Commit Graph

114 Commits

Author SHA1 Message Date
Mark Brown 7cc289b9c6
Merge remote-tracking branches 'asoc/topic/mxs', 'asoc/topic/mxs-sgtl5000', 'asoc/topic/nau8540', 'asoc/topic/nau8824' and 'asoc/topic/nau8825' into asoc-next 2018-01-18 11:56:05 +00:00
Fabio Estevam d04c413f2a
ASoC: mxs-sgtl5000: Do not print error on probe deferral
Probe deferral may happen, so do not print an error message in this
case.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-18 10:59:07 +00:00
Christian Fischer 949293d45d
ASoC: mxs-sgtl5000: add audio-routing support
Add dapm_widgets to machine-driver (from imx-sgtl5000).
If the "audio-routing"-property is present at probing the dapm-widgets
getting linked to the card.

Signed-off-by: Christian Fischer <fischerc@swissphone.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12 21:23:47 +00:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Mark Brown af4f47717f Merge remote-tracking branches 'asoc/topic/mtk', 'asoc/topic/mxs', 'asoc/topic/nau8825', 'asoc/topic/nuc900' and 'asoc/topic/of-graph' into asoc-next 2017-09-01 12:12:48 +01:00
Donglin Peng 4c316783ee ASoC: mxs-sgtl5000: Remove unnecessary function call
First of all,the address of pdev->dev is assigned to card->dev,then
the function platform_set_drvdata copies the value the variable card
to pdev->dev.driver_data, but when calling snd_soc_register_card,the
function dev_set_drvdata(card->dev, card) will also do the same copy
operation,so i think that the former copy operation can be removed.

Signed-off-by: Peng Donglin <dolinux.peng@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21 17:13:30 +01:00
Arvind Yadav 0d97ee8679 ASoC: mxs-saif: Handle return value of clk_prepare_enable/clk_prepare.
clk_prepare_enable() and clk_prepare() can fail here and
we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26 13:00:56 +01:00
Jörg Krause bcb8c27082 ASoC: mxs-saif: fix setting master base rate
The SAIF base oversample rates are either 512*fs or 384*fs. An additional
divider exists within the SAIF to generate sub-multiples of these two base
rates if MCLK is required by the codec.

 * The sub-rates for the 512x base rate are: 256x, 128x, 64x, and 32x.
 * The sub-rates for the 384x base rate are: 192x, 96x, and 48x.

Setting the base rate depending on the modulo operation with 32 and 48
give wrong results for some mclk.

If mclk=18.432MHz both modulo operations results in 0. As testing the
result with 32 is done first, a wrong base rate of 512*fs is set instead
of the correct 384*fs.

Fix this by setting the base rate depending on the calculated sub-rate.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17 18:19:36 +00:00
Jörg Krause b25658ed7d ASoC: mxs-saif: fix setting SAIF1 register
If SAIF0 is used in master and SAIF1 in slave mode setting the SAIF1
register in mxs_saif_set_dai_fmt() does not have any effect on the
interface as the clk gate needs to be cleared before the register can be
written.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17 18:19:36 +00:00
Mark Brown fba3040105 Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/es8328', 'asoc/topic/extcon' and 'asoc/topic/fsl' into asoc-next 2016-12-12 15:52:58 +00:00
Alexey Khoroshilov e1b790a872 SoC: mxs-saif: check validity of ids in mxs_saif_probe()
There is a check for validity of one of ids in mxs_saif_probe(),
while array dereferece is made by the other id.

