit,
but this could make unsuspecting applications believe that fewer than
the actual number of packets have completed.

Instead of dropping data, add calls to flush_iso_completion() so that
there are as many events as needed to report all of the data.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch 910e76c607 firewire: ohci: factor out iso completion flushing code
In preparation for the following patches that add more flushing, move
the code for flushing accumulated header data into a common function.
The timestamp of the last completed packed is passed through the context
structure instead of a function parameter to allow accessing this value
later outside of the handle_i?_packet functions.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch 73864012f3 firewire: ohci: simplify iso header pointer arithmetic
When storing the header data of completed iso packets, we effectively
treat the buffers as arrays of quadlets.  Actually declaring the
pointers as u32* avoids repetitive pointer arithmetic, removes the
unhelpfully named "i" variables, and thus makes the code clearer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch 90fcc89873 firewire: ohci: optimize control bit checks
Doing the endian conversion on the constant instead of the memory
field allows the compiler to do the conversion at compile time.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch b9b5bbfda6 firewire: ohci: remove unused excess_bytes field
Commit 6498ba04ae (remove unused dualbuffer IR code) overlooked
a field in struct iso_context.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch 32c507f7b7 firewire: ohci: copy_iso_headers(): make comment match the code
The comment incorrectly talked about one little-endian quadlet, while
there are actually two.  Furthermore, the endianness of the remaining
headers depends on whatever protocol is used, so don't mention them.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch 0c0efbacab firewire: ohci: fix too-early completion of IR multichannel buffers
handle_ir_buffer_fill() assumed that a completed descriptor would be
indicated by a non-zero transfer_status (as in most other descriptors).
However, this field is written by the controller as soon as (the end of)
the first packet has been written into the buffer.  As a consequence, if
we happen to run into such a descriptor when the interrupt handler is
executed after such a packet has completed, the descriptor would be
taken out of the list of active descriptors as soon as the buffer had
been partially filled, so the event for the buffer being completely
filled would never be sent.

To fix this, handle descriptors only when they have been completely
filled, i.e., when res_count == 0.  (This also matches the condition
that is reported by the controller with an interrupt.)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-17 11:07:26 +01:00
Stefan Richter cfda62baa4 firewire: ohci: move runtime debug facility out of #ifdef
CONFIG_FIREWIRE_OHCI_DEBUG could have been exposed to kernel tweakers
if CONFIG_EXPERT was set.  But in hindsight, this stuff is far too
useful to omit it.  So get rid of two #else branches that are only
going to bitrot otherwise.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Stefan Richter 98466cc450 firewire: tone down some diagnostic log messages
The "skipped bus generations" message was added together with the
respective fw_device retaining/ reviving code in order to see how it all
works out.  It did well, so don't spam the log anymore.

The "register access failure" situation still needs an actual handler.
But at this point it makes less sense to ask folks to send mails about
it.  We now have a pretty good picture of what controllers emit this and
when:

Texas Instruments PCIxx21 FireWire + CardBus + flash memory card
controller:
https://bugzilla.redhat.com/show_bug.cgi?id=608544

O2 Micro FireWire + flash memory card controller:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/881688
http://marc.info/?l=linux1394-devel&m=132309283531423
http://marc.info/?l=linux1394-devel&m=132368567907469
http://marc.info/?l=linux1394-devel&m=132516165727468
http://marc.info/?l=linux1394-devel&m=133006486927699

Pinnacle Movieboard:
commit 7f7e37115a
http://marc.info/?l=linux1394-devel&m=130714243325962

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Stefan Richter c13ccfcf66 firewire: sbp2: replace a GFP_ATOMIC allocation
sbp2_send_management_orb() is called by sbp2_login, sbp2_reconnect, and
sbp2_remove, all which are able to sleep during memory allocations.
Actually, sbp2_send_management_orb() itself is a sleeping function.

Login and remove could allocate with GFP_KERNEL but reconnect needs
GFP_NOIO to ensure progress in low memory situations.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Chris Boot 6503de6545 firewire: sbp2: Fix SCSI sense data mangling
SCSI sense data in SBP-2/3 is carried in an unusual format that means we
have to un-mangle it on our end before we pass it to the SCSI subsystem.
Currently our un-mangling code doesn't quite follow the SBP-2 standard
in that we always assume Current and never Deferred error types, we
never set the VALID bit, and we mishandle the FILEMARK, EOM and ILI
bits.

