Commit Graph

22 Commits

Author SHA1 Message Date
Thomas Gleixner 293a7a0a16 genirq: Provide means to retrigger parent
Attempts to retrigger nested threaded IRQs currently fail because they
have no primary handler. In order to support retrigger of nested
IRQs, the parent IRQ needs to be retriggered.

To fix, when an IRQ needs to be resent, if the interrupt has a parent
IRQ and runs in the context of the parent IRQ, then resend the parent.

Also, handle_nested_irq() needs to clear the replay flag like the
other handlers, otherwise check_irq_resend() will set it and it will
never be cleared.  Without clearing, it results in the first resend
working fine, but check_irq_resend() returning early on subsequent
resends because the replay flag is still set.

Problem discovered on ARM/OMAP platforms where a nested IRQ that's
also a wakeup IRQ happens late in suspend and needed to be retriggered
during the resume process.

[khilman@ti.com: changelog edits, clear IRQS_REPLAY in handle_nested_irq()]

Reported-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1350425269-11489-1-git-send-email-khilman@deeprootsystems.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-11-01 12:11:31 +01:00
Thomas Gleixner d4dc0f90d2 genirq: Allow check_wakeup_irqs to notice level-triggered interrupts
Level triggered interrupts do not cause IRQS_PENDING to be set when
they fire while "disabled" as the 'pending' state is always present in
the level - they automatically refire where re-enabled.

However the IRQS_PENDING flag is also used to abort a suspend cycle -
if any 'is_wakeup_set' interrupt is PENDING, check_wakeup_irqs() will
cause suspend to abort. Without IRQS_PENDING, suspend won't abort.

Consequently, level-triggered interrupts that fire during the 'noirq'
phase of suspend do not currently abort suspend.

So set IRQS_PENDING even for level triggered interrupts, and make sure
to clear the flag in check_irq_resend.

[ Changelog by courtesy of Neil ]

Tested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-04 23:38:50 +02:00
Thomas Gleixner 0c6f8a8b91 genirq: Remove compat code
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Thomas Gleixner 876dbd4cc1 genirq: Mirror irq trigger type bits in irq_data.state
That's the data structure chip functions get provided. Also allow them
to signal the core code that they updated the flags in irq_data.state
by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged.

The type bits should be accessed via:

val = irqd_get_trigger_type(irqdata);
and
irqd_set_trigger_type(irqdata, val);

Coders who access them directly will be tracked down and slapped with
stinking trouts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:20 +01:00
Thomas Gleixner 2a0d6fb335 genirq: Move IRQ_PENDING flag to core
Keep status in sync until all users are fixed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:17 +01:00
Thomas Gleixner 163ef30911 genirq: Move IRQ_REPLAY and IRQ_WAITING to core
No users outside of core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:16 +01:00
Thomas Gleixner 3aae994fb0 genirq: Consolidate IRQ_DISABLED
Handle IRQ_DISABLED consistent.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:11 +01:00
Thomas Gleixner 87923470c7 genirq: Consolidate disable/enable
Create irq_disable/enable and use them to keep the flags consistent.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:10 +01:00
Thomas Gleixner c1ee626428 genirq: Prevent access beyond allocated_irqs bitmap
Lars-Peter Clausen pointed out:

   I stumbled upon this while looking through the existing archs using
   SPARSE_IRQ.  Even with SPARSE_IRQ the NR_IRQS is still the upper
   limit for the number of IRQs.

   Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with
   IRQ_BOARD_START being the number of IRQs used by the core.

   In various machine files the nr_irqs field of the ARM machine
   defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS".

   As a result "nr_irqs" will greater then NR_IRQS which then again
   causes the "allocated_irqs" bitmap in the core irq code to be
   accessed beyond its size overwriting unrelated data.

The core code really misses a sanity check there.

This went unnoticed so far as by chance the compiler/linker places
data behind that bitmap which gets initialized later on those affected
platforms.

So the obvious fix would be to add a sanity check in early_irq_init()
and break all affected platforms. Though that check wants to be
backported to stable as well, which will require to fix all known
problematic platforms and probably some more yet not known ones as
well. Lots of churn.

A way simpler solution is to allocate a slightly larger bitmap and
avoid the whole churn w/o breaking anything. Add a few warnings when
an arch returns utter crap.

Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # .37
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
2011-02-19 12:10:51 +01:00
Thomas Gleixner 21e2b8c62c genirq: Provide compat handling for chip->retrigger()
Wrap the old chip function retrigger() until the migration is complete
and the old chip functions are removed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121843.025801092@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 12:43:50 +02:00
Thomas Gleixner c5f756344c genirq: Provide compat handling for chip->enable()
Wrap the old chip function enable() until the migration is complete and
the old chip functions are removed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.437159182@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 12:43:42 +02:00
Thomas Gleixner 6b8ff3120c genirq: Convert core code to irq_data
Convert all references in the core code to orq, chip, handler_data,
chip_data, msi_desc, affinity to irq_data.*

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 12:36:26 +02:00
Bartlomiej Zolnierkiewicz c36ba80ea0 irq: Remove superfluous NULL pointer check in check_irq_resend()
This takes care of the following entry from Dan's list:

kernel/irq/resend.c +73 check_irq_resend(17) warning: variable derefenced before check 'desc->chip'

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
LKML-Reference: <200908062146.03638.bzolnier@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:44:29 +02:00
Yinghai Lu 08678b0841 generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.

Preallocate 32 irq_desc, and irq_desc() will try to get more.

( No change in functionality is expected anywhere, except the odd build
  failure where we missed a code site or where a crossing commit itroduces
  new irq_desc[] usage. )

v2: according to Eric, change get_irq_desc() to irq_desc()

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:29 +02:00
Yinghai Lu 85c0f90978 irq: introduce nr_irqs
at this point nr_irqs is equal NR_IRQS

convert a few easy users from NR_IRQS to dynamic nr_irqs.

v2: according to Eric, we need to take care of arch without generic_hardirqs

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:05 +02:00
Thomas Gleixner 2464286ace genirq: suppress resend of level interrupts
Level type interrupts are resent by the interrupt hardware when they are
still active at irq_enable().

Suppress the resend mechanism for interrupts marked as level.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Linus Torvalds 88ffc35059 Revert "genirq: temporary fix for level-triggered IRQ resend"
This reverts commit 0fc4969b86.  It was
always meant to be temporary, but it's generating more useless noise
than anything else, and we probably should never have done it in the
generic kernel (only had the people involved test it on their own).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:10:16 -07:00
Thomas Gleixner 0fc4969b86 genirq: temporary fix for level-triggered IRQ resend
Marcin Slusarz reported a ne2k-pci "hung network interface" regression.

delayed disable relies on the ability to re-trigger the interrupt in the
case that a real interrupt happens after the software disable was set.
In this case we actually disable the interrupt on the hardware level
_after_ it occurred.

On enable_irq, we need to re-trigger the interrupt. On i386 this relies
on a hardware resend mechanism (send_IPI_self()).

Actually we only need the resend for edge type interrupts. Level type
interrupts come back once enable_irq() re-enables the interrupt line.

I assume that the interrupt in question is level triggered because it is
shared and above the legacy irqs 0-15:

	17:         12   IO-APIC-fasteoi   eth1, eth0

Looking into the IO_APIC code, the resend via send_IPI_self() happens
unconditionally. So the resend is done for level and edge interrupts.
This makes the problem more mysterious.

The code in question lib8390.c does

	disable_irq();
	fiddle_with_the_network_card_hardware()
	enable_irq();

The fiddle_with_the_network_card_hardware() might cause interrupts,
which are cleared in the same code path again,

Marcin found that when he disables the irq line on the hardware level
(removing the delayed disable) the card is kept alive.

So the difference is that we can get a resend on enable_irq, when an
interrupt happens during the time, where we are in the disabled region.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01 20:46:22 -07:00
Frederik Deweerdt e317c8ccaa [PATCH] ixp4xxdefconfig arm fixes
With the following patch, the ixp4xxdefconfig builds correctly.  I'll
test some more configs if I get some time.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 12:11:08 -07:00
Imre Deak e1ed7ac77b [PATCH] genirq: fix typo in IRQ resend
Fix a bug where the IRQ_PENDING flag is never cleared and the ISR is called
endlessly without an actual interrupt.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16 12:54:30 -07:00
Thomas Gleixner 6a6de9ef58 [PATCH] genirq: core
Core genirq support: add the irq-chip and irq-flow abstractions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:24 -07:00
Thomas Gleixner a4633adcdb [PATCH] genirq: add genirq sw IRQ-retrigger
Enable platforms that do not have a hardware-assisted hardirq-resend mechanism
to resend them via a softirq-driven IRQ emulation mechanism.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:23 -07:00