The patch adds the check for the second saif id.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 11:14:32 +01:00
Julia Lawall 9b6fdef62b ASoC: constify snd_soc_ops structures
Check for snd_soc_ops structures that are only stored in the ops field of a
snd_soc_dai_link structure.  This field is declared const, so snd_soc_ops
structures that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_soc_ops i@p = { ... };

@ok1@
identifier r.i;
struct snd_soc_dai_link e;
position p;
@@
e.ops = &i@p;

@ok2@
identifier r.i, e;
position p;
@@
struct snd_soc_dai_link e[] = { ..., { .ops = &i@p, }, ..., };

@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct snd_soc_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct snd_soc_ops i = { ... };
// </smpl>

The effect on the layout of the .o files is shown by the following output
of the size command, first before then after the transformation:

   text    data     bss     dec     hex filename
   4500     696       0    5196    144c sound/soc/generic/simple-card.o
   4564     632       0    5196    144c sound/soc/generic/simple-card.o

   text    data     bss     dec     hex filename
   3018     608       0    3626     e2a sound/soc/generic/simple-scu-card.o
   3074     544       0    3618     e22 sound/soc/generic/simple-scu-card.o

   text    data     bss     dec     hex filename
   4148    2448     768    7364    1cc4 sound/soc/intel/boards/bdw-rt5677.o
   4212    2384     768    7364    1cc4 sound/soc/intel/boards/bdw-rt5677.o

   text    data     bss     dec     hex filename
   5403    4628     384   10415    28af sound/soc/intel/boards/bxt_da7219_max98357a.o
   5531    4516     384   10431    28bf sound/soc/intel/boards/bxt_da7219_max98357a.o

   text    data     bss     dec     hex filename
   5275    4496     384   10155    27ab sound/soc/intel/boards/bxt_rt298.o
   5403    4368     384   10155    27ab sound/soc/intel/boards/bxt_rt298.o

   text    data     bss     dec     hex filename
  10017    2344      48   12409    3079 sound/soc/intel/boards/bytcr_rt5640.o
  10145    2232      48   12425    3089 sound/soc/intel/boards/bytcr_rt5640.o

   text    data     bss     dec     hex filename
   3719    2356       0    6075    17bb sound/soc/intel/boards/bytcr_rt5651.o
   3847    2244       0    6091    17cb sound/soc/intel/boards/bytcr_rt5651.o

   text    data     bss     dec     hex filename
   3598    2392       0    5990    1766 sound/soc/intel/boards/cht_bsw_max98090_ti.o
   3726    2280       0    6006    1776 sound/soc/intel/boards/cht_bsw_max98090_ti.o

   text    data     bss     dec     hex filename
   5343    3624      16    8983    2317 sound/soc/intel/boards/cht_bsw_rt5645.o
   5471    3496      16    8983    2317 sound/soc/intel/boards/cht_bsw_rt5645.o

   text    data     bss     dec     hex filename
   4662    2592     384    7638    1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o
   4790    2464     384    7638    1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o

   text    data     bss     dec     hex filename
   1595    2528       0    4123    101b sound/soc/intel/boards/haswell.o
   1659    2472       0    4131    1023 sound/soc/intel/boards/haswell.o

   text    data     bss     dec     hex filename
   6272    4760     416   11448    2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o
   6464    4568     416   11448    2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o

   text    data     bss     dec     hex filename
   7075    4888     416   12379    305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o
   7267    4696     416   12379    305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o

   text    data     bss     dec     hex filename
   5659    4496     384   10539    292b sound/soc/intel/boards/skl_rt286.o
   5787    4368     384   10539    292b sound/soc/intel/boards/skl_rt286.o

   text    data     bss     dec     hex filename
   1721    2048       0    3769     eb9 sound/soc/kirkwood/armada-370-db.o
   1769    1976       0    3745     ea1 sound/soc/kirkwood/armada-370-db.o