This patch fixes the sense un-mangling to correctly handle those and
follow the spec.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:02 +01:00
Chris Boot 74044563a2 firewire: sbp2: Ignore SBP-2 targets on the local node
The firewire-sbp2 module tries to login to an SBP-2/3 target even when
it is running on the local node, which fails because of the inability to
fetch data from DMA mapped regions using firewire transactions on the
local node. It also doesn't make much sense to have the initiator and
target on the same node, so this patch prevents this behaviour.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changed the comment)
2012-02-22 22:36:02 +01:00
Chris Boot 8ff6a75744 firewire: sbp2: Take into account Unit_Unique_ID
If the target's unit directory contains a Unit_Unique_ID entry, we
should use that as the target's GUID for identification purposes. The
SBP-2 standards document says:

"Although the node unique ID (EUI-64) present in the bus information
block is sufficient to uniquely identify nodes attached to Serial Bus,
it is insufficient to identify a target when a vendor implements a
device with multiple Serial Bus node connections. In this case initiator
software requires information by which a particular target may be
uniquely identified, regardless of the Serial Bus access path used."

[ IEEE T10 P1155D Revision 4, Section 7.6 (page 51) ] and
[ IEEE T10 P1467D Revision 5, Section 7.9 (page 74) ]

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
santosh nayak e894d1d7fd firewire: nosy: Use the macro DMA_BIT_MASK().
Use the macro DMA_BIT_MASK instead of the constant  0xffffffff

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter ea102d0ec4 firewire: core: convert AR-req handler lock from _irqsave to _bh
fw_core_handle_request() is called by the low-level driver in tasklet
context or process context, and fw_core_add/remove_address_handler() is
called by mid- or high-level code in process context.  So convert
address_handler_lock accesses from those which disable local IRQs to
ones which just disable local softIRQs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter 90963f1cdb firewire: core: fix race at address_handler unregistration
Fix the following unlikely but possible race:

CPU 1                             CPU 2
------------------------------------------------------------------------
AR-request tasklet
    lookup handler
                                  unregister handler
				  free handler->callback_data or handler
    call handler->callback

The application which registered the handler has no way to stop nodes
sending new requests to their address range, hence cannot prevent this
race.

Fix it simply by extending the address_handler_lock-protected region
from only around the lookup to around both lookup and call.  We only
need to do so in the exclusive region handler; the FCP region handler
already holds the lock around the handler->callback call.

Alas this removes the current ability to execute the callback in
parallel on different CPUs if it was called for different FireWire cards
at the same time.  (For a single card, the handler is already
serialized.)  If this loss of a rather obscure feature is not tolerable,
a more complex fix would be required:  Add a handler reference counter;
wait in fw_core_remove_address_handler() for this conter to become zero.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter 280f64d4f1 firewire: core: remove obsolete comment
Target-like applications or peer-to-peer-like applications require the
global address handler registration which we have right now, or a per-
card registration.  And node lookup, while it would be nice to have,
would be impossible in the brief time between self-ID-complete event and
completion of firewire-core's topology scanning.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter 26b4950de1 firewire: core: prefix log messages with card name
Associate all log messages from firewire-core with the respective card
because some people have more than one card.  E.g.
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core: created device fw0: GUID 0814438400000389, S800
    firewire_core: phy config: new root=ffc1, gap_count=5
    firewire_core: created device fw1: GUID 0814438400000388, S800
    firewire_core: created device fw2: GUID 0001d202e06800d1, S800
turns into
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800
    firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5
    firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800
    firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800

This increases the module size slightly; to keep this in check, turn the
former printk wrapper macros into functions.  Their implementation is
largely copied from driver core's dev_printk counterparts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter 8408dc1c14 firewire: net: use dev_printk API
Change the log line prefix from "firewire_net: " to "net firewire0: "
etc. for the case that several RFC 2734 interfaces are being used in the
same machine.

Note, the netdev_printk API is not very useful to firewire-net.
netdev_notice(net, "abc\n") would result in irritating messages like
"firewire_ohci 0000:0a:00.0: firewire0: abc".  Nor would a dev_printk on
the fw_unit.device to which firewire-net is being bound be useful,
because there are generally multiple ones of those per interface (from
all RFC 2734 peers on the bus, the local node being only one of them).