   text    data     bss     dec     hex filename
   1363    1792       0    3155     c53 sound/soc/mxs/mxs-sgtl5000.o
   1427    1728       0    3155     c53 sound/soc/mxs/mxs-sgtl5000.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 18:34:55 +01:00
Mark Brown 88f183484a Merge remote-tracking branches 'asoc/topic/max98926', 'asoc/topic/mtk', 'asoc/topic/mxs-saif', 'asoc/topic/nau8825' and 'asoc/topic/omap' into asoc-next 2016-03-13 15:17:18 +07:00
Mans Rullgard 436e056c4b ASoC: mxs-saif: check BUSY bit in hw_params() only if not mclk_in_use
If something else, typically a codec, has enabled mclk, the BUSY
bit may be set when hw_params() is called without this being an
error.  This check thus causes intermittent failures to configure
the sound device when used in such a manner.  Fix this by making
the test conditional on !saif->mclk_in_use.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-05 13:22:49 +00:00
Mans Rullgard f212c6d8c2 ASoC: mxs-saif: fix clk_prepare() without matching clk_unprepare()
The clk_prepare() call in hw_params() has no matching clk_unprepare(),
leaving the clk with an ever-increasing prepare count.  Moreover,
hw_params() can be called multiple times which would again leave us
with a runaway prepare count.  Fix this by moving the clk_prepare()
call to the startup() function and adding a shutdown() function with
a matching clk_unprepare() as these operations are already correctly
bracketed by soc-core.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 13:20:45 +00:00
Axel Lin 5b73de19fd ASoC: mxs-sgtl5000: Convert to devm_snd_soc_register_card
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 18:33:17 +01:00
Mark Brown 4f1eacf544 Merge remote-tracking branches 'asoc/topic/fsl-spdif', 'asoc/topic/imx', 'asoc/topic/intel', 'asoc/topic/mxs-saif' and 'asoc/topic/nuc900' into asoc-next 2015-02-04 20:57:13 +00:00
Lars-Peter Clausen bc6a5d649b ASoC: mxs-sgtl5000: Use static DAI format setup
Set the dai_fmt field in the dai_link struct instead of manually calling
snd_soc_dai_fmt(). This makes the code cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-06 17:34:27 +00:00
Fabio Estevam 5396ecf7b1 ASoC: mxs-saif: Do not store the irq number in the private structure
The irq number is only used inside the probe function, so there is really no
need to store it in the private structure.

Use a local 'irq' variable to hold the the irq number instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:44:53 +00:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Mark Brown c9098c6120 Merge remote-tracking branches 'asoc/topic/multi-codec', 'asoc/topic/mxs-saif', 'asoc/topic/mxs-sgtl5000', 'asoc/topic/omap' and 'asoc/topic/pxa' into asoc-next 2014-12-08 13:12:05 +00:00
Fabio Estevam d206f66177 ASoC: mxs-sgtl5000: Remove MCLK restriction
According to the sgtl5000 datasheet the MCLK frequency range restriction of
8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode.

mxs-sgtl5000 machine sets the codec as slave, and mx28 generates MCLK in the
range of 256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK
input.

In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we
want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the
current check would return -EINVAL, which is not correct.

Remove the 8 to 27MHz frequency check, since this only applies to the
synchronous SYS_MCLK input case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 17:42:16 +00:00
Fabio Estevam 8c2727f97b ASoC: mxs: mxs-saif: Register the irq with the device name
Instead of registering the irq name with the driver name, it's better to pass
the device name so that we have a more explicit indication as to what saif
instance the irq is related:

$ cat /proc/interrupts
           CPU0
...
214:          4         -  59  80042000.saif
215:          0         -  58  80046000.saif

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10 19:58:31 +00:00
Wolfram Sang 38b089d78b ASoC: mxs: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:10 +02:00
Mark Brown 701caa51a2 Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', 'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai 2014-01-16 12:44:01 +00:00
Lars-Peter Clausen 96ae0f08ac ASoC: mxs: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
Since commit 7b11304 ("dma: mxs-dma: Report correct residue for cyclic DMA")
the mxs dmaengine driver has support for residue reporting. So there is no need
to specify the SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag anymore. This allows a
finer grained resolution for the PCM pointer as well as avoids the race
condition that can occur with the period counting that is used when the
dmaengine driver does not support residue reporting.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07 11:41:36 +00:00
Lars-Peter Clausen f3b6079683 ASoC: mxs: Don't set unused struct snd_pcm_hardware fields
The ASoC core assumes that the PCM component of the ASoC card transparently
moves data around and does not impose any restrictions on the memory layout or
the transfer speed. It ignores all fields from the snd_pcm_hardware struct for
the PCM driver that are related to this. Setting these fields in the PCM driver
might suggest otherwise though, so rather not set them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07 11:41:32 +00:00
Mark Brown 2cde51fbd0 Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', 'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next 2014-01-02 13:01:55 +00:00
Matthew Garrett 05004cb4cd ASoC: fsl/mxs: Remove unnecessarily gendered language
The kernel as a number of cases of gendered language. The majority of these
refer to objects that don't have gender in English, and so I've replaced
them with "it" and "its". Some refer to people (developers or users), and
I've replaced these with the singular "they" variant. Some are simply
typos that I've fixed up.

I've left cases where gendered language was used to refer to specific
individuals, was a quote or is part of license text.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19 15:03:37 +00:00
Mark Brown dd407a3243 ASoC: fsl/mxs: Remove unnecessarily gendered language
The kernel as a number of cases of gendered language. The majority of these
refer to objects that don't have gender in English, and so I've replaced
them with "it" and "its". Some refer to people (developers or users), and
I've replaced these with the singular "they" variant. Some are simply
typos that I've fixed up.

I've left cases where gendered language was used to refer to specific
individuals, was a quote or is part of license text.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18 13:51:32 +00:00
Lars-Peter Clausen 2650bc4f6d ASoC: mxs: Use devm_snd_dmaengine_pcm_register()
Makes the code shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02 11:49:36 +00:00
Mark Brown 10abe843d5 Merge remote-tracking branch 'asoc/topic/mxs' into asoc-next 2013-10-24 11:24:09 +01:00
Markus Pargmann 863ebddec8 ASoC: mxs-saif: Handle errors in trigger function
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14 18:01:50 +01:00
Markus Pargmann 88cf632a13 ASoC: mxs-saif: Store saif state
Trigger commands may be passed multiple times. To avoid errors with
clk_enable/disable, store the saif state and return if saif is already
running/stopped.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14 18:01:50 +01:00
Sachin Kamat fcd70eb50e ASoC: mxs-saif: Use devm_snd_soc_register_component
devm_snd_soc_register_component makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-19 14:57:37 +01:00
Fabio Estevam 38f2b8cbfb ASoC: mxs: mxs-sgtl5000: Simplify probe function
mxs is a device tree only platform, which allows us to simplify a bit
mxs_sgtl5000_probe(), because there is no need to check whether device tree is
supported or not.

Remove mxs_sgtl5000_probe_dt() and place its content inside mxs_sgtl5000_probe()
for making the code simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:40:10 +01:00
Mark Brown 90d561bed9 Merge remote-tracking branch 'asoc/topic/fsl' into tmp 2013-09-01 21:15:52 +01:00
Fabio Estevam a90e6053ba ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
On a mx28 board, running "aplay -l" and "arecord -l" results in the following:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

,which is not correct because we got a capture device listed in aplay and a
playback device listed in arecord.

On mx28 there are two serial audio interface ports (SAIF0 and SAIF1) and each
one of them are unidirectional.

Allow to specify a dai link as 'playback_only' or 'capture_only', which suits
well for this case.