In the initialization message of each interface, log the PCI device
name of the card which is parent of the netdevice instead of the GUID
of the peer which was semi-randomly used to establish the netdevice.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter 59759ff6f1 firewire: net: identify to driver core as "firewire_net", not "net"
On second thought, there is little reason to have driver name differ
from module name.  Therefore, change
    /sys/bus/firewire/drivers/net
    /sys/bus/firewire/devices/fw0.0/driver -> [...]/net
    /sys/module/firewire_net/drivers/firewire:net
to
    /sys/bus/firewire/drivers/firewire_net
    /sys/bus/firewire/devices/fw0.0/driver -> [...]/firewire_net
    /sys/module/firewire_net/drivers/firewire:firewire_net
It is redundant but consistent with firewire-sbp2's recently changed
driver name.

I don't see this anywhere used, so it should not matter either way.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter 0c22ecdebb firewire: sbp2: identify to driver core as "firewire_sbp2", not "sbp2"
Commit eba9ebaaa2 "firewire: sbp2: use dev_printk API" changed
messages from e.g.
    firewire_sbp2: fw3.0: logged in to LUN 0000 (0 retries)
to
    sbp2 fw3.0: logged in to LUN 0000 (0 retries)
because the driver calls itself as "sbp2" when registering with driver
core and with SCSI core.  This is of course confusing, so switch to the
name "firewire_sbp2" for driver core in order to match what lsmod and
/sys/module/ show.  So we are back to
    firewire_sbp2 fw3.0: logged in to LUN 0000 (0 retries)
in the kernel log.

This also changes
    /sys/bus/firewire/drivers/sbp2
    /sys/bus/firewire/devices/fw3.0/driver -> [...]/sbp2
    /sys/module/firewire_sbp2/drivers/firewire:sbp2
to
    /sys/bus/firewire/drivers/firewire_sbp2
    /sys/bus/firewire/devices/fw3.0/driver -> [...]/firewire_sbp2
    /sys/module/firewire_sbp2/drivers/firewire:firewire_sbp2

but "cat /sys/class/scsi_host/host27/proc_name" stays "sbp2" just in
case that proc_name is used by any userland.

The transport detection in lsscsi is not affected.  (Tested with lsscsi
version 0.25.)  Udev's /dev/disk/by-id and by-path symlinks are not
affected either.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:35:59 +01:00
Stefan Richter 320cfa6ce0 firewire: ohci: disable MSI on Ricoh controllers
The PCIe device

    FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller
    [1180:e832] (prog-if 10 [OHCI])

is unable to access attached FireWire devices when MSI is enabled but
works if MSI is disabled.
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html

Hence add the "disable MSI" quirks flag for this device, or in fact for
safety and simplicity for all current (R5U230, R5U231, R5U240) and
future Ricoh PCIe 1394 controllers.

Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-30 21:33:34 +01:00
Clemens Ladisch d1bb399ad0 firewire: ohci: add reset packet quirk for SB Audigy
The Audigy's SB1394 controller is actually from Texas Instruments
and has the same bus reset packet generation bug, so it needs the
same quirk entry.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-26 22:53:17 +01:00
Stefan Richter eba9ebaaa2 firewire: sbp2: use dev_printk API
All messages are uniformly prefixed by driver name and device name now.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:21 +01:00
Stefan Richter 64d2172019 firewire: ohci: use dev_printk API
All messages are uniformly prefixed by driver name and device name now.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:21 +01:00
Stefan Richter 2107622684 firewire: move fw_device reference counting from drivers to core
fw_unit device drivers invariably need to talk to the fw_unit's parent
(an fw_device) and grandparent (an fw_card).  firewire-core already
maintains an fw_card reference for the entire lifetime of an fw_device.
Likewise, let firewire-core maintain an fw_device reference for the
entire lifetime of an fw_unit so that fw_unit drivers don't have to.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:20 +01:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Paul Gortmaker 823467e5fc drivers/firewire: Add export.h for EXPORT_SYMBOL to core-iso.c
Ensure that the EXPORT_SYMBOL macros are present for when we clean up
the "module.h" is everywhere situation, to prevent build failures.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:46 -04:00
Clemens Ladisch a572e688cf firewire: ohci: fix isochronous DMA synchronization
Add the dma_sync_single_* calls necessary to ensure proper cache
synchronization for isochronous data buffers on non-coherent
architectures.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-18 12:32:39 +02:00