After this change we can correctly report the capabilities as follows:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: HiFi Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: HiFi Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Also tested playback and capture on the mx28evk board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01 16:29:27 +01:00
Lothar Waßmann d66a5b9c82 ASoC: mxs: add some error messages to help identifying problems
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 19:03:19 +01:00
Mark Brown 315d9c649f ASoC: mxs: Depends on COMMON_CLK
The SAIF driver is a clock provider so specifically needs the common
clock implementedation.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-22 14:19:21 +01:00
Mark Brown 204f029155 ASoC: mxs: Remove unneeded mach-types.h inclusions
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-22 11:02:13 +01:00
Mark Brown 8ccbc3ebe9 ASoC: mxs: Enable COMPILE_TEST builds
Since DT based boards don't have any dependency on arch/arm enable them
if COMPILE_TEST is enabled.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 12:09:19 +01:00
Mark Brown 1b36881105 Merge remote-tracking branch 'asoc/fix/mxs' into asoc-linus 2013-07-04 18:30:02 +01:00
Shawn Guo 7c9e6150f2 ASoC: mxs: register saif mclk to clock framework
Mostly the mxs system design uses saif0 mclk output as the clock source
of codec.  Since the mclk is implemented as a general divider with the
saif clk as the parent clock, let's register the mclk as a basic
clk-divider to common clock framework.  Then with it being a clock
provdier, clk_get() call in codec driver probe function will just work.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-01 11:12:20 +01:00
Mark Brown c76a507bfe Merge remote-tracking branch 'asoc/topic/mxs' into asoc-next 2013-06-17 17:20:23 +01:00
Shawn Guo 62477adf5f ASoC: mxs: move to use generic DMA helper
With mxs-dma converted to generic DMA bindings, let's move mxs-pcm to
use it by removing flages SND_DMAENGINE_PCM_FLAG_NO_DT and
SND_DMAENGINE_PCM_FLAG_COMPAT.  As the result, those mxs custom dma
params code can be removed now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13 09:55:28 +04:00
Fabio Estevam e76af6d189 ASoC: mxs: mxs-saif: Let device core handle pinctrl
Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for handling pinctrl.

So remove devm_pinctrl_get_select_default() from the driver.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 20:47:51 +04:00
Fabio Estevam 666c25e3d7 ASoC: mxs-sgtl5000: Remove unneeded fields from snd_soc_dai_link
It makes no sense to hardcode the I2C bus into the codec_name field.

cpu_dai_name and platform_name are also overwritten later in
mxs_sgtl5000_probe_dt().

So remove the three fields, as mxs platform is dt-only platform.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 20:45:34 +04:00
Fabio Estevam f8b24fcbd0 ASoC: mxs-sgtl5000: Remove unneeded 'ret' variable
Variable 'ret' is not needed here, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 20:45:34 +04:00
Linus Torvalds 9992ba7232 sound updates for v3.10-rc1
Mostly many small changes spread as seen in diffstat in sound/*
 directory by this update.  A significant change in the subsystem level
 is the introduction of snd_soc_component, which will help more generic
 handling of SoC and off-SoC components.
 
 Also, snd_BUG_ON() macro is enabled unconditionally now due to its
 misuses, so people might hit kernel warnings (it's a good thing for
 us).
 
 - compress-offload: support for capture by Charles Keepax
 - HD-audio: codec delay support by Dylan Reid
 - HD-audio: improvements/fixes in generic parser: better headphone mic
   and headset mic support, jack_modes hint consolidation, proper beep
   attach/detachment, generalized power filter controls by David
   Henningsson, et al
 - HD-audio: Improved management of HDMI codec pins/converters
 - HD-audio: Better pin/DAC assignment for VIA codecs
 - HD-audio: Haswell HDMI workarounds
 - HD-audio: ALC268 codec support, a few new quirks for Chromebooks
 - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency
   fix by Clemens Ladisch
 - USB: support for DSD formats by Daniel Mack
 - USB: A few UAC2 device endian/cock fixes by Eldad Zack
 - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller,
   Yamaha THRxx devices
 - HDSPM: updates for TCO controls by Adrian Knoth
 - ASoC: Add a snd_soc_component object type for generic handling of
   SoC and off-SoC components by Kuninori Morimoto,
 - dmaengine: a large set of cleanups and conversions by Lars-Peter
   Clausen
 - ASoC DAPM: performance optimizations from Ryo Tsutsui
 - ASoC DAPM: support for mixer control sharing by Stephen Warren
 - ASoC: multiplatform ARM cleanups from Arnd Bergmann
 - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRg2bUAAoJEGwxgFQ9KSmksasQAIq1ypbylrLA3vf7PUXmL7Jb
 hMtC5tzasZqJsIZ2fyhiZL8J5yQ78Z5dhjehFWlCbJEaKhsjZVyb67RpuK597b6K
 Ypa30OghbWuCoKjmaXK9AFTuijTxdefmewIJfgwVMYtgA5rBU70qt96NC/b/UQXk
 gEPI740i7EFJL2wfcqRpGoKGO1o80yMuKzIj3gHUZMFHYYhPgvVuGt9cCe3cXwLV
 IBT77PjMoGt1Q7iJQkX4DGlB5n526l1G8a6VptdCou0qyEWfhgSik5I3msNuAXte
 1KYE4zj0Rq4xqN28/D/eAF1o3q+X9aiLttGpG0sJLiwGagdWVFaXLyJDMhZxCbwz
 1F4k+B8UCucojw3HtNzoIQJezoRX2aHMjlAZ50b416hITkg5VQe5+sJBxpjIJo4I
 GSmizUiNahDk9jtI/PEGo7yr8CdRTY3v38mdZRGYxyWgJ1a8sNwQwqUdH6A0D/w6
 3wMp4Y9Zt8AK/kiWLLWvsDVvwRptqplrXistTvv4v2xVJgvU+klDsDpa5Lz7kG7Z
 q43RA4o+yWdG6d1hTgMXp7FGwUkcer7WKWEmAZsQmX03Q0zjZqMhfUwVUtaHIx9c
 6YipHdVMAJ0sz/dYrKnZ92hbZcXNj/A9zfqYWeFlA/18FCO6u4BXODBup8BLwyUm
 hfOv+M/q6haNA98GDHS9
 =sYiI
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Mostly many small changes spread as seen in diffstat in sound/*
  directory by this update.  A significant change in the subsystem level
  is the introduction of snd_soc_component, which will help more generic
  handling of SoC and off-SoC components.

  Also, snd_BUG_ON() macro is enabled unconditionally now due to its
  misuses, so people might hit kernel warnings (it's a good thing for
  us).

   - compress-offload: support for capture by Charles Keepax
   - HD-audio: codec delay support by Dylan Reid
   - HD-audio: improvements/fixes in generic parser: better headphone
     mic and headset mic support, jack_modes hint consolidation, proper
     beep attach/detachment, generalized power filter controls by David
     Henningsson, et al
   - HD-audio: Improved management of HDMI codec pins/converters
   - HD-audio: Better pin/DAC assignment for VIA codecs
   - HD-audio: Haswell HDMI workarounds
   - HD-audio: ALC268 codec support, a few new quirks for Chromebooks
   - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency
     fix by Clemens Ladisch
   - USB: support for DSD formats by Daniel Mack
   - USB: A few UAC2 device endian/cock fixes by Eldad Zack
   - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller,
     Yamaha THRxx devices
   - HDSPM: updates for TCO controls by Adrian Knoth
   - ASoC: Add a snd_soc_component object type for generic handling of
     SoC and off-SoC components by Kuninori Morimoto,
   - dmaengine: a large set of cleanups and conversions by Lars-Peter
     Clausen
   - ASoC DAPM: performance optimizations from Ryo Tsutsui
   - ASoC DAPM: support for mixer control sharing by Stephen Warren
   - ASoC: multiplatform ARM cleanups from Arnd Bergmann
   - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits)
  ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
  ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats
  ALSA: pcm_format_to_bits strong-typed conversion
  ALSA: compress: fix the states to check for allowing read
  ALSA: hda - Move Thinkpad X220 to use auto parser
  ALSA: USB: adjust for changed 3.8 USB API
  ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources
  sound: oss/dmabuf: use dma_map_single
  ALSA: ali5451: use mdelay instead of large udelay constants
  ALSA: hda - Add the support for ALC286 codec
  ALSA: usb-audio: USB quirk for Yamaha THR10C
  ALSA: usb-audio: USB quirk for Yamaha THR5A
  ALSA: usb-audio: USB quirk for Yamaha THR10
  ALSA: usb-audio: Fix autopm error during probing
  ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT
  ALSA: sound kconfig typo
  ALSA: emu10k1: Fix dock firmware loading
  ASoC: ux500: forward declare msp_i2s_platform_data
  ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes
  ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers
  ...
2013-05-03 09:10:23 -07:00